Oracle Developer Suite 10g - Windows 7 - swap space problem

Hi brothers and sisters,
Hope all you are fine. I am facing swap space problem while installing Oracle Developer Suite 10g on Windows 7 . I have downloaded and installed Oracle Database 11g Express Edition successfully and it is working properly. Now, I have downloaded two files
a. ds_windows_x86_101202_disk1,
b. ds_windows_x86_101202_disk2
to install Oracle Developer Suite 10g using Windows 7 Ultimate. The Oracle Universal Installer have passed the following issues:
a. Operating system version,
b. Monitor
But while checking swap space, it gives a message, "0 MB available, 1535 MB required", Failed. I have 2 GB RAM installed and system managed paging file space which is currently allocated to 2038 MB in my system .
Please solve me the problem.
Noor

increase the system virtual memory for the OS drive.
check this link
http://hamid-oracle.blogspot.com/2011/06/how-to-install-oracle-developer-suite.html
also check this link.
Re: error installing oracle forms 11g release 2
Hope this helps
If someone response is correct or helpful, mark accordingly. and if answered mark answered.
Edited by: HamidHelal on Jun 27, 2012 2:28 PM

Similar Messages

  • How to connect Oracle Form Builder - Oracle Developer Suite 10g - Windows 7

    Hi brothers and sisters,
    Hope all you are fine. I have installed Oracle Developer Suite 10g on Windows 7 successfully and it is working properly. But when I connect to Oracle Form Builder using Connect window asking:
    a. User Name
    b. Password
    c. Database
    a message box appear: 'ORA-12154: TNS:could not resolve the connect identifier specified'
    I verify my Connect String with: 'SELECT * FROM v$database', but the problem remain the same.
    Please help me how can I connect to Oracle Form Builder.
    Noor

    hi
    plz use Net Configuration Assistant or set tnsnames.ora with connect string and computer name.
    Net Configuration Assistant.
    when its opened then go to .
    *Local Net Service Name Configuration.
    *Click Next.
    *Add.
    *Click Next.
    * Service Name--Type here connect String which is XE or any Connect String.
    *TCP.
    *Click Next.
    *Host Name--Enter here Computer name or Ip address.
    *Yes,Perform a test.
    you can enter correct password and username here.
    Note:- your Database should be Up if its not Up it will through the same error so plz startup your database first.
    sarah

  • Problems installing Oracle Developer Suite 10g in windows 7

    Hi Experts;
    I have installed Oracle Developer Suite 10g in windows XP, but now I change to windows 7, 64 bits, I was trying to install this product and I'm having a lot of problems, apparently this product is not compatible with windows 7.
    My question is, is there any product, like Oracle Developer Suite 10g for windows 7? I was looking for in the Oracle page, and  I couldn't see anything, may be the name is diferent.
    Thanks for your help.
    Al

    First off, Oracle Developer Suite (ODS) 10g is no longer supported so Oracle has discontinued improving the product.  While ODS is not certified by Oracle for use on Windows 7 (32 or 64 bit), you can install and use on Windows 7 (32/64 bit).  This is a commonly asked question so a search of the forum would have given you several solutions.
    The limitations of the Oracle installer are:
    1.  You must have Administrator rights to install.
    2.  Windows 7 is not a supported version (it's version 6 and it is looking for version 5), so the installer exits.
    3.  It's unable to recognize Windows Managed virtual memory.
    To get around these limitations you must do the following:
    1.  Modify your Virtual Memory settings and define a specific Min and Max amount.   Look at this MS article if you need help making this change: http://windows.microsoft.com/en-us/windows7/change-the-size-of-virtual-memory
    2.  You must run the Oracle installer in compatibility mode for Windows XP.  To do this,
      - Right-click on the setup.exe and select the Compatibility tab and click "Run this program in compatibility mode for: Windows XP SP2"
    3.  While still in the properties and the compatibility tab, select the option, "Run as Administrator" and click OK.
    Now run the Oracle setup.exe and your installation should succeed.
    Craig...

  • How to install Oracle Developer Suite 10g on Windows 7 (64-bit)

    Hi,
    I have windows 7 (64-bit) installed on my laptop. I want to install Oracle developer suite 10g R2 on this machine but when I run the Oracle Universal Installer, it gives me error stating "operating system version: must be 5.0, 5.1, 5.2. Actual 6.1 Failed<<<<
    Exiting OUI.
    Can anyone please help me to solve this problem.
    Thanks in advance.
    Regards

    Be aware that Developer Suite 10gR2 is not supported for use on Windows 7. Installing it on this platform may result in undesirable behavior.

  • Installation of an Oracle Developer Suite 10g on Windows XP doesnt work

    Hello.
    I try to instal Oracle Developer Suite 10g on Windows XP. I run setup.exe from DISK1 directory. Universal installer starts and Welcome screen appears. I click "Next" to "Specify file locations" screen. But when I choose Source Path and Destination Name and Path and I click "Next" again, nothing happens. In installation log I can see strange error message. You can see it in part of log bellow:
    *** Welcome Page***
    Initializing install inventory
    Setting up install inventory
    *** Specify File Locations Page***
    Setting the 'SourceLocation ( FROM_LOCATION )' property to 'C:\xxx\OracleDevSuit\Disk1\stage\products.jar'. Received the value from the UI page.
    Setting the 'OracleHome ( ORACLE_HOME )' property to 'C:\Program Files\oracle\10.2.0\client_1'. Received the value from the UI page.
    Setting the 'OracleHomeName ( ORACLE_HOME_NAME )' property to 'OraClient10g_home1'. Received the value from the UI page.
    Initializing OUI access setup
    Setting variable 'ORACLE_HOME' to 'C:\Program Files\oracle\10.2.0\client_1'. Received the value from the UI page.
    Error:*** Alert: null ***
    User Selected: Cancel
    Can anybody help me? I am very confused about this error message.
    Thanks very much.
    Petr.

    Are you logged in as an administrator?
    I wouldn't install in Program Files anyway. I'm not sure, but I have a gut feeling that Oracle doesn't like spaces in file and directory names. Install in C:\Oracle directory.

  • Want to install Oracle Developer Suite 10g R2 on Windows 7 (64-bit)

    Hi,
    I have windows 7 (64-bit) installed on my laptop. I want to install Oracle developer suite 10g R2 on this machine but when I run the Oracle Universal Installer, it gives me error stating "operating system version: must be 5.0, 5.1, 5.2. Actual 6.1 Failed<<<<
    Exiting OUI.
    Can anyone please help me to solve this problem.
    Thanks in advance.
    Regards

    Developer Suite 10 is not certified or supported to be installed on Win7 (64bit). Although it can be done, you will have problems later if you manage to get it installed. If you really want to have it on your Win7 laptop, I encourage you to install "Windows XP Mode", which is part of Windows Virtual PC. This is free to licensed Win7 users (does not apply to Home edition). Refer to the following:
    http://windows.microsoft.com/en-US/windows7/install-and-use-windows-xp-mode-in-windows-7

  • Unable to install Oracle Developer Suite 10g on Windows 7

    Hello,
    I'm getting the following error message when using OUI on the Specify File Locations screen after providing source and destination:
    Invalid staging area. There are no top level components for Windows NT, Windows 2000 available for installation in this staging area.
    Anyone else have this happen while trying to install? I see that a few people have been successful in getting it installed. The destination was provided by default as C:\Program Files\Oracle\Inventory.
    Any help would be appreciated - thanks in advance.

    The Oracle Developer Suite (ODS) 10g is now certified by Oracle for installation on Windows 7 (32-bit). For installation steps, I recommend you take a look at My Oracle Support article: *How to Install Oracle Developer Suite 10g (10.1.2) on Windows 7 (32-bit) [ID 1292919.1]*. There is no need to run the XP-Mode (Virtual PC) of Windows 7 in order to install and use ODS on Windows 7.
    Invalid staging area. There are no top level components for Windows NT, Windows 2000 available for installation in this staging area.This error could be caused by many things. I've seen two. The first (as I recall) was caused by an issue with one of the files in the Inventory directory. We were able to get around the issue by deleting a file (I'm sorry, but I don't recall which file or if we simply deleted the directory). I recommend you check with Oracle Support before you delete any files or the directory, however.
    The other issue I've seen cause this is "spaces" in the directory path to the installer. This was the most common cause that I've seen. Make sure there are no spaces in the directory path where the installer is located.
    Hope this helps,
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.

  • Download Oracle Developer Suite 10g (10.1.2.0.2) for Microsoft Windows

    Hi
    I unable to download Oracle Developer Suite 10g (10.1.2.0.2) for Microsoft Windows from the OTN website. The download starts from here: http://www.oracle.com/technology/software/products/ids/htdocs/101202winsoft.html
    There are two files. The second file; ds_windows_x86_101202_disk2.zip downloads fine. The first file; ds_windows_x86_101202_disk1.zip stops at 46Mb with the message "connection reset by server".
    When downloading using getright as suggested on the FAQ the connection has to resume at 46Mb. Using segmented downloading in getright I have been able to download 636.92MB of the 640MB file. The getright download window shows connected; waiting for reply but I am unable to get the last few Meg.
    Any ideas how to complete the download? Has anyone else completed it successfully?
    Thanks
    Tom

    I guess, it is a problem with your network.
    Yesterday I have downloaded both the files and installed successfully. The first file took around 20 minutes and secod file took nearly 10 minutes to download.
    Are you using office network? You can try downloading at home with DSL.

  • Oracle Developer Suite 10g (10.1.2.0.2) windows ver

    hello friends i have problem in installation of oracle developer suit10g. I have downloaded windows ver of it from oracle site it came in 2 parts. i want to know weather i can install that ver to run a standalone database..
    when i have installed that ver of oracle on windows xp it data base is not connection it says tns protocol adapter error... can some one tell me does oracle developer suit 10g needs some data base also to be installed to run forms and reports like oracle 10g express database..etc...
    hello friends i also need complete installaion guide for that..please mail me if possible... [email protected]

    I believe they need to be in separate folders.
    I extracted them into separate folders, then ran setup.exe from disk 1. It will ask you for the location of disk 2, enter that path and away it went.

  • Is it possible to install oracle developer suite 10g in windows 7(64 bit), I have tried to install but failed so. Though, database 11g gets install in Windows 7.  If possible, Kindly provide me the website link.

    Is it possible to install oracle developer suite 10g in windows 7(64 bit), I have tried to install but failed so. Though, database 11g gets install in Windows 7.
    If possible, Kindly provide me the website link.

    Pl do not post duplicates
    Is 1GB ram is enough for the installation of oracle developer suite 10g and database 11g??? And which one to install fi…
    I want to install oracle database 11g and oracle developer suite 10g (latest) in my system. As i'm quite new to oracle ,…
    Continue the discussions in your original threads

  • Oracle Developer Suite 10g on Windows 7

    Hi. Does anyone know if running Oracle Developer Suite 10g (10.1.2.0.2) on Windows 7 is supported?

    This is a very common question in the Forum. Oracle Developer Suite (ODS) 10g R2 (with patchset 3: 10.1.3.0.2) is supported on Windows 7 32-bit. Last I checked, it was not supported on Windows 7 64-bit. Keep in mind, that this is just for the developer install of ODS. Version 10.1.2.0.2 is not supported, but it will work. Just follow the instructions installing on Windows Vista (search the forum - there are many posts on this topic as well).
    The client application is supported on all versions of Windows (32 or 64 bit).
    Hope this helps,
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.

  • Installation of Oracle Developer suite 10g on windows 8

    Can any one Please confirm, if Oracle Developer suite 10g is supported on windows 8 or not? Any types of Documents/materiel in this regard shall be highly appriciable.
    Regards,
    Nahidullah Khan

    It is an unsupported/uncertified combination - so the install may or may not work as expected. If the install completes, there no guarantee that the software will work as expected. Supported/certified OS versions are listed on the Install Guide. Is there a reason you are using this combination ?

  • Extract  Oracle Developer Suite 10g (10.1.2.0.2)  for Microsoft Windows

    Dear Oracle Support
    I have down load Oracle Developer Suite 10g (10.1.2.0.2)
    for Microsoft Windows
    this tow files name as the following
    ds_windows_x86_101202_disk1 , ds_windows_x86_101202_disk2 from this site of oracle
    http://www.oracle.com/technetwork/developer-tools/developer-suite/downloads/101202winsoft-087370.html
    when I try to extract the file I am getting the following message :
    D:\Documents and Settings\JAMIL.SUPER_V2\Desktop\desk1\ds_windows_x86_101202_disk1.zip: Either multipart or corrupt ZIP archive
    Waiting for your valuable answer .
    Best regards
    Jamil Alshaibani

    Dear Friends
    I have Downloaded it tow times but I am getting the same message , and how can I use a download manager while downloading the zip files , and I want to give here some more information the zip files size as the following : ds_windows_x86_101202_disk1 size = 232,661 KB is the size ok. ds_windows_x86_101202_disk2 size = 231,329 KB is the size ok.
    Waiting for your valuable answer .
    Best regards
    Jamil Alshaibani

  • ICON in Oracle Developer Suite 10g Problem

    Hi,
    I have installed Oracle Developer Suite [32 Bit] Version 10.1.2.0.2 (Production) on my note book.I am able to compile forms which are developed in FORMS 6i
    but not able to show the icons ...
    The following Steps i have followed:
    1.Oracle Developer Suite Installed
    2.FORMS_PATH ,REPORTS_PATH and UI_ICON has been set in both Registry and default.env
    My Application Folder setup is as follows :
         D:\iAFRES\APPLICATION\FORMS
                                           \MENUS
                                           \REPORTS
                                           \ICONS
       The registry variable values are as follows:
             FORMS_PATH=C:\DevSuiteHome\cgenf61\admin;C:\DevSuiteHome\forms;D:\iAFRES\APPLICATION\FORMS;D:\iAFRES\APPLICATION\LIB
             REPORTS_PATH=C:\DevSuiteHome\cgenf61\admin;C:\DevSuiteHome\forms;D:\iAFRES\APPLICATION\REPORTS;D:\iAFRES\APPLICATION\LIB
             UI_ICON=C:\DevSuiteHome\reports\plugins\resource;D:\iAFRES\APPLICATION\ICONS
      All the icons i have converted to gif format since ORACLE DEVELOPER SUITE 10g does not support ico files. Path for the same has been set in registry.dat like
        D:\iAFRES\APPLICATION\ICONS
      After doing all the above activities i am not able to show the icons ..Please tell me what to do to resolve the issue and provide me the steps for Application Deployment in Oracle 10g Developer Suite for Development purpose
    Thanks
    Dhabas

    here
    Displaying ICONS in forms(Linux)
    or create jar.
    How to create jar for icons
    sarah

  • Problem with Oracle Developer Suite 10g

    Hi,
    I have installed Oracle Developer Suite 10g. When I try to open the rdf file with the report builder, the error message "REP-0756: Warning: Unable to find PL/SQL library 'SHARE_RP'" shown.
    Does anyone know how to resolve this? Thanks!

    Try this thread: REP-0756: Warning: Unable to find PL/SQL library 'FARSV' and 'fadolif'

Maybe you are looking for