Oracle Discoverer with Apps 11.5.10 : Apps server side settings???

Hi All!
We have Oracle Apps 11.5.10 set up on our Apps server. The Discoverer Services status is 'started'.
Can someone tell me what settings are required to be done on Apps server in order to create an EUL or to use the Apps BI reports?
Is there any note or document that can be useful?
Thanks and regards,
Aparna

Hi Aparna
If you haven't seen that note or followed its steps yet, take a deep breath because its quite involved. From scratch it will probably take at least a day to go through it. Also, please make sure you follow every step and don't try to jump ahead. Many of the one-liners are very important and if missed will make it not work right.
The good thing though is that 100s of companies have gone through the same document so you can be reassured that it does work.
If you've not installed Discoverer in Apps mode yet and you'd like some screenshots of how Apps mode is set up in Discoverer, I have a white paper on my website that walks you through at least that part. Here's a link: http://learndiscoverer.com/downloads/downloads.htm
Best wishes
Michael

Similar Messages

Oracle discoverer with oracle AS

Is it oracle discoverer for web version must be install with oracle AS?

Hard to answer a question like this without a lot of details like your version etc. In later versions of Discoverer there is a checkdiscoverer utility that helps resolve these types of issues. There are also version specific trouble shooting guides available thru Top Tech Docs / Knowledge Browser on Metalink.
If you can't resolve using the diagnostic doc, please log an SR / TAR with Support.
Discoverer Product Management - mpd

How to configure Oracle Discoverer with EBS R12 ?

Dear
I hope, by default Oracle Discoverer is not configured with EBS R 12. How to configure it?
Any hlep, highly appreciated.

Ateeq,
Please refer to the following note, it should be helpful:
Note: 373634.1 - Using Discoverer 10.1.2 with Oracle E-Business Suite Release 12
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=373634.1

Use Oracle discoverer with VB6

Hi,
I want to run oracle discoverer reports using VB6.
Is this possible?
Any help would be highly appreciated.
Thanks and Regards,

Dear All,
Can we call Oracle Reports from ASP.Net applications. If so is it recommended?
Thanks and Regards,
Ullas

Can oracle discoverer 10 be installed on Windows 2003 server

Hi,
I have couple of queries related to Oracle Discoverer. Need help urgently.
1. Can Oracle Discoverer 4.1 version support Windows 2003 on which Citrix server version 4 or above is installed? If yes, please let me know the patch details to download the same.
2. Can Oracle 10g BI Tool, Oracle Discoverer Administrator and Desktop be installed on Windows 2003 Server Operating System on which Citrix server version 4 or above be installed?
Thanks in advance.
Regards,
Rajesh Gurram

Hi,
1. Discoverer 4.1 has been desupported but was only certified for Windows 200 and XP
2. Discoverer Desktop and Admin is support on Windows 2003:
2003 SP1+ 10g (10.1.2.0.2 )
One thing I have to mentioned is that Oracle does not support any Citrix client operations.
If ever you encounter a problem you will need to reproduce the problem
outside of the Citrix environment to prove that it is not the cause of the problem.
Regards
Roelie Viviers

PROBLEM connect oracle 9i with JBOSS 3.2.3 application server

i want to connect my web app to oracle9i by jboss3.2.3 .
The database is on server machine in my domain and the application is on my local machine.
Please help me is urgent
Thanks

To configure JBoss with Oracle dataabse.
1. Copy Oracle's JDBC driver .zip file /jdbc/lib/classes12.zip to the server/default/lib directory.
2. Copy /docs/examples/jca/oracle-ds.xml , to /server/default/deploy dir.
3. In the oracle-ds.xml file set the <driver-class/> and <connection-url/> settings
Class: oracle.jdbc.driver.OracleDriver
URL: jdbc:oracle:thin:@<host>:<port>:<database>
In the Connection URL setting, <host> is the HOST value specified in the /network/ADMIN/tnsnames.ora file, and <port> is the PORT value specified in the tnsnames.ora file, and <database> is the database name.
4.
Modify the standardjbosscmp-jdbc.xml configuration file, setting the <datasource> and <datasource-mapping> elements to use Oracle:
<jbosscmp-jdbc>
<defaults>
<datasource>java:/OracleDS</datasource>
<datasource-mapping>Oracle9i</datasource-mapping>
</defaults>
</jbosscmp-jdbc>
5.
Modify login-config.xml to use Oracle. Add the following <application-policy> element to login-config.xml:
<application-policy name = "OracleDbRealm">
<authentication>
<login-module code =
"org.jboss.resource.security.ConfiguredIdentityLoginModule"
flag = "required">
<module-option name = "principal">sa</module-option>
<module-option name = "userName">sa</module-option>
<module-option name = "password"></module-option>
<module-option name ="managedConnectionFactoryName">
jboss.jca:service=LocalTxCM,name=OracleDS
</module-option>
</login-module>
</authentication>
</application-policy>
5.

Deploying Oracle Forms with Plss and dlls in Client/Server

Hi,
I have a form application which has two plls libraries attached to it - d2kwutil.pll and d2kcomn.pll and one dll - d2kwutil.dll. All these libraries are necssary for the app to work. The issue come when I am trying to deploy them in different environments like dev,test,qa,prod. The users access the forms applications from a shared drive and all the users have forms runtime client installed on their local machines.
If I just post my fmx in the shared drive it doesn't work as its unable to find the plls and the dll. I will really appreciate if someone can provide some feedback on this. How this should be done so that we can place these plls and dll in central location without chaning the paths etc.
Thanks

Oracle Application Server Release 3 can not be used to deploy forms and reports.
If you want forms and reports you need to stay on Oracle Application Server 10g Release 2

Which is the best version of Discoverer with Oracle 9iAS ?

I have been told to find the best version of Oracle Discoverer for ORacle 9iAS - for
the ORacle Financials and HR (E-Business suite ) ?
Can anyone direct me to the manual where it explains the integration of
ORacle Discoverer with E-Business suite ?

Hi
You can only use Discoverer 9.0.2 with Application Server 9iAS. This is because Discoverer 9.0.2 is an integral part of that server. However, Discoverer 9.0.2 was never certified against Oracle Applications so you cannot use it to connect and run with 11i.
I would question why you are trying to do this because 9iAS is desupported as is the Discoverer version that goes with it. You should upgrade your AS to 10g 10.1.2 and take advantage of the latest version of Discoverer.
Please take a look at this posting on my blog: http://learndiscoverer.blogspot.com/2006/04/april-2006-oracle-discoverer-patch.html
which lists all the versions of Discoverer along with the correct patch levels and desupport dates.
The integration of Discoverer with E-Business Suite can be found in a number of documents on MetaLink:
313418.1 - discusses Discoverer 10g and 11i
233436.1 - discusses Application Server 10g and 11i
257798.1 - discussed Discoverer 9.0.4 and 11i
139516.1 - discusses Discoverer 4i and 11i
I hope this helps
Best wishes
Michael Armstrong-Smith
URL: http://learndiscoverer.com
Blog: http://learndiscoverer.blogspot.com

Installation of Oracle Discoverer for PeopleSoft and Oracle apps(11.5.10)

Hello Gurus,
I hope I am in the right forum. I have been assigned to install Oracle Discoverer for Oracle ERP (11.5.10). We currently have a Oracle Discoverer environment for Peoplesoft. My questions are follows.
1. Can I use the existing Oracle Discoverer which is used to get PeopleSoft data for Oracle Applications (11.5.10) ?? This way I avoid installing another copy of Discoverer. In Future, if we could use the existing technology for other Databases.
2. If I go in for a new install of Oracle Discoverer, what is that I need to install ? I am guessing, there should be
1. Desktop application on the client
2. Do I need to install anything on the server ?
3. I will have a Oracle Discoverer database
I guess 1. (Desktop application) would be installed on all desktops ? Is there a web based thingy ?? For 2 and 3 I would require the DBA's to help me out.
Would anyone have a high level diagram of the things that go in for installation ? I would really appreciate if you could send it to kiranramachandra at yahoo dot com.
Thanks folks
Kiran

Hi,
1. No, you don't need to reinstall Discoverer, you can just connect to the new database provided you have updated the TNSNames.ora file. However, before you can connect with Discoverer Desktop you will need to use Discoverer Admin to create a new Apps mode EUL in the Applications Database.
2. You will need a client installation of Discoverer (Admin and Desktop). If you want to use the web based Discoverer Plus and Viewer tools you will need to a Oracle Application Server installation. If you are installing Discoverer 10g then you should install the Oracle Business Intelligence Standard Edition. But depending on your version and configuration you may need to install other tools.
Rod West

Oracle Reports with graphics for Oracle App R11i 11.5.9 ??

Hii
Can i develop Oracle Reports with Graphics ( basic header,footer,logo ) and register it with Oracle Apps R11i 11.5.9 and be able to view it as an end user.
If yes then how ?
Regards
Fahad Hameed

Hii Guys
I've developed a report with a basic Header.BMP file and it runs fine on local.
How will it run on Oracle Apps is the question that i need to find answers to .
Regards
Fahad Hameed

Help with Oracle Discoverer

Hello.
First of all I'm sorry if there is already another thread on this matter.
I'm a newbie.
I just managed to install Oracle EBS 11.5.10.2 on a machine running on a RedHat Linux AS 3.0 (the installation was made without staging). I have two users: one for the database tier and one for the application tier. Everything went well (no errors).
I logged in to the Oracle Application Manager and I see that the Discoverer Web Component is up and running.
My question is: how do I check if Discoverer is running on my machine.
I also had some errors when running the $COMMON_TOP/admin/scripts/ISP_ispdevtst/adstrtal.sh script (./adstrtal.sh apps/apps):
Executing service control script:
/u01/oracle/ispcomn/admin/scripts/ISP_ispdevtst/addisctl.sh start
script returned:
addisctl.sh version 115.14
Oracle Discoverer OAD is not running (no process with PID 8928 )
Waiting for OAD to start...
Started OAD.
OAD logs messages to the file /u01/oracle/ispora/8.0.6/discwb4/util/oad.log.
Oracle Discoverer OSAGENT is not running (no process with PID 8910)
/u01/oracle/ispora/8.0.6/vbroker/bin/osagent
Started osagent.
Osagent logs messages to the file /u01/oracle/ispora/8.0.6/discwb4/util/osagent.log.
Oracle Discoverer LOCATOR is not running (no process with PID 8941 )
Failed to start locator.
Cannot bind to OAD. Re-starting...
OAD is stopped
Osagent is stopped
Unable to stop locator. No process-id file found.
Unable to stop gatekeeper. No process-id file found.
session id 13440 is not running
session id 13469 is not running
Discoverer Preference id 13457 is not running
Unable to stop any Discoverer Collector. No process-id file found.
/u01/oracle/ispora/8.0.6/vbroker/bin/osagent
Started osagent.
Osagent logs messages to the file /u01/oracle/ispora/8.0.6/discwb4/util/osagent.log.
Waiting for OAD to start...
Started OAD.
OAD logs messages to the file /u01/oracle/ispora/8.0.6/discwb4/util/oad.log.
Failed to start locator.
Registering Discoverer Session
Registering the Collector
Applying preferences from file : /u01/oracle/ispora/8.0.6/discwb4/util/pref.txt
Finished applying preferences
Registering Discoverer Preference Repository
addisctl.sh: exiting with status 1
.end std out.
/u01/oracle/ispora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
/u01/oracle/ispora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
/u01/oracle/ispora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
/u01/oracle/ispora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
/u01/oracle/ispora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
/u01/oracle/ispora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
Memory fault
/u01/oracle/ispora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
.end err out.
Check logfile /u01/oracle/ispcomn/admin/log/ISP_ispdevtst/04221540.log for details
Exiting with status 1
This is just the last part of the script, the other scripts exited with status 0.
Is this error of any concern ?
Thank you.
Sorin Miroiu

Hello,
I cannot address your E-Business Suite (EBS) script errors. However, the OAD and Locator are present in the Discoverer 4.1 release. This release is very old and currently under sustaining support only. The latest release is 10.1.2.3 and this is the recommended Discoverer release.
There are many Notes regarding using Discoverer with EBS. Here are the Notes regarding EBS 11i and Discoverer.
Note 139516.1 - Using Discoverer 4i with Oracle Applications 11i
Note 313418.1 - Using Discoverer 10.1.2 with Oracle E-Business Suite 11i
Note 1073963.1 - Using Discoverer 11.1.1 with Oracle E-Business Suite Release 11i
Regards,
Sharon

Oracle E-Business Suite 12.1.3 App Tier and DB Tier in US-West region

Hi,
We need to setup 12.1.3 Vision instance on Amazon EC2. When I am checking details on AMI (Amazon Machine Images) for Oracle E-Business Suite 12.1.3 App Tier and DB Tier, I see below
“This AMI is currently available for use in the US-East region and for the High-Memory instance family (m2.xlarge, m2.2xlarge, and m2.4xlarge)”
Does it mean we can’t use it for US-West region? I could not find any phone number to contact AWS sales person.
we need to setup instance this week for client's demo. Appreciate quick response.
Thanks,
Jigisha

Hello
See the logfiles adwork001.log to adwork004.log. The last lines show the errors ocurred. The best thing to do is to open an SR with Support sending those error messages.
Hope this helps.
Octavio.

When i go to sync my apps with my computer it tells me ''are you sure you want to sync apps ? all exsisting apps and there data on (iphone) will be replaced with the apps on this itunes library'' does this mean all my data will be lost if i continue ?

when i go to sync my apps with my computer it tells me ''are you sure you want to sync apps ? all exsisting apps and there data on (iphone) will be replaced with the apps on this itunes library'' does this mean all my data will be lost if i continue ?

Regarding your broken, previously authorized computer, here's how that works:
You would authorize your new computer -- maybe you've done that already. Then you will have two computers authorized. Apple allows you to have up to five computers authorized at any time. If you get to five, you can then go to your account details in iTunes and remove all authorizations.
Bear in mind this is not saying you can synch to more tham one library. Razmee209 and gdgmacguy's comments above are correct. But if Apple only allowed you to authorize one computer at a time, then having a broken computer would mean you could no longer use your Apple ID with iTunes.

I've updated my Macbook Pro and my iMac with Maverick, updating the various apps. On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory, and it's based our Mail, the only app not updated. Ideas?

Maverick and Your System message
I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
Any ideas?

Maverick and Your System message
I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
Any ideas?

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
I have been trying to install Photoshop CS6 & CC and Acrobat Pro XI on my Mac Pro (late 2013). I keep getting a 'configuration' error message and wondered if the problem was wide spread.
TIA,
Jerry

Thanks, Martin.
Good to hear someone has had success. The lack of it here is frustrating and depressing.
Thanks again,
Jerry

Oracle Discoverer with Apps 11.5.10 : Apps server side settings???

Similar Messages

Maybe you are looking for