Oracle forms designer has stopped working

oracle forms designer has stopped working
I trye open form when I open it,show me mag oracle forms designer has stopped working abd when I press cancel it exit from the forms
I used oracleform 10g with windoes7
any help ??

Gauthier Ooms wrote:
We've had similar problems in the past, but found a working solution (using this + other forums):
1. Install Oracle DevSuite 10.1.2.0.2
2. Install Patchset 5983622 to upgrade DevSuite to version 10.1.2.3 (this upgrade is needed in order to do step 3)
3. Install Patchset 7047034 to fix the crashing problem in the Forms Builder. (installation instructions are provided in the patchset)Issue no 3
from Patchset 7047034 readme file..
3.1 Platforms and Components for Patch 7047034 for Oracle Database Release 10.1.0.5How this patchset goes with the form Builder?
But according to THIS link.. It works ;)
Hamid

Similar Messages

Error: Oracle Forms Designer has stopped working

I have read a lot of different responses regarding this and related issues but none of the answers seem to be relative to my specific problem. Here is what I have done so far:
a. I just finished loading Oracle 11g 64x enterprise on my laptop running windows 7. It loaded correctly and I was able to import my 10g data dump and set up my schema.
b. I then installed the Oracle development suite: ds_windows_x86_101202_disk1 and disk2. There were some minor issues regarding compatibility but following the advise of one post, I checked the blocks in question and the software loaded fine.
c. I also attempted to install the p5969392_10123_WINNT.zip file but it gave a message indicating that no updates applied. (I am not sure if this is the correct patch or not?)
d. I also had to download and install the Sun SDK, v6.18.
e. I also updated the ORACLE paths in the default.env and registry entries and tried different urls in the runtime preference block. Nothing helped and I stayed with the default.
Oracle Forms seems to startup correctly and I am able to connect to the database with no problem. Although I did not build a new form completely, it appears that this would be no problem.
The problem:
The problem is that when I attempt to open a form that was previously developed in 10g on XP, I immediately get the "Oracle Forms Designer has stopped working" error and Forms Builder shuts down. I get the same error whether I attempt to open a library, menu, or form.
I have tried changing the compatibility mode from XP, service pack 3 (the default after install) to XP, service pack 2 but it made no difference.
If anyone has been able to work through this issue, please let me know how. Thanks

Gauthier Ooms wrote:
We've had similar problems in the past, but found a working solution (using this + other forums):
1. Install Oracle DevSuite 10.1.2.0.2
2. Install Patchset 5983622 to upgrade DevSuite to version 10.1.2.3 (this upgrade is needed in order to do step 3)
3. Install Patchset 7047034 to fix the crashing problem in the Forms Builder. (installation instructions are provided in the patchset)Issue no 3
from Patchset 7047034 readme file..
3.1 Platforms and Components for Patch 7047034 for Oracle Database Release 10.1.0.5How this patchset goes with the form Builder?
But according to THIS link.. It works ;)
Hamid

Oracle Forms Runform has stopped working

OS: Windows 7
Oracle forms 6.0.8.13 executables were running fine on Windows 7 upto Nov 19th. But after Nov 19th whenever we enter user name, pssword, database and hit connect, it gives oracle forms runform has stopped working error. Following is the Problem Signature.
We installed Oracle Forms Developer on that system to troubleshoot. But when we tried to connect to database in forms developer, it crashed with the similar error.
We installed Oracle 11g to see if we can connect via SQL*Plus to database and we are able to connect to DB using SQL*Plus.
Problem signature:
Problem Event Name: APPCRASH
Application Name: ifrun60.EXE
Application Version: 6.0.8.7
Application Timestamp: 39b8f14e
Fault Module Name: ifrcm60.dll
Fault Module Version: 6.0.8.7
Fault Module Timestamp: 39b8f126
Exception Code: c0000005
Exception Offset: 000545a6
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 7c35
Additional Information 2: 7c358db5d163bf5f4e4e8698a5d484d5
Additional Information 3: 94ec
Additional Information 4: 94ec13cd925e73cbf3d1857c0484307f
Please help!
Thank You!

Welcome to the Oracle Forums. Please take a few minutes to review the following:
<ul>
<li>Oracle Forums FAQ
<li>Before posting on this forum please read
<li>10 Commandments for the OTN Forums Member
<li>How to ask questions the smart way
</ul>
Following these simple guidelines will ensure you have a positive experience in any forum; not just this one!
We installed Oracle 11g What is this ? 11g is database ? If yes it is 11 XE or what version ..?
By the way, if you install 11g XE edition, it will not work with Oracle forms 6.0.8.13.
Hope this helps
Hamid
If someone's response is helpful or correct, please mark it accordingly.

Oracle Forms Designer has encountered a problem and needs to close

Dear All,
I got the following error when I compile the form,
Oracle Forms Designer has encountered a problem and needs to close
I am using Oracle 10g Developer suite(Forms 32 Bit Version 10.1.2.0.2)
and Oracle Database 10g Enterprise Edition Release 10.2.0.3.0
and Window Xp Professional 32 Bit Operating system
Now I can't do any changes in the form.
I searched lot of oracle forums .but i can't solve it.
Please give me one solution
I am strugling this issue.
Please help me........
a lot of thanks in advance.
Thanks and Regards,
Fazil

Hi,
I am doing the bug fixing in the existing form.Its size is 4.07 MB.when i will get the mentioned error.then i will take previos fmb.then again doing the changes after some time agin will come the mention error.I added some if else condtion code.Its a small code.I think its not a reason for the mentioned error.I think something is happended.I don't know what happened?
Please help me..
Thanks and Regards,
Fazil

Oracle Forms Designer has encountered a problem need to close

Hi,
When I try to connect Oracle 11g Database(Release 1) through Oracle Forms 6i, I get the following error
*" Oracle Forms Designer has encountered a problem need to close.We are sorry for inconvenience "*
Kindly help me out with a solution.
With Regards,
Abul

See Implementing Chinese language in Oracle 11g

Oracle sql*plus has stopped working ?

During creation of database in oracle 11.1.0.6 using database configuration i am getting following error
oracle sql*plus has stopped working
any solution?

Sorry ,we r getting the error while installation?
May be this can help
SQL*Plus won't start: Instant client 10.1 on Solaris 10

Reposting External Form Data has Stopped Working

Hi,
Admittedly, I have not kept up with the release notes, but has anything changed in the process of reposting external form data to Eloqua? I have three .Net applications that were working up until a couple of weeks ago (around October 8th -- I'm not sure what pods they are on). FWIW, here's the place where the page times-out while trying to post the data:
Using stream = web.GetRequestStream()
stream.Write(postdatabytes, 0, postdatabytes.Length)
stream.Close()
End Using
I am passing the siteID and FormName, so I'm perplexed as to why this suddenly stopped working.
Any clues?

Have now tried the sim in a C6-01 and there were no problems al at all with data connection. So now I'm guessing that there's a problem with the APN for this sim in the Lumia. Unfortunately the Network Setup app runs ok but is not fixing the problem.
If I reset the phone to clear the APNs, should I reset it with the sim in or out?
Also, on the subject of resetting, my problem seems to be the same as the one detailed here:
/t5/Nokia-with-Windows-Phone/APN-configuration-problem-Lumia-800/m-p/1232545/highlight/true#M1713
...but in their case resetting did not fix the problem.
Please please, anybody know what's going on here and now to fix it? Surely sombody from Nokia must understand what is going on?
Thanks,
Matt

Livecycle designer has stopped working... acrobat cannot start adobe livecycle designer - on a fresh install of acrobat 8

As soon as i try to create a form from pdf, livecycle crashes...
I've tried reinstalling, repairing, everything under the sun, the application just crashes when I open it.
Tried deleting user/roaming/acrobat/designer, doesn't help...
using Acrobat Pro 8
help please? after a few hrs on chat with a tech, adobe refuses to support a product we purchased!

I wrote too soon.
So the form seems to be done and functional. I just had to click cancel before going to Livecycle. Then I save it and work on it in Acrobat. I don't know why Livecycle isn't installed correctly, or honestly, what Livecycle does that Acrobat doesn't.
Anyway, problem resolved.

Oracle forms designer has encountered a problem

When try to connect to the DB opening a forms or building a new form Forms crash with the message.
It happens after I upgraded the DB to 9.2.0.5. The DB is in Linux RH 3.0 ES
TIA

Do you have a Forms version number for us? If it ios an older Forms release, did you check the certification matrix in case that patches are required?
Frank

I get 'SAP BEx web Application designer has stopped workin' when click WAD

Hi,
When I click on WAD(Web Application Designer option from Business Explorer menu),
I get "SAP BEx web Application designer has stopped working".
I am running VISTA.
Any hints on how to deal with this problem?
Thanks

Hi,
I uninstalled and installed again the GUI and Bex Explorer
I installed again SetUpAll.exe and selected:
--SAP GUI for Windows 7.10 (Compilations3)
--BW 3.50 Add-On for SAP GUI 7.10
--Business Explorer
On completion, I had two options for WAD:
--Web Application Designer (SAP BW 3.x)
--Web Application Designer
When I point my mouse on "Web Application Designer " for selection, there is a message that
"Business Explorer Web Application Designer - Can only be used in SAP NetWeaver 7.1"
and when I go ahead to click on it, I get the error message I reported in my initial post
If I select Web Application Designer (SAP BW 3.x), it takes me in alright but the view is a bit different, in that in the New template of the Web Application, on the right pane, I do not see the icon for DataProvider which used to be there when I used to work in "Web Application Designer" instead of "Web Application Designer (SAP BW 3.x)"
Any hints?
Thanks

Oracle forms 6i designer has stopeed working when opening canvas?

forms 6i
Hi to all,
i have facing one problem when opening form canvas.i get the error message like this "oracle forms 6i designer has stopeed working".
any one help please
Regards,
Stevie

Hi
no os no db version not enough information ..!
Pls try to send adequate information Pls& look at the following thread this might help
connecting form 6i to oracle database 10G express edition
Amatu Allah

Internet Explorer has stopped working for IE8&9 in win7 for Oracle apps

Dear All,
While opening forms in windows 7 proffessional we are getting the below error ..
Internet Explorer has stopped working
after click the online solution getting the below
Internet Explorer has closed this webpage to help protect your computer for IE8 and IE 9
and it was working with Win XP and IE7...
my Oracle application verion is 11.5.10.2
forms developer version is 6.0.8.25
i have checked the IE8 is certified with 11i for win7..
Oracle Jinitiator version 1.3.1.21
and i have tried with firefox also but it was not opening and it was stoppped at the second window i think we need install extension but enable Java for this not useful.
i have tried with so many solution via google but resolved it....
if any one give me solution for this and also tell me how to open forms in firefox for oracle 11i
Thanks in Advance.....

Hi,
i tried upgraded the JRE but not solved.
the problem is INTERNET EXPLORER has stopped working while opening forms
and view problem details shows like below..
Problem signature:
Problem Event Name:     BEX
Application Name:     iexplore.exe
Application Version:     9.0.8112.16457
Application Timestamp:     50a2f9e3
Fault Module Name:     jvm.dll
Fault Module Version:     0.0.0.0
Fault Module Timestamp:     451ba4ef
Exception Offset:     000bc430
Exception Code:     c0000005
Exception Data:     00000008
OS Version:     6.1.7601.2.1.0.256.48
Locale ID:     1033
Additional Information 1:     f021
Additional Information 2:     f021b4c9b91f8291caac8e31885832ca
Additional Information 3:     4050
Additional Information 4:     4050b4b420130162e60322654968da93
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
I think it was problem with IE settings or if IE8 and IE9 in win7 not supported for 11.5.10.2..
is it correct if not pls correct me?..
please help us..
Thanks in advance...

My distributed form has stopped working after Acrobat did an update the form no longer appears in my tracker.

I had a form that auto collected data through Adobe but it has stopped working after my Acrobat X Pro did an update.
The form no longer appears in the tracker. How can this be fixed? I am using Windows 7.
It would appear that since Adobe are going to be closing the Workspace area in January 2015 that when
Acrobat did an update the ability to connect to files in the Workspace has been removed.
Is there any way to reconnect the file back to the Tracker?
Has anyone else had the same problem?
Adobe don't seem interested in helping as this question has been posted for three days and yet no response.

First and foremost thing you can do it is that reset your Firefox and after that change it to safe mode.This may be happening due to venerable links getting downloaded.
enjoy free web..... :)
regards,
Gautam sharma.

Adobe Acrobat 9.0 has stopped working (after Start Form Wizard)

Downloaded Trial for Adobe Acrobat 9.0
Tried reinstalling
Latest windows 7 patches
Adobe Acrobat 9.0 has stopped working
(after Start Form Wizard)
Windows can check online for a solution to the problem
details"
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    Acrobat.exe
Application Version:    9.0.0.332
Application Timestamp:    4850eb76
Fault Module Name:    MakeAccessible.api
Fault Module Version:    9.0.0.332
Fault Module Timestamp:    4850e54e
Exception Code:    c0000005
Exception Offset:    000e1059
OS Version:    6.1.7600.2.0.0.256.1
Locale ID:    1033
Additional Information 1:    0a9e
Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
Additional Information 3:    0a9e
Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
===============================
===============================
SYSTEM INFORMATION
=========================
System Parameters
Available Physical Memory: 1429660 KB
Available Virtual Memory: 1912212 KB
BIOS Version: DELL   - 42302e31
Default Browser: C:\Program Files\Internet Explorer\iexplore.exe
    Version: 8.00.7600.16385 (win7_rtm.090713-1255)
    Creation Date: 2009/07/13
    Creation Time: 4:43:32 PM
Default Mail: Microsoft Office Outlook
    mapi32.dll
    Version: 1.0.2536.0 (win7_rtm.090713-1255)
Graphics Card: Intel(R) G33/G31 Express Chipset Family
    Version: 8.14.10.1930
    Check: Not Supported
Installed Acrobat: C:\Program Files\Adobe\Acrobat 9.0\Acrobat\Acrobat.exe
    Version: 9.0.0.2008061200
    Creation Date: 2008/06/12
    Creation Time: 2:25:18 AM
Installed Acrobat: C:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.exe
    Version: 9.3.2.163
    Creation Date: 2010/04/03
    Creation Time: 10:57:52 PM
Locale: English (United States)
Monitor:
    Name: Intel(R) G33/G31 Express Chipset Family
    Resolution: 1024 x 768 x 75
    Bits per pixel: 32
OS Manufacturer: Microsoft Corporation
OS Name: Microsoft Windows Vista
OS Version: 6.1.7600
Page File Space: 4194303 KB
Processor: x86 Family 6 Model 23 Stepping 7 GenuineIntel ~2493 Mhz
System Name: DELLINSPIRON
Temporary Directory: C:\Users\alan\AppData\Local\Temp\
Time Zone: Pacific Standard Time
Total Physical Memory: 2097151 KB
Total Virtual Memory: 2097024 KB
User Name: alan
Windows Directory: C:\Windows
Installed Plugins
=================
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\Annots.api
    Version: 9.0.0.2008061200
    Creation Date: 2008/06/12
    Creation Time: 1:59:50 AM
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\EScript.api
    Version: 9.0.0.2008061200
    Creation Date: 2008/06/12
    Creation Time: 2:05:18 AM
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\PPKLite.api
    Version: 9.0.0.0
    Creation Date: 2008/06/12
    Creation Time: 2:08:24 AM
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\SendMail.api
    Version: 9.0.0.2008061200
    Creation Date: 2008/06/12
    Creation Time: 2:17:10 AM
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\Updater.api
    Version: 9.0.0.2008061200
    Creation Date: 2008/06/12
    Creation Time: 2:00:30 AM

To go along with Michael's suggestion, something like AA9.2 is needed for X64 systems I think. Also, be careful. Acrobat is not licensed for use on a server. Using it as a user is fine, but not as a server application. Read the license carefully.

Oracle BI Administration tool has stopped working

Just now finished the 11g installation.But im not able to open BI Administrator.Im getting this error.Please help.
"Oracle BI Administration tool has stopped working
A problem caused the program to stop working correctly.Please close the program"

I followed the below steps(taken from this forum) for installing OBIEE11g 64 bit version in a 64 bit machine.Installation completed successfully.But not able to open BI Administration tool.Any suggestions???
There is not a particular 64bit installation. I think it works like this: if you are using a 64bit JDK the apps server is also running 64 bit.
You can find the generic jar here: http://www.oracle.com/technetwork/middleware/ias/downloads/wls-main-097127.html and take the generic one (http://download.oracle.com/otn/nt/middleware/11g/wls1033_generic.jar)
You install this by a command like this (you have to look up the documentation): java -XXm.... .... wls1033_generic.jar
Then a installer pops up.
So these were my steps:
- installed RCU
- installed 64 bits JDK (jdk-6u21-windows-x64.exe)
- installed Weblogic (wls1033_generic.jar)
- installed OBI as "software only"
- configured OBIi (config.bat you can find in <obi11g home>\Oracle_BI1\bin)
All together it does not take much longer then the 32bit install. Only some extra steps to do.
---------------------------------------------------------------------------------------------------------------------------------------------------------------

Oracle forms designer has stopped working

Similar Messages

Maybe you are looking for