Oracle eBS clone : only database refresh

Hi,
Someone last week around asked me regardings steps I will follow wrt database refresh in eBS.
My answer was ( considering a cold backup)
1) Restore the datafiles,redo logs to the target env adn run adcfgclone dbtier contextfile=< context file location for RDBMS>
This will work if the mount point naming convention is exactly the same as on target.
2) Run autoconfig.
My queries here are:
1) Do I need to do something regarding Apps side, ( running autoconfig , or adcfgclone etc )?
2)Was there any need for running autoconfig specially if I have given the contextfile location in step 1?
Thx,
Romit

2)Was there any need for running autoconfig specially if I have given the contextfile location in step 1?Yes, you need to run AutoConfig to populate FND_NODES with the application nodes information. You may also need to clear the FND_NODES table as described in the following note:
Note: 260887.1 - Steps to Clean Nonexistent Nodes or IP Addresses from FND_NODES
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=260887.1

Similar Messages

HOW TO configure oracle bi discoverer 11.1.3 32 bit window to oracle ebs 11

Hi all ,
How can we configure oracle bi discoverer 11.1.3(desktop and admin) installed on windows 32 bit with oracle ebs 11i with database 10g
installed on sun solaris sparc machine.
Kindly send any link which can give me step by step link for this specific scenario.
Thans

Hi Sirini,
I create workbook through Discoverer desktop and save in database, Now I like to give assign these workbooks
to the user through Discoverer view , so that they can view these worksheets, How can I view these workbooks
through Discoverer view in oracle ebs 11i.
Thanks

Integrating Active directory with oracle EBS 12.1.3 with 11g R2 database

Hi,
can any one let me know Integrating Active directory windows 2009 R2 with oracle EBS 12.1.3 with 11g R2 database software requirements and document ids for integrating.
Is windows 2008 active directory is cerfied with 10g OID??
regards,
chandrasekhar.

Hi
I found exact note
Is OID 10g/11g DIP Compatible / Certified With Microsoft Active Directory 2008 / Windows 2008 R1/R2? [ID 944298.1]
From note:
DIP 10g latest version (10.1.4.3) and DIP 11g up to PS4 / 11.1.1.5 Patchset releases integrations are certified with MS AD 2008 R1 only.
DIP 11g certification with AD 2008 R2 is supported only with DIP 11g PS5 / 11.1.1.6 Patchset or higher.
Note: Although DIP below 11.1.1.6 integration (synchronization, external authentication, etc.) with MS Windows / AD 2008 R2 may work, it is not officially compatible / certified. See also Note 1076018.1.
Regard
Helios

Oracle EBS 11.5.10.2 with 10g R2 database

Hi,
We are installing the Oracle EBS 11.5.10.2
After installing we need to updrade the Database 9i to 10G R2. .
So instead on upgrading 9i to 10G R2 afterwords, Can we get the stage or software of Oralce EBS 11.5.10.2 with database 10g R2 from Oracle on Oralce Edelivery web site.
Thanks,

Oracle E-Business Suite 11.5.10.2 comes only with 9i database. If you want to upgrade to 10gR2, please refer to:
Note: 362203.1 - Oracle Applications Release 11i with Oracle 10g Release 2 (10.2.0)
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=362203.1

Oracle EBS Database 11.1.0.7 to 11.2.0.2

Hi All,
I try to find something on internet about upgrading Oracle EBS Database 11.1.0.7 to 11.2.0.2...
All i find is upgrade your oracle R12 ebs from 11.1.0.7 to 11.2.0.2.Can any one pls provide me some links or guidlines where i can do some search about upgrade our EBS database from 11.1.0.7 to 11.2.0.2.
Cuurent EBS version:11.5.10.2
Db version:11.1.0.7
OS:Linux
Regards,
Neev

Hi Neev;
Please also see:
Interoperability Notes EBS R12 with Database 11gR2 [ID 1058763.1]
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
You can check below master note for all EBS db related issue:
Database Documentation Resources for EBS Release 11i and R12 [ID 1072409.1]
I sugest also use search mechanisim, you can find many similar issue here
Regard
Helios

Need to Clone A Database From Solaris to Linux Oracle 11g

Hi Team,
I am using Oracle Database Version 11.2.0.1.
We have 6 production servers and all of them are in solaris box. We have a new requirement from application to use Linux boxes and for that we need to perform a database refresh from Solaris to Linux box.
I can do it by Export and Import technique. But I want some other way to perform this database refresh activity.
1] Can I do it while taking a rman backup from solaris box( Source) and restore it back to Linux( Target)?
2] Can I do it using transportable tablespace method?
I am aware of performing this using export-import but as our database size is near of 1TB I can't apply this technique.
I need your suggestions in this activity, please put your opinion on the correct method I should opt for and along with that share me the supporting document where things are mentioned in step by step way.
Please let me know if this can achieved by RMAN...
Source Machine Make:-
bash-3.00$ uname -a
SunOS blrdlvdwhdb01 5.10 Generic_142909-17 sun4v sparc SUNW,Sun-Blade-T6320
Target System Make:-
Linux blrulvremoradb01 2.6.18-194.el5 #1 SMP Tue Mar 16 21:52:39 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
Regards,
Arijit

Yes, you can create a backup with rman and restore in other platform, check:
How To Use RMAN CONVERT DATABASE on Source Host for Cross Platform Migration - 413586.1
Cross-Platform Migration on Destination Host Using Rman Convert Database - Note 414878.1
but easier and faster will be with expdp/impdp.

PCG works only with Oracle EBS?

Hi, Does PCG work only with Oracle EBS? Does it not work with other products like Peoplesoft, SAP, Siebel?Thanks, Varsha

That's correct. PCG is only for Oracle EBS.

Oracle EBS Licencing w.r.t. Oracle Database

Hi Gurus,
I want to procure Oracle EBS R12 licences for development purpose for one of our client. Please suggest how to licence it?
1. Do I need to procure licence for Oracle Database Enterprise Edition if I am already procuring EBS Licences for few modules?
2. Can I continue with Oracle database Standard Edition for development purpose. In client's production environment, we have Oracle database Enterprise edition licences.
3. How to calculate bare minimum licences required for development purpose considering 10 users, 1 qaud core processors.
Please guide.
Regards,
Bhavesh

Hi Kashif,
Thanks for info but I have gone through pricing PDFs but nowhere it is listed that do we need to buy Oracle Database EE licences if we are procuring licences for Oracle EBS R12. Because Oracle Database EE comes along with Oracle EBS R12 rapid install bundle but both product are different and for both different licencing is followed.
One more thing, we want to procure licences for development purpose and hence we did not have any oracle sales representatives with us. Please guide if we can have any other option.
Thanks,
Bhavesh

Capture XML data payload into database table (Oracle EBS R12)

Hi All,
We have a XML Publisher report which generates output in PDF format. We want to capture the XML data payload generated by this report and put it into a DB table once the PDF is generated.
This report is generated through Oracle EBS R12 and XML Payload is stored by oracle by default in $APPLCSF/out directory.
Any pointers would be helpful
br

Couple of options, this one is probably the easiest without knowing other requirements (e.g., do you have to store the output as XML, or do you just the data available so you can output in XML later?).
Capture the SQL statement that generates the output in the first place. If you have that statement, you can insert into some table using the select statement. Once you have the report data (and you can tag that particular set of data with a job ID, timestamp, whatever, in case you need to store it and distinguish it from other reports down the road), you can generate XML output using the PL/SQL built-in DBMS_XMLGEN.
Is that what you are looking for?

Oracle EBS R12 - DR setup using Oracle Data Guard

Hi,
Our customer has implemented Oracle EBS R12 (12.0.6) on a Two Node RAC on HP-UX env. The application Tier also has Two Nodes(Admin Tier and Web Tier).
Oracle Clusterware - OCR and Vote Disk are on Raw Devices and the EBS database is on ASM.
Customer wants to implement a DR solution with Oracle Data Guard with only 2 servers - 1 for the Database Tier and 1 for the Application Tier on the DR Site.
I would like to know if this could be done by following note: 452056.1? I would also like to know if there are other useful docs.
Thanks.
Thiru

Hi,
Customer escalated this issue to Oracle and they came up with this reply:
They can implement Disaster recovery solution from RAC to NON RAC using Solution A which use RMAN utilities for backup and recovery.
While now AMP Application Management Pack gives the capablitiy to build non RAC from RAC Envioment, In future AMP will be capable also to support cloning of DB with Data Guard.
Details
Solution A - Using RMAN:
For Release 12 customers, you can clone from a RAC to RAC (like to like) or RAC to non-RAC. This is using RMAN scripts to take a copy of the db when it’s in archive mode. if you’re leveraging any disaster recovery tools like data guard, the above solution should work fine…perhaps some fine tuning to the procedures
Solution B - Using AMP in the future release
For Release 11i , Release 12.x customers, AMP would be offering a new cloning solution that wouldn’t have dependency on Rapid Clone. This solution leverages the strengths of EM Grid Control in provisioning or cloning targets such as databases. This would be an advance solution that would support:
o A full-fledged scale down cloning
o Cloning of EBS deployed on Shared File System
o Hot and Cold mode cloning
o Quantifiable reduction in clone time for the entire EBS system
This solution would be leveraging EM grid Control’s DB provisioning pack’s clone utilities, that are quite advanced and support cloning of DB with Data Guard.
The recommendation is to start trialing AMP version 3.0, making the purchase and implementing within the Enterprise. As we release the new version of AMP (release 3.0.1), Customer would be in a better position to quickly implement the latest features
Can anyone let me know if the solution A suggested will work.
Rgds,
Thiru

Oracle EBS R12 Advice

Hey Community,
I have 2 years of experience as an Apps DBA. I recently took a new job working under a consultant as jr. apps dba. Well the consultant was fired and well now I'm the only dba. So far things are great and I'm really enjoying this challenge. I have been studying my behind off daily to catch up on a lot of stuff that is new to me. I had a few questions I would like to ask and get advice from experts here.
One of my questions are what are some daily tasks I need to do as an apps dba? This is a fairly new shop and right now, there isn't any procedures on doing much. I am creating procedures now. Right now I just check to make sure the applications are up, if they are down, I go from there. We have a core dba so I don't have to do much on the database side. I need info for the application side.
Also, I don't know RAC but will have to learn it. I do have my own home environment. I know how to install Oracle EBS finally. At the moment, I am upgrading my database to 11.2.0.3 and after that I will upgrade my applications to 12.1.3 and then the latest version. After I complete these tasks, I am going to take time to learn as much as I can about RAC, then I will do my own implementation of RAC. I will then need to install Oracle EBS on RAC (Not sure how to do that yet) I also need to learn to clone on RAC, Patch on RAC and how to maintain EBS on RAC. If you all could give me any documentation, videos, or anything else I can study it would be greatly appreciated.
Also do you all have any advice for me that will help me rise to the challenge. I know its a huge one but its one I believe I can do as long as I put in much hard work and dedication. Any advice would be appreciated. Thanks

Daily tasks/checklist for Apps DBAs -- https://community.oracle.com/search.jspa?q=apps+dba+daily+tasks
How to become an Apps DBA -- https://community.oracle.com/search.jspa?q=how+to+become+and+apps+dba
RAC Installation & Cloning
Oracle E-Business Suite Release 12 High Availability Documentation Roadmap(Doc ID 1072636.1)
Using Oracle 11g Release 2 Real Application Clusters and Automatic storage management with Oracle E-Business Suite Release 12.2(Doc ID 1453213.1)
Using Oracle 12c Release 1 (12.1) Real Application Clusters with Oracle E-Business Suite Release R12.2(Doc ID 1626606.1
Rapid Clone Documentation Resources For Release 11i and 12(Doc ID 799735.1)
Certified RAC Scenarios for E-Business Suite Cloning(Doc ID 783188.1)
Cloning Oracle E-Business Suite Release 12.2 RAC Enabled Systems with Rapid Clone(Doc ID 1679270.1)
Cloning Oracle E-Business Suite Release 12 RAC-Enabled Systems with Rapid Clone(Doc ID 559518.1)
Troubleshooting RAC RapidClone issues with Oracle Applications R12(Doc ID 1303962.1)
Thanks,
Hussein

Risks associated with database refresh.

Hi experts,
I need to clarify a doubt .I have a cloned SAP BW system (from another system i.e SAn to SAN copy)and then after few months after the first clone I need to refresh the database(Oracle 10 G).The reason being I will have some changes in data at the source system from where it was copied earlier.I shall be applying the application changes by tracking the transport requests(from the original system).
I need to clarify if we don't refresh the whole system again by SAN to SAN copy and then do a database refresh will there be any problem .Is there any risk associated with it.
Will the requests be available to me on the monitor with the new data or there will be some issues.
A quick response shall be very useful.
Shailja.

Hello,
Orders for Production , Maintenance, Deliveries, Transfer Order etc. are created according to the factory calendar .
You must be sure that all operations can be carried out in the seven days of the week (e.g. deliveries), because SAP can be scheduling aTransfer Order for a Sunday and somebody can be calling you for fixing the issue!
The normal case is that some operations can take place in the weekend (Production, Maintenance) but other Logistic Operations ( Deliveries) are done only from Mo to Fr. If this is your case, I would create an additional seven days calendar and assign it to the work centers in Production and maintenance, but the Plant would remain linked to the old five days calendar
Hope this can solve your issue.
Dario

INSTEAD of Trigger View for an Oracle EBS New form development

Hello,
I am developing a new EBS form based on a database view.
This form is an EBS form will run in an 11.5.10.2 environment and developed using 6i.
The form has one data block that is based on the view. The view is joined and based on following tables.
Hz_Parties Hp,
Hz_Cust_Accounts
Hz_Cust_Acct_Sites_All
Hz_Party_Sites
Hz_Locations
Ra_Salesreps_All
Hz_Cust_Site_Uses_All
Ar_Vat_Tax_All
xx_custom_table t
The view is inherently not updatable. Therefore, I am thinking to write an INSTEAD OF trigger on the view. The question. The form which is based on the view is require to update Oracle EBS tables mentioned above. As you know, there are APIs available to update above tables.
Typically, you would write API in a program unit in the form and call from triggers. But here the form is based on the view. And to support DMLs on the view, I HAVE TO write INSTEAD of trigger(or that is the only way i know) so the question is:
1. Do I write these APIs under INSTEAD of triggers?
2. Or, I write these API in the form triggers and write DML referencing OLD and NEW values in INSTEAD of trigger? Where, these OLD and NEW values will refer on above tables.
Please advise.
And lastly, Do I have to write an INSTEAD of trigger? The USER_UPDATEABLE_COLUMNS view for this table shows no columns are updateable at the moment
Thanks,
A

As you know, there are APIs available to update above tables.No, I don't B-) You'd better ask this in the eBusiness Suite form, as this is very EBS, not Forms, specific.
In general, I would say that in this case you can use the EBS API's in the instead of trigger, not in the form.
Or you can base the form on stored procedures, not directly on the view.

Oracle ILM assistant for Oracle EBS R12.1 application with 11.1.0.7 DB

Oracle ILM through its ILM Agent, which is a database component provides option for data archiving.
Need to know how ILM agent can be used against Oracle EBS R12 and the options available:
a. Does ILM assistant map to industry Compliance requirements and can we add or modify based on additional Client requirements
b. Is this configured for all components and are the business rules (default) taken care in terms of archiving related data, if not what are the options available
c. What are the options to archive data
i. On Same and archive database
ii. Other RDBMS (mysql, or open source database)
d. Access to archived data
i. Is archive data available from the existing application or only from backend database
ii. Does ILM assistant provide options to access archived data (same Oracle RDBMS or heterogeneous database)
e. Retention options
i. Does ILM assistant provide multi tier retention options for archived data for different range (# of years)
Edited by: user9031099 on May 9, 2013 11:00 PM
Any update on my query please...?

Limits the Preferred Read-Write Tablespace to only 1 where as in Oracle EBS we would require multiple tablespaces to be Preferred Read Write. Can we extend the functionality of ILM assistant to have multiple Read-Write tablespaces...?

Oracle EBS R12 for Windows Installation Error

Hi,
I tried to install Oracle EBS R12 for Windows. My installation had failed. Listed below is the log information. On the Second log file (further down below) it is saying "TNS:no listener". Please help.
FIRST LOG FILE:Log Path: C:\Orale\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\06132024
C:\Users\Bing\AppData\Local\Temp>if 0 == 0 goto :TCFG_OK
C:\Users\Bing\AppData\Local\Temp>echo "runProcess_4"
"runProcess_4"
C:\Users\Bing\AppData\Local\Temp>REM
C:\Users\Bing\AppData\Local\Temp>REM Perform the instance configuration
C:\Users\Bing\AppData\Local\Temp>REM
C:\Users\Bing\AppData\Local\Temp>echo "Statusstring Configuring Database Technology Stack"
"Statusstring Configuring Database Technology Stack"
C:\Users\Bing\AppData\Local\Temp>(echo APPS & echo APPS ) | J:\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -DCONTEXT_VALIDATED=true -mx512M -classpath .;J:\StageR12\startCD\Disk1\rapidwiz\jlib\java;J:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyDBTechStack -e C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_bing-pc.xml -stage J:\StageR12\startCD\Disk1\rapidwiz -showProgress -phase cfg -nopromptmsg
Log file located at C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\ApplyDBTechStack_06132042.log
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed RC-00110: Fatal: Error occurred while relinking of ApplyDBTechStack
C:\Users\Bing\AppData\Local\Temp>if 1 == 0 goto :ICFG_OK
C:\Users\Bing\AppData\Local\Temp>echo "Cannot execute configure of database ORACLE_HOME using RapidClone\n";
"Cannot execute configure of database ORACLE_HOME using RapidClone\n";
C:\Users\Bing\AppData\Local\Temp>if "" == "TRUE" goto :ICFG_OK
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
SECOND LOG FILEC::\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\ApplyDBTechStack_06132042.log
LOCAL : VIS
ORACLE_SID :
PATH : C:\Oracle\VIS\db\tech_st\11.1.0\perl\5.8.3\bin\MSWin32-x86-multi-thread\;C:\oracle\VIS\db\tech_st\11.1.0\bin;C:\oracle\VIS\db\tech_st\11.1.0\appsutil\jre\bin;C:\oracle\VIS\db\tech_st\11.1.0\appsutil\jre\bin;J:\StageR12\startCD\Disk1\rapidwiz\unzip\NT;C:\oracle\VIS\db\tech_st\11.1.0\bin;C:\Program Files (x86)\Oracle\jre\1.3.1\bin;C:\Perl\bin\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\hp\bin\Python
LD_LIBRARY_PATH : C:\oracle\VIS\db\tech_st\11.1.0\lib
ECHO is off.
ECHO is off.
The log information will be written to
"C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\addlnctl.txt"
ECHO is off.
ECHO is off.
Starting listener process VIS ...
ECHO is off.
LSNRCTL for 32-bit Windows: Version 11.1.0.7.0 - Production on 13-JUN-2009 20:43:12
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=bing-pc.horse.com)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL for 32-bit Windows: Version 11.1.0.7.0 - Production on 13-JUN-2009 20:43:14
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
addlnctl.cmd exiting with status 1
OpenSCManager failed
adsvdlsn.cmd exiting with status 1002
ERRORCODE = 1002 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Setup Phase
Running Setup Process 5 of 6 for AppsUtil
Executing script in InstantiateFile:
C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc\afmkinit_inst.cmd
script returned:
Sat 06/13/2009
08:43 PM
"afmkinit_inst.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Setup Phase
Running Setup Process 6 of 6 for AppsUtil
Executing script in InstantiateFile:
C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc\afmkinit.cmd
script returned:
Sat 06/13/2009
08:43 PM
1 file(s) copied.
1 file(s) copied.
1 file(s) copied.
"afmkinit.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Skipping Profile Phase
Skipping Apply Phase
adcvmlog.xml renamed to C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\adcvmlog.xml.06132042
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc
adsvdlsn.cmd INSTE8_SETUP 1002
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDBTechStack
Thanks in advanced,
Edited by: amorsolo on Jun 15, 2009 9:12 PM

Hi user3726038,
I have seen posting about the installation of EBS R12/i11 saying it does not work with Windows Vista (64 bit). I went ahead and tried it anyway to see what kind of errors I get and to confirm if the errors I get are consistent with other people using Windows Vista. FYI, my installation went as far as 99% complete of step 2 of 5 before it errored out. I checked and noticed that many components of EBS have been installed with status equal zero which is good.
When I got the "TNS-12541: TNS: no listener", I went to Windows services, located the Oracle TNS service that was created by the EBS installation and tried to start it. Then I got this error: "error 1053 the service did not respond to the start or control request in a timely fashion". I googled the error message and the resolution is: "To resolve this problem, obtain the latest service pack for the Microsoft .NET Framework 1.1.". I have tried this but it does not work because my Windows Vista uses a higher version of .Net Framework 1.1. I have done more research but to no avail. However, it is fun as I learn many things about the EBS intallation and Windows Vista.
By the way, these are the steps when I run the rapidwiz on Windows Vista. Click on Start => Click on command prompt => right click on command Prompt => select run as administrator => CD to the path where the rapidwiz reside. Somehow if I use the regular command prompt the installation will die on step 1 of 5 even when I log in as administrator.
In your case you are using Windows 2k3. Make sure your OS is not 64 bit. Whenever you get an error and it does not say much, google it to see the resolution and make sure you read the Installation Guide. Hope this helps.

Oracle eBS clone : only database refresh

Similar Messages

Maybe you are looking for