Oracle Financial 11.5.10.2 on Windows 2003 Installation Problem

When I install the Oracle Finanacial the Rapidwiz show the error
Oxcf9302f0 referenced memory at Oxcf9302f0. The memory could not be read.
and after this the error shown
RW-20013: Error: - Not enough free disk space on system:
Database ORACLE_HOME = e:\oracle\visdb\9.2.0
required = 2800.0
actual = 0.0
filespace.exe has shown error
While in Drive E: has 60 GB free space
What is the problem

Database ORACLE_HOME = e:\oracle\visdb\9.2.0
While in Drive E: has[b] 60 GB free spaceFor 11i, the total space required for a single node system, not including the stage area, is 57 GB for a fresh install with a production database, and 91 GB for a fresh install with a Vision Demo database.

Similar Messages

CF 9 on Windows 2003 installation problem

We've been trying to upgrade CF MX 7.02 (multiserver) to CF 9 on Windows 2003 and installation ended with 2 errors:
Install JRE:           C:\JRun4\jre
                           Status: ERROR
                           Additional Notes: ERROR - Error Copying the JRE to the destination directory
                                             ZeroGlq: Target file was read only or did not have write permissions and was not overwritten
Web Server Connector Configuration Error
                           Status: ERROR
                           Additional Notes: ERROR - JNDI port 2904 for server cfusion is not active
Now Windows can not start JRun CFusion service there at all.
The most weird thing is that we seem to be unable to uninstall what got installed of CF 9: [Remove] button in Add or Remove Programs does not do anything.
It works normally with the other programs but it would not remove CF 9.
The C://JRun4/Uninstall/Uninstall Cold Fusion 9.exe does not execute either while executables have been added into Control Panel -> System -> Advanced -> Performance -> Data Execution Prevention.
What would we do at this point?
Thank you!

Hi,
Sounds like you got trouble there and I worry suggestions on forum may not be the best or indeed on track.
I guess c:\jrun4 was the same folder that CF7 installed and perhaps CF7 did not uninstall well or upgrade well to what is now a broken CF9. So now your currently not functional at all I guess you can be brutal and apply forceful changes since you seem to be in place where you can not easily go forward or back. How about this?
-rename jrun4
-reboot
-install CF9 again to newly created jrun4 folder
That way you can keep your neo*.xml files to refer and hopefully have a working file set present with CF9 functional.
HTH, Carl.

Migrate Oracle EBS 12.1.3 from Microsoft Windows 2003 32-Bit to Linux

Hi
We are currently using Oracle EBS 12.1.3 on Microsoft Windows 2003 32-Bit. We are planning to migrate to linux. I have gone through the certification matrix and the following versions certified with Oracle EBS 12.1.3
1. Linux x86 Oracle Linux 5
2. Linux x86 Oracle Linux 4
3. Linux x86 Red Hat Enterprise Linux 5
4. Linux x86 SLES 10
Question #
1Q) I would like to know is there any linux freeware which is certified with Oracle EBS 12.1.3
2Q) Also please let me know which documents I need to follow to migrate Oracle EBS 12.1.3 from Microsoft Windows to Linux

1Q) I would like to know is there any linux freeware which is certified with Oracle EBS 12.1.3No.
2Q) Also please let me know which documents I need to follow to migrate Oracle EBS 12.1.3 from Microsoft Windows to LinuxApplication Tier Platform Migration with Oracle E-Business Suite Release 12 [ID 438086.1]
To migrate the database you can use export/import or transportable tablespaces -- Refer to these docs for details:
Export/Import Process for Oracle E-Business Suite Release 12 using 10gR2 [ID 454616.1]
Export/import process for R12 using 11gR1 or 11gR2 [ID 741818.1]
Using Transportable Database to migrate E-Business Suite R12 Using Oracle Database 10gR2 or 11g [ID 734763.1]
Thanks,
Hussein

Oracle Database 10.2.0.3 on Windows 2003 x64

We are looking to migrate our 2 Oracle database servers from old Windows Server 2003 machine to our new HP-G5 Windows Server 2003 64-bits. We're using ESX Server with Windows Server 2003 Virtual Machine and our 10.2.0.2 are running fine. Some months ago a consultant warned us from installing the 10.2.0.3 upgrade for some stability bugs on Windows Servers were to be found.
As the new CPU (Jan 2008) is not available for Windows Server 2003 64-bits for Oracle 10.2.0.2, I would like to upgrade from 10.2.0.2 to 10.2.0.3. I would like to apply these patches to our OAS too. Is anyone had exprience any issue with this kind of configuration ?
Configuration :
Database is on a Virtual Machine which we allow 4Gb RAM and a Quad Core.
Windows Server 2003 Enterprise 64-bits.
Our Application Servers 10.2.0.2 run on Windows 2003 32-bits.
We're still using Oracle Forms & Reports 10.1.2.0.2.
We also use Oracle Discoverer 10g.
We also use a failover system with EMC Legato.

Before proceeding with the Virtual Machine, I suggest you to refer to this Metalink Note> Certified Software on Oracle VM
Doc ID: Note:464754.1
This doesn't seem to be a supported platform, so if you ever find an issue after upgrade you may find your production system unsupported by Oracle.
~ Madrid

Oracle (Linux) to MS SQL Server 2000 (Windows 2003) with OTG

I have Oracle 9i Release 1 running on linux and i want to use Transparent Gateway to connect to MS SQL Server 2000 running on Windows 2003. Is it possible to setup this connection?
If yes, please include the detail approach of installation.
Thank you....

Dear kgronau
i tried the transperent gateway in Win2003
both sqlserver and oracle 10 g onthe same os (win2003)
Created listener and tnsname settings as per the documention spec..
then created a database link for sqlserver here.
my transpernet gateway works without any problem,
Then,
I have Oracle on Linux also,
i created a tnsname settings here for the win2003 listener (for sqlserver connection).
then created a database link for sqlserver here
im not able to connect sqlserver.
i tried to desc one table (sqlserver)
the following error i get,
do you have any idea, what i have missed???
SQL> DESC CUSTOMERS@SQLDB
ERROR:
ORA-02068: following severe error form SQLDB
ORA-03135: connection lost contact
please give some hints what is the problem
remember the listener is running on windows 2003
regards

Oracle HTTP Server download bandwidth limited on Windows 2003 Server

Hi,
we have an ApEx application with the following configuration on the server:
OS: Windows 2003 Server 64Bit
DB: 10.2.0.3 64bit
HTTP Server: the one that comes on the companion CD of Oracle DB 10g 32 bit
and after the bandwidth in the datacenter where the server resides was increased, I discovered a problem related to the server download bandwidth. I found on Metalink a Note [568075.1 - HTTP Server File Download Speed Is Slow |https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=568075.1] , but unfortunately not a very clear resolution given the fact that we use Oracle DB SEOne, so options 1 & 2 will involve additional licenses costs.
I tried option 3 suggested in the note by using the HTTP Server that comes with 11g (I assume this is a supported configuration also from licenses point of view HTTP Server from 11g on top of Oracle DB 10g) and I got a boost in performance but the bandwidth is still 70% compared to the bandwidth I get when downloading from the IIS on the same server.
Has anyone went through this exercise and found a solution for fully using the server bandwidth without needing to go for option 4 in the note, using Linux :), as in our case this will involve again additional licenses and/or hardware costs as the HTTP Server that comes with the DB has to be installed on the machine where the DB is installed?
Thanks in advance,
Florin

Ooops ... things like this happen with Oracle Support, no answer?
Can you tell me anyway the SR number or the SR title so that I can write it in the SR I make? Like that maybe Oracle Support will work harder on the case, as there are more customers hitting the same problem.
Anyway in the meanwhile, I run some tests with the original Apache and this one works like a charm even in Windows 2003 Server. What remains now to be done is to use the Open Source Apache as proxy to the HTTP Server, as it looks like it handles much better the static content, it supports also mod_gzip or mod_deflate, but does not support mod_plsql :(. So I think the combination of the two: will do the work for me, but it is really a pity that I have to configure 2 web servers because the HTTP Server has flaws in it :(. Hopefully these will be fixed soon

Oracle 10.2.0.1.0 on Windows 2003 AS

I have moved jobs and inherited the following database:
Oracle 10.2.0.1.0 EE on Windows 2003 AS EE.
There seem to be a number of issues on the server.
ORA-27300: Message 27300 not found. No message file for Product=RDBMS
ORA-12518: Listener could not hand off client connection
ORA-4030: signaled during : Create Bigfile tablespace....
As stated, the database is on Windows 2003 AS EE with 10Gb of Ram with PAE switch in the boot.ini.
SGA_target =1200M
PGA_AGGREGATE_TARGET=399M
Processes=2000
Dedicated connection.
After spotting these issues in the alert log, my first advice was upgrade to the latest patch set, because the memory settings appear to be fine & it's obviously good practice to be on the latest patch set. Has anyone had these issues before?
I suppose what I am asking is would you...
a: Log an SR? (I imagine I will be asked to patch)
b: Assume that I have hit some bug and patch to the latest release?
c: Try increasing the PGA_AGGREGATE TARGET and letting system set the pagefile size automatically?
Many thanks for your help,
Regards
User629216

a: Log an SR? (I imagine I will be asked to patch)When you are in doubt and not knowing where to start, contact Oracle support is logical choice. And following their advice is also logical choice.
b: Assume that I have hit some bug and patch to the
latest release?Since you are running maiden version of major release, apply patch is advised.
c: Try increasing the PGA_AGGREGATE TARGET and
letting system set the pagefile size automatically?
At this point it's hard to tell the problem anywhere related to pga_aggregate_target setting.
You should look into the errors you had,
ORA-27300: Message 27300 not found. No message file for Product=RDBMSthe actual error message is
ORA-27300: OS system dependent operation:string
failed with status: string Cause: OS system call errorIt looks like your Oracle installation has some problem. Or ORACLE_HOME is not properly set.
ORA-12518: Listener could not hand off client connectionCheck metalink
New Connections to the Database lead to ORA-12518 or TNS-12518
Doc ID: Note:340089.1

Login user id is invalid in oracle 11i apps 11.5.8 on windows 2003 server

Dear All,
I Installed oracle 11i apps 11.5.8 on windows server, when I try to start ie browser
with user administrator and password, it is showing me, user id is invalid, try to login in again.
and on the status bar down it is showing loginscript_logonsubmit().
I can login with sql+ as apps/apps.
Anybody can help me out.
Thanks in advance,
best regards,
Ather Hussain
[email protected]

your problem is not very unusual... I also faced the similar situation cpl of times when Oracle was not able to continue the installation coz the Immediate Shutdown was failed. Actually During the installation, Oracle mounts/opens the database and shuts it down many times and few times, Oracle is unable to shutdown cleanly as some process is hanging or not responding.
Piece of advise is that always use staging area to install Apps as it takes long time on Win2K (anything between 4-12 hrs) to install it and CDROM Access is lot slower than HDD. Also, it will prompt u every time to insert tbe CD. All this hassle can be bypassed by using the staging area. Read the Installation help document on how to create it.
For failure reasons, look in ur installation log file which is created in the default Temp folder usually C:\documents and settings\USERNAME\local settings\temp for WinXP or C:\winnt\documents and settings\USERNAME\local settings\temp for Win2K.
post or email me at [email protected] or [email protected] for further help/details.

Installation of Oracle 10g und 9i Database on one Windows 2003 Srv System

Hello,
I would like to install Oracle 9i and 10g database on the same server.
OS is Windows 2003 Server default.
I already read that i must do some adjustments (regarding ORACLE_HOME / SIDs ..)
anyone here who knows something about this ?
Thank you
Philip

Yep.
Install 9i and when it asks for a port to install the listener pick something other than 1521. (1522 should work).
Then the Oracle 10g installation should go without a hitch.
~Jer

Oracle discoverer 9i can not running at windows 2003 server

Hi, Please help me.
When I upgrade from windows 2000 advance server to windows 2003 server the oracle discoverer 9i can not be open. When I open it there is a error "Failed to open document"
How to make it run smoothly at windows 2003 server?
Thank You

Hi,
This is a bug in your version of Discoverer. There is a patch to make it work with windows 2003 or you can upgrade your Discoverer to a later version. The patch should be available from Oracle support. I don't know of anyway to make your version work with 2003.
Rod West

Oracle 10gR2 (10.2.0.1) on Windows 2003 Server

I have installed the above version on Windows 2003 Server(x64). Now we are planning on clustering the same for production environment. I would like to know the following.
1. Can std edition can be installed on this cluster?
2. If so, what are the components that has to be installed?
3. If only EE will work for clustering, we are not going to do RAC? what is the other source?
Any information/links for the above information is greatly appreciated.
Thank you in advance.

Dear,
You can go for OracleFS(failsafe). It is a Acive Passive clustering method unlike RAC.

Windows 7 Installation problem: "no drives were found, click to load driver..."

I just purchased a Toshiba Satellite laptop (U945-S4140) that came with windows 8. I am trying to install windows 7 enterprise 64 bit.
I have the installation file on a bootable USB stick. In order to boot from the USB, I have to go into the BIOS settings and change from UEFI to CSM boot mode. Then the computer will boot from the usb stick and the windows 7 installation begins to work fine.
However, I soon get an error message that "no drives were found. click to load driver to provide a mass storage driver for installation."
I cannot figure out how to proceed. Any help would be greatly appreciated.
Cheers

I have tried many solutions....Maybe I should provide more details on my options.
Through my university I am granted the rights & license to use a copy on windows enterprise. From them I obtained a valid product key and also downloaded an ISO install file. It seems as if this file was designed to be burned to a dvd. I used windows 7 usb/dvd tool to burn the ISO file to a DVD. No problem there. However, my new laptop does not have an optical drive. So, I borrowed an external one that plugs in via USB. Again, in order to get ANYTHING to happen, I need to boot the USB(dvd rive) in CSM mode. Even then, it doesn't work. (I'm sorry but I forget the specific error I got here.....there have been so many methods and so many errors today)
Now, with this DVD, I have had a little bit of progress if I click the setup.exe file while Windows 8 is running. It begins the Windows 7 setup program, and even sees the harddrive! It asks me what partition I want to install to, and I selected the only 1 (of 4) that it said was 'available' to write to. Then, it loaded the installation files, but when it went to automatically restart, it froze during the 'starting windows' screen just as the little colored circles appear, that eventually form the windows logo. Again, I think the problem here might have been that during the restart, it looked to the USB-DVD drive, which needs CSM mode to boot properly, but Windows 8 can only start in UEFI mode.
Any attempt to put this ISO file onto a USB stick have not worked well. I used Rufus and the only thing that slightly worked was burning the ISO to the USB stick with a 'GPT partition scheme for UEFI controller' with the 'FAT32' file system. When using this to boot, I did not have to change the BIOS to CSM mode. The screen for 'loading files' came up like the installer was going to work. However, the computer then froze during the 'Starting Windows' screen, however, this time the little circles actually were able to form the windows logo. But, at that point I was left with a pulsing windows logo and it was stuck. It did not even make it to the actual installer.
The situation I posted about originally is slightly different. Some tech guys at my department's electronic shop have a bootable USB stick with the windows 7 enterprise installation software already on it. I used that and was at least able to get a little bit into the windows 7 setup before it told me it cannot find a disk to install to (as in my original post).

Windows 7 Installation problem: "no drives were found, click to load driver to provide a mass storage driver..."

I just purchased a Toshiba Satellite laptop (U945-S4140) that came with windows 8. I am trying to install windows 7 enterprise 64 bit.
I have the installation file on a bootable USB stick. In order to boot from the USB, I have to go into the BIOS settings and change from UEFI to CSM boot mode. Then the computer will boot from the usb stick and the windows 7 installation begins to work fine.
However, I soon get an error message that "no drives were found. click to load driver to provide a mass storage driver for installation."
I cannot figure out how to proceed. Any help would be greatly appreciated.
Cheers

Hello Maxxpower33, thank you for your words.
I looked through the error logs that could be generated from the tool and found this one which may be what you experienced. Kindly let me know if this is what you got:
"Files copied successfully. However, we were unable to run bootsect to make the USB device bootable. If you need assistance with bootsect, please click the "Online Help" link above for more information."
Some further information is that I found this post where another user experienced the same error on a laptop, although the speculation mentioned in the post is that the user does not have a Windows store account under which he purchased the license for Windows
7 Home Premium, which is the flavor he was trying to get on the bootable drive. However, this does not seem to be a valid response due to the fact that the tool does not check Windows XAuthCert Servers for validation on licensing. So ignore that
portion of the post, but the 2nd post helps a bit by linking to another article, providing both below.
Forum Port With Same Error
Article with 4 methods to create
a bootable Windows 7 USB Drive
In that first post, further down, is another reply to a tool that I have not tested with. So please use caution on this one as I cannot find very much feedback other than on their own website, but sounds much like the first tool I mentioned in my first
post "Unetbootin", but this one is called Rufus, and two people did mention they had good success with this tool after having difficulties with the Windows utility.
Rufus
After all that is said and done, there is not 1 tool that will work for everyone all of the time on every environment. Why? I would like to know also...but speculate hardware/firmware/bios combinations could be the culprit. One of these
tools should work for you and it would be my recommendation to try them in this order (skipping what you've already tried):
1) Windows 7 USB/DVD Download Tool
2) Unetbootin
3) Manually creating the partition and xcopy'ing the extracted ISO to it
4) Rufus
5) Borrow a PC with a DVD-R in it and burn the ISO to a disc and install from it. If your laptop does not have a DVD drive, an external drive can be purchased for roughly $25 or less. Or if you have an internal drive laying around, buy an enclosure
for about $15 and put the drive inside there and attach it to your laptop via USB or eSATA.
As always, my advice is nothing more than my opinion, which are like bungholes...everyone has one and they all stink! LOL!
John Fester

After Windows re-installation = problems

After i reinstall windows i have these problems:
Any ideas? Waisting of time, cant work..

I would do a clean uninstall and then re-install: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Oracle 11 under Windows 2008 installation problems

I cannot make Oracle 11.2.0.1.0 work under Windows 2008. The server's host name is SARABI. Anything of the following takes place on SARABI, no remote access is involved.
The procedure has been as follows...
- Windows 2008 was installed
- Oracle 11.2.0.1.0 was installed
- listener.ora, sqlnet.ora, tnsnames.ora were modified
- no other Oracle configuration file was touched
At this point it worked. I could connect with SQL Plus and with SQL Developer.
Next the server was rebooted. Without having changed anything at all, connecting was impossible. The message is "12514, TNS, listener does not currently know of service requested in connect descriptor". The three configuration files are given below.
Currently, all services are running accoording to Windows Control Panel. There are no entries in the eventlog. Executing "TNSPING SARABI" works fine. Executing "LSNRCTL status" shows "The listener does not support any services" (translated from German "Der Listener unterstützt keine Services"), the full output is given below.
--- LISTENER.ORA ---
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = SARABI)(PORT = 1521))
ADR_BASE_LISTENER = C:\Programme\Oracle\Admin
--- SQLNET.ORA ---
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
SQLNET.AUTHENTICATION_SERVICES= (NTS)
ADR_BASE = C:\Programme\Oracle\Admin\product\11.2.0\dbhome_1\log
--- TNSNAMES.ORA ---
SARABI =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = SARABI)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ORCL)
--- LSNRCTL status ---
C:\Users\admin>lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 25-SEP-2010 11:49:24
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Anmeldung bei (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS des LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Production
Startdatum 25-SEP-2010 11:24:54
Uptime 0 Tage 0 Std. 24 Min. 32 Sek.
Trace-Ebene off
Sicherheit ON: Local OS Authentication
SNMP OFF
Parameterdatei des Listener C:\Programme\Oracle\Admin\product\11.2.0\dbhome_1\network\admin\listener.ora
Log-Datei des Listener c:\programme\oracle\admin\diag\tnslsnr\SARABI\listener\alert\log.xml
Zusammenfassung Listening-Endpunkte...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SARABI.lionsland.local.de)(PORT=1521)))
Der Listener unterstützt keine Services
Der Befehl wurde erfolgreich ausgeführt.
Michael G. Schneider

Deleting the three configuration files and recreating them with "Net Manager" gives...
--- LISTENER.ora ---
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = SARABI)(PORT = 1521))
ADR_BASE_LISTENER = C:\Programme\Oracle\Admin\product\11.2.0\dbhome_1\log
--- SQLNET.ora ---
NAMES.DIRECTORY_PATH= (TNSNAMES)
ADR_BASE = C:\Programme\Oracle\Admin\product\11.2.0\dbhome_1\log
--- TNSNAMES.ora ---
SARABI =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = SARABI)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ORCL)
After rebooting the server, the same problems appear. Executing "sqlplus SYS/**** AS SYSDBA" gives "database not started". Then executing startup gives...
ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER_ORCL'
Michael G. Schneider

Oracle Financial 11.5.10.2 on Windows 2003 Installation Problem

Similar Messages

Maybe you are looking for