Oracle Diagnostics not allowing to enter parameter

While running Oracle diagnostics through Front End in R12 user is not able to give the parameters for WorkPlan...and getting the below error...
Invalid (tests) selected. Please change to developer mode to get more details
Anyone have any idea why its not allowing to enter the parameter and also getting the above error

hi, was wondering if you ever resolved you issue where you're getting an error message of "Invalid test(s) selected. Please change to developer mode to get more details." We just upgraded to 12.1.3 and are experiencing the same problem.
Thanks,
Julie K.

Similar Messages

  • ADOBE Interactive Form in webdynpro not allowing to enter value

    Hi,
         I have developed a Adobe interactive  form in SFP and then i developed webdynpro component , then integrated into webdynpro. while running the webdynpro application which is showing the adobeform but the input fields are not allowed to enter value.
    The same adobe form can be allowed to enter values while running from the report. i dunno how to set the value of the importing parameter fillable = 'X' in webdynpro.
    regards,
    Roops

    Hi friends,
        The above mentioned setting are all active like Zc...Layout, enabled check box etc.. but when i make it to Activex which is not displaying form in the portal while running the application instead it shows red color X mark.. is there any setting required to run adobe with webdynpro ..
    1.) any notes or patches ???
    2.) is activex mandatory for running interactive form in webdunpro? if yes what are system setting required....
    Regards,
    Roops.

  • You are not allowed to enter a tax jurisdiction code for country US

    Hi All,
    We are having this message popping up "You are not allowed to enter a tax jurisdiction code for country US" when we try to add an item to a shopping cart. SRM 4.0 Classic scenario.
    Also when i process the shopping cart and create a PO out of it, our R/3 4.6C dosnot let me release the PO and error message is :"no tax jurisdiction code found"
    I have looked at some of the earlier threads but i could not find a definite solution. Has anybody faced similar problems? Please let me know !
    Thanks
    Sundeep

    Hi Sudeep,
    How did it work? Do you have to implement any BADI's or SRM or R/3 side? As we are getting same error while creating Shopping Cart in SRM.
    I have checked the plant data in R/3 and Jurisdiction code has been maintained there.
    Please advise
    Thank you
    Ritesh

  • Not allowing to enter PO price with 3 decimals

    Hi,
    This is reg an issue, when i try to create PO and enter PO price with 3 decimals, its not allowing to enter value as for eg .231 whereas it allows .23.
    Can any one explain why its not allowing to enter  3 decimal values.
    Wheather this can be changed in configuration, if not what could be the corrective measure.
    Regards
    vasanth

    Dear vasanth,
    Please check OY04. However the customizing here normally will be defined at very
    first you the company use the system. Frequently changes or subsequently change
    might affect the already purchase document in the system and this will create system
    inconsistency.
    Therefore, if you want to do this, if have to study it carefully and make sure it not affect
    the existing purchase document or else you will be in inconsistency.
    I will advice you to make a thorough test in sandbox to see if suit you and study all the
    impact. If ot was ok, then only goto prod.
    Best Regards,
    Ian Wong

  • Duplicate record should not allow to enter

    hi
    i have three columns
    sno Number;
    in time date;
    out time date;
    this is the multiple taulat layout :
    User enter at run time values like this :
    1 01:15 03:00
    1 01:15 03:00 Here second record User should not allow to enter same Sno for Same In time and End time
    Before entering the data the total no of records : 0
    can u give me any suggestion.
    how to validate the columns.

    If you have a Unique Constraint on the table for these there columns it will prevent duplicate records.
    1 01:15 03:00 Here second record User should not allow to enter same Sno for Same In time and End timeBy "Second User" do you mean a user in a seperate Forms Session? If so, there is no way to check if the user in session 2 is entering a duplicate of a record entered by a user is session 1 accept through the use of a unique constraint on the table.
    There are methods available for checking for duplicates in the same Forms Session. Check out: Avoid duplicates in the same block and Forms: Record Group Processing (Duplicate Value Checking) for more information.
    Hope this helps,
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.

  • Can someone please help? my address bar is missing. All i have in its place is a grayed out tab that will not allow me enter a URL.

    can someone please help? my address bar is missing. All i have in its place is a grayed out tab that will not allow me enter a URL.

    What browser?
    Is this a Mac Pro?

  • System does not allow to enter data into cube

    Hello
    I use BPS NW2004s. I created a layout and execute "enter plan data". I realized that system does not allow me to enter data. Why?
    Alex

    I guess your cube is not transactional. Try to switch it to transactional

  • When making vendor down payment, not allowing to enter bank charges

    Hi!
    When making down payment to vendor, need to be entered bank charges. But system is not allowing for the same.
    Regards,
    Mouryan

    Hi,
    check in FBKP whether bank charges gl assigned or not, if not, assign it.
    Otherwise you can post charges by debiting to the concerned GL.
    Regards,
    Dharani

  • Appraisal template is not allowing to enter values in 25 infotype

    Dear consultants,
       I have created an appraisal status and released it .and its showing in 25 infotype .
    when i click the execute button it should allow me to enter the ratings but its not happening when i execute
    all fields are grayed out and i cant enter any ratings there.in status flow tab of template i have checked In preperation,in process and comleted statuses.
    please help me out.
    Edited by: Raj on Jul 31, 2009 11:57 AM

    Please check whether you have kept the entry open in the template.
    In the criterion where you define the columns and the scales there is a column called as value. check the value there. IF it is no entry then all the rating fields normally are greyed out. Change it to either optional or mandatory according to the requirement.
    Hope this helps.
    Regards,
    Naren.

  • Why Oracle does not allow rollback of  DDL statements?

    I have always been surprised why Oracle does a implicit commit when DDL statements (e.g create table …) are executed. DDL statements simply write information (insert, delete and update) to data dictionary, so why DDL statement cannot be rolled back. Am I missing some thing?
    I was learning SQL Server few months ago and I noticed that SQL Server does allow rollback of DDL statements if I am not mistaken. It lloks like there is something in Oracle architecture which prevents rollback of DDL satements. Rollback of all staements should be allowed not just of DML statements.
    Appercaite your insight.

    If you drop a 500 million row table (and let's assume you're not using the Recycle Bin, which is a different matter entirely), how do you propose to re-insert all 500 million rows if you were to be allowed to rollback the drop command? Same thing goes for a truncate command.
    I'm not saying there aren't workarounds (the Recycle Bin is precisely one of those), but it's certainly problematic. You could very well reverse the transaction ('delete from TAB$...') quite easily... but reversing the other consequences of that transaction is a lot more awkward. Therefore, it is certainly logical to declare such transactions irreversible and thus to imply a commit, both before and after.
    Or take it from another philosophical angle: a transaction that doesn't commit (or rollback) takes exclusive row-level locks that are held indefinitely and which will prevent other people from doing DML on the same rows, yes? Well, how do you fancy having an 'alter table' statement sitting around, uncommitted, in the data dictionary? Some process (or your users) are wanting to insert rows into this table, but the uncommitted alter command means that they can't acquire the shared table lock they need in order to be able to do so. One uncommitted DDL can seriously gum up the works, in short.
    Dictionary tables are not like ordinary user tables, because whilst what I do in INVOICES very likely has no impact on what you do in SALARIES, what I propose to do in TAB$ very definitely impacts what you might need to do in TAB$. Under those circumstances, it's a jolly good thing that Data Dictionary DDL doesn't leave a trail of uncommitted transactions hanging around! And the mechanism to achieve that 'good thing' (i.e., auto-committing) means such transactions must be immediately irreversible.
    Fair enough if other databases have chosen to handle things differently: their prerogative, of course. My point is simply that there is logic in NOT being able to roll back DDL statements, too, and it's a legitimate choice to have made to handle things in this way, too.

  • Transaction Code FB00 is not allowing asking  enter valid value

    Hi Team,
    when we are trying to access transaction code FB00 system is giving error message
    " Enter Valid value"
    Can any one suggest me what was the problem
    thanks
    Ranamka

    Hi K R
    HI
    I  have verified in FB00,
    when i trying to access FB00 system gives error messge (with pop up ) "enter a valid value", in the pop up there is options "OK" and "Help"
    step1: when I click on  "help"  system shows below mentioned message
    Enter a valid value
    Message number :00002
    Procedure
    Display the allowed values with F4 and correct your entry.
    step 2:  as per the above message user was execute F4 button
    then system give show one Pop up Box with below content
    Message Data
    Appl.Area 00
    messge Number :0002
    when user click on F4 button he gets below option
    he gets another Pop up box
    Classic  display
    short discrption
    X                          yes
                                No
    This problem gets only user  we are not getting this error when we access FB00
    Can any guide me where is the Problem
    thanks
    Ranamka

  • Not allowing to enter Change-Order Screen

    The moment the order no. is typed in IW32 and you enter it, system throws the error message;
    Inconsistent data: Order 5000000363 29.12.2002, duplicate entry O 0090
    It gives the following error;
    Diagnosis
    Processing had to be canceled due to inconsistent master data or order data. The system found duplicate entries for object O 0090 (abbreviation meaning, see below).
    System Response
    Processing for this order was canceled.
    Procedure
    For inconsistent order data, the order number is given. For inconsistent routings, the plan number is given.
    Inconsistent order data
    The order number and master data explosion date is given. Examine the order in the order information system in the object overview, and display all objects. You might be able to see the duplicate objects here. Try and find out the origins of the duplicate entries, then contact SAP to resolve the inconsistency.
    <b>Can anybody help me in resolving this?</b>

    Check for notes first on service.sap.com
    Probably some note will need to be applied. Try to involve the BASIS consultant in case u don't find the right/suitable note. An inconsistency in the data has occured because of which there is that error.
    Pls don't forget awarding points for my replies including the earlier ones.
    thanks
    Bala

  • Null values not allowed in object-parameter for esb proxy invocation

    When I create a proxy service for my esb webservice and try to invoke this service from my ADF Application I was always getting the exception 'unexpected null value for literal data'.
    I've figured out what went wrong through debugging the proxy-classes of the esb-service.
    You need to define an input-value for each attribute of which your object is constituted. After I've initialized each variable in the object, which is the input-parameter of my esb proxy, everything works fine.

    When I create a proxy service for my esb webservice and try to invoke this service from my ADF Application I was always getting the exception 'unexpected null value for literal data'.
    I've figured out what went wrong through debugging the proxy-classes of the esb-service.
    You need to define an input-value for each attribute of which your object is constituted. After I've initialized each variable in the object, which is the input-parameter of my esb proxy, everything works fine.

  • 0Material Not allowing to enter Specified Length

    Hi,
    The  infoobject  0spm_mtnl1 has a reference of 0Material. This 0Material has a length of 18 But when we are trying to Maintain the Master Data of 0material  its just allowing 1 Character only .Can u Please suggest.

    goto transaction OMSL and maintain length as 18. The same transaction would have 18 in ECC as well.

  • How to raise an error message when duplicate value is entered in a tabular field column? Basically not allow duplicate value at the form level.

    Hi all,
    I have created a form with one data block MATURED_FD_DTL which looks like below:
    ACCT_FD_NO
    CUST_CODE
    FD_AMT
    FD_INT_BAL
    TDS
    CHQ_NO
    ADD_FD_AMT
    P_SAP_CODE
    P_TYPE
    CREATE TABLE MATURED_FD_DTL
      ACCT_FD_NO    VARCHAR2(17 BYTE)               NOT NULL,
      CUST_CODE     NUMBER(9),
      FD_AMT        NUMBER(15),
      FD_INT_BAL    NUMBER(15),
      TDS           NUMBER(15),
      CHQ_NO        NUMBER(10),
      ADD_FD_AMT    NUMBER(15),
      P_SAP_CODE    NUMBER(10),
      P_TYPE        VARCHAR2(1 BYTE)
    For MATURED_FD_DT.ACCT_FD_NO, Trigger: KEY_NEXT_ITEM, I have written the following code:
    DECLARE
    V1 NUMBER;
    V2 NUMBER;
    BEGIN
    V1:=:MATURED_FD_DTL.ACCT_FD_NO;
    MESSAGE('V1:'||V1);
    MESSAGE(' ');
    END;
         GO_ITEM('MATURED_FD_DTL.CUST_CODE');
    This is just a dummy code.
    When ever i enter the value in the field of ACCT_FD_NO, it pops up a message saying "V1:Value of ACCT_FD_NO",
    So i want to store that value .
    Compare them & if it is egual, it should pop up a message saying duplicate value is entered and must not allow to enter, at form_level.
    So how can I compare the ACCT_FD_NO value between FIRST_RECORD and NEXT_RECORD ??
    Help Me .
    Thank You.
    Oracle Forms 6i.
    Oracle 9i.

    Thank You HamidHelal.
    Actually before posting the code, I went through the first link you have mentioned. I tried also, it is quite tedious procedure, however i dint get the proper result, may be i have done some mistake. Anyways , can you tell me how do i check in database table, if a value exists OR IF VALUE FOUND & then message and raise form trigger failure; something like below.
    IF :MATURED_FD_DTL.ACCT_FD_NO EXISTS
    THEN MESSAGE('YOU HAVE ENTERED AN EXISTING OR DUPLICATE VALUE');
              MESSAGE(' ');
    RAISE FORM_TRIGGER_FAILURE;
    END;
    OR
    IF :MATURED_FD_DTL.ACCT_FD_NO FOUND
    THEN MESSAGE('YOU HAVE ENTERED AN EXISTING OR DUPLICATE VALUE');
              MESSAGE(' ');
    RAISE FORM_TRIGGER_FAILURE;
    END;
    Is there any equivalent in the form in oracle forms 6i?? Please let me know how do i do this??

Maybe you are looking for