Oracle Files in https mode

Hi
We have a webdav oracle files instance running in http mode.
how can it be switched / configured to run in https mode ?
Thanks in advance

The pros and cons can be found at a far more easily visible level than getting into fibres versus threads.
1. Put antivirus software on the Windows server and performance will become glacial
2. In testing in my lab, without antivirus software, Oracle Enterprise Linux gives superior performance too all versions of Windows except 2008 Server.

Similar Messages

  • Reports Server - enable https mode

    I'm using Oracle 11G. I want to access Oracle reports using https mode.
    What are the configuration changes i need to make for this

    Hello,
    There is nothing special to do in Reports.
    The modifications are related to the HTTP Server (OHS)
    Regards

  • ORA-19602: cannot backup or copy active file in NOARCHIVELOG mode

    Hi All
    Its my first time to use RMAN in our ERP EBSR12
    our database version is 11g
    Please help how to resolv and make successfully backup
    RMAN> backup database;
    Starting backup at 24-JAN-11
    using channel ORA_DISK_1
    channel ORA_DISK_1: starting full datafile backup set
    channel ORA_DISK_1: specifying datafile(s) in backup set
    RMAN-03009: failure of backup command on ORA_DISK_1 channel at 01/24/2011 11:18: 25
    ORA-19602: cannot backup or copy active file in NOARCHIVELOG mode
    continuing other job steps, job failed will not be re-run
    channel ORA_DISK_1: starting full datafile backup set
    channel ORA_DISK_1: specifying datafile(s) in backup set
    including current control file in backup set
    channel ORA_DISK_1: starting piece 1 at 24-JAN-11
    channel ORA_DISK_1: finished piece 1 at 24-JAN-11
    piece handle=/oracle/mybackup_db/PROD2/backupset/2011_01_24/o1_mf_ncnnf_TAG20110 124T111824_6msvw4cv_.bkp tag=TAG20110124T111824 comment=NONE
    channel ORA_DISK_1: backup set complete, elapsed time: 00:00:03
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03009: failure of backup command on ORA_DISK_1 channel at 01/24/2011 11:18: 25
    ORA-19602: cannot backup or copy active file in NOARCHIVELOG mode
    RMAN>
    Thanks

    ORA-19602: cannot backup or copy active file in NOARCHIVELOG modeIs your database in archivelog or noarchivelog mode?
    How to Turn Archiving ON and OFF [ID 69739.1]
    Please also see these docs/links.
    ORA-19602 Using RMAN to Backup Database [ID 246183.1]
    COLD RMAN backup fails: Ora-19602 even after SHUTDOWN IMMEDIATE and STARTUP MOUNT [ID 373828.1]
    Backup & Recovery
    http://www.oracle.com/pls/db112/portal.portal_db?selected=14&frame=#backup_and_recovery
    Thanks,
    Hussein

  • Unable to open jsp file in Design mode

    Hi,
    I am unable to open jsp files in design mode, I am using eclipse Version: 3.6.1.
    Please help.
    Regards,
    Ale Hasan

    Hi Ale,
    Thank you for the additional information. Unfortunately, there does not seem to be anything unusual about your project based on your description. I'm surprised you don't see any processes listed in the process view while waiting for the page to open. I thought you might see something related to a queue manager job to "Manage Resource Event Jobs".
    Are there any messages in the error.log? You can open a view to the error log from the menu option, "Window -> Show View -> Error Log". I'm curious if there are any messages about a process timing out, unable to reset some object within a certain time, or any exceptions logged.
    If you change to another workspace with just a single JSF web project containing a smaller number of JSP, do you experience the same behavior?
    Can you also try using a more recent release of OEPE to see if that helps? The 11.1.1.6.1 release is about a year old.
    http://www.oracle.com/technetwork/developer-tools/eclipse/downloads/index.html
    Kind regards,
    Carlin

  • JInititiator 1.3.1.22 and Internet Explorer 7.0 in HTTPS Mode Not Working

    Anyone else having problems running Jinitiator 1.3.1.22 in Internet Explorer 7.0 in HTTPS mode? I'm getting the usual unhelpful java.lang.ClassNotFoundException:oracle.forms.engine.Main error.
    Works okay in HTTP mode. Confirmed that JInititiator and the certdb.txt file were okay by connecting successfully with IE 6.0 in HTTPS.

    Thank you for a very informative response.
    I installed 1.3.1.26 and get the same error when trying to connect to Forms in HTTPS mode.
    I also verified I can download the frmall.jar file directly from the server.
    Here's what I found in the OHS access log:
    192.168.1.1 - - [14/Nov/2006:16:01:55 -0600] "GET /forms/lservlet HTTP/1.1" 200 223
    192.168.1.1 - - [14/Nov/2006:16:02:04 -0600] "GET /forms/frmservlet?ok=OK+to+continue HTTP/1.1" 200 3931
    192.168.1.1 - - [14/Nov/2006:16:02:04 -0600] "GET /forms/java/frmall_jinit.jar HTTP/1.1" 200 1188684
    192.168.1.1 - - [14/Nov/2006:16:02:29 -0600] "GET /forms/java/java/awt/KeyboardFocusManager.class HTTP/1.1" 404 381
    192.168.1.1 - - [14/Nov/2006:16:02:29 -0600] "GET /forms/java/java/awt/KeyboardFocusManager.class HTTP/1.1" 404 381
    192.168.1.1 - - [14/Nov/2006:16:02:30 -0600] "GET /forms/java/java/awt/event/MouseWheelListener.class HTTP/1.1" 404 385
    192.168.1.1 - - [14/Nov/2006:16:02:30 -0600] "GET /forms/java/java/awt/event/MouseWheelListener.class HTTP/1.1" 404 385
    192.168.1.1 - - [14/Nov/2006:16:02:30 -0600] "GET /forms/java/oracle/forms/registry/Registry.dat HTTP/1.1" 200 4216
    192.168.1.1 - - [14/Nov/2006:16:02:30 -0600] "GET /forms/java/oracle/forms/registry/default.dat HTTP/1.1" 404 379
    Here's the corresponding entries from the OHS error log:
    [Tue Nov 14 16:02:29 2006] [error] [client 192.168.1.1] [ecid: 4760584573966,1] File does not exist: c:/oracle/mid1012/forms/java/java/awt/KeyboardFocusManager.class
    [Tue Nov 14 16:02:29 2006] [error] [client 192.168.1.1] [ecid: 4777764443166,1] File does not exist: c:/oracle/mid1012/forms/java/java/awt/KeyboardFocusManager.class
    [Tue Nov 14 16:02:30 2006] [error] [client 192.168.1.1] [ecid: 4760584573982,1] File does not exist: c:/oracle/mid1012/forms/java/java/awt/event/MouseWheelListener.class
    [Tue Nov 14 16:02:30 2006] [error] [client 192.168.1.1] [ecid: 4794944313801,1] File does not exist: c:/oracle/mid1012/forms/java/java/awt/event/MouseWheelListener.class
    [Tue Nov 14 16:02:30 2006] [error] [client 192.168.1.1] [ecid: 4812124183473,1] File does not exist: c:/oracle/mid1012/forms/java/oracle/forms/registry/default.dat
    Again, I can connect via HTTP mode. This only occurs when connecting via HTTPS.
    Unfortunately, our customers must use HTTPS mode and I fear they will be forced to upgrade to IE7 within the next month.
    Any suggestions you may have are most welcome. Thanks again for your quick response.
    Jim

  • FRM-92050 error when trying to open form after switching to HTTP mode

    Hi all,
    Yesterday, I installed Oracle Applications 11i on Red Hat Enterprise Linux ES 4 and forms were working correctly in the default mode, which is native (socket). Following steps 4 and 5 in [Doc 201340.1|https://metalink2.oracle.com/metalink/plsql/f?p=130:14:6398415066875997204::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,201340.1,1,1,1,helvetica], I enabled HTTP mode, and now my forms are not working. When I open a form now, I get this error:
    FRM-92050: Failed to connect to the Server: /forms/formservlet:-1
    Details...
    Java Exception:
    java.io.IOException: Negative content-length from http://...
    I've searched MetaLink and the forums for this error and all the results I found deal with HTTP headers or cookies being corrupted, usually by an intermediate networking device (web proxy, web cache, SSL accelerator, etc.). I am not using anything of the sort - the client is connecting directly to the Oracle server.
    I checked the Apache error log and this is what I see:
    [Thu May 14 09:10:28 2009] [error] [client 10.11.1.114] client denied by server configuration: /work/oracle/viscomn/java/java
    [Thu May 14 09:10:28 2009] [error] [client 10.11.1.114] client denied by server configuration: /work/oracle/viscomn/java/java
    [Thu May 14 09:10:33 2009] [error] [client 10.11.1.114] File does not exist: /work/oracle/viscomn/java/oracle/forms/icons/oracle_logo_light.gif
    [Thu May 14 09:10:33 2009] [error] [client 10.11.1.114] File does not exist: /work/oracle/viscomn/java/oracle/forms/icons/oracle_logo_light.gif
    [Thu May 14 09:10:34 2009] [error] [client 10.11.1.114] File does not exist: /work/oracle/viscomn/portal/VIS_gen1-cs49/forms/formservlet
    [Thu May 14 09:10:34 2009] [error] [client 10.11.1.114] client denied by server configuration: /work/oracle/viscomn/java/oracle/ewt
    [Thu May 14 09:10:34 2009] [error] [client 10.11.1.114] client denied by server configuration: /work/oracle/viscomn/java/oracle/ewt
    [Thu May 14 09:10:34 2009] [error] [client 10.11.1.114] File does not exist: /work/oracle/viscomn/java/oracle/ewt/alert/resource/AlertBundle_en_US.properties
    I don't like the look of those "client denied by server configuration" messages. What's also odd is that the two files referenced by those messages do not exist on the file system:
    [oracle@gen1-cs49 logs]$ cat /work/oracle/viscomn/java/java
    cat: /work/oracle/viscomn/java/java: No such file or directory
    [oracle@gen1-cs49 logs]$ cat /work/oracle/viscomn/java/oracle/ewt
    cat: /work/oracle/viscomn/java/oracle/ewt: No such file or directory
    Any ideas? Are there any other logfiles I should be checking?

    First, login to System Administrator responsibility, then navigate to Concurrent > Manager > Administer > Processes > Internal Manager LogAh, OK - I was able to open the form and I see a table of managers and services and whatnot, and I see an entry for "Internal Manager", but I don't see any way to view the log. I even tried opening the details of the "Internal Manager" entry and the only button there is "Diagnostics".
    Search for VIS_*.mgr -- Sorry for the typo!Ah, that would explain it. Here are the contents of the correct logfile:
    [oracle@gen1-cs49 VIS_gen1-cs49]$ cat VIS_0514.mgr
    ========================================================================
    Starting VIS_0514@VIS Internal Concurrent Manager -- shell process ID 4314
    logfile=/work/oracle/viscomn/admin/log/VIS_gen1-cs49/VIS_0514.mgr
    PRINTER=noprint
    mailto=oracle
    restart=N
    diag=N
    sleep=60 (default)
    pmon=20 (default)
    quesiz=1 (default)
    Routine &ROUTINE has attempted to start the internal concurrent manager. The ICM is already running. Contact you system administrator for further assistance.afpdlrq received an unsuccessful result from PL/SQL procedure or function FND_DCP.Request_Session_Lock.
    Routine FND_DCP.REQUEST_SESSION_LOCK received a result code of 1 from the call to DBMS_LOCK.Request.
    Possible DBMS_LOCK.Request resultCall to establish_icm failed
    The Internal Concurrent Manager has encountered an error.
    Review concurrent manager log file for more detailed information. : 14-MAY-2009 11:06:48 -
    Shutting down Internal Concurrent Manager : 14-MAY-2009 11:06:48
    List of errors encountered:
    _ 1 _
    Routine AFPCSQ encountered an ORACLE error. .
    Review your error messages for the cause of the error. (=<POINTER>)
    List of errors encountered:
    _ 1 _
    Routine AFPCAL received failure code while parsing or running your
    concurrent program CPMGR
    Review your concurrent request log file for more detailed information.
    Make sure you are passing arguments in the correct format.
    The VIS_0514@VIS internal concurrent manager has terminated with status 1 - giving up.

  • Open file in edit mode

    I need to open a file in edit mode. In my web part on item click I need to do some action before hand (like create a folder and copy file, then open it in edit mode).
    I came across the code segment below to set to a hyperlink's onClick() event
    <a onfocus="OnLink(this)"    href="/Shared Documents/myDoc.docx"    onmousedown="return VerifyHref(this,event,'1','SharePoint.OpenDocuments','')"        onclick="return DispEx(this,event,'TRUE','FALSE','FALSE',            'SharePoint.OpenDocuments.3','1', 'SharePoint.OpenDocuments',            '','','','1','0','0','0x7fffffffffffffff')">Click</a>
    But in my case, it would be nice if I can open in C# code behind, after the folder operations in my Visual web part.
    SPfile's file.OpenBinary() give a byte[], but was unable to open file.
    I am using a LinkButton for the user to click on. Any advise ?

    Hi Ahamed,
    I guess you need to undertake some action server side before you redirect the user. There are a number of different ways to do it ... maybe using a long running process with redirect at the end ... or some jQuery that calls a "handler" waits for a response
    and then redirects the user.
    For the code to duplicate or copy the file see here:
    http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.spfile.aspx
    if the existing code you have to open the document in edit mode works you should be able to reuse it.
    Thanks Chris

  • Corrupt file error while writting a file in compress mode

    Hello,
    I have a scenario where i am writting data in a file in appending mode with filter 'compress' addition using open dataset, on Al11 for the first set of records it works fine but if this file is accessed again for writting data in next select statement ( its between select endselect),the file is getting corrupted, if i try to open this file corrupt file error come. can someone help.
    Thanks and Regards,
    Gunjan

    Hi Gunjan,
    Unfortunately, you can't do in that way. The behaviour of that OPEN and FILTER 'compress' clause is to create a compacted file, to be read later, but it can be appended... all your writes go to a pipe and when you close the file this is sent to 'compress' program or other filter and than a compacted file is created.
    You can't go back and start inserting again after close it.
    Follow documentation:
    http://help.sap.com/abapdocu_70/en/ABAPOPEN_DATASET_OS_ADDITION.htm
    The addition FILTER must not be used together with the addition AT POSITION or for the access type FOR UPDATE.
    Regards, Fernando Da Ró

  • File-XI-HTTP Scenario with multipart

    Hello everyone,
    Argentina has a legal requirement which is necessary to send a TXT file containing data related to outbound delivery (transaction VL03N) in a website created by the government.
    Nowadays the users are using a HTML page to send this file. This HTML page has 3 parameters ( user, pass, file path+name ) and is sending data through "POST" method using encoding type "multipart". Please take a look on the statement below contained in the page:
    <FORM action="http://cot.ec.gba.gov.ar/Transporte.do" enctype="multipart/form-data" method="post" name="form" onSubmit="">     
    I am not expert in SAP XI, but I would like to convert all in an automatic process using XI:
    (SAP R/3) File -> XI -> HTTP.
    My question is: How could I configure a communication channel in order to send a TXT File to a HTTP service with all attributes mentioned right above (multipart, user + pass)? I think its necessary to use HTTP adapter but I am not sure.
    Best Regards
    Gabriel Santana

    Hello Gabriel Santana
    I have the same requerimient as you and i need some help. As you know the web service have 3 obligatoies parameters . User , password and File.
    I have no problems with the two first parameters passing them with the class
    cl_http_client method  ->request->set_form_field. and this values.
    However i cant pass the third parameter (File) using the same mode.
    i tried:
      CALL METHOD http_client->request->set_form_field
        EXPORTING
          name  = 'file'
          value =  'Path source of my file'.
    but i recive an error response from the web service .
    Hope you can help me with this issue because it turned to me to an Urgent matter.
    Thank you and will look forward for your answer.
    if you prefer my e-mail address is [email protected]
    Regards
    Mcol.

  • Error when creating Oracle12c PDB using DBCA response file in silent mode

    I am getting an Oracle dbca NullPointerException when trying to create a PDB (Pluggable Database) usingdbca response file in silent mode.
    I have a Oracle 12c CDB up and running, listener is also up, $ORACLE_HOME and $ORACLE_SID are also set correctly.
    After database install and creating CDB using response files, I am now trying to create a PDB using dbca response file. Contents of dbca.rsp -
    [GENERAL]
    RESPONSEFILE_VERSION = "12.1.0"
    OPERATION_TYPE = "createPluggableDatabase"
    [CREATEPLUGGABLEDATABASE]
    SOURCEDB = "orcl"
    PDBNAME = "dev"
    CREATEPDBFROM = "DEFAULT"
    PDBADMINUSERNAME = "oracle"
    PDBADMINPASSWORD = "oracle"
    CREATEUSERTABLESPACE = "true" 
    I tried following commands:
    dbca -silent -responseFile /<file path>/dbca.rsp dbca -silent -createPluggableDatabase -responseFile /<file path>/dbca.rsp
    Both give same error:
    ---- Begin output of /u01/app/oracle/product/12c/db_1/bin/dbca -silent -responseFile /<file path>/dbca.rsp
    STDOUT:
    STDERR: Exception in thread "main" java.lang.NullPointerException
    at oracle.sysman.assistants.dbca.backend.CommandLineArguments.processResponseFile(CommandLineArguments.java:6885)
    at oracle.sysman.assistants.dbca.backend.CommandLineArguments.process(CommandLineArguments.java:4544)
    at oracle.sysman.assistants.dbca.Dbca.execute(Dbca.java:110) at oracle.sysman.assistants.dbca.Dbca.main(Dbca.java:184)
    However when I pass exact same parameters as command line arguments, dbca works absolutely fine and PDB is created: Following command runs succefully.
    dbca -silent -createPluggableDatabase -sourceDB orcl -pdbName dev -createPDBFrom default -pdbAdminUserName oracle -pdbAdminPassword oracle -createUserTableSpace true
    My environment need installation using response files only. I had used a dbca response file with "createDatabase" option for CDB and it worked fine. Error is observed only when I run it with OPERATION_TYPE as "createPluggableDatabase".
    There is an option to create PDBs along with CDB creation when OPERATION_TYPE is "createDatabase". But Oracle does not give flexibility to name PDBs in this option. If I ask Oracle to create 3 PDBs, it will name them itself like PDB01, PDB02, PDB03 and so on. This doesn't work in my deployment because of applications compile time dependencies on specific PDB names.

    Yes, I am pointing to correct response file. I have two of these. One for "createDatabase" and another one for "createPluggableDatabase".
    While the first one works absolutely fine, the one which creates PDBs always gives error.
    I tried renaming the response file like dbca_dev.rsp for PDB install but same error message. I read in another forum that rename dbca.rsp is not a good idea.
    So I kept it as dbca.rsp but built it using PDB template.
    When I try after removing -silent, it tries to launch a UI installer. Since I am in Amazon AWS platform, my instance is CentOS based which doesn't support Xwindows display.
    I am stuck with -silent install only. When I try with -progressOnly, I get exactly same error.
    Also tried removing some parameters but still get exact same error message.
    Tried same trick with "createDatabase" response file, now I see parameters missing error message.
    It seems like Oracle doesn't like response file install for "createPluggableDatabase".

  • Forms 6i not working in HTTPS mode

    We have installed OAS 4.0.8.0
    We have downloaded the required certificates and installed them using the default Oracle documentation.
    We cannot display a form using the secure port (8881).
    Everything thing work with only the HTTP mode.
    Can anybody help please.
    null

    Assuming you connected to the running form successfully, it sounds like your breakpoint is not being called. In other words, if you put a breakpoint in a trigger that isn't firing then the break will never occur. A simple test would be to add a break in the WHEN-NEW-FORM-INSTANCE trigger. Since this trigger cannot be avoided, control will quickly be passed to the debugger at startup. If this works then you can assume what I mentioned, which is that your other breakpoints are not being reached.
    Just to be sure, I just tested the Debugger in Forms 11.1.2.1 on Windows and it appears to work correctly.

  • ClassNotFoundException: oracle.adf.share.http.ServletADFFilter

    We have recently started using ADF and I have been tasked with deploying it to a Apache Tomcat environment.
    I have a simple 'jspx' with a ADF Data Visualization graph on it, that I have deployed to my local tomcat env using the JDeveloper deployment package (WAR file). However, when tomcat tries to deploy/start the web page, I get the below exception. It would seem that I am missing some files in the deployment package or that Tomcat cannot find certain files. I have also run the ADFInstaller.jar and that completed successfully. Does anyone know what I have missed?, I've spent a lot of time googling but have not found anything that helps me.
    01-May-2009 13:35:28 org.apache.catalina.core.StandardContext filterStart
    SEVERE: Exception starting filter ServletADFFilter
    java.lang.ClassNotFoundException: oracle.adf.share.http.ServletADFFilter
         at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1387)
         at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1233)
         at org.apache.catalina.core.ApplicationFilterConfig.getFilter(ApplicationFilterConfig.java:249)
         at org.apache.catalina.core.ApplicationFilterConfig.setFilterDef(ApplicationFilterConfig.java:397)
         at org.apache.catalina.core.ApplicationFilterConfig.<init>(ApplicationFilterConfig.java:108)
         at org.apache.catalina.core.StandardContext.filterStart(StandardContext.java:3709)
         at org.apache.catalina.core.StandardContext.start(StandardContext.java:4363)
         at org.apache.catalina.manager.ManagerServlet.start(ManagerServlet.java:1247)
         at org.apache.catalina.manager.HTMLManagerServlet.start(HTMLManagerServlet.java:604)
         at org.apache.catalina.manager.HTMLManagerServlet.doGet(HTMLManagerServlet.java:129)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:617)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
         at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:525)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:845)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
         at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
         at java.lang.Thread.run(Unknown Source)
    01-May-2009 13:35:28 org.apache.catalina.core.StandardContext filterStart
    SEVERE: Exception starting filter trinidad
    java.lang.NoClassDefFoundError: javax/faces/context/ExternalContext
         at java.lang.Class.getDeclaredConstructors0(Native Method)
         at java.lang.Class.privateGetDeclaredConstructors(Unknown Source)
         at java.lang.Class.getConstructor0(Unknown Source)
         at java.lang.Class.newInstance0(Unknown Source)
         at java.lang.Class.newInstance(Unknown Source)
         at org.apache.myfaces.trinidad.webapp.TrinidadFilter.init(TrinidadFilter.java:53)
         at org.apache.catalina.core.ApplicationFilterConfig.getFilter(ApplicationFilterConfig.java:275)
         at org.apache.catalina.core.ApplicationFilterConfig.setFilterDef(ApplicationFilterConfig.java:397)
         at org.apache.catalina.core.ApplicationFilterConfig.<init>(ApplicationFilterConfig.java:108)
         at org.apache.catalina.core.StandardContext.filterStart(StandardContext.java:3709)
         at org.apache.catalina.core.StandardContext.start(StandardContext.java:4363)
         at org.apache.catalina.manager.ManagerServlet.start(ManagerServlet.java:1247)
         at org.apache.catalina.manager.HTMLManagerServlet.start(HTMLManagerServlet.java:604)
         at org.apache.catalina.manager.HTMLManagerServlet.doGet(HTMLManagerServlet.java:129)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:617)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
         at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:525)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:845)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
         at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
         at java.lang.Thread.run(Unknown Source)
    01-May-2009 13:35:28 org.apache.catalina.core.StandardContext listenerStop
    SEVERE: Exception sending context destroyed event to listener instance of class org.apache.myfaces.trinidadinternal.webapp.TrinidadListenerImpl
    java.lang.NoClassDefFoundError: javax/faces/context/ExternalContext
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadListenerImpl.contextDestroyed(TrinidadListenerImpl.java:39)
         at org.apache.catalina.core.StandardContext.listenerStop(StandardContext.java:3882)
         at org.apache.catalina.core.StandardContext.stop(StandardContext.java:4523)
         at org.apache.catalina.core.StandardContext.start(StandardContext.java:4387)
         at org.apache.catalina.manager.ManagerServlet.start(ManagerServlet.java:1247)
         at org.apache.catalina.manager.HTMLManagerServlet.start(HTMLManagerServlet.java:604)
         at org.apache.catalina.manager.HTMLManagerServlet.doGet(HTMLManagerServlet.java:129)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:617)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
         at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:525)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:845)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
         at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
         at java.lang.Thread.run(Unknown Source)

    Hi,
    this filter sets the ADF binding context. If you have the following setting in your web.xml file then this filter may not be needed at all
    <filter>
    <filter-name>adfBindings</filter-name>
    <filter-class>oracle.adf.model.servlet.ADFBindingFilter</filter-class>
    </filter>
    Frank

  • Forms with OC4J instance runs in http mode, Y?

    I don't want my forms to run in http mode - http://fulham:8889/forms/frmservlet.
    Can someone help in making me run it in forms itself
    I have Enterprise server 9i and forms 10g running on my local machine. At the initial stages, it says about about not being started. Ok, I had to simulate forms in run time by starting an OC4J instance but it now runs in http mode.
    Is there a way around this? Has anyone come across this?
    many thanks in advance
    cube60

    What's the alternative you're looking for?
    If it is HTTPS to secure the communication - yes that's possible
    If it's a plain socket connection in stead of HTTP - I think Oracle dropped that after version 6i, but I'm not 100% sure.
    If it is traditional client-server - Oracle dropped that after version 6i.
    So, please explain what is you want.

  • Oracle Mail webclient error and Oracle Files web error

    Having some problems with Collaboration.
    I've made a single-box installation on a Windows 2000 with SP4.
    The installation was successfully done.
    The problems that I have are listed below:
    1) Error in Oracle Mail webclient
    When accessing the Oracle Mail webclient, I'm getting the following messages:
    "Application Error. An error occurred during log in"
    then, when I click im "Mail", I get:
    "Application Error. Error occurred while refreshing folder list"
    I've tried the steps related in the 247517.1 document, but I'm still getting the same errors.
    On the Collaboration Suite start page (when user logs in), the user can see the Oracle Mail portlet whithout any problem:
    Welcome to Collaboration Suite Mail, USERID
    You have 0 message(s) in Inbox.
    0 unread message(s), 0 voice message(s), and 0 fax message(s).
    2) Oracle Files is not accessible in the HTTP page.
    I can access the Files by a FTP client, but when I try the http://host:port/files/app url, iget the 503 error message.
    I've seen a lot of messages about this here in Metalik, but none of them could solve my problem.
    Any Ideas?
    Thanks in advance.

    it's me again, just some more information.
    I've looked for error messages in the logs, and I've found this on ocs_onebox\mtier\um\log\Webmail_Client\563686183\text.log:
    (compclass Webmail_Client)(compinst 0)(component Webmail_Client)(module traffic_cop.init())(priority internal_error 1)(execid 127.0.0.1:563686183.ApplicationServerThread-7:1108563686-1)(msgid <null>)(mtext MSAAPI Logging Services initiated; log level ERROR))
    (compclass Webmail_Client)(compinst 0)(component Webmail_Client)(module RefreshUserPrefs.getAttributeStringValue())(priority error 6)(execid 127.0.0.1:563686183.ApplicationServerThread-7:1108563686-2)(msgid <null>)(mtext Attribute orclmailquota not an integer value; returning null))
    (compclass Webmail_Client)(compinst 0)(component Webmail_Client)(module MailLogin.process())(priority error 6)(execid 127.0.0.1:563686183.ApplicationServerThread-7:1108563686-3)(msgid <null>)(mtext Exception occurred during mail login: java.lang.NullPointerException))
    (compclass Webmail_Client)(compinst 0)(component Webmail_Client)(module traffic_cop.processRequest())(priority error 6)(execid 127.0.0.1:563686183.ApplicationServerThread-7:1108563686-4)(msgid <null>)(mtext Error caught during action; checking for logout flag))
    (compclass Webmail_Client)(compinst 0)(component Webmail_Client)(module RefreshFolderList.process())(priority error 6)(execid 127.0.0.1:563686183.ApplicationServerThread-7:1108563686-5)(msgid <null>)(mtext Exception caught: java.lang.NullPointerException))
    (compclass Webmail_Client)(compinst 0)(component Webmail_Client)(module traffic_cop.processRequest())(priority error 6)(execid 127.0.0.1:563686183.ApplicationServerThread-7:1108563686-6)(msgid <null>)(mtext Error caught during action; checking for logout flag))
    (compclass Webmail_Client)(compinst 0)(component Webmail_Client)(module RefreshFolderList.process())(priority error 6)(execid 127.0.0.1:563686183.ApplicationServerThread-7:1108563686-7)(msgid <null>)(mtext Exception caught: java.lang.NullPointerException))
    (compclass Webmail_Client)(compinst 0)(component Webmail_Client)(module traffic_cop.processRequest())(priority error 6)(execid 127.0.0.1:563686183.ApplicationServerThread-7:1108563686-8)(msgid <null>)(mtext Error caught during action; checking for logout flag))

  • Oracle Files

    Hello. I have read it somewhere that Oracle Files feature can be used as a standalone product without having to purchase the OCS. Is this possible?
    If so, are there any instructions on how to do this?

    You will need to login as the Subscriber Administrator. The username/password for this user was created when you created the subscriber and emailed you. Please login at http://host:port/files/app/AdminLogin and then click on the Users tab.
    -sancho

Maybe you are looking for