Oracle Flexcube installation and documentation?

Hi all,
I am looking for documentation and software requirements to setup Oracle Flexcube. The only documentation I can find so far is the brochure from Oracle:
http://www.oracle.com/us/industries/financial-services/046907.html
I understand that Flexcube was a product developed by Bangalore India team years ago and then acquired by Oracle. However, I cannot find the installation and configuration documentation for Oracle Flexcube and I also cannot find where to download the Oracle Flexcube software either.

Contact details are available in the same link -- http://www.oracle.com/us/industries/financial-services/046907.html
Please also see:
http://www.oracle.com/partners/en/products/applications/flexcube/get-started/index.html
How to Contact FLEXCUBE (FCUBS) and Daybreak Support (Doc ID 1105772.1)
Thanks,
Hussein

Similar Messages

I have the new Oracle 8i installer and here is why

I have been trying to get Oracle 8i on Linux and I feel that I
must share
my thoughts on the new Oracle installer with everybody.
I hate the new installer. I used to run the installer from
home over my
128Kbps connection while I was connected to the office machines,
because it
was simple text based. And Oracle 8i has changed all that!
I have nothing against GUI based installers, only when they have
a little too
many animated images that eat up bandwidth. I had to drive all
the way to
the office because I did not have sufficient bandwidth to display
the darn
ringing bell animated image. This is strictly the mentality of
Windows users
who like to work on the console of servers.
And check this out:
line 118 in my install log file at :
/usr/local/oracle/u01/app/oracle/oraInventory/logs/installActions.log
says :
platGroup = WINDOWS
And this is on Linux!!! Maybe the Oracle folks are forgetting
that Linux
users are a little too sensitive to these kind of mistakes. :)
This also supports my theory that the new installer is a gift
from Windows
programmers. Who are not too familiar with the idea of being
able to send
their video display to any computer around the world and work
from there.
A feature every Linux user takes for granted
There are numerous other bugs in the installer and other routines
of Oracle
8i for Linux. Some of them I will list here:
2. The installation types screen list 3 options:
Typical, Minimal and Custom.
Somehow Minimal takes more disk space (642 MB) compared to
Typical (585 MB).
Well that is what the installation screen says. I have not tried
to install
using the minimal install.
3. The installation cant figure out how much free space is
available on the /
partition. Is it that hard? Its gives warnings about how I may
not have
enough space.
4. dbassist cant find the cdrom if you try to install the default
database
from CDROM. It says cannot find CDROM even if you have all your
stuff under
/mnt/cdrom
5. The docs talk about software mount points and data mount
points /u01 /u02
/u03 and /u04 that I created, but I could not find anywhere to
specify them
like I was able to, with the last release.
6. "Oracle Protocol Support" section during the install shows no
options at
all. What happened to good ole Net8?
And many others. This product is a joke.
Atif.
[email protected]
null

My sentiments exactly. There are so many bugs in the
installation of this release that I have just about given up.
And I haven't even started testing the new features yet!
I've tried the install on RedHat 6.0 straight out of the box (no
patches or updates applied) and followed the OIG and release
notes to the letter. Clearly, no one at Oracle did the same,
because there are many problems during install. I finally got a
simple database running, but there are some real gotcha's along
the way.
Here are just a few of the bugs I've encountered:
1. Zero length library file $ORACLE_HOME/lib/libnjni8.so.
Netasst doesn't work without it. Someone said they posted the
source code to the comp.databases.oracle.server newsgroup, but I
can't find it.
2. Database Creation Assistant thinks dbmssql.sql is called
dbmssml.sql.
3. Building the Intelligent Agent with TCL 7.5 causes a cascade
of undefined references when running gmake -f ins_oemagent.mk
agent
4. Database Creation Assistant doesn't understand OFA. It wants
to put all of the database files /u01/app/oracle/oradata/<sid> !
5. Database Creation Assistant will sometimes prevent editing
the data file names to put them in OFA compliant directories.
I am appreciative of the free developer licenses for so many
Oracle products, but this is the worst Oracle install I've had
in 12 years.
Atif (guest) wrote:
: I have been trying to get Oracle 8i on Linux and I feel that I
: must share
: my thoughts on the new Oracle installer with everybody.
: I hate the new installer. I used to run the installer from
: home over my
: 128Kbps connection while I was connected to the office
machines,
: because it
: was simple text based. And Oracle 8i has changed all that!
: I have nothing against GUI based installers, only when they
have
: a little too
: many animated images that eat up bandwidth. I had to drive all
: the way to
: the office because I did not have sufficient bandwidth to
display
: the darn
: ringing bell animated image. This is strictly the mentality of
: Windows users
: who like to work on the console of servers.
: And check this out:
: line 118 in my install log file at :
: /usr/local/oracle/u01/app/oracle/oraInventory/logs/installActio
ns.log
: says :
: platGroup = WINDOWS
: And this is on Linux!!! Maybe the Oracle folks are forgetting
: that Linux
: users are a little too sensitive to these kind of mistakes. :)
: This also supports my theory that the new installer is a gift
: from Windows
: programmers. Who are not too familiar with the idea of being
: able to send
: their video display to any computer around the world and work
: from there.
: A feature every Linux user takes for granted
: There are numerous other bugs in the installer and other
routines
: of Oracle
: 8i for Linux. Some of them I will list here:
: 2. The installation types screen list 3 options:
: Typical, Minimal and Custom.
: Somehow Minimal takes more disk space (642 MB) compared to
: Typical (585 MB).
: Well that is what the installation screen says. I have not
tried
: to install
: using the minimal install.
: 3. The installation cant figure out how much free space is
: available on the /
: partition. Is it that hard? Its gives warnings about how I
may
: not have
: enough space.
: 4. dbassist cant find the cdrom if you try to install the
default
: database
: from CDROM. It says cannot find CDROM even if you have all
your
: stuff under
: /mnt/cdrom
: 5. The docs talk about software mount points and data mount
: points /u01 /u02
: /u03 and /u04 that I created, but I could not find anywhere to
: specify them
: like I was able to, with the last release.
: 6. "Oracle Protocol Support" section during the install shows
no
: options at
: all. What happened to good ole Net8?
: And many others. This product is a joke.
: Atif.
: [email protected]
null

Oracle report installation and system flow

Please help me to give some inputs for the oracle development. The 12 reports wont integrate with the existing system because it was not built by us and also I want to know how the oracle report installation will be done. Please update my diagram scenario of the proposed solution as below
Problems Faced in the existing system:-
================================
•     12 Critical Finance Reports not generated according to user requirements
•     Most of basic feature for reporting purposes are not implemented in current system which is in Oracle Apps 11i - E-Business Suite
•     Takes a lot of time to prepare reports which are needed to be presented for management meetings.
Proposed System
===============
Expectation
•     The finance dept plans to redevelop 12 new critical reports for their system
•     The new implementation must be compatible with the future migration of current Oracle Apps 11i - E-Business Suite to Oracle Apps version 12.
Solution
The new development will be built using the oracle reports and won’t be integrated with the existing application. Oracle reports do not require any specific installation to be done at client PC.
Advantages
•     If it's from a desktop users may find it easier to fire the reports as they may not require to login to Apps.
•     When the Report is displayed, the user can simply generate the report to several formats like PDF, XLS, HTML, RTF, XML etc.
•     Oracle Reports is reliable: You can serve thousands of concurrent users in a secure and reliable manner.
•     Oracle Reports has the ability to apply changes to a report based on a customization file in XML either at runtime or in batch.
Proposed system flow for Oracle reports development
=========================================
12 reports to be installed onto the Red Hat AS3 system <--------------Red Hat AS3(Oracle E-Business Suite Ver 11i (Apps) and Oracle Database Ver 9.2.0.5) -----> Oracle Database

There are groups specific to e-Business Suite. Please delete this post and post your inquiry there.

Oracle 10G Installation and Migration from 6i to 10G and

I never had the opportunity to Install or Migrate oracle any version.
We are in the process of Installing Oracle 10G and moving Oracle Forms and Reports from 6i to 10G. I am asked by my superiors to conduct the interviews and decide which candidate will be best. These are temporary positions but are very important as a wrong candidate will affect the entire project. Need the right candidate.
I would like some hints or suggestion as to what skills should I test or what questions to ask.
Any sites or any questions will help me.
Thanks to All

See,
to read how we performed the upgrade and see some issues:
http://www.oracle.com/technology/products/forms/index.html
http://www.oracle.com/technology/products/forms/htdocs/upgrade/index.html
http://www.oratransplant.nl/category/oracle/forms/6i-to-10g-upgrade/
Good Luck!!

Oracle ASM installation and raw device options

I am looking to install Oracle ASM on Linux Red Hat AS 4 (ia64) using Oracle 10.2.0.3.
A general question I have regarding prerequisites for ASM using raw devices. It appears there are 2 options for dealing with RAW devices.
1. Use the ASM library driver
or
2. simply bind the devices to raw devices (and then install a new $OH with an ASM instance)
Is there a recommendation from Oracle, industry best practices, expert opinions on which way to go?
If I understand correctly it sounds like option 2 will require an ASM $OH and instance. Is that right or do both option require this?
Can someone provide guidance as to which option I should use, an Oracle whitepaper, a recommendation, instructions or something.
Any help or insight is provided as to which option I should use.
Thank you.
echardrd

OK. Perhaps I am a little condused then. From what I read Oracle ASM recommends the use of RAW devices for ASM storage devices. What I have is a new LUN presented to my database server from the SAN. I assumed that the LUN needs to be mounted in some fashion on the server, but my SA tells me in order to mount it, would require the use of a filesystem. If we put a filesystem(NTFS, ext, etc) on the LUN prior to mounting it, will ASM be able to use it? If ASM can use a device that has a filesystem on it will this add unneccessary overhead (I/O)?
I guess my question is for ASM should I
1. use a RAW partition or a filesystem? Does it matter?
2. Will RAW have better I/O performance?
3. How do i make the LUN presentation from the SAN a usable RAW device to my database server? Any steps or guidance would be helpful since my SA and I can not seem to bridge this gap.
Thanks.

Oracle 9iR2 db and Hardware movement

Friends
We are moving our servers (OS AIX 5.3) and installed softwares from harware IBM p670 to 570. We will move Oracle installations also. We plan to move disk images (no new Oracle server installation) and network controls.
Is there any things that is required to be done by a DBA on Oracle database server side other than relinking it. I hope I will just need to do just relinking of the exectables.
Any suggestions?
Thanks
Vishal

Yes, first you can try a relink. If that doesn't work well, you can always do a reinstall and patch up to the same level.
If the location of all files (control files, datafiles and logfiles etc) are not changed, then it should be alright.
Make sure user and group information is correct and ownership (permission) of the files are right.
If the network IP address changes, you may need to change your listener.ora and tnsnames.ora to reflect the change.

Question about Oracle 9iLite installation

In Oracle 9iLite installation and configuration guide for WinXP, there is the following requirement for pre-installation:
"Remove the Oracle JAR file classes1x.jar from the classpath before installing Oracle9i Lite. You can restore the classpath after the installation is complete"
Do you know how to remove it?
Thanks a lot!

Either from a DOS prompt (temporarily for the DOS session) or permanently using My Desktop/Preperties/Advanced/Environmental Variables\CLASSPATH

Is Oracle server installation a pre-req for installing IFS 1.1 on NT?

I have Oracle 8.1.7 server installed on a
solaris box. I want to install IFS 1.1 on
my NT. I did a Oracle 8.1.7 client install
and proceded with the iFS 1.1 installation.
Looks like iFS 1.1 installer on NT needs
Oracle HTTPD server to be running. This
HTTPD server seems to be packaged only
with the Oracle server installer and not
the client installer.
null

You're right. But you don't have to install the whole Oracle server on the machine where you want to install iFS. Just start the server installation, go to a custom install, and deselect everything except the Oracle HTTP Server component. That's all iFS needs on the middle tier machine (where you installed the Oracle client).

Oracle Universal Installer Version

I have the Oracle8i Client CD release that
I just got a couple of weeks ago (8.1.5).
I was tring to get the lastest version of
Oracle's ODBC Driver installed. I downloaded
it off of the web and followed instructions
in readme. Problem is that it has a
dependancy check on the Oracle Universal Installer and it won't install. Cant find the OUI version it wants on the web site.
I have OUI 1.6.0.9.0 and it wants 1.7.0.15.0 or newer. Anyone know where I can get the right version?

Yes. You want to download the version of the ODBC driver that corresponds with your Oracle client. If your Oracle client is 8.1.5.x.x, download the 8.1.5.6 ODBC driver. If your Oracle client is 8.1.6.x.x, download the 8.1.6.1 ODBC driver. Installing the 8.1.6.1 ODBC driver on an 8.1.5 Oracle client may cause problems.
Any version of the ODBC driver will connect to any version of the database.
Justin Cave
ODBC Development

ORACLE 8i INSTALLER WITH P4 ISSUES AND TNS ERROR WITH 9i

I want to thank those that have been of help on this subject matter. Finally after 2 agonised weeks, I was able to get around the Oracle 8i installer not able to run on my Pentium 4 laptop. Also having problem logging in to 9i SQL*PLUS. I just want to reinstate that by renaming the file symcjit.dll to symcjit.old does not work automatically. I tried it on Oracle 8.1.6 and 8.1.7(Enterprise/Standard/Personal) many times. Although it did work with Oracle Personal 8.1.6 at one point in time after the system has already 9i installed. After uninstalling the 9i, the installer stopped working again. I WAS NOT SURE IF ORACLE HAS THIS ORACLE 9i DATABASE ENTERPRISE/STANDARD/PERSONAL FOR WINDOWS NT/2000/XP ON CD. THE ONE I BOUGHT IS THE 9IAS AND 9IDS (2 Boxes) WHICH WILL NOT CONFIGURE YOUR DATABASE FOR YOU.
When I was about to give up after doing some more research, then I saw the download for "Oracle9i Database Enterprise/Standard/Personal Edition for Windows NT/2000/XP". I followed the exact direction, but did everything in my directory and not DOS since I don't know the command for unzipping files in DOS. By unzipping all the files in their respective folders Disk1/Disk2/Disk3, and going to install/win32/setup.exe, the rest of the installation went smoothly, when the system prompt for the location of the next disk, just type 2 and then 3. The installation configured everything like tnsnmaes, instances, databases e.t.c. All I did was suppied the password for Sys and System.
By downloading this particular file, I was able to bypass any configuration which is a pain, but not for you DBA guys out there. THE DOCUMENTATION FOR THESE CD,s DID NOT GIVE EXACT STEP BY STEP FOR CONFIGURATION, ONLY INSTALLATION. I AM A DEVELOPER AND NOT A DBA. Orale 8i is more easy to confugure than 9i. I WAS ALSO ABLE TO INSTALL 6i, 9ids AND SQL NAVIGATOR ON TOP OF THIS 9i, AND ALL CONNECTIONS WORKED PERFECTLY BY USING SYS OR SYSTEM AND THE PASSWORD I SUPPLIED DURING INSTALLATION.
AGAIN THANKS TO EVERYBODY USING THIS FORUM. YOU GUYS ARE GREAT AND DOING A GOOD JOB HELPING OUT OTHERS. LET'S KEEP IT ROLLING!!!
Timi Jones

O yea, I used WinZip 8.1 and it created correct directory stucture - that's the whole problem

Where can I find Documentation for Oracle financial installation

Hi
Where can I find Documentation for Oracle financial
installation as which all modules to be downloaded for linuk server etc
here is what I have found
===================================
Oracle9i Application Server, Version 1.0.2.2.2 CD Pack for Linux x86 [Act as Server][to be installed on main linux server]
===================================
OracleÂ® Applications 11i Release 9 CD Pack for Linux x86 [Act as client][to be installed on client sean,AJ,Vinod]
===================================
Internet Developer Suite (1.0.2.4.1) CD Pack (with iAS Pack) for Microsoft Windows (32-bit)
===================================

user11872870 wrote:
Hi Tubby,
http://www.quest.com/documents/list.aspx?SearchOff=true&ContentTypeID=20&prod=1
This link has many pdf files but none has the useful information. Those pdf's are just 2 or 3 pages each.Sad Christmas for you then i suppose.
Perhaps you could contact the vendor (quest) and get them to help you in your search for whatever it is you're looking for. An Oracle SQL and PL/SQL forum is not the venue for this, please mark the question as answered, and good luck in your search.

Best Practices for BI, ADF and Oracle Forms installations on Weblogic

Hi, I'm researching options on upgrading to Oracle 11g Middleware. My company currently has Oracle Forms 10g running on Oracle Application Server.
We are interested in using Oracle Forms 11g, ADF and Jdeveloper, and Business Intelligence with Oracle's Weblogic 10.3.5.
Is there any whitepapers or documentation on best practices for installing alll of these components together?
For instance, can ADF ( with JSF 2.x ) be installed in the same domain as Oracle Forms 11g but use different managed servers?
Will Business Intelligence need to be in a seperate Oracle Home with it's own weblogic installation? I spend a lot of time trying to get the JSF upgraded to 2.x in the Business Intelligence installation and could not get it to work.
I know it's a pretty broad question but thank you for any direction on this.

Thanx for the reply! I read through the documents and they are very good at explaining how to install the different components individually. I still can't find much on installing them together. I hope it's not just going to be a trial and error thing.
So far I've installed done the following successfully:
Installed 10.3.5 weblogic
Forms and Reports 11g on top of 10.3.5
I've created an additional managed server for our ADF applications.
My next step is upgrading the JSF to 2.x. I would have to stage patches 12917525 and 12979653. I'm afraid it will break the forms and reports though. Any ideas?

Where is the oracle linux 6.4 installation screenshots documentation ?.

Hello
Some questions.
1. Where is the oracle linux 6.4 installation screenshots documentation ?.
2. Is the disk layout documentation/swap sizing information listed in documentation ?.
I have 8GB memory installed on a 64 bit machine
I want to install the swap partition at the end of the disk.
I want to install oracle 11gr2 database software as well.
--Cheers Glenn
oracle otn
(11.2.0.1.0)
Edited by: Avi Miller on Apr 17, 2013 3:30 PM to remove download links.

The installation guide available at https://linux.oracle.com/documentation/ may require some updating. Last time I checked, chapter 16.16.5. Recommended Partitioning Scheme, did not include the swap space required for hibernation mode.
It is mentioned here:
https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Installation_Guide/s2-diskpartrecommend-x86.html
Swap space size recommendations issued for Red Hat Enterprise Linux 6.0, 6.1, and 6.2 differed from the current recommendations, which were first issued with the release of Red Hat Enterprise Linux 6.3 in June 2012 and did not account for hibernation space.

Installation of Oracle Application Server and Oracle forms 10g

I am currently using form 6i and Oracle 10g in my home. but i want to
Install and setup Forms 10g on my Pentium IV PC with oracle Application server 10g.
I need the issues in this installation and I want Proper steps and Software and hardware Requirement for Implement my oracle forms on web.

You can download the documentation from otn.oracle.com or if u have dvd/cd
then installation guide will be there inside the dvd/cd
Rajesh

Where can I find Oracle Flexcube documentation?

I am totally new to Oracle Flexcube.We are trying to implement Oracle Flexcube Core Banking solution at the bank where I work.
Unfortunately,I am unable to obtain any comprehensive documentation on Flexcube that deals with installing,performance monitoring,cloning plus other issues of the application.Where can I get this documentation?
Also,I would like a list of vendors that can deploy and customize Oracle Flexcube on behalf of our bank.
Please assist.
Thanks.

Unfortunately,I am unable to obtain any comprehensive documentation on Flexcube that deals with installing,performance monitoring,
cloning plus other issues of the application.Where can I get this documentation?You should get in contact with Oracle Financial Services Software to clarify this.
Also,I would like a list of vendors that can deploy and customize Oracle Flexcube on behalf of our bank.If needed, I know a company located in germany.
Regards,
Oliver.

Oracle Flexcube installation and documentation?

Similar Messages

Maybe you are looking for