Oracle EBS 12.1.3 and SOA 10g hardware sizing

Hi All,
To give you the background, we have integration requirements where in one of the interface about 20000 sales orders come in the system everyday and they have about 3-5 lines per sales order. Most of these orders come between 3-6 PM. We have 50 other interfaces along with this but this is a major one. Client is concerned about performance and so we have to give right design and right hardware sizing so that the system is able to handle all the load without causing performance issues. We are planing to use Oracle EBS 12.1.3 and SOA Suite 10.1.3.5 (10g)
Any processes, documentation on how to go about hardware sizing, tools will be helpful
Thanks,
Rahul

Any Updates??

Similar Messages

Problem in installing Oracle database 10.2.01 and SOA suite


Hi ALL,
I have the following two problems.
I get a windows error saying "oui.exe has encountered a problem and needs to close. We are sorry for the inconvinience" whenever i try to install Oracle database 10.2.01.(problem 1)
However, i used the Oracle database from other system and installed SOA suite on my system. It was working fine until recently when it failed to start. I had only one option i.e. to deninstall the SOA suite.(i used the oracle deinstaller to deinstall the SOA suite) . When i tried to reinstall it again, i got a warning saying "DHCP configuration was detected on this host. The installer also detected that the local host name and the network hostname differ". When i ignored this warning and continued the installation, the set up falied to detect the Oracle database which i had used earlier(problem 2). Do I need to clear any logs or do i have any way to sort out these two problems. Please help. ?:|



i am trying to install the SOA SUite against locahost. I have installed the loop back adapter but facing the same problems that i used to face earlier.

Oracle EBS 11.5.10.2 with 10g R2 database

Hi,
We are installing the Oracle EBS 11.5.10.2
After installing we need to updrade the Database 9i to 10G R2. .
So instead on upgrading 9i to 10G R2 afterwords, Can we get the stage or software of Oralce EBS 11.5.10.2 with database 10g R2 from Oracle on Oralce Edelivery web site.
Thanks,

Oracle E-Business Suite 11.5.10.2 comes only with 9i database. If you want to upgrade to 10gR2, please refer to:
Note: 362203.1 - Oracle Applications Release 11i with Oracle 10g Release 2 (10.2.0)
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=362203.1

Facing issues with Oracle11i and SOA 10g integration using Business events.

Hi ,
I have created a custom business event and have added subscription for the same.
When i am triggering a business event, event is raised and the event data is getting inserted in the Queue (AQ).
In SOA i have created an OracleApps adapter that is listening to the queue ,
but the Oracleapps adapter is not getting started even though there are data in the queue.
I checked the WSDL file of Oracleapps adapter and there i can see there is field Consumer with some code.
I have added the code snippet from Oracleapps adapter wsdl.
<pc:inbound_binding />
<operation name="DEQUEUE">
<jca:operation
ActivationSpec="oracle.tip.adapter.apps.AppsWFBesQueueDequeueActivationSpec"
QueueName="WF_BPEL_Q"
DatabaseSchema="APPS"
Consumer="ORA_88p3cd9o74pj2cpg6p13cdhp75"
MessageSelectorRule="tab.user_data.event_name = 'xxc.oracle.apps.soa.demo'" >
</jca:operation>
I have checked the connection factory set up at loaction (application-deployments\default\AppsAdapter/oc4j-ra.xml)too and found it is correct.
code snippet from oc4j-ra.xml:-
 <connector-factory location="eis/Apps/Apps" connector-name="AppsAdapter">
 <config-property name="xADataSourceName" value="jdbc/EBSDataSource"/>
 <config-property name="dataSourceName" value=""/>
 <connection-pooling use="none">
 </connection-pooling>
 <security-config use="none">
 </security-config>
 <connectionfactory-interface>javax.resource.cci.ConnectionFactory</connectionfactory-interface>
 </connector-factory>.
Can anyone tell me where consumer for an event/queue is being defined in the Oracle apps.
Thanks & Regards
Saurav Kumar

Hi,
Can you check the log file.u are getting any error.can you check wf_error table also u are getting any error.
Can you check consumer in AQ tables.
Thanks,
Rahul

Oracle EBS R12: Install, Patch and Maintain Applications 1z0-238

Hi,
I am planning to give the above exam. Can you please let me know if this exam is for R12 or R12.1.1 or 12.1.2 version ? I mean which version of documents i should refer for practicising this exam.
Thanks in advance.
Suneel

Hi Suneel
Herewith a suggestion about what docs to use
First see the exam objectives
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41&p_org_id=1001&lang=US&p_exam_id=1Z0_238
Try to get your manager&company to finance you some training course
Recommended Training and Preparation
R12 Oracle: Install, Patch and Maintain Oracle Applications
OR
R12 Oracle: Install, Patch, and Maintain Oracle Applications - LVC
if not possible with the exam objectives read the proper chapter from the documentation
http://download.oracle.com/docs/cd/B34956_01/current/html/docset.html
and this excellent blogs contains also advices http://www.oracleappsblog.com/index.php or this book could be something ? http://www.amazon.com/Oracle-Applications-DBA-Covers-11i/dp/0070077290
hope this helps

Oracle EBS 11.5.9 and Database 9i

Hello,
We have a situation,
We want to use RAID COntroller on Pseries Machine which requires that we must have AIX 5.3 TL 003
But if we install AIX 5.3 TL we get with it APAR IY68989 and APAR IY73497
After Cloning OR upgradation of OS mainentance level , user is getting " ORA-01402 : no data found "
ORA-01402 : no data found
OR
'FRM-40815:Variable GLOBAL.LLL(xx) does not exist'
Direct to the point, the issue is
1- After the installation and the post installation tasks went successfully I tried to create a user from sysadmin responsibility and I faced the following error when trying to display responsibilities to that user.
ORA-01403: no data foundFRM-40502: ORACLE error: unable to read list of values.
FRM-40815: Variable GLOBAL.LLL(xx) does not exist.
This problem seems to affect several different LOVs.
According to metalink note 338469.1 the problem is related to IBM OS security patches (APAR IY68989 and APAR IY73497) and there are 2 solutions for this problem
Solution
1. Please execute the following OS command to check if patches APAR IY68989 and APAR IY73497
# instfix -ik IY68989
# instfix -ik IY73497
2. Workaround:
Revert the patches (APAR IY68989 and APAR IY73497 ) applied in the system
Note :- If the status of the patch is "applied" , then it can be rolled back ,but if it is "committed" then it can not be rolled back
3. Permanent Solution:
If the above patches are present in your system , please do a Help / Info about in any form, you will get the Oracle Forms version like 6.0.8.x.x .
As per your forms version, please apply the appropriate patch from one listed below
For Release 11i
o     Patch: 4689213 (forms version 6.0.8.24.x i.e Patch-set 15)
o     Patch: 4670400 (forms version 6.0.8.25.x i.e Patch-set 16)
o     Patch: 4689364 (forms version6.0.8.26.x i.e Patch-set 17)
o     W.r.t internal Bug 4698290 , fix for this is included in Patch-set 18 (i.e 6.0.8.27.x ) and later
For R12
o     Patch: 4698290 (Forms version 10.1.2.0.2)
o     W.r.t internal Bug 4699197 , fix for this is included in forms version 10.1.2.2.0
However , the version of forms which we have is :
$ which f60gen
/oratec/prodora/8.0.6/bin/f60gen
$ f60gen |grep Forms|grep Version
Forms 6.0 (Form Compiler) Version 6.0.8.21.3 (Production)
So there is no patch for it from ORACLE or AIX
Upgrade of forms is not a possibility because we have too many customized forms.
Now,
1) Anyone has a solution for this problem ?
2) Will 11.5.9 work with AIX 6.1 or AIX 7.1 ?

No, except you upgrade your developer patchset which should not be an issue for the customized forms you have.
Can you please explain more in detail about this option and i will be thankful. Appreciate your help.Please see (Upgrading Developer 6i with Oracle Applications 11i [ID 125767.1]) for the steps you need to follow to upgrade your developer patchset.
Your custom reports should work find after this upgrade, and in case you have any issues you can try to compile those forms again -- How to Generate Form, Library and Menu for Oracle Applications (11i and R12) [ID 130686.1]
Thanks,
Hussein

File -- Export in oracle EBS forms- headings missing and order incorrect

We have a custom form for our custom billing processes. It lists all the draft invoices that are ready to be released along with multiple custom fields. When the user tries to export the data in this form, tsv file is saved.
We have the following issues with the file.
-- We have some fields missing
-- Some column headings are missing
-- Fields are not exported in the right order
Can someone help how we can fix these 3 issues?
Thanks!

Please post the details of the application release, database version and OS.
Please see the links/docs referenced in this thread -- File -> Export Option Functionality is not working with CUSTOM 10g Form
Thanks,
Hussein

Oracle Back end job procedure and forms 10g

Hi friends,
I have to insert employee joining date into "B_join" Table from "Emp" table , with Flag of "IN" (inserted) after 10 Min the Flag has to be changed "VA"(validated), for this i have to create oracle job in the backend, before
1)shoud i need to create procedure which is inserting data into "B_join" table?
2)the same procedure i have to use it in the job procedure?
3) i have to show Message to the Manager in the forms as "Hello Sir tomorow is joning of emp1,emp2,emp3,,emp4.......( list extends as per empployee).
advice me
Thanks and Regards
VeeKay

Hi friends i have created this procedure
CREATE OR REPLACE PROCEDURE sms_insert1 is
CURSOR c_update
IS
SELECT *
FROM emp
WHERE TO_CHAR (dob, 'ddmm') = TO_CHAR (TRUNC (SYSDATE + 1), 'dmm');
r_update c_update%ROWTYPE;
m_emp_cpr NUMBER (9);
BEGIN
FOR r_update IN c_update
LOOP
INSERT INTO b_join VALUES ('10000001',
r_update.emp_name,
'EN',
r_update.emp_cpr_id);
EXIT WHEN c_update%NOTFOUND;
END LOOP;
commit;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
dbms_output.put_line ('NO employees joining is tommorow');
dbms_output.put_line ('NO employees joining is tommorow');
WHEN OTHERS
THEN
dbms_output.put_line ('recheck the employee details');
END;
I have to insert employee joining date into "B_join" Table from "Emp" table , with Flag of "IN" (inserted) after 10 Min the Flag has to be changed "VA"(validated), for this i have to create oracle job in the backend.
I have run Scheduled Job
BEGIN
Dbms_Scheduler.create_job(
     job_name     => 'DEMO_INSERT_NEW'
     ,job_type     => 'STORED_PROCEDURE'
     ,job_action     => 'SMS_INSERT'
     ,start_date     => SYSDATE
     ,repeat_interval => 'FREQ=MINUTELY'
     ,enabled     => TRUE
     ,comments     => 'JOINING DETAILS INSERT.');
END;
LATER I HAVE RUN THIS PROCEDURE ALSO
SQL> EXEC DBMS_LOCK.SLEEP (10)
data is not inserted in to the table
and how do i change the flag "IN" to "VA" in the table?
shall put the procedure in DB Trigger?

Oracle EBS drill link targets for EAM Work Order and Asset

Hi All - I am running Oracle EBS 12.1.3 and OBIEE 11g and I'm trying to link from OBIEE to EBS, but struggling to find the target functions / parameters to provide a direct URL link to EBS EAM Work Order and Asset. I have successfully linked to a Purchase Order View page, I would like to find the similar for EAM Asset and Work Order.
I can see some parameters in WorkOrderDetailsPGCO but can't seem to work out how to get to the page from a URL.
For reference MOS Note 555254.1 has some details, but not for EAM.
Has anyone provided users in any reporting system with a link to EAM Work Order or Asset page and if so how were the links generated?
Thanks,
Gareth

I am giving this a bump as I really need some help with this. Is I run the SQL with TOAD or SQLPlus it seems to consistently runs fine, The problem seems to only be from APEX. I think it has do to with the non-persistent state.

Oracle ebs is not opening in mozila

Dear Experts,
I am having oracle ebs 12.1.3 and it is opening in internet explorer whilst its not opening in Firefox Mozila 26.I am able to login but after that page is not opening ,
Could you please share your remarks to sort out this issue?. I have removed and reinstall the Mozilla also.
Thanks

Hi,
Try on a certified version
https://blogs.oracle.com/stevenChan/entry/firefox_24_certified_with_oracle
Recommended Browsers for Oracle E-Business Suite Release 12 (Doc ID 389422.1)
Regards
Yoonas

HTTP check RW-5001 - Oracle EBS 12.1.1 Rapidwiz on RHEL 5 VMWARE Fusion

Dear All,
I have been attempting to install Oracle EBS 12.1.1 Using Rapidwiz on RHEL 5 VMWARE Fusion for the past month, i have run through the install on a few occaisions now just to ensure that i have followed all the pre-reqs correctly and also set up the guest OS as described in several posts including (http://www.oraclenerd.com/2009/12/ebs-install-guide-part-1.html, http://gerardnico.com/wiki/ebs/installation and always refering back to My Oracle Support Doc ID 761566.1: Oracle Applications Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64.
I have installed (prior to running rapidwiz) the oracle recommended patch p6078836_101330_LINUX.zip and confirmed from the install that the Database listener and Database are up and running (checked by running the db.env script and running addbctl.sh and addlnctl.sh respectively). However, the rapid install completes with an error for HTTP, java, Login Page, Help files, in the post intall checks.
The error displayed for the HTTP check RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
I've found posts relating to this message, and proceeded to check the status and try and start the apps services manually; however, i'm experiencing another error message;
You are running adopmnctl.sh version 120.6
Checking the status of opmn managed process...
Unable to connect to open
opmn may not be up.
Then i try and start the services manually after running the INST_computername.env scripts;
*[applvis@oracler12 scripts]$ ./adopmnctl.sh start*
You are running adopmnctl.sh version 120.6
Starting Oracle Process Manager (OPMN) ...
libopmnoraclenls.so: unable to load
*/d01/oracle/VIS/inst/apps/VIS_oracler12/ora/10.1.3/opmn/bin/opmnctl: line 898: 1228 Segmentation fault $OPMNADMIN ping*
libopmnoraclenls.so: unable to load
libopmnoraclenls.so: unable to load
*/d01/oracle/VIS/inst/apps/VIS_oracler12/ora/10.1.3/opmn/bin/opmnctl: line 898: 1234 Segmentation fault $OPMNADMIN pingwait*
opmnctl: opmn start failed.
adopmnctl.sh: exiting with status 0
adopmnctl.sh: check the logfile /d01/oracle/VIS/inst/apps/VIS_oracler12/logs/appl/admin/log/adopmnctl.txt for more information ...
I'm not a DBA and i'm just starting out to learn how ebusiness suite is installed and how the applications run in parralel to the database. (my history of oracle ebs front end development and functional support)
I know there are a few posts out there within these forums that go into some details on what this issue may be, however, i cannot find any that specifically address my type of install and OS setup, and sometimes find it hard to understand the terminology and techniques used to diagnose these kinds of issues.
What i'm looking for is for some help in diagnosing and trouble shooting my issue, i will be happy to provide any output that is required to help address the issue and will be online regularly until i can have this issue resolved.
So, if you can help, please let me know where we can start.
Many thanks
Simon

Hi All,
Problem solved, although not on RHEL 5. I started over with a clean install of OEL 5.4, completed all the pre-reqs and applied reccommended patching, install completed fine, not experienced same issues with http. Differing install steps;
A) Selected different Port pool - 67 instead of 55
B) in OEL 5 when installing, if gives you the option to turn off SELINUX, which i compelted.
C) Checking the OS, i noticed the rpm versions were quite different (probably somewhat obvious, but im not sure if this had an impact)
Although, this was a fristrating set up, i have (i think) learnt a bit more about linux and installing ebs.
Thanks all for your guidance and help
Simon

Capturing error messages from Oracle EBS APIs when using Oracle Apps Adapter

We are using Oracle applications adapter to call Oracle EBS (both R11.5 and R12) APIs. I want to understand the best practice around error handling when using Oracle Apps Adapter to call Oracle EBS.
Here are some observations:
1. Most of the APIs return X_RETURN_STATUS and X_MSG_DATA containing the status and messages if any.
2. If the MSG COUNT is 1 then X_MSG_DATA contains the message, if MSG COUNT is > 1. X_MSG_DATA is empty.
We know that when calling the API directly from PL/SQL, we need to loop through FND_MSG_PUB to fetch all messages when there are more than 1. How do we achieve the same using Apps Adapter as Apps Adapter generates the PL/SQL block to call the API dynamically at runtime.
In some APIs, which have table/rec types as input or output parameters, Apps Adapter generates a wrapper package to do conversion from SQL--> PL/SQL and viceversa. In this case the adapter calls the custom package generated which internally calls the API. For these APIs we were able to put the logic to loop through FND_MSG_PUB and return a concatenated string as value of X_MSG_DATA.
But what should we do for the APIs which do NOT have a rec/table type as input or output, in which case the Apps Adapter directly calls the API and there is no intermediate custom package?
How are others handling this?

Please see the section "Handling Functional Errors" in the below link
Oracle Fusion Middleware Adapter for Oracle Applications User's Guide

Migrating Oracle EBS 11.5.10.2 from Solaris to Linux

Hi,
I want to migrate Oracle applications 11.5.10.2 from Solaris to Linux using transportable database feature.
Please suggest how to proceed with this.
Thanks,
Anirudh

Hi Anirudh,
Please see:
https://blogs.oracle.com/stevenChan/entry/have_you_used_10gr2_transportable_tablespaces_with
And see:
10g+: Transportable Tablespaces Across Different Platforms (Doc ID 243304.1)
Cross Platform Transportable Tablespaces on 11i with 10gR2 (Doc ID 454574.1)
Master Note for Transportable Tablespaces (TTS) -- Common Questions and Issues (Doc ID 1166564.1)
R11i / R12: Oracle E-Business Suite Upgrades and Platform Migration (Doc ID 1377213.1)
R11i / R12: Oracle E-Business Suite Upgrades and Platform Migration (Doc ID 1377213.1)
Transportable Tablespace (TTS) Restrictions and Limitations: Details, Reference, and Version Where Applicable (Doc ID 1454872.1)
Best Practices for Using Transportable Tablespaces (TTS) (Doc ID 1457876.1)
Thanks &
Best Regards,

ATG Integration with Oracle EBS

Anybody worked on ATG integration with Oracle EBS for Pricing, Inventory and Order Management? I would like get more detail on the approach on the integration.

Have you looked into the error log to see whats the error message ?
The sawlog file would be located here - C:\OBIEE\OracleBIData\web\log
Paste your instanceconfig.xml file here, specifically the Auth section
Also elaborate on what are the steps you have followed for Integration so we will be able to help !!

About install the Oracle ebs Diagnostics tool

Dear all:
I want to know : when I install "oracle ebs Diagnostics tool(Oracle Diagnostics Framework)" , I shoud install in the DB server or in the AP server? My product is ORACLE EBS 11.5.9 and Database is Oracle 9i , Thank you !
Regards,
Edited by: user11975899 on 2009/11/13 上午 12:42

Hi,
You need to install the patch on each node where APPL_TOP is presented. If you have the database installed on one server (with none of the application components on this node), then you do not have to run anything on this node, just do on the APPS tier node. To launch Oracle Diagnostics test, assign "Oracle Diagnostics Tool" responsibility to the application user and run the test from this responsibility.
Regards,
Hussein

Oracle EBS 12.1.3 and SOA 10g hardware sizing

Similar Messages

Maybe you are looking for