Oracle forms display bright white flash when transitioning between forms.

We recently migrated an application from Oracle Application Server to WebLogic and we are noticing that in the WebLogic environment while transitioning between forms there is a quick bright white flash that has caused several complaints. We are not sure if this is related to a performance issue which may be preventing the form from painting quick enough or if there is a configuration problem somewhere. Has anyone else seen this behavior?
We are running WebLogic Server Version 10.3, Fusion Middleware 11gR1, and Oracle DB 11.2

Unfortunately we don't have any errors to work off of. The application works fine, it's just that their is a very short delay when transitioning from one form to another and during that transition the whole form turns bright white which has caused users to complain that it could cause an epileptic seizure. I assumed maybe there was some performance tuning/caching that could be done to make it so it loaded quicker. Our DBA team recieved a response from Oracle support stating that although the forms themselves are relatively unchanged, due to the underlying software changes in 11g we are to expect some differences compared to previous versions. We have since set background in formsweb.cfg to use a light grey image which seems to be more acceptable for our users.
Edited by: user4597705 on Oct 12, 2012 1:18 PM

Similar Messages

Monitor displaying bright white message when it is about to enter power saving.

Is there a way to disable the bright white "monitor is about to sleep" on the Paviliion 23x1?
It's blinding at night. If there's no way to do this the screen is going to be given away or put in the bin given that it was only £100 or so. The iritation is far not worth it.
If there isn't a way then all I can say is it is designed by idiots.

Hi Almach89,
Welcome to Nokia discussions board!
We are sorry for the inconvenience. I advise yout to try and back up your data with Nokia Suite. If you do not have it installed on your PC yet, you may do so with this link.
Then connect your device to it and go to Tools > Back up. Also go to Synchronise > Synchronise now > All. Once the sync is completed, check the different tabs to see if the data has been correctly synced. If this is successful, your data will now be safe (please use your own judgement).
You may update your device from the updates tab to see if that fixes the screen issue.
Alternatively, please take your device to your nearest Nokia Care Point or call your Local Careline, please find the details via this link.
Feel free to post any other questions you may have.
Regards,
astra2025
Press the 'Accept Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

I have a bright white screen when turning on my ipod nano 7th gen. Have tried resetting etc etc. Any further ideas?

I have a bright white screen when turning on my nano 7th gen. Have tried resetting and restoring settings - no change. Any ideas please?

Hello pipworms,
I would be concerned too if my iPod nano's was just showing a white screen. I recommend following the steps below:
Display shows a white screen
Try putting the iPod into disk mode:
Reset the device (Reset the device by pressing the Sleep and Home buttons simultaneously until the display shows the Apple logo. This should take about eight seconds).
When the Apple logo appears, press and hold the Volume Down and Volume Up buttons simultaneously until the device enters Disk Mode.
While the device is in disk mode, sync it to iTunes and try to restore.
I got this information from the following article for the 6th generation iPod nano. The steps are the same, except I updated the reset steps with the reset for the 7th generation iPod nano:
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/ts3474
How to reset iPod
http://support.apple.com/kb/ht1320
Putting iPod into Disk Mode
http://support.apple.com/kb/HT1363
Thank you for using Apple Support Communities.
Best,
Sheila M.

White flashes in transitions

Just upgraded to iMovie 6.0.3, and now I'm getting a visual "flash" during transitions between stills. Seems to happen no matter what the length or style of the transition or clips. Seems to happen at the end of the transition.
Power PC G5 Mac OS X (10.3.9)

does it also happen when you use the Ken burns effect?
Would that be the same as "flickering"?.... or maybe choppy looking
I do get quite a bit of that on my intel/IMovie 6, but not on my G-5 Power, using the same software.
I thought it might be just the intel. I mean heck, I just updated to the latest.

Form Builder (Forms 6i) exit without message when compiling a form module

Hi all,
i can't resolve problem with Form Builder since 2 weeks.
i have Forms 6i which always exit when i compile form module connecting
to a remote database (oracle 817). There is 2 remote database server 817 in our LAN.
However this happen only for one remote server, while the same form module connecting to another remote database (oracle 817) is well compile and work fine.
I configure a service name with Net8 Easy Config locate on <Oracle for Windows 95>, but the problem is the same. Can anyone suggest, what could be the reason for the problem.
Best regards.

Hi Experts,
We are getting the same issue. Our form builder crashes once we open our custom form
in form builder.
Server shows:-
Forms 6.0 (Forms Runtime) Version 6.0.8.28.0 (Production)
Form Builder shows:-
Forms [32 Bit] Version 6.0.8.11.3 (Production)
How to upgrade the form builder version?

Slide transition between forms?

Hi,
How can I make a transition between forms so that it appears the second form slides in from the right?
I know its possible to make a slide effect with a timer, but how do I do it to move a form?
Thanks!

To make it slide in from the left, change the starting point and the direction of movement.
Public Class Form2
    Private Sub Form2_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
        Me.Top = Form1.Top
        Me.Left = Form1.Left
        timer1.enabled = True
    End Sub
    Private Sub Timer1_Tick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Timer1.Tick
        If Me.Width < Form1.Width - 5 Then
            Me.Width += 5
        Else
            Me.Width = Form1.Width
            Timer1.Enabled = False
        End If
        Me.Focus()
    End Sub
End Class

White flash when previewing movies on full screen

Sometimes, when previewing my current editable movie project on the full screen I see a brief white flash at the end. Any idea why this is, please, and can it be avoided? No problem, I guess, if it does not appear in the final iDVD version or on the burnt DVDs. Thanks, Keith.

Hello, Keith,
Welcome to the discussions.
Some users reported a brief white flash in association with a transition. Is yours related to a transition? The 'cure' was to move the playhead frame by frame until you see the white flash, then 'split video at playhead' to isolate the flash. Usually it is only a frame or two in duration, and you can delete it.
If it is with a transition, you will have to delete the transition, find the white flash frame, delete it and redo the transition.
Post back if this is not helpful.

IPhone 5 white flashing when on camera in the dark?

iPhone 5 when I go on camera in the dark I notice a white flashing dot above the option button. When I slide it on to video or face time camera it goes? Help!!!

The flash on a smartphone camera is tiny. It only lights up a very small area right in front of the camera. It won't light up the whole scene.
Have you seen the size of the flash on a professional camera? Even they can't light a whole scene in the dark.
Fact is, a smartphone camera is not capable of taking good photos in the dark, even with the flash.
You'll need to buy and learn how to use a professional, dedicated SLR camera to be able to take good photos in the dark. It is not easy.

White Flash on transition

I have made several movie's with still photos put music. I have 1 movie that has just started getting white flashes at the end of some of the transition. I used cross dissolve transition with all movies and only one is doing this. It also only happens with a few of the pictures/transitions.
PowerMac G5 2.3 Mac OS X (10.4.5)

We've had other people asking a similar question,
If dip to color dissolve is not what you arte after
I can only suggest something that despite not being a flash could
represent an alternative effect. Not sure what exactly you have in mind!
Take a look at [this|http://www.fxscript.org/demos/glow.html]
gig

Bright white screen when video is paused.

Hello All,
I've looked everywhere for a solution to this problem and there has been no previous discussion. Basically, whenever the Video is paused, instead of the paused frame being shown, there is a bright white screen. It is worth nothing that this issue happens when I use the Darwin Streaming server. If I serve the video using IIS, the issue is not present.
This issue using the Quicktime plugin is present in Chrome, Firefox, Safari, and IE.
If someone could push me in the right direction, it would be greatly appreciated.
Thanks.

Hi Brendon,
What has she done to set up AIM on her end ?
Has she enabled it though her XP firewall ?
Has she enable the ports AIM needs in her modem ?
8:38 PM Tuesday; December 19, 2006

White flash when wake from sleep

Just upgraded my 2007 iMac to ML. Notice that when I wake from sleep there's a white flash, or perhaps a bit longer, on screen before the desktop appears. It's similar to the white screen when booting, just before the worm gear appears.
Anyone else notice it? Normal behavior?

Yes, on a mid-2011 MacBook Air. Tried resetting SMC, no luck. I've installed all the prior firmware updates. It only happens when running on battery power. I'm going to experiment with disabling Power Nap when running on battery to see if that makes a difference.

Using embedded SWF, get a white flash when its to play

Hi,
We develop e-Learning content using swf files embedded in
DCRs. We have started noticing a problem with the new Shockwave
player 10.1+ in that there is a noticable flicker or white flash
before the swf plays or is told to move on.
Has anyone had a similar problem? Does anyone know a
solution?
We are using Director 8.5 and Flash 8.0. files published for
Flash Player 5.0.
Simon

Well dont all fall over each other trying to post a possible
solution ;-).
Seems that we found the problem. We use shared script
libraries (cst & cct). It appears that there is a line in our
lingo code that sets the flash sprite cast member automatically
direct to stage. Shockwave player 10.1 + does not seem to like this
on standard speed machines and causes a flickering border around
the flash animations, which is really noticable. The line of code
reads as so:
sprite(channelNo).directToStage = true
We simply commented this out and the page functions fine.
Incedently, if I manually set the flash cast member as direct to
stage, we get the same issue, only more exagerated. This must be a
bug in the 10.1+ player as we don't get the issue at all on
machines running the 8.5 player.
Simon

My iPhone 4s turns off after battery gets below 40% and sometimes when I take a photo,it shows the photo in the photo album but will display a white screen when i tap on the photo. Please help thank you :)

My Iphone 4s is 2 years and 3 months old. the battery drains very quickly, sometimes turning off once it reaches 40% if I open an app or say the camera.
I charge it more than twice a day now as the battery life is so poor.
Also, when I take a photo, the phot sometimes shows in the album, but if I click on it, it shows up as a white screen and I cannot send the photo either as the recipient gets a blank screen.
I am not super flash with technology, so please be nice!
Thank you

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the issue persists, take the device to Apple for evaluation and possible replacement.

I get one bright white flash in iDVD

After I import a Quicktime movie into iDVD and then play it, I get one very short white bright flash in the beginning of the movie.
How do I get rid of this flash?

You might try removing the first frame or two from the beginning of the QT movie and add it again to the iDVD project. Be sure to remove the movie from the project before editing it.
OT

White flash when looping swf

Hi,
I have done a simple banner for a website in Flash which I would like to loop seamlessly but I'm getting a flash of white every time the movie replays!!
It works fine when I play it in Flash but won't work when exported. I've tried looking through all the publish settings but can't seem to find where I'm going wrong.
There are definitely no blank frames at the end of the movie.
Any help?

The wmode property is in the html page code. By default it is either set to opaque or not specified at all. You need to be sure that the wmode parameter is both specified in the html code and that it is set to be transparent.
I can't guarantee this will solve it, but it did for someone else the other day. It could also be a bowser shortcoming.

Oracle forms display bright white flash when transitioning between forms.

Similar Messages

Maybe you are looking for