Oracle ERP 11.5.10.2 and Oracle ERP R12 (12.1.1) on same linux4 machine.

I Have to install Oracle ERP R12 on a Linux machine but the issue is that we are already running ERP 11.5.10.2 on same Machine, my Question is that how we will take care of Kernel parameters for both the releases on same machine as R12 suggests different Kernel parameters to be set, or can we run R12 on the same Kernel Parameters which are already set for 11.5.10.2, please help me out experts, this Question is for Linux4 machine.
Thanks
Mehboob

Hi,
If the values for R12 are higher then you need to adjust the kernel parameters values and it should work for both 11i and R12.
Thanks,
Hussein

Similar Messages

Install SAP ERP 6.0 with Linux and Oracle RAC

Hi Guru,
I want to install SAP ERP 6.0 with Linux and Oracle RAC. Is this possible?
Where do I find information?
Thanks,
Hugo.

Hello Hugo,
You can use either RAC or dataguard. On note [105047|http://service.sap.com/sap/support/notes/105047]:
14. Data Guard
    o You can use "Physical Standby".
    o You cannot use "Logical Standby".
    o You can use Data Guard Broker.
    o You can use Maximum Performance Mode, Maximum Availability Mode and Maximum Protection Mode.
    o In the case of Maximum Availability and Maximum Protection, you must pay particular attention to a fast network connection in order to avoid performance problems.
    o Maximum Protection causes the primary database to terminate if problems occur in the standby database.
60. Real Application Cluster (RAC)
    o You can use this feature in accordance with Note 527843.
Regards,
Eduardo Rezende

Differences between Oracle 8i for a UNIX Platform and Oracle 8i for a Linux Platform

Hello,
J would like to know if there are some differences between Oracle 8i for a UNIX Platform and Oracle 8i for a Linux Platform.
I know that there are some differences on Oracle 8i Parallel Server and i know that some products are not include like precompiler (Mod*Ada, Pro*FORTRAN) on a Linux Platform.
Thank you.

We have installed Oracle 8i on Solaris 8 and it had a great performance, of course that the hardware and licence invested here was costed my the office where i work. Personaly i'd installed linux reh hat 8 and oracle 8i, imagine that, it could be implemented by any individual that has the time to do so.
By buyinng from a company that has a good background you could be sure that you will have support.
Bottom line, if you have the $ to buy great hardware go for a unix platform. But if you don't a Red Hat Linux Server Licence with a 1 year sopport and Oracle data base is about 3500Dls.
Visit www.red-hat.com
Rewards... Bye

Different between Oracle 8.1.7.0.0 and Oracle 8.1.7.2 ?

1) Hi all, i have some doubt about the oracle versioning technique. For example, i had installed oracle 8.1.7 release 3 in a SUN Solaris version 8 and the database character set is in UTF-8. Then i select sql : "Select * from product_component_version" and the result is "Oracle8i Enterprise Edition 8.1.7.0.0 ". What does that means ? Our DBA in another location had installed the oracle 8.1.7 release 2 in their db server with the same OS and same database character set which is UTF-8. But the result from the "Select * from product_component_version" is "Oracle8i Enterprise Edition 8.1.7.2 ".
So as a conclusion, i had confused about the oracle versioning technique, can somebody please explain to me ?
2) My second problem is actually related to problem stated above (1). In the Oracle 8.1.7 release 2 database,
when i select a clob/blob value for update, i sometimes encountered the problem as follows but in our Oracle 8.1.7 release 3 the problem didn't exist at all after investigating that all the java code and other factor remain the same but not the oracle version.
java.io.IOException: ORA-22990: LOB locators cannot span transactions
ORA-06512: at "SYS.DBMS_LOB", line 700
ORA-06512: at line 1
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.io.IOException.<init>(Compiled Code)
at oracle.jdbc.dbaccess.DBError.SQLToIOException(DBError.java)
at oracle.jdbc.driver.OracleBlobOutputStream.flushBuffer(OracleBlobOutputStream.java)
at oracle.jdbc.driver.OracleBlobOutputStream.write(Compiled Code)
This was an error log in our backend log and in the web browser it showed "Request Timeout" in both IE and Netscape. We are using J2EE, Oracle DBMS and IBM Websphere App Server for our e-commerce system.
But retrying the request sometimes may work but most of the time failed.
The above error didn't exist in our server using Oracle version 8.1.7 release 3 (8.1.7.0.0) and Oracle
version 8.1.6.0.0. But ORacle version 8.1.7.2 release 2 is encountering this problem now.
Somebody please help me on this problem, our developers and DBA had try to solved this problem one week ago but still don't know what is the cause.

Oracle 9i client would fit you well. You need ORACLE_HOME set, ORACLE_HOME/bin in the path variable and of cource check that the user has access there. Are you using OCI to connect to Oracle? JDBC thin client is a better approach, in my opinion, as it is pure java.
Oracle also provides something called "instant client", which provides connectivity only for applications.

Oracle AS 10.1.3.0 and Oracle AS 10.1.3.1

I have JDeveloper 10.1.2.0.2 and Oracle AS 10.1.3.0.0 installation on one machine. Can I install Oracle AS 10.1.3.1 on the same machine? Will they co-exist?
Thanks!

You can also patch up 10.1.3.0.0 with 10.1.3.1.0 patchset and then deploy SOA Suite components like BPEL, ESB, OWSM to the same OC4J. This will reduce the number of Oracle Homes on your machine.

Oracle 64bit Server (From JD Edwards) and oracle 32 bit client showing ORA:12560 "TNS: protocol adapter error "??

I installed 64bit Oracle successfully and was able to connect to DB using SQL Developer and sqlplus (Oracle E1local and TNSListener is up and running). I installed Oracle 32bit client and copied both tnsnames.ora and sqlnet.ora files to C:\app\Administrator\product\11.2.0\client\Network\admin. But if i am trying to access DB through Oracle 32bit client (thru cmd as sqlplus /sys as sysdba or thru sqlplus , it is throwing ORA:12560. "TNS: protocol adapter error ". (Both 62bit server and 32 client on same VM machine - Windows 2008 R2 ). I directly executed sqlplus from "C:\app\Adm\....client\bin", but it is still throwing same error and because of this JDEdward installation is not able to find if any database is running or not.!
My environment variables order: %PATH% = C:\app\Administrator\product\11.2.0\client\bin;c:\Oracle\E1Local\bin; I have seen all the previous threads and try setting ORACLE_HOME and PATH variable using CMD and tried accessing the database, but it fails all the time.
Please help me with the problem. Thanks in advance.

Thread moved from Peoplesoft forum to JD Edwards.
Nicolas.

Comparison between Oracle 10.2.0.2.0 and Oracle 10.2.0.4

Hello Gurus,
Our client is using ECC 5.0, HP-UX B.11.00 A 9000/800 ,Oracle 10.2.0.2.0
i want to know if we upgrade their oracle database to patchset 10.2.0.4
1) What benefits (performance, security, stability) client will get?
2) What is the drawback if we don't upgrade system to 10.2.0.4 ?
3) What are the issues which has been covered in Oracle release 10.2.0.4 over 10.2.0.2
4) which one SAP recommends ?
Can someone please help me to answer these questions ?
Thanks in advance!
With Regards,
kuldeep Tanwar

1) What benefits (performance, security, stability) client will get?
A new patchset includes the latest bug fixes and fixes for performance issues (if you take care about the correct parameters for the DB as well). Therefore an update of Oracle is recommended as soon as it is supported by SAP.
2) What is the drawback if we don't upgrade system to 10.2.0.4 ?
Maybe you will face issues with bugs or performance problems due to missing Oracle patches.
3) What are the issues which has been covered in Oracle release 10.2.0.4 over 10.2.0.2
Check the corresponding SAP Notes in the OSS - the notes contain quite a lot of information. Check for example note 1165319 regarding fix information for 10.2.0.4.
4) which one SAP recommends ?
SAP recommends to use the latest available and supported patch set. Check the Oracle SDN site for further information: SAP on Oracle
Kind regards

Oracle report 10g publsinng on web and Oracle Portal

I am converting a report that was using oracle OAS9i, we pass to URL(rdf file) userid/password and worked fine. We were not using Portal, even though it is installed by OAS. Now seems we have to use Oracle Portal to publish the same report. Is that right? If not how will I use report servlet to call a rdf file I assume I still need to send oracle user id/password as that is needed to run report(knowing this from old Oracle report 6.0). We really do not want to autheticate any user all users behind use the same Oracle account to print reports. Any hint?
Another thing I find that now reports are closely linked to Portal and looking at web publishing document it seems one needs to view them thru Portal. Please help me understand this why I can not just see the report as once they are processed they produce pdf that any borwser can show.

Any one??

Oracle Streams b/w MS-Access 2007 and Oracle 10g.

Can we set up Oracle Streams between MS-Access 2007 and Oracle 10g? Ms-Access as source and Oracle 10g as destination database. If so, can any one please give me little heads up with supported doc's or any source of info.

Help Help....!!!

Running Tuxedo8.0 on oracle 8.1.6 and oracle 10.2.0.2.0 on the same machine

Hello,
I have oracle 8.1.6 64 bit and oracle 10.2.0.2.0 64 bit
running on the same hp UX 11i 64-bit machine
I have installed Tuxedo 8.0 32bit on the same machine.
I have a working tuxedo 8.0 environment running against the 8.1.6 oracle
database
in the Tuxedo .../udataobj/RM file I have for the 8.1.6 environment the string
Oracle_XA:xaosw:-L${ORACLE_HOME}/lib -lclntsh
In oracle 8.1.6 home there are directories lib and lib64
but in oracle 10.2.0.2.0 home there are directories
lib and lib32
what string should I use for the oracle 10.2.0.2.0?
Oracle_XA:xaosw:-L${ORACLE_HOME}/lib32 -lclntsh maybe???
Must the string in the RM file for oracle always begin with the string
Oracle_XA?
If so is, possible at all to run the the binaries of one Tuxedo installation
against two different databases versions because the RM strings are similar in
the beginning but in 8.1.6 refer to the lib directory and in 10.2.0.2.0 refer
to the lib32 directory ?
Or do I need to have two installations of tuxedo8.0 binaries on the machine?
I have tried to for 10.2.0.2.0 the line (the Ora10_XA is only a try...)
Ora10_XA:xaosw:-L${ORACLE_HOME}/lib32 -lclntsh
in the RM file but when starting tuxedo I get:
$ cat /mnt04/edu/ressu/bin/xa_NULL06092006.trc
ORACLE XA: Version 10.2.0.1.0. RM name = 'Oracle_XA'.
111035.16584.0:
xaogetmod: XAER_INVAL; Invalid xa_info string.
Any comments on the matter appreciated.
rgds,
Jyri

Jyri,
The information before the first colon in the $TUXDIR/udataobj/RM file is
only used by the buildtms, buildserver, and buildclient programs to find the
line corresponding to the value of the -r option, so it should be OK to
specify different values for Oracle 8.1.6 and Oracle 10.2.0.2.0.
The information specfied in the OPENINFO string in the *GROUPS section of
the TUXCONFIG file must be of the form
OPENINFO="ORACLE_XA:Oracle_XA+...."
The strings ORACLE_XA and Oracle_XA cannot be changed, except for case. The
"...." can be replaced with parameters such as
SqlNet=NAMESesTm=100+LogDir=.+MaxCur=5 or whatever is used in your
applicatino. The "xaogetmod: XAER_INVAL: Invalid xa_info string" error you
are getting is due to an incorrect OPENINFO parameter.
If you are running a 32-bit version of Tuxedo you must link with the
${ORACLE_HOME}/lib32 library on 10gR2; if you are using a 64-bit version of
Tuxedo you must link with ${ORACLE_HOME}/lib library. The procedure is
similar for Oracle 8 except that it seems that the lib directory may be the
32-bit library in that version of Oracle.
32-bit and 64-bit binaries cannot be mixed under a single TUXDIR, but it is
possible to use multiple RMs or multiple versions of the same RM on the same
machine.
The syntax of the open string and the list of libraries to link with is
specified in the "Oracle Database Application Developer's Guide -
Fundamentals" in the "Developing Applications with Oracle XA" chapter.
<Jyri Elomaa> wrote in message news:[email protected]...
Hello,
I have oracle 8.1.6 64 bit and oracle 10.2.0.2.0 64 bit
running on the same hp UX 11i 64-bit machine
I have installed Tuxedo 8.0 32bit on the same machine.
I have a working tuxedo 8.0 environment running against the 8.1.6 oracle
database
in the Tuxedo .../udataobj/RM file I have for the 8.1.6 environment the
string
Oracle_XA:xaosw:-L${ORACLE_HOME}/lib -lclntsh
In oracle 8.1.6 home there are directories lib and lib64
but in oracle 10.2.0.2.0 home there are directories
lib and lib32
what string should I use for the oracle 10.2.0.2.0?
Oracle_XA:xaosw:-L${ORACLE_HOME}/lib32 -lclntsh maybe???
Must the string in the RM file for oracle always begin with the string
Oracle_XA?
If so is, possible at all to run the the binaries of one Tuxedo
installation
against two different databases versions because the RM strings are
similar in
the beginning but in 8.1.6 refer to the lib directory and in 10.2.0.2.0
refer
to the lib32 directory ?
Or do I need to have two installations of tuxedo8.0 binaries on the
machine?
I have tried to for 10.2.0.2.0 the line (the Ora10_XA is only a try...)
Ora10_XA:xaosw:-L${ORACLE_HOME}/lib32 -lclntsh
in the RM file but when starting tuxedo I get:
$ cat /mnt04/edu/ressu/bin/xa_NULL06092006.trc
ORACLE XA: Version 10.2.0.1.0. RM name = 'Oracle_XA'.
111035.16584.0:
xaogetmod: XAER_INVAL; Invalid xa_info string.
Any comments on the matter appreciated.
rgds,
Jyri

Differences between Oracle 8i for a UNIX Platform and a Linux Platform

I want to know the differences between Oracle 8i for a UNIX Platform and Oracle 8i for a Linux Platform. And which platform is better?
Thanks

We have installed Oracle 8i on Solaris 8 and it had a great performance, of course that the hardware and licence invested here was costed my the office where i work. Personaly i'd installed linux reh hat 8 and oracle 8i, imagine that, it could be implemented by any individual that has the time to do so.
By buyinng from a company that has a good background you could be sure that you will have support.
Bottom line, if you have the $ to buy great hardware go for a unix platform. But if you don't a Red Hat Linux Server Licence with a 1 year sopport and Oracle data base is about 3500Dls.
Visit www.red-hat.com
Rewards... Bye

Directory Setup for RAC and Oracle Restart

I have three database installations that I'd like some insight on the initial directory structure and permissions. The three installations are:
1) Prod RAC - OEL 5U2, 11.2.0.2 Grid Infrastructure, 11.2.0.2 DB EE with RAC option
2) Test RAC - OEL 5U2, 11.2.0.2 Grid Infrastructure, 11.2.0.2 DB EE with RAC option
3) Single Instance - OEL 5U2, 11.2.0.2 Grid Infrastructure Standalone (Oracle Restart), 11.2.0.2 DB EE
The they all have two users GRID (for Grid Infrastructure Software Owner) and ORACLE (for Oracle Database Software Owner).
We had a consultant install the databases. It's very weird since we have an inconsistency in directories and permission. I want to understand the inconsistency between RAC installations as well as Oracle Restart Install.
SEE BELOW: The two RAC servers have different owners for /u01/app/11.2.0.2 directory. The Oracle Restart Installation - Single Instance has the same owner as Prod RAC but different than Test RAC. What the consultant said was that ORACLE_BASE would be /u01/app/oracle for both Grid Infrastructure and Database installations. This was to apply to TEST/PROD RAC (3 node, 3 instances, 1 instance/node) and Oracle Restart installation. The GRID_HOME would be /u01/app/11.2.0.2/grid and ORACLE_HOME would be /u01/app/11.2.0.2/db_1. It seems like the owners aren't setup correctly. Why? I don't want problems with patching or upgrading. If this setup is technically incorrect what is the best way to setup so there's no owner/permission issues. Is it necessary to have two separate ORACLE_BASE's like /u01/app/grid?
PRODUCTION REAL APPLICATION CLUSTER (Displaying only one Node details)
$ cd app
drwxr-xr-x 6 root oinstall 4096 Feb 26 2011 .
drwxr-xr-x 3 root oinstall 4096 Apr 21 2009 ..
drwxrwxr-x 4 grid oinstall 4096 Feb 26 2011 11.2.0.2
drwxrwxr-x 2 emagent oinstall 4096 Feb 26 2011 emagent
drwxrwxr-x 9 oracle oinstall 4096 May 16 2011 oracle
drwxrwx--- 7 grid oinstall 4096 Feb 26 2011 oraInventory
$ cd 11.2.0.2
drwxrwxr-x 4 grid oinstall 4096 Feb 26 2011 .
drwxr-xr-x 6 root oinstall 4096 Feb 26 2011 ..
drwxr-xr-x 79 oracle oinstall 4096 Mar 29 2011 db_1
drwxr-xr-x 69 root oinstall 4096 Feb 26 2011 grid
$ cd ..
$ cd oracle
9 oracle oinstall 4096 May 16 2011 .
drwxr-xr-x 6 root oinstall 4096 Feb 26 2011 ..
drwxr-xr-x 4 oracle oinstall 4096 Feb 26 2011 admin
drwxr-xr-x 3 oracle oinstall 4096 Feb 26 2011 cfgtoollogs
drwxrwxr-x 2 grid oinstall 4096 Feb 26 2011 Clusterware
drwxrwxr-x 11 grid oinstall 4096 Feb 26 2011 diag
drwxrwxr-x 3 grid oinstall 4096 Feb 26 2011 hqrac03
drwxr----- 3 oracle oinstall 4096 May 16 2011 oradiag_oracle
drwxr-xr-x 3 root root 4096 Mar 13 2011 oradiag_root
TEST REAL APPLICATION CLUSTER (Displaying only one Node details)
$ cd app
drwxr-xr-x 6 root oinstall 4096 Jan 26 2011 ./
drwxr-xr-x 3 root oinstall 4096 Jan 26 2009 ../
drwxrwxr-x 4 root oinstall 4096 Jan 26 2011 11.2.0.2/
drwxrwxr-x 2 emagent oinstall 4096 Mar 1 2011 emagent/
drwxrwxr-x 10 grid oinstall 4096 May 16 2011 oracle/
drwxrwx--- 7 grid oinstall 4096 Jan 27 2011 oraInventory/
$ cd 11.2.0.2
drwxrwxr-x 4 root oinstall 4096 Jan 26 2011 ./
drwxr-xr-x 6 root oinstall 4096 Jan 26 2011 ../
drwxr-xr-x 80 oracle oinstall 4096 Mar 17 2011 db_1/
drwxr-xr-x 70 root oinstall 4096 Jan 27 2011 grid/
$ cd ..
$ cd oracle
drwxrwxr-x 10 grid oinstall 4096 May 16 2011 ./
drwxr-xr-x 6 root oinstall 4096 Jan 26 2011 ../
drwxr-xr-x 4 oracle oinstall 4096 Feb 2 2011 admin/
drwxr-xr-x 4 oracle oinstall 4096 Feb 2 2011 cfgtoollogs/
drwxr-xr-x 2 grid oinstall 4096 Jan 26 2011 Clusterware/
drwxrwxr-x 11 grid oinstall 4096 Jan 26 2011 diag/
drwxr-xr-x 3 grid oinstall 4096 Jan 26 2011 hqract03/
drwxr-xr-x 3 grid oinstall 4096 Mar 23 2011 oradiag_grid/
drwxr----- 3 oracle oinstall 4096 May 16 2011 oradiag_oracle/
drwxr-xr-x 3 root root 4096 Jan 27 2011 oradiag_root/
SINGLE INSTANCE DATABASE (ORACLE RESTART)
$ cd app
drwxrwxr-x 6 503 oinstall 4096 Feb 26 2011 .
drwxr-xr-x 3 root root 4096 Apr 16 2009 ..
drwxrwxr-x 4 grid oinstall 4096 Feb 26 2011 11.2.0.2
drwxrwxr-x 8 grid oinstall 4096 Feb 26 2011 oracle
drwxrwx--- 6 grid oinstall 4096 Feb 26 2011 oraInventory
$ cd 11.2.0.2
drwxrwxr-x 4 grid oinstall 4096 Feb 26 2011 .
drwxrwxr-x 6 503 oinstall 4096 Feb 26 2011 ..
drwxr-xr-x 76 oracle oinstall 4096 Apr 6 2011 db_1
drwxr-x--- 69 root oinstall 4096 Feb 26 2011 grid
$ cd ..
$ cd oracle
drwxrwxr-x 8 grid oinstall 4096 Feb 26 2011 .
drwxrwxr-x 6 503 oinstall 4096 Feb 26 2011 ..
drwxrwxr-x 5 grid oinstall 4096 Feb 26 2011 admin
drwxrwxr-x 7 grid oinstall 4096 Feb 26 2011 cfgtoollogs
drwxrwxr-x 2 grid oinstall 4096 Feb 26 2011 checkpoints
drwxrwxr-x 2 grid oinstall 4096 Feb 26 2011 Clusterware
drwxrwxr-x 11 grid oinstall 4096 Feb 26 2011 diag
drwxrwxr-x 3 grid oinstall 4096 Feb 26 2011 hqods01
Thanks so much.

Hello
I did only check prod, as that is the important one.
i am afraid that setup is not clean. I won't use the work is wrong, but need to be normalized.
grid oracle base need to be separate from oracle oracle base, and the grid oracle home, MUST be outside of oracle base/oracle home of the oracle user.
In a multi user setup, the structure should be as follow.
grid user, group oinstall, asm* groups
oracle user, group oinstall, dba and db* groups
The GRID install, have, grid home and oracle base
the oracle base for grid should be, /u01/app/grid
the grid home should be, /u01/app/11.2.0.3/grid
the Oracle user have several homes, and oracle base
the oracle base for oracle should be, /u01/oracle
so, for permissions, when I create this, i do as root
mkdir -p /u01/app/11.2.0.3/grid
mkdir -p /u01/app/grid
mkdir -p /u01/app/oracle
mkdir -p /u01/app/oraInventory
chown -R grid:oinstall /u01
chown -R oracle:oinstall /u01/app/oracle
then, you install grid .. you have so say oracle home is /u01/app/grid and oracle home is /u01/app/11.2.0.3/grid
at the end, the root.sh as part of the install will take care of the permissions for oraInventory, and the rest for grid.
when grid is installed, you can move to the oracle db install you use oracle base as /u01/app/oracle and oracle home as /u01/app/oracle/product/11.2.0.3/dbhome_1
that will give you
2 4 drwxr-xr-x 6 root oinstall 4096 Sep 21 03:20 /u01
5996545 4 drwxr-xr-x 6 root oinstall 4096 Sep 18 22:58 /u01/app
5996546 4 drwxr-xr-x 8 grid oinstall 4096 Sep 18 22:50 /u01/app/grid
5996547 4 drwxr-xr-x 3 root oinstall 4096 Sep 18 22:30 /u01/app/11.2.0.3
5996548 4 drwxr-xr-x 69 root oinstall 4096 Sep 21 10:52 /u01/app/11.2.0.3/grid
5996549 4 drwxrwx--- 5 grid oinstall 4096 Oct 30 22:08 /u01/app/oraInventory
7406840 4 drwxr-xr-x 7 oracle oinstall 4096 Oct 30 22:09 /u01/app/oracle
7406841 4 drwxr-xr-x 3 oracle oinstall 4096 Sep 18 22:58 /u01/app/oracle/product
7406842 4 drwxr-xr-x 6 oracle oinstall 4096 Oct 30 22:04 /u01/app/oracle/product/11.2.0.3
7766052 4 drwxr-xr-x 77 oracle oinstall 4096 Nov 2 01:20 /u01/app/oracle/product/11.2.0.3/dbhome_1
Each user have to use his own oracle_base, as each oracle_base will store files and folders created for logs, admin, diagnostic with different permissions and different usages, for a reason you have role separation.
example of the content of each oracle base
$ find /u01/app/oracle/ -maxdepth 1 -ls
7406840 4 drwxr-xr-x 7 oracle oinstall 4096 Oct 30 22:09 /u01/app/oracle/
7406841 4 drwxr-xr-x 3 oracle oinstall 4096 Sep 18 22:58 /u01/app/oracle/product
8749076 4 drwxrwxr-x 3 oracle asmadmin 4096 Sep 18 23:03 /u01/app/oracle/diag
8749064 4 drwxr-x--- 6 oracle oinstall 4096 Oct 30 22:09 /u01/app/oracle/admin
8716289 4 drwxr-xr-x 2 oracle oinstall 4096 Oct 30 22:18 /u01/app/oracle/checkpoints
8749061 4 drwxr-x--- 5 oracle oinstall 4096 Sep 18 23:12 /u01/app/oracle/cfgtoollogs
$ find /u01/app/grid/ -maxdepth 1 -ls
5996546 4 drwxr-xr-x 8 grid oinstall 4096 Sep 18 22:50 /u01/app/grid/
7307540 4 drwxrwxr-x 4 grid oinstall 4096 Sep 18 22:49 /u01/app/grid/diag
7307474 4 drwxr-xr-x 2 grid oinstall 4096 Sep 18 22:33 /u01/app/grid/Clusterware
7307265 4 drwxr-xr-x 2 grid oinstall 4096 Sep 18 22:33 /u01/app/grid/checkpoints
7307532 4 drwxr-x--- 4 grid oinstall 4096 Sep 18 22:49 /u01/app/grid/cfgtoollogs
7406796 4 drwxr-xr-x 3 root root 4096 Sep 18 22:50 /u01/app/grid/oradiag_root
Take care,
Alvaro.

Need a function name for Sql and Oracle

Retrieving value of next line by doing opteration in previous row.

Can you rephrase the question? Or better yet, provide an example? I'm not sure I understand what you are asking.
My best guess is that you are looking for the analytic functions LEAD or LAG in Oracle, assuming you are on a relatively recent Oracle version. If by "SQL and Oracle" in your subject you mean "SQL Server and Oracle" (SQL is a language that all relational databases implement, SQL Server is Microsoft's relational database), I have no idea how (or if) you can do something similar with a built-in function in SQL Server. You would want to post in a SQL Server group to see how they handle that sort of thing.
Justin

Integration of BIP and Oracle Forms

Hi Gurus
I have been referring to a whitepaper 'How to integrate Oracle BI Publisher via Web Services in Oracle Forms' version 2.2
It mentions about using version Oracle Forms 10.1.2.3 and Oracle JDeveloper 10.1.3.4
I am using Oracle Forms 10.1.2.0.2 and JDeveloper 10.1.2.1.0
Do these versions support integration of BIP 10.1.3.4 with Oracle Forms 10.1.2.0.2 via Web Services?
If yes, is there any document which details the steps?
Thanks and kind regards,
Aparna

Hi,
you do not have to go on ETL route, unless there are other initiative towards warehouse. you can check fusion intelligence implementation document to see how to configure instanceconfig.xml file and other implementation details to take advantage of BI with EBS.
-jm

Add oraForms librairy to Oracle jdev 10.1.3.3 and build forum

Hi,
I have to build a forum using oracle jdev 10.1.3.3 and oracle database using soa architecture, that's why i wouldlike to add oraForms librairy to my oracle jdev, i would like lso to get some tutorials andsample in order to build my forum.
Thanks.
Edited by: user4585473 on 14 sept. 2008 14:14

Hi,
libraries can be added on the project level. Open the project properties (context menu) and choose the library node. I am afraid, but I don' think there is a tutorial that explains end-to-end what is your development assignment
Frank

Oracle ERP 11.5.10.2 and Oracle ERP R12 (12.1.1) on same linux4 machine.

Similar Messages

Maybe you are looking for