Oracle Express Remote Installation - Error 1628
Hi
I'm currently getting error 1628 during the installation of Oracle Express on a machines with Windows XP SP2.
The installation of Oracle Express is being performed silently using a patch management/software distribution tool such as BigFix. The installation of this product is initiated when a non-admin user accepts an action from the patch management server to install Oracle Express. When the action is accepted OracleXEUniv.exe installer executes as the LOCAL SYSTEM account and NOT the logged in user. Again this user is a domain user but does not have local admin privileges. While this approach does NOT work for a non-admin user, it does work for a user with local admin privileges.
On a related note ... I was able to test the installation of OracleExpress using the patch management server while no one was logged into the machine. The installation ran as the LOCAL SYSTEM account and was successful.
Can someone explain what level of privileges is required by the Oracle Express installer, why would Oracle Express fail to install while logged in as a non-admin user if the installation process shows that OracleXEUniv.exe is being executed as the LOCAL SYSTEM (reported through theTask Manager)
Thank you in advanced.
Jose
Hi,
Thanks for the link; it was helpful. However, I'm curios to know why would the installation complete with the LOCAL SYSTEM account when I'm logged off the machine but not when I'm logged in as a non-admin user while the job is running in the background as the LOCAL SYSTEM (LOCAL SYSTEM part of the Local Admin group). Again this process is being initiated by a software distribution tool not by a user or administrator. This is how I'm able to define the run as user.
Originally when I logged into the machine as a non-admin user the job would fail with error 1628 even though it is executed as the LOCAL SYSTEM user. However, when I'm logged off the machine (Windows Login Prompt visible at the screen) the installation completes successfully.
I just wonder How and When does the Windows Installer know what user is being used for the installation of Oracle Express?
Thank you in advanced.
Similar Messages
-
Oracle 10g Express Edition Installation Error
I have downloaded 10g Express Edition and am trying to install. After clicking on the OracleXE.exe file, I get the following error:
Error applying transforms. Verify that the specified transform paths are valid. C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST
I have verified that the path and file exists. What else should I do?Here is the Ipconfig settings:
ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : jfunk
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : Yes
Ethernet adapter Local Area Connection 11:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Loopback Adapter
Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.100.100
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection 5:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : 3Com 3C920 Integrated Fast Ethernet
Controller (3C905C-TX Compatible) #4
Physical Address. . . . . . . . . : 00-08-74-48-AE-AB
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.5
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
DNS Servers . . . . . . . . . . . : 200.105.128.40
200.105.128.41
C:\Documents and Settings\funk>
No luck in changing the Temp environment setting. Here is the latest log.
=== Verbose logging started: 8/22/2007 16:55:24 Build type: SHIP UNICODE 3.01.4000.4039 Calling process: c:\PROGRA~1\COMMON~1\INSTAL~1\Driver\11\INTEL3~1\IDriver.exe ===
MSI (c) (10:B8) [16:55:24:765]: SOFTWARE RESTRICTION POLICY: Verifying package --> 'c:\temp\_is5F\Oracle Database 10g Express Edition.msi' against software restriction policy
MSI (c) (10:B8) [16:55:24:765]: Note: 1: 2262 2: DigitalSignature 3: -2147287038
MSI (c) (10:B8) [16:55:24:765]: SOFTWARE RESTRICTION POLICY: c:\temp\_is5F\Oracle Database 10g Express Edition.msi is not digitally signed
MSI (c) (10:B8) [16:55:24:765]: SOFTWARE RESTRICTION POLICY: c:\temp\_is5F\Oracle Database 10g Express Edition.msi is permitted to run at the 'unrestricted' authorization level.
MSI (c) (10:B8) [16:55:24:775]: Cloaking enabled.
MSI (c) (10:B8) [16:55:24:775]: Attempting to enable all disabled priveleges before calling Install on Server
MSI (c) (10:B8) [16:55:24:775]: End dialog not enabled
MSI (c) (10:B8) [16:55:24:775]: Original package ==>
MSI (c) (10:B8) [16:55:24:775]: Package we're running from ==> c:\temp\_is5F\Oracle Database 10g Express Edition.msi
MSI (c) (10:B8) [16:55:24:775]: Transforming table Property.
MSI (c) (10:B8) [16:55:24:775]: APPCOMPAT: looking for appcompat database entry with ProductCode '{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}'.
MSI (c) (10:B8) [16:55:24:775]: APPCOMPAT: no matching ProductCode found in database.
MSI (c) (10:B8) [16:55:24:775]: MSCOREE not loaded loading copy from system32
MSI (c) (10:B8) [16:55:24:785]: Looking for file transform: C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST
MSI (c) (10:B8) [16:55:24:785]: Unable to create a temp copy of transform 'C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST'.
MSI (c) (10:B8) [16:55:24:785]: Note: 1: 2203 2: C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST 3: -2147287037
MSI (c) (10:B8) [16:55:24:785]: Couldn't find cached transform C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST. Looking for it at the source.
MSI (c) (10:B8) [16:55:24:785]: Resolving source.
MSI (c) (10:B8) [16:55:24:785]: Resolving source to launched-from source.
MSI (c) (10:B8) [16:55:24:785]: Setting launched-from source as last-used.
MSI (c) (10:B8) [16:55:24:785]: SOURCEDIR ==> c:\temp\_is5F\
MSI (c) (10:B8) [16:55:24:785]: SOURCEDIR product ==> {F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}
MSI (c) (10:B8) [16:55:24:785]: Looking for file transform: C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST
MSI (c) (10:B8) [16:55:24:785]: Unable to create a temp copy of transform 'C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST'.
MSI (c) (10:B8) [16:55:24:785]: Note: 1: 2203 2: C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST 3: -2147287037
MSI (c) (10:B8) [16:55:24:785]: Couldn't find cached transform C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST. Looking for it at the source.
MSI (c) (10:B8) [16:55:24:785]: Looking for file transform: c:\temp\_is5F\1033.MST
MSI (c) (10:B8) [16:55:24:795]: Original transform ==> c:\temp\_is5F\1033.MST
MSI (c) (10:B8) [16:55:24:795]: Transform we're running from ==> C:\temp\5d536d5.mst
MSI (c) (10:B8) [16:55:24:795]: Found missing cached transform c:\temp\_is5F\1033.MST. Adding it to re-cache list.
MSI (c) (10:B8) [16:55:24:795]: SOFTWARE RESTRICTION POLICY: Verifying transform --> 'c:\temp\_is5F\1033.MST' against software restriction policy
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: DigitalSignature 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: SOFTWARE RESTRICTION POLICY: c:\temp\_is5F\1033.MST is not digitally signed
MSI (c) (10:B8) [16:55:24:795]: SOFTWARE RESTRICTION POLICY: c:\temp\_is5F\1033.MST is permitted to run at the 'unrestricted' authorization level.
MSI (c) (10:B8) [16:55:24:795]: Validating transform 'C:\temp\5d536d5.mst' with validation bits 0
MSI (c) (10:B8) [16:55:24:795]: Transform 'C:\temp\5d536d5.mst' is valid.
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: Patch 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: PatchPackage 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: _Tables 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: _Columns 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: Media 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: File 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: PatchPackage 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: Patch 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: TRANSFORM: 'PatchPackage' table is missing or empty. No pre-transform fixup necessary.
MSI (c) (10:B8) [16:55:24:795]: TRANSFORM: Applying regular transform to database.
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: _Tables 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: _Columns 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: ActionText 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: AdminExecuteSequence 3: -2147287038
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2262 2: Condition 3: -2147287038
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2262 2: AdminUISequence 3: -2147287038
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2262 2: AdvtExecuteSequence 3: -2147287038
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2262 2: AdvtUISequence 3: -2147287038
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2262 2: AppId 3: -2147287038
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2262 2: AppSearch 3: -2147287038
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2251 2: c:\temp\_is5F\Oracle Database 10g Express Edition.msi 3: Property
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2729
DEBUG: Error 2251: Database: c:\temp\_is5F\Oracle Database 10g Express Edition.msi Transform: Cannot delete row that doesn't exist. Table: Property
1: 2251 2: c:\temp\_is5F\Oracle Database 10g Express Edition.msi 3: Property
Error applying transforms. Verify that the specified transform paths are valid.
c:\temp\_is5F\1033.MST
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 1708
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2729
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2729
MSI (c) (10:B8) [16:55:24:805]: Product: Oracle Database 10g Express Edition -- Installation failed.
MSI (c) (10:B8) [16:55:24:805]: Attempting to delete file C:\temp\5d536d5.mst
MSI (c) (10:B8) [16:55:24:805]: Unable to delete the file. LastError = 32
=== Verbose logging stopped: 8/22/2007 16:55:24 ===
I am on my last attempt here if there are no other concrete solutions. Guess I will have to wait for 11g to make it to the Windows environment. Any other previous version of 10g that I can try???? -
Oracle Apps R12 Installation error on windows
This new discussion is related to below link as last times discussion is locked ,i dont have idea why that discussion is locked(might be due to attachment link that i provided for log file )
"R12 E-Business suite installation error on Windows XP-SP3"
I have added 4 GB RAM and started installation on new fresh windows XP SP3 system with only one C: drive with 300 GB space(including staging area)
below is the log file for error
Oracle Applications Rapid Install Wizard Install log
>> Using Rapid Wizard Version : 12.1.1.9
>> Install session started : Sun Jan 12 14:57:39 IST 2014
>> Rapid Wizard source location : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz
>> Command Line arguments for this run :
=================================================================
Install Session Information
Host Name : utkarsh.sparsh
Host Operating System : Windows (32-bit)
User running Install : Uday Gite
=================================================================
InstUpgPanel
User action : Install Oracle Applications
Install type : Standard Install
Disabling OCM Configuration
InstallPanel
User action : Create configuration
Description : Creates a new instance configuration.
PortPanel
Selected port pool:
Database Port : 1521
RPC Port : 1626
Web SSL Port : 4443
ONS Local Port : 6100
ONS Remote Port : 6200
ONS Request Port : 6500
Web Listener Port : 8000
Active Web Port : 8000
Forms Port : 9000
Metrics Server Data Port : 9100
Metrics Server Request Port : 9200
JTF Fulfillment Server Port : 9300
MSCA Server Port : 10200-10205
MCSA Telnet Server Port : 10200,10202,10204
MSCA Dispatcher Port : 10800
Java Object Cache Port : 12345
OC4J JMS Port Range for Oacore : 23000-23004
OC4J JMS Port Range for Forms : 23500-23504
OC4J JMS Port Range for Home : 24000-24004
OC4J JMS Port Range for Oafm : 24500-24504
OC4J AJP Port Range for Oacore : 21500-21504
OC4J AJP Port Range for Forms : 22000-22004
OC4J AJP Port Range for Home : 22500-22504
OC4J AJP Port Range for Oafm : 25000-25004
OC4J RMI Port Range for Oacore : 20000-20004
OC4J RMI Port Range for Forms : 20500-20504
OC4J RMI Port Range for Home : 21000-21004
OC4J RMI Port Range for Oafm : 25500-25504
DB ONS Local Port : 6300
DB ONS Remote Port : 6400
Oracle Connection Manager Port : 1521
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
DBNodePanel
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
AppsNodePanel
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
AppsNodePanel
AllNodesPanel
Service Name: utkarsh
Node Name: _utkarsh
Operating System: _Windows (32-bit)
Service Name: utkarsh
Node Name: _utkarsh
Operating System: _Windows (32-bit)
Writing configuration file to: C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\conf_FPRD1.txt
Adding ports for Server0_utkarsh
Setting port s_db_ons_localport to 6300
Setting port s_db_ons_remoteport to 6400
Setting port s_cmanport to 1521
Adding ports for Server1_utkarsh
Setting port s_rpcport to 1626
Setting port s_webssl_port to 4443
Setting port s_ons_localport to 6100
Setting port s_ons_remoteport to 6200
Setting port s_ons_requestport to 6500
Setting port s_webport to 8000
Setting port s_active_webport to 8000
Setting port s_formsport to 9000
Setting port s_metdataport to 9100
Setting port s_metreqport to 9200
Setting port s_jtfuf_port to 9300
Setting port s_mwaPortNo to 10200-10205
Setting port s_mwaTelnetPortNo to 10200,10202,10204
Setting port s_mwaDispatcherPort to 10800
Setting port s_java_object_cache_port to 12345
Setting port s_oacore_jms_portrange to 23000-23004
Setting port s_forms_jms_portrange to 23500-23504
Setting port s_home_jms_portrange to 24000-24004
Setting port s_oafm_jms_portrange to 24500-24504
Setting port s_oacore_ajp_portrange to 21500-21504
Setting port s_forms_ajp_portrange to 22000-22004
Setting port s_home_ajp_portrange to 22500-22504
Setting port s_oafm_ajp_portrange to 25000-25004
Setting port s_oacore_rmi_portrange to 20000-20004
Setting port s_forms_rmi_portrange to 20500-20504
Setting port s_home_rmi_portrange to 21000-21004
Setting port s_oafm_rmi_portrange to 25500-25504
Writing configuration file to: C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\conf_FPRD1.txt
Adding ports for Server0_utkarsh
Setting port s_db_ons_localport to 6300
Setting port s_db_ons_remoteport to 6400
Setting port s_cmanport to 1521
Adding ports for Server1_utkarsh
Setting port s_rpcport to 1626
Setting port s_webssl_port to 4443
Setting port s_ons_localport to 6100
Setting port s_ons_remoteport to 6200
Setting port s_ons_requestport to 6500
Setting port s_webport to 8000
Setting port s_active_webport to 8000
Setting port s_formsport to 9000
Setting port s_metdataport to 9100
Setting port s_metreqport to 9200
Setting port s_jtfuf_port to 9300
Setting port s_mwaPortNo to 10200-10205
Setting port s_mwaTelnetPortNo to 10200,10202,10204
Setting port s_mwaDispatcherPort to 10800
Setting port s_java_object_cache_port to 12345
Setting port s_oacore_jms_portrange to 23000-23004
Setting port s_forms_jms_portrange to 23500-23504
Setting port s_home_jms_portrange to 24000-24004
Setting port s_oafm_jms_portrange to 24500-24504
Setting port s_oacore_ajp_portrange to 21500-21504
Setting port s_forms_ajp_portrange to 22000-22004
Setting port s_home_ajp_portrange to 22500-22504
Setting port s_oafm_ajp_portrange to 25000-25004
Setting port s_oacore_rmi_portrange to 20000-20004
Setting port s_forms_rmi_portrange to 20500-20504
Setting port s_home_rmi_portrange to 21000-21004
Setting port s_oafm_rmi_portrange to 25500-25504
Setting temp directory to: C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
Port Availability Check :
-- database node ports --
Database Port available: Port Value = 1521
Database Port Value = 1521...... Available
DB ONS Local Port available: Port Value = 6300
DB ONS Local Port Value = 6300...... Available
DB ONS Remote Port available: Port Value = 6400
DB ONS Remote Port Value = 6400...... Available
-- apps node ports --
RPC Port available: Port Value = 1626
RPC Port Value = 1626...... Available
Web SSL Port available: Port Value = 4443
Web SSL Port Value = 4443...... Available
ONS Local Port available: Port Value = 6100
ONS Local Port Value = 6100...... Available
ONS Remote Port available: Port Value = 6200
ONS Remote Port Value = 6200...... Available
ONS Request Port available: Port Value = 6500
ONS Request Port Value = 6500...... Available
Web Listener Port available: Port Value = 8000
Web Listener Port Value = 8000...... Available
Forms Port available: Port Value = 9000
Forms Port Value = 9000...... Available
Metrics Server Data Port available: Port Value = 9100
Metrics Server Data Port Value = 9100...... Available
Metrics Server Request Port available: Port Value = 9200
Metrics Server Request Port Value = 9200...... Available
JTF Fulfillment Server Port available: Port Value = 9300
JTF Fulfillment Server Port Value = 9300...... Available
MSCA Server Port available: Port Value = 10200
MSCA Server Port available: Port Value = 10201
MSCA Server Port available: Port Value = 10202
MSCA Server Port available: Port Value = 10203
MSCA Server Port available: Port Value = 10204
MSCA Server Port available: Port Value = 10205
MSCA Server Port Value = 10200-10205...... Available
MSCA Dispatcher Port available: Port Value = 10800
MSCA Dispatcher Port Value = 10800...... Available
Java Object Cache Port available: Port Value = 12345
Java Object Cache Port Value = 12345...... Available
OC4J JMS Port Range for Oacore available: Port Value = 23000
OC4J JMS Port Range for Oacore available: Port Value = 23001
OC4J JMS Port Range for Oacore available: Port Value = 23002
OC4J JMS Port Range for Oacore available: Port Value = 23003
OC4J JMS Port Range for Oacore available: Port Value = 23004
OC4J JMS Port Range for Oacore Value = 23000-23004...... Available
OC4J JMS Port Range for Forms available: Port Value = 23500
OC4J JMS Port Range for Forms available: Port Value = 23501
OC4J JMS Port Range for Forms available: Port Value = 23502
OC4J JMS Port Range for Forms available: Port Value = 23503
OC4J JMS Port Range for Forms available: Port Value = 23504
OC4J JMS Port Range for Forms Value = 23500-23504...... Available
OC4J JMS Port Range for Home available: Port Value = 24000
OC4J JMS Port Range for Home available: Port Value = 24001
OC4J JMS Port Range for Home available: Port Value = 24002
OC4J JMS Port Range for Home available: Port Value = 24003
OC4J JMS Port Range for Home available: Port Value = 24004
OC4J JMS Port Range for Home Value = 24000-24004...... Available
OC4J JMS Port Range for Oafm available: Port Value = 24500
OC4J JMS Port Range for Oafm available: Port Value = 24501
OC4J JMS Port Range for Oafm available: Port Value = 24502
OC4J JMS Port Range for Oafm available: Port Value = 24503
OC4J JMS Port Range for Oafm available: Port Value = 24504
OC4J JMS Port Range for Oafm Value = 24500-24504...... Available
OC4J AJP Port Range for Oacore available: Port Value = 21500
OC4J AJP Port Range for Oacore available: Port Value = 21501
OC4J AJP Port Range for Oacore available: Port Value = 21502
OC4J AJP Port Range for Oacore available: Port Value = 21503
OC4J AJP Port Range for Oacore available: Port Value = 21504
OC4J AJP Port Range for Oacore Value = 21500-21504...... Available
OC4J AJP Port Range for Forms available: Port Value = 22000
OC4J AJP Port Range for Forms available: Port Value = 22001
OC4J AJP Port Range for Forms available: Port Value = 22002
OC4J AJP Port Range for Forms available: Port Value = 22003
OC4J AJP Port Range for Forms available: Port Value = 22004
OC4J AJP Port Range for Forms Value = 22000-22004...... Available
OC4J AJP Port Range for Home available: Port Value = 22500
OC4J AJP Port Range for Home available: Port Value = 22501
OC4J AJP Port Range for Home available: Port Value = 22502
OC4J AJP Port Range for Home available: Port Value = 22503
OC4J AJP Port Range for Home available: Port Value = 22504
OC4J AJP Port Range for Home Value = 22500-22504...... Available
OC4J AJP Port Range for Oafm available: Port Value = 25000
OC4J AJP Port Range for Oafm available: Port Value = 25001
OC4J AJP Port Range for Oafm available: Port Value = 25002
OC4J AJP Port Range for Oafm available: Port Value = 25003
OC4J AJP Port Range for Oafm available: Port Value = 25004
OC4J AJP Port Range for Oafm Value = 25000-25004...... Available
OC4J RMI Port Range for Oacore available: Port Value = 20000
OC4J RMI Port Range for Oacore available: Port Value = 20001
OC4J RMI Port Range for Oacore available: Port Value = 20002
OC4J RMI Port Range for Oacore available: Port Value = 20003
OC4J RMI Port Range for Oacore available: Port Value = 20004
OC4J RMI Port Range for Oacore Value = 20000-20004...... Available
OC4J RMI Port Range for Forms available: Port Value = 20500
OC4J RMI Port Range for Forms available: Port Value = 20501
OC4J RMI Port Range for Forms available: Port Value = 20502
OC4J RMI Port Range for Forms available: Port Value = 20503
OC4J RMI Port Range for Forms available: Port Value = 20504
OC4J RMI Port Range for Forms Value = 20500-20504...... Available
OC4J RMI Port Range for Home available: Port Value = 21000
OC4J RMI Port Range for Home available: Port Value = 21001
OC4J RMI Port Range for Home available: Port Value = 21002
OC4J RMI Port Range for Home available: Port Value = 21003
OC4J RMI Port Range for Home available: Port Value = 21004
OC4J RMI Port Range for Home Value = 21000-21004...... Available
OC4J RMI Port Range for Oafm available: Port Value = 25500
OC4J RMI Port Range for Oafm available: Port Value = 25501
OC4J RMI Port Range for Oafm available: Port Value = 25502
OC4J RMI Port Range for Oafm available: Port Value = 25503
OC4J RMI Port Range for Oafm available: Port Value = 25504
OC4J RMI Port Range for Oafm Value = 25500-25504...... Available
OS User and Group Check
Domain=UTKARSH
,Username=Uday Gite
,PC-Name=UTKARSH
User belongs to the Administrators Group.
Port Uniqueness Check :
-- database node ports --
-- apps node ports --
All ports are unique.
File System Check :
-- database node mount point --
Database ORACLE_HOME created:
Mount Point = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0
Database ORACLE_HOME admin folder created:
Mount Point = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil
Database ORACLE_HOME temp folder created:
Mount Point = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\temp
Database Install Log Directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\log\FPRD1_utkarsh
Database Install Out Directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\out\FPRD1_utkarsh\templbac
Database Install Out Directory available:
Mount Point = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\out\FPRD1_utkarsh\templbac
OCM configuration target directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\clone\\
Database System File Directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\db\apps_st\data
Database Log File Directory available:
Mount Point = C:\OracleApps\oracle\FPRD1\db\apps_st\data
Database Transaction File Directory available:
Mount Point = C:\OracleApps\oracle\FPRD1\db\apps_st\data
Database Archive File Directory available:
Mount Point = C:\OracleApps\oracle\FPRD1\db\apps_st\data
Database OraInventory File Directory created:
Mount Point = c:\temp
-- apps node mount point --
APPL_TOP created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
APPL_TOP admin created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl\admin
APPL_TOP mount 2 available:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
APPL_TOP mount 3 available:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
APPL_TOP mount 4 available:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
COMMON_TOP created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\apps_st\comn
JAVA_TOP created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\apps_st\comn\java\classes
Temp Directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\temp
APPL_TOP admin Install Log Directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\admin\log
Apps ORACLE_HOME created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\tech_st\10.1.3
Tools ORACLE_HOME created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\tech_st\10.1.2
OCM configuration target directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\tech_st\10.1.3\appsutil\clone\\
OCM configuration target directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\tech_st\10.1.2\appsutil\clone\\
Apps ORACLE_HOME OraInventory File Directory available:
Mount Point = c:\temp
Tools ORACLE_HOME OraInventory File Directory available:
Mount Point = c:\temp
Writing configuration file to: C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\conf_FPRD1.txt
Adding ports for Server0_utkarsh
Setting port s_db_ons_localport to 6300
Setting port s_db_ons_remoteport to 6400
Setting port s_cmanport to 1521
Adding ports for Server1_utkarsh
Setting port s_rpcport to 1626
Setting port s_webssl_port to 4443
Setting port s_ons_localport to 6100
Setting port s_ons_remoteport to 6200
Setting port s_ons_requestport to 6500
Setting port s_webport to 8000
Setting port s_active_webport to 8000
Setting port s_formsport to 9000
Setting port s_metdataport to 9100
Setting port s_metreqport to 9200
Setting port s_jtfuf_port to 9300
Setting port s_mwaPortNo to 10200-10205
Setting port s_mwaTelnetPortNo to 10200,10202,10204
Setting port s_mwaDispatcherPort to 10800
Setting port s_java_object_cache_port to 12345
Setting port s_oacore_jms_portrange to 23000-23004
Setting port s_forms_jms_portrange to 23500-23504
Setting port s_home_jms_portrange to 24000-24004
Setting port s_oafm_jms_portrange to 24500-24504
Setting port s_oacore_ajp_portrange to 21500-21504
Setting port s_forms_ajp_portrange to 22000-22004
Setting port s_home_ajp_portrange to 22500-22504
Setting port s_oafm_ajp_portrange to 25000-25004
Setting port s_oacore_rmi_portrange to 20000-20004
Setting port s_forms_rmi_portrange to 20500-20504
Setting port s_home_rmi_portrange to 21000-21004
Setting port s_oafm_rmi_portrange to 25500-25504
File Space Check :
-- database node space checks --
Disk space on system acceptable:
Database ORACLE_HOME = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0
required = 5600.0
actual = 249592.6953125
Disk space on system acceptable:
Database System File Directory = C:\OracleApps\oracle\FPRD1\db\apps_st\data
required = 20200.0
actual = 243992.6953125
Disk space on system acceptable:
Database Log File Directory = C:\OracleApps\oracle\FPRD1\db\apps_st\data
required = 950.0
actual = 223792.6953125
Disk space on system acceptable:
Database Transaction File Directory = C:\OracleApps\oracle\FPRD1\db\apps_st\data
required = 103350.0
actual = 222842.6953125
Disk space on system acceptable:
Database Archive File Directory = C:\OracleApps\oracle\FPRD1\db\apps_st\data
required = 64500.0
actual = 119492.6953125
-- apps node space checks --
Disk space on system acceptable:
APPL_TOP = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
required = 5800.0
actual = 54992.6953125
Disk space on system acceptable:
APPL_TOP mount 2 = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
required = 2800.0
actual = 49192.6953125
Disk space on system acceptable:
APPL_TOP mount 3 = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
required = 8400.0
actual = 46392.6953125
Disk space on system acceptable:
APPL_TOP mount 4 = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
required = 3100.0
actual = 37992.6953125
Disk space on system acceptable:
COMMON_TOP = C:\OracleApps\oracle\FPRD1\apps\apps_st\comn
required = 3200.0
actual = 34892.6953125
Disk space on system acceptable:
Apps ORACLE_HOME = C:\OracleApps\oracle\FPRD1\apps\tech_st\10.1.3
required = 1400.0
actual = 31692.6953125
Disk space on system acceptable:
Tools ORACLE_HOME = C:\OracleApps\oracle\FPRD1\apps\tech_st\10.1.2
required = 1400.0
actual = 30292.6953125
Disk space on system acceptable:
Temp Directory = C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\temp
required = 1024.0
actual = 28892.6953125
Host/Domain
command: ping -n 1 utkarsh
Pinging utkarsh.sparsh [10.10.12.6] with 32 bytes of data:
Reply from 10.10.12.6: bytes=32 time<1ms TTL=128
Ping statistics for 10.10.12.6:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host ping has succeeded
command: ping -n 1 utkarsh.sparsh
Pinging utkarsh.sparsh [10.10.12.6] with 32 bytes of data:
Reply from 10.10.12.6: bytes=32 time<1ms TTL=128
Ping statistics for 10.10.12.6:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host.domain ping has succeeded
System Utilities
command: cmd.exe /c C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\bin\adchkutl.cmd C:\OracleApps\Cygwin\bin C:\OracleApps\VIS2008\VC\bin
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>echo off
/cygdrive/c/WINDOWS/system32/cmd
'which' command is available.
/usr/bin/gnumake
'gnumake' is available.
/cygdrive/c/WINDOWS/system32/cl
'cc' is available.
/usr/bin/link
'link' is available.
ERRORCODE = 0 ERRORCODE_ENDThe system cannot find the path specified.
System Utilities Availability test has succeeded
AllNodesPanel
Service Name: utkarsh
Node Name: _utkarsh
Operating System: _Windows (32-bit)
Service Name: utkarsh
Node Name: _utkarsh
Operating System: _Windows (32-bit)
DoInstallPanel - Summary Text
The Rapid Install Wizard will now install the following:
DoInstallPanel - User continued install at warning dialog.
Starting from Rapid Install Full Stage area C:\OracleApps\stageR12\oraDB\Disk1
Exception thrown in getAllProductIDs. 0
RapidWiz location: C:\OracleApps\stageR12\startCD\Disk1\rapidwiz
Install Media location: C:\OracleApps\stageR12\startCD\Disk1
Database ORACLE_HOME: C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0
Database SID: FPRD1
Database Context Name : FPRD1_utkarsh
Creating DB Context: C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\FPRD1_utkarsh.xml
dest : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\FPRD1_utkarsh.xml
dest : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\restart.xml
dest : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\restart.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\restart.xml
dest : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\restart.xml
Exception thrown in getAllProductIDs. 0
RapidWiz location: C:\OracleApps\stageR12\startCD\Disk1\rapidwiz
Install Media location: C:\OracleApps\stageR12\startCD\Disk1
APPL_TOP location: C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
Database SID: FPRD1
APPL_TOP Context Name : FPRD1_utkarsh
INST_TOP location: C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh
Creating Apps Context: C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\appl\admin\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\appl\admin\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\appl\admin\FPRD1_utkarsh.xml
dest : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\appl\admin\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\appl\admin\FPRD1_utkarsh.xml
dest : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\appl\admin\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\temp\restart.xml
dest : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\temp\restart.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\temp\restart.xml
dest : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\temp\restart.xml
Processing DriverFile = C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adridb.drv
Processing DriverFile = C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adriapps.drv
Running Instantiation Drivers for C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adriapps.drv
Total number of processes in Current Install 5
Processing DriverFile = C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adridb.drv
Creation of Directory - C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\FPRD1_utkarsh Succeeded.
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adrun11g.cmd
dest : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\FPRD1_utkarsh\adrun11g.cmd
backup : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\FPRD1_utkarsh\adrun11g.cmd to C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\out\FPRD1_utkarsh\templbac\adrun11g.cmd
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adrundb.cmd
dest : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\FPRD1_utkarsh\adrundb.cmd
backup : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\FPRD1_utkarsh\adrundb.cmd to C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\out\FPRD1_utkarsh\templbac\adrundb.cmd
Step 0 of 5
Command: C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\FPRD1_utkarsh\adrun11g.cmd
Processing Step 1 of 5
Executing: C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\FPRD1_utkarsh\adrun11g.cmd
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM $Header: adrun11g.cmd 120.11 2009/03/11 21:22:03 marderiu noship $
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM ###############################################################
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM overwritten. If you were instructed to edit this file, or if you are not
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM able to use the settings created by AutoConfig, refer to Metalink Note
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM 387859.1 for assistance.
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM ###############################################################
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>(set date=Sun 01/12/2014 )
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>(set time=03:05 PM )
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : 11g RDBMS : Sun 01/12/2014 03:05 PM
STARTED INSTALL PHASE : 11g RDBMS : Sun 01/12/2014 03:05 PM
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>SET JRE_PATH=C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>SET JRE_CP=.;C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\jlib\java;C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;C:\OracleApps\stageR12\startCD\Disk1\ra"R12 E-Business suite installation error on Windows XP-SP3"
Your OS is not supported.
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server (32-bit) (Doc ID 761567.1)
Log file located at C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\log\FPRD1_utkarsh\ApplyDatabase_01121856.log
Any details about the error in this log file?
Please review log files mentioned in (How to locate the log files and troubleshoot Rapid Install for Release 12.0.x and 12.1.x (Doc ID 452120.1)) and upload them in one zip file to any free hosting website and post the link here. Please do NOT copy/paste the contents of the log files in this thread.
Thanks,
Hussein -
Oracle R Enterprise installation ERROR: cannot copy dll file
This is bit strange, I posted this message in 2 forums but surprisingly can't find it anymore!! Anyways, I would appreciate if anyone can help me a bit on this issue:
I am having trouble installing ORE 1.3 on my windows 7 (home premium, personal notebook) 64 bit. I strictly followed the installation note and made sure all the path variables are defined properly. My R version is 2.15.1. My Windows user is a member of ora_dba group as can be seen below.
C:\Users\sourabh>net localgroup ora_dba
Alias name ora_dba
Comment Oracle DBA Group
Members
NT AUTHORITY\SYSTEM
sourabh
The command completed successfully.Now when I try to install.bat (bare with me as I try to include the whole path as I believe there may be the problem. Note that my oracle and R installation is in H:\ drive, not in C:\. Can that be an issue about some windows permission? I off-course tried many ways, gave the user full permission, but no luck.)
C:Users\sourabh>H:\ORACLE\OracleREnterprise\ORE\ore-server-win-x86_64-1.3\server\install.bat
Oracle R Enterprise 1.3 Server Installation.
Copyright (c) 2013, Oracle and/or its affiliates. All rights reserved.
Checking R ...................................
Pass
Checking R libraries ........................
Pass
Checking ORACLE_HOME ...............
Pass
Checking ORACLE_SID ..................
Pass
Checking sqlplus ...........................
Pass
Checking ORE ..............................
Pass
Current configuration
R_HOME = H:\ORACLE\OracleREnterprise\R\R-2.15.1
R_LIBS_USER = H:\ORACLE\Oracle11g\product\11.2.0\dbhome\R\library
ORACLE_HOME = H:\ORACLE\Oracle11g\product\11.2.0\dbhome
ORACLE_SID = SINHA
Do you wish to install ORE? [yes]
Choosomg RQSIS tablespace
PERMANENT tablespace to use for RQSYS [SYSAUX]:
Using default SYSAUX
TEMPORARY tablespace to use for RQSYS [TEMP]:
Using default TEMP
Tablespace summary
PERMANENT tablespace = SYSAUX
TEMPORARY tablespace = TEMP
Installing libraries ..............
Fail
ERROR: cannot copy "rqe.dll" to "H:\ORACLE\Oracle11g\product\11.2.0\dbhome\bin"
C:Users\sourabh>Now here is the default group/user and permissions structures for C:\ and H:\ installation directories on my computer:
C:\program files :
Group or user names Permissions
CREATOR OWNER Special Permissions
SYSTEM FULL control
Administrators (Win7\administrators) FULL control
Users (Win7\Users) Read & execute, List folder contents, Read
TrustedInstaller List folder contents, Special Permissions
H:\%ORACLE_HOME% :
Group or user names Permissions
Authenticated Users Special Permissions
SYSTEM FULL control
Administrators (Win7\administrators) FULL control Now noticed that there is no user called sourabh (Win7\Users) or Users (Win7\Users) on H:\, so I created and gave them "Full control" permission before running install script, but still no luck.... Any help please?
Thanks,
SourabhHi all,
I have finally solved the problem, it seems somehow on my windows home premium I can't run the install script (on H:\ ) from the command line. I manually ran the batch script by double clicking on it, it ran fine and I was finally able to install ORE (server + supported + client) on my laptop. Now the connection -- followed through the manual, created user and granted all the roles. Now that I want to test the connection, I open R console and below are the input and output error message though it seems I can connect to the database:
R>
R> library(ORE)
Loading required package: OREbase
Attaching package: ‘OREbase’
The following object(s) are masked from ‘package:base’:
cbind, data.frame, eval, interaction, order, paste, pmax, pmin, rbind, table
Loading required package: OREstats
Loading required package: MASS
Loading required package: OREgraphics
Loading required package: OREeda
Loading required package: OREdm
Loading required package: lattice
Loading required package: OREpredict
Loading required package: ORExml
R>
R>
R>
R> ore.connect(user = 'scott', sid = 'sinha', host = 'win7', password = 'tiger', port = 1521, all = T)
Error in .oci.GetQuery(conn, statement, data = data, prefetch = prefetch, :
ORA-06520: PL/SQL: Error loading external library
ORA-06522: Unable to load DLL
ORA-06512: at "RQSYS.RQEVALIMPL", line 17
ORA-06512: at "RQSYS.RQEVALIMPL", line 14
ORA-06512: at line 4
R>
R>
R> ore.is.connected()
[1] TRUE
R> I get the exact same error when I try to use even the ORE user "rquser". Any suggestion how to resolve this error?
Thanks,
Sourabh -
Oracle 11g XE - Installation Error
I am trying to install oracle xe 11g on my Win XP. The installation goes thru well. But when we start the database it starts too. However If I want to login it wont allow.
I tried to use connect using sys account as sysdba I get the following message:
Connected to an idle instance.
After some investigation I figured that there is a script that is not properly formatted in 'postDBCreation.sql". The following is the change that I found the error:
create spfile='C:\oraclexe\app\oracle\product\11.2.0\server\dbs/spfileXE.ora' FROM pfile='C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\init.ora';
This should have been like below
create spfile='C:\oraclexe\app\oracle\product\11.2.0\server\dbs\spfileXE.ora' FROM pfile='C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\init.ora';
After this change I tried to run XE.Bat file but it is throughing all kinds of SQL errors.
Can someone tell me what is wrong with this beta version of the Oracle 11g XE installation.
Lastly get started link also is not working too!!!
Thanks much in advance,
SBuser10958841 wrote:
I am trying to install oracle xe 11g on my Win XP. What "kind" of XP; SP? Edition? 32- or 64-bit?
I tried to use connect using sys account as sysdba I get the following message:
Connected to an idle instance.In that case,
C:\Users\Test>sqlplus / as sysdba
SQL*Plus: Release 11.2.0.2.0 Beta on On Apr 27 00:01:01 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 598437888 bytes
Fixed Size 1385180 bytes
Variable Size 268438820 bytes
Database Buffers 322961408 bytes
Redo Buffers 5652480 bytes
Database mounted.
Database opened.
SQL>
After some investigation I figured that there is a script that is not properly formatted in 'postDBCreation.sql". The following is the change that I found the error:
create spfile='C:\oraclexe\app\oracle\product\11.2.0\server\dbs/spfileXE.ora' FROM pfile='C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\init.ora';That forward slash is likely not causing any problem.
{code}
SQL> create spfile='?\dbs/spfile_justatest_fw_slash' FROM pfile='?\config\scripts\init.ora';
File created.
{code}
(sqlplus replaces ? with path of Oracle home.)
After this change I tried to run XE.Bat file but it is throughing all kinds of SQL errors.You need to re-install.
Lastly get started link also is not working too!!!See other threads in this forum on the similar subject (e.g. use Search Forum with keywords +get +started).
Edited by: orafad on Apr 27, 2011 12:20 AM
Edited by: orafad on Apr 27, 2011 12:32 AM -
Oracle service registry installation error
I am getting installation error while trying to install Oracle Service Registry 11.1.1 on weblogic 11g....
any suggestion.
oracle.database.user=uddiuser
install.windows.menu=Oracle Service Registry 11.1.1
oracle.database.password=***
[java] BUILD FAILED
[java] C:\oracle\middleware\registry111\etc\setup\porting.xml:412: The following error occurred while executing this line:
[java] C:\oracle\middleware\registry111\etc\setup\porting.xml:350: The following error occurred while executing this line:
[java] C:\oracle\middleware\registry111\conf\porting\build-runner.xml:196: The following error occurred while executing this line:
[java] C:\oracle\middleware\registry111\conf\porting\build-runner.xml:202: The following error occurred while executing this line:
[java] C:\oracle\middleware\registry111\conf\porting\build-runner.xml:208: The following error occurred while executing this line:
[java] C:\oracle\middleware\registry111\conf\porting\build-ear.xml:257: The following error occurred while executing this line:
[java] C:\oracle\middleware\registry111\conf\porting\build-ear.xml:1031: The following error occurred while executing this line:
[java] C:\oracle\middleware\registry111\etc\setup\setupserver.xml:788: The following error occurred while executing this line:
[java] C:\oracle\middleware\registry111\etc\setup\setupserver.xml:774: Java returned: 1
[java] Total time: 3 minutes 22 seconds
Java returned: 1
Installation failed. If accessible, see "C:\oracle\middleware\registry111\log\install.log".
To correct installation parameters and resume installation click Recovery.
.I have used the oracle's OSR installation guide. I beg to differ if OSR is really enterprise ready product.
I dont think this is a specific problem with my installation. The point is that the installation logs is very poor to put it mildly.
you get a sense that this product is developed by school student and is not an enterprise ready software.
WebLogic Server Version: 10.3.4.0
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=
128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;;
C:\Oracle\MIDDLE~1\ORACLE~2\lib\osb-server-modules-ref.jar;C:\Oracle\MIDDLE~1\pa
tch_wls1034\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle
\MIDDLE~1\patch_oepe1040\profiles\default\sys_manifest_classpath\weblogic_patch.
jar;C:\Oracle\MIDDLE~1\patch_ocp360\profiles\default\sys_manifest_classpath\webl
ogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSE
RV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblo
gic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.4.0.jar
;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\mod
ules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-
contrib.jar;C:\Oracle\Middleware\Oracle_OSB1\soa\modules\oracle.soa.common.adapt
ers_11.1.1\oracle.soa.common.adapters.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\or
acle.jrf_11.1.1\jrf.jar;C:\Oracle\MIDDLE~1\ORACLE~2\lib\version.jar;C:\Oracle\MI
DDLE~1\ORACLE~2\lib\alsb.jar;C:\Oracle\MIDDLE~1\ORACLE~2\3rdparty\lib\j2ssh-ant.
jar;C:\Oracle\MIDDLE~1\ORACLE~2\3rdparty\lib\j2ssh-common.jar;C:\Oracle\MIDDLE~1
\ORACLE~2\3rdparty\lib\j2ssh-core.jar;C:\Oracle\MIDDLE~1\ORACLE~2\3rdparty\lib\j
2ssh-dameon.jar;C:\Oracle\MIDDLE~1\ORACLE~2\3rdparty\classes;C:\Oracle\MIDDLE~1\
ORACLE~2\lib\external\log4j_1.2.8.jar;C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D
~1\config\osb;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\
Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;.;C:\Program Files\Java\jre6\lib\
ext\QTJava.zip;C:\Program Files\Rational\ClearQuest\cqjni.jar
PATH=C:\Oracle\MIDDLE~1\patch_wls1034\profiles\default\native;C:\Oracle\MIDDLE~1
\patch_oepe1040\profiles\default\native;C:\Oracle\MIDDLE~1\patch_ocp360\profiles
\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MID
DLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\
MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\oraclexe\app\oracle
\product\10.2.0\server\bin;C:\Program Files\Java\jdk1.6.0_24\bin;C:\progra~1\ora
cle\ora92\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\
1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Fil
es\QuickTime\QTSystem\;C:\Program Files\Rational\common;C:\Program Files\Rationa
l\ClearCase\bin;C:\Program Files\Cepstral\bin;C:\apache-maven-2.0.11\bin;C:\apac
he-ant-1.8.2\bin;C:\Program Files\Enterprise Vault\EVClient\;C:\Oracle\MIDDLE~1\
WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
Listening for transport dt_socket at address: 8453
java version "1.6.0_21"
Java(TM) SE Runtime Environment (build 1.6.0_21-b51)
Java HotSpot(TM) Client VM (build 17.0-b17, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xdebug -Xnoagent -Xrunjdwp:transpo
rt=dt_socket,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms256m -Xmx
512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogi
c.Name=AdminServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\l
ib\weblogic.policy -Xverify:none -da:org.apache.xmlbeans... -ea -da:com.bea..
. -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:co
m.bea.sbconsole... -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\O
racle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\s
erver -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1
-Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -D
domain.home=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1 -Djrockit.optfile=C:\Or
acle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.se
rver.config.dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\FMWCON~1\ser
vers\AdminServer -Doracle.domain.config.dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\
BASE_D~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\Oracle\MIDDLE~1\USER_P~1
\domains\BASE_D~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Oracle\MIDDLE
~1\USER_P~1\domains\BASE_D~1\config\FMWCON~1\arisidprovider -Doracle.security.jp
s.config=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\fmwconfig\jps-confi
g.xml -Doracle.deployed.app.dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\ser
vers\AdminServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateT
ypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracl
e\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pk
gs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dweblogic.mana
gement.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToCo
nsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1034\profiles\default\sys
ext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_oepe1040\profiles\default\sysext
manifestclasspath;C:\Oracle\MIDDLE~1\patch_ocp360\profiles\default\sysext_mani
fest_classpath weblogic.Server
Listening for transport dt_socket at address: 8453
<Apr 14, 2011 10:42:50 AM CDT> <Info> <Security> <BEA-090905> <Disabling CryptoJ
JCE Provider self-integrity check for better startup performance. To enable thi
s check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Apr 14, 2011 10:42:51 AM CDT> <Info> <Security> <BEA-090906> <Changing the defa
ult Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disabl
e this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Apr 14, 2011 10:42:52 AM CDT> <Info> <WebLogicServer> <BEA-000377> <Starting We
bLogic Server with Java HotSpot(TM) Client VM Version 17.0-b17 from Sun Microsys
tems Inc.>
Let me know if you need more information.
Thanks -
Oracle Express 11g installation issue
I have a Windows 7 Enterprise (x64). I am trying to install Oracle Express 11g but at the product prerequisite check shows:
Checking for Oracle XE service instance FAILED
the other checks succeed.
I have already installed Oracle Express 10g on my Windows. My first question is can 10g express and 11g express co-exist?
I am not sure what this FAILED check means??
ThanksThis is one of the XE restrictions (compared to other editions), you can only have one XE installation on your machine:
http://download.oracle.com/docs/cd/E17781_01/install.112/e18803/toc.htm#BEIEJGGF
Werner -
Oracle Grid cluster Installation error
Dear Guru's ;
I didn't created Virtual IP, I just defined it in DNS like SCAN name... During installation I'm facing following error.Please help me I'm just a trainee. If i done this installation then only i can get job...
INS-20802 Grid Infrastructure Configuration failed.
Cause - The plug-in failed in its perform method
and INS-20802-Oracle Private Interconnect Configuration Assistant.
Cause - The plug-in failed in its perform method
in logs file
Starting 'Grid Infrastructure Configuration'
INFO: Starting 'Grid Infrastructure Configuration'
INFO:
INFO: C:\WINDOWS\Temp>I:\app\11.2.0\grid/perl/bin/perl -II:\app\11.2.0\grid\perl\lib -II:\app\11.2.0\grid\crs\install I:\app\11.2.0\grid\crs\install\rootcrs.pl
INFO: 2012-09-14 16:51:54: Parsing the host name
INFO: 2012-09-14 16:51:54: Checking for super user privileges
INFO: 2012-09-14 16:51:54: superUser=Administrator groupName=Administrators
INFO: 2012-09-14 16:51:54: domain=VENSARS user=ADMINISTRATOR
INFO: 2012-09-14 16:51:54: User has Administrator privileges
INFO: Using configuration parameter file: I:\app\11.2.0\grid\crs\install\crsconfig_params
INFO:
INFO: C:\WINDOWS\Temp>exit /B 1
INFO:
WARNING:
INFO: Completed Plugin named: Grid Infrastructure Configuration
INFO: Grid Infrastructure Configuration failed.
INFO: Grid Infrastructure Configuration failed.
INFO: ConfigClient.executeSelectedToolsInAggregate action performed
INFO: Exiting ConfigClient.executeSelectedToolsInAggregate method
INFO:
The Runconfig command constructed is I:\app\11.2.0\grid\oui\bin\runConfig.bat ORACLE_HOME=I:\app\11.2.0\grid MODE=perform ACTION=configure RERUN=false $*
INFO: Since the option is to overwrite the existing I:\app\11.2.0\grid\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is I:\app\11.2.0\grid\cfgtoollogs\configToolFailedCommands.bak.1
WARNING: readme.txt file doesn't exits
And Starting 'Oracle Private Interconnect Configuration Assistant'
INFO: Starting 'Oracle Private Interconnect Configuration Assistant'
INFO: PRIF-10: failed to initialize the cluster registry
INFO:
WARNING:
INFO: Completed Plugin named: Oracle Private Interconnect Configuration Assistant
INFO: Oracle Private Interconnect Configuration Assistant failed.
INFO: Oracle Private Interconnect Configuration Assistant failed.
INFO: ConfigClient.executeSelectedToolsInAggregate action performed
INFO: Exiting ConfigClient.executeSelectedToolsInAggregate method
INFO:
The Runconfig command constructed is I:\app\11.2.0\grid\oui\bin\runConfig.bat ORACLE_HOME=I:\app\11.2.0\grid MODE=perform ACTION=configure RERUN=false $*
INFO: Since the option is to overwrite the existing I:\app\11.2.0\grid\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is I:\app\11.2.0\grid\cfgtoollogs\configToolFailedCommands.bak.2
WARNING: readme.txt file doesn't exits
I'm installing Oracle 11.2.0.1.0 on windows 2003 server
Please help me...How can i resolve it...hi,
pls take a look at tihs doc from metalink
Windows: [INS-20802] Grid Infrastructure Configuration Failed as Local Node can not get Correct status of crssetup.exe on Remote Node [ID 1215613.1]
regards, -
Oracle 10g Database installation error
I have come up with the message below when I click on setup.exe to launch OUI.
Using paramFile: C:\Oracle_Setup\stage\Components\oracle.swd.oui\2.3.0.10.0\1\DataFiles\Expanded\bin\win32\oraparam.ini
Checking requirements...
Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2.
Actual 5.1 Passed
Checking monitor: must be configured to display at least 256 colors.
Actual 65536 Passed
Checking if CPU speed is above 300 MHz.
Actual 3006MHz Passed
All requirements met.
However, when the checking requirements process is done,
there's pop up window titled "Java Virtual Machine Launcher" saying "Could not find the main class. Program will exit".
I have tried to change the location of JRE in oraparam.ini file for searching the main class. But it does not work. Please help. Is this because my oraparam.ini does not indicate the location of the main class required for the JVM launcher?
Thank you very muchThanks for the help. However, I am not sure what you meant in your answer.
Let me show my oraparam.ini file below. Please let me know if there's anything to be changed in the file. Thanks a lot.
[Oracle]
DISTRIBUTION=FALSE
SOURCE=C:\Oracle_Setup\stage\products.jar
LICENSE_LOCATION=
JRE_LOCATION=C:\Oracle_Setup\stage\Components\oracle.swd.jre\1.4.2.0.0\1\DataFiles\Expanded
OUI_LOCATION=C:\Oracle_Setup\stage\Components\oracle.swd.oui\2.3.0.10.0\1\DataFiles\Expanded\ouica\win32
OUI_CORE_LOCATION=C:\Oracle_Setup\stage\Components\oracle.swd.oui\2.3.0.10.0\1\DataFiles\Expanded
DEFAULT_HOME_LOCATION=
DEFAULT_HOME_NAME=
"OUIHome"
NLS_ENABLED=TRUE
JRE_MEMORY_OPTIONS=" -mx96m"
NO_BROWSE=/net
BOOTSTRAP=FALSE
THIN_JDBC_FILENAME=classes12.jar
#THIN_JDBC_FILENAME is optional and defaults to classes12.jar
#The value specified for this should be packaged with OUI, and should
#be relative to <OUI expanded stagedir>/jlib/
THIN_JDBC_FILENAME=classes12.jar
#JRE_OSDPARAM is to set OS dependent param for JRE ( mainly for native VM in 1.3.1)
#JRE_OSDPARAM is optional and should be set to -native for the JRE's
#that support native VM ( mainly for Unix platforms ), in JRE 1.3.1
#For JRE 1.4.1 this should be set to empty or the type of VM that is
#supported client/server. The default value is -native in UNIX platforms
#that supports native VM
#Unix supporting native -
JRE_OSDPARAM=""
CLUSTERWARE={"oracle.crs","10.1.0.2.0"}
#Unix NOT supporting native and 1.4.1 - JRE_OSDPARAM=""
#Windows : DO NOT SET or JRE_OSDPARAM=""
OUI_VERSION=<2.3.0.10.0>
#RUN_OUICA specifies the batch script name that needs to be run
#The script is ouica.bat for win32, and ouica.sh for solaris.
#If the value is not specified, then the OUICA script is not run
RUN_OUICA=ouica.bat
#SHOW_HOSTNAME=ALWAYS_SHOW
#shows the hostname panel always
SHOW_HOSTNAME=NEVER_SHOW
#does not the hostname panel
#SHOW_HOSTNAME=CONDITION_SHOW
#shows the hostname panel on condition
#SHOW_HOSTNAME=NEVER_SHOW
[Certified Versions]
#You can customise error message shown for failure through CERTIFIED_VERSION_FAILURE_MESSAGE
Solaris=5.6,5.7,5.8,5.9
Windows=4.0,5.0,5.1,5.2
Linux=redhat-2.1AS
HPUX=B.11.11
Decunix=V5.1A,V5.1
AIX=5.1.0.0
[Solaris-5.6-required]
#Minimum temp space required by OUI, Increase it if your product installation so requires
#Temp space is required for bootstrap and during installation
#The TEMP_SPACE should be the first pre-req to be checked
TEMP_SPACE=150
#PACKAGES required by JRE and Product, /usr/bin/pkginfo gets list of packages on system
PACKAGES=
#Use PACKAGES_FAILURE_MESSAGE for custom error message for PACKAGES check failure
#CPU speed required, use /usr/sbin/psrinfo -v to get the speed
CPU=300
#Use CPU_FAILURE_MESSAGE to display custom error message for CPU check failure
#MIN_DISPLAY_COLORS required by OUI, use /usr/openwin/bin/xdpyinfo to get the colors
MIN_DISPLAY_COLORS=256 -
Oracle forms --11g installation error
Hi All,
Configuration:
Oracle Database: 10.2.0.5
Oracle forms to be installed Version: 11.1.2.0.0
OS version: Windows 7, 64 Bit
JDK version:
java version "1.7.0_03"
Java(TM) SE Runtime Environment (build 1.7.0_03-b05)
Java HotSpot(TM) 64-Bit Server VM (build 22.1-b02, mixed mode)
I was installing oracle forms and encountered below error in "Installation Location" Phase:
1) INST-07407: Unable to detect machine platform or JVM bits
2) INST-07248: Specified Web logic home is not a valid Location
3) INST-07282: Specified Middleware home location does not exists
Appreciate Help.
Regards,
SKHi SK
This error is related to the wrong version of JDK u r using & the sequence u apply to install the Forms, Reports and Discoverer 11.1.1.2.0
java version "1.7.0_03" is not supported always it's not smart to always used the latest version of a software each has a compatable version related to each other.
pls uninstalled java version "1.7.0_03" (reason : for the wrong version used) & Oracle WebLogic Server 10.3.2(reason : for the wrong sequence used in installation)
Then installed the following jdk (a support version!)as a first step:
java version "1.6.0_26"
Java(TM) SE Runtime Environment (build 1.6.0_26-b03)
Java HotSpot(TM) 64-Bit Server VM (build 20.1-b02, mixed mode)
2.*re-installed Oracle WebLogic Server 10.3.2*
3. Finally, installed Oracle Portal, Forms, Reports and Discoverer 11.1.1.2.0
Pls read the following... Tips and Tricks
you may also need to read Quick Tips for Installing Forms 11g R2...
For more information ,if you have access to MyOracleSupport, you should access ...
note:854117.1 which shows the steps with nice clear screenshots.
If you want to see a video of the install steps then check out ...
note:1088873.1
To configure SSO with 11g you should go to
note:852352.1
and for maintenance information go to
note:1073776.1
Hope this helps...
Regards,
Amatu Allah -
Oracle 9.2 installation error message on window XP:
Hi all;
I am new to oracle and try to install oracle 9.2 on window XP professional. Everything went well except the error message:
Tehre is no non empty value found for variable j_Servport in \oracle\ora92\Apache\Apache\ports.ini
Here is the content of my ports.ini file ================================================
[Ports]
s_apachePort = 80
s_apachePortSSL = 443
[Ports]
s_apachePort = 80
s_apachePortSSL = 443
[Ports]
s_apachePort = 80
s_apachePortSSL = 443
s_jservPort = 8007
[Ports]
s_apachePort = 80
s_apachePortSSL = 443
s_jservPort = 8007
======================================
After the installation completed I was able to connect to my sql*plus and do some excersice. However, I connect to isqlplus (web access). I did follow the rule to connect to http://localhost:7778/isqlplus but the page didn't work.
Any suggestion?
Thanks.
LeahThe error message was:
Syntax error on line 92 of c:/oracle/ora92/sqlplus/admin/isqlplus.conf
FastCgiServer: redefinition of a previously defined FastCGI server
c:/oracle/ora92/bin/isqlplus
Here is my isqlplus.conf content
======================================================
# Copyright (c) 2001, 2002, Oracle Corporation. All rights reserved.
# NAME
# isqlplus.conf
# PURPOSE
# Oracle HTTP Server directives for the iSQL*Plus server
# USAGE
# This file should be included in the Oracle HTTP Server
# "oracle_apache.conf" file.
# Enable handling of all virtual paths beginning with "/iplus/"
# Note: only /iplus/ is mapped, /iplus is not being mapped
<IfModule mod_alias.c>
Alias /iplus/ "C:\oracle\ora92\sqlplus\admin\iplus/"
# Disallow users from trying to access /iplus/ directory listing
<Directory "C:\oracle\ora92\sqlplus\admin\iplus">
AllowOverride None
Options FollowSymLinks
Order deny,allow
Allow from all
</Directory>
</IfModule>
# Maps all virtual paths beginning with "/isqlplus*" to the iSQL*Plus
# FastCGI application
<IfModule mod_alias.c>
ScriptAliasMatch ^/isqlplus(.*) C:\oracle\ora92\bin\isqlplus
ScriptAliasMatch ^/isqlplusdba(.*) C:\oracle\ora92\bin\isqlplus
<Directory "C:\oracle\ora92\bin">
AllowOverride None
Options FollowSymLinks
Order deny,allow
Allow from all
</Directory>
</IfModule>
# Enable handling of all virtual paths beginning with "/isqlplus"
<Location /isqlplus>
SetHandler fastcgi-script
Order deny,allow
# Comment "Allow ..." and uncomment the four lines "AuthType ..."
# to "Require ..." if Oracle HTTP authentication access is required
# for the http://.../isqlplus URL
Allow from all
#AuthType Basic
#AuthName 'iSQL*Plus'
#AuthUserFile C:\oracle\ora92\sqlplus\admin\iplus.pw
#Require valid-user
</Location>
# Enable handling of all virtual paths beginning with "/isqlplusdba".
# Note: Oracle HTTP authentication access must be configured to
# prevent unauthorized users performing DBA operations on
# the database
# Use the HTTP server utility script "htpasswd" to add users to the
# "iplusdba.pw" file.
<Location /isqlplusdba>
SetHandler fastcgi-script
Order deny,allow
AuthType Basic
AuthName 'iSQL*Plus DBA'
AuthUserFile C:\oracle\ora92\sqlplus\admin\iplusdba.pw
Require valid-user
</Location>
# Setup the iSQL*Plus FastCGI application.
<IfModule mod_fastcgi.c>
FastCgiServer C:\oracle\ora92\bin\isqlplus -port 8228 -initial-env iSQLPlusNumberOfThreads=20 -initial-env iSQLPlusTimeOutInterval=30 -initial-env iSQLPlusLogLevel=off -initial-env iSQLPlusAllowUserEntMap=none -idle-timeout 3600
</IfModule>
==============================================
I did reinstall a few times if this would give you some hints.
Thanks.
Leah. -
Oracle 8i Client Installation Error
Hi,
Could anyone tell me what's wrong when JREW error occur during Oracle Client Installation? How to overcome this problem?
The details are:
This program has performed an illegal operation and will be shut down.
Jrew caused an invalid page fault in module JAVAI.DLL at 018f:6ee37f8a.
Registers: bla-bla-bla ......
Thanks in advance.
RichardCurrently no oracle software is certified on Win 8.1, so your attempt may or may not succeed. If it does succeed, the software may or may not work as expected. What is the business/technical reason for installing on an unsupported OS ?
HTH
Srini -
Oracle Entitlement Server Installation Error
As per tutorial I am installed the oracle10g data base and downloaded
OES10.1.4.3.0_DBConfigTool_win32.zip file and executed the batch see the below steps I am getting the below error
Any solution for this error
** Unable to create ALES Database Account **
java.sql.SQLException: Io exception: Bad packet type
C:\software\OES\OES10.1.4.3.0_DBConfigTool_win32>DBConfige
Please input Database type <oracle|sybase|mssql|pointbase>: oracle
Enter the JDBC URL for the database server.
Eg. Oracle - jdbc:oracle:thin:@myDBserver:1521:myDBsid
Please input JDBC URL: jdbc:oracle:thin:@home-646401ebee:5503:anilkumar
Enter the JDBC driver used to connect to the database.
Eg. Oracle - oracle.jdbc.driver.OracleDriver
Please input JDBC Driver: oracle.jdbc.driver.OracleDriver
Please input new database user name: anilkumar
Enter new database user password:
Confirm new database user password:
Please input database admin name (Eg. sys): system
Please input database admin password:
** Unable to create ALES Database Account **
java.sql.SQLException: Io exception: Bad packet type
C:\software\OES\OES10.1.4.3.0_DBConfigTool_win32>
Thanks,
Venkata SarvabatlaHi,
As a quick test, can you check whether you are able to connect to that Oracle DB using sys?
If DB is in remote machine, please check the accessibility.
If you are still not able to do it with db config tool, you can try manually using the link
-Mahendra. -
Oracle BI Publisher Installation error - please help
Hi,
I am trying to install Oracle BI Publisher 10.1.3.4.1 for Windows x86... I downloaded it from Oracle website and unzipped on my local machine. When I click on setup.exe file, Oracle Universal Installer screen appear (kind of command prompt) and it check installer requirements (highlighted in bottom) and disappear automatically....nothing happen after this... no log..no error... i don't understand what happening.
If anybody knows this issue then please let me know how should i installed this oracle product
==================
Using paramFile: C:\Documents and Settings\sjaiswa\My Documents\Downloads\Oracle_Business_Intelligence_Publisher_Standalone\install\oraparam.ini
Checking installer requirements...
Checking operating system version: must be 4.0, 5.0, 5.1, 5.2 or 6.0. Actual 5.1 Passed
Checking monitor: must be configured to display at least 256 colors. Actual 4294967296 Passed
Checking Temp space: must be greater than 500 MB. Actual 278727 MB Passed
Checking swap space: must be greater than 500 MB. Actual 1024MB Passed
All installer requirements met.
===================Thanks everyone... please ignore this post... i got answer myself. The problem was coming due to blank space between directory name. I changed temp directory location in system variable and now setup in running fine.
-
Windows Oracle x86_64 bit Installation Error
Hi,
I am installing a new system on Windows Server 2003 Enterprise R2 x64 Edition and Oracle 10.2 as the database. The product is R/3 Enterprise 4.7 X 1.10 SR1.
According to the note 899111, I have taken the Installation master for R/3 4.7 X 2.00 SR1 and the export CD's from R/3 4.7 X 1.10 SR1.
I have installed the Central Instance successfully, but while
installing the database instance, I get the following error -
CJS 0030 Assertion failed : OraCommonParatersWin.
computeDependantParametersAfterDialog: sapdataHome is empty after dialog
Also, the database home field (with the drop down) is empty in this screen (after clicking next this error occurs).
There were 2 notes - 969696 and 919106 which had the same error but the scenarios didn't apply to us.
Please help me and let me know why this error is occuring, I have restarted the database instance installation several times and even downloaded the Master CD twice from the marketplace in case the file would have been corrupted during the download the first time.
Thanks,
Neha BhardwajHi,
you already checked folloiwng note which is for NW04s
Note 919106 - SAP NetWeaver 7.0 SR1 Installation on Windows: Oracle
this error occured during installation.
but i suggested that you try folloiwng solution.
CJS-00030 Assertion failed:
OraCommonParametersWin.computeDependantParametersAfterDialog:
sapdataHome is empty after dialog.
Solution:
Change the following line in the 'control.xml' file from
if (!OraBackRel.isBackRel(dbSid) || "DB" == instanceType ) {
into
if ( "DB" == instanceType ) {
Then restart SAPinst and choose "Continue old installation".
regards,
kaushal
Maybe you are looking for
-
Why do my 3rd party loops not appear in the "Loop" tab?
I have saved some Magix wav loops into the local apple users directory of Logic Express and though I can find them using the media browser they do not appear in the loops tab listing. Does anybody know the cure for this?
-
Every since I updated to version 4 my browser has been constantly crashing, especially when I have a few tabs open. I need to give up on this version. My computer is windows XP sp3. Can I uninstall version 4 and install an earlier version and still g
-
Can anyone help out on this as it is really annoying. Thanks
-
hi dear gurus, can u explain me the Advance Payment to Vendor ,(Down payment cycle in SAP), if any T.Code plz send me. hopeeeeeeeee.............
-
Hi All, I am trying to post customer invoice , i am getting the following error G/L account requires CO account assignment object. I do not want to give any cost center as it is a revenue posting. I tried checking the field status group attached to G