Oracle EBS is patehtically working on VM Ware although it has same specs as of physical machine.

Hi Everyone,
We are running Oracle EBS on Physical machine having specs as follows:
DB
X2 Quad Core Xeon 2.4 GHz
32 GB RAM
x2 146GB SAS Drive with RAID-1 for OS
SAN HDD x10 450GB SAS 15K i.e. 4.0TB but RAID-5 implemented (2.3TB allotted to DB)
x4 NIC but 1 NIC used 10/100/1000
Apps
X2 Quad Core Xeon 2.4 GHz
32 GB RAM
x2 146GB SAS Drive with RAID-1 for OS
SAN HDD x10 450GB SAS 15K i.e. 4.0TB but RAID-5 implemented (500GB allotted to Apps)
x4 NIC but 1 NIC used 10/100/1000
We are facing serious issues when migrated Oracle EBS on vmware infrastructure.
Issue are related to high I/Os and high CPU usage hence performance of the application gets down badly whereas same application on physical machine working fine. We would also like to share physical machine is with lesser specification.
Following are specs of Oracle & VM Ware machine;
Oracle EBS is with 11g v1.1.07 Database and R12 v12.1.3 Apps
OS for above applications is RED HAT Enterprise Linux 5.5 64bit
ESXi version 5.5.0 build 1331820
Hope to have a positive reply.

Hi Linjo,
Thank you for your response.
VM MAchine specs are as follows:
(There are two servers, everything is same except local storage.)
Both servers are HP DL 585 G7 server with;
Quad AMD Opteron Processor 2.5GHz
12GB RAM
x8 NIC
Local-1 HDD x8 600GB SAS 10K i.e. 5.4TB, RAID-5 implemented
Local-2 HDD x10 900GB SAS 10K i.e. 7.2TB, RAID-5 implemented
SAN
SAN-1 HDD x6 600GB SAS 15K i.e. 2.4TB but RAID-5 implemented
SAN-2 HDD x6 2TB SAS 7.2K i.e. 8TB but RAID-5 implemented
Yes, it is a shared environment, like we have other machines are running on VM but we have dedicated cores & memory for EBS Apps & DB servers.

Similar Messages

Oracle EBS forms not working after dataguard switchover.

Hi Guys,
I have followed steps in document 1070033.1 to configure a data guard for R12 E-business suite and it's working properly now. i tried to perform a switchover to test the data guard, the switchover for the database tier was successful also i was able to configure and start the apps tier with no errors but when logging into the application and trying to run any form an error message is displayed saying "unable to communicate with run time process". the result of "odopmnctl status" show that all OC4Js are running and active. no errors exist in the log files. so why are the forms not running
omari

hi Helios,
The error that raises up when calling the form is "FRM-92101". the application.log file shows the error stack below. your help will be appreciated.-
formsweb: Forms session <2> exception stack trace:
oracle.forms.engine.RunformException: Forms session <2> failed during startup: no response from runtime process
at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:736)
regards,
omari

Oracle 6i Report Not working

Hi,
I have a Oracle Apps - 6i Report works fine with one instance and the same report does not fetch any records in the other instance..
Even its not printing the messages in the before report trigger, when i query from the backed it fetches records. This is really strange..
Please any one help me on this.
Thanks,
Genoo

It doesn't look like this has anything to do with Reports itself. You'd better ask this in the Oracle Apps forum.

Oracle EBS 11.5.10.2 not working in IE 9 on Windows 7 64-Bit

Hi,
I upgraded our Oracle EBS(11.5.10) to 11.5.10.2+DB 11g R2+Sun JRE.
Some users having IE 9 on Windows 7 (64-Bit) are not able to access the Forms based products, though this combination is mentioned in Note: 290807.1.
Please let me know if any work around is there for this issue. Users don't want to use FireFox.
Rgds,
Thiru

Please post the complete error message as requested above.
Also, check Apache and the application.log file for any errors.
In Steven Chan blog its mentioned that the following is supported for R11i.
32-bit Windows 7, 32-bit browsers, 32-bit JRE
64-bit Windows 7, 32-bit browsers, 32-bit JRE
Our users are having 64-Bit Windows 7 and IE 9. Since I didn't know if the IE 9 was 32-bit or 64-Bit , I removed the IE 9.
64-Bit Windows 7 is not allowing 32-Bit IE to be installed.You do need to install a 32-bit of IE9.
I have all the pre-requisites mentioned in the blog.Please post the complete error message.
Thanks,
Hussein

Oracle EBS R12.0.0.4 - Work Load Management

Dear All,
I am working as a System Adminsitrator for an educational institution. Oflately my institution has become a oracle education partner for Oracle EBS – Finance. Unfortunetly we don’t have a system adminstrator who is qualified to adminster Oracle EBS. So I had to install and maintain Oracle EBS 12.0.0.4. I have successfully installed Oracle R12.0.0.4 on a Windows 2003 Server. The installation was successful and EBS Server is working fine. But there is a problem, we have around 40 users/students and when all the users try to login the whole server becomes slow and at the end after above 15-18 users have logged in I get any of the following errors:
1.     500 Internal Error
2.     TNS Listerner could not hand off client connection
3.     A Java expection has occurred (not particular about the error message)
4.     After Java Applet – Forms is initialized I get an error saying the username VIS and password VIS is wrong.
5.     The Server does not display any page and it becomes time out.
The Configuration of the server is Intel Dual Core 1.8Ghz, 2 GB DDR2 RAM, 750 GB SATA HDD, IBM x3200 Series Server.
Please suggest me a way out so that all the students can work with EBS at the same time. At the beginning under the Application Dashboard, Concurrent Manager is shown with an x, but after some time say about 10-15 mins after booting, the Dashboard show CM as working with a tick in it. Will Increasing RAM solve my problem. Or is there something I need to do.
Thanks
Sri
Pl. Note: I am not well versed in all procedure, I am a advanced user in networking, OS Setup, Windows 2003 Server. But a new comer to oracle DBMS & APPS. I will be able to copeup with whatever u peope say me but knidly try to keep the language as simple as possible.

Hi;
Actualy you define your problem and your answer same time. Your user has those error coz your server cant handle whit request. Its mean your server source not enough for those users number and also for r12.
If possible first increase your RAM, I belive it could be helpful for beginning, than you should watch your system.
You need resizing of your server or if possible to move new more powerfull server.
For sizing you can check below threads:
sizing
Re: Does anyone know of hardware sizing tool for 11i/R12?
Hardware requirements for Oracle APPS
Does anyone know of hardware sizing tool for 11i/R12?
Regard
Helios

Oracle EBS drill link targets for EAM Work Order and Asset

Hi All - I am running Oracle EBS 12.1.3 and OBIEE 11g and I'm trying to link from OBIEE to EBS, but struggling to find the target functions / parameters to provide a direct URL link to EBS EAM Work Order and Asset. I have successfully linked to a Purchase Order View page, I would like to find the similar for EAM Asset and Work Order.
I can see some parameters in WorkOrderDetailsPGCO but can't seem to work out how to get to the page from a URL.
For reference MOS Note 555254.1 has some details, but not for EAM.
Has anyone provided users in any reporting system with a link to EAM Work Order or Asset page and if so how were the links generated?
Thanks,
Gareth

I am giving this a bump as I really need some help with this. Is I run the SQL with TOAD or SQLPlus it seems to consistently runs fine, The problem seems to only be from APEX. I think it has do to with the non-persistent state.

Difference between Oracle Fussion Middle ware and Oracle EBS

Hi All,
As i know Oracle Fussion Middle ware and Oracle EBS both are Oracle ERPs can anyone explain difference of these and technologies between them and explain in detail for Oracle Fussion.
Thanks
Rehan

>
well old way of development (Forms & Reports) will be obsolete in Oracle Fusion Middleware vs Oracle EBS
>
not quite true
obsolete in fusion application but ofm has forms/reports 11 based on weblogic
>
well old way of development (Forms & Reports) will be obsolete in Oracle Fusion Middleware vs Oracle EBS, as it is based on Java, OAF and ADF.
>
not quite true
fusion application doesn't use oaf. it's ebs related technology only

PCG works only with Oracle EBS?

Hi, Does PCG work only with Oracle EBS? Does it not work with other products like Peoplesoft, SAP, Siebel?Thanks, Varsha

That's correct. PCG is only for Oracle EBS.

Is oracle ebs work with java version 7.51 ?

Hi,
is oracle ebs work with java version 7.51 ?
Thanks

Findy Nurtantio wrote:
Hi,
is oracle ebs work with java version 7.51 ?
Thanks
Yes, Java JRE 1.7.0_51 is certified with Oracle E-Business Suite -- https://blogs.oracle.com/stevenChan/entry/java_jre_1_7_08
Thanks,
Hussein

Cold Oracle EBS backup and restore doesn't work

Hi,
I did a backup using tar while the database was open and not in archive mode ( archivelog disabled ) and restored it on another machine.
OS = AIX 5.3
Oracle EBS 11.5.9
Database 9i
When i started the database I got errors.
Is there a metalink document which will help me recover the database ?
I followed the following metalinks:
Database Startup Fails with ORA-01113, ORA-01110 errors [ID 146039.1]
Common Causes and Solutions on ORA-1113 Error Found in Backup & Recovery [ID 183367.1]
However, I would like to point out that the above is applicable in case of archivelogs = enabled
My case: archivelogs = disabled
SQL> startup mount pfile=/oracle/proddb/9.2.0/dbs/initPROD.ora
ORACLE instance started.
Total System Global Area 615482512 bytes
Fixed Size 742544 bytes
Variable Size 436207616 bytes
Database Buffers 167772160 bytes
Redo Buffers 10760192 bytes
Database mounted.
SQL> SELECT V1.FILE#, NAME
FROM V$BACKUP V1, V$DATAFILE V2
WHERE V1.STATUS = 'ACTIVE' AND V1.FILE# = V2.FILE# ; 2 3
no rows selected
SQL> recover database using backup controlfile until cancel;
ORA-00279: change 3368247542 generated at 02/10/2013 03:07:21 needed for thread
1
ORA-00289: suggestion : /oracle/proddb/9.2.0/dbs/arch1_637.dbf
ORA-00280: change 3368247542 for thread 1 is in sequence #637
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
cancel
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/oracle/proddata/system01.dbf'
ORA-01112: media recovery not started
SQL> recover database using backup controlfile until cancel;
ORA-00279: change 3368247542 generated at 02/10/2013 03:07:21 needed for thread
1
ORA-00289: suggestion : /oracle/proddb/9.2.0/dbs/arch1_637.dbf
ORA-00280: change 3368247542 for thread 1 is in sequence #637
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
ORA-00308: cannot open archived log '/oracle/proddb/9.2.0/dbs/arch1_637.dbf'
ORA-27037: unable to obtain file status
IBM AIX RISC System/6000 Error: 2: No such file or directory
Additional information: 3
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/oracle/proddata/system01.dbf'
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/oracle/proddata/system01.dbf'
SQL> select HXFIL File_num,substr(HXFNM,1,40) File_name,FHTYP Type,HXERR Validity,
FHSCN SCN, FHTNM TABLESPACE_NAME,FHSTA status ,FHRBA_SEQ Sequence
from X$KCVFH;
419 rows selected.

981553 wrote:
I understand that Hot backups cannot be done with noarchivelog and data will be inconsistent.
However, shouldn't the Database be able to recover whatever data is in there in the datafiles and startup normally. From where should it be recoverd, only if we store the data changes in a separate files. These files are called archive logs. The archive logs will be generated when you enable archive log.
This is my question and concern. I searched for Metalink and couldn't find anything on it.
I want to startup the database with whatever Data is present there after the backup. Any solutions for such a scenario ?
ORA-00279: change 3368247542 generated at 02/10/2013 03:07:21 needed for thread
1
ORA-00289: suggestion : /oracle/proddb/9.2.0/dbs/arch1_637.dbf
ORA-00280: change 3368247542 for thread 1 is in sequence #637
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}When it asks for change number "637" and if you are lucky enough that the redo log file with this sequence is not over written then that redo log file can be given as input when it asks as above.
But again, all these tries are for nothing. At the end of the day if your database is in no archive log mode the reliable backup is only the one taken using cold backup method. i.e. by shutting down the database.
Thanks

Getting 404 error when trying to login to Oracle EBS page

Hi,
I had installed Oracle EBS 12.0.4 last year and everything was running fine until last week. Last week, we suddenly started seeing this issue - when trying to login to the Oracle EBS page, we are getting the 404 page not found error.
I have EBS installed on 2 VMs (virtual machines) - one VM has the application server and other VM has the database server. I logged on to the aplpication server to do some debugging and noticed 2 things ->
1.The Oracle Fullfillment service was not running. I started it, it was up for some time but then it stopped on its own. This happens everytime - after successfully starting the service, it shuts down after sometime. There is nothing in the event viewer except this message "The service may have terminated abnormally, please see the log file generated by the service for more details." I checked the log file, but there is nothing significant inside the log file. Maybe I need to increase the log level. Can any one tell me how can I do that?
2. Reviver.exe was crashing intermitently on the application server. I belive reviver tries to establish the connection between the application and database server after its broken.
So I am thinking now that maybe the connection between the app server and the database server is getting broken intermittenlty and this is the root cause of all the problems.
I dont know how to verify whethe my analysis is correct or not? And it it is, how to resolved it? Is there a setting or a configuration file in which you have to specify the database server details (ip address / host name etc). Can you tell me where can I find this setting?
Or culd there be something altogether different that is causing the page not found error?
Thanks in advance,
Megha

Hussein,
The problem is partially solved - I am not getting the 404 error now. The issue was not with the netsvc file. Please see the resolution in NOTE:412980.1 (oafm,forms and oacore not starting up after IP adress change).
The OC4J services are imperative for any URL for java code. With just the Apache listener running, examples of URLS that will work are ->
http://HOST.DOMAIN:PORT/OA_MEDIA/FNDLOGOL.gif
http://HOST.DOMAIN:PORT/
Any URL for Java code will fail at this stage when OC4J services are down. For example this URL will fail: http://myHost.oracle.com:8000/OA_HTML/ServletPing.
But now, I am getting 500 Internal server error. Let me know if you kno anything about this error ->
oracle.apps.fnd.cache.CacheException at oracle.apps.fnd.cache.AppsCache.get(AppsCache.java:228) at oracle.apps.fnd.profiles.Profiles.getProfileOption(Profiles.java:1485) at oracle.apps.fnd.profiles.Profiles.getProfile(Profiles.java:354) at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfileFromDB(ExtendedProfileStore.java:211) at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfile(ExtendedProfileStore.java:171) at oracle.apps.fnd.profiles.ExtendedProfileStore.getProfile(ExtendedProfileStore.java:148) at oracle.apps.fnd.common.logging.DebugEventManager.configureUsingDatabaseValues(DebugEventManager.java:1259) at oracle.apps.fnd.common.logging.DebugEventManager.configureLogging(DebugEventManager.java:1114) at oracle.apps.fnd.common.logging.DebugEventManager.internalReinit(DebugEventManager.java:1083) at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:1050) at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:1037) at oracle.apps.fnd.common.AppsLog.reInitialize(AppsLog.java:595) at oracle.apps.fnd.common.AppsContext.initLog(AppsContext.java:941) at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:926) at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:891) at oracle.apps.fnd.common.AppsContext.<init>(AppsContext.java:751) at oracle.apps.fnd.common.WebAppsContext.<init>(WebAppsContext.java:1014) at oracle.apps.fnd.sso.Utils.getAppsContext(Utils.java:525) at oracle.apps.fnd.sso.AppsLoginRedirect.AppsSetting(AppsLoginRedirect.java:120) at oracle.apps.fnd.sso.AppsLoginRedirect.init(AppsLoginRedirect.java:170) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.loadServlet(HttpApplication.java:2231) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4617) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4541) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2821) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:740) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:299) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:187) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:230) at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:33) at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:831) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:595)Caused by: oracle.apps.jtf.base.resources.FrameworkException: Error in IAS Cache: java.lang.NullPointerException: null Connection at oracle.apps.jtf.cache.IASCacheProvider.get(IASCacheProvider.java:712) at oracle.apps.jtf.cache.CacheManager.getInternal(CacheManager.java:4802) at oracle.apps.jtf.cache.CacheManager.get(CacheManager.java:4624) at oracle.apps.fnd.cache.AppsCache.get(AppsCache.java:216) ... 33 moreCaused by: oracle.apps.jtf.base.resources.FrameworkException:
An exception occurred in the method CacheAccess.get
null
The base exception is:
null Connection at oracle.apps.jtf.base.resources.FrameworkException.convertException(FrameworkException.java:607) at oracle.apps.jtf.base.resources.FrameworkException.addException(FrameworkException.java:585) at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:66) at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:88) at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:202) at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:218) at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:249) ... 37 more

Need to connect to upgraded Oracle EBS R12 version from R11. The current ODI set up is pointing to R11, Can i use the same connection to point to R12? Please hele experts..

Need to connect to upgraded Oracle EBS R12 version from R11. The current ODI set up is pointing to R11, Can i use the same connection to point to R12? Please hele experts...
Rp

1. in physical connections part can i use the same work schema
2. Can i use same contexts created or do i need to create everything as new and then try?
Thanks,
Rp.
Hi,
As you mentioned that you just upgraded the database, so the data is same and schema is same you can connect with the same work schema.
Yes, you can use the same contexts , but need to do Reverse Engineering for your new database.
And about data server, i think you also have no need to create new data server, if hostname,sid and port etc are same as these were with R11(consult with your DBAs regarding it)

Oracle EBS 11.5.10.2 Installation Steps

Although this is by no means exhaustive or the most accurate, all contributions and/or corrections are welcome
As I attempt to reply the numerous calls and emails I have been getting, firstly sorry guys, I have been settling down at a new job, and haven’t had time to locate my implementation notes, however find below the steps I followed with a successful result.
Installing Oracle E-Business (EBS) Release 11i (version 11.5.10.2)
Linux Installation – SLES 9 Rel 1
•     Please follow these instructions – I could not have written a better set of instructions :
http://www.novell.com/coolsolutions/feature/16009.html
NOTE: Although this is written for SLES 9.1, I believe this will work for any Linux variant.
Also, make sure you have installed openmotif 2.0 or higher to make sure the forms server starts and remains running
Windows 2003 Server SP 1
Environment:
Windows 2003 Server was installed as an environment on VMWare Server (The free one).
Hardware Spec:
P4 800 Mhz CPU
2GB (Physical RAM) and 1GB (Virtual RAM)
250 GB (Physical HDD), 120GB (Virtual HDD)
DVD RW
DECLARE
At this point I have to say a few things:
1.     I have not attempted installing on any other version of Windows, so if you try with another version, I may not be able to answer your questions, although I believe it should not be any different.
2.     I would believe you can or have access to the internet and can download or find most of the resources needed.
3.     I would assume you have installed the Windows 2003 Server with SP 1, Internet Explorer and Outlook. Also, have included an IP address, a server name with its domain extensions in the host file.
4.     I would assume that you have created one group – dba , two users applmgr and oracle and included them in the dba and administrator groups
5.     I would assume that you are at least familiar with the terms and usage of abbreviations in this sort of environments.
6.     I would also assume you have reviewed and have made allowance to meet the required specification in terms of hardware (I did not attempt an installation on the USB HDD, so may not be able to help, if this applies to your situation)
BEGIN
     Prepare Environment
Download and have read the following software:
1.     Java Development Kit 1.3 (or higher version)
http://java.sun.com/downloads/index.html
2.     Active Perl – This is needed for the staging script adautostg.pl http://www.activestate.com/store/productdetail.aspx?prdGuid=81fbce82-6bd5-49bc-a915-08d58c2648ca
3.      Visual C++ - This is needed for many of the real-time code compilation
http://msdn.microsoft.com/vstudio/express/visualc/download/
4.      CYGWIN
http://www.cywin.com/setup.exe     (Free open source, never expires!)
OR
MKS Toolkit (Evaluation copy, 30 Trial or get a licence for about $500)
http://www.mkssoftware.com/eval/
This is necessary for certain unix-only available utilities required to implement/compile Oracle E-business Suite, such as which, make, cc, etc.
5.     The DVDs or downloaded zipped copy of the entire Oracle E-Business Suite software for Windows 32-Bit ( I did not attempt on a 64-Bit processor, though I believe it should not be different, but see the necessary documentation if that is your situation)
http://edelivery.oracle.com
6.     Jinitiator – This is required to run the forms on your system (Although a first attempt to view any of the form interfaces downloads and requests this be installed first) http://www.oracle.com/technology/software/htdocs/devlic.html?url=http://otn.oracle.com/software/products/developer/htdocs/jinit.htm
NOTE:
•     DO NOT Install into the default directories and do not allow spaces in file directories/path when installing the software, somehow experience has shown that the Oracle EBS does not handle spaces in file directories well, and results in untold hardship if ignored. E.g Default installation folder for an software installation may suggest C:\Program Files\ JDK 1.5, MAKE SURE you alter this to something like C:\JDK15. DO THIS FOR ALL SOFTWARE INSTALLED
•     After each software installation, please reboot the system before installing the next piece.
•     Make sure that all the paths to the bin folders for all software installed is included in the environment variables, and verify by typing path in the command prompt to display all paths listed
•     If using CYGWIN (like I did, as I could not afford a software expiring on me nor could afford $500 for a test). You may choose all the modules available, but you do not need all (it will be an overkill to have the entire unix utilities and libraries on your windows box, unless you plan on learning unix commands or into heavy development requiring a unix environment, without wanting a unix machine) MAKE SURE you choose all the library options, all the development options and that should be OK. Then confirm after the installation by typing which, cc (or gcc), make(gnumake), ls, gawk(awk), grep (egrep) (IMPORTANT:Where one of the other in brackets exists, copy and rename the copy as the alternative). As a double sure – copy all of these into C:\Bin directory.
•     If the Oracle EBS is downloaded, unzip all the files into the folder and ignore any suggestions that it will over-write other files such as the component.label files
Installation Proper
•     Run adautostg.pl – which you will find in the StartCD i.e the first file downloaded and unzipped. This will attempt to rearrange the installation files in the order in which the installation wizard – rapidwiz prefers and identifies the folders. (Saves you hand-holding the wizard by having to interact during the installation, pointing it to the relevant folders/files if not run) to create the staging area.
•     Run Rapidwiz – either by double clicking the rapidwiz.cmd in the startcd folder (this would be the one in the staging area) or from the command prompt
•     As required, point rapidwiz, to the bin folder of cygwin e.g C:\cygwin\bin (if this is as installed) in the place where it requires the MKS Toolkit
•     Pre-installation Checks – rapidwiz intelligently tests all the necessary software and requirements before installation starts. A corresponding message to each parameter suggests the opinion of the rapidwiz whilst a green tick indicates the parameter is sufficient, other indicators may need reviewing. Please make sure you resolve each issue before progressing with the installation. This may lead to a waste of time if not resolved.
•     Choose a single-node installation
(if just testing or practicing, you may also choose a multi-node if this is what you want.)
•     If all the modules are not needed (I installed all), you may have to choose which modules you require, and state where you want the modules installed.
•     Assuming all parameters are passed and installation begins, the different stages of the installation steps can be followed by the on-screen messages or log file reviews (each logfile directory will be displayed on the screen during the installation of each context).
•     Post Installation Checks – Rapidwiz does some checks after an installation, whether successful or not, and provides a report. When an installation is successful. It confirms and provides the url to login. The default username and password for the system administrator is usually sysadmin / sysadmin. You are encouraged to create another user immediately.
For all who asked, depending on how far up your hardware scales in terms of specifications, the installation may take about 3 hours (at least mine did) or more.
Login on to Oracle EBS !
The URL required for logging on to the OAM (Oracle Application Management - For the Apps DBAs) and OEBS (Oracle E-Business Suite - essentially for the Functional Implemeters/Consultants ) - The entire gamut (They are shown as hyperlinks), should be as follows;
http://hostname(servername.domainname.com):8000/
where hostname is the same as specified in your host file e.g servername.domainname.com or .whatever-u-like
and
8000 - is the default port, but you may have chosen your own port and that should be used in such a case.
N.B - The Forms server is often started when an attempt is made to access such an interface after login in to the OEBS. However, in my own case, it did not until I made sure openmotif 2.1 was installed on my SuSE Linux Enterprise Server 9.1. The windows installation started without any issues.
If all attempts fails….
You may have to try and try again by deleting all installation files and starting all the installation steps again. It will help if you know how to edit your registry settings to delete all reference to oracle e-business (not all reference to oracle though, as some odbc-related entries have been installed by Microsoft and require your registry settings to function)
Alternatively, send me your box, your mailing address and a token (money of course, and I may be able to set it all up for you) – JOKING!
CAVEAT: I will not be held responsible if anything unsavoury happens to your system in the course of you following the steps I have highlighted above either correctly or incorrectly. However, if you are successful, please sing my praises all over the forum and ask that I be rewarded by Oracle!
Olu

Hi
If anyone need the document to "How to install Oracle Applications 11i on Windows 2003" i can forward the document with screen shots with detailed steps.
Reg
Dwaraka

A SOA Exception returned from Oracle EBS ISG

Hi All,
Need your help. Maybe someone know the solution for this error.
Background
Using a webservice client to call WSDL service which is published in Oracle EBS Integrated SOA Gateway. After invoking, encounter a error.
Error
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><env:Header/><env:Body><env:Fault xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"><faultcode xmlns="">SOAP-ENV:Server</faultcode><faultstring xmlns="">FND_SOA_SERVICE_EXECUTION_ERR:oracle.apps.fnd.soa.util.SOAException: ServiceExecutionError: Error while executing the service Exception returned from JCA Service Runtime. Exception returned from JCA Service Runtime. null
    :Please see service monitor logs for full error trace</faultstring></env:Fault></env:Body></env:Envelope>
My Research
I checked SOA log, found detailed log like below.
Fri Aug 23 19:19:04 CST 2013 : oracle.apps.fnd.soa.provider.services.jca.JCAHandler.invoke : JCAClientFactoryCrated.
Fri Aug 23 19:19:04 CST 2013 : oracle.apps.fnd.soa.provider.services.jca.JCAHandler.invoke : JCAInterfaceCreated.
Fri Aug 23 19:19:04 CST 2013 : oracle.apps.fnd.soa.provider.services.jca.JCAHandler.invoke : JCAOperationCreated.
Fri Aug 23 19:19:04 CST 2013 : oracle.apps.fnd.soa.provider.services.jca.JCAHandler.invoke : buildversion in jcahanlder is 1213
Fri Aug 23 19:19:04 CST 2013 : oracle.apps.fnd.soa.provider.services.jca.JCAHandler.invoke : found runtime classes
Fri Aug 23 19:19:04 CST 2013 : oracle.apps.fnd.soa.provider.services.jca.JCAHandler.invoke : created instance for runtime classes
Fri Aug 23 19:19:04 CST 2013 : oracle.apps.fnd.soa.provider.services.jca.JCAHandler.invoke : runtime Methods found [Ljava.lang.reflect.Method;@2ba02ba0
Fri Aug 23 19:19:04 CST 2013 : oracle.apps.fnd.soa.provider.services.jca.JCAHandler.invoke : method executeRequestResponseOperation found
Fri Aug 23 19:19:04 CST 2013 : oracle.apps.fnd.soa.provider.services.jca.JCAHandler.invoke : executing 3 parameter method
Fri Aug 23 19:19:05 CST 2013 : oracle.apps.fnd.soa.provider.services.jca.JCAHandler.invoke : Exception returned from JCA Service Runtime.java.lang.reflect.InvocationTargetException
Fri Aug 23 19:19:05 CST 2013 : oracle.apps.fnd.soa.provider.services.jca.JCAHandler.invoke : Exception returned from JCA Service Runtime.oracle.apps.fnd.soa.util.SOAException: ServiceProcessingError: Exception returned from JCA Service Runtime. null
Fri Aug 23 19:19:05 CST 2013 : oracle.apps.fnd.soa.provider.services.jca.JCAHandler.handleRequest : Exception returned from JCA Service Runtime.oracle.apps.fnd.soa.util.SOAException: ServiceProcessingError: Exception returned from JCA Service Runtime. Exception returned from JCA Service Runtime. null
Fri Aug 23 19:19:05 CST 2013 : oracle.apps.fnd.soa.provider.SOAProvider.createErrorResponseMessage : Creating Error Response Message.
Fri Aug 23 19:19:05 CST 2013 : oracle.apps.fnd.soa.provider.SOAProvider.getNLSTranslatedMessage : Error code : FND_SOA_SERVICE_EXECUTION_ERR
Fri Aug 23 19:19:05 CST 2013 : oracle.apps.fnd.soa.util.SOAContext.setSecurityContext : Is security context set = true
Fri Aug 23 19:19:05 CST 2013 : oracle.apps.fnd.soa.util.SOAContext.setNLSContext : Is nls context set = true
Fri Aug 23 19:19:05 CST 2013 : oracle.apps.fnd.soa.provider.SOAProvider.getNLSTranslatedMessage : NLS Compliant Error Msg = FND_SOA_SERVICE_EXECUTION_ERR
Fri Aug 23 19:19:05 CST 2013 : oracle.apps.fnd.soa.provider.SOAProvider.createErrorResponseMessage : Setting fault string = FND_SOA_SERVICE_EXECUTION_ERR:oracle.apps.fnd.soa.util.SOAException: ServiceExecutionError: Error while executing the service Exception returned from JCA Service Runtime. Exception returned from JCA Service Runtime. null
    :Please see service monitor logs for full error trace
Fri Aug 23 19:19:05 CST 2013 : oracle.apps.fnd.soa.provider.SOAProvider.createErrorResponseMessage : Error Response Message Created
Fri Aug 23 19:19:05 CST 2013 : oracle.apps.fnd.soa.provider.SOAProvider.processMessage : oracle.apps.fnd.soa.util.SOAException: ServiceExecutionError: Error while executing the service Exception returned from JCA Service Runtime. Exception returned from JCA Service Runtime. null
    at oracle.apps.fnd.soa.provider.services.jca.JCAHandler.handleRequest(JCAHandler.java:135)
    at oracle.apps.fnd.soa.provider.SOAProvider.processMessage(SOAProvider.java:366)
    at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:958)
    at oracle.j2ee.ws.server.WebServiceProcessor$1.run(WebServiceProcessor.java:388)
    at java.security.AccessController.doPrivileged(AccessController.java:284)
    at javax.security.auth.Subject.doAs(Subject.java:573)
    at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:385)
    at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:481)
    at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:114)
    at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:96)
    at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:200)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:734)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391)
    at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:908)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:458)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
    at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
    at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:735)
java.lang.reflect.InvocationTargetException
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:45)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
    at java.lang.reflect.Method.invoke(Method.java:599)
    at oracle.apps.fnd.soa.provider.services.jca.JCAHandler.invoke(JCAHandler.java:193)
    at oracle.apps.fnd.soa.provider.services.jca.JCAHandler.handleRequest(JCAHandler.java:123)
    at oracle.apps.fnd.soa.provider.SOAProvider.processMessage(SOAProvider.java:366)
    at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:958)
    at oracle.j2ee.ws.server.WebServiceProcessor$1.run(WebServiceProcessor.java:388)
    at java.security.AccessController.doPrivileged(AccessController.java:284)
    at javax.security.auth.Subject.doAs(Subject.java:573)
    at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:385)
    at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:481)
    at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:114)
    at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:96)
    at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:200)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:734)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391)
    at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:908)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:458)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
    at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
    at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:735)
Caused by: org.collaxa.thirdparty.apache.wsif.WSIFException: file:/xxxx/soa/PLSQL/4392/INVOKEFMSWS.wsdl [ INVOKEFMSWS_ptt::INVOKEFMSWS(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'INVOKEFMSWS' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
; nested exception is:
    ORABPEL-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
See root exception for the specific exception. You may need to configure the connection settings in the deployment descriptor (i.e. $J2EE_HOME/application-deployments/default/DbAdapter/oc4j-ra.xml) and restart the server. Caused by javax.resource.spi.InvalidPropertyException: Missing Property Exception.
Missing Property: [DBManagedConnectionFactory.userName].
Make sure the property is set in the interaction (activation) spec by editing its definition in the wsdl.
    at oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA.executeRequestResponseOperation(WSIFOperation_JCA.java:642)
    at oracle.tip.adapter.client.JCABindingOperation.invokeWsifProvider(JCABindingOperation.java:275)
    at oracle.tip.adapter.client.JCABindingOperation.executeRequestResponseOperation(JCABindingOperation.java:182)
    ... 30 more
Caused by: ORABPEL-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
See root exception for the specific exception. You may need to configure the connection settings in the deployment descriptor (i.e. $J2EE_HOME/application-deployments/default/DbAdapter/oc4j-ra.xml) and restart the server. Caused by javax.resource.spi.InvalidPropertyException: Missing Property Exception.
Missing Property: [DBManagedConnectionFactory.userName].
Make sure the property is set in the interaction (activation) spec by editing its definition in the wsdl.
And in MOS, I found below related metalink note, But I think my case is not same with the description in that note, bcz the reponsibility I provided is not null, and should be a correct value.
FND_SOA_SERVICE_EXECUTION_ERR Error When Invoking EBS SOA Gateway Web Service (Doc ID 1512956.1)
Thanks in advance
Paul

Hi, PaulTian ,
Have you find the solution? I have the same problem, and it world not be responsibility reasons. The webservice worked well ,but it stopped when applied a patch.
Kevin

How do I find the jsp code behind an Oracle EBS page

Hello,
I have not worked with Oracle EBS in about 3 years and am somewhat new to JSP. I am trying to figure out how it all works and would like to go from the front end Oracle EBS screen to the source code jsp file.
I was able to find the queries behind the screen by clicking on the about page link. I was aslo able to find plenty of jsp files in the OA_HTML directory on the server but I was not able to line any of them up with an EBS page on the front-end of Oracle apps.
With Oracle forms it seems much simpler when I just easily get the form name from the screen (Help->About Oracle applications) and then just open up the corresponding fmb with the same name.
How do I find this corresponding jsp file?
Thanks

Credit cards have security codes on them, either on the back on the signature strip or some cards have it on the front : credit card security code. None of the gift cards that I've bought have had a security code on them

Oracle EBS is patehtically working on VM Ware although it has same specs as of physical machine.

Similar Messages

Maybe you are looking for