Oracle forms 4.5 corrupting others forms versions

Hi Friends,
I am using Oracle 6i and Oracle 10g forms and reports.
After installing Oracle Forms 4,5 when i try to open Oracle 6i or 10g forms i am getting the error
Message file \ORANT\DBS\FMCUS.MSB not found.
but the file is avaialble in the mentioned location.
Please suggest the Fix.
Regards,
Arun

Arun,
The only way to install Developer 2000 (Forms 4.5) and any other version of Developer on your computer is to install Dev2K first. Dev2K does not recognize the Oracle Homes technology so it will install, by default, into the Oracle DEFAULT HOME. In you case, unfortunately, this means you will have to uninstall and remove all traces of all installed Oracle products (this includes the Windows Registry) and then reinstall. As a rule of thumb, you should always try to install Oracle products from "Oldest" to "Newest". Developer Suite 5 and above supports Oracle Homes technology, so once you have installed Dev2K, install Developer 6i. Make sure you change the Dev 6i HOME during setup or will have the same problem you have now.
Hope this helps.
Craig...
If this or another suggestion is helpful, please mark it accordingly

Similar Messages

How to encrypt the text in password field in Oracle Forms version 6i

Need help!
How to encrypt the text in password field in Oracle Forms version 6i?
one way is to change the settings in the property palette. Can somebody provide me some script to be run while the form is running which will enable the password to be encrypted?
Thanks!

Hello,
Do you mean "hidden" (replaced with stars) or encrypted (that needs to be decrypted ?
Francois

Can't open Oracle Form(version 9.0.4)

Can't open Oracle Form(version 9.0.4) because show alert FRM-18122: Form Builder Debugger failed to Initialize.

Found in metalink:
"Set the CLASSPATH to the FORMS90_BUILDER_CLASSPATH did resolves the problem or look that the FORMS90_BUILDER_CLASSPATH is shorter as 512 Characters"
I don't know if this applies to your problem, but if you seeking for more info see Note:199175.1.
Regards,
Marcos

Oracle Report and Oracle Form Version supported by Oracle Enterprise 10gR2

Dear support,
Would you please advise me on the version of the following product supported by Oracle Enterprise Edition 10gR2?
1. Oracle Report
2. Oracle Form
Thanks.
Kan Fok

Hi,
I think Reports 6i has the option to create character delimited output, which can be used for Excel imports. In Reports 9i the ability to add a mime type that opens Excel directly was added
Frank

Calling webservices in Oracle Forms version 6.0.8.26.0

Hi,
I am trying to call a webservice from Forms version 6.0.8.26.0. I have created the jar file using JDeveloper 9.0.3.1. I could import the class in forms but when I compile the form, it gives me the following error:
Error 306 at line 13 column 13
wrong number or types of arguments in call to NEW_OBJECT
Error 0 at line 13 column 5
Statment ignored
Error 306 at line 19 column 13
wrong number or types of arguments in call to GET_STRING_FIELD
Error 0 at line 13 column 5
Statment ignored
and so on....
Please advise what I need to do? This version of forms does not have any default.env. So I'm not sure if there is any other path where I need to put in the jar file path. Please advise soon.
Thanks to all in advance.

Please can somebody reply....

Oracle Forms version

We have a production system build by oracle forms builder 10.1.2.0.2 .
The background database is oracle database 10.2.0.1.0.
Now we want to upgrade database to oracle 10.2.0.2 .
If we upgrading databse , would the system be effect , even not work ?
Thank you.

Hi,
Check out this link
http://www.oracle.com/technology/software/products/ias/files/as_certification_r2_101202.html
in that see table 4 and 5.
Regards

How to find Oracle form version number at runtime in Form 6 webform

hi ,
i developing form at offshore , form server is running at somewhere in UK.
i am running form from development PC , can i find out exact form version number at runtime with some code?
Thank u

Beginning with Forms 6i you can use GET_APPLICATION_PROPERTY(VERSION).

Using SYS_EXTRACT_UTC function in Oracle forms version 9

Hi,
I would like to use the function SYS_EXTRACT_UTC in forms but I get an error 201:
identifier 'SYS_EXTRACT_UTC' must be declared.
How can I use this function? do I need any library or something?
Thanks

You can try creating a wrapper database procedure for this and call the procedure
from forms. It should work
Rajesh

Host('sqlldr') is not working in oracle forms 10g

oracle database version:10.1.2.0
oracle forms version:10g
client ans server are on the same machine.
when i am trying to load the file in to oracle,i wrote the when-button-pressed trigger as
host('sqlldr');
when i run the form its not giving any result.
i tried by using batch file also itn is giveing the error like
message 2100 not found

What happens when you run "SQLLDR" from a command window? It sounds like the directory where the SQLLDR executable is located is not in your PATH. You can either add it to your path or fully qualify the path to the executable as Christian suggests.
Craig...

DB Trigger firing issue in case of oracle forms session crash

Hi All,
Oracle DB version: Oracle Database 10g Release 10.2.0.2.0 - Production
Oracle Forms version: (Oracle Developer Suite 10g) 10.1.2.0.2 Production
I am entering some data in the oracle forms and committed the data to database. This form is still open.
By some reasons i get a error as "FRM-92101: There is error during forms server startup" and the forms session gets crashed.
When this event happens i wanted to update the records which are inserted before this error occurred. For this purpose i created a BEFORE LOGOFF ON DATABASE trigger (in SYS user) and declared that transaction as autonomous and performed update and then commit.
But when i get this error in forms runtime session, this trigger doesn't fire and also the records don't get updated.
If i query to v$session view, the session entry is gone because the forms session is crashed.
Can anyone please tell me why this trigger don't get fire when oracle forms session gets crashed? Or is there is any other way to run update statement as soon as the forms session gets crashes?
Thanks.

Hi,
please check java runtime console for more issue information.
Windows:
SystemControl->Java Plugin Ver XXXX -> Standard -> Check "Show Java Console"
In Systray, check the console for information about errors in java after the form error.
Attackwave

Is there any way to set a calendar event in MS Outlook from Oracle Forms

I need to set and delete events in MS Outlook from an Oracle Form (version 10gR2).
Is there any way to accomplish this?
Thanks

You will need to use OLE on the client, which would further require the use of WebUtil. Here (below) are a couple of MS examples that you would need to convert to pl/sql. There are a variety of Oracle notes which discuss reading and writing to MS Word and Excel. These can likely be used as a starting place to talk to Outlook. There is a WebUtil demo which includes an example of how to write to MS Word. It can be found on the WebUtil home page:
http://www.oracle.com/technetwork/developer-tools/forms/webutil-090641.html
<li> http://support.microsoft.com/kb/160502
<li> http://support.microsoft.com/kb/170262

Selecting only time in oracle forms

Hi all,
like date picker in oracle forms can i select the time in oracle forms into a text item.
i want to display the time in this format 10:10:30 a.m. and also i want to insert into the table
i have taken the data type of this column as varchar2(15) if i take date can i insert the time or varchar2 is ok.
my oracle forms version is 10g.
please reply...

Hi, extreme
extreme wrote:
Hi all,
like date picker in oracle forms can i select the time in oracle forms into a text item.
i want to display the time in this format 10:10:30 a.m. and also i want to insert into the table
i have taken the data type of this column as varchar2(15) if i take date can i insert the time or varchar2 is ok.Better take column having data type date. You can insert date and time in the date field.
Just you need to change in forms.
Change the Data type Date to Datetime
to show only time, use format mask.
Hope this helps

Oracle Form functions and procedures in APEX, how?

I am working to recreate in APEX, already existing Read Only Forms in Oracle Forms. APEX Interactive Report functionality among other things, makes it worth while as well as targetting a different audience than the one that utilizies the Oracle Form versions. Oracle Forms versions use lots of pre and post query triggers, PLSQL Functions.
In Oracle Forms one of the places those functions can be located is in the "Program Units" section of the Form. A typical function of this sort, based on a specific Mission ID Itinerary, collects scheduled passengers last names, formats them with a comma and space after each one, into a single string that is returned and displayed as the passenger list of one row.
I have all this code written so I can move most of the main query of the Oracle Form into an Interactive Report. These functions and triggers called from within the Form, from the "Program Units" section of the Oracle Form rather than being stored in the Database schema in a package, where would they go inside APEX? Can I create a "Shortcut" in APEX and call it from the Interactive Report "Region Source"? Can I create the PLSQL function at the page level or region level of the Interactive Report? Or, is my best bet creating a package stored in the database, of all these functions and/or proecedures I may need from the original Oracle Form?
Some advice would be greatly appriciated.

RLBickham wrote:
I don't think I have been clear enough in describing the specific thing I want to do, it simply does not reach the level of forms to APEX conversion. It is basically a PLSQL Function problem.
I have an Interactive Report that is currently getting 90 percent of what I want however, each row, representing a Mission may have multiple legs. Each Leg has two locations or ICAO codes attached to it. Based on the Mission number, I want to loop through the leg table, collect all the ICAO codes for that Mission, put them all into 1 variable separated by a coma and add that variable to the column display of that Interactive Report as the last column.
In Oracle Forms I have a function saved to the database that is called within the main query. Maybe I am asking a question that does not need to be asked but in any case my question is can I put that function currently in the database somewhere in the confines of the Interactive Report and reference it via Http somehow or should I just stick with putting functions and procedures in packages stored in the database and called the conventional way?You could move the function to the database and call it from the report query, but it sounds as if it's superfluous. In the report query use whatever form of Re: 4. How do I convert rows to columns? is appropriate to your (unspecified) database version.
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.

Make an hierarchical Tree in oracle Forms 6i

Hi everybody,
I want to make an hierarchical tree. I work in Forms 6i
I create one non database block e.g. 'Bloc2' then
add hierarchical control item in that. e.g 'Menu'.
I create a record group named 'RG_DATA_TEST'
Before I use a table in this record_group.
I want a tree as this :
- Menu1
Menu1 option1
Menu1 option2
- Menu1 option3
Menu option3 Sub opt 3
+ Menu2
the table 'Menu_tree' is described' :
CREATE TABLE MENU_tree
ID NUMBER(5),
LABEL VARCHAR2(128 BYTE),
ICON VARCHAR2(40 BYTE),
MASTER NUMBER(5),
STATUS NUMBER(1) DEFAULT 1,
VALUE VARCHAR2(128 BYTE)
Here the data in the table :
INSERT INTO MENU_tree ( ID, LABEL, ICON, MASTER, STATUS, VALUE ) VALUES (1, 'Menu1', 'mainmenu', NULL, 1, NULL);
INSERT INTO MENU_tree ( ID, LABEL, ICON, MASTER, STATUS, VALUE ) VALUES (
2, 'Menu1 Option 1', 'optionmenu', 1, 1, 'Dialog11');
INSERT INTO MENU_tree ( ID, LABEL, ICON, MASTER, STATUS, VALUE ) VALUES ( 3, 'Menu1 Option 2', 'optionmenu', 1, 1, dialog12');
INSERT INTO MENU_tree ( ID, LABEL, ICON, MASTER, STATUS, VALUE ) VALUES (4, 'Menu1 Option 3', 'optionmenu', 1, 1, NULL);
INSERT INTO MENU_tree ( ID, LABEL, ICON, MASTER, STATUS, VALUE ) VALUES ( 5, 'Menu1 Opt 3 Sub Opt 3', 'suboptionmenu', 4, 1, 'Dialog131');
INSERT INTO MENU_tree ( ID, LABEL, ICON, MASTER, STATUS, VALUE ) VALUES ( 6, 'Menu2', 'mainmenu', NULL, -1, NULL);
INSERT INTO MENU_tree ( ID, LABEL, ICON, MASTER, STATUS, VALUE ) VALUES ( 7, 'Menu2 Option1', 'optionmenu', 6, 1,'Dialog21');
The record_group use this instruction SELECT :
SELECT STATUS, LEVEL, LABEL, ICON, VALUE
FROM MENU_tree
CONNECT BY PRIOR ID = MASTER
START WITH MASTER IS NULL
And At the trigger When_new_form_instance , i do this code :
DECLARE
htree ITEM;
V_IGNORE number;
BEGIN
HTREE := FIND_ITEM('BLOC2.MENU');
V_IGNORE := POPULATE_GROUP('RG_DATA_TEST');
FTREE.POPULATE_TREE(htree);
END;
When i run the forms, It don't give me a structure of node.
It give me only a icon with two arrows.
Where is the problem ?
Must I add code somewhere ?
Help me for your ideas.
Regards.
Edited by: 794982 on 17 sept. 2010 04:55
Edited by: 794982 on 17 sept. 2010 05:01
Edited by: 794982 on 17 sept. 2010 05:04
Edited by: 794982 on 17 sept. 2010 05:06
Edited by: 794982 on 17 sept. 2010 05:13
Edited by: 794982 on 17 sept. 2010 05:19
Edited by: 794982 on 17 sept. 2010 05:23

Ok Francois Thanks for your response.
Just I pricise i work with oracle forms version 9.0.4.0.19 .
But I am putting this code in trigger When_New_form_Instance but it didn't work.
When I execute it just shows a line with two arrows but not a real tree.
Then I do a block-non based and a elemnt with type hierarticall tree and a canevas.
and i create a record_group. and in a palette property of the element i precise the canevas and the record_group
I don't khnow where is the problem ?
Any other suggestion ? please
Regards.

Oracle form 6i in client server mode to call web service

Hi,
I am using oracle form 6i running in client server mode. My database version is 8.1.7.4. Now I am required to call an external web service. Is it possible to call web service without the existence of application server or web server? Please help!

I have tried the method illustrated by the Form 10g Demo. However, when I select the Import Java Classes from the pull down menu, I have got the following error:
PDE-UJI002 Unable to find the required Java Importer Classes.
My Oracle Form version is as follows:
Forms [32 Bit] Version 6.0.8.19.2 (Production)
Oracle8i Enterprise Edition Release 8.1.7.0.0 - 64bit Production
With the Partitioning option
JServer Release 8.1.7.0.0 - 64bit Production
Oracle Toolkit Version 6.0.8.19.1 (Production)
PL/SQL Version 8.0.6.3.0 (Production)
Oracle Procedure Builder V6.0.8.17.0 Build #863 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle Query Builder 6.0.7.1.0 - Production
Oracle Virtual Graphics System Version 6.0.5.38.0 (Production)
Oracle Tools GUI Utilities Version 6.0.8.11.0 (Production)
Oracle Multimedia Version 6.0.8.18.1 (Production)
Oracle Tools Integration Version 6.0.8.18.0 (Production)
Oracle Tools Common Area Version 6.0.8.18.0
Oracle CORE Version 4.0.6.0.0 - Production
Please help !

Can I use Oracle Forms Services 11g with Database 9.2.0.8.0?

Hi everyone.
My department is evaluating development tools in order to build new web applications, and also possibly to migrate current applications buit with Oracle Forms 6.0.5.34.0. Our database is Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit.
We have read that the newest Oracle Forms version is Oracle Forms Services 11g. Is Oracle Forms Services 11g compatible with Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit? or would we have to migrate our RDBMS to Oracle 11g?
If our database is compatible, what would we need to develop and deploy applications with Oracle Forms Services 11g?
Many thanks in advance.

Wheter it's compatible or not: Database 9.2.0.8 is in sustaining support which means you won't get patches for it. So even if it is compatible I'd opt to upgrade to a newer version, as I wouldn't feel comfortable having a not-supported product out in production.
Have a look at the certification matrix for supported configurations
http://www.oracle.com/technetwork/middleware/downloads/fmw-11gr1certmatrix.xls
As for the requirements; most things can be found on the forms homepage on OTN:
http://www.oracle.com/technetwork/developer-tools/forms/
or at the documentation:
http://download.oracle.com/docs/cd/E17904_01/index.htm
cheers

Oracle forms 4.5 corrupting others forms versions

Similar Messages

Maybe you are looking for