Oracle E-BS 11.5.10.2 didn't work after copy from RHEL 4.4 to RHEL 5.3

Hi,
Source:
Oracle database server : 10.2.0.3
APPLICATION =11.5.10.2
RHEL =4.4
Target:
Oracle database server : 10.2.0.3
APPLICATION =11.5.10.2
RHEL =5.3
I just copied filles from source to destination.
Has someone did similar way? If yes was any issue during such migration?
Please advice.
thx

Hi,
You cannot simply copy the files and expect the application to work properly. Instead, follow the steps outlined in the Rapid Clone document.
Note: 230672.1 - Cloning Oracle Applications Release 11i with Rapid Clone
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=230672.1
Make sure you apply all pre-req. OS packages on the target nodes, and install all pre-req. software on the source/target nodes.
Regards,
Hussein

Similar Messages

  • Indesign didn't work after installation from cc

    The first time I had installed Indesign it didn't open up. I had uninstalled and reinstalled it. Still it didn't open.The attached message comes always. Please let me know if anybody cen suggest a solution for this.
    Thanks & Regards
    Muralidhar Cherukuri,India

    Hi,
    You cannot simply copy the files and expect the application to work properly. Instead, follow the steps outlined in the Rapid Clone document.
    Note: 230672.1 - Cloning Oracle Applications Release 11i with Rapid Clone
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=230672.1
    Make sure you apply all pre-req. OS packages on the target nodes, and install all pre-req. software on the source/target nodes.
    Regards,
    Hussein

  • My playlist didn't show up on new laptop after copying from the old laptop

    What can I do when my playlists didn't show up on new laptop after copying from the old one?

    abombaci wrote:
    I just simply copy only the whole iTunes music folder to my external hard drive, that's it and it goes good. That way if you just copy the whole iTunes folder it also carries along with it all it's subfolders. If subfolders aren't carried over you may end up with a library with missing album arwork. Album artwork, iTunes media folder, itunes previous libraries, itunes XML folders etc., etc. You get the picture.
    Yes.
    This is much better way than changing the media folder location.
    Keep everything in the same iTunes folder.
    However, when I do it this simple way as compared to the Apple way it doesn't save my play counts or ratings.
    Since it is exactly the same library, everything should be the same.
    Then just go to external drive click on iTunes folder and then in iTunes add folder to library and all your songs load up. This isn't moving the library but just backing it up.
    You don't need to add anything.
    Hold Option and launch iTunes.
    Select Choose library... and select the iTunes folder you copied to the external.
    You can delete then /Music/iTunes/ folder as this same folder was copied to the external and this is now your iTunes library.
    You can also do this top make a backup of the iTunes library (thoug you should be making a backup (Time Machine or some other backup program) of yoru entire computer.

  • The report generation toolkit didn't work after the vi was build to an application.exe

    I write a VI using LabVIEW Report Generation Toolkit , it really works in the LabVIEW7.1 and 6.0 enviroment. but after the VI was build in to an application.exe, the LabVIEW Report Generation Toolkit didn't work even the application runs.
    thanks for your help.

    You might want to follow the procedure here:
    http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/86256a47004e16d186256a84004cb883?OpenDocument
    (If the URL doesn't work, you can search for NI document ID: 2B87TVI8)
    Dan

  • My MacBook didn't work after the last update OS 10.7.2

    I have MacBook Pro, i5 dual core 2.4. Just bought it yesterday and updated the OS to 10.7.2. after the update by less than tow hours, the mac shutdown and didn't work and not accepting the charger also!
    Please guide me what to do with this issue

    Bring it back to the store you bought it from. You are under a 1 year warranty.

  • Sounds didn`t work after update to iOs 7.1

    After the update to iOs 7.1 the sounds (incoming calls, Whats App, Facebook) didn`t work on my iPhone 4 when the screen is locked. If I like to hear music or the screen is unlocked, they work.
    Can somebody tell me what happened and how to solve that problem? Thanks for your help!

    No problems with Wi-Fi on iOS 7 here.
    Try restoring the software > iTunes: Restoring iOS software
    Might want to try this first ...
    Tap Settings > General > Reset > Reset All Settings

  • Oracle 11g RAC on CentOS 5.2 - Node isnt working after hardware failure

    Hi,
    We have a 2-node Oracle RAC 11g running on identical nodes with Centos 5.2 as operating system.
    Due to a drive failure and a reboot yesterday, the ASM disk, which is onnected via iSCSI, changed from sdd to sdc in name - (the faulty raid drive was removed, thus the change).
    The oracle services didnt start, which appeard perfectly logical at the time, given that the ASM disk suddenly wasnt where it was supposed to be, but even today after a replacement disk was inserted, the RAID rebuilt + with the ASM disk back to its original naming in /dev/; the node doesnt seem to work properly. Some of the oracle services are running, but there seems to be a problem with the listener, which might also explain why the node does not set it's virtual ip after starting up.
    Luckily, the other one is unaffected and is working perfectly fine..
    I'm far from having a clue about oracle, it was sheer luck (that, and the very usable documentation by oracle) that i managed to get that cluster running in the first place... I know my way around linux, so if it's a operating system related problem i'll be able to fix it, but i cant figure out what the problem with oracle is.
    The listener doesnt seem to be running
    [oracle@serv-211 ~]$ lsnrctl status
    LSNRCTL for Linux: Version 11.1.0.6.0 - Production on 08-JUN-2010 11:12:00
    Copyright (c) 1991, 2007, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    TNS-12541: TNS:no listener
    TNS-12560: TNS:protocol adapter error
    TNS-00511: No listener
    Linux Error: 111: Connection refused
    Manual starting works, but not with the result i hoped for
    [root@serv-211 oracle]# lsnrctl status
    LSNRCTL for Linux: Version 11.1.0.6.0 - Production on 08-JUN-2010 11:32:16
    Copyright (c) 1991, 2007, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.1.0.6.0 - Production
    Start Date 08-JUN-2010 11:30:42
    Uptime 0 days 0 hr. 1 min. 34 sec
    Trace Level support
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Log File /opt/oracle/11g/diag/tnslsnr/serv-211/listener/alert/log.xml
    Listener Trace File /opt/oracle/11g/diag/tnslsnr/serv-211/listener/trace/ora_22694_140227439994592.trc
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=serv-211)(PORT=1521)))
    The listener supports no services
    The command completed successfully
    [root@serv-211 oracle]#
    While other services appear to be fine
    [oracle@serv-211 ~]$ crsctl check crs
    Cluster Synchronization Services appears healthy
    Cluster Ready Services appears healthy
    Event Manager appears healthy
    I feel a little lost in the vast amount of logfiles, a point in the right direction might actually be enough. I cant image it can be that serious.
    Please assist
    Regards
    Edited by: user9134821 on 08.06.2010 02:39

    Hi,
    As usual, as soon as i post a problem in some board, i find the solution myself.
    Although this way isnt really "linuxy", deleting the listener with the netCA tool and adding a new one solved it.
    Regards.

  • Oracle Portal not working after upgrading from 1.0.2 to 1.0.2.1

    Hi All,
    Previously I had
    9iAS : 1.0.2.0.0
    Portal: 3.0.7.6.2
    OS: Win NT
    and I upgraded to
    9iAS: 1.0.2.1.0
    Portal: 3.0.8 (using scripts)
    Now the scenario is
    I can access: Apache, Servlet(IsItWorking) and JSP samples. But now I can't access Oracle portal (ie http://host:port/pls/portal30/). Even Login Server is coming properly (ie http://host:port/pls/portal30_sso/)
    There was no errors during upgrade scripts. Also I check the portal30 schema for invalid objects. But there were no invalid objects in that schema.
    According to me, all the modules of apache are working only except mod plsql and so i can not access Portal. It gives misconfiguration error from apache. So what can be the problem??
    Any ideas in this.
    Thanks in advance.

    There was an issue reported on this upgrade having to do with multiple entries in the Apache configuration files. Check your .conf files for duplicate entries.

  • I attempted to update itunes (Windows 7) it didn't work, after several tries I uninstalled itunes completely, and now I cannot get it to reinstall correctly. help?

    Had issues upon updating iTunes to newest version (11).
    The display settings were not working, I tried to run it in compatibility mode for Windows 7 Service Pack 2, which i'm currently running.
    Still had major issues, couldn't click anywhere on the iTunes window, the only thing I could click was file but even then the dropdown menu wasn't working correctly.
    I tried several times to adjust my computers' settings to accomodate the new version, and still nothing worked.
    I got fed up, and uninstalled the lastest version and now I am having trouble reinstalling.
    I tried the latest version a few more times, and now when I click download on the site link, it doesn't even prompt the download window in Mozilla.
    It doesn't create a location anywhere within my computer either.
    I downloaded 10.7 in hopes of that maybe working, I figured because I haven't updated the iOS on my phone, and my computer is still a little behind that this might help, but it says,
    "itunes library.itl cannot be read" and something to do with having a new version of the file already.
    I just want to have some version of itunes on here, I still have Bonjour, though I think with the issues I am having the Software update must be gone along with any itunes program I previously had.
    I cannot restore any previous versions because I haven't backed it up on to anything for quite some time.
    I just want to manage my iPhone 4 again, and this is driving me nuts.
    Any help is very appreciated,
    thanks for reading.

    The Problem is resolved by :
    Click on the "Start" button. Click "Run." Type the word "cmd" in the open box. When the DOS screen comes up, type "netsh winsock reset." Press "Enter." Type "exit" to close the DOS window and go back to Windows.
    Restart the computer.
    Thanks to my friend Sunil.
    Read more: http://www.ehow.com/how_2125133_do-winsock-reset.html#ixzz2kyccghec

  • Canon C7065i didn't works after mavericks update

    it said "cannot communicate with the printer, or the printer is not supported."

    I have now managed to get the Canon LBP6300dn printer working on my network (i.e. I did not use USB at all).
    In case it helps others, here are the steps I performed.
    Infrastructure:
    My printer is connected by LAN cable to my Airport Extreme.
    The Airport Extreme has a DHCP reservation defined for the printer (e.g. fixed address of 10.1.2.3).
    I need A4 as the default paper size, so I installed the UK version of the driver (Mac_CAPT_V365_uk_EN.dmg). I do not know if the locale makes any difference.
    I orginally set-up the printer  when I used Mountain Lion.
    My Mavericks installation on my laptop was clean (i.e. the hard disk was reformatted first)
    Set-up:
    The printer was switched on and installation was done on my Mavericks laptop over WiFi.
    Double-click the .DMG file and follow the instructions.
    Open System Preferences | Printers & Scanners.
    Click + to add a new printer, the Add dialog should open.
    For me, nothing appeared under the Default tab.
    Click the IP tab.
    In the Address: field: I entered the fixed IP address of my printer (e.g. 10.1.2.3).
    The IP address should be automatically validated.
    The Protocol: Field was set to Line Printer Daemon - LPD.
    After a few seconds, the Use: field should display “Generic PostScript Printer”
    Click on the Use: field’s menu to display available options and then pick “Select Software …”
    In the Printer Software dialog, select “Canon LBP6300 CAPT (UK)” . Or the equivalent for your locale. Click Ok. Note: I could not get the “Canon LBP6300n CAPT (UK)” to work.
    For me, an error “Unable to verify the printer on your network appeared”, but I clicked Continue.
    I left the Paper Source Options set to none. (I do not have the 500 cassette.)
    I clicked Ok to finish the adding of the printer
    After this the printer was finally working for me, including duplex printing.
    Anyway, I hope this might help others that are struggling with Mavericks and the Canon LBP6300dn printer.

  • HT4623 I tried to update my iTunes tonight....waited and now it says something is corrupt??  I also tried to update my iPad and it didn't work after waiting for 4 hours for that one.  I need a remote access and John Whitaker is the one I want to do this f

    What is going on with my iPad update.  I waited for four hours letting it "update" and after the alloted time, it tells me that I needed to update my iTunes first.  After doing that, I can't even get into my iTunes.  It says a file is corrupt.  This is making me less and less impressed with these updates.  I have trouble 80% of the time.

    What iPad model and what iOS is it currently running? Are you trying to update the iOS via wifi or connected to your computer?
    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • Fingerprints didn't works after few hours usage

    Hi, im using iphone 6 running ios 8.1.2. Had this fingerprints problem, after a view hours of usage my fingerprints works fine. But the next hours it stop working. after i try to setup the fingerprint scan, it doesn't work and i'm not able to set it up even the menu is "greyed" and keep showing the "failed" message. Please help. Thanks for advance.

    Hey iPhoneuser001,
    Are you using a protective case with the iPhone? If so, try testing without it.
    Also try restoring the iPhone. http://docs.info.apple.com/article.html?artnum=305744
    Jason

  • Microfon didn't work after update to ios 7 from iso 6.1.3

    A can only use speaker or headphones to make/receive calls. Any ideas, please?

    No problems with Wi-Fi on iOS 7 here.
    Try restoring the software > iTunes: Restoring iOS software
    Might want to try this first ...
    Tap Settings > General > Reset > Reset All Settings

  • CDM didn't work after upgrade

    I've upgraded a Tarantella 3.40.952 to SSGD 3.40.977, (rpm -i nodeps force tta_4.20_977.i.386.rpm). All works fine but the CDM don't. CDM was active since the first installation (3.30.903), the application server is Win2003, I've installed the enhanced module downloaded from Sun site.
    Any suggestion?
    Max

    It's recommended to reformat your device after installing symbian anna.
    Reformat - Type *#7370# and the phone's lock code (Nokia default lock code is 12345). Warning! This reset wipes your C drive/phone memory! On Symbian^3 devices mass memory gets wiped too.
    Hope this helps.
    If you want to thank someone, just click on the blue star at the bottom of their post

  • PVZ didn't work after software update

    PVZ wouldn't open after I updated my ipod touch software. It just shows the PopCap logo then goes back to the ipod screen. Other applications also did not open after the software update but went back to normal after I updated these other applications. Does this mean I have to update PVZ by purchasing a new version?

    Thanks! I tried the "reinstall affected application" in the troubleshooting page but when I went to app store to download the application again, it didnt say anything about me having paid for that application before and that i'm just reinstalling.. it just said buy.. I clicked it anyway. I hope that's normal but I won't get charged for it. or did I do it wrong?

Maybe you are looking for