Oracle distributed document capture OCR

there is no OCR in Oracle distributed document capture there is any solution fro this issue ??

Yes, the 11.1.1.8 version has Capture as a managed server and not as a windows based desktop app. So no seperate installer for the same.
Also, Looks like they'ave covered the ODDC use cases in the Capture itself, that being a web app now.
regards,
Pradeep Mahajan.
http://ucmchronicles.wordpress.com
http://ucmchronicles.wordpress.com/2013/08/20/whats-new-with-capture-in-the-11-1-1-8-version

Similar Messages

Oracle distributed document capture applet error [424]

this error appear on Oracle distributed document capture applet
There was a problem using xmlhttprequest to log out of Capture error [424]
any help / advice any help /or advice

reinstal oddc activex

Oracle distributed document capture service not started

Oracle distributed document capture service not started
and timeout

I did check the Distributed Document Capture Configuration (from the Start menu) and it also indicates that I have selected "Oracle Distributed Document Capture Prompted Login". Once I click "OK" after I supplied all the paths required by server settings, it also displays the error "The username and password could not be validated". What credentials should be entered in the User ID / Password / Domain fields? You should use the username and password entered while configuring the "capture" security model. Leave the domain field blank.
I have not yet configured the IIS at this point. Is it required for the Capture application to authenticate the user I specified during the installation configuration at login? IIS will serve web ODDC interface and will be needed for authentication while accessing ODDC web pages. I beleive that it is not needed for authentication from ODC/ODDC applets. However, when something is not working as expected, I would first finish all required installation and especially post installation setup steps.
I had a look at the IIS configuration in the installation document. It doesn't clearly state which document is the default document for the website one needs to create in IIS. Do you know what it should be? You have to add new web site, say like "Capture" and add virtual directory from assumed path like: C:\Program Files\Oracle\Document Capture\WebPages
For the default document I have WebCapture.asp.
The Oracle Distributed Document Capture service does no start on my PC. Is this required for me to atleast login to the Capture application? It's required only for processing the scanned batches.
I hope that this will help.
Boris
Edited by: tombo on 2012.03.16 06:32

Issue with Oracle Distributed Document Capture in table update

Hi All,
I installed ODDC and configured with Oracle 11gr2 for document commit.
I have table with 4 fields i.e id,c_number,content,mime_type. I am storing the image in content which blob datatype.
when i import and send document from WebCapture screen i am getting document send successfully. But the data is no commiting in database table.
The pak file are genereated in "/Document Capture/Webpages/ClientAcces".
how i have to commit this files to database?.
am I missing something in configuration?. Please suggest.
thanks
nr
Edited by: pnr on Jul 30, 2012 5:50 AM
Edited by: pnr on 30 Jul, 2012 7:54 AM

It's likely that Oracle Distributed Document Capture Service (ecNetService) haven't been started as it is responsible for the pak file processing and it doesn't start automatically after install.
Regards,
Boris
Edited by: tombo on 2012.08.01 04:49

Oracle Distributed Document Capture

Has anyone heard of any new release for ODC/ODDC 10gR3 to 11g (talked about back in 2008)? I noticed in the WebCenter qtr update they have no mention of the capture side of the house, only the end-user side. Thanks in advance

I think that is part of Webcenter Imaging now.
http://www.oracle.com/us/products/middleware/webcenter/content/imaging-process-mgmt/features/index.html

Distributed Document Capture and date fields

Greetings!
We are using Oracle Distributed Document Capture and Universal Content Management as repository, it works fine. However we defined a custom metadata field with data type "date" in UCM and we defined a scan profile with its asssociated date field and the problem that we have is when we are using the distributed document capture client and the user selects a date from the calendar and send the document, the commit process fails with the following error message :
The field 'xxx' does not contain a valid date.
However If the user types the date field as "29/01/2009 00:00" the commit process works fine and the document is stored on UCM.
My question is how to enable the calendar on the Distributed Document Capture client in order to enter a valid date with format "dd/m/yyyy hh:mm"
Thanks!

Thanks for your answer I set the property "Automatically assign a Content ID on check in" Should I specify the minor revision label and the major revision label?.
Because I set just the "Automatically assign a Content ID on check in" and now I got the following when I am scanning documents:
***Error*** Failed to process batch 01354425_01354446. Error Number: 40011, Error: Failed to commit batch (with delete). Commit Profile - ucm: Document file already exists. Commit is configured to abort. Document File: \\svrdocumentos_ejc_ejercito_mil_co\batch\00J\0000000D\0000000D_1.TIF
The good news is the previous error "Error Number: 40008" is solved
I really appreciate yor help.
Thanks.

Distributed Document Capture and UCM commit issue: 302 Moved Temporarily

I am installing and configuring Oracle Document Capture and Oracle Distributed Document Capture to commit documents to Oracle UCM.
I am unable to commit documents to UCM because of the following error: "302 Moved Temporarily". What can be wrong with my configuration?
Error log from the ODDC:
Wed Dec 15 10:20:14 CET 2010 INFO Document file name is D:\oracle\Document Capture\Batches\001\00000001\00000001_1.
Wed Dec 15 10:20:14 CET 2010 INFO Begin Check In Process.
Wed Dec 15 10:20:14 CET 2010 INFO Idc service = CHECKIN_UNIVERSAL.
Wed Dec 15 10:20:14 CET 2010 INFO Parsing xml to obtain fields data.
Wed Dec 15 10:20:14 CET 2010 INFO dDocTitle: oddc.
Wed Dec 15 10:20:14 CET 2010 INFO dDocType: Application.
Wed Dec 15 10:20:14 CET 2010 INFO Field DocAuthor: weblogic.
Wed Dec 15 10:20:14 CET 2010 INFO dSecurityGroup: Public.
Wed Dec 15 10:20:14 CET 2010 INFO dDocAuthor: weblogic.
Wed Dec 15 10:20:14 CET 2010 INFO dDocAccount: .
Wed Dec 15 10:20:14 CET 2010 INFO primaryFile: D:\oracle\Document Capture\Batches\001\00000001\00000001.1.
Wed Dec 15 10:20:15 CET 2010 SEVERE Failed to check in document. Exception: {0}. Error is: oracle.stellent.ridc.protocol.http.HttpProtocolException: HTTP/1.1 302 Moved Temporarily
     at oracle.stellent.ridc.protocol.http.IdcHttpProtocol.writeRequest(IdcHttpProtocol.java:171)
     at oracle.stellent.ridc.IdcClient.sendRequest(IdcClient.java:140)
     at com.oracle.capture.UCM11g.Driver.checkIn(Driver.java:192)
     at com.oracle.capture.UCM11g.ComDriver.checkIn(ComDriver.java:42)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.jniwrapper.win32.com.server.IDispatchServer.invoke(SourceFile:209)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.jniwrapper.win32.com.server.CoInterfaceVTBL$VirtualMethodCallback.b(SourceFile:232)
     at com.jniwrapper.win32.com.server.CoInterfaceVTBL$VirtualMethodCallback.callback(SourceFile:135)
     at com.jniwrapper.Callback.enterPoint(SourceFile:222)
     at com.jniwrapper.Function.invokeCFunc(Native Method)
     at com.jniwrapper.FunctionCall.a(SourceFile:126)
     at com.jniwrapper.FunctionCall.call(SourceFile:34)
     at com.jniwrapper.Function.invoke(SourceFile:188)
     at com.jniwrapper.Function.invoke(SourceFile:212)
     at com.jniwrapper.win32.MessageLoopThread$LoopThread.run(MessageLoopThread.java:489)
Error log from the WLS - UCM_server1:
####<2010-12-15 10:23:52 CET> <Info> <ServletContext-> <???> <UCM_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <8857620d73b0a621:-7e6d4fca:12ce951b643:-7ffd-0000000000000045> <1292405032703> <BEA-000000> <Failed access to redirected secure URL>
I am using Oracle Distributed Document Capture Release 10gR3 and Content Server 11g Release 1.
I configured the Oracle UCM 11g Commit Driver:
user: my_user, password: my_password, Server URL: http://localhost:16200/cs
When I am trying to commit a batch I am getting the following response:
HTTP/1.1 200 OK
Cache-Control: no-cache
Date: Wed, 15 Dec 2010 09:33:06 GMT
Content-Length: 664
Content-Type: text/plain; charset=utf-8
Set-Cookie: IDCCS_SESSIONID=yycVNLLSL1hJ3P2mQkQrjss7XLZY23r8vFbt2n4wTj7VJ2c9xQ01!-1355344816; path=/; HttpOnly
X-ORACLE-DMS-ECID: 0000IndO3b39_aW5Pzw0yd1D28UE00000t
X-Powered-By: Servlet/2.5 JSP/2.1
<?hda version="11gR1-11.1.1.3.0-idcprod1-100505T121221" jcharset=UTF8 encoding=utf-8?>
@Properties LocalData
IdcService=PING_SERVER
ClientEncoding=UTF8
UserTimeZone=UTC
UserDateFormat=iso8601
addAlert=1
ActAsAnonymous=1
dUser=anonymous
blDateFormat=yyyy-MM-dd HH:mm:ssZ!tUTC!mAM,PM
refreshSubjects=
refreshMonikers=
changedSubjects=
refreshSubMonikers=
blFieldTypes=StatusMessage message
RedirectUrl=/cs/
changedMonikers=
idcToken=
IsJava=1
@end
@ResultSet USER_ALERTS
3
alertId
alertMsg
alertUrl
csWeblayout8dot3Error
<$lcMessage('!csWeblayout8dot3Error')$>
@end
@ResultSet UserAttribInfo
2
dUserName
AttributeInfo
anonymous
account,#none,15,role,guest,15
@end
HTTP/1.1 302 Moved Temporarily
Date: Wed, 15 Dec 2010 09:33:06 GMT
Transfer-Encoding: chunked
Location: http://localhost:16200/cs/login/login.htm
X-ORACLE-DMS-ECID: 0000IndO3c19_aW5Pzw0yd1D28UE00000u
X-Powered-By: Servlet/2.5 JSP/2.1
0113
<html><head><title>302 Moved Temporarily</title></head>
<body bgcolor="#FFFFFF">
<p>This document you requested has moved temporarily.</p>
<p>It's now at http://localhost:16200/cs/login/login.htm.</p>
</body></html>
0000
The Request:
POST /cs HTTP/1.1
User-Agent: Java; Stellent CIS 11g
IdcVersion: 11.1.1
Host: 127.0.0.1:16200
Content-Length: 124
Content-Type: text/hda; charset=UTF-8
IsJava=1
<?hda jcharset=UTF-8?>
@Properties LocalData
IdcService=PING_SERVER
UserTimeZone=UTC
UserDateFormat=iso8601
@end
POST /cs HTTP/1.1
User-Agent: Java; Stellent CIS 11g
IdcVersion: 11.1.1
Authorization: Basic d2VibG9naWM6d2VibG9naWMx
Host: localhost:16200
Cookie: $Version=0; IDCCS_SESSIONID=Z2ZpNLQbKchmg2tVB5fpQLL2pPphT4BFX18GJPbkqkxMxLVMhbLZ!-1355344816; $Path=/
Content-Length: 28963
Content-Type: multipart/form-data; boundary=67xMPN-krvICaGSzKNTkd02u8MLyarA
--67xMPN-krvICaGSzKNTkd02u8MLyarA
Content-Disposition: form-data; name="IsJava"
Content-Type: text/plain; charset=US-ASCII
1
--67xMPN-krvICaGSzKNTkd02u8MLyarA
Content-Disposition: form-data; name="ClientEncoding"
Content-Type: text/plain; charset=US-ASCII
UTF-8
--67xMPN-krvICaGSzKNTkd02u8MLyarA
Content-Disposition: form-data; name="IdcService"
Content-Type: text/plain; charset=UTF-8
CHECKIN_UNIVERSAL
--67xMPN-krvICaGSzKNTkd02u8MLyarA
Content-Disposition: form-data; name="UserTimeZone"
Content-Type: text/plain; charset=UTF-8
UTC
--67xMPN-krvICaGSzKNTkd02u8MLyarA
Content-Disposition: form-data; name="UserDateFormat"
Content-Type: text/plain; charset=UTF-8
iso8601
--67xMPN-krvICaGSzKNTkd02u8MLyarA
Content-Disposition: form-data; name="dSecurityGroup"
Content-Type: text/plain; charset=UTF-8
Public
--67xMPN-krvICaGSzKNTkd02u8MLyarA
Content-Disposition: form-data; name="dDocAccount"
Content-Type: text/plain; charset=UTF-8
--67xMPN-krvICaGSzKNTkd02u8MLyarA
Content-Disposition: form-data; name="dDocAuthor"
Content-Type: text/plain; charset=UTF-8
weblogic
--67xMPN-krvICaGSzKNTkd02u8MLyarA
Content-Disposition: form-data; name="dDocType"
Content-Type: text/plain; charset=UTF-8
Application
--67xMPN-krvICaGSzKNTkd02u8MLyarA
Content-Disposition: form-data; name="dDocTitle"
Content-Type: text/plain; charset=UTF-8
oddc
--67xMPN-krvICaGSzKNTkd02u8MLyarA
Content-Disposition: form-data; name="DocAuthor"
Content-Type: text/plain; charset=UTF-8
weblogic
--67xMPN-krvICaGSzKNTkd02u8MLyarA
Content-Disposition: form-data; name="primaryFile"; filename="00000002.1"
Content-Type: application/octet-stream; charset=ISO-8859-1
˙Ř˙ŕ<file content....>

"302 Moved Temporarily" is a web server error (I googled it - see e.g. http://www.checkupdown.com/status/E302.html)
Two recommendations that you can try:
- do not use 'localhost' - use computer assigned name, or at worst IP address
- in my system, Server URL is set to http://ecm-base:16200/cs/idcplg (from ODC). Try to modify yours accordingly.

Oracle distributed doc capture - commiting

hi i'm currently researching on oracle doc capture and oracle distributed doc capture products,
currentyly i've problem in the commiting feature from the web oddc client,
after i scanned documents, i click send, (im using text commit profile)
but when i check in the commit folder at the capture server, there's nohting in it
(i've use c:\odc\commit for the commit folder)
but there's something in the IIS webcapture clientaccess folder (C:\Program Files\Oracle\Document Capture\WebPages\ClientAccess)
its a .PAK file name, when i open it in winrar, its indeed the document that i scanned and send from the client.
but why is it stored in here? what's with the .PAK format, and how to configure the settings properly for storing
files with its proper format (TIFF, JPG, PDF) in the server ??
i'm using recent odc and oddc from oracle, in windows 2003.
any help will be appreciated, if this works, i'll try commiting to ucm (so far it isnt working also)

thank you ram for your response,
yes you're right i actually didnt notice there are ODDC service in in windows service list,
when i started it (not automatically started when installed) the package get "commited".
ok, now that the service is up, there are new problems here,
i want to integrate ODDC with UCM, ie: commiting to UCM,
when i commit to UCM, and check ODDC log, it seems that it results in an error, like this ...
06/19/09 04:01:32 PM 16957538_16957559 extracted into C:\Program Files\Oracle\Document Capture\WebPages\ClientAccess\16957538_16957559.
06/19/09 04:01:32 PM Start processing UCM-16957538. File Cabinet: cab-ucm; Create User: ADMIN; Modify User: ADMIN; Computer Name: COOLPIE\COOLPIE; Create Date: 6/19/2009 3:58:58 PM; Modify Date: 6/19/2009 3:59:19 PM.
06/19/09 04:01:32 PM Client Version Number: 10.1340.6.
06/19/09 04:01:32 PM UCM-000000000010 (ID: 21) created in cab-ucm with 1 pages from UCM-16957538.
06/19/09 04:01:33 PM ***Error*** Failed to process batch 16957538_16957559. Error Number: 40008, Error: Failed to commit batch (with delete). Commit Profile - commit-ucm: The following error was reported by ReleaseDocument. Error Number: 20004 Error Description: Server returned HTTP response code: 503 for URL: http://192.168.40.44/idc/idcplg
what's this error about, is there any detail information what causes it (just 503 code??)
thanks,.. and what is the best practice setting for making ODDC successfully commits to UCM.

Distributed Document Capture Commit problem

hi i'm working with Distributed document capture and I have a problem that is driving me crazy :
I have an installation of Distributed document capture on a SQL server 2005 database, and I use web client for scanning.
In DDC admin I have created a File cabinet with a 'Commit to text file' commit profile. Also I have a Scanning profile with comit option set to 'Commit', which is supossed to commit automatically the documents when you send documents to the DDC server.
When I scann documents in my web client, I click send locally and and a PAK file appears on the server side in the IIS webcapture clientaccess folder (C:\Program Files\Oracle\Document Capture\WebPages\ClientAccess), and the PAK is uncompressed showing my image and an .xml file containing indexing information and everything seems ok. Oracle Distr. Document Capture Service is up and running, and seems ok.
I have c:\commit as my commit folder, but the server never writes anything in this folder (it is supposed to write a .txt file). It seems that every minute or so the ClientAccess folder is checked and the information touched by the service or other daemon, but nothing appears in the commit folder.
I have tried also to commit to a database, creating appropiate table in sql server, but that doesn't work neither.
The strange thing is that wit NON distributed version of ODC + access DB installed in a different machine, both commit to tex file and to database work properly.
Any ideas of what could be failing on the distributed version ?
Many thanks for your help,
Plan.

i have a problem with the labels of indexing fields at the client applet ?
i've changed (NS_LANG) to become (AMERICAN_AMERICAAR8MS....) this was helpful for the pick-list but the labels still unknown . even after selecting a known word from the drop-down list it become also unknown like the label
i've changed the unicode of the web page but this is useless ,
any idea ?

How to get connected to OIPM from Oracle WebCenter Document Capture

Hi,
How we get connected from Oracle WebCenter Document Capture(ODC) to Oracle WebCenter Cintent:Imaging (OIPM). OIPM is 11g and ODC is 10g. Pls suggest any doc or link.
Thanks and Warm Regards,
RR.

Reading your previous question once again, now I think you have actually asked a simpler question than I answered to. Is it that you just need to anyhow send data from ODC to IPM?
If so, it is a standard functionality of ODC, called Commit Profile. I have never worked with IPM, but there is one to UCM and it works the way that you use administrator's login (such as sysadmin in 10g or weblogic in 11g) for authentication and then you map ODC user to a metadata field (in UCM there is a mandatory field called dDocAuthor and there should be value of an existing user; but you can you the administrator here as well, if ODC user info is not important for you). I believe IPM will behave similar.
What you have to check, whether commit profiles are available for IPM 11g, but I believe they are.
As for the documentation, the link I mentioned before contains both installation and configuration manual, so you should find all the info there.

Distributed Document Capture internationalization

Hi,
Is there any way to internationalize Distributed Document Capture. One of customers requires all user interfaces in national language (in this case - Polish).
Regards
Kuba

ODDC is built on the Microsoft technology stack and I beleive that internationalization can be done only by changing source code (which we don't have access to).
Regards,
Boris

Oracle distrebuted document capture commit problem

hi,i am working with ODDC v10.1.3.5 using (UCM 11g commit driver) and every thing is going well except one problem that is when i commit to ucm there is a field called(subject) is not commited to UCM even it is maped through the commit driver .
at the document title field(at Commit Driver Configurations) ,i use it as a compination of multible fields (Name-Subject-Date) ,UCM can see the value of (Subject) Field at this position but at the (subject) field (on UCM) it is empty .
i dont know what is the reason for this issue ,is it a problem whith the commit driver ?
any help will be appreciated .
Regards
H.Sweiss

Thanks Jiri,
I have started with the mandatory metadata fields only. I have resolved the previous problem.
It was because Client Access folder was not properly set.So the .pak files was still residing in the client access folder.
But now all batches are present in the Batches folder and the logs says
eg: 07/13/10 04:48:10 PM 19360358_19360532 extracted into C:\Program Files\Oracle\Document Capture\WebPages\ClientAccess\19360358_19360532.
07/13/10 04:48:10 PM Start processing DS19360358. File Cabinet: captureDocuments; Create User: TEST; Modify User: TEST; Computer Name: MUKESHLT1\MUKESHLT1; Create Date: 7/13/2010 4:45:57 PM; Modify Date: 7/13/2010 4:48:52 PM.
07/13/10 04:48:10 PM Client Version Number: 10.1350.26.
07/13/10 04:48:11 PM DS00000000000023 (ID: 24) created in captureDocuments with 1 pages from DS19360358.
07/13/10 04:48:11 PM DS00000000000023 (ID: 24) is committed, number of documents: 1, total page(s) committed 1.
07/13/10 04:48:11 PM Post processing batch DS19360358. File Cabinet: captureDocuments; Batch ID: 24; Create User: TEST; Modify User: TEST; Computer Name: MUKESHLT1\MUKESHLT1; Create Date: 7/13/2010 4:45:57 PM; Modify Date: 7/13/2010 4:48:52 PM.
07/13/10 04:48:11 PM 19360358_19360532 deleted.
07/13/10 04:48:11 PM
But it is still not sending to UCM.
Is there any setup to commit these batches?

Oracle distributed doc capture - database error

hi all,
i work at project ( capture , archive ) and i implement the ODDC ( instalation and integration )
i do all configure include scanning profiles ( the last step )
then when i do test the system i find that there is no data saved upon scanning and after commit else data in the commit table i build and mapping with the index fields and ECAudit table , but no data in tables like EcBatches and more,
i see more than one column with type blob ( i mean column in capture system core tables like ECBatches)in many tables ( these tables not contain any data ! )
i use the evaluation period license
oracle 10g release 2
win server 2003 stander edition R2 sp2
any Idea please ??!!!!!

its started !!!, but is there any blob field in the capture system usual database ??
i mean the system database that the capture build it ??? is there any blob field ..... any idea please ??
what about the check integrity utility is it stable ? what can do for me ?
i tired with this problem ... any one can help me please ?
is there any data must add to the database before the commit operation ??
i dont have any data before and not all tables collect data just the ECAUDIT and my commit tables where the index fields saved i name it ( dbcommit ) with this tables
database info
user: capture
password: capture
database: capture
commit table:
DBCOMMIT
column name: DataType size description
PERMIT_ID integer
DOC_TYPE varchar2 500 ( from 1 to 14 from pick list)
AREA_ID integer default = 09
SCAN_DATE date
USER_ID integer
DOC_PATH varchar2 500 document path on capture server
INDEX_DATE Date
when i do select statment like :
select * from ECBATCHES;
i get the error SP2-0678
its mean :
The "SP2" error messages are messages issued by SQL*Plus. The SP2-0678 error message text is "Column or attribute type can not be displayed by SQL*Plus." What you probably tried to do is to dump a binary data type, i.e. BLOB, to the screen in SQL*Plus. The problem is that SQL*Plus can only handle text data. It cannot handle binary data. Therefore, you are getting an error message telling you that this data type can not be displayed in your SQL*Plus session. Try your SELECT statement again but eliminate the BLOB column(s) from your query.
the question is why there is some column type " BLOB " in the table like " ECBATCHES " and the other column is not blob its varchar2 and integer .... and these column empty !!! there is error somewhere but i tired re install it in new machine and database but nothing change !
any IDEA please :(
Edited by: yos on Nov 21, 2008 3:56 AM

Document Capture OCR missed interperted Western Latin characters

Hi,
I'm using the OCR function to read words with Latin characters, but the reading is not being done in the correct way this is the character "à" appears as "6" and the same is happening for other characters.
Is any way to define the character set?
Edited by: carlos.pereira on Nov 12, 2008 7:01 PM

A new feature was added in the 10.1.3.4.0 release of Oralce Document Caputre to allow for selection of your OCR settings. These settings include the Language to be used for the OCR engine to interpret.
You can get to these settings by going to the System menu and selecting "Settings". If running anything older that 10.1.3.4.0, these settings will not be available.
There is a chance that when you make this setting change that it will still misinterpret the characters in your data. In that case, you may be able to improve your results by adding creating a custom Index macro.

ODDC / Document Capture: Barcodes

Does anyone have any experience using BarCodes with Oracle Distributed Document Capture? I see that Barcodes are available via the Recognition Server which is only available through the non-Distributed Document Capture, I believe.
I read that a Electronic Document Provider (EDP) macro can be applied to ODDC batches. There's a barcode reference in the BatchPages obj. I'm working on attempting to apply one of these now, but I'd like to see if there's any access via a ODDC macro script.
Anyone have any ideas?
Thanks!

Hi,
Yeah, I have setup a macro to read barcodes from a batch header. We use the bar-code to apply high-level indeixng of the item.
I used the EDO.edoBatchPage object and dimensioned a variable to this object, then use the BarCodes() method for this object.
I know this is pretty vague, let me know if you have any specific questions.
Cheers.

Oracle distributed document capture OCR

Similar Messages

Maybe you are looking for