Oracle Error :: ORA-12637 Packet receive failed

Hi buddies,
One of my staff's PC is receiving this error sometimes when she is trying to connect to the database and she is able to connect sometimes.
Oracle Error :: ORA-12637 Packet receive failed What could be the cause.
I tried replacing her tnsadmin with my tnsadmin and it didn't make a change, still able to connnect sometimes and sometimes not.
Able to connect using PL/SQL developer, but not using our customized application. (Everyone else are able to connect)
Is it network problem?
Please advice.
Thank You very much.
Alagu
Edited by: user645399 on Sep 16, 2009 8:37 PM

And from this cut-and-paste the OP is supposed to take what actions to solve the problem? Please don't just post that which is one google away every time someone posts an ORA- exception. You make some valuable contributions here but just posting expanded text doesn't give someone a list of actions to take that will help them resolve the issue. Better the question is left unanswered so others will be more likely to offer help.
To the OP:
It is highly likely you have a network issue and the fact that it is isolated to a single machine makes it reasonably easy to fix. First try to figure out which component is failing. Go to the router or switch and swap wires between that client machine and another one that is working properly. Does the problem move? If not then swap the wires. Again does the problem move? Next the NIC card? What if you put another machine on the desk and put the original hard disk in it?
Sometimes it just isn't worth the effort so you just swap out the machine.
Intermittent problems are always hard to identify and fix. What is on your side is that this is only affecting a single user.

Similar Messages

  • Brconnect Error ORA-12637: Packet receive failed

    Hello,
    We have a problem with Brconnect (42).
    When I start the brconnect program in DB13 transaction I get a following error message.
    The error come when I start the brconnect program under user sapservice(SID).
    When I start the brconnect program under (SID)ADM user the brconnect start error free.
    After server restart the brconnect program run good approximetly 1 hours under sapservice(SID) user too.
    We have used SAP ECC 6.0 with Oracle 10g with Windows 2003 x64 R2 SP2 environment.
    BR0301E SQL error -12637 at location BrInitOraCreate-2, SQL statement:
    'CONNECT system/************* AT PROF_CONN IN SYSOPER MODE'
    ORA-12637: Packet receive failed
    BR0303E Determination of Oracle version failed
    Have you get any idea what was the problem ?
    Thank you a lot.
    Imre Bolyki

    Hi,
    To execute the BRTools you need to have enough permissions and the environment variables set for that particular user. by default the SAPINST sets those variables and grants the required permission to the <SID>ADM user for executing the BRTools. Other users may not have enough permission to execute this and in turn these users will not have enough access to work on the database.
    Regards,
    Varadharajan M

  • Ora 12637 Packet received failed

    Hi,
    I have created oracle an oracle database. but when i try to connect to database either through sql/plus worksheet or enterprise manager i get the error: ora-12637 packet received failed. Another database is running properly. I could not fix the problem. I have searched threads for this error and found that I should comment
    SQLNET.AUTHENTICATION_SERVICES= (NTS)
    this line in sqlnet.ora
    Although i have not tried this as my customer is running a live database. And i don't want to make experiments.
    If some one knows what is the technical reason and what is the proper way to solve this. I'll be very thankfull
    But please don't recommend me 3-step story provided by oracle in documentation.
    Thnx

    C:\Documents and Settings\singhjb>TNSPING ONDSP101.DIGITALINDIASW.NET
    TNS Ping Utility for 32-bit Windows: Version 9.2.0.1.0 - Production on 09-MAY-20
    06 16:50:06
    Copyright (c) 1997 Oracle Corporation. All rights reserved.
    Used parameter files:
    C:\oracle\ora92\network\admin\sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = namesrv1
    .na.pg.com)(PORT = 1522)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = O
    NDSP101)))
    OK (630 msec)

  • BI Analytics - ORA-12637: Packet receive failed at OCI call OCIServerAttach

    Hi All,
    I'm running through 1 of the tutorials at the moment, and when I try to view results in an Analytics dashboard, I get the following error message: -
    View Display Error
    Odbc driver returned an error (SQLExecDirectW).
    Error Details
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 17001] Oracle Error code: 12637, message: ORA-12637: Packet receive failed at OCI call OCIServerAttach. [nQSError: 17014] Could not connect to Oracle database. (HY000)
    SQL Issued: SELECT s_0, s_1, s_2, s_3 FROM ( SELECT 0 s_0, "Sample Sales"."Products"."Type" s_1, "Sample Sales"."Time"."Per Name Year" s_2, "Sample Sales"."Base Facts"."Revenue" s_3 FROM "Sample Sales" ) djm
    The database is running and I can connect to it through SQLPLUS, I can tnsping the DB, can anyone help me debug this?
    Thanks,
    Mike

    1. If you are using SampleSales I assume these are xml files. If so, check your initb to verify the correct path for the folders.
    2. If you are using database, check if you have place the tns in the Oracle_BI1/Network location

  • ORA-12637: Packet receive failed

    Hi All
    I really need your help.
    I've installed Oracle Database 10g Release 2. Database works properly.
    Developer 6i, Developer 10g, SQL Developer, etc. are working with this database without problems.
    But Forms 5 can't work. It connect to Database 10g about 3 minutes. After that I can build datablocks.
    When I run the form, I see the following message:
    ORA-12637: Packet receive failed
    What should I do for resolve this problem?
    Thanks.

    Are you sure Developer 5 can't work with Database 10g?Which Oracle version is Developer 5 ? You can see it by entering Sql*Plus from Developer 5 Home.
    According to Metalink Note:207303.1 - Client / Server / Interoperability Support Between Different Oracle Versions not even 8.0.6, the Forms 6i version, is certified with 10g, but there are patches, as I said before.
    I'm not aware of patches for Forms 5 to run with 10g.

  • Error ORA - 12637 when start Oracle 8i Personnel

    I have install oracle 8i personnel to the window 98 notebook. The installation successful without any error. But when I used the oracle8i navigator and click on the local database, error "ORA-12637: Can not attach to Oracle 8i" and "ORA-12637 - Packet Receive Failed"
    The same error encountered when I start the database.
    Appreciate if any could help on this matter.
    Thanks in advance.

    Hi
    Check weather entries are there in the registry.
    Go to the services in the control panel and see if the oracle service has started if not start it. If this is up then the registry is OK. if If not u can create it using the oradim utility.
    Then set your oracle_sid = <dbname> in the dos prompt and try connecting again.
    Let us see what happense

  • Packet received fails when trying to connect to database

    Dear experts,
    i always received an error message: Packet Received Failed whenever i tried to connect to my 9i database. Once a while i will b able to connect without problem but sometimes is very annoying that i keep receiving this error and i have to retries a lot of time to connect depending on my luck.
    Does anyone have any idea what could be wrong here?
    Many thanks in advance for your advise.

    me, too.
    I installed Oracle 10g for windows on PC1
    and Developer/2000 Forms 5.0.6.8 + sql*net client 2.3.4.0.0 on PC2
    When I tried to connect to database by using SQL*Plus 3.3.4.0.0 the first time to connect is ok (but not fast as normal situation)
    after disconnect the SQL*Plus and tried to made another connection immediately, the [ORA-12637 packet receive failed] appears.
    after sometime, it may be success to connect again.
    I used to disable all Firewall and the problem still happen.
    Any one can help please?

  • Oracle 10G : ORA-12500: TNS:listener failed to start a dedicated server pro

    When connecting to Oracle I am getting this error. I have restarted the database, restarted the listener, but the problem does not go away. I have increased the processes to 400.
    Error :
    ORA-12500: TNS:listener failed to start a dedicated server process
    listener.log :
    27-APR-2004 11:15:38 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=BUILD.OCS.COM)(CID=(PROGRAM=C:\oracle\product\10.1.0\db_1\bin\sqlplus.exe)(HOST=MA-BUILDENV1)(USER=nkancharla))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.180.112)(PORT=2265)) * establish * BUILD.OCS.COM * 12500
    TNS-12500: TNS:listener failed to start a dedicated server process
    TNS-12560: TNS:protocol adapter error
    TNS-00530: Protocol adapter error
    Listener.trc :
    [27-APR-2004 11:14:38:382] snttcallback: op = 5, bytes = 170, err = 0
    [27-APR-2004 11:14:38:382] ntt2err: soc 324 error - operation=5, ntresnt[0]=524, ntresnt[1]=997, ntresnt[2]=0
    [27-APR-2004 11:14:38:382] nsdo: 160 bytes from NS buffer
    [27-APR-2004 11:14:38:382] nsglgrDoRegister: inst loads: ld1:12 mld1:100 ld2:12 mld2:445
    [27-APR-2004 11:14:38:382] nsdo: 68 bytes to NS buffer
    [27-APR-2004 11:15:38:951] nsopen: opening transport...
    [27-APR-2004 11:15:38:951] nttcnp: Validnode Table IN use; err 0x0
    [27-APR-2004 11:15:38:951] nttcnp: getting sockname
    [27-APR-2004 11:15:38:951] nttcnr: waiting to accept a connection.
    [27-APR-2004 11:15:38:951] nttcnr: getting sockname
    [27-APR-2004 11:15:38:951] nttcnr: connected on ipaddr 192.168.180.112
    [27-APR-2004 11:15:38:951] nttvlser: valid node check on incoming node 192.168.180.112
    [27-APR-2004 11:15:38:951] nttvlser: Accepted Entry: 192.168.180.112
    [27-APR-2004 11:15:38:951] nttcon: set TCP_NODELAY on 288
    [27-APR-2004 11:15:38:951] nsopen: transport is open
    [27-APR-2004 11:15:38:951] nsnainit: inf->nsinfflg[0]: 0xd inf->nsinfflg[1]: 0xd
    [27-APR-2004 11:15:38:951] nsopen: global context check-in (to slot 7) complete
    [27-APR-2004 11:15:38:951] nsanswer: deferring connect attempt; at stage 5
    [27-APR-2004 11:15:38:951] nscon: doing connect handshake...
    [27-APR-2004 11:15:38:951] nscon: got NSPTCN packet
    [27-APR-2004 11:15:38:951] nsevdrcvreq: recving connect data
    [27-APR-2004 11:15:38:951] nsdo: 248 bytes from NS buffer
    [27-APR-2004 11:15:38:951] nsevdansw: exit
    [27-APR-2004 11:15:38:951] nsglbgetRSPidx: returning ecode=0
    [27-APR-2004 11:15:38:951] nsc2addr: (ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oraclebuild)(ARGS='(LOCAL=NO)'))
    [27-APR-2004 11:15:38:951] nsbeqaddr: connecting...
    [27-APR-2004 11:15:38:951] snlpcss: Unable to spawn Oracle oracle (LOCAL=NO) build, error 258.
    [27-APR-2004 11:15:38:951] nserror: nsres: id=7, op=72, ns=12560, ns2=0; nt[0]=530, nt[1]=0, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
    [27-APR-2004 11:15:38:951] nscon: sending NSPTRF packet
    [27-APR-2004 11:15:38:951] nstimarmed: no timer allocated
    [27-APR-2004 11:15:38:951] nsclose: closing transport
    [27-APR-2004 11:15:38:951] nsclose: global context check-out (from slot 7) complete
    [27-APR-2004 11:15:38:951] nsgldissolve: Deallocating cxd 0xd89e18.

    Listener.ora:
    lsncrtl status:
    LSNRCTL for 32-bit Windows: Version 10.1.0.2.0 - Production on 27-APR-2004 11:27:56
    Copyright (c) 1991, 2004, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 32-bit Windows: Version 10.1.0.2.0 - Production
    Start Date 27-APR-2004 11:27:23
    Uptime 0 days 0 hr. 0 min. 33 sec
    Trace Level admin
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File C:\oracle\product\10.1.0\db_1\network\admin\listener.ora
    Listener Log File C:\oracle\product\10.1.0\db_1\network\log\listener.log
    Listener Trace File C:\oracle\product\10.1.0\db_1\network\trace\listener.trc
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ma-buildenv1.ocs.open-channels.com)(PORT=1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ma-buildenv1.ocs.open-channels.com)(PORT=8080))(Presentation=HTTP)(Session=RAW))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ma-buildenv1.ocs.open-channels.com)(PORT=2100))(Presentation=FTP)(Session=RAW))
    Services Summary...
    Service "BUILD" has 1 instance(s).
    Instance "BUILD", status UNKNOWN, has 1 handler(s) for this service...
    Service "BUILD.OCS.COM" has 1 instance(s).
    Instance "build", status READY, has 2 handler(s) for this service...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    sqlnet.log:
    Fatal NI connect error 12500, connecting to:
    (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ma-buildenv1.ocs.open-channels.com)(PORT=1521))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=BUILD.OCS.COM)(CID=(PROGRAM=C:\oracle\product\10.1.0\db_1\bin\sqlplus.exe)(HOST=MA-BUILDENV1)(USER=nkancharla))))
    VERSION INFORMATION:
         TNS for 32-bit Windows: Version 10.1.0.2.0 - Production
         Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 10.1.0.2.0 - Production
    Time: 27-APR-2004 11:28:42
    Tracing not turned on.
    Tns error struct:
    ns main err code: 12564
    TNS-12564: TNS:connection refused
    ns secondary err code: 0
    nt main err code: 0
    nt secondary err code: 0
    nt OS err code: 0
    listener.log:
    27-APR-2004 11:28:42 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=BUILD.OCS.COM)(CID=(PROGRAM=C:\oracle\product\10.1.0\db_1\bin\sqlplus.exe)(HOST=MA-BUILDENV1)(USER=nkancharla))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.180.112)(PORT=2527)) * establish * BUILD.OCS.COM * 12500
    TNS-12500: TNS:listener failed to start a dedicated server process
    TNS-12560: TNS:protocol adapter error
    TNS-00530: Protocol adapter error
    listener.trc with ADMIN on:
    [27-APR-2004 11:28:42:011] nsevwait: 1 newly-posted event(s)
    [27-APR-2004 11:28:42:011] nsevfnt: cxd: 0xd3eed0 stage 0: NT events set:
         CONNECTION REQUEST
    [27-APR-2004 11:28:42:011] nsevfnt: cxd: 0xd3eed0 stage 0: NS events set:
         INCOMING CALL
    [27-APR-2004 11:28:42:011] nsevwait: event is 0x1, on 2
    [27-APR-2004 11:28:42:011] nsevwait: 1 posted event(s)
    [27-APR-2004 11:28:42:011] nsglhe: entry
    [27-APR-2004 11:28:42:011] nsmal: 536 bytes at 0xd7c1f0
    [27-APR-2004 11:28:42:011] nsmal: 1632 bytes at 0xd7e638
    [27-APR-2004 11:28:42:011] nsopen: opening transport...
    [27-APR-2004 11:28:42:011] nttcon: entry
    [27-APR-2004 11:28:42:011] nttcon: toc = 3
    [27-APR-2004 11:28:42:011] nttcnp: entry
    [27-APR-2004 11:28:42:011] ntvlin: entry
    [27-APR-2004 11:28:42:011] ntvlin: exit
    [27-APR-2004 11:28:42:011] nttcnp: Validnode Table IN use; err 0x0
    [27-APR-2004 11:28:42:011] nttcnp: getting sockname
    [27-APR-2004 11:28:42:011] nttcnp: exit
    [27-APR-2004 11:28:42:011] nttcnr: entry
    [27-APR-2004 11:28:42:011] nttcnr: waiting to accept a connection.
    [27-APR-2004 11:28:42:011] nttcnr: getting sockname
    [27-APR-2004 11:28:42:011] nttcnr: connected on ipaddr 192.168.180.112
    [27-APR-2004 11:28:42:011] nttvlser: entry
    [27-APR-2004 11:28:42:011] nttvlser: valid node check on incoming node 192.168.180.112
    [27-APR-2004 11:28:42:011] nttvlser: Accepted Entry: 192.168.180.112
    [27-APR-2004 11:28:42:011] nttcnr: exit
    [27-APR-2004 11:28:42:011] nttcon: set TCP_NODELAY on 248
    [27-APR-2004 11:28:42:011] nttcon: exit
    [27-APR-2004 11:28:42:011] nsopen: transport is open
    [27-APR-2004 11:28:42:011] nsnainit: answer
    [27-APR-2004 11:28:42:011] nsnasvnainfo: NA disabled for this connection
    [27-APR-2004 11:28:42:011] nainit: entry
    [27-APR-2004 11:28:42:011] nagblini: entry
    [27-APR-2004 11:28:42:011] nau_gin: entry
    [27-APR-2004 11:28:42:011] nau_gparams: entry
    [27-APR-2004 11:28:42:011] nam_gbp: Reading parameter "sqlnet.authentication_required" from parameter file
    [27-APR-2004 11:28:42:011] nam_gbp: Parameter not found
    [27-APR-2004 11:28:42:011] nau_gparams: Using default value "FALSE"
    [27-APR-2004 11:28:42:011] nau_gslf: entry
    [27-APR-2004 11:28:42:011] nam_gic: entry
    [27-APR-2004 11:28:42:011] nam_gic: Counting # of items in "sqlnet.authentication_services" parameter
    [27-APR-2004 11:28:42:011] nam_gic: Parameter not found
    [27-APR-2004 11:28:42:011] nam_gic: Found 0 items
    [27-APR-2004 11:28:42:011] nam_gic: exit
    [27-APR-2004 11:28:42:011] nau_gslf: Using default value "all available adapters"
    [27-APR-2004 11:28:42:011] nauss_set_state: entry
    [27-APR-2004 11:28:42:011] nauss_set_state: exit
    [27-APR-2004 11:28:42:011] nau_gslf: exit
    [27-APR-2004 11:28:42:011] nau_gparams: exit
    [27-APR-2004 11:28:42:011] nau_gin: exit
    [27-APR-2004 11:28:42:011] nagblini: exit
    [27-APR-2004 11:28:42:011] na_saveprot: entry
    [27-APR-2004 11:28:42:011] na_saveprot: exit
    [27-APR-2004 11:28:42:011] nacomin: entry
    [27-APR-2004 11:28:42:011] nas_init: entry
    [27-APR-2004 11:28:42:011] nas_init: exit
    [27-APR-2004 11:28:42:011] nau_ini: entry
    [27-APR-2004 11:28:42:011] naugcp_get_connect_parameters: entry
    [27-APR-2004 11:28:42:011] nauss_set_state: entry
    [27-APR-2004 11:28:42:011] nauss_set_state: exit
    [27-APR-2004 11:28:42:011] naugcp_get_connect_parameters: exit
    [27-APR-2004 11:28:42:011] nau_gettab: entry
    [27-APR-2004 11:28:42:011] nau_gettab: exit
    [27-APR-2004 11:28:42:011] nau_sini: entry
    [27-APR-2004 11:28:42:011] nau_sini: exit
    [27-APR-2004 11:28:42:011] nau_ini: exit
    [27-APR-2004 11:28:42:011] naeeinit: entry
    [27-APR-2004 11:28:42:011] nam_gbp: Reading parameter "SQLNET.FIPS_140" from parameter file
    [27-APR-2004 11:28:42:011] nam_gbp: Parameter not found
    [27-APR-2004 11:28:42:011] nam_gnsp: Reading parameter "SQLNET.ENCRYPTION_SERVER" from parameter file
    [27-APR-2004 11:28:42:011] nam_gnsp: Parameter not found
    [27-APR-2004 11:28:42:011] naequad: Using default value "ACCEPTED"
    [27-APR-2004 11:28:42:011] nam_gic: entry
    [27-APR-2004 11:28:42:011] nam_gic: Counting # of items in "SQLNET.ENCRYPTION_TYPES_SERVER" parameter
    [27-APR-2004 11:28:42:011] nam_gic: Parameter not found
    [27-APR-2004 11:28:42:011] nam_gic: exit
    [27-APR-2004 11:28:42:011] naesno: Using default value "all available algorithms"
    [27-APR-2004 11:28:42:011] naeshow: entry
    [27-APR-2004 11:28:42:011] naeshow: exit
    [27-APR-2004 11:28:42:011] naeeinit: exit
    [27-APR-2004 11:28:42:011] naecinit: entry
    [27-APR-2004 11:28:42:011] nam_gnsp: Reading parameter "SQLNET.CRYPTO_CHECKSUM_SERVER" from parameter file
    [27-APR-2004 11:28:42:011] nam_gnsp: Parameter not found
    [27-APR-2004 11:28:42:011] naequad: Using default value "ACCEPTED"
    [27-APR-2004 11:28:42:011] nam_gic: entry
    [27-APR-2004 11:28:42:011] nam_gic: Counting # of items in "SQLNET.CRYPTO_CHECKSUM_TYPES_SERVER" parameter
    [27-APR-2004 11:28:42:011] nam_gic: Parameter not found
    [27-APR-2004 11:28:42:011] nam_gic: exit
    [27-APR-2004 11:28:42:011] naesno: Using default value "all available algorithms"
    [27-APR-2004 11:28:42:011] naeshow: entry
    [27-APR-2004 11:28:42:011] naeshow: exit
    [27-APR-2004 11:28:42:011] naecinit: exit
    [27-APR-2004 11:28:42:011] nadisc: entry
    [27-APR-2004 11:28:42:011] nacomtm: entry
    [27-APR-2004 11:28:42:011] nacompd: entry
    [27-APR-2004 11:28:42:011] nacompd: exit
    [27-APR-2004 11:28:42:011] nacompd: entry
    [27-APR-2004 11:28:42:011] nacompd: exit
    [27-APR-2004 11:28:42:011] nacomtm: exit
    [27-APR-2004 11:28:42:011] nas_dis: entry
    [27-APR-2004 11:28:42:011] nas_dis: exit
    [27-APR-2004 11:28:42:011] nau_dis: entry
    [27-APR-2004 11:28:42:011] nau_dis: exit
    [27-APR-2004 11:28:42:011] naeetrm: entry
    [27-APR-2004 11:28:42:011] naeetrm: exit
    [27-APR-2004 11:28:42:011] naectrm: entry
    [27-APR-2004 11:28:42:011] naectrm: exit
    [27-APR-2004 11:28:42:011] nagbltrm: entry
    [27-APR-2004 11:28:42:011] nau_gtm: entry
    [27-APR-2004 11:28:42:011] nau_gtm: exit
    [27-APR-2004 11:28:42:011] nagbltrm: exit
    [27-APR-2004 11:28:42:011] nadisc: exit
    [27-APR-2004 11:28:42:011] nainit: exit
    [27-APR-2004 11:28:42:011] nsnainit: NS Connection version: 313
    [27-APR-2004 11:28:42:011] nsnainit: inf->nsinfflg[0]: 0xd inf->nsinfflg[1]: 0xd
    [27-APR-2004 11:28:42:011] nsnainit: "or" info flags: 0xd     Translations follow:
         native service(s) is (are) wanted
         NA disabled remotely for this connection
         NA services unavailable on both processes - negotiation not needed
    [27-APR-2004 11:28:42:011] nsnainit: "or" info flags: 0xd     Translations follow:
         native service(s) is (are) wanted
         NA disabled remotely for this connection
         NA services unavailable on both processes - negotiation not needed
    "and" info flags: 0xd     Translations follow:
         native service(s) is (are) wanted
         NA disabled remotely for this connection
         NA services unavailable on both processes - negotiation not needed
    [27-APR-2004 11:28:42:011] nsopen: global context check-in (to slot 7) complete
    [27-APR-2004 11:28:42:011] nsopen: lcl[0]=0x34ffefff, lcl[1]=0x12003, gbl[0]=0x7abf, gbl[1]=0x2001, tdu=32767, sdu=8192
    [27-APR-2004 11:28:42:011] nsdo: cid=7, opcode=65, bl=0, what=0, uflgs=0x0, cflgs=0x2
    [27-APR-2004 11:28:42:011] nsdo: rank=64, nsctxrnk=0
    [27-APR-2004 11:28:42:011] nsdo: nsctx: state=7, flg=0x4000, mvd=0
    [27-APR-2004 11:28:42:011] nsdo: nsctxrnk=0
    [27-APR-2004 11:28:42:011] nsanswer: deferring connect attempt; at stage 5
    [27-APR-2004 11:28:42:011] nsevreg: begin registration process for 7
    [27-APR-2004 11:28:42:011] nsevreg: sgt=0, evn=4, evt[2]=0x0
    [27-APR-2004 11:28:42:011] nsevreg: begin notification process for 7
    [27-APR-2004 11:28:42:011] nsrah: setting transport read mode (2)
    [27-APR-2004 11:28:42:011] nttctl: entry
    [27-APR-2004 11:28:42:011] nttctl: Clearing non-blocking mode
    [27-APR-2004 11:28:42:011] nttctl: entry
    [27-APR-2004 11:28:42:011] nttctl: Setting connection into async mode
    [27-APR-2004 11:28:42:011] nsevreg: rdm=2, sgt=0, evt[0]=0x20, [1]=0x20, [2]=0x0, nrg=0
    [27-APR-2004 11:28:42:011] nsevreg: registering for 0x20
    [27-APR-2004 11:28:42:011] nttmrd: entry
    [27-APR-2004 11:28:42:011] nttrd: entry
    [27-APR-2004 11:28:42:011] snttcallback: entry
    [27-APR-2004 11:28:42:011] snttcallback: exit
    [27-APR-2004 11:28:42:011] nttrd: socket 248 had bytes read=316
    [27-APR-2004 11:28:42:011] nttrd: exit
    [27-APR-2004 11:28:42:011] nsglhe: exit
    [27-APR-2004 11:28:42:011] nsevwait: 7 registered connection(s)
    [27-APR-2004 11:28:42:011] nsevwait: 1 pre-posted event(s)
    [27-APR-2004 11:28:42:011] nsevwait: waiting for transport event (0 thru 7)...
    [27-APR-2004 11:28:42:011] nsevwait: 0 newly-posted event(s)
    [27-APR-2004 11:28:42:011] nsevwait: 1 pre-posted event(s)
    [27-APR-2004 11:28:42:011] nsevdansw: at STAGE 5
    [27-APR-2004 11:28:42:011] nsdo: cid=7, opcode=68, bl=2040, what=8, uflgs=0x0, cflgs=0x3
    [27-APR-2004 11:28:42:011] nsdo: rank=64, nsctxrnk=0
    [27-APR-2004 11:28:42:011] nsdo: nsctx: state=14, flg=0x4004, mvd=0
    [27-APR-2004 11:28:42:011] nsdo: gtn=10, gtc=10, ptn=10, ptc=8155
    [27-APR-2004 11:28:42:011] nscon: doing connect handshake...
    [27-APR-2004 11:28:42:011] nscon: recving a packet
    [27-APR-2004 11:28:42:011] nsprecv: 316 bytes from leftover
    [27-APR-2004 11:28:42:011] nsprecv: tlen=316, plen=58, type=1
    [27-APR-2004 11:28:42:011] nsprecv: 258 bytes to leftover
    [27-APR-2004 11:28:42:011] nscon: got NSPTCN packet
    [27-APR-2004 11:28:42:011] nsconneg: vsn=313, lov=300, opt=0x0, sdu=2048, tdu=32767, ntc=0x860e
    [27-APR-2004 11:28:42:011] nsconneg: vsn=313, gbl=0x1, sdu=2048, tdu=32767
    [27-APR-2004 11:28:42:011] nscon: got 248 bytes connect data
    [27-APR-2004 11:28:42:011] nscon: got 248 bytes connect data
    [27-APR-2004 11:28:42:011] nsdo: nsctxrnk=0
    [27-APR-2004 11:28:42:011] nsevdrcvreq: recving connect data
    [27-APR-2004 11:28:42:011] nsdo: cid=7, opcode=68, bl=248, what=1, uflgs=0x4001, cflgs=0x0
    [27-APR-2004 11:28:42:011] nsdo: nsctx: state=2, flg=0x4004, mvd=0
    [27-APR-2004 11:28:42:011] nsdo: gtn=58, gtc=58, ptn=10, ptc=2011
    [27-APR-2004 11:28:42:011] nsrdr: recving a packet
    [27-APR-2004 11:28:42:011] nsprecv: 258 bytes from leftover
    [27-APR-2004 11:28:42:011] nsprecv: tlen=258, plen=258, type=6
    [27-APR-2004 11:28:42:011] nsrdr: got NSPTDA packet
    [27-APR-2004 11:28:42:011] nsrdr: NSPTDA flags: 0x0
    [27-APR-2004 11:28:42:011] nsdo: what=1, bl=248
    [27-APR-2004 11:28:42:011] nsdo: 248 bytes from NS buffer
    [27-APR-2004 11:28:42:011] nsevdrcvreq: got 248 bytes connect data
    [27-APR-2004 11:28:42:011] nsevdansw: exit
    [27-APR-2004 11:28:42:011] nsevwait: event is 0x20, on 7
    [27-APR-2004 11:28:42:011] nsevwait: 1 posted event(s)
    [27-APR-2004 11:28:42:011] nsglhe: entry
    [27-APR-2004 11:28:42:011] nsglfc: Assume establishing a connection...
    [27-APR-2004 11:28:42:011] nsglfc: command = establish
    [27-APR-2004 11:28:42:011] nsglauthorized: entry
    [27-APR-2004 11:28:42:011] nsglecmd: entry
    [27-APR-2004 11:28:42:011] nttaddr2bnd: entry
    [27-APR-2004 11:28:42:011] nttaddr2bnd: exit
    [27-APR-2004 11:28:42:011] nsglbgetRSPidx: entry
    [27-APR-2004 11:28:42:011] nsglbgetRSPidx: returning ecode=0
    [27-APR-2004 11:28:42:011] nsglbgetRSPidx: exit
    [27-APR-2004 11:28:42:011] nsglb: entry
    [27-APR-2004 11:28:42:011] nsglb: exit
    [27-APR-2004 11:28:42:011] nsc2addr: (ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oraclebuild)(ARGS='(LOCAL=NO)'))
    [27-APR-2004 11:28:42:011] nlpcaini: entry
    [27-APR-2004 11:28:42:011] nlpcaini: prg = oracle
    [27-APR-2004 11:28:42:011] nlpcaini: arg[0] = oraclebuild
    [27-APR-2004 11:28:42:011] nlpcaini: arg[1] = (LOCAL=NO)
    [27-APR-2004 11:28:42:011] nlpcaini: exit
    [27-APR-2004 11:28:42:011] nsbeqaddr: connecting...
    [27-APR-2004 11:28:42:011] ntpcon: entry
    [27-APR-2004 11:28:42:011] ntpcon: toc = 1
    [27-APR-2004 11:28:42:011] sntpcall: entry
    [27-APR-2004 11:28:42:011] snlpcss: entry
    [27-APR-2004 11:28:42:011] snlpcss: Unable to spawn Oracle oracle (LOCAL=NO) build, error 258.
    [27-APR-2004 11:28:42:011] sntpcall: exit
    [27-APR-2004 11:28:42:011] ntpcon: exit
    [27-APR-2004 11:28:42:011] nserror: nsres: id=7, op=72, ns=12560, ns2=0; nt[0]=530, nt[1]=0, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
    [27-APR-2004 11:28:42:011] nsglrespond: entry
    [27-APR-2004 11:28:42:011] nsdo: cid=7, opcode=67, bl=161, what=10, uflgs=0x0, cflgs=0x3
    [27-APR-2004 11:28:42:011] nsdo: rank=64, nsctxrnk=0
    [27-APR-2004 11:28:42:011] nsdo: nsctx: state=2, flg=0x4004, mvd=0
    [27-APR-2004 11:28:42:011] nsdo: gtn=258, gtc=258, ptn=10, ptc=2011
    [27-APR-2004 11:28:42:011] nscon: sending NSPTRF packet
    [27-APR-2004 11:28:42:011] nspsend: plen=173, type=4
    [27-APR-2004 11:28:42:011] nttmwr: entry
    [27-APR-2004 11:28:42:011] nttwr: entry
    [27-APR-2004 11:28:42:011] snttcallback: entry
    [27-APR-2004 11:28:42:011] snttcallback: exit
    [27-APR-2004 11:28:42:011] nttwr: socket 248 had bytes written=173
    [27-APR-2004 11:28:42:011] nttwr: exit
    [27-APR-2004 11:28:42:011] nspsend: 173 bytes to transport
    [27-APR-2004 11:28:42:011] nsdo: nsctxrnk=0
    [27-APR-2004 11:28:42:011] nstimarmed: no timer allocated
    [27-APR-2004 11:28:42:011] nttctl: entry
    [27-APR-2004 11:28:42:011] nttctl: entry
    [27-APR-2004 11:28:42:011] nsdo: cid=7, opcode=66, bl=0, what=0, uflgs=0x0, cflgs=0x2
    [27-APR-2004 11:28:42:011] nsdo: rank=64, nsctxrnk=0
    [27-APR-2004 11:28:42:011] nsdo: nsctx: state=2, flg=0x4000, mvd=0
    [27-APR-2004 11:28:42:011] nsevunreg: cid=7, sgt=0, rdm=2
    [27-APR-2004 11:28:42:011] nsrah: re-setting transport read mode
    [27-APR-2004 11:28:42:011] nttctl: entry
    [27-APR-2004 11:28:42:011] nttctl: Clearing async mode
    [27-APR-2004 11:28:42:011] nsevunreg: 6 registered connection(s)
    [27-APR-2004 11:28:42:011] nsdo: nsctxrnk=0
    [27-APR-2004 11:28:42:011] nsclose: closing transport
    [27-APR-2004 11:28:42:011] nttdisc: entry
    [27-APR-2004 11:28:42:011] nttdisc: Closed socket 248
    [27-APR-2004 11:28:42:011] nttdisc: exit
    [27-APR-2004 11:28:42:011] nsclose: global context check-out (from slot 7) complete
    [27-APR-2004 11:28:42:011] nsmfr: 1632 bytes at 0xd7e638
    [27-APR-2004 11:28:42:011] nsmfr: 536 bytes at 0xd7c1f0
    [27-APR-2004 11:28:42:011] nsgldissolve: entry
    [27-APR-2004 11:28:42:011] nsgldissolve: Deallocating cxd 0xd7c608.
    [27-APR-2004 11:28:42:011] nsgldissolve: exit
    [27-APR-2004 11:28:42:011] nsglrespond: exit
    [27-APR-2004 11:28:42:011] nsglecmd: exit
    [27-APR-2004 11:28:42:011] nsglhe: exit
    [27-APR-2004 11:28:42:011] nsevwait: 6 registered connection(s)
    [27-APR-2004 11:28:42:011] nsevwait: 0 pre-posted event(s)
    [27-APR-2004 11:28:42:011] nsevwait: waiting for transport event (0 thru 6)...
    [27-APR-2004 11:28:45:136] snttcallback: entry
    [27-APR-2004 11:28:45:136] snttcallback: op = 5, bytes = 170, err = 0
    [27-APR-2004 11:28:45:136] snttcallback: exit
    [27-APR-2004 11:28:45:136] nsevwait: 0 newly-posted event(s)
    [27-APR-2004 11:28:45:136] nsevfnt: cxd: 0xd597c8 stage 0: NT events set:
         READ
    [27-APR-2004 11:28:45:136] nsevfnt: cxd: 0xd597c8 stage 0: NS events set:
         INCOMING SEND
    [27-APR-2004 11:28:45:136] nsevwait: event is 0x2, on 4
    [27-APR-2004 11:28:45:136] nsevwait: 1 posted event(s)
    [27-APR-2004 11:28:45:136] nsglhe: entry
    [27-APR-2004 11:28:45:136] nsglrohe: entry
    [27-APR-2004 11:28:45:136] nsdo: cid=4, opcode=68, bl=8196, what=0, uflgs=0x0, cflgs=0x3
    [27-APR-2004 11:28:45:136] nsdo: rank=64, nsctxrnk=0
    [27-APR-2004 11:28:45:136] nsdo: nsctx: state=8, flg=0x400c, mvd=0
    [27-APR-2004 11:28:45:136] nsdo: gtn=258, gtc=258, ptn=10, ptc=8155
    [27-APR-2004 11:28:45:136] nsrdr: recving a packet
    [27-APR-2004 11:28:45:136] nsprecv: 170 bytes from leftover
    [27-APR-2004 11:28:45:136] nsprecv: tlen=170, plen=170, type=6
    [27-APR-2004 11:28:45:136] nttmrd: entry
    [27-APR-2004 11:28:45:136] nttrd: entry
    [27-APR-2004 11:28:45:136] ntt2err: entry
    [27-APR-2004 11:28:45:136] ntt2err: soc 296 error - operation=5, ntresnt[0]=524, ntresnt[1]=997, ntresnt[2]=0
    [27-APR-2004 11:28:45:136] ntt2err: exit
    [27-APR-2004 11:28:45:136] nttrd: exit
    [27-APR-2004 11:28:45:136] nsrdr: got NSPTDA packet
    [27-APR-2004 11:28:45:136] nsrdr: NSPTDA flags: 0x0
    [27-APR-2004 11:28:45:136] nsdo: what=1, bl=8196
    [27-APR-2004 11:28:45:136] nsdo: 160 bytes from NS buffer
    [27-APR-2004 11:28:45:136] nsdo: nsctxrnk=0
    [27-APR-2004 11:28:45:136] nsglgrDoRegister: inst loads: ld1:51 mld1:100 ld2:12 mld2:445
    [27-APR-2004 11:28:45:136] nsglgrDoRegister: exit
    [27-APR-2004 11:28:45:136] nsdo: cid=4, opcode=67, bl=68, what=1, uflgs=0x2, cflgs=0x3
    [27-APR-2004 11:28:45:136] nsdo: rank=64, nsctxrnk=0
    [27-APR-2004 11:28:45:136] nsdo: nsctx: state=8, flg=0x400c, mvd=0
    [27-APR-2004 11:28:45:136] nsdo: gtn=170, gtc=170, ptn=10, ptc=8155
    [27-APR-2004 11:28:45:136] nsdo: 68 bytes to NS buffer
    [27-APR-2004 11:28:45:136] nsdofls: DATA flags: 0x0
    [27-APR-2004 11:28:45:136] nsdofls: sending NSPTDA packet
    [27-APR-2004 11:28:45:136] nspsend: plen=78, type=6
    [27-APR-2004 11:28:45:136] nttmwr: entry
    [27-APR-2004 11:28:45:136] nttwr: entry
    [27-APR-2004 11:28:45:136] snttcallback: entry
    [27-APR-2004 11:28:45:136] snttcallback: exit
    [27-APR-2004 11:28:45:136] nttwr: socket 296 had bytes written=78
    [27-APR-2004 11:28:45:136] nttwr: exit
    [27-APR-2004 11:28:45:136] nspsend: 78 bytes to transport
    [27-APR-2004 11:28:45:136] nsdoacts: flushing transport
    [27-APR-2004 11:28:45:136] nttctl: entry
    [27-APR-2004 11:28:45:136] nsdo: nsctxrnk=0
    [27-APR-2004 11:28:45:136] nsglroHandleError: exit
    [27-APR-2004 11:28:45:136] nsglrohe: exit
    [27-APR-2004 11:28:45:136] nsglhe: exit
    [27-APR-2004 11:28:45:136] nsevwait: 6 registered connection(s)
    [27-APR-2004 11:28:45:136] nsevwait: 0 pre-posted event(s)
    [27-APR-2004 11:28:45:136] nsevwait: waiting for transport event (0 thru 6)...

  • APP-DT-34605:Oracle error ORA-4098 occured while writing to PER_ALL_ASSIGNM

    We have Upgraded DB from 10.2.0.2 to 10.2.0.5 having same Apps version 11.5.10.2,
    we have seen below issue upon upgrade,
    While updating any information in Assignment i.e. Assignment Status getting following error.
    APP-DT-34605:Oracle error ORA-4098 occured while writing to PER_ALL_ASSIGNMENTS_F
    How to overcome these errors, please advise,
    RM

    Please see these docs.
    PERWSHRG: Updating Assignment Gives Error APP-DT-34605 ORA-6510 [ID 286294.1]
    Update Employee Assignment Details Cause Error: APP-DT-34605-- ORA-20001 occurred writing to PER_ALL_ASSIGNMENTS_F [ID 793451.1]
    APP-DT-34605 Error When Saving on Assignment Form [ID 829292.1]
    Receive APP-DT-34605 Error When Updating an Existing Payment Method [ID 780090.1]
    ORA-06508 PL/SQL Could Not Find Program Unit Being Called: "APPS.PAY_PAY_SHD" [ID 1170903.1]
    Thanks,
    Hussein

  • Oracle error ORA-01461when trying to insert into an ORACLE BLOB field

    I am getting Oracle error ‘ORA-01461: can bind a LONG value only  for insert into a LONG column' when trying to insert into an ORACLE BLOB field. The error occurs when trying to insert a large BLOB (JPG), but does not occur when inserting a small (<1K) picture BLOB.(JPG). Any ideas?
    BTW, when using a SQL Server datasource using the same code.... everything works with no problems.
    ORACLE version is 11.2.0.1
    The ORACLE datasource is JDBC using Oracle's JDBC driver ojdbc6.jar v11.2.0.1 (I also have tried ojdbc5.jar v11.2.0.1; ojdbc5.jar v11.2.0.4; and ojdbc6.jar v11.2.0.4 with the same error result.)
    Here is my code:
    <cfset file_mime = Lcase(Right(postedXMLRoot.objname.XmlText, 3))>
    <cfif file_mime EQ 'jpg'><cfset file_mime = 'jpeg'></cfif>
    <cfset file_mime = 'data:image/' & file_mime & ';base64,'>
    <cfset image64 = ImageReadBase64("#file_mime##postedXMLRoot.objbase64.XmlText#")>
    <cfset ramfile = "ram://" & postedXMLRoot.objname.XmlText>
    <cfimage action="write" source="#image64#" destination="#ramfile#" overwrite="true">
    <cffile action="readbinary" file="#ramfile#" variable="image_bin">
    <cffile action="delete" file="#ramfile#">
    <cfquery name="InsertImage" datasource="#datasource#">
    INSERT INTO test_images
    image_blob
    SELECT
    <cfqueryparam value="#image_bin#" cfsqltype="CF_SQL_BLOB">
    FROM          dual
    </cfquery>

    Can't you use "alter index <shema.spatial_index_name> rebuild ONLINE" ? Thanks. I could switch to "rebuild ONLINE" and see if that helps. Are there any potential adverse effects going forward, e.g. significantly longer rebuild than not using the ONLINE keyword, etc? Also wondering if spatial index operations (index type = DOMAIN) obey all the typical things you'd expect with "regular" indexes, e.g. B-TREE, etc.

  • Using PreparedStatement and the Oracle Error ORA-1000

    Hi,
    I have a question about PreparedStatement objects that is not so simple to explain for me. What I would like to know is: if I use a PreparedStatement following traditional and generic steps:
    1- PreparedStatement pStmt = Connection.prepareStatement(sQuery);
    2- pStmt.setXXX(i,j);
    n - pStmt.setXXX(i,j);
    n+1 - ResultSet rs = pStmt.executeQuery();
    n+2 - while(rs.next()){ ... retrive ResultSet data  ... }
    n+3 - rs.close()
    n+4 - back to point number 2
    and at the end (as you can see in the point numbered n+4), instead of closing the PreparedStatement pStmt using the close() method, I reuse the PreparedStatement pStmt comeing back to the point numebr 2 and setting again all its parameters with new values ... then ... what heppens in the Oracle database ? Has been the cursor (so the mamory area), associated to my PreparedStatement object pStmt, duplicated or is it the same ?
    I know that Java allows you to do this kind of operations with PreparedStatement, and I know that in tha Java Documentation is explained to follow this strategy to optimize the execution time because in this way the same PreparedStatement is precompiled and prepared only once. But if I do a for loop following the steps explained before, after many iterations I have the error "ORA-1000: maximum open cursors exceeded". This error is the reason of my question. Does this error means that it's mandatory to close a PreparedStatement always, otherwise if you reuse it without closing it then the corresponding database cursor will be duplicated ? If it is so, then I think this is a contradiction with official java documentation ...
    I'm using Oracle8i (version 8.1.7) and Oracle JDBC Thin Driver (Windows NT) for use with JDK 1.2.x. Moreover, in my database istance the parameter "maximum open cursor" is equal to 800 ...
    Thank you very much for suggestions :-)

    There is no need to close a prepared statement or its resultset for every iteration.
    After the first iteration in a loop, all subsequent executions of it will close the previous resultset. By adding close() method, you are making one extra costly call to the DB for no reason.
    Following is the sample code.I know what you are saying. In fact at the beginning I wrote my code in the same way of your sample (see the code of my first post at the begin of this page).
    But doing so, after thousand iterations of the loop, I had "Oracle Error ORA-1000 : maximun open cursor exeeded" even if in my database istance the parameter "maximum open cursor" is equal to 8000.
    At this moment in my code, for each iteration, I close the PreparedStatement and in this way I don't have anymore the error :-((
    So it seems that only in theory we can reuse a preparedStatement without closing it. In fact if we see the oracle system table "$open_cursor" (as Konrad Pietzka suggest me) we can find that, for each interation,
    at our line code "rs = pstmt.executeQuery();" correspond a new cursor in the database: this means that for each method "pstmt.executeQuery()" the database open a new cursor and do not use the previous one as it should.
    I posted a question two months ago to search if someone had the same problem (it seems that Konrad Pietzka had the same situation) and was able to explain me what is the cause.
    The only reason I found by myself for this problem, is that probably the Oracle JDBC Thin Driver for Windows NT/2000 has some bugs... but I'm not sure ...
    Thank you very much for you time !!
    bye :-))
    Fidalma

  • Urgent-Oracle Error :: ORA-39778-

    Hi
    I got following Oracle Error : ORA-39778 "the parallel load option is not allowed when loading lob columns" on production. yesterday we updated database with patchset 9.2.0.7 and DST/JVM compliant.
    Please reply me ASAP.
    Regards,
    RJ

    Sry I didn't check back this afternoon.
    As posted,
    Here's the note from metalink doc Note:396387.1
    Then e this to apply the files manually in the following way:
    Download the identified patch.
    Unzip the patch, and locate the 2 files timezone.dat and timezlrg.dat in the "files/oracore/zoneinfo" directory of the uncompressed patch (or from the relevant .jar file of a patchset). If there is also a readme.txt in this location then make a note of this as well.
    Backup your existing files in $ORACLE_HOME/oracore/zoneinfo - THIS CAN BE VITAL, DO NOT SKIP.
    Copy the 2 .dat files and possibly the readme.txt file that were found in step 2 into the $ORACLE_HOME/oracore/zoneinfo directory.
    Restart the database (in case of installation on a database), or restart the client applications (in case of client install). Note that the database did not need to be down before the time zone files were applied, but it does need to be restarted afterwards.

  • Oracle error ORA-22905: cannot access rows from a non-nested table item

    Oracle error ORA-22905: cannot access rows from a non-nested table item
    Creating a report using oracle plsql code .
    Getting error ;
    Oracle error ORA-22905: cannot access rows from a non-nested table item
    when I am trying to pass data in clause in pl sql proc
    basically I have a proc which takes 2 parameters(a and b)
    proc (
    P_a varchar2,
    p_b varchar2,
    OUT SYS_REFCURSOR
    culprit code which is giving me  the error and on google they say cast it but I dont know how to do it in my context
    --where  id in (
    --        SELECT * FROM THE (SELECT p_cd_common.get_table_from_string(P_a) FROM dual)
    --        union
    --        SELECT * FROM THE (SELECT p_cd_common.get_table_from_string(P_b) FROM dual)
    data sample returned from this :SELECT * FROM THE (SELECT p_cd_common.get_table_from_string(P_a) FROM dual)
    'Abc','def',
    data sample returned from this;SELECT * FROM THE (SELECT p_cd_common.get_table_from_string(P_b) FROM dual)
    'fgd','fth',
    Any answers ?
    How to pass data in clause in a better way

    Why are you creating a duplicate post? I already asked you to post p_cd_common.get_table_from_string. In particular what is function return type and where it is declared. As I already mentioned, most likely function return type is declared in the package and therefore is PL/SQL type. And TABLE operator can only work with SQL types.
    SY.

  • Oracle error ORA-604 when opening a connection

    I am facing an issue with my WCF service which is using ODP.NET version 4.112.2.0(x64) and Oracle 11g.
    The service runs without any problems on the test servers but on production server (Windows 2008 R2) when an attempt is made to call any service method it fails with the following Oracle error code Ora-604. the message is
    ORA-604: error occurred at recursive SQL level %s
    The exception is thrown when a call to meethod Open is made to open a connection.
    There is no inner exception. So far I have tried checking the connection string, the user permissions and setting the TNS_ADMIN environment variable but nothing has worked.
    Another thing to mention is that another WCF service which uses some of the same stored procedure I am using is working fine on the same server.
    Has anyone seen this before?
    Thanks,
    A

    Do you have a login trigger?
    select * from dba_triggers where triggering_event like 'LOGON%'
    If so, try disabling it.
    Does the working service use the same credentials as this problem service?
    Are you able to connect using sqlplus, with the same credentials from the same client to the same database? If it's not an ODP.NET specific problem, the dba guys might be able to help better: General Database Discussions
    Greg

  • Oracle error ORA-00600 when using Oracle 10g and Sun One Web Server 6.1

    I have a java application that was running under Solaris 8 and Oracle 9i. I am trying to get it up and running on a new server that is configured with Solaris 9 and Oracle 10g. Whenever the application tries to connect to the database it receives the following error: ORA-00600 [ttcgcshnd-1][0]. My research indicates that this is an internal Oracle error that represents a low level unexpected condition. I have looked through my configuration for the Web Server and I have not been able to determine the cause of this problem. My DBA tells me that we have the latest patch installed for Oracle! Has anyone encountered this problem before? Any help would be greatly appreciated!

    If the problem is also present in a SWING app, i.e. outside the web server, then it is porbably something external to the webserver.
    I think you should ensure that the driver and database are compatible with each other. It is very likely that you need a new jdbc driver for the new database.
    download from here http://www.oracle.com/technology/software/tech/java/sqlj_jdbc/htdocs/jdbc101020.html
    try the ojdbc14.jar

Maybe you are looking for

  • Can anyone tell me what a refurbished ipod is?

    Something caught my eye, the refurbished ipod costs less. What is it? Is it brand new, I mean intact? And can you personalize that thing? I don't know which is a good idea to buy, a refurbished one or the normal versions... I am planning to buy the i

  • E-mail no longer working properly

    since a few days ago I can no longer access e-mails completely. I receive them, and can see them in preview, but can longer access the whole e-mail or any attachments. Any Suggestions

  • IPhoto has stopped accepting new and old photos.

    I have a 15" Macbook Pro thats about a year old running the newest version OS-X Tiger (10.4 I think it is). With: 2.2 GHz Intel Core 2 Duo 2 GB 667 MGz DDR2 SDRAM Ok, my problem came to me tonight when I tried to organize my iPhoto library. Through t

  • Mobile Home Sync Issues

    I just setup a 10.5 Server and 10.5 client - Home sync is working, however my login sync is set to do ONLY ~/Library - it seems to search the entire home folder, and syncs what ever has changed - I've tried reseting this and haven't had any luck. It

  • Forms - document download problem

    I have a form on a table with a blob and a mimetype column. The form upload / download works just fine on a http site. The same setup on a https site works for document upload. But the download does not work -- the "Display column content" and "Save