Oracle EPM 11.1.1.3 - Assign Access Control in Shared Services for filters

We are using 11.1.3 version of EPM.
We have configured Essbase with Shared Services.
When I try to click Assign Access Control , it gives "loading.." thats it. Nothing else.
I have registered the application from EAS with Shared Services
Could you pelase suggest what I can do assign filters to users.
cheers,

Hi,
Provision the user with which you are logging into shared services as an Esssbase User and try.May this will solve your issue
Thanks.
Edited by: user9976039 on Oct 23, 2009 12:57 PM

Similar Messages

  • "Assign Access Control" returns error for essbase apps in shared services

    Hello,
    I installed and configured Oracle EPM 11.1.2 (Foundation, Essbase, Planning, Reporting&Analysis):
    OS: Windows Server 2008 Sp2 (32bit)
    Default Installation with default ports,
    Installation of all components on the same server,
    no clustering
    EPM System Diagnostic says that everything is OK.
    Now I want to assign filter access for an essbase database in the Shared Services.
    Starting the menu item "Assign Access Control" in Shared Services returns the following error:
    Error 404--Not Found
    From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
    +10.4.5 404 Not Found+
    The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
    +....+
    Can anybody help ???
    best regards,
    Nicole

    Hello,
    here's what I found out so far:
    I get the error if I start the shared services console via the URL "http://servername:port/interop/index.jsp" and then select the "assign access control" for an essbase database.
    If I start the shared services console via the workspace everything works fine.
    Does anybody know what to do so that it also works if I start the shared services console via URL?
    best regards,
    Nicole

  • Shared Services Assign Access Control for Essbase

    Hi we have a used who has his provisioning in form of filters in essbase group. I tried assigning his filter to thim through Assign Access Control in shared services. I'm able to see the user and also the the filter I created for the user but when I try to assign it to him and save it is really not getting assigned. It still stays the user doesnot have any filters assigned to his account. Am I missing anything.
    Thank you.

    Have you given maxl a try:
    grant filter appname.dbname.filtername to user;
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • I have problems with the Assign Access Control in HFM

    I have problems when I want assign Access Control by Shared Services in application HFM. I login with user admin and send me this message
    Processing Error:
    Description: Invalid argument.
    Code: -2147220951
    Trace: Number:-2147220951
    Description:
    Source:General Security Error
    Page:
    Actor: General Security Error
    Anyone can't help me

    I've seen this error when the application isn't registered properly. Try re-registering via Workspace.

  • Problem with shared services,, cannot load "assign access control"

    i m using 11.1.1.3 version of EPM.
    I have configured Essbase with Shared Services.
    When I do right click on application on shared services and select "Assign Access Control" , it gives "loading.." .it remains same for hours..
    I re configured essbase ,, but problem remained same...
    Could you please suggest what I can do assign filters to users.

    Have you given maxl a try:
    grant filter appname.dbname.filtername to user;
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Assign Access Control HTTP 404

    The assign access control throws the http 404 error when i try to provision from shared services. It however works from workspace. Is this a known issue on 11.1.2.2? If there are any ways to make it work, Please post.

    ak123 wrote:
    Its the same when I try from both port 28080 and 9000.So are you running the embedded http server on port 9000? if not and you are using OHS then try accessing Shared Services through that port e.g. http://<sharedservices>:19000/interop/index.jsp
    Actually I am not sure that matters with HFM and you can go direct through 28080 or 19000, worth a try, if not maybe it just needs registering again as Pablo said.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • "Assign access control" not appearing under Essbase in shared services

    Hi Everyone,
    Can anyone point out the reason behind this? This is leading to all sorts of problems. Configuration is as follows:
    App Server: Foundation, EAS, Planning, Reporting, Web Analysis, Workspace on Tomcat
    DB Server: Essbase and SQL Server
    Essbase is on Shared Services mode.
    This is actually very urgent. Would be grateful for any help.
    Thanks,
    Sayantan

    This has been posted in the essbase forum > "Assign access control" not appearing under Essbase in shared services
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Unable to use the Assign Access Control feature in shared services

    Hi,
    When I try to right click on the essbase applicaiton in Shared Services to assign access control( to assign a new filter) I keep getting the following error
    " Internet cannot display the webpage" message with the following
    This problem can be caused by a variety of issues, including:
    Internet connectivity has been lost.
    The website is temporarily unavailable.
    The Domain Name Server (DNS) is not reachable.
    The Domain Name Server (DNS) does not have a listing for the website's domain.
    There might be a typing error in the address.
    If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section
    All the services are running file and I can create new users/ groups and also perform appication migration.
    I'm using Hyperion 11.1.3.24 on windows 2003 r2.
    Any help is appreciated. Thanks.
    Regards

    vs wrote:
    John,
    I tried the refresh button and nothing appears. I have created a group and gave it filter access. Now I'm trying to attach that filter to the group.
    Appreciate your help.Can we replace backup .sec file for shared services?
    For example: In planning if the .sec file corrupted then we replaced with old .sec file...rite...the same way can we do it in shared services?
    I know if we replace the old sec in planning...it will take old securities only...
    Edited by: Prabhas on Feb 12, 2013 9:27 PM

  • Assign access control,http 404 error

    Hi,
    when i right click on assign access control,i receive the following error:
    The page cannot be found
    The page you are looking for might have been removed, had its name changed, or is temporarily unavailable.
    Please try the following:
    If you typed the page address in the Address bar, make sure that it is spelled correctly.
    Open the server111:19000 home page, and then look for links to the information you want.
    Click the  Back button to try another link.
    Click  Search to look for information on the Internet.
    HTTP 404 - File not found
    Internet Explorer
    Can you help me in this regard ?
    Thanks,
    ColDFire

    ak123 wrote:
    Its the same when I try from both port 28080 and 9000.So are you running the embedded http server on port 9000? if not and you are using OHS then try accessing Shared Services through that port e.g. http://<sharedservices>:19000/interop/index.jsp
    Actually I am not sure that matters with HFM and you can go direct through 28080 or 19000, worth a try, if not maybe it just needs registering again as Pablo said.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Assigning control in Shared Services.

    Hi Guys,
    This is a easy one, i simply forgot. I have a group (example GroupA) with existing users and filters already in place. I would like to add a new user (example UserA) to the group and assign control in Shared Services 11.1.2.1. After adding the user to the group, do I:
    a) Search by groupname for GroupA and assign control to it?
    or B) Search by username for UserA and assign control to the user?
    Silly question but im in a serious brain freeze right now. Thanks in Advance

    Are you filters assigned by group or user, if they are by group and you previously assigned them then the filters should already be in place, if it is by user then assign the filters to the user.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Error in shared services when trying to assign access control

    Hi,
    EPM 11.1.2 on windows 7 64 bit.
    I can connect to Essbase server with Administration console.
    In shared services, after clicking on demo application for example, we get an error: "unable to connect". And we cannot get Artifact lilst.
    Any idea please ?

    user643304 wrote:
    Hi,
    EPM 11.1.2 on windows 7 64 bit.
    Any idea please ?Try installing on a supported OS
    http://www.oracle.com/technetwork/middleware/bi-foundation/hyperion-supported-platforms-085957.html
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Problems using access control in sender agreement for SOAP adapter 7.1

    I am trying to use Access Control Lists to restrict user access to web services/interfaces which are exposed via PI. This can be configured via the Integration Builder Directory using the u201CAssigned Usersu201D tab of both Communication Components (Business System) and Sender Agreements.
    The configuration is via the above mentioned components. However, I understand that itu2019s the adapters which at runtime are responsible for actually applying these checks.
    I have been having problems getting the access control to work using a setup involving a SOAP adapter of type SAP BASIS 7.10.
    The symptom of the problem is that although the access control works as expected at the Business System level, any settings at the Sender Agreement level appear to have absolutely no effect whatsoever.
    I have confirmed that I have no problems if I use an adapter of type SAP BASIS 7.00. However, I really need to get this working on 7.1.
    I have looked on the SAP support portal but can not find any notes that relate to this.
    Has anyone else had a similar problem? And have you found a fix for it?
    Any suggestions would be welcome.
    Edited by: Malcolm Dingle on Jun 17, 2009 1:08 PM

    Hi Shai,
    Please have a look at the following link and see if it helps you .
    It deals with SOAP adapter installation and activation 
    Re: SOAP adapter installation and activation
    Best Regards
    Edited by: Prakash Bhatia on May 8, 2009 11:51 AM

  • Regarding Associating Company access directory to shared services

    Hi All,
    I have a requirement to associate active directory of company to shared services and assign those user ids to Essbase login ( i mean your NT login has to be Essbase login) If any one have any idea please let me know.
    Thanks,
    Ramesh.

    Hi,
    Configuring Shared Services to use external directories is all documented here .
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • [SOLVED] xhost access control does not work for specified users

    After last upgrade of xorg to v1.17.1-1 I get message: "unable to open display ":0" " when trying to run any window application as user specified in xhost. My xhost list looks like:
    access control enabled, only authorized clients can connect
    SI:localuser:steam
    SI:localuser:root
    But if I disable access control for everyone by invoking "xhost +" applications run on another accounts without problems. Does anyone has that problem too?
    Last edited by slx (2015-02-22 12:24:17)

    slx wrote:I see that fix is pending http://lists.x.org/archives/xorg-devel/ … 45644.html
    Can you test package here http://pkgbuild.com/~lcarlier/test/ ?

  • Shared Services: "assign access control" causes error...

    ..."Unable to contact the application. Please contact the server administrator."
    I need to add users to predefined essbase filters and because I am using Shared Services I have to do this in Shared Services (Projects) and not directly in Essbase.
    The problem is that this behaviour is not a general problem but for a couple of cubes.
    Does anybody know this problem?!
    Thanks!!!!
    André

    Have you given maxl a try:
    grant filter appname.dbname.filtername to user;
    Cheers
    John
    http://john-goodwin.blogspot.com/

Maybe you are looking for