Oracle Failsafe Manager

Guys,
I am planning to install Oracle - 9i DB with Oracle FailSafe Manager on MSCS (Microsoft Cluster Services)
I am following the belows steps
1. Install Oracle - 9i
2. Patch it with 9.2.0.5
3. Setup MSCS services
4. Install Oracle Failsafe Manager on each node
Please do share your thoughts/inputs about the procedure I am following here
Thanks

I am also palnning to do the same I will contact u when i proceed and please if u get any info please let me know
thanks
ali

Similar Messages

Error in Verify Cluster of Oracle FailSafe Manager

Hello,
I am doing SAP ERP6.0 installation on MSCS cluster environment. I have finished the following steps
ASCS Installation,First MSCS Node Configuration,Database Instance Installation,Additional MSCS node configuration, Enqueue Replication Server Installation and Central Instance Installation.
I am now creating the Oracle FailSafe Group on the MSCS node which has the quorum resource in my case the DB node.
After adding the Cluster when I click on Verify Cluster I get error. Below is the VerifyCluster log
1   15:06:04 Starting clusterwide operation
2   15:06:04   > FS-10998:
3   15:06:04 FS-10500: POPWRMSSAPDB : Starting verification of cluster PWRCLUS01
4   15:06:04   > FS-10998:
5   15:06:04 FS-10544: POPWRMSSAPDB : Verifying the cluster quorum resource
6   15:06:04   > FS-10545: Cluster quorum resource QUORUM is located at Q:\Cluster\
7   15:06:04   > FS-10998:
8   15:06:05    ** ERROR : 0x80010105: The server threw an exception.
9   15:06:05    ** ERROR : FS-10757: A COM error was returned when trying to send a work item to the worker
10 15:06:06 The clusterwide operation failed !
Kindly suggest what action should I take to resolve this error.
Regards
Mitesh Nair

Hi and welcome to the forums!
Here are some possible reasons and resolutions.
Let us know how it goes!
Thanks,
Bifocals
KB28396 When installing the BlackBerry Desktop software the following error is received "The installation files cannot be validated. Please verify the installer package and try again."
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

HELP! Oracle FailSafe - Listener fails when adding standalone database

Well, I have a cluster of two nodes with the following specs:
(1) an Oracle 10g database each
(2) Microsoft Cluster Service (MSCS)
(3) Windows Server 2003 64-bit edition
(4) Intel Itanium Processor
(5) Oracle Failsafe 3.3.3 for Windows 2003 64-bit
The 64-bit Oracle Failsafe doesn't come with Oracle Failsafe Manager, so I used a Failsafe Manager remotely from another clustered servers. The version is also 3.3.3, but it's running on a Windows 2000 Advanced Server.
Well, after connecting to the 64-bit cluster, I added the standalone database to a Cluster Group. There are two cluster groups on the Server:
(1)"Cluster Group" (the default cluster group created by MSCS); containing an IP address, a network name, Oracle Cluster Services, and the Quorum hard drive.
(1)"ORACLE DB" A cluster gropu I created for the database; containing another IP address, a network name for the IP address, and every hard drive volumes of the database files.
The database currently resides on the Node 2 (because I created it there). I have successfully verified the database (using "Verify Standalone Database" option). BUT when I added the database into the cluster group ORACLE DB, it failed with the following message:
23 20:48:48 ** ERROR : FS-10066: Failed to start Windows service OracleOraDb10g_home1TNSListener for the Oracle Net listener
When I opened the Windows Event Viewer, apparently the Listener Service had started, but it soon "terminated unexpectedly":
At first, the Listener Service appeared to be started:
But this is what happened next; it seemed the Listener Service terminated abruptly after entering the running state for a very short time:
What happened? What should I do? What is the problem? Many thanks!
PS: the following are the messages from both Verifying Standalone Database and Adding Standalone Database. The verification was successfull, but I just failed to add the database:
>
Versions: client = 3.3.3 server = 3.3.3 OS =
Operation: Verifying standalone database "PAYMENT"
Starting Time: May 11, 2005 19:50:11
Elapsed Time: 0 minutes, 4 seconds
1 19:50:11 Starting clusterwide operation
2 19:50:11 FS-10915: POSDB2 : Starting the verification of standalone resource PAYMENT
3 19:50:11 FS-10371: POSDB2 : Performing initialization processing
4 19:50:11 FS-10371: POSDB1 : Performing initialization processing
5 19:50:12 FS-10372: POSDB2 : Gathering resource owner information
6 19:50:12 FS-10372: POSDB1 : Gathering resource owner information
7 19:50:12 FS-10373: POSDB2 : Determining owner node of resource PAYMENT
8 19:50:12 FS-10374: POSDB2 : Gathering cluster information needed to perform the specified operation
9 19:50:12 FS-10374: POSDB1 : Gathering cluster information needed to perform the specified operation
10 19:50:12 FS-10375: POSDB2 : Analyzing cluster information needed to perform the specified operation
11 19:50:12 FS-10378: POSDB2 : Preparing for configuration of resource PAYMENT
12 19:50:12 ** WARNING : FS-10247: The database parameter file H:\PAYMENT\admin\pfile\pfilePAYMENT.ora specified for this operation will override the parameter file value in the registry
13 19:50:12 ** WARNING : FS-10248: At registry key SOFTWARE\ORACLE\KEY_OraDb10g_home1, value of ORA_PAYMENT_PFILE is H:\PAYMENT\admin\pfile
14 19:50:12 FS-10916: POSDB2 : Verification of the standalone resource
15 19:50:12 > FS-10341: Starting verification of database PAYMENT
16 19:50:13 > FS-10342: Starting verification of Oracle Net configuration information for database PAYMENT
17 19:50:13 > FS-10496: Generating the Oracle Net migration plan for PAYMENT
18 19:50:13 > FS-10491: Configuring the Oracle Net service name for PAYMENT
19 19:50:13 > FS-10343: Starting verification of database instance information for database PAYMENT
20 19:50:13 >> FS-10347: Checking the state of database PAYMENT
21 19:50:13 >> FS-10425: Querying the disks used by the database PAYMENT
22 19:50:15 > FS-10344: Starting verification of Oracle Intelligent Agent for database PAYMENT
23 19:50:15 > FS-10345: Verification of standalone database PAYMENT completed successfully
24 19:50:15 FS-10917: POSDB2 : Standalone resource PAYMENT was verified successfully
25 19:50:15 FS-10378: POSDB1 : Preparing for configuration of resource PAYMENT
26 19:50:15 FS-10916: POSDB1 : Verification of the standalone resource
27 19:50:15 > FS-10341: Starting verification of database PAYMENT
28 19:50:15 > FS-10342: Starting verification of Oracle Net configuration information for database PAYMENT
29 19:50:15 > FS-10496: Generating the Oracle Net migration plan for PAYMENT
30 19:50:15 > FS-10491: Configuring the Oracle Net service name for PAYMENT
31 19:50:15 > FS-10343: Starting verification of database instance information for database PAYMENT
32 19:50:15 > FS-10344: Starting verification of Oracle Intelligent Agent for database PAYMENT
33 19:50:15 > FS-10345: Verification of standalone database PAYMENT completed successfully
34 19:50:15 FS-10917: POSDB1 : Standalone resource PAYMENT was verified successfully
35 19:50:15 The clusterwide operation completed successfully, however, the server reported some warnings.
>
Versions: client = 3.3.3 server = 3.3.3 OS =
Operation: Adding resource "PAYMENT" to group "ORACLE DATABASE"
Starting Time: May 11, 2005 20:48:43
Elapsed Time: 0 minutes, 7 seconds
1 20:48:43 Starting clusterwide operation
2 20:48:44 FS-10370: Adding the resource PAYMENT to group ORACLE DATABASE
3 20:48:44 FS-10371: POSDB2 : Performing initialization processing
4 20:48:44 FS-10371: POSDB1 : Performing initialization processing
5 20:48:45 FS-10372: POSDB2 : Gathering resource owner information
6 20:48:45 FS-10372: POSDB1 : Gathering resource owner information
7 20:48:45 FS-10373: POSDB2 : Determining owner node of resource PAYMENT
8 20:48:45 FS-10374: POSDB2 : Gathering cluster information needed to perform the specified operation
9 20:48:45 FS-10374: POSDB1 : Gathering cluster information needed to perform the specified operation
10 20:48:45 FS-10375: POSDB2 : Analyzing cluster information needed to perform the specified operation
11 20:48:45 >>> FS-10652: POSDB2 has Oracle Database version 10.1.0 installed in ORADB10G_HOME1
12 20:48:45 >>> FS-10652: POSDB1 has Oracle Database version 10.1.0 installed in ORADB10G_HOME1
13 20:48:45 FS-10376: POSDB2 : Starting configuration of resource PAYMENT
14 20:48:45 FS-10378: POSDB2 : Preparing for configuration of resource PAYMENT
15 20:48:46 FS-10380: POSDB2 : Configuring virtual server information for resource PAYMENT
16 20:48:46 ** WARNING : FS-10247: The database parameter file H:\PAYMENT\admin\pfile\pfilePAYMENT.ora specified for this operation will override the parameter file value in the registry
17 20:48:46 ** WARNING : FS-10248: At registry key SOFTWARE\ORACLE\KEY_OraDb10g_home1, value of ORA_PAYMENT_PFILE is H:\PAYMENT\admin\pfile
18 20:48:46 > FS-10496: Generating the Oracle Net migration plan for PAYMENT
19 20:48:46 > FS-10490: Configuring the Oracle Net listener for PAYMENT
20 20:48:46 >> FS-10600: Oracle Net configuration file updated: F:\ORACLE\PRODUCT\10.1.0\DB_1\NETWORK\ADMIN\LISTENER.ORA
21 20:48:46 >> FS-10606: Listener configuration updated in database parameter file: H:\PAYMENT\admin\pfile\pfilePAYMENT.ora
22 20:48:47 >> FS-10605: Oracle Net listener Fslpos created
23 20:48:48 ** ERROR : FS-10066: Failed to start Windows service OracleOraDb10g_home1TNSListener for the Oracle Net listener
24 20:48:48 ** ERROR : FS-10065: Error trying to configure the Oracle Net listener
25 20:48:48 > FS-10090: Rolling back Oracle Net changes on node POSDB2
26 20:48:50 ** ERROR : FS-10784: The Oracle Database resource provider failed to configure the virtual server for resource PAYMENT
27 20:48:50 ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
28 20:48:50 ** ERROR : FS-10497: Starting clusterwide rollback of the operation
29 20:48:50 FS-10488: POSDB2 : Starting rollback of operation
30 20:48:50 FS-10489: POSDB2 : Completed rollback of operation
31 20:48:50 ** ERROR : FS-10495: Clusterwide rollback of the operation has been completed
32 20:48:50 Please check your Windows Application log using the Event Viewer for any additional errors
33 20:48:50 The clusterwide operation failed !

umm... help? Anyone?

Doubts on Oracle Failsafe Shutdown Process

Hello
We have the following configuration in our place.
Two Node Windows Server 2003 Cluster. (Active/Passive Configuration)
Oracle 10.1 Home on Both the nodes.
The database server, datafiles, redo log files are on the shared disk.
Oracle Failsafe Manager 3.4.1 is running on both the nodes.
Now We want to shutdown the whole database and cluster for a migration purpose.We should the system and then SAN sync the image to another place and restart it there.So I need a procedure for clean shutdown and clean startup.By going the Failsafe Documentation and other articles in goggle,I have not got a clear idea about the shutdown process.
As per the documentation ,
For maintenance issues like cold back up ,The process to be followed is:
1.Take the database offline from Oracle Failsafe Manager and it will shutdown the database.
The questions I have is :
1)If I take down the database from Oracle Failsafe Manager on the Active Node,is there any chance that the database will start on the passive node due to failover.
2) Do I have to first shutdown the passive node or put a freeze between the communication link so that it does not failover.
3) Do I have to take the shared disks ,Network Adapters offline from the failsafe manager for a complete shutdown or will the Windows Machine shutdown takes care of it.
Also can someone just throw a brief overview on how to start up the same database on the other cluster.
Any suggestions would be helpful .
Thanks
Sashank

>
The questions I have is :
1)If I take down the database from Oracle Failsafe Manager on the Active Node,is there any chance that the database will start on the passive node due to failover.
2) Do I have to first shutdown the passive node or put a freeze between the communication link so that it does not failover.
3) Do I have to take the shared disks ,Network Adapters offline from the failsafe manager for a complete shutdown or will the Windows Machine shutdown takes care of it.
Also can someone just throw a brief overview on how to start up the same database on the other cluster.
Any suggestions would be helpful .
Thanks
Sashank1- When you take it offline on Failsafe it won't come up on the other side till you bring it online.
2- no
3- again no
I could not get the last uestion but If you want to move resources to the other node it can be done via microsoft cluster services.
Coskan Gundogar
Blog: http://coskan.wordpress.com
Twitter: http://www.twitter.com/coskan
Linkedin: http://uk.linkedin.com/in/coskan
---------

Configure OEM on Oracle Failsafe 3.4.2 (11g R2) on windows 2008

Hi Friends,
Please let me know how to configure Oracle Enterprise Manager(OEM) On Oracle Failsafe 3.4.2 (11g R2 Database) on windows 2008.
I found a Metalink Note : 396659.1 but i am unable to open the Note.
Please provide the Proper Note.
Regards,
DB

I have the same problem.
My solution is:
1.add OFS group name mapping VIP in DNS
2.add VIP in MSCS manager
3.delete VIP in OFS manager
4.add VIP in OFS manager

Oracle FailSafe on Windows Cluster - Oracle Service Question

I'm running DB10G R2 on a 2 node Windows 2003 Server cluster.
I have configured Oracle FailSafe and the failover 'appears' to be working correctly but I'm confused as to what/how the DB service works.
When I switch between nodes the OracleService<SID> remains at Started on the node I'm switching from, the service on the newly 'active' node never starts. Is this expected behaviour?
The database is accessible from the clients but I'm guessing (am unable to test/prove) that if I power down node1 it won't be.

Why can't you test/prove what happens when you power down node1? A critical part of every cluster implementation should be to perform failure testing.
It's been a while since I've worked with Failsafe, but I do remember that all management is performed through the cluster manager application (can't remember what it is called exactly--the MSCS cluster admin tool). You shouldn't have to worry about the services. You should be able to relocate the database, it's storage (drives) and its associated IP address to the other cluster node and verify via the MSCS app that all services are running on that other node. At that point, the original node (node1 in this case) can be powered off, rolled out of the building, whatever you want--database should remain available on node2.
Dan

Oracle Failsafe + 11G + Windows 2008 Enterprise r2 64bits

Dear Friends,
I need to install a Oracle Fail Safe system on Windows 2008 Enterprise r2 using Oracle 11g, I have some question about this:
1-Can be installed Oracle FailSafe on a Oracle standard edition? or is complete necessary use Oracle Enterprise Edition? 11G.
2-There is a version for 64bits system of the Oracle FailSafe?
2-Failsafe and failsafe manager works under Windows 2008 Enterprise r2 64bits?
Thanks for all the answer.

1-Can be installed Oracle FailSafe on a Oracle standard edition? or is complete necessary use Oracle Enterprise Edition? 11G.Oracle Fail Safe environment recommends installing database software on a two-node cluster, so it is possible with 11G
2-There is a version for 64bits system of the Oracle FailSafe? 3-Failsafe and failsafe manager works under Windows 2008 Enterprise r2 64bits?Other two answers are given in the pdf at http://download.oracle.com/docs/cd/E10736_01/doc/relnotes.341/e10719.pdf. you must go through it thoroughly.

Oracle failsafe on MSCS

I'm not sure where but I think I missed a configuration somewhere. This is my first time installing and working with all this so I'm sure there is an easy answer I just don't have it.
I am running:
Windows 2008 R2 64bit
Oracle 11g R2 64bit
Failsafe 3.4.2
I have everything installed and "mostly" working.
Everything on the primary node seems to work fine. Everything went fairly smoothly and I was able to create the database and the listener and all that work perfectly on the primary node.
The problem is:
When I fail over to the secondary node the database seems to work and the applications can connect but sqlplus and EM don't. I get the typical:
ORA-12560: TNS:protocol adapter error
What configuration did I miss?
Glenn

How to Configure the 10.2 DB Control in a Failsafe Environment
ID: 452305.1
HOWTO: PUBLISHED 17-OCT-2008
In this Document
Goal
Solution
References
Applies to:
Enterprise Manager Grid Control - Version: 10.2.0.1 to 10.2.0.3
Information in this document applies to any platform.
Goal
The goal of the document is to provide the steps to configure the DB Console in an Oracle Failsafe environment.
Please note that the solution offered in this document is not certified by Oracle. It's only provided as a workaround for customers who wish to use this setup for the Database Control Console in a failsafe environment. Support for the procedure outlined in this document will be provided on a 'best efforts' approach.
As an alternative to this approach you can use Grid Control Agents to monitor a database in a failsafe environment. For more details please see:
Note 396659.1 How To Setup Grid Control Central Agent Manually in Oracle Failsafe Environment
We assume the following:
- the database binaries are installed on each node on the local disk
- you already have a failsafe group with the database, the listener, disk resource, and virtual
ip/hostname
Note: This is specific for Windows environments using Oracle Failsafe. For setting up the DB Console in Active/Passive clusters on UNIX please use the following note instead:
Note 362524.1 Configure DB Control 10.2 for use in Active/Passive High Availability Environments
Solution
1. Drop the DB Control repository and configuration files on the active node:
<ORACLE_HOME>/bin/emca -deconfig dbcontrol db -repos drop
2. Recreate the DB Control using the virtual hostname:
- in a command window do the following:
set oracle_sid=<your_sid>
set oracle_home=<your_oracle_home>
set oracle_hostname=<virtual_hostname>
cd %oracle_home%\bin
emca -config dbcontrol db -repos create
-- make sure that the virtual host name was picked up by emca (it will display a summary screen
before continuing)
3. Verify that the DB Console works fine and can be accessed using the virtual host name in the URL
4. Stop the DB Console
5. Create a directory path on the group disk resource similar to your oracle home path on the local disk.
For example:
If the oracle home on the local disk is C:\oracle\product\10.2.0\db_1 and the shared disk is D:
then create the following path: D:\oracle\product\10.2.0\db_1
Copy C:\oracle\product\10.2.0\db_1\<hostname_sid> and
C:\oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_<hostname_sid>
to D:\oracle\product\10.2.0\db_1\<hostname_sid> and respectively
D:\oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_<hostname_sid>
Remember to change the values enclosed in <> with those in your environment.
6. Delete the following directories from the local disk
C:\oracle\product\10.2.0\db_1\<hostname_sid>
C:\oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_<hostname_sid>
7. Create NTFS junction points from the local disk to the shared disk (these work like symbolic
links on UNIX) . It is your responsibility to create these.
You can find a brief guide as well as some tools that will help you create them at:
http://en.wikipedia.org/wiki/NTFS_junction_point
http://www.microsoft.com/technet ... dDisk/Junction.mspx
Important: Please note that this functionality is not certified nor supported by Oracle. Make sure you understand the
implications. Especially don't delete the junction points from Windows Explorer !!
In the end you should have the junction points on the local disk (with the same names as the
original directories) that would point to the directories you copied on the shared disk.
8. Start the DB Console service and verify that everything is still working fine.
9. Stop the DB Console service.
10. Move the Fail Safe group to the 2nd node.
11. Once the database is started, create the DB Console configuration files on the 2nd node:
<ORACLE_HOME>/bin/emca -config dbcontrol db
12. Stop the DB Console
13. Delete the created configuration files from the local disk:
C:\oracle\product\10.2.0\db_1\<hostname_sid>
C:\oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_<hostname_sid>
14. Create junction points from the local disk to the directories already located on the shared
disk.
15. Start the DB Console service and verify that is working fine.
16. Add the DB Console service as a resource to the fail safe group and put dependencies on the
database and listener services.
17. Perform a fail over and see if everything works fine.
References
Note 298238.1 - Oracle10g Grid Control with Oracle Fail Safe
Note 362524.1 - Configure DB Control 10.2, 11g for use in Active/Passive High Availability Environments
Note 396659.1 - How To Setup Grid Control Central Agent Manually in Oracle Failsafe Environment
Keywords
EMCA ; DB~CONTROL ; FAILSAFE ; DBCONTROL ; ENTERPRISE~MANAGER ;

Oracle Failsafe - Add Resource to Group

hi to all,
i have a question about using Oracle Failsafe.
I have had a 2 Node Cluster (Czvsor1 and czvsor2) with Clustergroup and Oracle Group with database db1 in it on node czvsor1 with perfect working failover to node czvsor2 managed by Failsafe Manager - All running on windows2003 server.
Now i wanted to bring up a third node czvsor3 with the database ORCFIBU on it, adding this node to cluster , creating a second oracle group on this node, add resource (database) to this group and manage it with failsafe manger to failover to my second node czvsor2 when needed.
Everything went perfect - adding node to cluster, creating and testing oracle group 2 with 2 SAN devices, moving oracle group no node 2 and back again.
BUT adding database to group failed - errors in verifying Devices
Here are the protokolls:
Verify Cluster
Versions: client = 3.3.3 server = 3.3.3 OS =
Operation: Verifying cluster "CZVSOR03"
Starting Time: Aug 08, 2007 10:42:51
Elapsed Time: 0 minutes, 1 seconds
1 10:42:51 Starting clusterwide operation
2 10:42:51 > FS-10998:
3 10:42:51 FS-10500: CZVSOR1 : Starting verification of cluster CZVSOR03
4 10:42:51 > FS-10998:
5 10:42:51 FS-10544: CZVSOR1 : Verifying the cluster quorum resource
6 10:42:51 > FS-10545: Cluster quorum resource Disk Q: is located at Q:\MSCS\
7 10:42:51 > FS-10998:
8 10:42:51 FS-10660: CZVSOR1 : Gathering cluster information
9 10:42:51 > FS-10998:
10 10:42:51 FS-10660: CZVSOR3 : Gathering cluster information
11 10:42:52 > FS-10998:
12 10:42:52 FS-10660: CZVSOR2 : Gathering cluster information
13 10:42:52 > FS-10998:
14 10:42:52 FS-10502: CZVSOR1 : Verifying the Oracle homes
15 10:42:52 > FS-10645: CZVSOR1 has home OfsHome33 in D:\oracle\Ofs33
16 10:42:52 > FS-10645: CZVSOR1 has home OraDb10g_Db in D:\oracle\product\10.2.0\db_1
17 10:42:52 > FS-10645: CZVSOR3 has home OfsHome33 in D:\oracle\Ofs33
18 10:42:52 > FS-10645: CZVSOR3 has home OraDb10g_Db in D:\oracle\product\10.2.0\db_1
19 10:42:52 > FS-10645: CZVSOR2 has home OfsHome33 in D:\oracle\Ofs33
20 10:42:52 > FS-10645: CZVSOR2 has home OraDb10g_Db in D:\oracle\product\10.2.0\db_1
21 10:42:52 > FS-10998:
22 10:42:52 FS-10501: CZVSOR1 : Verifying the Oracle Services for MSCS installation
23 10:42:52 >>> FS-10652: CZVSOR1 has Oracle Services for MSCS version 3.3.4.0 installed in OfsHome33
24 10:42:52 >>> FS-10652: CZVSOR3 has Oracle Services for MSCS version 3.3.4.0 installed in OfsHome33
25 10:42:52 >>> FS-10652: CZVSOR2 has Oracle Services for MSCS version 3.3.4.0 installed in OfsHome33
26 10:42:52 > FS-10998:
27 10:42:52 FS-10650: CZVSOR1 : Verifying the Oracle Services for MSCS resource providers
28 10:42:52 > FS-10651: Verifying the Generic Service resource
29 10:42:52 >> FS-10665: Checking DLLs for resource provider
30 10:42:52 > FS-10998:
31 10:42:52 > FS-10651: Verifying the Oracle Management Agent resource
32 10:42:52 >> FS-10665: Checking DLLs for resource provider
33 10:42:52 >> FS-10667: Checking for software installation
34 10:42:52 ** WARNING : FS-10658: The Oracle Management Agent software is not installed on any of the cluster nodes
35 10:42:52 > FS-10998:
36 10:42:52 > FS-10651: Verifying the Oracle Application Server resource
37 10:42:52 >> FS-10665: Checking DLLs for resource provider
38 10:42:52 >> FS-10667: Checking for software installation
39 10:42:52 ** WARNING : FS-10658: The Oracle Application Server software is not installed on any of the cluster nodes
40 10:42:52 > FS-10998:
41 10:42:52 > FS-10651: Verifying the Oracle Database resource
42 10:42:52 >> FS-10665: Checking DLLs for resource provider
43 10:42:52 >> FS-10666: Checking for MSCS resource DLLs provided by Oracle
44 10:42:52 >> FS-10667: Checking for software installation
45 10:42:52 >>> FS-10652: CZVSOR1 has Oracle Database version 10.2.0 installed in OraDb10g_Db
46 10:42:52 >>> FS-10652: CZVSOR3 has Oracle Database version 10.2.0 installed in OraDb10g_Db
47 10:42:52 >>> FS-10652: CZVSOR2 has Oracle Database version 10.2.0 installed in OraDb10g_Db
48 10:42:52 > FS-10998:
49 10:42:52 FS-10503: CZVSOR1 : Verifying the network configuration
50 10:42:52 > FS-10510: Public network on the cluster uses subnet 172.22.111.96
51 10:42:52 > FS-10510: Private network on the cluster uses subnet 192.168.32.0
52 10:42:52 > FS-10998:
53 10:42:52 > FS-10512: CZVSOR1 maps to 172.22.111.118, 192.168.32.1 on CZVSOR1
54 10:42:52 > FS-10512: CZVSOR1 maps to 172.22.111.118 on CZVSOR3
55 10:42:52 > FS-10512: CZVSOR1 maps to 172.22.111.118 on CZVSOR2
56 10:42:52 > FS-10998:
57 10:42:52 > FS-10512: CZVSOR3 maps to 172.22.111.120 on CZVSOR1
58 10:42:52 > FS-10512: CZVSOR3 maps to 172.22.111.120, 192.168.32.3 on CZVSOR3
59 10:42:52 > FS-10512: CZVSOR3 maps to 172.22.111.120 on CZVSOR2
60 10:42:52 > FS-10998:
61 10:42:52 > FS-10512: CZVSOR2 maps to 172.22.111.119 on CZVSOR1
62 10:42:52 > FS-10512: CZVSOR2 maps to 172.22.111.119 on CZVSOR3
63 10:42:52 > FS-10512: CZVSOR2 maps to 172.22.111.119, 192.168.32.2 on CZVSOR2
64 10:42:52 > FS-10998:
65 10:42:52 > FS-10512: CZVSOC02 maps to 172.22.111.115 on CZVSOR1
66 10:42:52 > FS-10512: CZVSOC02 maps to 172.22.111.115 on CZVSOR3
67 10:42:52 > FS-10512: CZVSOC02 maps to 172.22.111.115 on CZVSOR2
68 10:42:52 > FS-10998:
69 10:42:52 > FS-10512: CZVSOR03 maps to 172.22.111.117 on CZVSOR1
70 10:42:52 > FS-10512: CZVSOR03 maps to 172.22.111.117 on CZVSOR3
71 10:42:52 > FS-10512: CZVSOR03 maps to 172.22.111.117 on CZVSOR2
72 10:42:52 > FS-10998:
73 10:42:52 > FS-10512: CZVSOC01 maps to 172.22.111.116 on CZVSOR1
74 10:42:52 > FS-10512: CZVSOC01 maps to 172.22.111.116 on CZVSOR3
75 10:42:52 > FS-10512: CZVSOC01 maps to 172.22.111.116 on CZVSOR2
76 10:42:52 > FS-10998:
77 10:42:52 The clusterwide operation completed successfully, however, the server reported some warnings.
That seems to be ok!!
CZVSOR03 Name of Cluster
CZVSOR1/CZVSOR2/CZVSOR3 Name of Nodes
CZVSOC01 Name of first Oracle Group preferred node CZVSOR1
- works perfect -
CZVSOC02 Name of second Oracle Group on Node CZVSOR3
Following reported Problems by adding database to resource
ADD Resource to Group – Oracle Database
Versions: client = 3.3.3 server = 3.3.3 OS =
Operation: Adding resource "ORCFIBU" to group "Oracle Group 2"
Starting Time: Aug 08, 2007 13:21:28
Elapsed Time: 0 minutes, 31 seconds
1 13:21:28 Starting clusterwide operation
2 13:21:28 FS-10370: Adding the resource ORCFIBU to group Oracle Group 2
3 13:21:28 FS-10371: CZVSOR3 : Performing initialization processing
4 13:21:28 FS-10371: CZVSOR2 : Performing initialization processing
5 13:21:29 FS-10372: CZVSOR3 : Gathering resource owner information
6 13:21:29 FS-10372: CZVSOR2 : Gathering resource owner information
7 13:21:29 FS-10373: CZVSOR3 : Determining owner node of resource ORCFIBU
8 13:21:29 FS-10374: CZVSOR3 : Gathering cluster information needed to perform the specified operation
9 13:21:29 FS-10374: CZVSOR2 : Gathering cluster information needed to perform the specified operation
10 13:21:29 FS-10375: CZVSOR3 : Analyzing cluster information needed to perform the specified operation
11 13:21:29 >>> FS-10652: CZVSOR3 has Oracle Database version 10.2.0 installed in OraDb10g_Db
12 13:21:29 >>> FS-10652: CZVSOR2 has Oracle Database version 10.2.0 installed in OraDb10g_Db
13 13:21:29 FS-10376: CZVSOR3 : Starting configuration of resource ORCFIBU
14 13:21:29 FS-10378: CZVSOR3 : Preparing for configuration of resource ORCFIBU
15 13:21:29 FS-10380: CZVSOR3 : Configuring virtual server information for resource ORCFIBU
16 13:21:30 > FS-10496: Generating the Oracle Net migration plan for ORCFIBU
17 13:21:30 > FS-10490: Configuring the Oracle Net listener for ORCFIBU
18 13:21:30 >> FS-10600: Oracle Net configuration file updated: D:\ORACLE\PRODUCT\10.2.0\DB_1\NETWORK\ADMIN\LISTENER.ORA
19 13:21:30 >> FS-10606: Listener configuration updated in database parameter file: K:\ORCFIBU\initorcfibu.ora
20 13:21:37 >> FS-10605: Oracle Net listener Fslczvsoc02 created
21 13:21:39 >> FS-10602: Oracle Net listener FIBU_1 restarted
22 13:21:39 > FS-10491: Configuring the Oracle Net service name for ORCFIBU
23 13:21:39 >> FS-10600: Oracle Net configuration file updated: D:\ORACLE\PRODUCT\10.2.0\DB_1\NETWORK\ADMIN\TNSNAMES.ORA
24 13:21:39 FS-10381: CZVSOR3 : Creating the resource information for resource ORCFIBU
25 13:21:39 > FS-10424: Checking whether the database ORCFIBU is online
26 13:21:55 > FS-10425: Querying the disks used by the database ORCFIBU
27 13:21:56 ** ERROR : FS-10034: Error while querying for disks used by database instance ORCFIBU
28 13:21:56 ** ERROR : FS-10778: The Oracle Database resource provider failed to configure the cluster resource ORCFIBU
29 13:21:56 ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
30 13:21:56 ** ERROR : FS-10497: Starting clusterwide rollback of the operation
31 13:21:56 FS-10488: CZVSOR3 : Starting rollback of operation
32 13:21:56 > FS-10090: Rolling back Oracle Net changes on node CZVSOR3
33 13:21:59 FS-10489: CZVSOR3 : Completed rollback of operation
34 13:21:59 ** ERROR : FS-10495: Clusterwide rollback of the operation has been completed
35 13:21:59 Please check your Windows Application log using the Event Viewer for any additional errors
36 13:21:59 The clusterwide operation failed !
ANY IDEAS WHATS WRONG????????
Group has 2 SAN DEVICES K and L which i can move without any problems to node czvsor2 and back - but without the database.
Normally my First node CZVSOR1 with Oracle Group CZVSOC01 on it is not involved for i removed this node from the available nodes list in my new group CZVSOC2
DO i have to make K an L available from Node 1 CZVSOR1 ????
General Question is it possible to have a 3 node Cluster with the following Configuration
Node1 with Oracle Group 1 and database 1 managed to failover to node2
Node3 with oracle Group 2 and database 2 managed to failover to node 2
PLEASE I NEED URGENT HELP
MANY MANY THANKS TO ALL!
Joachim

Yes, but yet not find a solution.
we restarted the installation from scratch and now we are at the phase of the database instance.
We noticed the following during the configuration of the first MSCS node :
at the time where sapinst creates the sap cluster group, we get the error:
"could not create sap cluster group. Please look at R3Clus.log"
Behind it appears a screen where we are prompted to add manually the values. We added manually the values and then the sap cluster group was succesfully created and the configuration of the first MSCS node finished without reporting errors.
But we noticed that although the SAPLOC share is normaly created in HA installation through ASCS installation and automatically removed when processing First MSCS Node, it was not removed at our case.
We would like to know if the whole above symptom is normal or we must
expect problems at the continuing of the installation of ECC6?
If it is not normal what else we can do, so that sapinst do not
stop at the creation of the sap cluster group ?

MS Cluster & Oracle FailSafe problem

Hi there,
We are using MS Cluster with Oracle FailSafe 3.3.4 on a 2 node cluster.
1 database instance on each of the 2 nodes configured as active/active.
When I stop the MS Cluster service for SAN disk maintenance, the 2 databases are shutdown automatically.
But when MS Cluster service is started up, in Windows Service on both nodes shows that the Oracle listener and Database instance are started.
However, in actual fact, when I try to connect to the database is says that the instance is not started.
When I check the alert logfile, there is no entry where the database is started when MS Cluster service is started.
Is there any additional configuration settings which I need to do on MS Cluster or Oracle FailSafe?
The only way to startup both the listener and database on the 2 nodes is to startup manually.
All the Oracle listeners and Database + disks + network IP are already assigned as resources in their individual cluster group.
In FailSafe manager or MS Cluster admin, I can offline and online the resource group for both nodes. But still, in Windows services, they appear started while in actual fact I still need to start them up manually.
Appreciate any advise.
Cheers
Jim
Message was edited by:
user448006

Hi Tiburon,
no you don't need MSDTC as a resource in the cluster group. I have a similar configuration and following Cluster ressources in my Cluster Group
- Cluster IP Adress
- Cluster Name
- Disk Q (Quorum Disk)
- Oracle Services for MSCS
nothing else in the Cluster Group
Contents of my Oracle Group are
- Disk F
- Disk G
- Disk H
- Disk I
- some more disks all on SAN
- Oracle IP
- Oracle Name
- OracleOraDb10g_DbTNSListenerFslczvsoc01
- ORC1 (Database)
everything works perfect
May be that helps a little
Joachim

How to make a full import into database under Oracle Failsafe v3.3.3?

Hi, my database(9.2.0.1) was implemented on OFS (3.3.3), When i try to startup the database, there were some error occurred -- "ORA-368 signalled during: alter database open..." and the database instance shutdown.
I have a newly full database export, what should I do to successfully bring my database back? Any commands are appreciated!

Hi, The following brief steps was what I had done yesterday to restore my corrupted database.
1. Remove the corrupted DB from OFS manager
2. Copy all the database files via OS command
3. Delete the corrupted DB via DBCA
4. Create new database via DBCA
5. Add new database to Oracle Failsafe via OFS Manager
(1) Discover Standalone database
(2) Add the standalone database to Resource Group
6. Import the exported dump file to the new database.
Regards
Webster

Error when upgrading Oracle Identity Manager 9.1.0.1 to OIM 9.1.0.2

Hello friends,
I upgraded Oracle Identity Manager 9.1.0.1 to Oracle Identity Manager 9.1.0.2,after the running the command to apply the patch:
OIM_HOME/xellerate/setup/patch_weblogic.cmd/sh WEBLOGIC_ADMIN_PASSWORD OIM_DB_USER_PASSWORD
I get the error:
[wldeploy] [BasicOperation.execute():445] : Initiating deploy operation for app, Xellerate, on targets:
[wldeploy] [BasicOperation.execute():447] : AdminServer
[wldeploy] Task 2 initiated: [Deployer:149026]deploy application Xellerate on AdminServer.
[wldeploy] dumping Exception stack
[wldeploy] Task 2 failed: [Deployer:149026]deploy application Xellerate on AdminServer.
[wldeploy] Target state: deploy failed on Server AdminServer
[wldeploy]
[wldeploy]
[wldeploy] There are 2 nested errors:
[wldeploy]
[wldeploy] weblogic.ejb.container.compliance.ComplianceException: In EJB tcGroupOperations, method getMemberGroups(long,int,int,java.lang.String,boolean) defined in the remote interface either does not exist in the bean class, or it is not a public method. Each method in the remote interface must have a corresponding public method in the bean class.
[wldeploy] and
[wldeploy]
[wldeploy] weblogic.ejb.container.compliance.ComplianceException: In EJB tcGroupOperations, method getMemberGroups(long,int,int,java.lang.String,boolean) defined in the local interface either does not exist in the bean class, or it is not a public method. Each method in the local interface must have a corresponding public method in the bean class.
[wldeploy] Target Assignments:
[wldeploy] + Xellerate AdminServer
[wldeploy] weblogic.deploy.api.tools.deployer.DeployerException: Task 2 failed: [Deployer:149026]deploy application Xellerate on AdminServer.
[wldeploy] Target state: deploy failed on Server AdminServer
[wldeploy]
[wldeploy]
[wldeploy] There are 2 nested errors:
[wldeploy]
[wldeploy] weblogic.ejb.container.compliance.ComplianceException: In EJB tcGroupOperations, method getMemberGroups(long,int,int,java.lang.String,boolean) defined in the remote interface either does not exist in the bean class, or it is not a public method. Each method in the remote interface must have a corresponding public method in the bean class.
[wldeploy] and
[wldeploy]
[wldeploy] weblogic.ejb.container.compliance.ComplianceException: In EJB tcGroupOperations, method getMemberGroups(long,int,int,java.lang.String,boolean) defined in the local interface either does not exist in the bean class, or it is not a public method. Each method in the local interface must have a corresponding public method in the bean class.
[wldeploy] [ServerConnectionImpl.close():332] : Closing DM connection
[wldeploy] [ServerConnectionImpl.close():352] : Unregistered all listeners
[wldeploy] [ServerConnectionImpl.closeJMX():372] : Closed JMX connection
[wldeploy] [ServerConnectionImpl.closeJMX():384] : Closed Runtime JMX connection
[wldeploy] [ServerConnectionImpl.closeJMX():396] : Closed Edit JMX connection
[ant] Exiting C:\oracle\xellerate\setup\weblogic-setup.xml.
BUILD FAILED
C:\oracle\xellerate\Setup\setup.xml:448: The following error occurred while executing this line:
C:\oracle\xellerate\setup\weblogic-setup.xml:310: weblogic.Deployer$DeployerException: weblogic.deploy.api.tools.deployer.DeployerException: Task 2 failed: [Deployer:149026]deploy application Xellerate on AdminServer.
Target state: deploy failed on Server AdminServer
There are 2 nested errors:
weblogic.ejb.container.compliance.ComplianceException: In EJB tcGroupOperations, method getMemberGroups(long,int,int,java.lang.String,boolean) defined in the remote interface either does not exist in the bean class, or it is not a public method. Each method in the remote interface must have a corresponding public method in the bean class.
and
weblogic.ejb.container.compliance.ComplianceException: In EJB tcGroupOperations, method getMemberGroups(long,int,int,java.lang.String,boolean) defined in the local interface either does not exist in the bean class, or it is not a public method. Each method in the local interface must have a corresponding public method in the bean class.
Caused by: C:\oracle\xellerate\setup\weblogic-setup.xml:310: weblogic.Deployer$DeployerException: weblogic.deploy.api.tools.deployer.DeployerException: Task 2 failed: [Deployer:149026]deploy application Xellerate on AdminServer.
Target state: deploy failed on Server AdminServer
There are 2 nested errors:
weblogic.ejb.container.compliance.ComplianceException: In EJB tcGroupOperations, method getMemberGroups(long,int,int,java.lang.String,boolean) defined in the remote interface either does not exist in the bean class, or it is not a public method. Each method in the remote interface must have a corresponding public method in the bean class.
and
weblogic.ejb.container.compliance.ComplianceException: In EJB tcGroupOperations, method getMemberGroups(long,int,int,java.lang.String,boolean) defined in the local interface either does not exist in the bean class, or it is not a public method. Each method in the local interface must have a corresponding public method in the bean class.
Caused by: weblogic.Deployer$DeployerException: weblogic.deploy.api.tools.deployer.DeployerException: Task 2 failed: [Deployer:149026]deploy application Xellerate on AdminServer.
Target state: deploy failed on Server AdminServer
There are 2 nested errors:
weblogic.ejb.container.compliance.ComplianceException: In EJB tcGroupOperations, method getMemberGroups(long,int,int,java.lang.String,boolean) defined in the remote interface either does not exist in the bean class, or it is not a public method. Each method in the remote interface must have a corresponding public method in the bean class.
and
weblogic.ejb.container.compliance.ComplianceException: In EJB tcGroupOperations, method getMemberGroups(long,int,int,java.lang.String,boolean) defined in the local interface either does not exist in the bean class, or it is not a public method. Each method in the local interface must have a corresponding public method in the bean class.
Caused by: weblogic.deploy.api.tools.deployer.DeployerException: Task 2 failed: [Deployer:149026]deploy application Xellerate on AdminServer.
Target state: deploy failed on Server AdminServer
There are 2 nested errors:
weblogic.ejb.container.compliance.ComplianceException: In EJB tcGroupOperations, method getMemberGroups(long,int,int,java.lang.String,boolean) defined in the remote interface either does not exist in the bean class, or it is not a public method. Each method in the remote interface must have a corresponding public method in the bean class.
and
weblogic.ejb.container.compliance.ComplianceException: In EJB tcGroupOperations, method getMemberGroups(long,int,int,java.lang.String,boolean) defined in the local interface either does not exist in the bean class, or it is not a public method. Each method in the local interface must have a corresponding public method in the bean class.
--- Nested Exception ---
C:\oracle\xellerate\setup\weblogic-setup.xml:310: weblogic.Deployer$DeployerException: weblogic.deploy.api.tools.deployer.DeployerException: Task 2 failed: [Deployer:149026]deploy application Xellerate on AdminServer.
Target state: deploy failed on Server AdminServer
There are 2 nested errors:
weblogic.ejb.container.compliance.ComplianceException: In EJB tcGroupOperations, method getMemberGroups(long,int,int,java.lang.String,boolean) defined in the remote interface either does not exist in the bean class, or it is not a public method. Each method in the remote interface must have a corresponding public method in the bean class.
and
weblogic.ejb.container.compliance.ComplianceException: In EJB tcGroupOperations, method getMemberGroups(long,int,int,java.lang.String,boolean) defined in the local interface either does not exist in the bean class, or it is not a public method. Each method in the local interface must have a corresponding public method in the bean class.
Caused by: weblogic.Deployer$DeployerException: weblogic.deploy.api.tools.deployer.DeployerException: Task 2 failed: [Deployer:149026]deploy application Xellerate on AdminServer.
Target state: deploy failed on Server AdminServer
There are 2 nested errors:
weblogic.ejb.container.compliance.ComplianceException: In EJB tcGroupOperations, method getMemberGroups(long,int,int,java.lang.String,boolean) defined in the remote interface either does not exist in the bean class, or it is not a public method. Each method in the remote interface must have a corresponding public method in the bean class.
and
weblogic.ejb.container.compliance.ComplianceException: In EJB tcGroupOperations, method getMemberGroups(long,int,int,java.lang.String,boolean) defined in the local interface either does not exist in the bean class, or it is not a public method. Each method in the local interface must have a corresponding public method in the bean class.
Caused by: weblogic.deploy.api.tools.deployer.DeployerException: Task 2 failed: [Deployer:149026]deploy application Xellerate on AdminServer.
Target state: deploy failed on Server AdminServer
There are 2 nested errors:
weblogic.ejb.container.compliance.ComplianceException: In EJB tcGroupOperations, method getMemberGroups(long,int,int,java.lang.String,boolean) defined in the remote interface either does not exist in the bean class, or it is not a public method. Each method in the remote interface must have a corresponding public method in the bean class.
and
weblogic.ejb.container.compliance.ComplianceException: In EJB tcGroupOperations, method getMemberGroups(long,int,int,java.lang.String,boolean) defined in the local interface either does not exist in the bean class, or it is not a public method. Each method in the local interface must have a corresponding public method in the bean class.
--- Nested Exception ---
weblogic.Deployer$DeployerException: weblogic.deploy.api.tools.deployer.DeployerException: Task 2 failed: [Deployer:149026]deploy application Xellerate on AdminServer.
Target state: deploy failed on Server AdminServer
There are 2 nested errors:
weblogic.ejb.container.compliance.ComplianceException: In EJB tcGroupOperations, method getMemberGroups(long,int,int,java.lang.String,boolean) defined in the remote interface either does not exist in the bean class, or it is not a public method. Each method in the remote interface must have a corresponding public method in the bean class.
and
weblogic.ejb.container.compliance.ComplianceException: In EJB tcGroupOperations, method getMemberGroups(long,int,int,java.lang.String,boolean) defined in the local interface either does not exist in the bean class, or it is not a public method. Each method in the local interface must have a corresponding public method in the bean class.
Caused by: weblogic.deploy.api.tools.deployer.DeployerException: Task 2 failed: [Deployer:149026]deploy application Xellerate on AdminServer.
Target state: deploy failed on Server AdminServer
There are 2 nested errors:
weblogic.ejb.container.compliance.ComplianceException: In EJB tcGroupOperations, method getMemberGroups(long,int,int,java.lang.String,boolean) defined in the remote interface either does not exist in the bean class, or it is not a public method. Each method in the remote interface must have a corresponding public method in the bean class.
and
weblogic.ejb.container.compliance.ComplianceException: In EJB tcGroupOperations, method getMemberGroups(long,int,int,java.lang.String,boolean) defined in the local interface either does not exist in the bean class, or it is not a public method. Each method in the local interface must have a corresponding public method in the bean class.
Total time: 4 minutes 35 seconds
How do I deal with this question?
Thanks.

This error generally occur if your server is up and you are running patch for upgrade, and its very common error.
follow the troubleshoot step and get it done.
page 36
Troubleshooting the Application of the Patch on Oracle WebLogic Server
http://docs.oracle.com/cd/E14899_01/doc.9102/e14764.pdf

Creation of PO's from Oracle Order Management

Required Business Scenario
Customer orders are received via the internet and imported into Oracle Order Management via an open interface table. The customer orders are processed by Oracle OM and converted to Purchase Orders which are then sent to suppliers (as no stock is held at our site). Goods are then shipped directly to the customer by the supplier. We take a commission for the service offered.
Problem
As we take a commission for the service described above, the value of the Purchase Order will be different to the value of the original order received via Order Management, however Oracle Purchasing does not allow you to place a Purchase Order on a percentage basis terms. (we will take a small commission as a percentage of the value of the original order meaning the value of the Purchase Order will be slightly less than the value of the original order). The following scenario attempts to explain the situation:
Order received via Oracle Order Management
5 units @ $20 = $100
Purchase Order created from above order (required scenario)
5 units @ $19.70 = $ 98.5
Our commission @ 1.5% = $ 1.5
Has anyone encountered this scenario before? If so I would appreciate assistance in how to resolve this issue. How can we create a Purchase Order from the order received via Order Management which will have a different value and allows us to take a percentage as commission?
Thanks
null

I came across your email on Oracle AppsNet. My company has the
exact same requirement. Did you ever receive any replys related
to this issue? If so would you be so kind as to forward them to
me? Thanks.
Required Business Scenario>Customer orders are received via the internet and imported into Oracle Order Management via an open
interface table. The customer orders are processed by Oracle OM
and converted to Purchase Orders which are then sent to
suppliers (as no stock is held at our site). Goods are then
shipped directly to the customer by the supplier. We take a
commission for the service offered. >Problem >As we take a
commission for the service described above, the value of the
Purchase Order will be different to the value of the original
order received via Order Management, however Oracle Purchasing
does not allow you to place a Purchase Order on a percentage
basis terms. (we will take a small commission as a percentage of
the value of the original order meaning the value of the
Purchase Order will be slightly less than the value of the
original order). The following scenario attempts to explain the
situation:>Order received via Oracle Order Management>5 units @
$20 = $100>Purchase Order created from above order (required
scenario)>5 units @ $19.70 = $ 98.5>Our commission @ 1.5% = $
1.5>Has anyone encountered this scenario before? If so I would
appreciate assistance in how to resolve this issue. How can we
create a Purchase Order from the order received via Order
Management which will have a different value and allows us to
take a percentage as commission?>Thanks >null

Unable to log-in in Oracle Identity Manager Design Console

Hello,
I successfully installed OIM9.1.0.1 Identity Manager on Jboss4.2.3.GA App server and could login to OIM using http://llocalhost:8080/xlWebApp on my window Server 2003 system without any problem.
Then I installed the Design Console on my window XP system. However, after successfully installing the Design Console, I could not login using the xelsysadm user ID.
I checked to make sure that xlconfig.xml contains the right URL file under oim_designConsole directories.
The error I get from the Design Console login window is:
Internal Login
Oracle Identity Manager Design Console Could not log you in.
In the dos-command window, I got the error:
WARN,22 Apr 2009 16:31:52,160,[org.jboss.remoting.marshal.MarshalFactory],Could
not find marshaller for data type 'invocation'. Object in collection is null
WARN,22 Apr 2009 16:31:52,160,[org.jboss.remoting.marshal.MarshalFactory],Found
marshaller fully qualified class name within locator parameters, but was unable
to load class: org.jboss.invocation.unified.marshall.InvocationMarshaller
WARN,22 Apr 2009 16:31:52,160,[org.jboss.remoting.marshal.MarshalFactory],Could
not find marshaller for data type 'invocation'. Object in collection is null
java.lang.reflect.UndeclaredThrowableException
at $Proxy0.create(Unknown Source)
at com.thortech.xl.dataaccess.tcDataBaseClient$1.run(Unknown Source)
at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source
at com.thortech.xl.dataaccess.tcDataBaseClient.bindToInstance(Unknown So
urce)
at com.thortech.xl.dataaccess.tcDataBaseClient.<init>(Unknown Source)
at com.thortech.xl.server.tcDataBaseClient.<init>(Unknown Source)
at com.thortech.xl.client.dataobj.tcDataBaseClient.<init>(Unknown Source
at com.thortech.xl.client.base.tcAppWindow.internalLogin(Unknown Source)
at com.thortech.xl.client.base.tcAppWindow.login(Unknown Source)
at com.thortech.xl.client.base.tcAppWindow.<init>(Unknown Source)
at com.thortech.xl.client.base.tcAppWindow.main(Unknown Source)
Caused by: org.jboss.remoting.marshal.InvalidMarshallingResource: Can not find a
valid marshaller for data type: invocation
at org.jboss.remoting.RemoteClientInvoker.invoke(RemoteClientInvoker.jav
a:78)
at org.jboss.remoting.Client.invoke(Client.java:226)
at org.jboss.remoting.Client.invoke(Client.java:189)
at org.jboss.invocation.unified.interfaces.UnifiedInvokerProxy.invoke(Un
ifiedInvokerProxy.java:184)
at org.jboss.invocation.InvokerInterceptor.invokeInvoker(InvokerIntercep
tor.java:227)
at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.jav
a:167)
at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.
java:46)
at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:5
5)
at org.jboss.proxy.ejb.HomeInterceptor.invoke(HomeInterceptor.java:169)
at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:86)
I would really appreciate your help in this regards.
Thanks for helping me resolve this issue.
Regards,
Dhirendra

vBackup the original file log4j-1.2.8.jar in oimclient/xlclient/ext
copy the log4j.jar from JBOSS folder - JBOSS/server/default
Paste the file in client folder with original log4j-1.2.8.jar
Rename log4j.jar file to log4j-1.2.8.jar
start ur JBOSS.. this shd work.

Unable to import the user certificate into the Oracle Wallet Manager

Hi,
I am configuring the External Authentication plugin using the password filters.
i am using the version 10.1.0.5.0 version of Oracle Wallet manager
inorder to do that i am enabling the SSL mode.
to enable the SSL mode i followed the some steps in OWM and OCA admin and user console.
when i approved a certificate as admin and importing to the Oracle Wallet Manager, i got an error that
User Certificate Installation failed.
Possible errors:
- Input was not a valid certificate
- No matching certificate request found
- CA certificate needed for certificate chain not found.
Please install it first
can anyone help me how to resolve this problem.

hi,
thanks for your reply pramod
I tried to import the two certificate files(rootca.crt and server.crt). but i am got the same error.
what may be the problem.

Oracle Failsafe Manager

Similar Messages

Maybe you are looking for