Oracle Ebusiness Suite Release 12.1 for Linux
Hi,
I have installed a Fresh Instance of Oracle Ebusiness Suite Release 12.1.1.
Installation using rapidwiz was completed without any issue and I could login as sysadmin to the portal http://ora12.mycom.com:8000
When I restarted the System, the portal gave error. So I checked the processes, and found that none of the processes were started.
I feel that there must be some post installation tasks. But the documentation does not mention any thing for Auto Start at system boot.
Can some one point me to the task list?
Thanks in Advance
I have installed a Fresh Instance of Oracle Ebusiness Suite Release 12.1.1.What is the OS?
When I restarted the System, the portal gave error. So I checked the processes, and found that none of the processes were started.Did you start the services using adstrtal.sh script? Please issue "adopmnctl.sh status" command to confirm -- http://docs.oracle.com/cd/B53825_08/current/acrobat/121admp.pdf (Page 1-23, Starting and Stopping Application Tier Services).
I feel that there must be some post installation tasks. But the documentation does not mention any thing for Auto Start at system boot.
Can some one point me to the task list?No additional steps are required for starting the services and you will have to start it manually after rebooting the server.
Please make sure you have completed all the steps in the installation docs.
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86 [ID 761564.1]
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 [ID 761566.1]
Thanks,
Hussein
Similar Messages
-
How to integrating APEX with the Oracle eBusiness suite release 11i
I need to integrate Apex with Oracle eBusiness Suite Release11. APEX need to use ERP authentication (user name/password) and oracle APEX pages will be called from oracle eBusiness Relese 11i menu.
I have followed metalink doc. 373604.1 and also looked into http://www.oracle.com/technology/products/database/application_express/pdf/Extend_Oracle_Applications_11i.pdf
I have setup DAD on Apache server, oracle Apps functions/menu and created apex_authorise function and added to my APEX application. I have followed the all the steps from above pdf file.
Here is my issues:
1. When I try to launch a APEX page again it asking me for the user name password
2. If I remove login page from APEX application then I can launch my APEX application but I cannot see any images
3. I need to pass oracle ERP 11i user and responsibility information to APEX. How should I do this?
Any help will be really appreciated
Thanks in advanceMany customers want this and would have hoped that Oracle would have included this as an option. Unfortunately, the left hand(Oracle Apps product managers) don't talk to the right hand(Apex product managers). They totally missed this great opportunity to make life much easier for Oracle Apps customers who have been waiting for this capability that Apex provides. At the present time this is somewhat a black hole. There are people who have figured it out but no one has provided the recipe for everyone else. It's very unfortunate and a complete oversight by Oracle in my opinion. They've got thousands of people developing code but no one had any foresight to see who would use Apex and how they would use it.
-
Ebusiness Suite Release 12 Documents
Hi,
Please Check the Metalink Note:394692.1 for Release 12 document.
http://www.oracle.com/technology/documentation/applications.html
regards,
phani.kI have installed a Fresh Instance of Oracle Ebusiness Suite Release 12.1.1.What is the OS?
When I restarted the System, the portal gave error. So I checked the processes, and found that none of the processes were started.Did you start the services using adstrtal.sh script? Please issue "adopmnctl.sh status" command to confirm -- http://docs.oracle.com/cd/B53825_08/current/acrobat/121admp.pdf (Page 1-23, Starting and Stopping Application Tier Services).
I feel that there must be some post installation tasks. But the documentation does not mention any thing for Auto Start at system boot.
Can some one point me to the task list?No additional steps are required for starting the services and you will have to start it manually after rebooting the server.
Please make sure you have completed all the steps in the installation docs.
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86 [ID 761564.1]
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 [ID 761566.1]
Thanks,
Hussein -
Installation of Oracle EBusiness Suite 11i Release 10.2 on Red Hat Linux
Hello there,
It would be great if someone can help me with these questions
1. Which version of Red Hat Linux is suitable for installation of Oracle EBusiness Suite 11i Release 10.2.
2. I am downloading the EBS files from eDelivery site on my machine (Windows based). These are Zip files. How would these be usable on Linux machine?
3. Do I need stuff like MKS Toolkit on Linux? We tried installing on Windows 2003 server but had to abandon because we don't have MKS Toolkit. Is there some such pre-requisite on Linux?
Thank you.
RahulCopy all zip files to say /data/stage11i then unzip all files (as root) the process will create the correct file structure, you do not need to run adautostge.pl then in a terminal screen go to /data/stage11i/Disk1/rapidwiz and then type ./rapidwiz the installation wizard then guides you through the rest of the way. Run raoidwiz as root if you need multi user or for the demo single user run rapidwiz as oracle. Make sure you have created user and group for oracle and applmgr, also make those changes in the wizard it often defaults to say user oravis group dba. In linux you should have created localhost.localdomain sometimes the eth0 does not start, stop it in the device manager and then reactivate. Hope that helps.
-
Oracle Collaboration Suite Release 2 for Windows
Is Oracle Collaboration Suite Release 2 (9.0.4.1.0) available on Windows platforms. I found it is available for LINUX, Solaris, HP-UX and AIX. Any information.
Mohanunfortunately
OCS Release2 for windows is not available. -
Hello Can I install ebusiness suite release 12 on centos
Hello Can I install ebusiness suite release 12 on centos 5 and in that i install vmware ?
The download is from edelivery.oracle.com.. Is installing vmware compulsory..and if i install
vmware is it compulsory that i have to use Only Oracle vm
Edited by: pauljohny on Jan 23, 2010 3:23 PMHi,
Hello Can I install ebusiness suite release 12 on centos 5 and in that i install vmware ? CentOS is not certified as an application/database tier nodes, so you will have to go with one of the certified OS as per (Note: 761564.1 - Oracle Applications Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86).
The download is from edelivery.oracle.com.. Is installing vmware compulsory..and if i install
vmware is it compulsory that i have to use Only Oracle vmIf you use Oracle VM you do not have to use VMWare and (you need to use one of the two softwares to have Oracle Apps installed on the guest OS) -- See the following links/docs for details.
Note: 465915.1 - Using Oracle VM with Oracle E-Business Suite Release 11i or Release 12
Using Oracle VM with Oracle E-Business Suite Virtualization Kit
http://blogs.oracle.com/stevenChan/2009/12/oracle_vm_ebs_virtualization_kit.html
Regards,
Hussein -
Oracle EBusiness Suite Adaptors
Hi,
I am looking into using the adaptor for Oracle EBusiness Suite which comes with BPEL. I am unclear as to whether I need to obtain a separate license to use the adaptor or does all the functionality come with the SOA Suite Licence (including BPEL).
Thanks
AndyHow much memory do you have on this server?
I allocate around 3GB of memory to vmware.Oracle EBS R12 requires a minimum of 4 GB RAM, so allocating 3 GB to this VM is not enough.
Please also see these docs/links.
R12 on Oracle linux: how to tune the R12?
Re: R12 on Oracle linux: how to tune the R12?
Note: 396009.1 - Database Initialization Parameters for Oracle Applications Release 12
Thanks,
Hussein -
How to Integrate Oracle Ebusiness suite to FDQM to load into Essbase
Hi Experts,
I need a document regarding how to integrate Oracle EBS to FDQM.I am taking target as Essbase.I know how to integrate to HFM and loading the data to HFM.So please share me the document like How to get source file from E-Buisiness suite to load into Essbase.Pleaae share with an example
Thanks in advanceHi;
How to install Oracle Ebusiness suite R12.1.3 on RAC environmentsCheck below thread's mention note advice
Rrac-EBS wiht asm
Re: RAC for EBS R12
rac-r12-ebs-asm
Re: EBS R12 with RAC and ASM on AIX 5.3
RAC-R11-R12
Upgrade the 11.5.10.2 Instance with 10gRAC setup
How to implement shared appl top Shared appltop in R12
Shared appltop in R12
How to configure https for Oracle Ebusiness Suite R12.1.3Enabling SSL in Release 12 [ID 376700.1]
Enabling SSL with Oracle Application Server 10g and the E-Business Suite [ID 340178.1]
Also see*Steven Chan's blog entery*:
http://blogs.oracle.com/stevenChan/2009/08/ssl_advanced_configuration_wizard_ebs12.html
Regard
Helios -
Oracle EBusiness suite professions tasks and duties
Hello everybody
I inquire about something regarding Oracle EBusiness suite professions tasks and duties. I've tasked by my manager with writing a report lists the main tasks and key responsibilities for each of the following technical professions within Oracle E Business Environment:
1)-Apps DBA.
2)-Apps Technical Consultant (Apps Developer)
3)-Apps Business Consultant.
I've contacted Oracle Support recently via opening SR .But, They informed me that they don’t provide such information and therefore, they suggest me weather to contact Oracle Consulting to post here.
I would appreciate your help.
SamiI don't see how you'd be able to integrate OAM with EBS unless you have the oSSO (assuming of course that you're not on the bleeding edge, per 975182.1).
We are running the same configuration and have setup the redirects in OAM policy. We setup specific context roots for each application, then use OAM policy to redirect. (for example, http://iwa-server/ebs redirects to https://ebs-server)
Unique authorization rule for each redirect, then a unique "policy" on the "Policies" tab for each redirect. Each Policy maps to the respective Authorization Rule. -
Standard Manager is not working in Oracle Ebusiness Suite 11i
Hi,
Can anyone help me ...
Standard Manager is not picking up any requests in Oracle Ebusiness Suite 11i while other managers are picking up their requests and running it fine.
Regards
Ketan.Hi Hussein,
I have tried bouncing CM, Cmclean was also executed, but still the same issue exists.
One more thing which i have identified is when i include some concurrent request to Standard Manager , then that request is picked up by standard manager and it is running fine.
But this can be a workaround to the issue. We cannot simply keep on including concurrent request to Standard Manager.
So we are looking for a solution where Standard Manager should automatically pick up the request and run it fine. Which it was doing it earlier.
Regards -
Oracle 10g (10.1.0.2) for Linux x86 missing from download page?
Hello,
Why isn't there a download link to Oracle 10g (10.1.0.2) for Linux x86 on the 10g download page?
And what's the difference between 10.1.0.3 and 10.1.0.2?
ThanksHi,<br></br>
<br>The level of one release is different with plateform.
On the Oracle Database 10g Downloads you can find only final release, and not intermediare patch.</br><br>For example, the 10gR1 for Linux x86 is 10.1.0.3, and for Windows 32-bits this is 10.1.0.2, after what you can upgrade to the last patchset.
</br>
<br>Nicolas.</br> -
Integrating Oracle eBusiness Suite with banking services using Oracle SOA
Hi ,
I am working on a project for integrating Oracle eBusiness Suite with banking services using Oracle SOA. We have implemented Oracle SOA and trying to call bank's services using SOA.
The bank has provided its web services over http which accepts XML data as string through HTTPS post invocation and provides response accordingly in string XML Data.
For each service, specific format of request and response message has been provided.
I am trying to call their web services using HTTP binding adapter.
I would like to know whether my approach of calling bank's web service using HTTP binding adapter is correct or not.
Looking ahead for your valuable insight and advice.
ThanksHi,
Thank you for your reply.
Is the usage of B2B not applicable for this project ?
Thanks -
How to Stage EBusiness Suite 11i (media) DVDs to linux server
I've just recevied the media for Oracle Ebusiness Suite 11i in DVD format. I do not have a DVD reader on the VM paravirtual server which is where I need to install Oracle EBusiness Suite. As such I need a way to copy the entire DVD media to a file and then place that file into its own directory and unpack it so that I can install via rapidwiz.
What are some options for staging the EBusiness Suite media DVDs? . I have to mount each DVD and then is there a way to copy the contents of the DVD to one file so that I can then copy it to the desired server directory and then install?
ThanksPl indicate which version of 11i DVDs. The process to stage the software is documented in Chapter 1 of the Install Guide - http://download.oracle.com/docs/cd/B25516_18/current/acrobat/r115102ins.pdf
HTH
Srini -
Where can I find the Oracle Clusterware 11.1.0.7 for Linux x86
Hello,
I am testing upgrading Oracle 11g RAC from 11.1.0.6 to 11.1.0.7 on Linu x86 (RedHat 5.3/OEL 5.3)
I haven't been able to find the Oracle Clusterware 11.1.0.7 for Linux x86 download, which is required for the RAC upgrade.
Could someone tell me the patch/patchset number or how can I search for it in metalink?
Thanks!Hi,
You need to download patch 6890831
Please see the metalink note 800603.1 for 11.1.0.7 patch set and installation instructions for Linux x86.
Hope this helps.
Regards
Satishbabu Gunukula
http://oracleracexpert.blogspot.com
[Click here to delete archive logs using RMAN|http://oracleracexpert.blogspot.com/2009/08/delete-archive-logs-using-rman.html]
[Click here for Oracle Data pump export/Import with Examples|http://oracleracexpert.blogspot.com/2009/08/oracle-data-pump-exportimport.html]
Edited by: Satishbabu Gunukula on Aug 26, 2009 10:32 PM -
How to know Oracle Developer Suite Release Number?
Hi,
I have installed 11.5.10 CU2 on Windows XP SP2.
I have below dirs after installtion:
(1) D:\orclapps\orclappsappl
(2) D:\orclapps\orclappscomn
(3) D:\orclapps\orclappsdata
(4) D:\orclapps\orclappsdb\9.2.0
(5.1) D:\orclapps\orclappsora\8.0.6
(5.2) D:\orclapps\orclappsora\iAS
Following note 391564.1. I want to know Oracle Developer Suite Release to choose appropriate patch as per point 3.3. How can i know Developer Suite Release Number.
Thanks.We discussed this in the forum before, please see these threads/docs, it should be helpful.
how to find the developer version
how to find the developer version
How to Obtain Oracle Forms Version in Oracle Applications 11i from Command Line [ID 392793.1]
Thanks,
Hussein
Maybe you are looking for
-
Safari cannot connect to the App Store so I can setup an RSS Reader.
Let me be clear about a key point first - I can connect to the iTunes Store in the program, I can connect to the App Store in the program, and Safari has no problem acting as a browser. BUT, I want to use RSS feeds and this is where things fall down.
-
Error while collecting the process chain in a transport request
Hi Gurus, I am getting an error while collecting my process chain in a tranpsort request.I have to transport the request from DEV to QA system. When in RSA1--->transport connection i drag & drop the chain from left to right side pane then the Error o
-
When I import video and place it into timeline as a raw file with no fx or any added processing I get the message that the video is unrendered and therefore it doesn´t playback?
-
Where is the Preferences Folder in Mac OS X 10.9?
Hi, I'm having some problems learning the new operating system Mac OS X 10.9.1. I'm looking for the Preferences Folder or the Library Folder for a User Account. Can anyone tell me where to fine it, please? Thank you in advance of your time, Mel.
-
Error message when try to get help...
I upgraded from LR5 to LR6 and when I press F1 to obtain Help I obtain an error informing that the server is not found. I had no problems with previous versions of LR. Can you please help me with this?