Oracle EBS R12 and user account

Hi All,
I been searching through the administration guide / security guide but I cannot find where we can set the number of time a user can try to log in before his account get locks. Does anyone know?
Thank,
Felix

It is a profile option "Signon Password Failure Limit". See MOS Doc 564125.1 (How to setup Password Security?)
HTH
Srini

Similar Messages

Mapping Roles/Groups between Oracle EBS R12 and OBIEE 11g

Hi,
We are implementing OBIEE 11g with Oracle EBS R12 as source system. Also we are using Out of the box RPD for Oracle EBS R12.
But we are facing lot of challenges to map OBIEE 11g groups and EBS roles and responsibilities. We do not have prior experience with EBS as source system.
Can anyone tell how to map between obiee groups with Oracle E-Business suit R12
Is there any document link or notes regarding this.
Any information regarding this will be a great help.
Thanks in advance

Hi,
I am also looking for the solution to implement SSO of OBI 11g with EBS r12, what i understand from your post that you have configured SSO between OAM and EBS R12.
Below is the link to configure SSO between EBSR12 and OBI 11g.
http://www.astcorporation.com/images/PDFs/White_Papers/2012/AST_White_Paper-EBS-OBIEE_11g_Integration.pdf
I want one clarification from you , once you read the above article what is your opinion do we require OAM integration if we want only EBS SSO with OBI11g ? I am bit confused in this ?
Whats the use of OAM in this integartion ?
Can you please help me.
Thanks in Advance.
Regards,
Tarang Jain

Capture XML data payload into database table (Oracle EBS R12)

Hi All,
We have a XML Publisher report which generates output in PDF format. We want to capture the XML data payload generated by this report and put it into a DB table once the PDF is generated.
This report is generated through Oracle EBS R12 and XML Payload is stored by oracle by default in $APPLCSF/out directory.
Any pointers would be helpful
br

Couple of options, this one is probably the easiest without knowing other requirements (e.g., do you have to store the output as XML, or do you just the data available so you can output in XML later?).
Capture the SQL statement that generates the output in the first place. If you have that statement, you can insert into some table using the select statement. Once you have the report data (and you can tag that particular set of data with a job ID, timestamp, whatever, in case you need to store it and distinguish it from other reports down the road), you can generate XML output using the PL/SQL built-in DBMS_XMLGEN.
Is that what you are looking for?

Oracle ILM assistant for Oracle EBS R12.1 application with 11.1.0.7 DB

Oracle ILM through its ILM Agent, which is a database component provides option for data archiving.
Need to know how ILM agent can be used against Oracle EBS R12 and the options available:
a. Does ILM assistant map to industry Compliance requirements and can we add or modify based on additional Client requirements
b. Is this configured for all components and are the business rules (default) taken care in terms of archiving related data, if not what are the options available
c. What are the options to archive data
i. On Same and archive database
ii. Other RDBMS (mysql, or open source database)
d. Access to archived data
i. Is archive data available from the existing application or only from backend database
ii. Does ILM assistant provide options to access archived data (same Oracle RDBMS or heterogeneous database)
e. Retention options
i. Does ILM assistant provide multi tier retention options for archived data for different range (# of years)
Edited by: user9031099 on May 9, 2013 11:00 PM
Any update on my query please...?

Limits the Preferred Read-Write Tablespace to only 1 where as in Oracle EBS we would require multiple tablespaces to be Preferred Read Write. Can we extend the functionality of ILM assistant to have multiple Read-Write tablespaces...?

How to deployed jsp report to Oracle EBS R12

Hi,
The jsp report deploy using Oracle Report. How to deploy the jsp report to Oracle EBS R12 and calling jsp report through Self-Service Menu.
Thank you.
Wilson

Hi,
What tool you have used to develop those pages?
Please see the docs referenced in this thread.
I want to start OAF R12 please give me PDF
I want to start OAF R12 please give me PDF
Thanks,
Hussein

Memory and No. of Processor calculation for Oracle EBS R11 and R12

Can some one please tell me …. How to calculate required Memory and No. of Processors for Oracle EBS R11 and R12.
For example we have 50 Concurrent users and 100 named (i.e. the users which are doing only Data entry.), so how to How to calculate required Memory and No. of Processors
Please guide me on the same.
Thanks,

Please refer to the following links, it may be helpful:
Oracle Applications Benchmark White Papers
http://www.oracle.com/apps_benchmark/html/white-papers-e-business.html
Oracle Applications Standard Benchmark White Papers
http://www.oracle.com/apps_benchmark/html/white-papers.html
Hardware requirements for Oracle APPS
Hardware requirements for Oracle APPS

How to create a .exe script to start and stop Oracle EBS R12 in Linux

Hello,
I have installed Oracle EBS R12 in Linux enterprise through Virtual box on windows 7 professional. It takes a long time to start and stop EBS as I have to start and stop the scripts manually - can someone please help me with the following (I have tried searching the web and Oracle for help but have had no joy);
Q1. I want to create a executable file in Linux so I can double click the file in Linux to start EBS automatically instead of going through each script manually
Q2. I want to create a executable file in Linux so I can double click the file in Linux to stop EBS automatically instead of going through each script manually
you help will be appreciated.
Ali

I have installed Oracle EBS R12 in Linux enterprise through Virtual box on windows 7 professional. It takes a long time to start and stop EBS as I have to start and stop the scripts manually - can someone please help me with the following (I have tried searching the web and Oracle for help but have had no joy);
Q1. I want to create a executable file in Linux so I can double click the file in Linux to start EBS automatically instead of going through each script manually
Q2. I want to create a executable file in Linux so I can double click the file in Linux to stop EBS automatically instead of going through each script manually
you help will be appreciated.Please see these links.
https://forums.oracle.com/forums/search.jspa?threadID=&q=Autostart+AND+Services&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Auto+AND+Start+AND+Services&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Managing Server Processes
http://docs.oracle.com/cd/E18727_01/doc.121/e13675/T530130T530133.htm#5274555
Thanks,
Hussein

Mapping Roles/Groups between OBIEE 11g and Oracle EBS R12

Hi,
We are implementing OBIEE 11g with Oracle EBS R12 as source system. Also we are using Out of the box RPD for Oracle EBS R12.
But we are facing lot of challenges to map OBIEE 11g groups and EBS roles and responsibilities. We do not have prior experience with EBS as source system.
Can anyone tell how to map between obiee groups with Oracle E-Business suit R12
Is there any document link or notes regarding this.
Any help regarding this will really save us.
Thanks in advance

Please read:
Integrating with EBS Suite Security: http://docs.oracle.com/cd/E28280_01/bi.1111/e16364/ebs_actions.htm#BIEIT1321
As I understand you need to create a Connection Pool to your EBS database. I think that would be a serious security aspect for the integration to work over two different networks. But I don't think it's impossible.
Domain Prerequisites is another challenge in this scenario.
More specifically: http://docs.oracle.com/cd/E28280_01/bi.1111/e16364/ebs_actions.htm#CHDHCAFD

Unable to open XML report in Oracle EBS r12

Hi,
I have new installation of Oracle EBS r12 (12.1.1) on linux.
To test the XML report, I changed the output of standard report 'Active Users' from 'Text' to 'XML' and defined the data definition and template for this report.
I am unable to see the output for XML reports. The report completes without error, however I cannot open the output file.
The browser opens for fraction of a second and then closes down. My client machine is Windows 7 and I used Microsoft words 2010 to build template
I used the 5.7.201 version of BI publisher to create the rtf template.
Please help me to resolve this issue.
Thanks

I changed the output of standard report 'Active Users' from 'Text' to 'XML' and defined the data definition and template for this report.
looks like xml publisher report, so output for concurrent must be 'XML'
******* I have changed the output of concurrent program 'Active Users' from 'Text' to 'XML'
I am unable to see the output for XML reports.
how you see it?
******* I tried to open the report by clicking on 'Output' button from view request screen of EBS.
did you try after concurrent completed check 'diagnostic -> view xml'?
******* I haven't tried this. Will do now.
The report completes without error, however I cannot open the output file
what is error?
******* There is no error, the request completed successfully. When I tried to open the output file by clicking 'output' button, the browser doesn't open.
did you check OPP log?
******* There is nothing in the OPP log.
if concurrent failed so first of all check your code - data template and package (if used)
******* I used the standard EBS report 'Active Users' and just changed the output from 'Text' to 'XML' and attached the rtf template.

How to upload data into form of Oracle EBS R12 using ATS ver 9.0

Hi experts,
Could you please guide me how to upload data into form on Oracle EBS R12 using Oracle Application Testing Suite verson 9.(The simpliest way)
For example: I need to create user account on Oracle EBS. Normally, I use Dataloader to upload the data, however it just can upload one by one record, cannot upload multi record at same time. Moreover if the performance of server is low, so I will get the issue when using dataloader.
Thanks in advance
Best Regards
Hieu

Hi you can create Virtual users to enter data. Note than you have to name the objects accordingly.
For Example default recording provided by Open script is ObjectNAME_(Index No of the object).
when you record one iteration the name of any object would be ObjectNAME_(0)
You can then create virtual users so the index will increment as the total number of Virtual users increases. Also you have to handle which row of your test data would get mapped to which Virtual user in the script run session.
Thanks

Oracle EBS R12 for Windows Installation Error

Hi,
I tried to install Oracle EBS R12 for Windows. My installation had failed. Listed below is the log information. On the Second log file (further down below) it is saying "TNS:no listener". Please help.
FIRST LOG FILE:Log Path: C:\Orale\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\06132024
C:\Users\Bing\AppData\Local\Temp>if 0 == 0 goto :TCFG_OK
C:\Users\Bing\AppData\Local\Temp>echo "runProcess_4"
"runProcess_4"
C:\Users\Bing\AppData\Local\Temp>REM
C:\Users\Bing\AppData\Local\Temp>REM Perform the instance configuration
C:\Users\Bing\AppData\Local\Temp>REM
C:\Users\Bing\AppData\Local\Temp>echo "Statusstring Configuring Database Technology Stack"
"Statusstring Configuring Database Technology Stack"
C:\Users\Bing\AppData\Local\Temp>(echo APPS & echo APPS ) | J:\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -DCONTEXT_VALIDATED=true -mx512M -classpath .;J:\StageR12\startCD\Disk1\rapidwiz\jlib\java;J:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyDBTechStack -e C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_bing-pc.xml -stage J:\StageR12\startCD\Disk1\rapidwiz -showProgress -phase cfg -nopromptmsg
Log file located at C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\ApplyDBTechStack_06132042.log
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed RC-00110: Fatal: Error occurred while relinking of ApplyDBTechStack
C:\Users\Bing\AppData\Local\Temp>if 1 == 0 goto :ICFG_OK
C:\Users\Bing\AppData\Local\Temp>echo "Cannot execute configure of database ORACLE_HOME using RapidClone\n";
"Cannot execute configure of database ORACLE_HOME using RapidClone\n";
C:\Users\Bing\AppData\Local\Temp>if "" == "TRUE" goto :ICFG_OK
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
SECOND LOG FILEC::\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\ApplyDBTechStack_06132042.log
LOCAL : VIS
ORACLE_SID :
PATH : C:\Oracle\VIS\db\tech_st\11.1.0\perl\5.8.3\bin\MSWin32-x86-multi-thread\;C:\oracle\VIS\db\tech_st\11.1.0\bin;C:\oracle\VIS\db\tech_st\11.1.0\appsutil\jre\bin;C:\oracle\VIS\db\tech_st\11.1.0\appsutil\jre\bin;J:\StageR12\startCD\Disk1\rapidwiz\unzip\NT;C:\oracle\VIS\db\tech_st\11.1.0\bin;C:\Program Files (x86)\Oracle\jre\1.3.1\bin;C:\Perl\bin\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\hp\bin\Python
LD_LIBRARY_PATH : C:\oracle\VIS\db\tech_st\11.1.0\lib
ECHO is off.
ECHO is off.
The log information will be written to
"C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\addlnctl.txt"
ECHO is off.
ECHO is off.
Starting listener process VIS ...
ECHO is off.
LSNRCTL for 32-bit Windows: Version 11.1.0.7.0 - Production on 13-JUN-2009 20:43:12
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=bing-pc.horse.com)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL for 32-bit Windows: Version 11.1.0.7.0 - Production on 13-JUN-2009 20:43:14
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
addlnctl.cmd exiting with status 1
OpenSCManager failed
adsvdlsn.cmd exiting with status 1002
ERRORCODE = 1002 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Setup Phase
Running Setup Process 5 of 6 for AppsUtil
Executing script in InstantiateFile:
C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc\afmkinit_inst.cmd
script returned:
Sat 06/13/2009
08:43 PM
"afmkinit_inst.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Setup Phase
Running Setup Process 6 of 6 for AppsUtil
Executing script in InstantiateFile:
C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc\afmkinit.cmd
script returned:
Sat 06/13/2009
08:43 PM
1 file(s) copied.
1 file(s) copied.
1 file(s) copied.
"afmkinit.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Skipping Profile Phase
Skipping Apply Phase
adcvmlog.xml renamed to C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\adcvmlog.xml.06132042
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc
adsvdlsn.cmd INSTE8_SETUP 1002
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDBTechStack
Thanks in advanced,
Edited by: amorsolo on Jun 15, 2009 9:12 PM

Hi user3726038,
I have seen posting about the installation of EBS R12/i11 saying it does not work with Windows Vista (64 bit). I went ahead and tried it anyway to see what kind of errors I get and to confirm if the errors I get are consistent with other people using Windows Vista. FYI, my installation went as far as 99% complete of step 2 of 5 before it errored out. I checked and noticed that many components of EBS have been installed with status equal zero which is good.
When I got the "TNS-12541: TNS: no listener", I went to Windows services, located the Oracle TNS service that was created by the EBS installation and tried to start it. Then I got this error: "error 1053 the service did not respond to the start or control request in a timely fashion". I googled the error message and the resolution is: "To resolve this problem, obtain the latest service pack for the Microsoft .NET Framework 1.1.". I have tried this but it does not work because my Windows Vista uses a higher version of .Net Framework 1.1. I have done more research but to no avail. However, it is fun as I learn many things about the EBS intallation and Windows Vista.
By the way, these are the steps when I run the rapidwiz on Windows Vista. Click on Start => Click on command prompt => right click on command Prompt => select run as administrator => CD to the path where the rapidwiz reside. Somehow if I use the regular command prompt the installation will die on step 1 of 5 even when I log in as administrator.
In your case you are using Windows 2k3. Make sure your OS is not 64 bit. Whenever you get an error and it does not say much, google it to see the resolution and make sure you read the Installation Guide. Hope this helps.

How to configure RMAN - Oracle EBS R12

Hi,
I have installed Oracle EBS R12 on OEL 5.6 and want to configure Backup strategy for Database. Database Version is 11.1.0.7. Currently Database is in Noarchivelog mode and want to take backup of database using RMAN. Can anyone guide me what are the steps to follow in order to achive that ?
Regards,
Priyanka

You can use RMAN to take backup in noarchive log mode.However you will be able to take cold backup only.
Use this,
RMAN> run {
shutdown immediate;
startup mount;
backup database;
alter database open;
Note:
RMAN does not permit you to make inconsistent backups when the database is in NOARCHIVELOG mode. If you employ user-managed backup techniques for a NOARCHIVELOG database, then you must not make inconsistent backups of this database.
Edited by: user12943013 on Apr 13, 2011 5:20 PM

How to Stage directory for Oracle EBS R12.1.1 on Window Server 2008 ?

Hi Every Body,
1- How to Stage directory for Oracle EBS R12.1.1 downloaded from e-delivery.com on Window Server 2008.?
-- I have download all files from e-delivery and check the md5 and all files are OK.
I extracted the entire files with winrar program to the same directory and during the unzipping I was notified to replace these files (dvd.label and component.label) and I agreed each time. So >>
2- Was that a problem ?
-- I have setup vc++ from VS6 , the sp6, cygwin , ... and set up the active directory and the domain.. and all other requirements.
BUT when i started the ebs set up it raise the "*Os User and Group Check*" error.
even if I am the only user and sure I am the Administrator. and also I run this Command to be sure
C:\>net localgroup administrators and it said that the administrator is one of the administrators group.
3- Somebody said that I have to change the temp and tmp folder to be on c:\ drive >> might this solve the problem?
thanks in advance.

Hi,
Most of the instructions you have mentioned , already was configured.
except for the tmp and temp directories.
And even I changed them from System Properties >> Advanced >> Environment Variable under User variable for Administrator and System variables , the problem still exist Os User and Group Check .
I attach the conf_VIS.txt file because I thought it may help.
http://www.4shared.com/document/1bS6aio5/conf_VIS.html
Actually I am not sure about the rapid install patch version but I have download the EBS R12 from the following link and I think it contains the recent installer version
Link >> Oracle E-Business Suite Release 12.1.1 Media Pack for Microsoft Windows (32-bit)
http://edelivery.oracle.com/EPD/Download/get_form?egroup_aru_number=11250138
Note If you still can not open the link just suggest a suitable file hosting and I will upload to you. here I used 4shared and hoped it suits you.

Oracle EBS R12

Oracle EBS R12 (12.1.3) / 11.1.0.7.0
Oracle Critical Patch Update Advisory - January 2013
How do we find whether the EBS users are suing SHA-1 password verifier?
What does it means of SHA-1 password verifier?
Thanks in advance

Hi;
The AD Check Digest utility checks the integrity of files downloaded from Oracle. Oracle provides MD5 and SHA-1 checksums for each Oracle Applications patch. The AD Check Digest can compute the checksums for the downloaded patch and also compare a given checksum with that of the downloaded patch. See Oracle Applications Maintenance Utilities for details.
Please review:
About Oracle Applications DBA Minipack 11i.AD.I [ID 233044.1] << I know its for r11 ;)
a vulnerability in the Oracle Database 11g servers using SHA-1 based password verifiers for authentication. This vulnerability allows an attacker to mount an off-line brute force attack that may yield a clear-text password if all of the following conditions are met by the attacker:
Please review:
Mitigating Measures for Vulnerability CVE-2012-3137 [ID 1492721.1]
I belive You are on 11g so SHA-1 is already avaliable on your system
Regard
Helios

Oracle EBS R12 application Production contact person contact details

Hi
Any one can provide me contact details of Oracle EBS R12 application production head, coz I would like to introduce some new feature can be added in EBS R12, then R12 will more user friendly users and other process of application reduce the process time.
Thanks in advance
Regards
[email protected]
9910059723

Hi,
I would suggest you contact Steven Chan (Senior Director in the Oracle Applications Technology Integration group).
Oracle E-Business Suite Technology - Blog Authors
http://blogs.oracle.com/stevenChan/about.html
Steven Chan monitors "Technology - LCM: R12 Install/Upgrade" forum, so you may post your suggestions in this forum, or contact him directly by email through the link referenced above.
Technology - LCM: R12 Install/Upgrade
LCM: R12 Install/Upgrade
You can also find Oracle contact in this page, and Oracle should they should connect you with the right person.
Oracle E-Business Suite Applications Oracle
http://www.oracle.com/us/products/applications/ebusiness/index.htm
Regards,
Hussein

Oracle EBS R12 and user account

Similar Messages

Maybe you are looking for