Oracle forms 6i (Pentium 4, Win98) "Can not install"

I have a "customized" Oracle interface that was created in Oracle forms 6. I have successfully used this form on Windows 95 Clients but now I must switch to a Windows 98 O/S on a Pentium 4 machine. I actually had to download a special Oracle Installer to install the 8i Client, but I now need to load a newer version of the Forms "run-time" and can not install it from the 6i forms download. Any suggestions would be more than appreciated.

Forms 6i installation in Windows98 should not give any trouble. Hope you
have checked the memory. You should have 128MB memory to install
Forms6i. In Runtime you may not actually require that much of memory but
to install you reuire that (Please see Hardware requirement for Form6i).

Similar Messages

Can not install Oracle 9i R2 on Windows 2000

I can not install Oracle 9i R2 on Win 2000. It failed at 48% with this message.
Error in writing to file C:
\oracle\ora92\oem_webstage\oem_webstage_8.jar
I tried by copying the 3 disks to my hard drive and reinstall but not success.
Help me please.
Thanks
Ken Wongho

I've been able to install 9iAS on Windows 2000 - I have the Origin database on a Solaris machine.
Your best bet is to have all 3 folders Disk1/Disk2/Disk3 on your computer and the run the install from there. I didn't have the disk space on my computer and ran it from a shared drive.
I'm currently in the post install section trying to Configure cache, and wondering if it's still working or hung up.
The 9iAS Installation took 3 1/2 days to run - I have a 300 Mhz PC with about 380 RAM. The Cache Configuration has been running for over 26 hours.
I don't know if this helps but I hope it does.
I didn't experience any of the problems you have.
Hope this helps

Can NOT install Standard ONE on a 2 quad-core processor machine (licensing)

This is from Oracle's licensing (July 2009):
===================================
“When licensing Oracle programs with Standard Edition One or Standard Edition in the product name, a processor is counted equivalent to a socket. However, in the case of multi-chip modules, each chip in the multi-chip module is counted as one occupied socket.”
This is also from Oracle's licensing (July 2009):
=====================================
“Oracle Database Standard Edition can only be licensed on servers that have a maximum capacity of 4 sockets. Oracle Standard Edition One may only be licensed on servers that have a maximum capacity of 2 sockets.”
Now, this is what it seems to be:
===========================
1 quad-core AMD/Intel Xeon chip counts as 4x0.5=2 sockets (reached the maximum capacity limit in the licensing terms) by simply using 1 (single) quad-core CPU box.
and that's it - you can NOT install Standard Edition ONE on a 2 quad-core CPU Linux box :(((((
For a AMD/Intel multi-core Linux boxes
===============================
it can be a single quad-core CPU box (4x0.5=2 sockets -- but, paying twice the processor license - because it is now 2 sockets) or
it can be a 2 dual-core CPU (2X2x0.5=2 sockets -- but, paying twice the processor license) or
it can be a single dual-core CPU box (2x0.5=1 -- paying only a single processor license)
I think it is time for Oracle to revisit the licensing terms for Standard ONE edition and change it to simple socket count (don't count the cores). It is getting more expensive to use Oracle Standard ONE.

zaferaktan wrote:
Everybody should also know - and OPN folks confirmed this morning - that an Oracle Sales person does not have the "legal" authority to overwrite what is written in OLSA. Sales can not rewrite the OLSA. However, Sales can request changes or addendums to the specific contract, which are reviewed by Oracle Legal and approved by Sales senior management (right up to Charles and Larry if needed).
That said, very few Oracle employees are allowed to discuss any aspect of licensing terms. The official first point of contact is Sales, and they may only be the carrier pigeon of missives from the authority.
When someone buys Oracle, OLSA is the only legally binding document. Everybody should keep the copy of the OLSA which is in effect at the time of their purchase, given that OLSA can be modified at a later date from the actual purchase.That happens to be true of any license or sales agreement, from Oracle or not. Also note that if you purchase support, renewals may affect the original OLSA.
And it's one of the reasons old timers in these forums (such as Dan and myself) will prefix nearly any license discussion in the forums with "check with sales" and suffix it with "and anything you hear on the internet is probably useless in a court of law when you get audited".
and after all that - thanks for digging into the details and posting them.
(With the warning to any others using the information that the facts need to be reconfirmed for each individual case and date. A judge usually frowns on a defense of "It happened to a friend of a friend of mine" or "I read it on the internet")
Edited by: Hans Forbrich on Sep 8, 2009 9:43 PM
By the way - what you write is a change of policy. At one time, a box that could support 4 CPU but only had 2 CPU installed would not qualify for SE1. Good news indeed.

I CAN-NOT install anything from a .pkg

i CAN-NOT install anything from a .pkg
i need help
someone
when i try to install i get this at the end
"there were errors installing the software"
"please try installing again"
also in disk utility
i get this
"invalid file or directory ID found"
"the volume HD needs to be repaired"
"Error: the underlying task reported failure onn exit"
and when i try to repair it from the MAC OSX disk i cant
i get
"Error: the underlying task reported failure onn exit"
also i cant install the BSD as it is a .pkg
HELP
Mac mini Mac OS X (10.4.5)

Hi, shoaib.
You wrote: "also in disk utility i get this
"invalid file or directory ID found"
"the volume HD needs to be repaired"
"Error: the underlying task reported failure onn exit""The disk directory of your hard drive is corrupted. This is the source of your problems.
If you cannot afford either of the third-party utilities:
• Alsoft Disk Warrior 3.x (DW3)
• Micromat TechTool Pro version 4.1.x (TTP4).
then you will need to follow the instructions in "Disk Utility reports 'Underlying task reported failure' when repairing a volume."
Specifically, given that your attempt to repair the disk using Disk Utility from your Tiger DVD failed, there are no other solutions available for this problem other than:
• Attempting repair with the third-party disk utilities cited above.
• Backing up whatever data can be saved, then reinstalling Mac OS X with an Erase and Install.
See the article I cited above for details. Sorry to be the bearer of bad news.
To avoid having to reinstall in situations like this, as funds permit you should consider investing in:
• Implementing a comprehensive backup and recovery solution. For advice on the backup and recovery solution I employ, see my "Backup and Recovery" FAQ.
• Alsoft DiskWarrior and TechTool Pro.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

I can not install 10g,tell me about that

on my computer i have a developer home,of course we have database home on the server(not on my computer) and by net8 we connect to database normally(database is 9i).
now i want to install oracle 10g database that i downloaded from oracle site,on my local computer.
but when it dispaly database configuration page ,message me about Net8 connection, so it can not make database for the first time.
would you please help me about this problem?
thanks
haf

cristianefromriodejaneiro wrote:
I can not install adobe flash player
Correct.
You cannot load Flash on your iPhone.

Can not install Database Oracle8i (8.1.7) for Windows 2000/NT

I am not sucessfull in installing (Downloaded Unzipped then copied to CD) both version of Database "Oracle8i Release 3 (8.1.7)" Enterprise and Standard edition for Windows 2000/NT". After the start->run->autorun the CD spins for a minute then nothing happens. I tried running other files as well such as setup and install but still doesn't do anything.
Read the Installation document but can not find the answer, need help from anyone (Oracle expert to non-expert) is greately appreciated.
Server name = I am using Windows2000 "local" server.
Date/Time = Happened yesterday and today (March 3-4/2002)
Browser + Version = Microsoft Internet Explorer 5.0
O/S + Version = Windows2000 version 5.0
Error Msg = None (Will not install)
################################################################T
Thanks...

I am having the same problems!
Any help here would be great!! Stephen, Hi!, I think I know what the problem is....but I need your confirmation on my hypothesis. These are the scenarios:
PC#1
=====
In this computer it has operating system Windows2000 on C: Drive.
RESULT: SUCESSFULLY INSTALLED THE ORACLE 8I (8.1.7) Enterprise or Standard (trial version) on this PC.
PC#2
====
In this computer it has operating system WindowsME on drive C:
RESULT: When CD (Oracle 8i) was inserted on the CD Drive autorun was performed and Oracle 8i Installation screen pops up and I clicked on install and the Universal Installer shows up. A positive sign but I purposly aborted the installation.
PC#3
====
In this computer it has (2) operating system they are: Windows ME on Partitiion C: and another partition on F: the operating system is Windows2000. I Tried to install it on Windows2000 on partition F:
RESULT: CAN NOT INSTALL (trial version) ORACLE 8I (8.1.7) Enterprise or Standard version on F: Windows2000.
CD drive just spins for 15 seconds and nothing happens not even the Oracle Installation screen shows up.
MY HYPOTHESIS:
=============
The ORACLE 8I (8.1.7) Enterprise or Standard trial version either:
A) Can not be installed on another drive other than C: with a system with two (2) operating systems. and/or
B) Can not be installed with a PC with two (2) operating system.
Ben

Can not install device driver in Windows 8.1

I can not install driver of my webcam(Odyssey OD 202) windows 8.1 (upgraded from windows 8)
The USB webcam is shown in Device manager.
When I attempt to update driver and search for it automatically it shows the following message.

Hi Atanu Barai,
There may be a compatibility issue between the Microsoft driver and the device . I agree with ZigZag ,you may need to download the driver from the manufacturer website .Please pay attention to the compatibility ability issue with the
Windows 8.1 when you try to download the driver.
If the issue persists, try to plug in the device with another USB port to have a check .To verify whether it is caused by the USB controller ,we can try to connect another USB device to have a check.
Meanwhile ,please check the Event Viewer for related information.
Best regards

Can not install Ovi Store Nokia 603

can not install shop. Tried to install four different versions, including misrepresented and that you download the browser when they click the icon.
At the end of the installation says: "Installation not possible"

Download this CWRT file to microSD card. Turn phone off insert in phone turn on. Then browse to CWRT file run. Then open up web browser go download ovi store file install. All fixed.
Note:
Make sure to install CWRT file in C:\ when prompt. This will not get lost when phone get reset.
Attachments:
CWRT Core 1.00(11124).sisx ‏810 KB

Can not install powerdvd10 on B540 which was uninstall accidently

Can not install powerdvd10 on B540 which was uninstall accidently. When I try to install from downloaded exe. file
there was error message "This software can only be installed on a lenovo system"

hi DILIPDKJ,
Just to verify, is this the PowerDVD software that you're trying to install?
PowerDVD 10 BD
v10.0.3029.52
IN12STW153WW5.exe
114 MB
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

I can not install the newest version of iTunes because of a file that can not be found. This is what I am seeing:(The feature you are trying to use is on a network resource that is unavailable. C:\......\Application Data\Apple\Apple Software Update\

I can not install the newest version of iTunes because of a file that can not be found. This is what I am seeing:(The feature you are trying to use is on a network resource that is unavailable. C:\Documents and Settings\Aubrie\Local Settings\Application Data\Apple\Apple Software Update\)

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page).
http://majorgeeks.com/download.php?det=4459
Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

I can not install apps in my new ipod touch ios 6

i can not install apps in my new ipod touch ios 6
it is showing appication is failed to installed
why is this happening
can any one help me....

The problem is when i drag n drop downloaded apps from torrentz into itunes n syncronize it add those apps into my itouch ... but the message shown in my i touch is .. that application failed to install..
in the itunes those appliacations are unchecked automatically ... but i can install apps which are downloaded from the istore .... they are working properly
but the ones i downloaded from the torrentz are not getting installed..

I have lost my iMovie program and I can not install a new one. My computer says that it is not possible to download anything on my main drive

I have lost my iMovie program and I can not install a new one. My computer says that it is not possible to download anything on my main drive

How full is your drive? You need at least 10/15% of free space.

OS 10.6.8 on documents created by Pages 3 will not open They want a Version 4 while my iMac does not install because it needs 4 Pages 10.7. But I can not install 10.7 because my iMac is not Core2 duo ... Funny dilemma!!

OS 10.6.8 on documents created by Pages 3 will not open
They want a Version 4 while my iMac does not install because it needs 4 Pages 10.7. But I can not install 10.7 because my iMac is not Core2 duo ... Funny dilemma!!

You should be able to Save as: iWork 08, but i don't know how it works on Mountain Lion. On my Snow Leopard the Save as window has a part looking like this
Or you can send me the document if you are in a hurry and I save it as iwork 08 for you. Click on my blue name and you'll find my address.

I can not install Windows 7 By applying Boot Camp

Hi
I have a problem
I can not install Windows 7
By applying Boot Camp
I have a message appear
Boot Camp does not support installing Windows on this Mac.
Boot Camp does not currently support installing Windows on a Mac with a 3 TB hard drive.
Hardware
3.4GHz Quad-core Intel Core i7, Turbo Boost up to 3.9GHz
32GB 1600MHz DDR3 SDRAM - 4x8GB
3TB Fusion Drive
NVIDIA GeForce GTX 675MX 1GB GDDR5
Apple Magic Mouse + Magic Trackpad
Apple Wireless Keyboard (English) & User's Guide
Accessory Kit
Software
iLife '11
OS X Mountain Lion
Apple did not you tell me about this problem at the time of purchase
Is there a solution to the problem ?

Unfortunately, I can not partitioning Alhardsk such manner described Palmqal
http://im32.gulfup.com/mGuB1.jpg
http://im36.gulfup.com/hLrW1.png
http://f.cl.ly/items/04323L1k173F1r2h0v3b/Screen%20Shot%202013-01-30%20at%203.56 .21%20PM.png
Is there another application that divide Alhardsk ?

In which boot camp support software I can install the drivers for win 7 32 bit.my os is X10.8.5 and I install windows 7 32 bit but I can not install drivers

in which boot camp support software I can install the drivers for win 7 32 bit.
my os is X10.8.5 and I install windows 7 32 bit but I can not install drivers.
also my macbook pro model is MC723.

Read this. You need to be running Snow Leopard or later.
http://support.apple.com/kb/ht3986

Oracle forms 6i (Pentium 4, Win98) "Can not install"

Similar Messages

Maybe you are looking for