Oracle Forms 11g - IE 8 issues

Hello
I am running Forms 11.1.1.2 in Windows XP. After installing OE 8 my forms 11g apps are not working.
Is IE 8 not supported with Forms 11g? Which version of JRE should I use in this case?
Thanks,
Ram

Unfortunately, saying "it doesn't work" won't offer enough information to allow us to say anything valuable.
If all you want is certification information for FMw 11R1 (11.1.1.x), you can find it here:
http://www.oracle.com/technetwork/middleware/downloads/fmw-11gr1certmatrix.xls
If you are interested in assistance technically, please explain what you mean by "doesn't work". Does nothing happen (browser is blank when attempting to launch a form)? Is there an error message (if yes, what is it)? Does the JRE attempt to load (look in the system tray for the java icon)?
If this is a new installation, I would recommend applying the 11.1.1.3 patch as it is the only patch that will be made available via OTN. All other patches are only available using MyOracleSupport (support.oracle.com).
The 11.1.1.3 patch can be found here:
http://www.oracle.com/technetwork/middleware/downloads/fmw-11-download-092893.html
Look for "Portal, Forms, Reports and Discoverer (11.1.1.3.0)". Also note that before installing this, you will need to bring WLS to version 10.3.3 in order to ensure compatibility. That can be found here:
http://www.oracle.com/technetwork/middleware/weblogic/downloads/wls-main-097127.html
Do NOT install a version newer than what is supported with the FMw version you are using.
<li>FMw 11.1.1.2 & WLS 10.3.2
<li>FMw 11.1.1.3 & WLS 10.3.3
<li>FMw 11.1.1.4 & WLS 10.3.4
<li>FMw 11.1.2.0 & WLS 10.3.5

Similar Messages

Domain issue while installing oracle forms 11g

Hi . Trying to install oracle Forms 11g ,while installing it is getting error while creating domain .. Any clue.

Below are log after performing the suggested steps..
Successfully launched the Node Manager.
The Node Manager process is running independent of the WLST process.
Exiting WLST will not stop the Node Manager process. Please refer
to the Node Manager logs for more information.
The Node Manager logs will be under D:\Oracle\weblogic64\wlserver_10.3\common\nodemanager
Node Manager starting in the background
java.lang.Exception: The node manager failed to start
    at oracle.as.provisioning.weblogic.ASDomain._startNodeManager(ASDomain.java:3709)
    at oracle.as.provisioning.weblogic.ASDomain.startNodeManager(ASDomain.java:3517)
    at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:637)
    at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
    at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
    at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
    at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
    at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
    at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
    at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
    at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
    at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
    at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
    at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
    at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
    at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
    at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
    at java.lang.Thread.run(Thread.java:662)
java.lang.Exception: The node manager failed to start
    at oracle.as.provisioning.weblogic.ASDomain._startNodeManager(ASDomain.java:3709)
    at oracle.as.provisioning.weblogic.ASDomain.startNodeManager(ASDomain.java:3517)
    at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:637)
    at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
    at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
    at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
    at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
    at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
    at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
    at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
    at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
    at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
    at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
    at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
    at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
    at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
    at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(Confi

Oracle Reports In Oracle Forms 11g Parameter problem.

Hello techies,
            I am using Weblogic server 10.3.5 with oracle forms 11g at windows 7.I have a report that is Bar_code.rdf.It has two parameters as:
P_1---->character type---->accepts the options(barcode generated or barcode not generated)
P_2---->Number type------->accepts the subgroupitemId.
This report is well working with oracle report builder. Now I tried to run it from my oracle forms.It runs but it does not accept Parameter P_2. I have used
sParms := 'P_1='||:L_BAR||' P_2='||TO_NUMBER(:TXT_ITM_GRP);
set_report_object_property(roRepid,report_other,sParms||' paramform=yes');
set_report_object_property(roRepid,REPORT_SERVER,sReportServer);
v_rep := RUN_REPORT_OBJECT(roRepid);
sJob := SUBSTR(v_rep,LENGTH(sReportServer)+2);   --
But there is a parameter form is shown but when i click submmit query the,,,,there is
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request.
please give me the solution
thank you
regards
aaditya

Hi
are there character symbol appeared in your parameter ?
i've suffering for some unexpected error for parameter value end up with slash , like D:\temp\   ....
and oracle sr (support) says that with workaround mechanism (add additional slash like D:\temp\\ ) they have not plan to fix this issue .
hope this helpful for you.

How to use Java Beans in Oracle Forms 11g at 64 bit windows7

Hello Experts,
I am using Oracle forms 11.1.2.2.0 with weblogic 10.3.6 generic at windows 7 64 bit.
My java version is jdk1.7.0_51.
Now I have a htmlbutton.jar (which is for bean item in oracle form and this jar file works well for oracle forms 11g 32 bit windows 7 environment).
I have takken steps:
1:-Put jar file in home\java folder.
2:-add this jar file into archive in formsweb.cfg.
3:-Add this this jar file(which is in my home- java folder) in form_class path in registry.
Now when I try to locate this jar file in my oracle form.There is no such jar file.what are the steps to use this jar file in oracle forms bean item.
Please told me what is wrong here.
thank you
regards
aaditya.

It is unclear where you are having a problem. Is your issue at runtime (when the form runs in the browser) or when working in the Builder on the form?
Also be aware that you will need to sign your jar and include some new manifest entries. Refer to the Java 7u51 documentation and blogs that discuss the changes.
https://blogs.oracle.com/java-platform-group/entry/new_security_requirements_for_rias
http://docs.oracle.com/javase/7/docs/technotes/guides/jweb/manifest.html

Copy/Paste functionlity is not working in oracle forms 11g

Hi All,
We are using custom built big application (oracle 11g/forms 11g).
1. And few user are not able to copy/paste from oracle forms 11g to winword.And its random sometime they can ,sometime they can't .
2. If they have problem means they have copy/paste issue and (When we close application and run it again it is working fine)
3.it's random we are not able to re-produce in development environment.
What i noticed both user have problem and both are using left hand mouse ,generally we use left/right they are using right/left.
Here the Environment Detail:
Java runtime :1.6.0_26
Weblogic server
oracle forms 11g
So just wondering is there any changes required. Seniors/Guru please advise.
Thanks!

It is very important to make clear which direction you are going. If you are not able to copy from Forms and paste to an external application, this could be any one or more of the following:
1. There is a problem with the JRE. Consider uninstalling ALL currentlly installed JREs and install the latest supported version 1.6.0_33
2. There may have been an issue with the Forms version you are using. Be sure you are using 11.1.1.6 or 11.1.2.0. If not, install the latest patch.
3. The JRE was unable to properly identify or store the digitial signature in the Forms jar file or one which you included (custom code). If you are using any customer jar files, ensure that they have been properly signed. Also be sure that JRE cache is being stored on the local client machine and not a remote location as this is not supported. If you have not altered the default, the cache is stored in the user's home directory under Application Data (AppData for Win7)
4. Could be a mouse driver issue. Go to the mouse vendor's web site and get the latest driver for that mouse. Do not use the MS drivers.
Example:
C:\Users\<USER NAME>\AppData\LocalLow\Sun\Java\Deployment\cache
So, recommendations:
1. Uninstall all JRE versions currently installed. Install 1.6.0_33
2. Ensure that you are using 11.1.1.6 or 11.1.2.0
3. Clear the JRE cache. To do this close ALL open browsers and open the Java Control Panel. Look on the General tab for Temporary Internet Files > Settings > Delete Files > Ok
4. Install the latest mouse driver.
5. Retest
Edited by: Michael Ferrante (Oracle) on Jul 25, 2012 2:58 PM

Showing Blank Records oracle forms 11g

Deal all..
i am using oracle forms 11g , i created a form by using data block wizard & layout wizard , but when i run the form, the form running successfully in browser, url is ( http://arun-pc:9001/forms/frmservlet), but it is showing empty records.
when i check with sql plus user Scott , i found 10 records in departments table , same user and same table i used in oracle forms.
i don't know what is the problem.. i am new to oracle forms please help me..
i am waiting 4r your valuable reply
thank s in Advance..

Hello. Mr.harsh shah...
Thank u for your reply..
I follow the link what u given in above post.. But still i have the same issue.. i am not sure, but i think i have problem with my Environment, bcz in many blogs i read that oracle forms is not recommended to use with 64 bit OS. and second , iam not using developer suite 10g,
currently i am using,
operating system: windows server 2008 r2
weblogic server :- wls1036 (64bit)
JDK :- 7u17 64bit
Oracle forms :- 11g
and database in another host , just i edit tnsnames.ora file in forms directory. the following are my configuration options
Oracle Forms and Reports Installation
Configuration Options
Middleware Home Location: C:\Oracle\Middleware
Oracle Home Location: C:\Oracle\Middleware\Oracle_FRHome1
Oracle Instance Location: C:\Oracle\Middleware\asinst_1
Oracle Instance: asinst_1
Domain Option: Create Domain
Domain Name: ClassicDomain
Domain Home: C:\Oracle\Middleware\user_projects\domains\ClassicDomain
Domain Host Name: WIN-DMJUC51KRHF
Domain Port No: 7001
User Name: weblogic
Automatic Port Detection: true
Administrator Console: http://WIN-DMJUC51KRHF:7001/console
EM Console: http://WIN-DMJUC51KRHF:7001/em
EMAgent URL: http://WIN-DMJUC51KRHF:5155/emd/main
Forms URL: http://WIN-DMJUC51KRHF:8888/forms/frmservlet
Reports URL: http://WIN-DMJUC51KRHF:8888/reports/rwservlet
i check all the links above, all services showing running successfully.. but when i run the form , i dont fine any records , showing empty and blank records..
please give me clarification ...
Thank u very much..
Arun

Oracle Forms 11g certification

Hello,
I wanna know if there is any certification for Oracle Forms 11g. If not, when will be available?
Thanks

Roger22 wrote:
yes but 11 contains support for JMS for example, which 9 does not support. this does not mean that someone certified on 9 will know everything about 11It is always (or at least nearly always) the case that the topics in a certification exam represent a subset of what could be included.
If the core of the current forms topics remains valid across versions, and i suspect it does, the cost/benefit/issues from an exam revision may not be appropriate for oracle.
In general the main target/userbase of this certifcation may well be as a target from the developer WDP program.
There are arguments for the certifcation/exam to be revised, Oracle may have business reasons not to do so.
Rgds - bigdelboy.

Use of Times ten database with Oracle Forms 11g

Hi,
We need to use some caching / pre-fetching solution with Oracle Forms 11g. Is there a possibility that Oracle Forms 11g can be used with Times ten database.
Regards,

We have never tested TimesTen with Forms 11g but we suspect there are issues that may prevent if from being used.
Sorry.
Chris

Oracle Forms 11g / frmall.jar or frm90all.jar installation

I need to import Oracle.Forms.properties.ID in one of my JDeveloper application.
I am using JDeveloper 10.1.3.5. I need frmall.jar/frm90all.jar to make the above import statement work in JDeveloper if i am not mistaking.Basically i need to add either of the .jar in Jdeveloper.
For that I came accross Oracle Forms 11g. For Oracle Forms 11g I have installed wlserver_10.3. and i have ofm_pfrd_win_11.1.1.3.0_32_disk1_1of1\Disk1 with Oracle Fusion Middleware forms 11g setup. When I click on that setup getting a Oracle screen asking me for Oracle Middleware Home and Oracle Home Directory. My Oracle 11g db is installed in C:\new\Oracle11g.
And setting up ORACLE_HOME pointing t that directory. clicking on next on that screen is giving errors like Oracle Home location is not specified , The specified MiddleWare Home is not valid and Oracle.classicwsl.top could not be located etc.
Can Anyone help me solving this issue so I can use Oracle Forms ID in JDeveloper.?

Let me tell you what exactly i am doing :
I have set the below environment variables:
Path=C:\new\Oracle11g\bin;D:\app\veeralakshmi_v01\product\11.1.0\client_1\bin;C:\Program Files\ZeroC\Ice-3.4.1\bin;C:\Program Files\Java\jdk1.5.0_16\bin;
ORACLE_HOME=C:\new\Oracle11g\BIN;
I have C:\Oracle\Middleware in this path i have folders and sub folders like C:\Oracle\Middleware\jrockit_160_17_R28.0.0-679
C:\Oracle\Middleware\oepe_11gR1PS2
C:\Oracle\Middleware\wlserver_10.3
C:\Oracle\Middleware\modules
C:\Oracle\Middleware\coherence_3.5
C:\Oracle\Middleware\jdk160_18
and other folders and files.
Now when i click on \\myshecsccm01\PackageSource\ofm_pfrd_win_11.1.1.3.0_32_disk1_1of1\Disk1\setup it takes me to Oracle 11g fm . On step 2 of 6
for Oracle Middleware Home :C:\Oracle\Middleware
and Oracle Home Directory: ORACLE_HOME
i m giving.
Here the Middleware folder contains the above folders/sub folders listings.
and clicking on next I am getting the below errors:
INST-07010: Validation of Oracle Home location failed. The location specified does not exist.
Enter a valid existing directory
INST-07100: The Oracle home provided does not contain Oracle Portal 11.1.1.2.0.
In order to patch your existing version please provide an Oracle home that contains the product mentioned above. If you choose to continue, only the oracle_common directory and any components that both products have in common will be patched.
INST-07293: Middleware home location specified does not have the required Oracle homes installed in it. The Oracle homes for the following components is not installed oracle.classicwls.top.
Provide a different Middleware home location or install the required Oracle Products and try the install again
So as per your suggestion My middleware folder is not empty.
what should I do?
And after doing all these installtions will i be able to get the frmall.jar file which i really required to use it for importing Oracle.forms.properties.ID?
Edited by: 874822 on Jul 25, 2011 9:40 PM

Encounter problem when running test.fmx in Oracle form 11g

I am new to Oracle form 11g and encounter a problem regarding testing the Form Services.
I have Oracle form 11g (deployment mode) on my app server. I opened 'Run a form on the web' and clicked 'Run form' to conduct a test with default values suggested by the screen. Then I got the below screen showing 'An add-on for the website failed to run'.
Is the problem in relation to IE setting? or is my set up of Oracle form 11g not OK?

Hi ,
This community is to discuss Weblogic Server specific issues, you can post this query Forms in for better response in the below link:-
Oracle Forms (MOSC)
Regards,
Prakash.

To set access key for push button in oracle forms 11g

Dear Team,
I have following setup:-
We are using oracle database 11gR2
Oracle Forms & reports : 11.1.2
O.S : Windows 7 Professional
We have migrated oracle forms version from 6i to 11g
In oracle forms 6i in save button's property palette we set access key as 'S', so when we press alt+S cursor move to save button, same is not working in oracle forms 11g.
What changes I have to made in new version so that after pressing alt+S cursor will move to save button.
Any help is appreciated.
Thanks in Advance.

You will need to define your custom key map in the key mapping file you use. Typically fmrweb.res or fmrpcweb.res. Edit the file in a text editor and take a look to figure out where you need to make the change.This is wrong! The OP is talking about the Access Key (key mnemonic's) of a button. This has nothing to do with the mapping of keys in the frmweb.res, etc., files.
@parapr, You don't mention the Java version installed and you don't mention if your OS is 32-bit or 64-bit. Likely, this issue could be related to an incompatible Java version. We use Access Keys in our 11g R2 application and they work just fine. Our Java version is 1.6.0_31. If you are using Java 1.7.0 - this version is not yet certified with Oracle Forms and I would recommend you downgrade to 1.6.0 (latest version).
Craig...
Edited by: CraigB on Dec 3, 2012 9:09 AM

Pre-requisites for running oracle forms 11G

What are the pre-requisits for running Oracle forms 11G?

Ok - where to begin?
From the beginning....
<blockquote>1. There are prerequisites for nearly every Oracle product. If you have not read the Installation Guide and Systems Requirements Guide you likely are missing something. Docs are [URL http://docs.oracle.com/cd/E24269_01/index.htm]here
2. If you followed the installation guide and completed the installation without error, the basic product works out of the box without any configuration changes. Don't start tweaking unless you understand the change.
3. In order to use an application server of any kind, you need to ensure it is running.
4. If you have chosen the "Development" installation type (applies to 11.1.2 only) then you will not have an HTTP Server and it is not needed. Your listener will be the WLS managed server (usually port 9001).
5. If you have chosed the "Deployment" installation type then you will have HTTP Server. You can access your Forms application via the HTTP Server Listen port (usually 8888) or the WLS_FORMS port.</blockquote>
To the issue that started this post... "+*Page cannot be displayed*+"
This error is either caused as a result of there being no listener running, specifically the HTTP Server or the wrong URL was entered in the browser, or the hostname used in the URL does not map to the correct machine where the listener is running. If you have installed and are testing on your local machine and that machine does not have a static IP address and/or a DNS registered name then fixing these issues would be a few of those "prerequisite" steps I mentioned. This is documented here:
http://docs.oracle.com/html/E18558_01/fusion_requirements.htm#BABFHBID
The above configuration needs to be completed before the installation is started.
To the next issue or change in error message: "+*Failure of server APACHE bridge: No backend server available for connection...*+"
This means that HTTP Server (specifically mod_wls) is unable to contact WLS_FORMS. This could be because WLS_FORMS is not running or because of those prereq steps noted above or a variety of other things related to not following the instructions. Refer to MyOracleSupport Note 1304095.1 for more details about this error.
Finally, as for the need for a JRE, you can do this either before you attempt to run a form or allow the autoinstall feature of the browser perform the installation. However, as Craig mentioned, you would be better off installing the latest version which is 1.6.0_33. You can change your configuration to automatically do this, but if you are new to FusionMiddleware and/or Forms doing the JRE installation manually at this point is probably a good idea. I also recommend starting with Internet Explorer because likely some config changes will be necessary to get it working.
As I mentioned, for the most part, the installation should work out of the box without changes. I would recommend getting the default form (test.fmx) running before attempting to make too many changes.
(If you chose the Deployment install type) http://youMachine:8888/forms/frmservlet?form=test
(If you chose the Development install type) http://youMachine:9001/forms/frmservlet?form=test
.

Calling Report from Oracle form 11g

I am new to Forms 11g, trying to call report from Oracle forms 11g .
I want to call report from oracle forms, but its giving error.
Below is the code
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('empreport'); -- report node in forms builder
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_EXECUTION_MODE, BATCH);
set_report_object_property ( repid, report_filename, 'empreport.rdf' ); -- report name
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,cache);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'RptSvr'); -- report server name
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
if
rep_status = 'FINISHED'
then
WEB.SHOW_DOCUMENT('http://inorasrv-pc:7001/reports/dtd/rwservlet/getjobid='||v_rep||'?server='||'RptSvr','_blank');
else
message ( 'error while running reports-object ' || error_text );
message ( ' ' );
clear_message;
end if;
end;
Above code giving following error :
Unable to connect to report server RptSvr
I think my report servername is wrong
Where to find report server name in 11g.
I am Using weblogic server, so can i give weblogic server name
Thanks in advance.
Edited by: parapr on Aug 17, 2012 1:52 AM
Edited by: parapr on Aug 17, 2012 3:21 AM

Hi,
You have to have the report server
a. Installed and configured
b. Running.
See
http://docs.oracle.com/cd/E21764_01/bi.1111/b32121/pbr_strt001.htm
http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_verify004.htm
http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_conf003.htm#i1007341
If you are using rwservlet then you will find the name from the Configuration file referred to in the last link.
Cheers,

RE: Calling a Web service from Oracle Forms 11g

I wonder if anyone could please help with the following
We have a requirement for a real time communication between Oracles Forms (11g) and SAP over the RR LAN network.
This would require the need to send info to and receive info from SAP as it will be an on-line validation of a Part from an Oracle FORM to SAP (response less than 1 second).
What would be the best and easiest way to code this an Oracle FORMS trigger.
Thanks very much
Durjoy
tel 07790 495 626

Hello,
<p>Did you read this paper ?</p>
Francois

Error while installing ofm_frmrpts_win_11.1.2.0.0_32 Oracle Forms 11g

Dear Oracles,
I am facing problems while installing Oracle Forms 11g
I read many documentations - and follow many pages during installing - but the same error appears every time
I installed Oracle Web Logic Server wls1035_generic.jar perfectly, and then create a web logic domain through Fusion Middleware config wizard
and test the web server through
http://localhost:7001/console
http://img811.imageshack.us/img811/8558/consoleto.jpg
and then installed Oracle Forms and Reports 11g R2 using ofm_frmrpts_win_11.1.2.0.0_32 3 - Disks
I chose Install S/w only - it was installed successfully
then I opened Configure Classic instance and follow wizard
It stopped at creating domain
every time i try it.
with images to show my problem
http://img404.imageshack.us/img404/4131/ofmfrmrptswin11120032.jpg
Iam using win XP-32 bit with 2 GB Ram pc and Oracle DB 11g
and this is the Log
error part
[2012-11-07T22:17:59.937-08:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000JfUeR^Z8XrWjLxVK8A1GaorA000004,0] reportStartConfigAction: EXIT........
[2012-11-07T23:57:03.859-08:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000JfUeR^Z8XrWjLxVK8A1GaorA000004,0]
[2012-11-07T23:57:03.859-08:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000JfUeR^Z8XrWjLxVK8A1GaorA000004,0] [[
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
     at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3149)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3039)
     at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
     at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
     at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
     at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:339)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:662)
[2012-11-07T23:57:03.859-08:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000JfUeR^Z8XrWjLxVK8A1GaorA000004,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
     at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
     at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
     at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:339)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:662)
]]

In addition to Craig's feedback consider the following:
If you did not read the system requirements and installation guide, you likely will have problems.
http://docs.oracle.com/html/E25460_01/r2_fr_requirements.htm
<blockquote>1. Does your machine have a static IP address and/or the Windows Loopback adapter installed and configured?
2. You indicated that you have 2gig of RAM. This is the minimum requirement just to install the product. It is very unlikely that you will be able to comfortably use the product with 2gig of RAM. Likely the performance will be so slow that processes will timeout before they can successfully start. You can actually see this occurring already - look carefully at the log info you posted.
Further, if you are also attempting to run an 11g database on the same machine, this will never happen. Having only 2gig of RAM will never support running the DB and the components of FMw, and the Operating System.</blockquote>

Oracle Forms 11g - IE 8 issues

Similar Messages

Maybe you are looking for