Oracle Express : Express not switching to EDT

Hi,
We have Oracle Express Server 6.2.0.0.0
on NT 4.0 (service pack 6).
This week-end the server leaped ahead 1 hour
automatically (EDT-Eastern Daylight Time).
For some reason, Express is not returning
the EDT time but the previous time.
We tried rebootintg the server.
We also tried shutting down all Express
Services and putting them back up...
Nothing works.
The only way is to change the date
manually (not checking the Automatically
adjust clock... in WinNT date/Time
properties)
Does anyone have an idea why ?
Thanks,
SLB.
null

It sounds like OES is getting the time from teh CMOS setting instead of the o/s. Microsoft is altering the time within the o/s (not the cmos) .. hence the problem.
Personally, I don't use features like "automatically adjust time", so I've never seen this.

Similar Messages

Can not login to Oracle Application Express after upgrade to 3.2

I installed oracle database express and then I upgrade APEX to 3.2 on it. I got the login page but I can not login by using any account, like SYS, SYSTEM. From the document, internal ADMIN account should exist but I did not see it from dba_users table.
Thanks,
Julie

HI Don,
I did run apxchpwd.sql to change the Application Express ADMIN user password. Then I invoked http://mymachine:8080/apex and got the Application Express login page. I put ADMIN in workspace and ADMIN in Username and the new password. But I still cannot login. I also tried http://mymachine:8080/apex/apex_admin page login. I typed ADMIN as username and the new password. Then I clicked on Login button. Nothing happened. No error message.
Any idea?
By the way, what does apxxepwd.sql do?
Thanks,
Julie

Need help: Silent install of oracle 11g express edition does not install services. As a result, i'm unable to start\launch database

Installing using the GUI works fine. I'm using the following code to perform the silent installation of the oracle client: C:\temp_pyx\Oracle source\3-Oracle 11G Express\setup.exe /S /f1"C:\temp_pyx\Oracle source\3-Oracle 11G Express\response\OracleXe-install.iss" /f2 "c:\windows\logs\paychex\oracle11ginstall.log"
Result code in "oracle11gisntall.log" shows "result = 3"
response file is configured as follows:
** Response file to perform silent install of Oracle Database 11g Express Edition    **
** Values for the following variables are configurable:                              **
** szDir - Provide a valid path                                                      **
** TNSPort - Provide any valid available port number                                 **
** MTSPort - Provide any valid available port number                                 **
** HTTPPort - Provide any valid available port number                                **
** SYSPassword - Provide a valid password string                                     **
[{05A7B662-80A3-4EB9-AE1D-89A62449431C}-DlgOrder]
Dlg0={05A7B662-80A3-4EB9-AE1D-89A62449431C}-SdWelcome-0
Count=7
Dlg1={05A7B662-80A3-4EB9-AE1D-89A62449431C}-SdLicense2Rtf-0
Dlg2={05A7B662-80A3-4EB9-AE1D-89A62449431C}-SdComponentDialog-0
Dlg3={05A7B662-80A3-4EB9-AE1D-89A62449431C}-AskPort-13013
Dlg4={05A7B662-80A3-4EB9-AE1D-89A62449431C}-AskSYSPassword-13011
Dlg5={05A7B662-80A3-4EB9-AE1D-89A62449431C}-SdStartCopy-0
Dlg6={05A7B662-80A3-4EB9-AE1D-89A62449431C}-SdFinish-0
[{05A7B662-80A3-4EB9-AE1D-89A62449431C}-SdWelcome-0]
Result=1
[{05A7B662-80A3-4EB9-AE1D-89A62449431C}-SdLicense2Rtf-0]
Result=1
[{05A7B662-80A3-4EB9-AE1D-89A62449431C}-SdComponentDialog-0]
szDir=C:\programdata\oraclexe
Component-type=string
Component-count=1
Component-0=DefaultFeature
Result=1
[{05A7B662-80A3-4EB9-AE1D-89A62449431C}-AskPort-13013]
TNSPort=1521
MTSPort=2031
HTTPPort=8080
Result=1
[{05A7B662-80A3-4EB9-AE1D-89A62449431C}-AskSYSPassword-13011]
SYSPassword="Intentionally left blank"
Result=1
[{05A7B662-80A3-4EB9-AE1D-89A62449431C}-SdStartCopy-0]
Result=1
[{05A7B662-80A3-4EB9-AE1D-89A62449431C}-SdFinish-0]
Result=1
bOpt1=0
bOpt2=0

I only see the following folders after install, which tells me that although the program shows up in program and features, it is still not successfully installed?

Not able to install Oracle 10g Express on linux 64bit based on Dude's intr

I followed "https://forums.oracle.com/forums/thread.jspa?threadID=2200434" to install oracle 10g xe on Ubuntu 10.10 AMD 64-bit
but I ran into below error while I was trying to install 10g XE on linux 64bit
root@vdevluxcnhz0021:~# dpkg -i force-architecture libaio_0.3.104-1_i386.deb --------- this step is error
dpkg: warning: overriding problem because --force enabled:
package architecture (i386) does not match system (amd64)
dpkg: regarding libaio_0.3.104-1_i386.deb containing libaio:
libaio1 conflicts with libaio
libaio (version 0.3.104-1) is to be installed.
dpkg: error processing libaio_0.3.104-1_i386.deb (--install):
conflicting packages - not installing libaio
Errors were encountered while processing:
libaio_0.3.104-1_i386.deb
Linux version
root@vdevluxcnhz0021:~# cat /etc/issue
Ubuntu 10.04.2 LTS \n \l
root@vdevluxcnhz0021:~# cat /proc/version
Linux version 2.6.32-28-server (buildd@allspice) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #55-Ubuntu SMP Mon Jan 10 23:57:16 UTC 2011
Can you please help on this?
Thanks
Edited by: user1997872 on Jan 4, 2012 7:07 AM

It looks like you will have to uninstall "libaio1", but I don't know for sure and don't have Ubuntu 10.4 available right now to play with.
Sorry but the instructions are for Ubuntu 10.10, not 10.4, which is different.
If you need to install XE on Ubuntu, I'd rather suggest 11gR2 XE:
Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto
Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto
Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 how-to
Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 howto

Not installing Oracle 10g Express Edition Beta 2

Hi,
I am in problem to install Oracle 10g Express Edition Beta 2 on Windows 2000 Pro. I have download OracleXE.exe but when i am double clicking on it, it is not working. What are the problems? Please help me
Dulal

Hello,
Oracle 10g XE is rather specific and, I'm not sure that you can upgrade it to 10.2.0.4 .
However, Oracle published an Upgrade Guide for Oracle Express Edition but, it's limited to *10.2.0.3*:
http://download.oracle.com/docs/cd/B25329_01/doc/server.102/b32391/toc.htm
But be careful:
Once you have upgraded to Oracle Database 10g, you cannot downgrade back to Oracle Database Express Edition.Hope this help.
Best regards,
Jean-Valentin
Edited by: Lubiez Jean-Valentin on May 22, 2010 12:06 AM

Not able to create partitions using Oracle 10g express edition

Hello Everyone,
I downloaded Oracle 10g express edition as the documentation for the same says that it supports partitioning of the table.
But when I try to run a command like
CREATE TABLE sales_range
(salesman_id NUMBER(5),
salesman_name VARCHAR2(30),
sales_amount NUMBER(10),
sales_date DATE)
PARTITION BY RANGE(sales_date)
PARTITION sales_jan2000 VALUES LESS THAN(TO_DATE('02/01/2000','DD/MM/YYYY')),
PARTITION sales_feb2000 VALUES LESS THAN(TO_DATE('03/01/2000','DD/MM/YYYY')),
PARTITION sales_mar2000 VALUES LESS THAN(TO_DATE('04/01/2000','DD/MM/YYYY')),
PARTITION sales_apr2000 VALUES LESS THAN(TO_DATE('05/01/2000','DD/MM/YYYY'))
I get the following error
"ORA-00439: feature not enabled: Partitioning"
Please let me know what is causing the issue/error and how to resolve it.
Thanks.

Where did you read that the express edition supports partitioning? I would strongly suspect that there was an error in the documentation-- partitioning is an extra cost option on top of an enterprise edition database. Perhaps you are confusing the personal edition (which does support partitioning) with the express edition?
Justin

Can not connect Oracle 10g express edition from report builder.

I have newly installed report builder . Different home was selected for Report builder and oracle. Oracle database server is also in the same machine. But i am not able to connect my oracle 10g express edition database. It throws error ORA-12154 : TNS could not resolve service name.( same error displayed while trying to connect from SQL Plus).But from toad i am able to access the database. May be because here I am able to select the proper home.
Here i am adding my tns entry
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 1ECA66A679AB494)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
can any one suggest what the actual problem is?
Thanks ..........

Hello,
Oracle 10g XE is rather specific and, I'm not sure that you can upgrade it to 10.2.0.4 .
However, Oracle published an Upgrade Guide for Oracle Express Edition but, it's limited to *10.2.0.3*:
http://download.oracle.com/docs/cd/B25329_01/doc/server.102/b32391/toc.htm
But be careful:
Once you have upgraded to Oracle Database 10g, you cannot downgrade back to Oracle Database Express Edition.Hope this help.
Best regards,
Jean-Valentin
Edited by: Lubiez Jean-Valentin on May 22, 2010 12:06 AM

Why i can't not create new database in oracle 10g express

why i can't not create new database in oracle 10g express?
should i use oracle 11g standard edition?
thanks

In Oracle a schema is what a 'database' is in Sqlserver.
And if you would have been aware about the limitations of XE, you would have known you can only create *1* (one) database using Oracle XE.
However, probably you don't need a new database at all, and a schema will suffice.
Sybrand Bakker
Senior Oracle DBA

Can not upgrade oracle 10g express edition 10.2.0.1 to 10.2.0.4

I have install oracle 10g express edition 10.2.0.1 for windows 2003
now I want upgrade to 10.2.0.4,I download p6810189(10.2.0.4 patch)
When I upgrade 10.2.0.4 at OUI,have 2 option I don't know how to fill
Specify File Locations
1.Name:
2.Patch:
my oracle was installed at c:\oraclexe
oracle Home:C:\oraclexe\app\oracle\product\10.2.0\server
oracle BASE:C:\oraclexe\
oracle home_name:XE
oracle sid:XE

Hello,
Oracle 10g XE is rather specific and, I'm not sure that you can upgrade it to 10.2.0.4 .
However, Oracle published an Upgrade Guide for Oracle Express Edition but, it's limited to *10.2.0.3*:
http://download.oracle.com/docs/cd/B25329_01/doc/server.102/b32391/toc.htm
But be careful:
Once you have upgraded to Oracle Database 10g, you cannot downgrade back to Oracle Database Express Edition.Hope this help.
Best regards,
Jean-Valentin
Edited by: Lubiez Jean-Valentin on May 22, 2010 12:06 AM

Can not reset password in Oracle 10g Express

I have searched google for 4 hours, now I am certain:
"May be I am the only one in the world who have this problem."
I installed Oracle 10g Express on my Debian5.
I need to reset password for SYS/SYSTEM users
So I checked online tutorial says I need to use a utility called "orapwd" to recreate a password file.
Everything is smooth since now.
When I finally find this "orapwd" utility. I type "orapwd" as a root user. Terminal replies "orapwd command not found".
I then discovered the orapwd is some kind of x-execute file. After an extensive search on google I concluded that this kind of file is inexecutable.
Many tutorials I read online specify that the "orapwd" is actually "orapwd.exe", but on my Debian system it is "orapwd" with no extension.
Any suggestion is welcome.
ps: is there anyway I can reset password without going through "orapwd" s*t.
Best regards to all who have read to the end of this post

Eric wrote:
And Billy, what makes you think Windows Administrators do not know administration on command line?Experience dealing with Windows SAs over a decade and a half.
I got my first part time job as a Windows Administrator in the beginning era of Windows 95 in a small netcafe. The boss does not pay me but like me use workstations there for free.
In the early days, I administrate both Dos and Win3.1. I do my work on command line primarily and wrote a hell lot of *.bat files. In those days it were quite different. Because administration and configuration came from a command line DOS environment. We for example never configured networking for a Windows 3.1 or WFW 3.11 client via a GUI. It was done by directly editing system.ini and protocol.ini and making the correct changes.
And this made the guys and me almost fail our Windows CE certification because the silly multiple question exam asked which buttons to click in the GUI to configure networking and not how it works at actual system configuration level. In other words, it tested your knowledge of the GUI functions and not the actual system config and admin itself.
And then Windows NT was released and command line admin became the exception and not the rule. The All-Config-Eggs-in-a-Single-basket called the Windows Registry exemplified this flawed approach.
But since Window95 I find myself spending less and less time on command line, more and more on GUI and my work efficiency increase tremedously. I can record the mouse clicks, the key presses, then covert then into a script. I can change every setting of the system in just few clicks. In the world of Linux, this is still a dream, isn't it?You are missing the point. There are a large number of admin GUI tools available for Linux. But these seldom serve as crutches to configure the system, because of a i-am-clueless-factor.
If two systems, both are equally capable. To acheive the same thing, system A takes 2 working hours, system B takes 8 working hours. Doesn't this makes system B inferior compare to A?Because of the lack of knowledge and skill of a person to do the required on system B in 10 minutes now takes 8 hours instead? Ignorance of an operating system does not qualify as making system B inferior to system A.
In past decade, Linux became very popular in the server market is not becasue there are an increasing number of Linux system administrators who are good at command line administration but because Linux is becoming more user friendly. And as a result. This increased administrator's work efficiency and the same time reduce training cost which invites more people to learn Linux.Incorrect. There is a reason that 483 of the 500 of the fastest and most powerful computer systems on this planet runs Linux. And only 5 runs Windows.
And this has nothing to do with imagined user friendliness. It has everything to do with technical superiority and total cost of ownership.
So the more idiot proof the system is, the better the system will become.No. The less idiots there are, the better the quality of system administration, the better security, the more robust the systems are.

Oracle 11g Express Edition not working

Hi, I have installed Oracle 11g Express Edition correctly but when I try to log in :
http://127.0.0.1:8080/htmldb
I use SYSTEM and my password and it logs in but says: The requested URL /htmldb was not found on this server
If I try to acced to :
http://127.0.0.1:8080/apex
the problem is that I cannot login either with SYS, SYSTEM, sys or system.
Edit: I have windows 8.1

Try ...:8080/apex/f?p=4950 for the URL with the system credential, that is the apex admin URL, and SYSTEM credential should work for that one.
Most any other Apex URLs require an Apex login, which is not SYS, nor SYSTEM, those are database users, they aren't apex users.
And if you get a "page not found" or similar error, check output of:
lsnrctl status
For Apex to work, both the database and the listener must be running, and there also must be a "...presentation=HTTP... port=8080" line showing up in the ...status output, in Endpoints... section.
If that endpoint isn't there, apex won't work, something may not be quite correct with the network settings in listener.ora done by the installer.

Oracle 11g express edition not connecting

2 days back i installed Oracle 11g express edition. I worked good for a day and now its not getting connected
1)when i try to get started it used to display the Oracle DataBase XE homepage. but now i have the following error message
Firefox can't establish a connection to the server at 127.0.0.1:8080.
2) In SQLPlus when I did
SQL> connect sys/***** as sysdba i am getting the following error
ERROR:
error ORA-03113: end-of-file on communication channel
process-id:0
session-id:0
serial number:0
can somehelp. I am a student and new to oracle

Hi,
My OS is windows XP 32 bitOkay. Did you check the state of the Oracle Services?
I reinstalled the software again and mySQL is working good.mySQL?! Or do you mean, you can connect using sqlplus (the database "command line")?
http://127.0.0.1:8080/apex/f?p=4950The link is correct. Do you have any other service that might use port 8080, e.g. an Apache Tomcat, IIS, or similar?
So, if you can connect using sqlplus (which didn't work in your first post, probably works now after reinstallation), you could open up a command line window and run
lsnrctl statusIf you don't find an entry like the following one, your Database Listener wasn't able to bind to that port. Either you have a (rapid) changing hostname/IP-adress, no active network interface, or a port conflict.
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=yourhostname)(PORT=8080))(Presentation=HTTP)(Session=RAW))
{code]
The output of that command gives you several other information that might help you find resources for debugging, e.g. the location of your *Listener Parameter File* and your *Listener Log File*. You can take a look at these to find out what's going wrong.
-Udo

Oracle 10g Express Service not starting Database

I have a fresh download and install or Oracle 10gExpress and am having issues when I manually start the OracleXE service. The OracleXE Service starts, but the database does not. The error I see is ora-12560.
The database and service stops correctly if I manually stopthe OracleXE service. The start of the service just won't start the database.
The oradim.log contains
Thu Oct 15 11:51:30 2009
C:\oraclexe\app\oracle\product\10.2.0\server\bin\oradim.exe -startup -sid xe -usrpwd * -log oradim.log -nocheck 0
Thu Oct 15 11:51:31 2009
ORA-12560: TNS:protocol adapter error
New Information:
What I just found out was that it all works fine if the install of Oracle 10g Express is done prior to joining the Server to a domain. If the install is done after the server is part of a domain, the service will not start the database. If the install is done prior to putting the Server in a domain, the service will start the database.
Any help why this must be installed prior to adding the server to the domain?
Edited by: user10279386 on Oct 15, 2009 9:24 AM

Hi!
I think that installation must be done with Domain user who is Administrator on this machine also. Check ORA_DBA group that consist of at least two users: SYSTEM (who by default brings up the service, but you can change it) and your domain user (local Administrator on that server) who is making installation of XE on that server.
Hope this helps,
Damir

Installed Oracle database express edition but not can't access c: drive

I downloaded and installed oracle 10g express edition (universal) on my windows 7 64bit computer and went through the set up but I changed the default installed path to just c: drive (thinking it would create a folder by itself). After finishing the installation, my c: drive shows zero gb. When I try to open my c: drive I get a message saying "c:\ is not accessible. Access denied." All my files are there as i used folder shortcuts to access them. I tried uninstalling oracle but hit an error saying:
"This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is valid Windows installer package."
I can't install any programs or save/copy to any folder in my c: drive but I can save/copy to desktop.
Please help by any means, thanks.
Edited by: 796973 on Sep 23, 2010 9:19 PM

796973 wrote:
Please help by any means, thanks.
This happens when you don't follow the installation guide and think you are smarter then the software.
When the installer warned you that the installation path you were choosing was not empty and asked you if you wanted to install anyway...You answered YES!
Now you lost you drive c: file system.
Tough luck!
:p

Oracle Database Express Edition 11g Database home Page is not Displaying

As I am Java Developer and wanted to do JDBC connection for Java.....
So I Have Installed Oracle Database Express Edition 11g......
But the home page on url...http://127.0.0.1:8080/apex/f?p=4950
is Not Working.....
I am Using Windows Xp....SP 3.....
Help Me for this....
Thanks & In Advance.....
Jugal Thakkar

972423 wrote:
As I am Java Developer and wanted to do JDBC connection for Java.....For Java, JDBC and JDeveloper related discussions, you'll find plenty of forums:
https://forums.oracle.com/forums/category.jspa?categoryID=285
https://forums.oracle.com/forums/category.jspa?categoryID=500
So I Have Installed Oracle Database Express Edition 11g......
But the home page on url...http://127.0.0.1:8080/apex/f?p=4950
is Not Working.....Just installed? Never worked before? Unreachable 'Get Started' page usually indicates that install was not completely successful, database creation failed because of OS misconfiguration.
Before even trying that url you should see a endpoint with port 8080 in Endpoints summary from lsnrctl stat command.
Use search and have a look through previous threads for this FAQ.
E.g. https://forums.oracle.com/forums/search.jspa?threadID=&q=%2Bpage+%2B4950&objID=f251&dateRange=thisyear&userID=&numResults=15&rankBy=10001

Oracle Express : Express not switching to EDT

Similar Messages

Maybe you are looking for