Oracle Developer 6i (forms & reports)

Hi,
I'm searching Patch13 for Oracle Developer 6i.
I don't know metalink number of patch. Could you give me link to this patch or metalink number of this patch??

Quick links to latest patchsets ==> Oracle Developer ==> <platform> ==> 6i ==> voilà!
Werner

Similar Messages

How to avoid error while install oracle developer suite10g(forms & reports)

hi dear all in recent times i am trying to install oracle developer suite 10g to learn forms and reports in my lap having windows 7 ultimate version ,32 bit,2.56 GB of ram .I downloaded two files ds_windows_x86_101202_disk1 and ds_window_x86_101202_disk2 and i downloaded Oracle universal Installer but i am unable to complete installation process ,When i click on complete(1.11gb) version which include forms,reports,xml,j developer I am facing this type of error message
"Install has encountered an error while attempting to verify your virtual settings.please verify that the sum of the initial sizes of the paging files is at least 256 mb"
Could any one help how to avoid this type of error message ? or else is there any other way to download Oracle forms and reports version

Ok, Oracle Developer Suite (ODS) 10g (Forms/Reports) was not designed for Windows 7. In order to the ODS you must follow these steps for the installation to be successful.
1. You must set the Virtual Memory (VM) size. The Oracle installer can not read Windows Managed VM. See the Microsoft article Change the size of virtual memory for more information on setting the VM size.
2. The Oracle Installer does not recognize the internal version number of Windows 7, so you have to set the compatibility mode on the Setup.exe to Windows XP. Right-Click the SETUP.EXE and select properties. Then click the Compatibility Tab and in the Compatibility Mode area set this to "Run this program in compatibility mode" and select "Windows XP SP3".
3. You must run the ODS setup.exe as the Administrator. Right-click the setup.exe and select "Run as Administrator".
Having done these three steps, your installation should be successful.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Developer 6i Forms/Reports for AIX-Based 5L

Hi,
Where can I find the download link for Developer 6i Forms/Reports for AIX-Based 5L (64-bit) from Oracle website?? I can only find Developer 6i for Linux/Solaris/Windows..
Thanks,
Kelvin

Quick links to latest patchsets ==> Oracle Developer ==> <platform> ==> 6i ==> voilà!
Werner

Configuring my OEM for "Oracle Developer Server Forms Manager"

Hello,
Please help me in configuring my Oracle Developer Server Forms Manager on Oracle Enterprise Manager.
thanks to send me the guidelines
regards
Yogeeraj

Hi,
I have had a look at my installation, and what I did was create two directories called disk1 and disk2, (for the two extracted zip files) and then ran setup in the disk 1 directory. So I don't know if it was aware of the disk 2 directory.
I am re-installing it now. So I will get back to you.
Thank you very much for getting back so quickly.
Regards
Wayne.

How can I convert Oracle Developer 2000 forms?

How can I convert Oracle Developer 2000 forms and menus to the Oracle 9ids forms and menus

Check out the upgrade and migration section on
http://otn.oracle.com/products/forms
We will soon have a new section on OTN about Forms upgrades, keep checking back for more info.

Oracle 10.2.0.3 with Developer 2000 (Form/Report 6i)

Hi Experts
we are using Oracle 9i database and Developer 2000(6i) Last few years. Now I want to replace 9i database with Oracle 10.2.0.3 , in this scenario can Oracle database 10.2 will work with 6i form/report.
what I did. I installed Oracle 10g (10.2) and Developer 2000(6i) on Windows XP and restored data backup. on this machine software working. Now I want to ask how can I run this software on Clients (Windows XP).
My past practice was I used to installed oracle 9i database client with Developer 2000.
now in current scenario what Should I do. because there is no any client installation available on Oracle database 10.2.
how to manage connection client with server (windows Xp).

now in current scenario what Should I do. because there is no any client installation available on Oracle database 10.2.Well First ORACLE 10g Database will work with developer 2000 , But to get oracle client software you have to Raise SR On http://support.oracle.com
Otherwise
You need to upgrade to 11.2.0.2 as i think its not supported with developer 2000 , So you have to upgrade the whole Environment Forms/reports 10g and Database 11g

Oracle Development Suite ( Form Builder + Report Builer ) vs Toad

Hi guys
I a beginner in oracle world and I would like to ask >>>
1- What is the difference between toad and Oracle development suite and which one is better?
2- Could toad be used to create .fmb files ? What is the extension format of toad forms if they exist ?
According to this thread >>>
Diff between Oracle Forms and Toad
Toad cannot be used to create input forms
on the other hand , my friend told me that Toad can be used to fully control your database and development >>> It involves
Objects Creation and management ( Tables -- Indexes ... etc)
Form Creation
Report Creation
all in one application
This thread posing is repeated three times !!!!!!!!!!!!!!!! I don't know how this happened !!!!!!!!!!!!!!!!!
Sorry for inconvenience
Edited by: user2393672 on Sep 10, 2011 4:47 PM

1) toad is only for querying/doing dml against the database
2) form is for having the screen; report for the output of the system. so toad is totally different from form & report
Thanks & Best Regards
HuaMin
Please remember to always mark the reply if it's helpful or related to your issue!

Problems about deploying Oracle web application (Forms, Reports)

I am going to deploy Oracle web applications (Forms and Reports) and plan to use the same server machine for both Application web server and Database server.
1. How can I enable SSL (for data encryption) on Application web server for Oracle Forms ?
2. Since both Application web server and Database server will use the same machine, do I still need Oracle Advanced Security for data transmission between Application web server and Database server if data encryption for transmission is required ?
3. Can I user Oracle Forms to call Oracle Report on web as I did in Client/Server in the past ?
Experts like you may have come across such problems. Would you please give me some opinions/ideas ?
Regards,
Richard

1. check the paper about the Forms servlet architecture on otn forms section for SSL tips.
3. Check the reports and forms integration paper on otn too.

Installing Oracle Fusion Middleware (Forms/Reports) 11g on windows 2012 x64

Hi All,
I'm planning to install oracle fusion middleware 11g (forms/reports) on windows 2012 64 bit.
Once i started the installation of weblog server 10.3.6 it went fine without any error at this stage.
In second stage i tried to configure it, but in the configuration process "*Creating Domain*" is getting failed.
Placed some sample message below from the log file.
[2014-05-22T10:26:30.563+03:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000KOYojYVCWr^pxSP5iW1JVQQa000000,0] Setting valueOf(CREATE_DOMAIN) to:false. Value obtained from:USER
[2014-05-22T10:26:30.563+03:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000KOYojYVCWr^pxSP5iW1JVQQa000000,0] Setting valueOf(EXTEND_DOMAIN) to:false. Value obtained from:USER
[2014-05-22T10:26:30.563+03:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000KOYojYVCWr^pxSP5iW1JVQQa000000,0] Setting valueOf(EXPAND_CLUSTER) to:false. Value obtained from:USER
[2014-05-22T10:26:30.563+03:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid:
[ecid: 0000KOYolfhCWr^pxSP5iW1JVQQa000003,0] Adding Element:CREATE_DOMAIN_ID for writing.
Any help in the regard will be greatly appreciated.
Thanks
Syed

Hi,
1)As per certification matrix Forms and Reports 11.1.1.7.0 is supported on Windows 2012.
   So in order to install Forms and Reports you need to first install the Forms and Reports software binaries then need to run the config.sh command from %ORACLE_HOME%/bin.
   No need to create any domain using the config.sh from Weblogic home.
2)Please see if the below prerequisites were met :-
   . Assign Proper ip, hostname & domain name
. Entry of ip, host name & domain name in etc/hosts file
. Disable anti-virus if any
. Disable ipv6, a
. Disable Windows Firewall, Windows Update & Windows Management Instrumentation at Service level (services.msc)
. Create 2 folder "tmp" & "Java" for temp, jdk & jre installation. And set the path of installed jdk in Environment Variable
Regards,
Prakash.

Oracle Express and forms/reports

Hi there
If we install Oracle Express database on a remote site with single server can we run Oracle forms/reports on the same server that will connect to the Oracle Express database ?

Yes you can. Just create the required Oracle Net conntections and use it in your froms and reports. Ensure that the listener is running.

Can I send values to an Oracle Developer 6i Form from a servlet

I have a Developer Forms 6i application where I launch a servlet which opens a socket to another IP address. The servlet needs to send status messages back to the Developer 6i form. Is this possible? Can the servlet communicate with the form? Remember that the form is served via the applet viewer in the browser. Thanks

You can find an answer for a similar question here:
http://stackoverflow.com/questions/1859248/how-to-change-time-in-datetime
The point is DateTime is immutable, thus you cannot change it.
DateTime StartDateTime = DateTime.Now;
int hour = 5;
int minute = 45;
// hour, minute, second
TimeSpan ts = new TimeSpan(hour, minute, 0);
StartDateTime = StartDateTime.Date.Add(ts);

Oracle developer 4.5 (reports and forms ) upgrade

is there any one have a patchset to update developer suite 4.5?

is there any one have a patchset to update developer suite 4.5? What version are you wanting to upgrade too or are you just looking for the "latest" patchset for Forms 4.5?
If you are looking for a patch that will upgrade your Forms 4.5 to the latest version of Forms, there isn't one. You just install the latest version of Forms and you migrate your Forms 4.5 forms to this version using the Forms Migration utility.
If you are looking for the latest patchset for Forms 4.5, then you will need a support contract with Oracle Support in order to obtain product patchsets. However, I am pretty sure patchsets for Forms 4.5 are no longer available even if you have a support contract. Forms 4.5 is very old!
Craig...

Getting an error while cofiguring Oracle 11g Portal, Forms, reports

Hello All,
I installed the jrockit, weblogic server 10.3.5 and forms 11g 1.1.1.2 and ran the patchset for 11.1.1.3 and I was able to complete those without any problems.
After that I started configuring and creating the domain I encountered the error OPMN start process failed. I tried to resume but it again failed at OPMN restart process.
Ultimately the configuration of the forms failed only because of the above two failures.
I used the following path to configure (Start -> All Programs -> Oracle Classic 11g – Home1 -> Configure Classic Instance) which will invoke configuration wizard.
I think if I can fix the problem with OPMN, I can complete the configuration without problems.
Also I would like to know whether I can follow the steps mentioned in the link (http://www.bea-weblogic.com/how-to-delete-a-weblogic-server-wls-domain.html) to remove the domain
since configuration is already failed.
Could somebody help to resolve this issue.
Thanks in Advance
Ram

Ram,
You didn't read the response in your other thread.
WLS 10.3.5 isn't the right version of WLS to use with Forms 11.1.1.3
John

Calling ActiveX Control in Oracle Developer 2000 - Forms 5

Hi All,
I am looking for sample code to call an ActiveX control from my application.
I have a data input form once i submit the data, the ActiveX control is called and the data is transmitted to a 3rd party application. Could you kindly provide me some pointer here please.
Thanks

You're using a very old version of forms and also of SQL*Net.
to be sure that the problem is forms/sql*net related and not due to other reasons (e.g. network), you could install the current version (forms 10g) and just see if the connect is any faster. If it is, you could try to run Forms 5 with a newer version of the oracle-client /Sql*net to see if that works better.
hope this helps.

Convert oracle developer 6i form into java(jdeveloper)

hi
can any bady tell me how can i change my oracl form to jdeveloper
thanks in advance

You can.
Install the oracle forms tables with system users, you can find the scripts in the path; c:\orant\tools\dbtab60.
You will find several scripts, run those scripts then you can save your forms, menus,.. to database
Regards

Oracle Developer 6i (forms & reports)

Similar Messages

Maybe you are looking for