Oracle Enterprise Linux 6.6 network connection issues

Dear Guru ,
after install OEL 6.6 x86_64 I noticed that the network connection is disconnect after while and need to manually choose the network connection Ex.(system eth0)
how to troubleshooting this issues and how to resolve it
Thanks

Oracle Linux 6 installs with all network connections disabled by default. If you're running a desktop environment, you can tell NetworkManager to start the interface automatically on boot. Right-click the network icon in the top right-hand corner and select "Edit connections". Then, highlight the interface you want to start on boot and click "Edit", finally click "Connect automatically". Note this can also be done by configuring the interface during installation.
If you are not running a desktop environment, you will have to edit the /etc/sysconfig/network-scripts/ifcfg-ethX file and set ONBOOT=yes.

Similar Messages

  • Oracle Enterprise Linux 5 w/ unixODC connect to Oracle DB 11g

    Hi,
    I am trying to configure our new install of Oracle Unbreakable linux (Enterprise v5) to connect to our Oracle 11g DB via ODBC. I have configured the odbc.ini and odbcinst.ini files. I have tried to do a test connection using isql. This is the error I am getting....
    $ isql -v JSI
    isql: symbol lookup error: /opt/oracle/product/11g/lib/libsqora.so.11.1: undefined symbol: SQLGetPrivateProfileStringW
    I understand this issue is with unixODBC and the liib.... libodbcinst.so.1.0.0. However, I have not found a way to fix this. Anyhelp would be greatly appreciated on getting this working.

    Well I have gotten a bit further along. I was able to get a working 2.2.12 rpm. I now issue the command....
    $isql -v JSI
    [S1000][unixODBC][Oracle][ODBC][Ora]ORA-12504: TNS:listener was not given the SERVICE_NAME in CONNECT_DATA
    [ISQL]ERROR: Could not SQLConnect
    Now I am getting this error.
    I also know that my tnsnames.ora and linstener.ora files are correct b/c I can connect to remote Databases using sqlplus. I have downloaded a free trial of easysofts Oracle ODBC Driver and it works perfectly. So my configs should be right. My yquestion I guess is why does the Oracle supplied ODBC driver not work?
    Message was edited by:
    Rever75

  • Oracle Enterprise Linux 5u5 install issue

    Please help.
    I'm trying to install Oracle Enterprise Linux 5u5 on a desktop computer.
    In GUI mode, after the network adapter settings screen i press Next, and the system hangs.
    In Text mode, after the network adapter settings screen i press Next, and the following error is displayed.
    ------------------| Exception Occurred |------------------
    Traceback (most recent call first):
    File
    "/usr/lib/anaconda/textw/timezone_text.py",
    line 33, in getTimezoneList
    zt = zonetab.ZoneTab()
    File
    "/usr/lib/anaconda/textw/timezone_text.py",
    line 61, in __call__
    timezones = self.getTimesoneList()
    File "/usr/lib/anaconda/text.py", line
    582, in run
    rc = win(self.screen, instance)
    File "/usr/bin/anaconda", line 955, in
    <module>
    anaconda.intf.run(anaconda)
    AttributeError: 'module' object has no attribute 'ZoneTab'
    I've tried different languages and different network adapter settings, but I don't think it has something to do with the problem.
    Can anyone tell me what to do to continue the installation?
    Thanks in advance

    Can you provide more information, like what is your desktop system?
    Besides, Enterprise Linux is not designed to work on Desktop or other portable computers. Your Ethernet may not be the only issue.
    You may check the following link:
    https://bugzilla.redhat.com/show_bug.cgi?id=247399
    " I am seeing this behaviour as well on installing Fedora 9 Beta on an older Dell Latitude C840 laptop. I was able to get this error in a subsequent install by skipping the network
    configuration."
    "This really seems like something that could be caused by errors reading the CD media. Could someone who is seeing this take a look at tty4 or /tmp/syslog and see if there are kernel read error messages?"
    Edited by: waldorfm on Nov 1, 2010 11:27 AM

  • Driver issue for Oracle Enterprise Linux

    Hi All,
    I have just installed Oracle Enterprise Linux. I was not able to access network. After doing lspci -- i found that my ethernet conrtoller : Atheros Communications AR8151 Gigabit Ethernet.
    Can any one tell how to install driver for this ?

    What is your output of:
    <pre>
    lsb_release -d
    uname -r
    </pre>
    What kernel driver is in use or loaded regarding your Ethernet card when you check the output of lspci -v"?
    Note that Oracle Linux just like any other Red Hat Enterprise Linux is not designed for typical consumer grade Laptops and Desktop systems.
    Does your computer vendor provide any driver software for Enterprise Linux? You might be able to find 3rd party driver support using http://elrepo.org/tiki/tiki-index.php as a temporary yum software repository. Probably kmod-atl1 or similar.

  • Configure dial-up connection in Oracle Enterprise Linux Release 4-3.7.11

    Hallo!I have just finished installing Oracle Enterprise Linux Release 4-3.7.11 so that I can set up Oracle 10g on this Linux platform.
    But first I need to set up a few configurations e.g enable my OEL connect to the internet via a dial-up modem.
    I have used my modem successfully on openSUSE 11.2 and Ubuntu 9.04 but I am unable to use it on OEL.
    My ubuntu configurations are as follows
    Connection Name:ZAIN
    Number:*99#
    APN:ke.celtel.com
    How do I set up dial-up in OEL using the settings above?
    Also,simple commands to restart the OEL such as shutdown -r now are not being found when I type them in the terminal.How can this be so?
    Thanks.

    user11114098 wrote:
    But first I need to set up a few configurations e.g enable my OEL connect to the internet via a dial-up modem.Use wvdialconf to configure access.
    Use wvdial to dial out using the modem, authenticate, and have it launch the pppd daemon for creating an IP connection via the modem.
    If you want to configure manually, you will need to edit the files pap-secrets and chap-sercrets in +/etc/ppp+. Then you also need a unique config file for your connection defined in the +/etc/ppp/peers+ directory.
    These files are fairly simple to edit. The secret files contains your ISP authentication details. The peers file the phone number and account name (from the secret files) to use. wvdialconf should configure this accordingly though.
    There's lot of details available on the web - suggest you google.

  • Error during Oracle installation in Oracle Enterprise Linux

    Hi All,
    I was trying to install Oracle 10g in Oracle Enterprise Linux, and I'm getting the following error when I give the command *./runInstall*.
    [oracle@localhost database]$ ./runInstaller -responseFile /home/oracle/database/response/enterprise1.rsp -nowelcome
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
    Passed
    All installer requirements met.
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-04-05_12-58-11AM. Please wait ...[oracle@localhost database]$ Oracle Universal Installer, Version 10.2.0.1.0 Production
    Copyright (C) 1999, 2005, Oracle. All rights reserved.
    Can't connect to X11 window server using '127.0.0.1:0.0' as the value of the DISPLAY variable.
    127.0.0.1:0.0
    127.0.0.1:0.0
    OUI-10025:Unable to start an interactive install session because of the following error:Can't connect to X11 window server using '127.0.0.1:0.0' as the value of the DISPLAY variable. The DISPLAY environment variable should be set to <hostname or IP address>:<screen>, where the <screen> is usually '0.0'.
    OUI-10026:Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
    - For csh: % setenv DISPLAY 192.168.1.128:0.0
    - For sh, ksh and bash: $ DISPLAY=192.168.1.128:0.0; export DISPLAY
    Use the following command to see what shell is being used:
    echo $SHELL
    Use the following command to view the current DISPLAY environment variable setting:
    echo $DISPLAY
    - Make sure that client users are authorized to connect to the X Server.
    OUI-10027:To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
    % xhost +
    To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
    % <full path to xclock... see below>
    If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
    Typical path for 'xclock': '/usr/X11R6/bin/xclock'
    I have tried to set the DISPLAY variable to my IP address, but it still gives the same issue.
    Please find the logs for the same:
    [oracle@localhost database]$ /sbin/ifconfig
    eth0 Link encap:Ethernet HWaddr 00:0C:29:95:3B:4F
    inet addr:192.168.64.128 Bcast:192.168.64.255 Mask:255.255.255.0
    inet6 addr: fe80::20c:29ff:fe95:3b4f/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:532694 errors:0 dropped:0 overruns:0 frame:0
    TX packets:288167 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:792077163 (755.3 MiB) TX bytes:16147337 (15.3 MiB)
    Interrupt:193 Base address:0x2024
    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:3280 errors:0 dropped:0 overruns:0 frame:0
    TX packets:3280 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:1739143 (1.6 MiB) TX bytes:1739143 (1.6 MiB)
    [oracle@localhost database]$ export DISPLAY=192.168.64.128:0.0
    [oracle@localhost database]$ echo $DISPLAY
    192.168.64.128:0.0
    Please suggest on what can be done as this is the last step for the Oracle installation which I'm unable to complete.
    Let me know for any more details needed.
    Thanks
    Ravi
    Ph: +919583750774

    Hi,
    Thanks for the immediate response.
    Now I'm getting the following error:
    [oracle@scondw01 database]$ ./runInstaller -force -responseFile /u01/database/response/enterprise1.rsp -silent -nowelcome
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
    Passed
    All installer requirements met.
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-04-05_09-10-03PM. Please wait ...[oracle@scondw01 database]$ Oracle Universal Installer, Version 10.2.0.1.0 Production
    Copyright (C) 1999, 2005, Oracle. All rights reserved.
    Unexpected Signal : 11 occurred at PC=0xB7C297CE
    Function=(null)
    Library=/tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/client/libjvm.so
    NOTE: We are unable to locate the function name symbol for the error
    just occurred. Please refer to release documentation for possible
    reason and solutions.
    Current Java thread:
    at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.chgrp(Native Method)
    at oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.changeGroup(OiipgBootstrap.java:1206)
    at oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.writeInvLoc(OiipgBootstrap.java:900)
    at oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.updateInventoryLoc(OiipgBootstrap.java:408)
    at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.doInvSetupOperations(OiicSessionInterfaceManager.java:400)
    at oracle.sysman.oii.oiic.OiicSilentInterfaceManager.doInvSetupOperations(OiicSilentInterfaceManager.java:679)
    at oracle.sysman.oii.oiic.OiicInvSetupWCCE.doOperation(OiicInvSetupWCCE.java:217)
    at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
    at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:1273)
    at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:289)
    at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:546)
    at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:929)
    at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:866)
    Dynamic libraries:
    08048000-08056000 r-xp 00000000 08:01 511751 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/bin/java
    08056000-08059000 rwxp 0000d000 08:01 511751 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/bin/java
    a4d43000-a4d4a000 r-xp 00000000 08:01 659354 /tmp/OraInstall2012-04-05_09-10-03PM/oui/lib/linux/liboraInstaller.so
    a4d4a000-a4d4b000 rwxp 00006000 08:01 659354 /tmp/OraInstall2012-04-05_09-10-03PM/oui/lib/linux/liboraInstaller.so
    a4d4b000-a4d88000 r-xs 00000000 08:01 659257 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/jewt4-nls.jar
    a4d88000-a4f2f000 r-xs 00000000 08:01 659256 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/jewt4.jar
    a4f2f000-a4f67000 r-xs 00000000 08:01 659275 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/OraPrereq.jar
    a4f67000-a5085000 r-xs 00000000 08:01 659274 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/classes12.jar
    a5085000-a508d000 r-xs 00000000 08:01 659272 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/swingaccess.jar
    a508d000-a50da000 r-xs 00000000 08:01 659255 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/ewt3-nls.jar
    a50da000-a50e0000 r-xs 00000000 08:01 659273 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/ewt3-swingaccess.jar
    a50e0000-a5365000 r-xs 00000000 08:01 659254 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/ewt3.jar
    a5365000-a538c000 r-xs 00000000 08:01 659259 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/help4-nls.jar
    a538c000-a53f1000 r-xs 00000000 08:01 659258 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/help4.jar
    a53f1000-a54a6000 r-xs 00000000 08:01 659271 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/oracle_ice.jar
    a54a6000-a54c3000 r-xs 00000000 08:01 659269 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_zh_TW.jar
    a54c3000-a54e0000 r-xs 00000000 08:01 659268 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_zh_CN.jar
    a54e0000-a54fe000 r-xs 00000000 08:01 659267 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_pt_BR.jar
    a54fe000-a551b000 r-xs 00000000 08:01 659266 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_ko.jar
    a551b000-a5537000 r-xs 00000000 08:01 659265 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_ja.jar
    a5537000-a5554000 r-xs 00000000 08:01 659264 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_it.jar
    a5554000-a5571000 r-xs 00000000 08:01 659263 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_fr.jar
    a5571000-a558e000 r-xs 00000000 08:01 659262 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_es.jar
    a558e000-a55ad000 r-xs 00000000 08:01 659261 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp_de.jar
    a55ad000-a55c9000 r-xs 00000000 08:01 659260 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstHelp.jar
    a55c9000-a55ea000 r-xs 00000000 08:01 659270 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/InstImages.jar
    a55ea000-a55f0000 r-xs 00000000 08:01 659345 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/ojmisc.jar
    a55f0000-a56ce000 r-xs 00000000 08:01 659342 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/emCfg.jar
    a56ce000-a56e1000 r-xs 00000000 08:01 659344 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/orai18n-mapping.jar
    a56e1000-a57e1000 r-xs 00000000 08:01 659343 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/orai18n-collation.jar
    a57e1000-a5866000 r-xs 00000000 08:01 659341 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/xml.jar
    a5866000-a5868000 r-xs 00000000 08:01 659349 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/OraInstallerNet.jar
    a5868000-a5876000 r-xs 00000000 08:01 659350 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/share.jar
    a5876000-a593d000 r-xs 00000000 08:01 659347 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/srvm.jar
    a593d000-a5a65000 r-xs 00000000 08:01 659346 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/xmlparserv2.jar
    a5a65000-a5a72000 r-xs 00000000 08:01 659351 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/oneclick.jar
    a5a72000-a5e0f000 r-xs 00000000 08:01 659348 /tmp/OraInstall2012-04-05_09-10-03PM/oui/jlib/OraInstaller.jar
    a5e0f000-a5e2b000 r-xs 00000000 08:01 642421 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/ext/sunjce_provider.jar
    a5e2b000-a5ee6000 r-xs 00000000 08:01 642420 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/ext/localedata.jar
    a5ee6000-a5ef3000 r-xs 00000000 08:01 642419 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/ext/ldapsec.jar
    a5ef3000-a5ef6000 r-xs 00000000 08:01 642418 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/ext/dnsns.jar
    a60fa000-a62fa000 r-xp 00000000 08:01 330503 /usr/lib/locale/locale-archive
    b5bfb000-b618a000 r-xs 00000000 08:01 511764 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/charsets.jar
    b618a000-b619b000 r-xs 00000000 08:01 511802 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/jce.jar
    b619b000-b6274000 r-xs 00000000 08:01 511803 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/jsse.jar
    b6274000-b628a000 r-xs 00000000 08:01 196225 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/sunrsasign.jar
    b62d4000-b79c2000 r-xs 00000000 08:01 511810 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/rt.jar
    b79c2000-b79d6000 r-xp 00000000 08:01 659151 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/libzip.so
    b79d6000-b79d9000 rwxp 00013000 08:01 659151 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/libzip.so
    b79d9000-b79f9000 r-xp 00000000 08:01 659136 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/libjava.so
    b79f9000-b79fb000 rwxp 0001f000 08:01 659136 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/libjava.so
    b79fb000-b7a0b000 r-xp 00000000 08:01 659150 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/libverify.so
    b7a0b000-b7a0d000 rwxp 0000f000 08:01 659150 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/libverify.so
    b7a0d000-b7a16000 r-xp 00000000 08:01 344676 /lib/libnss_files-2.3.4.so
    b7a16000-b7a17000 r-xp 00008000 08:01 344676 /lib/libnss_files-2.3.4.so
    b7a17000-b7a18000 rwxp 00009000 08:01 344676 /lib/libnss_files-2.3.4.so
    b7a1f000-b7a23000 rwxs 00000000 08:01 249425 /tmp/hsperfdata_oracle/5761
    b7a23000-b7a44000 r-xp 00000000 08:01 344698 /lib/tls/libm-2.3.4.so
    b7a44000-b7a45000 r-xp 00020000 08:01 344698 /lib/tls/libm-2.3.4.so
    b7a45000-b7a46000 rwxp 00021000 08:01 344698 /lib/tls/libm-2.3.4.so
    b7a46000-b7a58000 r-xp 00000000 08:01 344660 /lib/libnsl-2.3.4.so
    b7a58000-b7a59000 r-xp 00011000 08:01 344660 /lib/libnsl-2.3.4.so
    b7a59000-b7a5a000 rwxp 00012000 08:01 344660 /lib/libnsl-2.3.4.so
    b7a5e000-b7a66000 r-xp 00000000 08:01 659161 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/native_threads/libhpi.so
    b7a66000-b7a67000 rwxp 00007000 08:01 659161 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/native_threads/libhpi.so
    b7a67000-b7e6d000 r-xp 00000000 08:01 659159 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/client/libjvm.so
    b7e6d000-b7e88000 rwxp 00405000 08:01 659159 /tmp/OraInstall2012-04-05_09-10-03PM/jre/1.4.2/lib/i386/client/libjvm.so
    b7e9c000-b7fc1000 r-xp 00000000 08:01 344696 /lib/tls/libc-2.3.4.so
    b7fc1000-b7fc3000 r-xp 00124000 08:01 344696 /lib/tls/libc-2.3.4.so
    b7fc3000-b7fc5000 rwxp 00126000 08:01 344696 /lib/tls/libc-2.3.4.so
    b7fc7000-b7fc9000 r-xp 00000000 08:01 344656 /lib/libdl-2.3.4.so
    b7fc9000-b7fca000 r-xp 00001000 08:01 344656 /lib/libdl-2.3.4.so
    b7fca000-b7fcb000 rwxp 00002000 08:01 344656 /lib/libdl-2.3.4.so
    b7fcc000-b7fda000 r-xp 00000000 08:01 344700 /lib/tls/libpthread-2.3.4.so
    b7fda000-b7fdb000 r-xp 0000d000 08:01 344700 /lib/tls/libpthread-2.3.4.so
    b7fdb000-b7fdc000 rwxp 0000e000 08:01 344700 /lib/tls/libpthread-2.3.4.so
    b7fe9000-b7ffe000 r-xp 00000000 08:01 344641 /lib/ld-2.3.4.so
    b7ffe000-b7fff000 r-xp 00015000 08:01 344641 /lib/ld-2.3.4.so
    b7fff000-b8000000 rwxp 00016000 08:01 344641 /lib/ld-2.3.4.so
    Heap at VM Abort:
    Heap
    def new generation total 576K, used 387K [0xa6550000, 0xa65f0000, 0xa70d0000)
    eden space 512K, 69% used [0xa6550000, 0xa65a8f48, 0xa65d0000)
    from space 64K, 50% used [0xa65d0000, 0xa65d8080, 0xa65e0000)
    to space 64K, 0% used [0xa65e0000, 0xa65e0000, 0xa65f0000)
    tenured generation total 1408K, used 1090K [0xa70d0000, 0xa7230000, 0xafb50000)
    the space 1408K, 77% used [0xa70d0000, 0xa71e0938, 0xa71e0a00, 0xa7230000)
    compacting perm gen total 4864K, used 4693K [0xafb50000, 0xb0010000, 0xb3b50000)
    the space 4864K, 96% used [0xafb50000, 0xaffe5698, 0xaffe5800, 0xb0010000)
    Local Time = Thu Apr 5 21:10:05 2012
    Elapsed Time = 0
    # HotSpot Virtual Machine Error : 11
    # Error ID : 4F530E43505002EF
    # Please report this error at
    # http://java.sun.com/cgi-bin/bugreport.cgi
    # Java VM: Java HotSpot(TM) Client VM (1.4.2_08-b03 mixed mode)
    # An error report file has been saved as hs_err_pid5761.log.
    # Please refer to the file for further information.
    Please let me know what can be the solution.
    thanks
    Ravikanth

  • Problems dual booting Windows Vista with Oracle Enterprise Linux 4

    I tried dual booting my sony laptop which came pre installed with windows Vista,After a successful installation,windows Vista boots fine,but Oracle enterprise linux just stops booting at this point " Starting Udev...................................................(OK)
    Initializing hardware....Storage network"
    It's posibly a hardware compatibility problem but I dont know why I get stuck at this point.Can anyone help please?

    hi,
    r u getting this error while installing oel or after installation?
    which version of oel u r installing?
    u may get this error probably due to hard disk (usually sata) compatility with linux.
    --Regards
    Xaheer

  • Yast installation problem on Oracle Enterprise Linux Rel 5 Upd 2

    Hi,
    I installed Oracle Enterprise Linux Rel 5 Upd 2 on a new server (Intel 64 bit) with the downloads from oracle
    (Enterprise-R5-U2-Server-x86_64-disc1.iso till Enterprise-R5-U2-Server-x86_64-disc6.iso).
    Then I wanted to install Yast for administering my machine and downloaded yast_el5_x86_64.tar, again from Oracle. Running the Yast install routine it required the perl-Digest-SHA package. I downloaded that from Oracle ULN and installed it.
    Now, running the Yast install routine again, I get a bunch of warnings and errors about failed dependencies and NOKEY's.
    Here I copied a part of it:
    warning: liby2util-2.13.8-0.12.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
    warning: blocxx-1.0.0-17.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
    warning: libxcrypt-2.4-12.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
    warning: testutf8-1.0-1.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
    warning: yast2-core-2.13.39-0.3.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
    warning: hwinfo-13.57-2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
    warning: yast2-hardware-detection-2.13.7-0.9.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
    warning: libzypp-2.15.10-0.4.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
    error: Failed dependencies
    +     libboost_filesystem.so.2()(64bit) is needed by libzypp-2.15.10-0.4.x86_64+
    +     libboost_regex.so.2()(64bit) is needed by libzypp-2.15.10-0.4.x86_64+
    warning: yast2-pkg-bindings-2.13.117-0.13.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
    error: Failed dependencies:
    +     libzypp >= 2.4.0 is needed by yast2-pkg-bindings-2.13.117-0.13.x86_64+
    +     libzypp.so.215()(64bit) is needed by yast2-pkg-bindings-2.13.117-0.13.x86_64+
    warning: yast2-2.13.104-1.0.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
    error: Failed dependencies:
    +     yast2-pkg-bindings >= 2.13.111 is needed by yast2-2.13.104-1.0.x86_64+
    warning: yast2-network-2.13.98-0.7.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
    error: Failed dependencies:
    +     yast2 >= 2.13.90 is needed by yast2-network-2.13.98-0.7.x86_64+
    warning: perl-Parse-RecDescent-1.80-259.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
    warning: perl-gettext-1.05-13.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
    warning: perl-X500-DN-0.28-133.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
    warning: yast2-pam-2.13.5-0.11.noarch.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
    error: Failed dependencies:
    +     yast2 is needed by yast2-pam-2.13.5-0.11.noarch+
    warning: yast2-mail-aliases-2.13.8-0.11.noarch.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
    error: Failed dependencies:
    +     libzypp.so.215()(64bit) is needed by yast2-perl-bindings-2.13.11-0.17.x86_64+
    +     yast2 is needed by yast2-security-2.13.7-0.11.noarch+
    +     yast2-pam is needed by yast2-security-2.13.7-0.11.noarch+
    +     yast2 is needed by yast2-ldap-client-2.13.27-0.11.noarch+
    +     yast2-network is needed by yast2-ldap-client-2.13.27-0.11.noarch+
    +     yast2-pam >= 2.13.5 is needed by yast2-ldap-client-2.13.27-0.11.noarch+
    +     yast2 >= 2.13.70 is needed by yast2-country-2.13.52-0.9.x86_64+
    +     yast2 >= 2.13.85 is needed by yast2-installation-2.13.192-0.4.noarch+
    +     yast2-network is needed by yast2-installation-2.13.192-0.4.noarch+
    +     yast2-pkg-bindings >= 2.13.101 is needed by yast2-installation-2.13.192-0.4.noarch+
    +     yast2 is needed by yast2-users-2.13.55-0.4.x86_64+
    +     yast2-pam is needed by yast2-users-2.13.55-0.4.x86_64+
    What's wrong here and what is to do?
    I only installed packages from Oracle on a newly installed machine. And I didn't find documentation regarding these problems.
    Any help would be greatly appreciated,
    Roger

    error: Failed dependencies
    + libboost_filesystem.so.2()(64bit) is needed by libzypp-2.15.10-0.4.x86_64+
    + libboost_regex.so.2()(64bit) is needed by libzypp-2.15.10-0.4.x86_64+As error message clearly states you need to install additional OS packages (included in installation media or in online repository) to solve the dependencies.

  • Installation problem oracle 11g R2 on oracle enterprise linux 5 update 5

    hello support,
    i've installation problems with oracle 11g R2 on oracle enterprise linux 5 update 5. In the section "ORACLE Net-Konfigurationsassisten" the failure "[INS-20802] Oracle NET-Konfigurationsassistent not success". What's wrong? I've followed the instructions on http://www.oracle.com/technology/pub/articles/smiley-11gr1-install.html
    I've heard the problem can occur with problems in /etc/hosts? My /etc/hosts is configured:
    # Do not remove the following line, or various programs
    # that require network functionality will fail.
    127.0.0.1          oracle localhost.localdomain localhost
    ::1          localhost6.localdomain6 localhost6
    is this ok? what can I do to bring the database-installation to success?
    Thank's for help ;-)
    Edited by: user5782904 on 09.05.2010 14:06

    Here I paste you the configuration of my latest linux box which has a similar environment like yours.
    # hostname
    vmrhel6032.quist.ch
    # domainname
    (none)
    # cat /etc/hosts
    192.168.1.205 vmrhel6032 vmrhel6032.quist.ch
    127.0.0.1     localhost  localhost.localdomain localhost4 localhost4.localdomain4
    ::1           localhost  localhost.localdomain localhost6 localhost6.localdomain6
    # cat /etc/sysconfig/network
    NETWORKING=yes
    HOSTNAME=vmrhel6032.quist.ch
    # cat /etc/sysconfig/network-scripts/ifcfg-eth0
    # Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
    DEVICE=eth0
    HWADDR=00:0C:29:6A:98:70
    ONBOOT=yes
    NETWORK=192.168.1.0
    NETMASK=255.255.255.0
    IPADDR=192.168.1.205
    #Thanks to your post I noted that the hostname consist already of my domain entry. Try your configuration first without domain entry. It should look like:
    # hostname
    vmrhel6032
    # domainname
    (none)
    # cat /etc/hosts
    192.168.1.205 vmrhel6032
    127.0.0.1     localhost  localhost.localdomain localhost4 localhost4.localdomain4
    ::1           localhost  localhost.localdomain localhost6 localhost6.localdomain6
    # cat /etc/sysconfig/network
    NETWORKING=yes
    HOSTNAME=vmrhel6032
    # cat /etc/sysconfig/network-scripts/ifcfg-eth0
    # Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
    DEVICE=eth0
    HWADDR=00:0C:29:6A:98:70
    ONBOOT=yes
    NETWORK=192.168.1.0
    NETMASK=255.255.255.0
    IPADDR=192.168.1.205
    #Otherwise use the first example and don't forget to restart your server resp. the network service. ;)

  • Oracle Enterprise Linux 6.1 Installation Fails during Disk Partitioning

    Hi,
    I've tried to install Oracle Enterprise Linux 6.1 by creating a Virtual Machine using Oracle VM Virtual Box in my laptop with Window XP host OS (NTFS filesystem), by following the below steps.
    1) Installed Oracle VM Virtual Box
    2) Created a new Virtual machine using a virtual box by specifying the two .iso images i.e OracleLinux-R6-U1-Server-i386-dvd.iso and boot.iso as the boot device and by specifying the following Disk files (.vdi) as follows.
    2.1) Oracle_Enterprise_Linux_6_1_Root_Disk_1.vdi - For the / (i.e Root) partition - Dynamically expanded storage - 10 GB - ext4
    2.2) Oracle_Enterprise_Linux_6_1_Swap_Disk_1.vdi - For the swap partition - Dynamically expanded storage - 10 GB - swap
    2.3) Oracle_Enterprise_Linux_6_1_User_Disk_1.vdi - For the /usr partition - Dynamically expanded storage - 20 GB - ext4
    2.4) Oracle_Enterprise_Linux_6_1_Home_Disk_1.vdi - For the /home partition - Dynamically expanded storage - 10 GB - ext4
    But while installing OEL 6.1 after specifying the partitions, the installer get hung and throws an error as bug while creating the ext4 filesystem on /dev/sda1.
    I tried to specify the default 8 GB for all the above four partitions, the installer successfully continues without any issues. But if i specify any partition more than 8 GB, it fails.
    Is there anyway I can solve this problem by creating the above specified partitions with the above size ? Why does it fail if i specify any size more than 8 GB ?
    Thanks
    Harish

    8 GB is a common limit for systems were the boot loader or system BIOS imposes an addressable space limit for the boot partition. In such situations, the system boot partition has to fit within the first 8 GB physical boundary of the harddrive.
    Your setup seems a bit unusual. Why do you create separate disks for each Linux partition?
    Normally the Linux installer creates necessary partitions on the disk, including a /boot partition that is usually only 100 MB in size.
    What are you doing with boot.iso? You should be able to start the system from the main installation DVD or .iso image. You might also want to install x86_64 Linux, unless your hardware is really very old and does not support the 64-bit extension. You can run 32-bit software on a n 64-bit OS, but not the other way around and you will limit your software to 32-bit only.

  • Guide to installing XE and Apex on Oracle Enterprise Linux 5.3 (64 bit)

    I have just been through a time consuming and frustrating process of installing Oracle XE 10gR2 on Oracle Enterprise Linux 5.3 x86-64 and I want to share my experience so that others can benefit from it and overcome the same problems more quickly.
    Prior to starting I had installed OEL 5.3 and been using it for a few days. The system I am using is a home built box with an AMD Phenom X4 955 Black Edition, 8 Gb RAM, Highpoint RR2680 RAID controller with 4 1TB disks in a RAID5 array and an additional 320Gb HDD storing the OS. I am using KDE3.5 on the desktop.
    The main problem I encountered was with SELinux. As I eventually intend to have this system exposed on the Internet I was reluctant to switch it off despite having read extensively about the issues surrounding it and Oracle. I had several failed attempts at the installation process before succumbing to the reality that SELinux and Oracle are not happy bedfellows. I decided to switch SELinux to permissive mode having followed the advice here.
    I found a very helpful guide to installing XE on Linux here as part of the installation of an application called Spacewalk. Note that you do not need to complete the whole Spacewalk installation, but just follow the instructions in the linked page.
    Before you start you need to ensure that the UID of your oracle user is less than 500. Mine was 500, so I used the following commands to fix this:
    usermod -u 250 oracle
    find / -uid 500 -exec chown oracle {} \;
    These change the oracle UID to 250 (but check that isn't already used first!) and the find command searches for all files that were owned by oracle (but weren't after the usermod cmd) and changes them back to oracle's ownership.
    Now follow the Spacewalk instructions until you reach the Server Setup section. Before you do this you need to make a couple of changes to the script /etc/init.d/oracle-xe. I found these changes in various places, such as [link(1)|http://forums.oracle.com/forums/thread.jspa?messageID=1345771&#1345771] and [link(2)|http://dbataj.blogspot.com/2008/08/lblibrarypath-is-not-set-on-startup.html].
    Note that in link(1) the oracle-xe-selinux packages installed have the same effect as the chcon command on the shared libraries so it isn't necessary to perform this step.
    Open /etc/init.d/oracle-xe in vi (or your favourite editor) and do the following:
    line 49: change /bin/su to /sbin/runuser
    after line 52 (export PATH...) add the following lines:
    LD_LIBRARY_PATH=$ORACLE_HOME/lib:$LD_LIBRARY_PATH
    export LD_LIBRARY_PATH
    There are further changes recommended to /etc/init.d/oracle-xe in [this post|http://forums.oracle.com/forums/thread.jspa?messageID=3201491&#3201491] but I haven't done them yet.
    Having done the above changes you can now configure Oracle XE by running /etc/init.d/oracle-xe configure (as root!). As I have Apache Tomcat running on port 8080 I changed the default HTTP port to 8500 but kept the listener on its default port of 1521. Once the confuration script is done you will need to change the ports SELinux uses for Oracle as follows:
    semanage port -d -t oracle_port_t -p tcp 9000 - deletes port 9000, which is the SELinux default port for Apex
    semanage port -a -t oracle_port_t -p tcp 1521 - ensure that listener port is OK (assuming you used default of 1521, change accordingly if you didn't)
    semanage port -a -t oracle_port_t -p tcp 8500 - add the new Apex HTTP port to SELinux
    After all this running:
    semanage port -l | grep oracle
    should show you:
    oracle_port_t tcp 1521, 8500
    I ignored the TNSNAMES.ORA part of the Spacewalk instructions and proceeded with the 'Client setup on 64bit platform' and 'Configuring sqlplus' sections.
    For the latter I created a bash script which I have made available in the oracle user and my own user's home directories:
    cat > configure_oracle_10g_xe.sh
    ORACLE_HOME=/usr/lib/oracle/xe/app/oracle/product/10.2.0/server
    PATH=$PATH:$ORACLE_HOME/bin
    ORACLE_SID=XE
    export ORACLE_HOME ORACLE_SID PATH
    LD_LIBRARY_PATH=$ORACLE_HOME/lib:$LD_LIBRARY_PATH
    export LD_LIBRARY_PATH
    I did this as I intend to install other Oracle databases, e.g. 11gR2, on this box later so I didn't want to put the above in .bashrc.
    Having done the above you should be able to log into the database using sqlplus and the XE setup is complete.
    The upgrade of Apex 2.2 to Apex 3.2.1 was fairly painless so I won't go into much detail about it - just follow the instructions provided by Oracle.
    The only issue I had was right at the end of the process and is documented and answered in [this thread|http://forums.oracle.com/forums/thread.jspa?threadID=958611&tstart=0].
    That's it - I hope somebody will find this useful.

    On Oracle Metalink site, there are many documents which says that Oracle 32 bit software works on 32 bits OS and 64 bits software works on 64 bits OS. Official support is only in those combination....
    So there is no good way to help you in your case-XE is 32 bit application with hard codded compiled libraries which most of them would not work on 64 bit OS.
    Sorry
    8(
    Hope this helps

  • How to install Oracle Enterprised Linux on VMware PLayer 4

    Hi Everyone,
    My name is John and I've a small issue which I would like to share with you and hopefully, you are able to assist.
    My laptop is installed with a Window 7 Home Edition operating system and I've installed VMware-player-4.0.2. After reboot, I've also downloaded the file - V29609-01 which is the ISO file of Oracle Enterprise Linux 6.2.
    After that, I've tried to create a Virtual Machine - Oracle Enterprise Linux using the VMware Player by specifying the path and file name of the V29609-01.iso file on my local c:\ drive. I've tried it several times, but every time it just returns the message - 'pxe-e53 no boot filename received' and it just hangs there without proceeding further. Please let me know what I've done wrong and the correct steps and procedures to solve this problem as this is my first time installing a Linux operating system. Thank you for your assistance.
    Regards,
    John

    Hi,
    Can you clarify and explain what is your exact meaning of 'Are you sure you've added the ISO to the VM to boot from?'? Because the following is what I did:
    1.) Click the Create A New Virtual Machine.
    2.) Select the 'Install disc image file (iso):' option and enter the full path of the V29609-01.iso (Oracle Enterprise Linux 6.2) file that I've downloaded from https://edelivery.oracle.com/. But underneath it, that is a message saying - 'Could not detect which operating systems is in this dsic image. You will need to specify which operating system will be installed.'
    3.) Click 'Next'.
    4.) I chose "Linux' under the Guest operating system and chose 'Oracle Enterprise Linux' under the Version drop down.
    5.) Click 'Next'.
    6.) I left the Virtual machine name as 'Oracle Enterprise Linux' and click 'Next'.
    7.) I set the Maximum disk size to 300 GB and have the 'Split virtual disk into multiple files' option selected and click 'Next'.
    8.) I have the 'Power on this virtual machine after creation' checked and click 'Finish'.
    9.) A black screen displayed inside the VMware Player saying:
    'CLIENT MAC ADDR: 00 0C 289 ......
    PXE-E53: No Boot filename received
    PXE-M0F: Exiting Intel PXE ROM.
    Operating System not found
    10.) And the process just hangs there.
    Regards,
    John

  • How to install and use the Gnome-DO application in oracle enterprise Linux

    My Oracle Enterprise linux is 5.3,
    I want to install and use the Gnome-Do(http://do.davebsd.com) in my box.
    Please help me regarding this.
    With Regards
    DSK

    According to Google, Gnome-Do has known issues about CPU bugs and hogs and the latest incarnation does not seem to be available for RHEL and clones. You should have more luck with Linux Desktop distributions like Fedora and Ubuntu. Or you could try to build from source using the info at: http://do.davebsd.com/wiki/Installing_Do. Good luck - I wouldn't bother.

  • TNS-12560: TNS:protocol adapter error on Oracle Enterprise Linux

    hi,
    I am getting -
    TNS-12560: TNS:protocol adapter error when I try to connect the Db installed on Oracle Enterprise Linux from other machines.
    I made all the .bash_profile changes and created one shared listener also to check whether there is any problem with the dedicated default listener or its port.
    Please suggest the solution .
    Regards
    sumit chaudhary

    You need to open the firewall on OEL.
    Edit the contents of /etc/sysconfig/iptables file. I added the line in bold:
    # Firewall configuration written by system-config-securitylevel
    # Manual customization of this file is not recommended.
    *filter
    :INPUT ACCEPT [0:0]
    :FORWARD ACCEPT [0:0]
    :OUTPUT ACCEPT [0:0]
    :RH-Firewall-1-INPUT - [0:0]
    -A INPUT -j RH-Firewall-1-INPUT
    -A FORWARD -j RH-Firewall-1-INPUT
    -A RH-Firewall-1-INPUT -i lo -j ACCEPT
    -A RH-Firewall-1-INPUT -p icmp --icmp-type any -j ACCEPT
    -A RH-Firewall-1-INPUT -p 50 -j ACCEPT
    -A RH-Firewall-1-INPUT -p 51 -j ACCEPT
    -A RH-Firewall-1-INPUT -p udp --dport 5353 -d 224.0.0.251 -j ACCEPT
    -A RH-Firewall-1-INPUT -p udp -m udp --dport 631 -j ACCEPT
    -A RH-Firewall-1-INPUT -p tcp -m tcp --dport 631 -j ACCEPT
    -A RH-Firewall-1-INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
    -A RH-Firewall-1-INPUT -m state state NEW -m tcp -p tcp dport 22 -j ACCEPT
    *-A RH-Firewall-1-INPUT -m state state NEW,ESTABLISHED,RELATED -m tcp -p tcp dport 1521 -j ACCEPT*
    -A RH-Firewall-1-INPUT -m state state NEW -m udp -p udp dport 137 -j ACCEPT
    -A RH-Firewall-1-INPUT -m state state NEW -m udp -p udp dport 138 -j ACCEPT
    -A RH-Firewall-1-INPUT -m state state NEW -m tcp -p tcp dport 139 -j ACCEPT
    -A RH-Firewall-1-INPUT -m state state NEW -m tcp -p tcp dport 445 -j ACCEPT
    -A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited
    COMMIT
    As you can see, my listener port is 1521.
    Do not put that line after the line with REJECT keyword ( it won't work then) !
    Save and close the file. Restart iptables:
    /etc/init.d/iptables restart
    Now you can connect from the outside.
    It works on my OEL version 5 update 4.

  • OWB 10.2.0.1 installation on Oracle Enterprise Linux

    Hello Forum,
    I am installing OWB 10.2.0.1 on Oracle Enterprise Linux.
    While installation (creation of OWB reprository) i am getting following exception:
    A spawned program error. Exception = java.io.IOException: java.io.IOException: ../unix/jvm.sh: cannot execute
    oracle.wh.service.impl.assistant.ProcessEngine.processSPAWN(ProcessEngine.java:894): java.io.IOException: java.io.IOException: ../unix/jvm.sh: cannot execute
    Does anyone has faced such issues.
    Thanks in Advance.
    Regards,
    Praveen

    Hi!
    I want suggest you to investigate inside script '../unix/jvm.sh' searching for Java enviroment variables (it's possible that your enviroment is lacking of presence of some of them).
    Good luck!

Maybe you are looking for

  • New and need HELP!!!

    I bought my daughter a Nano for Christmas. I plugged it into my itunes for my shuffle. I cannot get her's to do anything. I can't get the setup assistant to work for hers. Can someone please walk me through this? Thanks.

  • Cross catalog search doesn't work for CCM 2.0

    Hi SRM gurus, We are using SRM 5.0 and CCM2.0. We created several CCM catalogs but cross catalog search doesn't work at all. In the call structure, option "cross catalog" is correctly customized. Are there additional check I have to do in order to se

  • Open more than one File in Forms

    Hi, my Question is if there is a possibility to open more Files(Text-Files) then one File. That means that if I press my Button in Forms the Program should open all Files in a Folder. Can I do this with a LOOP. Example: LOOP in_file:=TEXT_IO.FOPEN('c

  • A Data Synchronization Problem

    Hi everybody, I am faced with a problem in my project, so i turn to u for help. In my project, for example, i have 3 Oracle 10.1g Servers(A,B,C), and they are running the same application, with the same database,table, and so on. But because they are

  • Is there a way to capture DDWAV with Audigy

    Hello, I am in the process of capturing audio and video from a laser disc player, and encoding the movie to DVD. While most laser discs are stereo, I do have a few that are Dolby Digital encoded. I have read on DVDRHelp.com that if I can capture the