Oracle ebs installation on windows 2008 R2

Hi Hussein,
I am doing oracle EBS installation on windows 2008. As per installation doc below are the pre-requisite
The Prerequisites Software are:
1.Chose and Operating System windows 2008 (32 bit):
Select the Windows Operating system and install it. After installed OS successfully need to change DNS entries or Active Directories as per your environment.
2.Install the Microsoft Visual C++ 2008 software.
See the post for installation of – Microsoft Visual C++ 2008
3.Install the MKS Toolkit – Versions 9.0 (Patch 3 or higher):
See the post for installation of – MKS Toolkit.
I wanted to know that is there any alternate of MKS tool kit as I am unable to get it .
Regards,
Raj

hi Raj
3.Install the MKS Toolkit – Versions 9.0 (Patch 3 or higher):
See the post for installation of – MKS Toolkit.
I wanted to know that is there any alternate of MKS tool kit as I am unable to get it .
Yes go for cygwin
please see
Using Cygwin to Maintain Oracle E-Business Suite Release 12 on Windows[Article ID 414992.1]
Oracle E-Business Suite R12 Installation Steps on Windows XP
;) AppsMAstI :)
Sharing is Caring

Similar Messages

Oracle 10g installation on Windows 2008 VMware

Hi everybody,
hope you can help me with that issue; I try to install a ECC 6.0 test-system with Oracle 10g on a Windows 2008 VMware instance.
I am getting a strange error when executing sapserver.cmd when I try to install the Oracle software; the Oracle Universal Installer 10.2 is aborting at the very beginning with an error popup with following content. First I enter the Drive letter for installation and SID and then OUI trys to start...
The program was not closed properly. An internal error occured. Please provide Oracle support with following datas:
"unknown"
"unknown"
"unknown"
Any ideas? I did not find anything in Metalink or on the SAP Marketplace. And I am aware that Oracle is not official supported on VMWare; on Windows 2003 I did not occur any similar problems.
kind regards
Philipp

The OUI doesn´t work (yet) on Windows 2008, you will need to wait for the OUI 10.2.0.4.
Markus

Oracle EBS R12 for Windows Installation Error

Hi,
I tried to install Oracle EBS R12 for Windows. My installation had failed. Listed below is the log information. On the Second log file (further down below) it is saying "TNS:no listener". Please help.
FIRST LOG FILE:Log Path: C:\Orale\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\06132024
C:\Users\Bing\AppData\Local\Temp>if 0 == 0 goto :TCFG_OK
C:\Users\Bing\AppData\Local\Temp>echo "runProcess_4"
"runProcess_4"
C:\Users\Bing\AppData\Local\Temp>REM
C:\Users\Bing\AppData\Local\Temp>REM Perform the instance configuration
C:\Users\Bing\AppData\Local\Temp>REM
C:\Users\Bing\AppData\Local\Temp>echo "Statusstring Configuring Database Technology Stack"
"Statusstring Configuring Database Technology Stack"
C:\Users\Bing\AppData\Local\Temp>(echo APPS & echo APPS ) | J:\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -DCONTEXT_VALIDATED=true -mx512M -classpath .;J:\StageR12\startCD\Disk1\rapidwiz\jlib\java;J:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyDBTechStack -e C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_bing-pc.xml -stage J:\StageR12\startCD\Disk1\rapidwiz -showProgress -phase cfg -nopromptmsg
Log file located at C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\ApplyDBTechStack_06132042.log
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed RC-00110: Fatal: Error occurred while relinking of ApplyDBTechStack
C:\Users\Bing\AppData\Local\Temp>if 1 == 0 goto :ICFG_OK
C:\Users\Bing\AppData\Local\Temp>echo "Cannot execute configure of database ORACLE_HOME using RapidClone\n";
"Cannot execute configure of database ORACLE_HOME using RapidClone\n";
C:\Users\Bing\AppData\Local\Temp>if "" == "TRUE" goto :ICFG_OK
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
SECOND LOG FILEC::\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\ApplyDBTechStack_06132042.log
LOCAL : VIS
ORACLE_SID :
PATH : C:\Oracle\VIS\db\tech_st\11.1.0\perl\5.8.3\bin\MSWin32-x86-multi-thread\;C:\oracle\VIS\db\tech_st\11.1.0\bin;C:\oracle\VIS\db\tech_st\11.1.0\appsutil\jre\bin;C:\oracle\VIS\db\tech_st\11.1.0\appsutil\jre\bin;J:\StageR12\startCD\Disk1\rapidwiz\unzip\NT;C:\oracle\VIS\db\tech_st\11.1.0\bin;C:\Program Files (x86)\Oracle\jre\1.3.1\bin;C:\Perl\bin\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\hp\bin\Python
LD_LIBRARY_PATH : C:\oracle\VIS\db\tech_st\11.1.0\lib
ECHO is off.
ECHO is off.
The log information will be written to
"C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\addlnctl.txt"
ECHO is off.
ECHO is off.
Starting listener process VIS ...
ECHO is off.
LSNRCTL for 32-bit Windows: Version 11.1.0.7.0 - Production on 13-JUN-2009 20:43:12
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=bing-pc.horse.com)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL for 32-bit Windows: Version 11.1.0.7.0 - Production on 13-JUN-2009 20:43:14
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
addlnctl.cmd exiting with status 1
OpenSCManager failed
adsvdlsn.cmd exiting with status 1002
ERRORCODE = 1002 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Setup Phase
Running Setup Process 5 of 6 for AppsUtil
Executing script in InstantiateFile:
C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc\afmkinit_inst.cmd
script returned:
Sat 06/13/2009
08:43 PM
"afmkinit_inst.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Setup Phase
Running Setup Process 6 of 6 for AppsUtil
Executing script in InstantiateFile:
C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc\afmkinit.cmd
script returned:
Sat 06/13/2009
08:43 PM
1 file(s) copied.
1 file(s) copied.
1 file(s) copied.
"afmkinit.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Skipping Profile Phase
Skipping Apply Phase
adcvmlog.xml renamed to C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\adcvmlog.xml.06132042
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc
adsvdlsn.cmd INSTE8_SETUP 1002
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDBTechStack
Thanks in advanced,
Edited by: amorsolo on Jun 15, 2009 9:12 PM

Hi user3726038,
I have seen posting about the installation of EBS R12/i11 saying it does not work with Windows Vista (64 bit). I went ahead and tried it anyway to see what kind of errors I get and to confirm if the errors I get are consistent with other people using Windows Vista. FYI, my installation went as far as 99% complete of step 2 of 5 before it errored out. I checked and noticed that many components of EBS have been installed with status equal zero which is good.
When I got the "TNS-12541: TNS: no listener", I went to Windows services, located the Oracle TNS service that was created by the EBS installation and tried to start it. Then I got this error: "error 1053 the service did not respond to the start or control request in a timely fashion". I googled the error message and the resolution is: "To resolve this problem, obtain the latest service pack for the Microsoft .NET Framework 1.1.". I have tried this but it does not work because my Windows Vista uses a higher version of .Net Framework 1.1. I have done more research but to no avail. However, it is fun as I learn many things about the EBS intallation and Windows Vista.
By the way, these are the steps when I run the rapidwiz on Windows Vista. Click on Start => Click on command prompt => right click on command Prompt => select run as administrator => CD to the path where the rapidwiz reside. Somehow if I use the regular command prompt the installation will die on step 1 of 5 even when I log in as administrator.
In your case you are using Windows 2k3. Make sure your OS is not 64 bit. Whenever you get an error and it does not say much, google it to see the resolution and make sure you read the Installation Guide. Hope this helps.

EBS software or installer for windows 2008 R2 84 bit

Not able to find the oracle EBS software or installer for windows 2008 R2 64 bit operating system. Let me know if Oracle EBS media is available for windows 2008 R2 64bit operating system

Hi;
The Oracle E-Business Suite Rapid Install media for Windows presently only supports an installation on 32-bit Microsoft Windows Server (2003, 2008).
Please see:
Migrating Oracle E-Business Suite R12 to Microsoft Windows Server 2008 R2 [ID 1188535.1]
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server (32-bit) [ID 761567.1]
Regard
Helios

Oracle 11g RAC installation on windows 2008 64 bit

Hello Everyone,
can i get some details regarding Oracle 11g RAC installation on windows 2008,
minimum Hardware Requirement
Will windows support ASM
Can i get a documentation regarding the RAC installation on windows. we were planning to have 11.5 on windows 2008.
please send me some docs regarding os requirements, installation and ASM details.
Thank you

Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC , Clusterware 11g R2 64 Bit.

Best practice for installation oracle 11g rac on windows 2008 server x64

hello!
can somebody tell me a good book or an other kind of literature regarding "best practice for installation oracle 11g rac on windows 2008 server x64"? thx in advance!
best regards,
christian

Hi Christian,
Check this on MOS
*RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows) [ID 811271.1]*
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=811271.1
DOC Modified: 14-DEC-2010
Regards,
Levi Pereira

Oracle RAC 11g on Windows 2008 64 bit - blue screen error on both nodes

Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull and crs_state -t shows all services in two nodes are online.
When executed a select query with 100 sessions( For performance evaluation using Transaction generator ) ,the machine got crashed and blue screen is appeared on two nodes. I restrated the machines and and starts the same evaluation ,bt the same bug is repeating.
Can anyone suggest a solution to solve this issue? Is our hardware is not sufficient ? Shall we need to perform any
specific settings in Oracle RAC setup for performance evaluations?
Is our settings for load balancing is not enough? ( We added "Load Balancing= On" on tnsnames.ora on client for load
balancing)
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC 11g , Clusterware 11g R2 , ASM with 5 raw disk ( 1- votting disk ,1- ocr files and 3 disk files)
Edited by: user2033016 on Jun 29, 2011 10:02 PM

user2033016 wrote:
Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC , Clusterware 11g R2 64 Bit.i guess you have installed/configured RAC using VMware. i guess, the problem is with your RAM size. how much disk space and RAM size you have allocated for each machine?
which documentation you have followed?

Issue with OBIEE 11.1.1.5.0 Installation on Windows 2008 64-bit machine

Hi
I'm following the below steps to install OBIEE 11.1.1.5.0 Installation on Windows 2008 64-bit machine. However the installation is unsuccessful as it fails at the "Domain Creation" step. It would be very helpful and greatly appreciated if any workaround is provided. Thanks!
1.JRockit Windows 64 bit Version jrockit-jdk1.6.0_24-R28.1.3-4.0.1-windows-x64
2. Oracle 11G Database
3. RCU Installation
4. WebLogic 10.3.5.0 Generic Version
5. Weblogic patch
6. OBIEE 11G 64 bit version (11.1.1.5). Software only
7. Execute Configure.bat in :\Middleware\Oracle_BI1\bin
Thanks

Hi,
Kindly refer my blog link:
http://obieeelegant.blogspot.com/2011/10/windows-7-home-premium-edition-is-not.html
from exp..with obiee11g installation with win 7 64bit i have face so many issues..
http://obieeelegant.blogspot.com/2011/09/obiee-11g-111150-software-only.html
obiee11.1.1.5.0(Software Only Install) windows 7 64bit Installation Error
OBIEE11g software only install configuration get hangover on win 2008 64
==========
Note: some time it works with simple install option then rebooting mechine/restarting mechine it's not working.then i had OWC and discussed with MY Oracle Support team...they confirmed it's not support. please refer the certification matrix excel file in my blog link
Hope it's clear...
Thanks
Deva
Edited by: Devarasu on Nov 25, 2011 11:18 AM

Domain migration of Oracle RAC nodes on windows 2008

Hello masters,
We are planning to migrate servers from old domain to a new domain due to company name change. That is, our DB servers named like db-node-x.old-domain.com will be migrated to db-node-x.new-domain.com. The servers are all on Windows 2008 R2 and Oracle RAC 11g2. As dba, i have no idea about what will happen to DBs. Please let me know any possible solutions?
Thanks in advance.

user2033016 wrote:
Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC , Clusterware 11g R2 64 Bit.i guess you have installed/configured RAC using VMware. i guess, the problem is with your RAM size. how much disk space and RAM size you have allocated for each machine?
which documentation you have followed?

Does SAP ECC 6.0 run on Oracle 11.2 in Windows 2008 server ( win NT 6.1) ?

HI all,
Does SAP ECC 6.0 run on Oracle 11.2 in Windows 2008 server ( win NT 6.1) ?
Thanks in Advance
Sapsanthose

sapsanthose wrote:
HI all,
>
>
>
> Does SAP ECC 6.0 run on Oracle 11.2 in Windows 2008 server ( win NT 6.1) ?
>
>
> Thanks in Advance
>
> Sapsanthose
Hi,
Yes, it does. Check the service.sap.com/pam
Best regards,
Orkun Gedik

Oracle 9i installation on Windows 2003 Cluster

Hi
I Need any good documentation for Oracle 9i installation on Windows 2003 Cluster.

Complete Guide is here
http://download-uk.oracle.com/docs/cd/B19306_01/install.102/b14207/toc.htm

Is Oracle EBS compatible with Windows 7 Home Premium 64-bit OS?

Hi,
Is Oracle EBS compatible with Windows 7 Home Premium 64-bit OS? If yes, how come I don't find the appropriate e-delivery download on edelivery? Thanks.
Ari

Hi Ari;
Which Windows OS is R12 completely compatible with? All tiers? For all your certifed question please refer Oracle certification matrix:
http://www.oracle.com/technology/support/metalink/index.html
My Oracle Support Certification Information -> Oracle E-Business Suite -> Applications Technology -> Lifecycle Management -> Application Install -> R12 -> 12 or 12.1 -> Tier -> Database&application -> plarform Windows
Regard
Helios

Is Oracle 10g compatible with windows 2008?

Hi All,
Is Oracle 10g compatible with windows 2008?
What are the OS's oracle 10g compatible with? Is it compatible with VMware environment too?
Regards
Arun

user12273523 wrote:
Hi All,
Is Oracle 10g compatible with windows 2008? Yes
What are the OS's oracle 10g compatible with? Is it compatible with VMware environment too?please check
http://www.oracle.com/technology/software/products/database/index.html
Regards
Rajesh

Assistance needed during Oracle 11G R2 client installations in Windows 2008

Hi,
I am installing Oracle 11G R2 client in Windows 2008 R2 enterprise server. It has JR6 installed. But whenever I am launching the installer from OUI, I am getting the error 'Java: “Could not find the main class. Program will exit” and the installation is getting terminated. Any inputs/suggestions will be great for me.
Thanks in advance.

Hi,
are you able to run java manually? I.e. java --help in the cmd? Are your environment variables (JAVA_HOME) set properly?

IDES ERP 6.0 incl. EHP5 Installation on Windows 2008(R2) , Oracle 11g

Dear Team
Is the installaiton of IDES ERP 6.0 incl. EHP5 possible on Windows 2008(R2) and Oracle 11g?
Thanks & Regards
Lakshmi

Hi,
You can check for this information at https://service.sap.com/pam
PS: This is the not the right forum for this question.
Regards,
Vishnu

Oracle ebs installation on windows 2008 R2

Similar Messages

Maybe you are looking for