Oracle EBSR12.1 installation issues - help me out to solve the issue ?

Folks,
we are facing issues in installing oracle EBS R12.1 in windows vista. downloaded from edelivery store and copied into hard disk. staging was not done , directly we started the rapidwiz.cmd.
after completion of 33% of rapidwiz installation throws jre/NT/1.5.0/bin not found. but 1.6.0 is only found in jre/NT/ .
last 3 lines of error message
Starting from CD area C:\oracleR12.1\B53824-01_3of4\startCD\Disk1
RW-50010: Error: - script has returned an error: 2
Returning - 0
Thanks in advance,
Nithya

thanks hussien
i tried the other way around too.
i copied the contents of the 1st disk (start here dvd) to my hdd @ c:\oracle\disk1
from there i ran the rapidwiz like:
c:\oracle\disk1\disk1\rapidwiz\rapidwiz.cmd
no matter what, it gets stuck @ 33% with the same error "windows cannot find .\jre\NT\1.5.0\bin\java...."
i notice that in the contents of the dvd, i dont have 1.5.0 in the specified (jre\NT\1.5.0\) location.
then i copied the contents of the 1st dvd again to my hdd & renamed the 1.6.0 folder to 1.5.0
opened the rapidwiz.cmd file & altered the path from NT\1.6.0 to NT\1.5.0
& executed the rapidwiz.
this time it reached 33%, paused for a while & immediately touched 100%. nothing after that.
since its the first install of apps for me, pls guide me on how to prepare the stage area.
also, this time i executed the rapidwiz as an administrator; to ensure that im not having permission issues.
i have all the pre-requisites installed correctly.
thanks for your time. appreciate it.

Similar Messages

Hi i have updated the 8.1 in my i phone 4s . then i got in my home screen i tunes and charging symbol only . its not getting on . can you help me out to solve the issue with my phone ?? thanks.

hi i have updated the 8.1 in my i phone 4s . then i got in my home screen i tunes and charging symbol only . its not getting on . can you help me out to solve the issue with my phone ?? thanks.

Hi vijayanandhtkp,
It sounds like you are getting the Connect to iTunes screen as discussed in this article.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
If so, please check out this article as linked from there.
Use iTunes to restore your iOS device to factory settings - Apple Support
Thank you for using Apple Support Communities.
Nubz

I am not being able to create my apple ID as my card details are not being accepted by the app store. i tried with my visa card as well as master card. help me out to solve the problem..

I am not being able to create my apple ID as my card details are not being accepted by the app store. i tried with my visa card as well as master card. help me out to solve the problem..

Were the VISA and MasterCard issued to you by a bank in the country where you reside and do they have a verifiable billing address in the same country?
Or are these debit cards that you bought in a local store. Apple does not accept debit cards that you bought.

Hi guys i have an ipad 1 and when i plug it in to my macbook pro picasa opens up and show its name but when i open itunes i cant find the name, ive been working my head out to solve the problem please help me:(

hi guys i have an ipad 1 and when i plug it in to my macbook pro picasa opens up and show its name but when i open itunes i cant find the name, ive been working my head out to solve the problem please help me:(

Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
http://support.apple.com/kb/TS3694
Solution below.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

Hi Friends... I'm trying to delete a back-up file on mu TC but I get the message "The operation could not be completed because the item "bands" is in use. I'd like to start the Back from scratch, could help me out with deleting the current file?

Hi Friends...
I’m trying to delete a back-up file on mu TC but I get the message “The operation could not be completed because the item “bands” is in use. I’d like to start the Back from scratch, could help me out with deleting the current file?

Sorry, I am very confused. I asked the following question....
Is this the only backup file on your Mac, or do you have other backup files and data on the Time Capsule disk?
The answer that you gave was....
This is the only one
Now you are saying that....
But I have lots of other files on Time Capsule! The back up file is only one of them.
Can you clarify, please?

Can anyone help me out to find the diameter of the hole using imaq vision?

have to measure the diameter of the holes and generate the report in the format given belowI have also enclosed the image to be processed)
example:
HOLE SPECIFICATIONS PLATE NO. 1
X Y DIAMETER X Y
C 8.4 3.79 3.122 8.472 3.675
D 8.51 3.54 3.117 8.579 3.647
F 0 0 1.089 0 0
H 4.08 9.474 1.083 4.045 9.731
J 3.78 9.86 0.845 3.698 9.957
can anyone help me out to solve it,, Thanking you in advance!
Attachments:
03260005.JPG ‏103 KB

Hello.
I have some suggestions for the image processing component of your application. I have attached a Vision Assistant script to this post (Vision Assistant 7.1) which performs essentially the following steps. These steps could be followed in any programming environment and should yield decent results:
Extract the Luminance plane from the RGB image (simply to get it into 8-bit mono format for the thresholding. Could be done with a color threshold VI).
Threshold the image so that the bright components are left and the dark is set to 0.
Perform a particle filter to remove the particles that are too large (the surrounding area).
Perform a particle analysis on the remaining particles, which should be the holes in the
plate only. Set the particle analysis to return the Location of the 'Center of Mass X' and 'Center of Mass Y,' and the perimeter (diameter).
This type of processing would allow the plate to be rotated, have different patterns, etc. and you should still be able to get the information about the holes.
Hope this helps.
Regards,
Colin C.
Applications Engineering
Colin Christofferson
Community Web Marketing
Blog
Attachments:
ExampleHoleScript.scr ‏2 KB

Clicking sound comes on my iphone 4 while taking photos even when iphone is in silence mode...Please help me out to solve my problem

clicking sound comes on my iphone 4 while taking photos even when iphone is in silence mode...Please help me out to solve my problem

The iPhone has a 1 year warranty. Restore the phone in iTunes with the latest iOS to remove the 'gray market'. You will then have to send it to your close friend, at your expense, to take it back to the Apple store in Toronto to have the phone looked at. Then your close friend will need to send the phone back to you, at your expense.
I would also sudggest that you send your friend a sim from your carrier in India. This way after it is fixed/replaced he can try the sim at the Apple store to ensure that it is unlocked.
Good luck.

Help me out in delaying the ENTIRE CODE for few seconds?

I am using Flash and writing the code in AS3. I am using two "for" loops one inside the other and running a few statements. I want to delay the each statement for few seconds in the for loop? How can i do it? i even tried with the "Timer" Events and "setTimeout" but the for loop is executing without pausing the code.. Please help me out in solving this problem.. Anyone who solved this type of problem please do help me.

you can't control the speed of a for-loop.
you can remove your code from a for-loop and use a function to execute the code in your for-loop and you control how frequently you call the function.

My iphone 4 is getting stuck during gaming when sim card is inserted. Call anyone help me out to solve this problem?

My iphone 4 is getting stuck during gaming when sim card is inserted. Call anyone help me out to solve this problem?

That doesn't make any sense to me at all, unless the games you're trying to play have some sort of online connection/capability and you're in a weak signal area, thus the games can't make the required online connection. What happens when you turn cellular data off in settings: Settings>General>Network>Cellular Data>Off.

On Yahoo Mail...and ONLY Yahoo Mail..I get a 404 error after entering my user name and password. This doesn't happen with IE, just Firefox, and just Yahoo Mail. Yahoo was absouletly no help whatsoever; can you solve the mystery? Thanks

On Yahoo Mail...and ONLY Yahoo Mail..I get a 404 error after entering my user name and password. This doesn't happen with IE, just Firefox, and just Yahoo Mail. I tried uninstalling and reinstalling FF; no change. Yahoo was absolutely no help whatsoever; can you solve the mystery? Thanks

HI Emmet,
thanks so much for your posts back. I really appreciate it and yes that does help to know that you could not get it working.
I did have some success, in removing the SSL Authentication checkbox in the smtp server settings - I found that this allowed my friend to be able to send mail from the mail app via his sbcglobal (yahoo) account.
So that did help but of course the messages do not have ssl encryption and I'm not sure how big a deal that is for an individual. He is able to receive mail but unless the SSL authentication box is unchecked, he cannot send.
i hope that helps anyone out there also!
Thanks also for the tip about sparrow - yes I have heard of it and it is very popular, he may end up using that in the end.
Thanks again, much appreciated.
Felix

Oracle DB 12c Installation Issue

Hi,
OS: Windows 7 64 bit Enterprise edition
When i'm trying to install Oracle DB 12c on my machine.
Am Getting the below mentioned error
[INS- 30131] : Initial Setup required for execution of Installer Validation failed.
Any one faced this kinda error.
Thanks in Advance...

following forum id might help you out.
https://forums.oracle.com/thread/2567145?start=0&tstart=0
INS-30131: Initial setup required for the execution of installer validations failed.
Cause: Failed to access the temporary location.
Action: Ensure that the current user has required permissions to access the temporary location.

Oracle Client 11gR2 installation issue on RHEL v5.4 64-bit

Hi,
I am trying to install Oracle Client software 11gR2 on RHEL v5.4 64-bit. I have resolved all the libraries dependency as well as Kernel changes as suggested by the installer. The error in the log file is as attached. At present I have "skipped" this error and proceeded with installation.
While installing the client, the installer fails while configuring the Net CA with error:
INFO: Done parsing command line arguments.
INFO: Oracle Net Services Configuration:
INFO: #
INFO: # An unexpected error has been detected by HotSpot Virtual Machine:
INFO: #
INFO: # SIGSEGV (0xb) at pc=0xe5e97498, pid=27377, tid=4160075984
INFO: #
INFO: # Java VM: Java HotSpot(TM) Client VM (1.5.0_17-b02 mixed mode)
INFO: # Problematic frame:
INFO: # C [libnnz11.so+0x3c498]
INFO: #
INFO: # An error report file with more information is saved as hs_err_pid27377.log
INFO: #
INFO: # If you would like to submit a bug report, please visit:
INFO: # http://java.sun.com/webapps/bugreport/crash.jsp
INFO: #
WARNING: /home/oracle/app/oracle/product/11.2.0/client_1/bin/netca: line 178: 27377 Aborted $JRE $JRE_OPTIONS -classpath $CLASSPATH oracle.ne
t.ca.NetCA $*
WARNING:
INFO:
INFO: Completed Plugin named: Oracle Net Configuration Assistant
INFO: Oracle Net Configuration Assistant failed.
INFO: Oracle Net Configuration Assistant failed.
Also when I invoke the SQL Client; sqlplus user@db and enter the password, the sqlplus exits without any error and returns to the terminal console. Please note earlier I has getting a SELinux violation and have changed it to "permissive" mode
Please let me know how to resolve NetCA installation and the sqplus issue.
Thanks & regards,
Vinay

Hi,
Thet NetCA error occurs during installation and I believe the installer should take care of the ORACLE_HOME variable setting.
But before invoking sqlplus I have set the ORACLE_HOME and LD_LIBRARY_PATH setting in the .bash_profile as mentioned in the installation guide. The snippet of the profile file is:
export ORACLE_HOME=~/app/oracle/product/11.2.0/client_1
export JAVA_HOME=$ORACLE_HOME/jdk
export PATH=$ORACLE_HOME/bin:$JAVA_HOME/bin:$PATH;
export LD_LIBRARY_PATH=$ORACLE_HOME:$LD_LIBRARY_PATH
export TNS_ADMIN=$ORACLE_HOME/network/admin
export TWO_TASK=mmcoedb
I am able to tnsping to the server/service name too but when I try to login using the user/password using sqlplus, it simply exits without any error.
Please let me know how to resolve the error.
Best regards,
Vinay

Oracle Database 11g Installation Issue: ORA-12560:TNS: protocol adapter error.

Folks,
Hello. Initially, my Windows XP host name is "localhost" and IP address 127.0.0.1.
I installed Oracle Database 11g with Windows XP successfully and all Database clients work with Database instance correctly.
For some reasons, I uninstalled the entire Database Server and delete the entire installation directory /oracle.
I configured Windows XP IP address into 192.168.196.101 in order to ping other machines.
For my need, I installed Oracle Database 11g with Windows XP again. On step 7 of 8: Oracle Database Configuration Assistant, I got this error:
ORA-12560:TNS: protocol adapter error.
I click "Password Management" button, there are no rows in this Windows (no username, no lock accounts).
I check listener as below:
C:\>lsnrctl
LSNRCTL>start
Its output: listener name LISTENER has already been started.
LSNRCTL>status
Its output: ......Service DB1 has 1 instance. Instance DB1 status ready. The command completed successfully.
I check \Oracle\cfgtoollogs\dbca\DB1\trace file, the entry is :
listen[0]=LISTENER address=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(port=1522))
I also check \oracle\product\11.2.0\dbhome_1\NETWORK\ADMIN\SAMPLE\tnsnames.ora file and listener.ora file, the entries are the same as below
HOST=localhost port=1522
I think HOST=localhost and port=1522 is the cause of the error ORA-12560 because Windows XP has been configured into HOST=192.168.196.101.
But I don't understand how to solve this issue.
Can any folk tell me how to solve this issue ? need to cancel the installation on step 7 of 8 and install it again ?
Thanks.

Folks,
Hello. Oracle Database 11g Installation Wizard is on step 7 of 8. I don't cancel the Wizard. I am not sure whether there is effect or not. listener.ora is not removed. I have been waiting for a while after stop listener. I run the 3 commands again and copy the result as below:
C:\>lsnrctl stop
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 14-AUG-2013 19:32
:14
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1522)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
   64-bit Windows Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1522)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
   64-bit Windows Error: 61: Unknown error
C:\>
C:\>
C:\>
C:\>
C:\>
C:\>lsnrctl start
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 14-AUG-2013 19:33
:04
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
System parameter file is C:\SecondTime_OracleDatabase_Install_Directory\product\
11.2.0\dbhome_1\network\admin\listener.ora
Log messages written to c:\secondtime_oracledatabase_install_directory\diag\tnsl
snr\user-19yyar8x0d\listener\alert\log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1522
ipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1522)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1522)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date                14-AUG-2013 19:33:07
Uptime                    0 days 0 hr. 0 min. 3 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\SecondTime_OracleDatabase_Install_Directory\product
\11.2.0\dbhome_1\network\admin\listener.ora
Listener Log File         c:\secondtime_oracledatabase_install_directory\diag\tn
slsnr\user-19yyar8x0d\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1522ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1522)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
C:\>
C:\>
C:\>
C:\>
C:\>lsnrctl service
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 14-AUG-2013 19:36
:37
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1522)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0
         LOCAL SERVER
Service "DB1XDB" has 1 instance(s).
Instance "DB1", status READY, has 1 handler(s) for this service...
    Handler(s):
      "D000" established:0 refused:0 current:0 max:1022 state:ready
         DISPATCHER <machine: user-19YYAR8X0D, pid: 120>
         (ADDRESS=(PROTOCOL=tcp)(HOST=user-19yyar8x0d)(PORT=1051))
Service "DB1" has 1 instance(s).
Instance "DB1", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:19 refused:0 state:ready
         LOCAL SERVER
The command completed successfully
C:\>
As we see, listener.ora file is not removed by Stop command. I am on the installation Wizard. How to solve this issue ?
Thanks.

Oracle Express Batch Manager-Please Help me out-urgent

Dear all,
I have created a Relational Access Administrator project and mapped an Express Datamodel with RDBMS lookup and fact tables and created a Maintenance Procedure Using "Express Database Maintenance" from "Relational Access Administrator". After that when I tried to run that "Procedure" using "Batch Manager", it creates a Command definition file "~5848371.cmd" and nothing is showing in the "Job Monitor" tab of "Batch Manager". At the same time since it could not run the procedure, no Express database have been created to the specified path.
Please help me out, as I am in need for this very badly. I have gone through the document "Relational Access Administrator(User Guide)" from otn.oracle.com, but nowhere such type of problem have been addressed.
Thanking you in advance,
regards,
Manoj Ghosh,
Mail ID: [email protected]

There is a tutorial on building a chat application (or applet) on the ibm site.
http://www-105.ibm.com/developerworks/education.nsf/dw/java-onlinecourse-bytitle
You need to register to use it, but it is free.
Hope this helps
Peter

Oracle PIM Sync installation issues

We have experienced the PIM Sync installation issue where the client couldn't detect Outlook. We have several work stations downloaded the file and only one station has installed it successfully. We even tried to use the file that worked on that station to install into the ones that didn't work. However, we got no luck. Some of us had "Cannot Connect to Oultook" and some of us had error code - 0x083200006. Does someone have the same issue? We submitted a SR to Oracle Customer Care but haven't heard anything from them yet. We are hoping this got resloved as soon as possible. thanks!

In reference to you PIM Sync issue you did the took the correct action by contacting CRM On Demand customer care and submitting a SR.

Oracle EBSR12.1 installation issues - help me out to solve the issue ?

Similar Messages

Maybe you are looking for