Oracle Error code: 1116, message: ORA-01116: error in opening database file

Hi ,
Please advise on this error message
Oracle Error code: 1116, message: ORA-01116: error in opening database file 202 ORA-01110: data file 202: '/u02/app/oracle/oradata/ubidev12/dbf/temp02.dbf'
All these while, the dashboard working well in my local computer application with server database.
Just discovered this error when I refresh the data.
Kindly advise.
Thanks,
Kim Yoke

the more detail error is
Oracle Error code: 1116, message: ORA-01116: error in opening database file 203 ORA-01110: data file 203: '/u02/app/oracle/oradata/ubidev12/dbf/temp03.dbf' ORA-27041: unable to open file SVR4 Error: 2: No such file or directory Additional information

Similar Messages

  • Oracle List of Error codes and messages

    Hi,
    In our application we are planning to use sqlloader to load a huge amount of data into the database. However, to parse the log file we need a list of Oracle error codes and messages that are commonly encountered while loading data using sqlloader. Does anyone know where to get such a list?
    Thanks

    In our application we are planning to use sqlloader to load a huge amount of data into the database. However, to parse the log file we need a list of Oracle error codes and messages that are commonly encountered while loading data using sqlloader. Does anyone know where to get such a list?I don't know where to get such a list, but for a start you could search the log for the words "Error" and "ORA-"

  • Oracle Error Code and Message for Query Timeout

    Hi,
    I need to catch the oracle error code and message for query timeout.
    I am using Oracle 9i and could not find any relevant error code/message
    for query timeout in Oracle Error Messages.
    If anyone has encountered such error messages, please let me know the
    Oracle Code or Error message.
    Thanks & Regards,
    Kanjana

    Fly is correct in that Oracle will normally let a query run forever in the absense of a user profile or dbms_resource setting that limits a users (query) resouce usage.
    The errors returned for these condition would probably vary but errors ORA-02092 "exceeded session limit on CPU usage, you are being logged off" and ORA-02093 "exceeded call limit on CPU usage" might be of interest.
    But for distributed queries Oracle does impose a time limit. See Oracle error ORA-02049 "timeout: distributed transaction waiting for lock"
    HTH -- Mark D Powell --

  • Oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters

    Dear Guru's,
    I am not able to solve the above issue for last couple of days.
    I am newbie to the webservice
    My Issue...
    I am using Jdeveloper 11.1.2.4.0 Release 2
    1. Using Jdev I built one small Web Service with two methods.
            While testing the Webservice...
                   I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
    2. I created another application to consume the web service i created.
                   1. I added the webservice SOAP and added the method.
                   2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
    3. While executing the created jsf page I received the error message as below
    "oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
    Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
    Can anybody help to solve this issue.
    Thanks and Regards,
    Durai S E

    Dear Guru's,
    I am not able to solve the above issue for last couple of days.
    I am newbie to the webservice
    My Issue...
    I am using Jdeveloper 11.1.2.4.0 Release 2
    1. Using Jdev I built one small Web Service with two methods.
            While testing the Webservice...
                   I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
    2. I created another application to consume the web service i created.
                   1. I added the webservice SOAP and added the method.
                   2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
    3. While executing the created jsf page I received the error message as below
    "oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
    Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
    Can anybody help to solve this issue.
    Thanks and Regards,
    Durai S E

  • Where can find Oracle error code and message?

    Where can find Oracle error code and message?

    http://otn.oracle.com/pls/db92/db92.to_toc?pathname=server.920%2Fa96525%2Ftoc.htm&remark=docindex
    That would be the "Error Messages" manual.

  • ERROR at line 1: ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine ORA-20000: Oracle Text error: DRG-10700: preference does not exist: global_lexer ORA-06512: at "CTXSYS.DRUE", line 160 ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366

    database version 11.2.0.4
    rac two node
    CREATE INDEX MAXIMO.ACTCI_NDX3 ON MAXIMO.ACTCI
    (DESCRIPTION)
    INDEXTYPE IS CTXSYS.CONTEXT
    PARAMETERS('lexer global_lexer language column LANGCODE')
    ERROR at line 1:
    ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
    ORA-20000: Oracle Text error:
    DRG-10700: preference does not exist: global_lexer
    ORA-06512: at "CTXSYS.DRUE", line 160
    ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366

    Like the error message says, you don't have a global_lexer.  So, you need to create a global_lexer and that lexer must have at least a default sub_lexer, then you can use that global_lexer in your index parameters.  Please see the demonstration below, including reproduction of the error and solution.
    SCOTT@orcl12c> -- reproduction of problem:
    SCOTT@orcl12c> CREATE TABLE actci
      2    (description  VARCHAR2(60),
      3      langcode     VARCHAR2(30))
      4  /
    Table created.
    SCOTT@orcl12c> CREATE INDEX ACTCI_NDX3 ON ACTCI (DESCRIPTION)
      2  INDEXTYPE IS CTXSYS.CONTEXT
      3  PARAMETERS('lexer global_lexer language column LANGCODE')
      4  /
    CREATE INDEX ACTCI_NDX3 ON ACTCI (DESCRIPTION)
    ERROR at line 1:
    ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
    ORA-20000: Oracle Text error:
    DRG-10700: preference does not exist: global_lexer
    ORA-06512: at "CTXSYS.DRUE", line 160
    ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366
    SCOTT@orcl12c> -- solution:
    SCOTT@orcl12c> DROP INDEX actci_ndx3
      2  /
    Index dropped.
    SCOTT@orcl12c> BEGIN
      2    CTX_DDL.CREATE_PREFERENCE ('global_lexer', 'multi_lexer');
      3    CTX_DDL.CREATE_PREFERENCE ('english_lexer', 'basic_lexer');
      4    CTX_DDL.ADD_SUB_LEXER ('global_lexer', 'default', 'english_lexer');
      5  END;
      6  /
    PL/SQL procedure successfully completed.
    SCOTT@orcl12c> CREATE INDEX ACTCI_NDX3 ON ACTCI (DESCRIPTION)
      2  INDEXTYPE IS CTXSYS.CONTEXT
      3  PARAMETERS('lexer global_lexer language column LANGCODE')
      4  /
    Index created.

  • APEX 4.0.2 Project Gantt Chart - Error Code: 2002 Message: Empty input

    Hi
    I have created a brand new page containing a Project Gantt Chart region. The Gantt chart is designed to track the progress of a job over time. The page has one chart series containing the following SQL.
    SELECT null LINK,
    stage NAME,
    rownum ID,
    null PARENT_ID,
    trunc(start_date) ACTUAL_START,
    trunc(completion_date) ACTUAL_END,
    decode(completion_date, null, 0, 100) PROGRESS
    FROM tracking
    WHERE job_reference = '889343'
    This SQL statement returns values from SQL Developer and from the SQL Workshop > SQL Commands from within APEX itself.
    The problem is that when I run the page the following error displays inside the region
    Category: 2000
    Error code: 2002
    Message: Empty input
    Environment Information
    Application Express 4.0.2.00.07. - Clean installation not upgraded from APEX 3
    Using Firefox 3.6.15
    Issue identical in IE
    DB version - Oracle Database 11g Release 11.2.0.1.0 - 64bit Production
    I'm really stuck so I hope someone can help me out. I really would appreciate it.
    Thanks
    Kylie

    Debug mode doesn't appear to have picked anything up that looks out of the ordinary to me or raises any alarm bells.
    This is the XML with a reduced number of records returned.
    <anygantt>

    <settings>

    <title align="Center" position="Top">
    <text>Resources Gantt</text>

    <font_style>
    <font face="Tahoma" size="2" color="0x000000"/>
    </font_style>
    </title>
    <outer_margin left="0" top="0" right="0" bottom="0"/>

    <background>
    <fill type="Solid" color="0xffffff" opacity="0"/>
    <border enabled="false"/>
    <corners type="Square"/>
    </background>
    <navigation enabled="true"/>

    <locale>

    <date_time_format week_starts_from_monday="True">

    <months>

    <names>
    January,February,March,April,May,June,July,August,September,October,November,December
    </names>
    <short_names>Jan,Feb,Mar,Apr,May,Jun,Jul,Aug,Sep,Oct,Nov,Dec</short_names>
    </months>

    <week_days>

    <names>
    Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
    </names>
    <short_names>Sun,Mon,Tue,Wed,Thu,Fri,Sat</short_names>
    </week_days>

    <format>
    <full>%yyyy.%MM.%dd.%HH.%mm.%ss</full>
    <date>%yyyy.%MM.%dd</date>
    <time>%HH.%mm.%ss</time>
    </format>
    </date_time_format>
    </locale>
    </settings>

    <datagrid enabled="true">

    <columns>

    <column width="40" cell_align="Center">

    <header>
    <text>ID</text>
    </header>
    <format>{%ID}</format>
    </column>

    <column attribute_name="Name" width="180" cell_align="Center">

    <header>
    <text>Name</text>
    </header>
    <format>{%Name}</format>
    </column>

    <column attribute_name="ActualStart" width="80" cell_align="Center">

    <header>
    <text>Start Date</text>
    </header>
    <format>{%ActualStart}{dateTimeFormat:%dd-%MMM-%yyyy}</format>
    </column>

    <column attribute_name="ActualEnd" width="80" cell_align="Center">

    <header>
    <text>End Date</text>
    </header>
    <format>{%ActualEnd}{dateTimeFormat:%dd-%MMM-%yyyy}</format>
    </column>
    </columns>
    </datagrid>

    <timeline>
    <plot line_height="30" item_height="15" item_padding="5"/>
    </timeline>

    <styles>

    <period_styles>

    <period_style name="defaultStyle">

    <tooltip enabled="true">

    <text>
    Task: {%Name}
    Start Date: {%ActualStart}{dateTimeFormat:%dd-%MMM-%yyyy}
    End Date: {%ActualEnd}{dateTimeFormat:%dd-%MMM-%yyyy}
    Complete: {%Complete}%
    </text>
    <font color="Black"/>
    </tooltip>

    <bar_style>

    <middle shape="Full">
    <fill enabled="true" type="Solid" opacity="0.8" color="0x1D8BD1"/>
    <border enabled="true" type="Solid" color="Black"/>
    </middle>

    <states>

    <hover>

    <middle>
    <border enabled="true" type="Solid" color="Red"/>
    </middle>
    </hover>
    </states>

    <start>

    <marker type="Rhomb">
    <fill enabled="true" type="Solid" opacity="0.8" color="0x1D8BD1"/>
    <border enabled="true" type="Solid" color="Black"/>
    </marker>
    </start>

    <end>

    <marker type="Rhomb">
    <fill enabled="true" type="Solid" opacity="0.8" color="0x1D8BD1"/>
    <border enabled="true" type="Solid" color="Black"/>
    </marker>
    </end>
    </bar_style>
    </period_style>
    </period_styles>

    <task_styles>

    <task_style name="defaultStyle">

    <tooltip enabled="true">

    <text>
    Task: {%Name}
    Start Date: {%ActualStart}{dateTimeFormat:%dd-%MMM-%yyyy}
    End Date: {%ActualEnd}{dateTimeFormat:%dd-%MMM-%yyyy}
    Complete: {%Complete}%
    </text>
    <font color="Black"/>
    </tooltip>

    <row_datagrid>

    <tooltip enabled="true">

    <text>
    Task: {%Name}
    Start Date: {%ActualStart}{dateTimeFormat:%dd-%MMM-%yyyy}
    End Date: {%ActualEnd}{dateTimeFormat:%dd-%MMM-%yyyy}
    Complete: {%Complete}%
    </text>
    <font color="Black"/>
    </tooltip>
    </row_datagrid>

    <actual>

    <bar_style>

    <middle shape="Full">
    <fill enabled="true" type="Solid" opacity="0.8" color="0x1D8BD1"/>
    <border enabled="true" type="Solid" color="Black"/>
    </middle>

    <states>

    <hover>

    <middle>
    <border enabled="true" type="Solid" color="Red"/>
    </middle>
    </hover>
    </states>

    <start>

    <marker type="Rhomb">
    <fill enabled="true" type="Solid" opacity="0.8" color="0x1D8BD1"/>
    <border enabled="true" type="Solid" color="Black"/>
    </marker>
    </start>

    <end>

    <marker type="Rhomb">
    <fill enabled="true" type="Solid" opacity="0.8" color="0x1D8BD1"/>
    <border enabled="true" type="Solid" color="Black"/>
    </marker>
    </end>
    </bar_style>
    </actual>

    <progress>

    <bar_style>

    <middle shape="Full">
    <fill enabled="true" type="Solid" opacity="0.8" color="0xF1683C"/>
    <border enabled="true" type="Solid" color="Black"/>
    </middle>

    <start>

    <marker type="Rhomb">
    <fill enabled="true" type="Solid" opacity="0.8" color="0xF1683C"/>
    <border enabled="true" type="Solid" color="Black"/>
    </marker>
    </start>

    <end>

    <marker type="Rhomb">
    <fill enabled="true" type="Solid" opacity="0.8" color="0xF1683C"/>
    <border enabled="true" type="Solid" color="Black"/>
    </marker>
    </end>
    </bar_style>
    </progress>

    <baseline>

    <bar_style>

    <middle shape="Full">
    <fill enabled="true" type="Solid" opacity="0.8" color="0x2AD62A"/>
    <border enabled="true" type="Solid" color="Black"/>
    </middle>

    <start>

    <marker type="Rhomb">
    <fill enabled="true" type="Solid" opacity="0.8" color="0x2AD62A"/>
    <border enabled="true" type="Solid" color="Black"/>
    </marker>
    </start>

    <end>

    <marker type="Rhomb">
    <fill enabled="true" type="Solid" opacity="0.8" color="0x2AD62A"/>
    <border enabled="true" type="Solid" color="Black"/>
    </marker>
    </end>
    </bar_style>
    </baseline>
    </task_style>
    </task_styles>

    <resource_styles>

    <resource_style>

    <row_datagrid>

    <tooltip enabled="true">

    <text>
    Task: {%Name}
    Start Date: {%ActualStart}{dateTimeFormat:%dd-%MMM-%yyyy}
    End Date: {%ActualEnd}{dateTimeFormat:%dd-%MMM-%yyyy}
    Complete: {%Complete}%
    </text>
    <font color="Black"/>
    </tooltip>
    </row_datagrid>
    </resource_style>
    </resource_styles>

    <defaults>

    <task>

    <task_style>

    <row_datagrid>

    <tooltip enabled="true">

    <text>
    Task: {%Name}
    Start Date: {%ActualStart}{dateTimeFormat:%dd-%MMM-%yyyy}
    End Date: {%ActualEnd}{dateTimeFormat:%dd-%MMM-%yyyy}
    Complete: {%Complete}%
    </text>
    <font color="Black"/>
    </tooltip>
    </row_datagrid>
    </task_style>
    </task>
    </defaults>
    </styles>

    <project_chart>

    <tasks>
    <task id="1" parent="" name="STAGE1" actual_start="2010.08.11 12.08.00" actual_end="" progress="0" style="defaultStyle"/>
    <task id="2" parent="" name="STAGE2" actual_start="" actual_end="" progress="0" style="defaultStyle"/>
    <task id="3" parent="" name="STAGE3" actual_start="2010.07.27 12.07.00" actual_end="2010.08.06 12.08.00" progress="100" style="defaultStyle"/>
    <task id="4" parent="" name="STAGE4" actual_start="" actual_end="" progress="0" style="defaultStyle"/>
    <task id="5" parent="" name="STAGE5" actual_start="" actual_end="" progress="0" style="defaultStyle"/>
    </tasks>
    </project_chart>
    </anygantt>
    Thank you for your assistance.
    Regards
    Kylie

  • ORA-01116: error in opening database

    I am trying to run a query in UNIX via sqlplus and I am getting this error
    sqlplus username/password @querymane.sql
    ORA-00604: error occurred at recursive SQL level 1
    ORA-01116: error in opening database file 1
    ORA-01110: data file 1: '/u01/app/oracle/oradata/PNTR/system01.dbf'
    ORA-27092: size of file exceeds file size limit of the process
    Additional information: 262143
    Additional information: 537089
    I will appreciate any hint!

    Check "ulimit" and set it to "unlimited".

  • Error code = 601; message="An Error happened during call of MaxDB Tool sdbi

    I'm trying to install SAPNW7.0ABAPTrialSP12 and
    I did these steps and was able to reinstall without any problems.
    1. Run registry clean tool that came with the packaged software
    \Additional_Tools\RegCleanTool
    2. Then run Uninstall - System/Standalone Engine/Optional Standadlon ......
    This is under the Software Life-Cycle Options-Uninstall
    3. Check if there are any files located in
    \Program Files\sapinst_instdir -
    delete this directory
    \Documents and SettinsThe specified item was not found.\Local settings\Temp
    delete any references to SAP
    The above steps helped me to reinstall the Trial software.
    Make sure that the system for the install meet the following requirements:
    u2022 Operating System: Windows XP Professional (Service Pack 2) or Windows Server 2003 or Windows Vista
    u2022 Hostname must not exceed 13 characters
    u2022 NTFS-File system
    u2022 Internet Explorer 5.5 or higher or Firefox 1.0 or higher
    u2022 At least 1 GB RAM (2-4 GB recommended)
    u2022 Pagefile size according to your RAM settings.
    u2022 Intel Pentium III/1.1 GHz or higher (or compatible)
    u2022 30 GB hard disk space temporary during installation - 24 GB permanent
    The actual hard disk space required is more than 32GB. It is best to install the SAP directory on a separate drive if possible. Othewise you have to make sure that the drive where you install SAP has sufficient space for you system and the SAP install.
    u2022 High-resolution monitor (1024x768 or higher, 256 colors)
    u2022 Make sure that no other SAP system is installed on your computer
    u2022 The SAP system requires several ports for communication services. Therefore the file %WINDIR%\system32\drivers\etc\services must not include an entry for the ports 3200, 3600, 3900 and 8000. A possible entry can be excluded by using the hash symbol (#). (Note: The entry sapmsNSP 3600 for dialog instances may not exist, as it is set to 0 in Trial versions).
    u2022 If no DHCP server is available on your network (which dynamically determines the IP address) or your computer is not connected to any network, you need to install the virtual interface adapter MS Loopback Adapter.
    but it's happening the following error :
    (Dec 6, 2023 9:32:54 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed.  Look at the log file J:\sapdb\NSP\log.txt for details.
    (Dec 6, 2023 9:32:54 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile J:/DOCUME1/Nando/CONFIG1/Temp/MaxDBSAPNWPREV.log")
    STACK_TRACE: 22
    ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile J:/DOCUME1/Nando/CONFIG1/Temp/MaxDBSAPNWPREV.log")
         at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
         at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
         at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Thanks,
    Nando

    I'm trying to install SAPNW7.0ABAPTrialSP12 and
    I did these steps and was able to reinstall without any problems.
    1. Run registry clean tool that came with the packaged software
    \Additional_Tools\RegCleanTool
    2. Then run Uninstall - System/Standalone Engine/Optional Standadlon ......
    This is under the Software Life-Cycle Options-Uninstall
    3. Check if there are any files located in
    \Program Files\sapinst_instdir -
    delete this directory
    \Documents and SettinsThe specified item was not found.\Local settings\Temp
    delete any references to SAP
    The above steps helped me to reinstall the Trial software.
    Make sure that the system for the install meet the following requirements:
    u2022 Operating System: Windows XP Professional (Service Pack 2) or Windows Server 2003 or Windows Vista
    u2022 Hostname must not exceed 13 characters
    u2022 NTFS-File system
    u2022 Internet Explorer 5.5 or higher or Firefox 1.0 or higher
    u2022 At least 1 GB RAM (2-4 GB recommended)
    u2022 Pagefile size according to your RAM settings.
    u2022 Intel Pentium III/1.1 GHz or higher (or compatible)
    u2022 30 GB hard disk space temporary during installation - 24 GB permanent
    The actual hard disk space required is more than 32GB. It is best to install the SAP directory on a separate drive if possible. Othewise you have to make sure that the drive where you install SAP has sufficient space for you system and the SAP install.
    u2022 High-resolution monitor (1024x768 or higher, 256 colors)
    u2022 Make sure that no other SAP system is installed on your computer
    u2022 The SAP system requires several ports for communication services. Therefore the file %WINDIR%\system32\drivers\etc\services must not include an entry for the ports 3200, 3600, 3900 and 8000. A possible entry can be excluded by using the hash symbol (#). (Note: The entry sapmsNSP 3600 for dialog instances may not exist, as it is set to 0 in Trial versions).
    u2022 If no DHCP server is available on your network (which dynamically determines the IP address) or your computer is not connected to any network, you need to install the virtual interface adapter MS Loopback Adapter.
    but it's happening the following error :
    (Dec 6, 2023 9:32:54 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed.  Look at the log file J:\sapdb\NSP\log.txt for details.
    (Dec 6, 2023 9:32:54 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile J:/DOCUME1/Nando/CONFIG1/Temp/MaxDBSAPNWPREV.log")
    STACK_TRACE: 22
    ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile J:/DOCUME1/Nando/CONFIG1/Temp/MaxDBSAPNWPREV.log")
         at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
         at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
         at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Thanks,
    Nando

  • (error code = 200; message="Java error"; exception = [java.lang.Exception])

    Hi, I have several times tried to install ABAP Trial, but failed.
    So I need your help.
    As soon as I set up XP, I download and install the newest Java, then started installation of ABAP Trial.
    But at the end I just get an error message as belows.
    I hope you will guide me correct direction.
    Thanks for reading & Have a good day!
    (Jul 11, 2008 7:38:06 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, An error occurred and product installation failed.  Look at the log file C:\SAP\NSP\log.txt for details.
    (Jul 11, 2008 7:38:06 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
    STACK_TRACE: 15
    ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    (Jul 11, 2008 7:43:08 AM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed.  Look at the log file C:\SAP\NSP\log.txt for details.
    (Jul 11, 2008 7:43:08 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
    STACK_TRACE: 15
    ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)

    Hi YUN SEOK,
    I got the same error than you when I tried to install SAP NetWeaver ABAP Trial Version. 
    Could you help me in giving exactly the link you wrote.
    https://www.sdn.sap.com/irj
    Where is located exactly the answer ?
    I looked at this link but I did not find the answer.
    So could you give me exactly the location in this link ?
    Thanks in advance.
    STD,

  • ORA-20100: ORA-01116: error in opening database file

    Hi -
    I'm hitting this error for the first time. Anyone encountered this before? Any suggestions will be very appreciated. Thanks!
    141 EXCEPTION
    142
    143 when others then
    144 raise_application_error('-20100',SQLERRM);
    145 End;
    146 /
    20080207
    20080312
    Declare
    ERROR at line 1:
    ORA-20100: ORA-01116: error in opening database file
    ORA-06512: at line 144

    Thanks Satish for your reply.
    I let the DBA know and he was first suspecting a corrupted data file, but found no errors in the log. So, he was not sure why we got the error.
    We just re-ran and it went through fine the next time. strange though...

  • ProductException: (error code = 200; message="Java error"; exception = [jav

    hello
    Take me if you have the power to fa is that I have a good time trying to install the demo of sap, but I fail to do so últimamemente follows all the steps but in the end I get the following error java:
    productException: (error code = 200; message="Java error"; exception = java.lang.Exception)
    at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.execute(StepWrapperInstallFiles.java:2 54)
    at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.executeAllSteps(StepWrapperInstallFile s.java:224)
    at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.executeAllInstallationSteps(StepWrappe rInstallFiles.java:177)
    at java.lang.Thread.run(Unknown Source)
    may be that the Java Virtual Machine? what virtual machine
    it is recomd
    i don´t know how to correct them
    thank you very much
    bye

    Hello,
    This looks like a known issue error code: 200
    check this document:
    https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/6055f523-df6e-2910-f0bf-acccbb0a7d37
    Also, please make sure the service SAPNSP_00 @ OS level is running. If not, start the service manually and proceed with the installation.
    Hope it helps,
    Regards,
    Satish.
    Edited by: Satish Arram on Oct 10, 2008 6:30 PM

  • I'm getting an error code -69 message

    My iTunes library will not save and I get the error code -69 message pop up. This has started happening since the latest iTunes update was installed.

    Hi malc389,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    iTunes displays a -69 error when syncing iPod
    http://support.apple.com/kb/HT1210
    Cheers,
    - Judy

  • {"error": {"code": "Unauthorized", "message": "Missing access token"}}

    Hello everyone,
    Is quite frustrating that my las 5 docs ended in the same way.
    I got stuck in this error "{"error": {"code": "Unauthorized", "message": "Missing access token"}}"
    Could you please explain me the situation and if there is any solution to this issue.
    I tried to convert the pdf's in .doc or .docx, but without any luck. I tried it on Firefox, IE and Chrome. I do have the latest updates of Flash Player and I am on W7 64. I think this time is not Microsoft's fault.
    When I download the converted document from the server it has only 1kb.
    I assume this is a server error.
    Please let me know about any possibility in solving this situation!
    Thank you all for your reply!
    Petru

    Hello Mireia Romo ,
    First thing I will like to inform you is no SSO is required for KM with Portal.
    Have you done your SSO with Windows Active Directory?
    Regards,
    Chinmay

  • When trying to download creative cloud I receive the Error code 201 message

    When trying to download creative cloud I receive the Error code 201 message.  Can anyone tell me what to do?  I've already turned off my firewall and my pop ups

    Errors 201 & 205 & 206 & 207 or several U43 errors
    -http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html

Maybe you are looking for