ORACLE error 1012 in FDPCLS when running payroll processes

Hi, All -
**Oracle Database 10.2.0.5.0 on RHEL5 (Single Node)**
**Oracle ERP Apps 11.5.10.2 on RHEL5 (Single Node)**
I have recently cloned my existing DEV environment from PROD. The database is now running on a NEW server where as the APPS server is still the same.
I found *Metalink node [ID 277148.1]* on this issue and it suggests to review the tnsnames settings. I have already verified that the tnsnames.ora file contains the right information and reflects the correct db server name.
Please let me know where else to check for an old database server entry that I should correct ... Thanks!
**ORACLE error 1012 in FDPCLS**
**Cause: FDPCLS failed due to ORA-01012: not logged on**
*The SQL statement being executed at the time of the error was: and was executed from the file.*
*/erp1/appsvr/erpappl/pay/11.5.0/bin/PYUGEN*
*Program exited with status -l*

Please bounce the database and the database listener and try then.
Can you find any errors in the database log file?
*/erp1/appsvr/erpappl/pay/11.5.0/bin/PYUGEN*Relink this executable file via adadmin or manually and try again.
Thanks,
Hussein

Similar Messages

Oracle error 1012 ("Not Logged On") & AUTOTRAN=Y

Hi.
I have a problem trying to access an Oracle 8.0.6
database from a 6.5 Tuxedo server.
Both TMS and server execute tpopen correctly
All services are declared as AUTOTRAN
Everything seems to be OK according to the logsgenerated by Oracle XA libraries
However, I always get the Oracle error 1012 ("Not Logged On")
when executing SQL statements from my pro*C server.
I just can't figure out why this error occurs.
I also tried to explicitly open a transaction from the client,
but the result is exactly the same (tpbegin is successfull,
however).
Could someone help me to make this work ?
Thanks.

Solved by removing "DB=<db>" from my OPENINFO string, as far as this parameter
should only be used when using proc*C "EXEC SQL ... AT <db>" statements.
"Mathieu Chauvin" <[email protected]> wrote:
>
Hi.
I have a problem trying to access an Oracle 8.0.6
database from a 6.5 Tuxedo server.
Both TMS and server execute tpopen correctly
All services are declared as AUTOTRAN
Everything seems to be OK according to the logsgenerated by Oracle XA libraries
However, I always get the Oracle error 1012 ("Not Logged On")
when executing SQL statements from my pro*C server.
I just can't figure out why this error occurs.
I also tried to explicitly open a transaction from the client,
but the result is exactly the same (tpbegin is successfull,
however).
Could someone help me to make this work ?
Thanks.

RW-50004: Error code received when running external process.

Hi,
I am trying to install 11.5.10 on windows vista and receiveing following error.
RW-50004: Error code received when running external process. Check log for details. Running Database Install Driver for VIS Instance
When checked on the log file following is the error. Could anyone pls help me with this regard
There was an error while running the command - c:\OracleApps\visdb\9.2.0\temp\VIS_erp\adrun9i.cmd APPS APPS
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process.
"dbInstancecfg" file shows below error
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCVIS))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=erp.erp)(Port=1521))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 13-JUL-2008 05:48:04
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Starting tnslsnr: please wait...
TNS-12546: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00516: Permission denied
32-bit Windows Error: 5: Input/output error
addlnctl.cmd exiting with status 3
OpenSCManager failed
adsvdlsn.cmd exiting with status 1002
ERRORCODE = 1002 ERRORCODE_END
.end std out.
System error 1060 has occurred.
The specified service does not exist as an installed service.
.end err out.
File c:\OracleApps\visdb\9.2.0\appsutil\install\VIS_erp\afmkinit_inst.cmd not instantiated in the current pass, this file will not be executed
Executing script in InstantiateFile:
c:\OracleApps\visdb\9.2.0\appsutil\install\VIS_erp\afmkinit.cmd
script returned:
Sun 07/13/2008
05:48 AM
1 file(s) copied.
1 file(s) copied.
1 file(s) copied.
"afmkinit.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Skipping INSTE8_PRF
Skipping INSTE8_APPLY
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: c:\OracleApps\visdb\9.2.0\appsutil\install\VIS_erp
adsvdlsn.cmd INSTE8_SETUP 1002
AutoConfig is exiting with status 1

Thanks for the update and the link was informational.
Can I install following on windows vista? Pls confirm.
Oracle® Applications 11i Release 10.2 Media Pack for
Microsoft Windows (32-bit) No That's not possible, if you would like to use this machine for Applications then the OS needs to be changed or install vmware/Microsoft Virtual PC with a Certified Operating system to be able to use Applications.
Thanks
Ronald

IMP-00017-ORACLE error 1012

Hi,
in 8.1.7 I want importe a table then I have this error :
import done in WE8DEC character set and WE8DEC NCHAR character set^C
IMP-00017: following statement failed with ORACLE error 1012:
"CREATE TABLE "TRAILOCC" ("TO_REF" NUMBER(12, 0), "TO_ENTITY" CHAR(40), "TO_"
"DATE" DATE, "TO_TIME" DATE, "TO_OCC" LONG) PCTFREE 10 PCTUSED 40 INITRANS "
"1 MAXTRANS 255 NOLOGGING STORAGE(INITIAL 723025920 FREELISTS 1 FREELIST GRO"
"UPS 1) TABLESPACE "PROD_DATA""
Can I then create this table TRAILOCC with INITIAL 223025920 and then importe the table ?
What should I add in imp command to importe just data since table is already created ?
Many thanks

hi
cmd> imp ignore=y
hope this helps
Tajcheck the prod_data tablespace has enough space

Error -17300 is generated when running selected step

Error -17300 is generated when running selected step (with ot without process model).
Using TestStand 2.0.1f1
See BMP file for error dialog.
I was trying out the example in the Resource Library - TestStand | Process Models | Running Selected Steps via Execution Entry Point -Test UUTs or Single Pass
(link http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3E2B756A4E034080020E74861&p_node=DZ52222&p_source=external ). This example is a 1.0.1 example but the web page does say that it should work in 2.0.x
I followed the readme file to use from "Execute" menu:
I have attached the resulant SequentialModel.seq file.
The modifications to the SequentialModel.seq file appears to wo
rk, but when I tried to run 'Run Selected Steps Using' menu item. I got the error message -17300 displayed. (see ErrorScr.bmp attached). The only way to close the execution was to launch Task manager and 'End Task'.
I have attached a small demo sequencefile.
To try example:
Move the SequentialModel.seq to 'C:\TestStand\Components\User\Models\TestStandModels'.
Launch TestStand Sequence Editor and open 'Debug Example1.seq'.
This is how to generate error condition-
1. Run the sequence file from menu Item Execute | Single Pass. You should get a full run with test result, it fails but that doesn't matter.
2. Select Steps 1 and 3 in Main of MainSequence. Run Selected Steps using Single Pass. Again sequence executes correctly.
3. Now run the same selected steps using the new menu item Execute | Selected Test(s). Again the sequence executes again.
4. With Steps 1 and 3 still selected. Run Selected Steps using Single Pass (as in 2 above). This time the error -17300 will be gener
ated.
I also tried running the sequence first doing step 1 (as above), then step 3, then repeating step 1 and this was ok. So the problem appears to be in interactive only.
Any clues as to whats going on and how to resolve it.
Regards
Ray Farmer
Regards
Ray Farmer
Attachments:
SequentialModel.seq ‏174 KB
Debug_Example1.seq ‏19 KB
ErrorScr.bmp ‏915 KB

Hi,
TestStand 2.0.1f1
Attached is a SequentialModel.seq that will run selected steps in a new execution using the process model. (It started life based on the inital
demo example)
When either Test UUT's or Single Pass is selected a check is made to determine if there is an initial selection.
If there isn't then the normal Test UUT's or Single Pass sequence is run.
If there is then a new sequence file is created with a new MainSequence. The selected steps are cloned and inserted to the new MainSequence. Also
the Setup and Cleanup groups are also cloned. Likewise the FileGlobal Defaults are copied to the FileGlobals of the new Sequencefile and also the
Locals.
Any Sequences contained in the SequenceFile are cloned to the new sequencefile (except the MainSequence, SequenceFileLoad and SequenceFileUnLoad).
In addition, as the Steps are cloned any break point are also set in the new sequence file.
The new sequence file is executed in a new execution using the process model entry point with the break on first step controlled from the menu
option.
One thing I am assuming is that there is only one element in the RunState.InitialSelection.SelectedSequences array.
Question: Under what circumstances will there be more than one selected sequence?
I had one problem, I tried my SequentialModel.seq with the demo auto.seq. This contains the SequenceFileLoad and SequenceFileUnload.
When I run this demo with a few steps selected, it run ok but when I closed the results window the UnloadFile callback was executed.
I found an option that can be set with the Engine.ReleaseSequenceFileEx which should have stopped the UnloadFile callback from running. But it
made no difference.
I then came across SequenceFile.UnloadCallbackEnabled() and using this function it did disable the Unload callback and this worked.
Question: So, Why didn't setting the Option in the Engine.ReleaseSequenceFileEx work?
Limitation using this SequentialModel.seq,
1) Any precondition to a step's execution based on the result of an early steps are not check when cloning the selected steps. Therefore this has
to be done manually when making the selection.
2) All Sequences in the SequenceFile are cloned to the new sequencfile. (May not be a problem when SequenceFile contains only a few sequences.)
3) The selections are limited to the MainSequence. If steps are selected in a Subsequence then these would be copied to a new MainSequence and
this would be run. Providing this doesn't require any parameters passed from the original caller then this should still run. The problem will
arise if parameters are required.
4) This is not really a limitation - If a full run of the SequenceFile using Test UUT's or Single Pass is required then the user must ensure no
steps are selected.
What I whould like to happen is the ability to make a selection in SubSequence calls either one or two levels down from the MainSequence. The new
execution setup would contain those steps in the MainSequence that are required to call those selected steps in the lower levels.
Would welcome any comments on my SequentialModel.seq attached and answers to my questions.
Regards
Ray Farmer
Regards
Ray Farmer
Attachments:
SequentialModel.seq ‏233 KB

Error when running payroll Help!!!

Error as follows, Can anyone having idea on this
I am running payroll for single employee and i am getting this error, looks like Its related to patch
If patch how do i look for right patch to resolve this error.
thanks & Regards,
Ram.
===============================================================================
Oracle Human Resources Generic Process
Started at : 11-JAN-2011 09:18:31
Chunk Size : 2
Threads : 4
Logging Category :
User Messaging : N
Interlock : N
Trace : N
RR Buffer Size : 500
RRV Buffer Size : 500
Bal Buffer Size : 400
EE Buffer Size : 500
Logging Area :
Assignment ID for Start:
Assignment ID for End o:
PL/SQL Output
HR_6882_HRPROC_ASSERT
LOCATION py3vntsetup:1a
APP-PAY-06882: Assertion failure detected at location py3vntsetup:1a.
Cause: an internal error has occurred at location py3vntsetup:1a.
Action: please contact your Oracle customer representative.
Executing request completion options...
Finished executing request completion options.
Concurrent program returned no reason for failure.
Exceptions posted by this request:
Concurrent Request for "QuickPay Run" has completed with error.
Edited by: user8822881 on Mar 11, 2011 4:09 PM

What is the application release?
APP-PAY-06882: Assertion failure detected at location py3vntsetup:1a.Please search MOS for this error and go through the docs.
Thanks,
Hussein

ORACLE error 1847 in FDPSTP while running concurrent program

When I try to run concurrent program getting below error
ORACLE error 1847 in FDPSTP
Cause: FDPSTP failed due to ORA-01847: day of month must be between 1 and last day of month
ORA-06512: at line 1
Parameters
Org_id number
Date select sysdate from dual;
Executable
PROCEDURE call_iptp15c (
p_operating_unit_in IN ap_invoices_all.org_id%TYPE,
p_start_date_in IN DATE,
ERROR_BUF OUT VARCHAR2,
RETCODE OUT VARCHAR2
What would be the reason for this.

Hi,
Please mention the application release along with the database version and OS.
Is this a custom or seeded concurrent program?
Please make sure you use a valid date format -- Note: 19171.1 - OERR: ORA 1847 day of month must be between 1 and last day of month
Thanks,
Hussein

Error in the Informatica when running the DAC load( Prebuilt Analytics)

Hi All,
Please help me with the below issue with the informatica i am getting when running the DAC load:
Below are the details:
SELECT F0006.MCMCU,F0006.MCSTYL,F0006.MCCO,F0006.MCAN8,F0006.MCDL01,F0006.MCRP06,F0006.MCUPMJ,F0006.MCUPMT,F0006.MCUSER,F0101.ABAN8,F0101.ABLNGP, F0101.ABEFTB,F0101.ABUPMJ,F0101.ABUPMT,F0116.ALAN8,F0116.ALEFTB,F0116.ALADD1,F0116.ALADD2,F0116.ALADD3,F0116.ALADD4,
F0116.ALADDZ,F0116.ALCTY1,F0116.ALCOUN,F0116.ALADDS,F0116.ALCTR,F0116.ALUPMJ,F0116.ALUPMT,
CAST(F0006.MCRP08 AS CHAR(10)) AS FLEX_ATTRIB_1_CHAR ,
CAST(F0006.MCRP10 AS CHAR(10)) AS FLEX_ATTRIB_2_CHAR,
CAST(F0006.MCRP19 AS CHAR(10)) AS FLEX_ATTRIB_3_CHAR,
CAST(F0006.MCRP08 AS CHAR(10)) AS FLEX_ATTRIB_4_CHAR,
CAST(F0006.MCRP13 AS CHAR(10)) AS FLEX_ATTRIB_5_CHAR,
CAST(F0006.MCRP14 AS CHAR(10)) AS FLEX_ATTRIB_6_CHAR,
CAST(NULL AS CHAR(10)) AS FLEX_ATTRIB_7_CHAR,
CAST(F0006.MCRP01 AS CHAR(10)) AS FLEX_ATTRIB_8_CHAR,
CAST(F0006.MCRP15 AS CHAR(10)) AS FLEX_ATTRIB_9_CHAR,
CAST(F06.MCRP16 AS CHAR(10)) AS FLEX_ATTRIB_10_CHAR,---------------------------Table name should be F0006
CAST(F0006.MCRP12 AS CHAR(10)) AS FLEX_ATTRIB_11_CHAR,
CAST(F0006.MCRP27 AS CHAR(10)) AS FLEX_ATTRIB_12_CHAR,
CAST(F0006.MCRP21 AS CHAR(10)) AS FLEX_ATTRIB_13_CHAR,
CAST(F0006.MCRP03 AS CHAR(10)) AS FLEX_ATTRIB_14_CHAR,
CAST(F0006.MCRP13 AS CHAR(10)) AS FLEX_ATTRIB_15_CHAR,
CAST(F0006.MCRP23 AS CHAR(10)) AS FLEX_ATTRIB_16_CHAR,
CAST(F0006.MCRP21 AS CHAR(10)) AS FLEX_ATTRIB_17_CHAR,
CAST(F0006.MCRP24 AS CHAR(10)) AS FLEX_ATTRIB_18_CHAR,
CAST(F0006.MCRP19 AS CHAR(10)) AS FLEX_ATTRIB_19_CHAR,
CAST(NULL AS CHAR(10)) AS FLEX_ATTRIB_20_CHAR,
CAST(F0006.MCRP12 AS CHAR(10)) AS STATE_REGION,
CAST(F0006.MCRP04 AS CHAR(10)) AS COUNTRY_REGION,
'0' AS X_CUSTOM
FROM F0006
LEFT OUTER JOIN F0101 ON
F0101.ABAN8 = F0006.MCAN8
LEFT OUTER JOIN F0116 ON
F0116.ALAN8 = F0006.MCAN8 AND
F0116.ALEFTB=F0101.ABEFTB
As mentioned in the SQL the table name should be F0006 instead F06, I have checked the Source Qualifier transformation and below is the SQL issued
SELECT F0006.MCMCU,F0006.MCSTYL,F0006.MCCO,F0006.MCAN8,F0006.MCDL01,F0006.MCRP06,F0006.MCUPMJ,F0006.MCUPMT,F0006.MCUSER,F0101.ABAN8,F0101.ABLNGP, F0101.ABEFTB,F0101.ABUPMJ,F0101.ABUPMT,F0116.ALAN8,F0116.ALEFTB,F0116.ALADD1,F0116.ALADD2,F0116.ALADD3,F0116.ALADD4,
F0116.ALADDZ,F0116.ALCTY1,F0116.ALCOUN,F0116.ALADDS,F0116.ALCTR,F0116.ALUPMJ,F0116.ALUPMT,
CAST($$FLEX_ATTRIB_1_CHAR AS CHAR(10)) AS FLEX_ATTRIB_1_CHAR ,
CAST($$FLEX_ATTRIB_2_CHAR AS CHAR(10)) AS FLEX_ATTRIB_2_CHAR,
CAST($$FLEX_ATTRIB_3_CHAR AS CHAR(10)) AS FLEX_ATTRIB_3_CHAR,
CAST($$FLEX_ATTRIB_4_CHAR AS CHAR(10)) AS FLEX_ATTRIB_4_CHAR,
CAST($$FLEX_ATTRIB_5_CHAR AS CHAR(10)) AS FLEX_ATTRIB_5_CHAR,
CAST($$FLEX_ATTRIB_6_CHAR AS CHAR(10)) AS FLEX_ATTRIB_6_CHAR,
CAST($$FLEX_ATTRIB_7_CHAR AS CHAR(10)) AS FLEX_ATTRIB_7_CHAR,
CAST($$FLEX_ATTRIB_8_CHAR AS CHAR(10)) AS FLEX_ATTRIB_8_CHAR,
CAST($$FLEX_ATTRIB_9_CHAR AS CHAR(10)) AS FLEX_ATTRIB_9_CHAR,
CAST($$FLEX_ATTRIB_10_CHAR AS CHAR(10)) AS FLEX_ATTRIB_10_CHAR,
CAST($$FLEX_ATTRIB_11_CHAR AS CHAR(10)) AS FLEX_ATTRIB_11_CHAR,
CAST($$FLEX_ATTRIB_12_CHAR AS CHAR(10)) AS FLEX_ATTRIB_12_CHAR,
CAST($$FLEX_ATTRIB_13_CHAR AS CHAR(10)) AS FLEX_ATTRIB_13_CHAR,
CAST($$FLEX_ATTRIB_14_CHAR AS CHAR(10)) AS FLEX_ATTRIB_14_CHAR,
CAST($$FLEX_ATTRIB_15_CHAR AS CHAR(10)) AS FLEX_ATTRIB_15_CHAR,
CAST($$FLEX_ATTRIB_16_CHAR AS CHAR(10)) AS FLEX_ATTRIB_16_CHAR,
CAST($$FLEX_ATTRIB_17_CHAR AS CHAR(10)) AS FLEX_ATTRIB_17_CHAR,
CAST($$FLEX_ATTRIB_18_CHAR AS CHAR(10)) AS FLEX_ATTRIB_18_CHAR,
CAST($$FLEX_ATTRIB_19_CHAR AS CHAR(10)) AS FLEX_ATTRIB_19_CHAR,
CAST($$FLEX_ATTRIB_20_CHAR AS CHAR(10)) AS FLEX_ATTRIB_20_CHAR,
CAST($$STATE_REGION AS CHAR(10)) AS STATE_REGION,
CAST($$COUNTRY_REGION AS CHAR(10)) AS COUNTRY_REGION,
'0' AS X_CUSTOM
FROM F0006
LEFT OUTER JOIN F0101 ON
F0101.ABAN8 = F0006.MCAN8
LEFT OUTER JOIN F0116 ON
F0116.ALAN8 = F0006.MCAN8 AND
F0116.ALEFTB=F0101.ABEFTB
The error code and error message in the workflow monitor says:
Message Code: VAR_27028
Message: Use override value [F06.MCRP16] for mapping parameter:[mplt_BC_SDE_JDE_InternalOrganization_BusinessUnits.$$FLEX_ATTRIB_10_CHAR].
Some how it is overridng all the values so please let me know what i can do.
Thanks in Advance

Oracle Support

Process chains get an error when run analysis process

When my PRD system‘s process chains run analysisi process, I gets below error message:
Error occurred when starting the parser: Error when opening an RFC connection (FUNCTION: 'R
Message no. BRAINOLAPAPI011
Diagnosis
Failed to start the MDX parser.
System Response
Error when opening an RFC connection (FUNCTION: 'R
Procedure
Check the Sys Log in Transaction SM21 and test the TCP-IP connection MDX_PARSER in Transaction SM59.
It's OK when i test the TCP-IP connection MDX_PARSER in Transaction SM59.
The Sys Log in Transaction SM21(error part):
M Wed Mar 19 09:22:50 2014
M *** ERROR => ThPOpen: ExecPopen("/usr/sap/BWP/DVEBMGS00/exe/tp" bwprd sapgw00 18933904 IDX=35, r, ..) returned -14 [thxxexec.c
M {root-id=532810645F5D12A0E1008000C0A8642F}_{conn-id=5328109B5F5D12A0E1008000C0A8642F}_5
A RFC 1878 CONVID 18933904
A   * CMRC=0 DATA=0 STATUS=0 SAPRC=0 RfcExecProgramKernel RfcRaiseErrorMessage cmd could not be started by OS (rc = 1)
A RFC> ABAP Programm: SAPLSTPA (Transaction: )
A RFC> User: JY-LKZ (Client: 900)
A RFC> Destination: CALLTP_AIX (handle: 8, DtConId: 530F4E5C30AF4550E1008000C0A8642E, DtConCnt: 0, ConvId: ,)
A RFC SERVER> RFC Server Session (handle: 1, 68443927, {5328109B-5F5D-12A0-E100-8000C0A8642F})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: STMS (Caller Program: SAPLTMSC)
A RFC SERVER> Called function module: TMS_CI_START_SERVICE
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1887
FUNCTION: 'RfcExecProgramKernel'
RfcRaiseErrorMessage cmd could not be started by OS (rc = 1)
PROG ="/usr/sap/BWP/DVEBMGS00/exe/tp" bwprd sapgw00 18933904 IDX=35
[abrfcio.c    9213]
A {root-id=532810645F5D12A0E1008000C0A8642F}_{conn-id=5328109B5F5D12A0E1008000C0A8642F}_5
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
M
M Wed Mar 19 09:23:15 2014
M *** ERROR => ThPOpen: ExecPopen("/usr/sap/BWP/DVEBMGS00/exe/tp" bwprd sapgw00 18968493 IDX=61, r, ..) returned -14 [thxxexec.c
M {root-id=532810645F5D12A0E1008000C0A8642F}_{conn-id=532811958F750F10E1008000C0A8642F}_1
A RFC 1878 CONVID 18968493
A   * CMRC=0 DATA=0 STATUS=0 SAPRC=0 RfcExecProgramKernel RfcRaiseErrorMessage cmd could not be started by OS (rc = 1)
A RFC> ABAP Programm: SAPLSTPA (Transaction: )
A RFC> User: TMSADM (Client: 000)
A RFC> Destination: CALLTP_AIX (handle: 3, DtConId: 530F4E7830AF4550E1008000C0A8642E, DtConCnt: 0, ConvId: ,)
A RFC SERVER> RFC Server Session (handle: 1, 70212851, {53281195-8F75-0F10-E100-8000C0A8642F})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: STMS (Caller Program: SAPLTMSC)
A RFC SERVER> Called function module: TMS_CI_START_SERVICE
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1887
FUNCTION: 'RfcExecProgramKernel'
RfcRaiseErrorMessage cmd could not be started by OS (rc = 1)
PROG ="/usr/sap/BWP/DVEBMGS00/exe/tp" bwprd sapgw00 18968493 IDX=61
[abrfcio.c    9213]
A {root-id=532810645F5D12A0E1008000C0A8642F}_{conn-id=532811958F750F10E1008000C0A8642F}_1
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE.
ps.
1、IT's everything ok in the development system.
2、It’s ok when i repeat this analysis process .
3、It’s ok when i run this analysis process in analysis process designer.
4、Attachment is the sys log in sm21.
Thanks everyone.

Hi Vignesh.B,
Yes,it's not user's problem . But i don't think it APD's problem .Cause all APD has the same problem and .
Below is one of APD souce and target :
Hope this information is useful .
Regards,
Lian

My DAQ program uses Traditional NI-DAQ in Visual C++ 6.0. I get error-10609 at SCAN_Start when run

My data acquisition program uses Traditional NI-DAQ in Visual C++ 6.0. When I run the program, I get error -10609 at the SCAN_Start that states
A transfer is already in progress for the specified resource, or the operation is not allowed because the device is in the process of performing transfers, possibly with different resources.
Why do I receive this error?

Hi,
TThe error -10609 can result from several situations in which the device's resources are already in use.
A Measurement & Automation (MAX) test panel is already open.
If you open a test panel window for your device and attempt to run your application, you can get this error. If this is the case, close the MAX test panel.
An AI Clear function was not used at the end of the previous acquisition.
If you do not call the AI Clear function after performing your acquisition, the resources remain open. Be sure to call this function, inputting your taskID, at the end of the acquisition.
Multiple programs are accessing the device.
If you have multiple VIs accessing the device, or perhaps a LabVIEW VI and another application, the resource will be taken and you will receive the error. You can only run one application accessing the specific resource (for example, analog input on channel 0) at a time
I hope this helps...and have a Great Day!
George

SET CURRENT DEGREE = 1..error when run the process chain..

Hi Experts,
when i run the process chain , i got the following error..
SET CURRENT DEGREE = 1..
what is this error?
Kindly help ..

hi,
As BW reporting queries are often CPU-intensive and geneally executed in parallel.
Parallel processing is activated dynamically in the SAP BW system for every reporting query CURRENT DEGREE = ANY and itsdefault value is 1.
you can limit the maximum number of parallel tasks using ZPARM PARAMDEG(maximum number of parallel tasks ) for the no. of parallel processors for its usuage and this should match no. of processors you can get touch with your basis team
check SAP Note:390016 -DB2/390: BW: Database settings and performance ; in that look at query parallelism it explain about this
hope it helps
regards
laksh

How to capture error messages for BCP when running through XP_CMDSHELL

XP_cmdshell returns 0 as success when running BCP that causes insertion failure for any records (failure because of truncation, data type mismatch etc.)
One way is to capture output message in temp table and can parse the messages. but I am looking for some direct methods.

Hi Naveen Raikwar,
We can use insert/execute syntax to insert error output to a file, here is a good article, please see:
http://www.sqlservercentral.com/articles/Error+Handling/69196/
And here is a similar thread, please refer to:
http://social.msdn.microsoft.com/Forums/en-US/sqltools/thread/b37ec1fd-ea2f-4546-93c1-8bb9d589710d
Thanks,
Eileen
Eileen Zhao
TechNet Community Support

APP-FND-01564: ORACLE error 6550 in pwdalt when resetting apps password

Could anyone help me with this issue:
when executing the following: FNDCPASS apps/<password> 0 Y system/<password> SYSTEM APPLSYS <New_password>
i obtain the following error and i cannot restart the apps:
Application Object Library: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
module:
Current system time is 31-MAR-2010 14:22:14
Working...
APP-FND-01564: ORACLE error 6550 in pwdalt
Cause: pwdalt failed due to ORA-06550: line 1, column 29:
PLS-00302: component 'GET_PWD_ENC_MODE' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored.
The SQL statement being executed at the time of the error was: begin :r := nvl(fnd_web_sec.get_pwd_enc_mode, 'N'); end; and was executed from the file &ERRFILE.
Concurrent request completed
Current system time is 31-MAR-2010 14:22:14

same issue:
APP-FND-01564: ORACLE error 6550 in pwdalt
Cause: pwdalt failed due to ORA-06550: line 1, column 29:
PLS-00302: component 'GET_PWD_ENC_MODE' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored.
The SQL statement being executed at the time of the error was: begin :r := nvl(fnd_web_sec.get_pwd_enc_mode, 'N'
); end; and was executed from the file &ERRFILE.

Error shown in console while running BPEL process

We have built one BPEL process that creates AR invoices in Oracle Apps from a legacy system. While deploying the process it deploys without Error, but when viewing the process through BPEL Console by clicking the instance it throws Below ERROR -- "java.rmi.RemoteException: No Exception - originate from:java.lang.Exception: No Exception - originate from:; nested exception is:
java.lang.Exception: No Exception - originate from:"
We have increased <transaction-config timeout="90000"/> residing in Oracle_Home\integration\orabpel\system\appserver\oc4j\j2ee\home\server.xml file. but still the Error remains same....
Any help will be appreciated.
Regards,
Suman

Have you created a connection pool with the JNDI specified while configuring adapter in Oracle Apps adapter on weblogic admin console. You should create it at Deployments --> OracleAppsAdapter --> Configuration--> Outbound Connection pools
Make sure to update the adapter after creating a connection pool so that changes can take effect.
Regards,
Anuj

Error 404 -- NOT FOUND when running a form in form 11g

Hi All,
I got this problem when I run the forms using internet explorer.
I work on Forms 11g which uses weblogic 10.3 for web deployment of the forms.
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
Can any one tell me where it went wrong.
Thanks

Let's start by clearing up some confusion.
PORTS
In version 11.1.1.x here are how the common ports are defined by default:
1. HTTP Server - 8888
2. WLS_FORMS - 9001
3. WLS_REPORTS - 9002
4. WLS Admin Server - 7001
So, if you understand how ports work in general, you should see that there are two ways to run a form. You can either go through HTTP Server or call WLS_FORMS directly. This means that both of the following would work, although one would be a direct path and the other would route the request through the HTTP Server:
<li>http://ie1fdtfc5zl1s:9001/forms/frmservlet?config=frmdemo
<li>http://ie1fdtfc5zl1s:8888/forms/frmservlet?config=frmdemo
Port 7001, will always be the Admin Server port by default for the Classic domain. By default, the only thing you can do from here is access EM or WLS Console.
As for the tns issue, by default, both the Builder and runtime will expect to find tnsnames.ora in the Instance Home \config so be sure you are adding the correct entries to the correct file.
You can hard code a path to the file which you prefer be used by setting TNS_ADMIN in default.env (e.g. TNS_ADMIN=C:\Oracle\mytnsdirectory). This will apply only to running forms and not the Builder.
Also, here is something which often is confusing to many people.... just because you launched your form from the Builder does not mean that the running form has anything to do with the Builder at that point. In other words, when you click on the RunForm button in the builder all you are doing is passing a url to a browser. The browser and the form are not using any of the Builder's settings except those which may have been passed in the URL (e.g. username/password). ALL running forms are considered "runtime". This means all of the environment configuration information for a running form will need to be set in default.env. The Builder, on the other hand will rely on the System variable, Windows Registry (or shell if on Unix).

ORACLE error 1012 in FDPCLS when running payroll processes

Similar Messages

Maybe you are looking for