Oracle Forms 11g SSO with OID and IAM
What versions of OID and Access Manager are required to get an Oracle Forms and Reports 11.1.1.2 application
on Weblogic 10.3.2 configured for Oracle SSO using OID authentication?
We want the OID to store and authenticate Users for username and password logins to the database, then
ultimately by user Certificate authentication in OID. I have OID 11.1.1.2 installed and SSO enabled for Forms
in Enterprise Manager.
Is Access Manager required for Forms SSO with OID authentication to work or just to allow user interaction
for registration and Password reset?
Things mention OAM 10.4.3 and others talk about IAM 11g for Forms 11.1.1.2 SSO to work with OID.
We did this back in Oracle Forms and OID 10g with JSP and LDAP to setup users but I understand 11g is
different and IAM can help or is required for this type of SSO to work.
Any help?
Edited by: Kirch on Apr 30, 2013 7:39 AM
Hi,
According to Oracle's certification matrix found at http://www.oracle.com/technetwork/middleware/downloads/fmw-11gr1certmatrix.xls, Oracle Forms 11.1.1.2 is not supported to use any Oracle Access Manager (OAM) version. OAM is a component of IAM. It is only supported with Oracle SSO 10.1.4.x. The best solution would be to upgrade the Forms and Reports environment to either 11gR2 (11.1.2.1) or to the latest 11gR1 patchset 11.1.1.7. Both versions are compatible with OAM 11.1.1.7.0 and OID 11.1.1.7.0 where only Forms 11gR2 (11.1.2.1) is compatible with OAM 11.1.2.0 and OID 11.1.1.7.0. That would be the best solution as we have ran into configuration problems in the past with using Oracle SSO 10.1.4.x.
Since OID 11.1.1.2.0 is already installed, you should be able to patch it up to 11.1.1.7.0.
For user authentication in OID, it is required to have OAM or Oracle SSO as both products use WebGate or mod_osso agents for authentication and authorization. For purposes of allowing end users to register accounts and password reset, you will either need to also install another IAM component called Oracle Identity Manager (OIM) or create a customized SSO login page that can be coded to perform these actions. I believe there are some examples available on the Internet.
Thanks,
Scott
http://pitss.com/us
Similar Messages
-
SSO with OID and WLS 8.1 Web App
Hi,
I have a web application deployed on WLS 8.1.
I have set up Oracle Custom Authenticator.
Some of my users are stored in Oracle LDAP. I want that if user logs in Web Application deployed on WLS 8.1 and clicks on one link (in my web app) which refers him to go to OID interface, in OID interface he should not be authenticated again (as he is already authenticated by WLS). Please let me know how to resolve this issue with Oracle SSO.
Any help in this regard highly appreciated.
Thanks
-DeepakDid you find a solution for this problem?
I have somthing very similar going on where I am currently working.
Thanks!
Andy.
"Simple Guy" <[email protected]> wrote:
>
Hi,
I've a setup with iplanet 6.x webserver using the wls 7.0 sp2 proxy plugin
to
route requests to the clustered app server instances (2 of them) that
are in wls
6.1 sp3.
The issue is, I'm noticing that the session is not sticky and is getting
routed
onto the other app server instance. The error that I see in the wlproxy.log
is
as follows:
*******Exception type [PROTOCOL_ERROR] raised
at line 654 of URL.cpp
Thu Nov 13 11:30:08 2003 failure on sendRequest() w/ recycled connection
to Instance1:7001, numfailures=1
Thu Nov 13 11:30:08 2003 Marking Instance1:7001 as bad
Thu Nov 13 11:30:08 2003 got exception in sendRequest phase:
PROTOCOL_ERROR [line 654 of URL.cpp]: unexpected EOF
reading HTTP status at line 1010
Thu Nov 13 11:30:08 2003 Failing over after sendRequest exception
Thu Nov 13 11:30:08 2003 attempt #1 out of a max of 5
Has anyone seen this issue? Can anyone explain why this issue is occuring.?
Thanks. -
Is it Possible Oracle form 11g compatible with Oracle express edition (ORACLE XE) ??
See
www.oracle.com/technetwork/developer-tools/forms/oracle-forms-111210certmatrix-1886127.xls
as Oracle XE 11g is 11.2.0.1 this should work.
cheers -
Using jfreechart with oracle forms 11g
Hi everybody,
I'm using jfreechart with oracle forms 11g to continue having graphs in my application since i'm migrating from forms 6i. I've already got it working and it's great. Just have one problem left. I don't know how to change the axis labels. In Bar charts, it comes with "Values" in y axis and "Category" in x axis by default. I wanted to change that or make it dissapear. Anyone knows how to?I've never used the jFreeChart, but according to their website you can use the "setLabel" method to set the label for an axis. Check out Axis (JFreeChart Class Library) for more information.
Craig B-)
If someone's response is helpful or correct, please mark it accordingly. -
How to invoke crystal reports from Oracle forms 11g R2 along with passing p
How to invoke crystal reports from Oracle forms 11g R2 along with passing parameter to it.
how to pass parameters to crystal report, please help.how to pass parameters to crystal report, please help.This would entirely depend on crystal reports and you might find informations on crystal reports related communities more likely...I for one have seen crystal reports the last time about 12 years ago. And even back then I simply acknowledged it's existence instead of working with it.
Maybe crystal reports can be invoked via a URL call which would make it simple as you'd need simply build an URL and show the report using web.show_document. But that's pure speculation. Also you might not be the first with this requirement, so the solution to your problem might be right under your nose and just a little google search away ;)
cheers -
Is it Possible to connect oracle 10g with oracle forms 11g?
Hi,
I have installed Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 and Oracle 11g forms and reports....
My question is
Whether i can develop application using oracle forms 11g and using oracle 10g as backend connection......
If Possible then how to configure it......
Thanks.That would depend on the exact version of Forms 11g you are referring to;
this document: http://www.oracle.com/technetwork/developer-tools/forms/oracle-forms-111210certmatrix-1886127.xls
is for forms 11.1.2.1 and indicates database 10.2.0.4 is certified with this version of forms. For other Forms versions this might be different (I don't know as I didn't look it up).
You whould do the SQL*Net config like you'd do it on any other oracle client:
Tnsnames.ora - Oracle FAQ
Sqlnet.ora - Oracle FAQ
except for reports where in the opmn.xml the TNS_ADMIN variable is set for the reports servers; so you'd have to place your config files under $INSTANCE_HOME/config as well.
TNS ADMIN - Oracle FAQ
cheers -
Is it possible to use DVT with Oracle Forms 11g?
Hi,
I have posted my question on Oracle Forms forum but I didn't get answere regarding dvt usage in Oracle Forms.
Now I try it here.
Oracle Forms 11g and charts / graphs
====
one of our customers has a forms 6i applications including oracle graphics and is thinking about upgrade to forms 11g.
Oracle graphics has been desupported with 6i and with 9i Oracle BI beans has been recommended.
Forms 10g is the terminal version for Oracle BI beans too (http://www.oracle.com/technetwork/middleware/bbi-beans/overview/oraclebibeanssod2008-129560.pdf).
What's the recommended technology for graphs/charts in Forms 11g?
Is it ADF DVT?
If yes, are there examples how to call them from Forms 11g?
=====
regards
PeterHello Shay,
thank you very much for the link.
I wonder if there any plans from Oracle to provide and support a DVT wrapper in next versions of Oracle Forms 11g
As the customer project is planned for Q2/2011 we still have some time and hope for this :-)
regards
Peter -
Where and what to download if I like to use Oracle Form 11g
Hello all:
where and what to download if I like to use Oracle Form 11g
Thx in advance.hi
check out the following link.
Oracle Forms 11g available now!!
http://www.oracle.com/technetwork/middleware/weblogic/downloads/index.html
Re: Install Forms & Rpts 11.1.1.3 with WebLogic Server 10.3.3 on Win32
hope this helps u.
sarah -
Integrating EBS12 with OID and Oracle Single Sign-On
Hi All,
I recently installed EBS12 and followed all the instructions on metalink note 376811.1 to integrate it with OID and OSSO server.
At the end of integration to verify SSO integration with EBS12, when I access EBS login page via http://[host]:[port]/OA_HTML/AppsLogin, the following error message is displayed:
<< Start of Error Message>>
500 Internal Server Error
java.lang.NoClassDefFoundError
at oracle.apps.fnd.sso.AppsLoginRedirect.AppsSetting(AppsLoginRedirect.java:120)
at oracle.apps.fnd.sso.AppsLoginRedirect.init(AppsLoginRedirect.java:161)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.loadServlet(HttpApplication.java:2231)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4617)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4541)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2821)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:740)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
<< End of Error Message>>
Please let me know what can be the cause of this error?
Thanks,
ShyamPLease use NOTE.249669.1 How To Collect Apache and Jserv Debugging Details
You will collect more informations. -
Integrating Oracle Forms 11g with JavaScript - keystrokes support issues
This article
http://www.oracle.com/webfolder/technetwork/tutorials/obe/forms/11g/jsinteg/formsjsinteg/setup.htm
shows the JavasriptIntegration with Oracle Forms.
I am trying to navigate out of Oracle Forms Java Applet with separateFrame=false to access an external menu using JavaScript. I can't find a way to navigate out of Oracle Forms. My focus stays inside the currently opened form and the applet does not lose the focus.
I need to access any external UI component by shifting the focus form the Java Applet to that components using only key strokes.
Thanks for your helpVikas,
Sorry for the delay. I am still investigating this. In general, it would appear as I mentioned. If the form that contains the code specific to the event monitoring has not been run, then it cannot be executed. We are trying to get clarification on the definition of "scope" in this case. In the mean time, one alternative might be to subclass the related triggers/pu and include them in all of the forms where you want them to fire. Currently I am suspecting that scope refers to a relationship to forms currently running. For example if you have form A, B, and C running a scope of "form" might suggest that the events are only monitored if the current form includes the necessary code. However, if "application" then even if the form containing the necessary code is not the current form, the necessary code would fire anyway. Again, I am trying to get more clarification, but it is slow coming.
If this is truely an urgent issue, I encourage you to create a Service Request with Oracle Support. -
Oracle forms 11g , mailmerge errors WUO-712 and WUO-707
error
client_ole2.set_property(mm_obj, 'Destination', 0);
WUO-712 Unable to set Property: {0}; Exception: {1}.Type: UserDescription: WebUtil was unable to set the specified Property tothe specified value
client_ole2.invoke(mm_obj, 'Execute');
WUO-707 Unable to invoke Method: {0}; Exception: {1}.Type: UserDescription: WebUtil was unable to invoke the specifiedMethod
I migrated oracle forms 10g application to Oracle forms 11g.
One form uses mailmerge is failing. This options was working in previous 10g version using WinWord 2003.
Failing in current version Oracle 11g and Winword 2007
Three documents are invovled in the process
mailmerge_data.docx --- datasource document -- have address attributes
FOBSENT.docx -- template document
output.docx -- using mail merge options address are populated from mailmeger_data.docx into FOBSENT.dox and created a new output word document which we send it to customer.
------------------------------------------------------- WUO-712 and WUO-707
client_ole2.set_property(mm_obj, 'Destination', 0); -- 0 is value of constant wdSendToNewDocument
client_ole2.invoke(mm_obj, 'Execute');
Any help to resove this is apprciated.
Thanks in Advance
RaghavSorry I was away,
We migrated 10G forms to 11g also Winword 2003 to Winword 2007
It's erroring at this point
mm_obj := client_ole2.get_obj_property(template_doc, 'MailMerge');
Failing ---> client_ole2.set_property(mm_obj, 'Destination', 0); -- 0 is value of constant wdSendToNewDocument
Failing --->client_ole2.invoke(mm_obj, 'Execute');
Not able to read or open document use to work in previous version.
Raghav -
Use of Times ten database with Oracle Forms 11g
Hi,
We need to use some caching / pre-fetching solution with Oracle Forms 11g. Is there a possibility that Oracle Forms 11g can be used with Times ten database.
Regards,We have never tested TimesTen with Forms 11g but we suspect there are issues that may prevent if from being used.
Sorry.
Chris -
Dear Oracles,
I am facing problems while installing Oracle Forms 11g
I read many documentations - and follow many pages during installing - but the same error appears every time
I installed Oracle Web Logic Server wls1035_generic.jar perfectly, and then create a web logic domain through Fusion Middleware config wizard
and test the web server through
http://localhost:7001/console
http://img811.imageshack.us/img811/8558/consoleto.jpg
and then installed Oracle Forms and Reports 11g R2 using ofm_frmrpts_win_11.1.2.0.0_32 3 - Disks
I chose Install S/w only - it was installed successfully
then I opened Configure Classic instance and follow wizard
It stopped at creating domain
every time i try it.
with images to show my problem
http://img404.imageshack.us/img404/4131/ofmfrmrptswin11120032.jpg
Iam using win XP-32 bit with 2 GB Ram pc and Oracle DB 11g
and this is the Log
error part
[2012-11-07T22:17:59.937-08:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000JfUeR^Z8XrWjLxVK8A1GaorA000004,0] reportStartConfigAction: EXIT........
[2012-11-07T23:57:03.859-08:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000JfUeR^Z8XrWjLxVK8A1GaorA000004,0]
[2012-11-07T23:57:03.859-08:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000JfUeR^Z8XrWjLxVK8A1GaorA000004,0] [[
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3149)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3039)
at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:339)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
[2012-11-07T23:57:03.859-08:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000JfUeR^Z8XrWjLxVK8A1GaorA000004,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:339)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
]]In addition to Craig's feedback consider the following:
If you did not read the system requirements and installation guide, you likely will have problems.
http://docs.oracle.com/html/E25460_01/r2_fr_requirements.htm
<blockquote>1. Does your machine have a static IP address and/or the Windows Loopback adapter installed and configured?
2. You indicated that you have 2gig of RAM. This is the minimum requirement just to install the product. It is very unlikely that you will be able to comfortably use the product with 2gig of RAM. Likely the performance will be so slow that processes will timeout before they can successfully start. You can actually see this occurring already - look carefully at the log info you posted.
Further, if you are also attempting to run an 11g database on the same machine, this will never happen. Having only 2gig of RAM will never support running the DB and the components of FMw, and the Operating System.</blockquote> -
Showing Blank Records oracle forms 11g
Deal all..
i am using oracle forms 11g , i created a form by using data block wizard & layout wizard , but when i run the form, the form running successfully in browser, url is ( http://arun-pc:9001/forms/frmservlet), but it is showing empty records.
when i check with sql plus user Scott , i found 10 records in departments table , same user and same table i used in oracle forms.
i don't know what is the problem.. i am new to oracle forms please help me..
i am waiting 4r your valuable reply
thank s in Advance..Hello. Mr.harsh shah...
Thank u for your reply..
I follow the link what u given in above post.. But still i have the same issue.. i am not sure, but i think i have problem with my Environment, bcz in many blogs i read that oracle forms is not recommended to use with 64 bit OS. and second , iam not using developer suite 10g,
currently i am using,
operating system: windows server 2008 r2
weblogic server :- wls1036 (64bit)
JDK :- 7u17 64bit
Oracle forms :- 11g
and database in another host , just i edit tnsnames.ora file in forms directory. the following are my configuration options
Oracle Forms and Reports Installation
Configuration Options
Middleware Home Location: C:\Oracle\Middleware
Oracle Home Location: C:\Oracle\Middleware\Oracle_FRHome1
Oracle Instance Location: C:\Oracle\Middleware\asinst_1
Oracle Instance: asinst_1
Domain Option: Create Domain
Domain Name: ClassicDomain
Domain Home: C:\Oracle\Middleware\user_projects\domains\ClassicDomain
Domain Host Name: WIN-DMJUC51KRHF
Domain Port No: 7001
User Name: weblogic
Automatic Port Detection: true
Administrator Console: http://WIN-DMJUC51KRHF:7001/console
EM Console: http://WIN-DMJUC51KRHF:7001/em
EMAgent URL: http://WIN-DMJUC51KRHF:5155/emd/main
Forms URL: http://WIN-DMJUC51KRHF:8888/forms/frmservlet
Reports URL: http://WIN-DMJUC51KRHF:8888/reports/rwservlet
i check all the links above, all services showing running successfully.. but when i run the form , i dont fine any records , showing empty and blank records..
please give me clarification ...
Thank u very much..
Arun -
RE: Calling a Web service from Oracle Forms 11g
I wonder if anyone could please help with the following
We have a requirement for a real time communication between Oracles Forms (11g) and SAP over the RR LAN network.
This would require the need to send info to and receive info from SAP as it will be an on-line validation of a Part from an Oracle FORM to SAP (response less than 1 second).
What would be the best and easiest way to code this an Oracle FORMS trigger.
Thanks very much
Durjoy
tel 07790 495 626Hello,
<p>Did you read this paper ?</p>
Francois
Maybe you are looking for
-
I recently moves all my songs over to an external drive but couldn't access them from itunes. Thanks to responses from this forum I fixed that problem by moving the entire Itunes folder to the external drive. My problem now is that every single song
-
We recently acquired a used netra t1 105, but it's not doing us much good as it cannot boot. At the lom> prompt, typing "poweron" does indeed power it up, but that's it. It hangs at that point. It doesn't get any further...no memory checks, nothing.
-
Unix Command Disabled in Startup Items
I have a MaXtor One Touch II. After installing the software, during the Restart, Mac advised me that the security settings for an unknown (to me) file needed to be fixed or disabled. I disabled it and have now realised it was a UNIX command to watch
-
Cannot make a 'number' account on MacOS 10.6 (workstation)
Hi all, suddenly in MacOS X 10.6 the possibility to make an account named '00186' is giving me an error.. I get the warning that i cannot not use special characters.. (screen-shot: http://www.mactinosx.com/pica/sreenshot_account.jpg srry 4 the dutch
-
Hi Guru's, I would like to know ,How to pull the Data from Oracle tables to BW. tell me scratch onwards... regards sekhar ch