Oracle Forms IDS on a windows 7 OS

We have had problems with forms since we moved to Vista and have just lived with the crashing as we understood it wasnt certified.
I have recently read some posts where people have fixed this constant crashing in Vista with a patch 7047034 but this says it should be installed on a 10123 IDS.
We have IDS but when i do about it is 101202. Is there a patch to get this up to 10123 as i can not find it?
Also the patch above is for the 10g db which i assume is the infrastructure installed when you install dev suite (which we dont use) but in our case is 904 i think?
Any help much appreciated

First, understand that Win7 is not a supported platform to be used with Forms/Reports 10.1.2.x. So whatever you decide to do, it will be at your own risk.
You can get from 10.1.2.0.2 to 10.1.2.3 by installing patch 5983622. This patch is available in MyOracleSupport (http://support.oracle.com). Information about getting this to work on Vista will be the same for Win7, but again this will not at all be supported by Oracle Support. More info is available in MyOracleSupport note 559067.1

Similar Messages

Problem installing Oracle forms and report in windows 7

I have a problem while installing Oracle forms and reports in windows 7 64 bit
The error is : [as] [ERROR] [] [oracle.as.provisioning] [tid: 20] [ecid: 0000IY5_e_EApIRMyYAhMG1BuDGr00000B,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:688)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
So I Google for it and found that this is version mismatch (May be I am wrong) and it tells that I have to install WLS - 10.3.2 with ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
But I am unable to get wls version 10.3.2.
For better understanding I am listing my installers :
(I) Windows 7 Ultimate 64 Bit
(II) (Oracle 11g) win64_11gR2_database (1 & 2)
(III) ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
(IV)wls1033_generic.jar , wls1033p_generic.jar , wls1035_generic.jar
(V)accessbridge-2_0_2-fcs-bin-b06
(VI)ofm_rcu_win32_11.1.1.2.1_disk1_1of1,ofm_rcu_win_11.1.1.3.1_disk1_1of1
(VII) ofm_wc_generic_11.1.1.5.0_disk1_1of1
(VIII)jdk-6u38-nb-7_2_1-windows-i586-ml , jdk-6u38-windows-x64
(IX) oepe-wls-indigo-installer-11.1.1.8.0.201110211138-10.3.6-win32
(X)wls1033_oepe111150_win32.exe
(XI)wls1035_win32.exe
(XII)wls1035_oepe111172_win64
(XIII)oepe-indigo-installer-12.1.1.0.1.201203120349-12.1.1-win64
After the installation while configure the forms reports, I am stuck while creating domain.
steps I follow is :
(i) Install Windows 7 Ultimate 64 Bit
(ii) (Oracle 11g) win64_11gR2_database (1 & 2)
(iii) wls1033_generic.jar
(iv) accessbridge-2_0_2-fcs-bin-b06
(v)ofm_rcu_win32_11.1.1.2.1_disk1_1of1
(vi) ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
Please any body help, for the installation of oracle forms and reports.
I have a formatted Windows 7 Ultimate
Where I have installed Adobe Acrobat Reader
IIS server from windows installer
Now I want to know the exact procedure so that i can run the forms and report in my machine.
This is my first installation of Oracle forms & Reports, so please do not pre assume about my understanding (Like "to install this he surely did this environment settings" )
Please specify all the steps
Furthermore if Another software I have to download then please tell me.
And I will be grateful if you specify the mistakes in my side.
Looking forward with anticipation.

Solved, Thank you

Install Oracle Forms 10g R2 in Windows 7

Hi,
does anyone has ever succeeded to install Oracle Form 10g R2 in Windows 7 Home Premium?
How to overcome the Jinit issue in there? Friend of mine suggested we can download the Jinit for Vista version and replace the current Jinit with it.
Do I need to change anything too in Formsweb.cfg? Windows 7 works with IE 8.
Is the Forms can work with Oracle 11g R1 client 64 bit for Windows?
thanks in advance.

Why bother with JInit? It's long desupported. Just replace it with the latest Java Plugin, and you'll be fine.

Running oracle form builder 10g in windows 7 64 bit

i am working in windows 7 64 bit
oracle db 11g enterprise edition 11.2.0.10 64 bit
form builder 10.12.0.2 32 bit
my default browser is Google Chrome
i have java 6 standard edition 1.6.0_34
when i am trying to run any form this message appear " java (TM) is required to display some elements in this page"
what can i do to run those forms?

You can also refer to this OTN reference:
Oracle Application Server 10g (10.1.2) Certification Matrix
Other comments:
1. I would not recommend using Forms 10.1.2.0 with Oracle DB 11.2.x. Patching Oracle Forms to 10.1.2.3 would be recommended. Using version Forms 11 would be better.
2. Attempting to use the Developer Tools on Windows 7 is not a great idea although it can be made to work. Developer Suite 10 is no longer supported and was never really intended for use on Win7. Again, patching to 10.1.2.3 is recommended and required if you plan to follow the Oracle instructions and certifications.
3. Installing the Forms Builder (Developer Suite) on Win7-64bit is not at all certified and was never supported.
4. Using Java 7 was not certified and therefore not supported for use with Forms 10.x
In general, Forms 10.1.2.x has been desupported. Customer using this version or older should be working on a migration plan for getting to the latest supported version which is 11.1.2.1.

How to connect Oracle Form Builder - Oracle Developer Suite 10g - Windows 7

Hi brothers and sisters,
Hope all you are fine. I have installed Oracle Developer Suite 10g on Windows 7 successfully and it is working properly. But when I connect to Oracle Form Builder using Connect window asking:
a. User Name
b. Password
c. Database
a message box appear: 'ORA-12154: TNS:could not resolve the connect identifier specified'
I verify my Connect String with: 'SELECT * FROM v$database', but the problem remain the same.
Please help me how can I connect to Oracle Form Builder.
Noor

hi
plz use Net Configuration Assistant or set tnsnames.ora with connect string and computer name.
Net Configuration Assistant.
when its opened then go to .
*Local Net Service Name Configuration.
*Click Next.
*Add.
*Click Next.
* Service Name--Type here connect String which is XE or any Connect String.
*TCP.
*Click Next.
*Host Name--Enter here Computer name or Ip address.
*Yes,Perform a test.
you can enter correct password and username here.
Note:- your Database should be Up if its not Up it will through the same error so plz startup your database first.
sarah

Bug in Oracle Forms Builder 6i?

When converting from binary to text in Oracle Forms Builder, the conversion is inexplicably dropping a WHEN-VALIDATE-RECORD trigger for one of my data blocks.
I am running Oracle Forms Builder 6i on Windows XP with the latest patches. I couldn't find anything in the bug search that resembled this problem. Is this a known issue? Is there a workaround?
Any help would be appreciated. Thanks!

I just tested this in 10.1.2.2 on XP and could not reproduce the problem. It is unlikely that this is a bug and if it was, it is very likely that it was already corrected.
Ensure that you are using 6.0.8.26. If you are using Oracle Applications you should be using 6.0.8.27.
Also, Error Correction Support for stand-alone Forms 6.0.x users ended long ago, which means that a patch cannot be provided for version 6.x.

How to use Java Beans in Oracle Forms 11g at 64 bit windows7

Hello Experts,
I am using Oracle forms 11.1.2.2.0 with weblogic 10.3.6 generic at windows 7 64 bit.
My java version is jdk1.7.0_51.
Now I have a htmlbutton.jar (which is for bean item in oracle form and this jar file works well for oracle forms 11g 32 bit windows 7 environment).
I have takken steps:
1:-Put jar file in home\java folder.
2:-add this jar file into archive in formsweb.cfg.
3:-Add this this jar file(which is in my home- java folder) in form_class path in registry.
Now when I try to locate this jar file in my oracle form.There is no such jar file.what are the steps to use this jar file in oracle forms bean item.
Please told me what is wrong here.
thank you
regards
aaditya.

It is unclear where you are having a problem. Is your issue at runtime (when the form runs in the browser) or when working in the Builder on the form?
Also be aware that you will need to sign your jar and include some new manifest entries. Refer to the Java 7u51 documentation and blogs that discuss the changes.
https://blogs.oracle.com/java-platform-group/entry/new_security_requirements_for_rias
http://docs.oracle.com/javase/7/docs/technotes/guides/jweb/manifest.html

Forms in a seperate Window / Frame (Tip / Solution)

Hello all,
I think I have a nice solution for the problem to start Oracle Forms in a separate window without an additional Iexplorer Window (not working for Firefox ,
Webstart is not possible because you don't get the env from default.env).
So I tell you that, I hope it helps :
What does the developer do.
He uses a javascript to open new window and copy the original webutiljpi.htm into this new window. Then he closes the main window and reload the new one.
That is all
webutiljp_wini.htm
<HTML>








































<HEAD><TITLE>Loader</TITLE>
<script language="javascript">
function create_html(){
var quellcode = ' @br@ \
<HTML>@br@ \
<HEAD><TITLE>%pageTitle% - WebUtil</TITLE>@br@ \
<BODY %HTMLbodyAttrs%>@br@ \
%HTMLbeforeForm%@br@ \
@br@ \
<OBJECT classid="%jpi_classid%"@br@ \
codebase="%jpi_codebase%"@br@ \
WIDTH="0"@br@ \
HEIGHT="0"@br@ \
HSPACE="0"@br@ \
VSPACE="0">@br@ \
<PARAM NAME="TYPE" VALUE="%jpi_mimetype%">@br@ \
<PARAM NAME="CODEBASE" VALUE="%codebase%">@br@ \
<PARAM NAME="CODE" VALUE="oracle.forms.webutil.common.RegisterWebUtil" >@br@ \
<PARAM NAME="ARCHIVE" VALUE="%webUtilArchive%" >@br@ \
<COMMENT>@br@ \
@br@ \
<EMBED SRC="" PLUGINSPAGE="%jpi_download_page%"@br@ \
TYPE="%jpi_mimetype%"@br@ \
java_codebase="%codebase%"@br@ \
java_code="oracle.forms.webutil.common.RegisterWebUtil"@br@ \
java_archive="%webUtilArchive%"@br@ \
WIDTH="1"@br@ \
HEIGHT="1"@br@ \
HSPACE="0"@br@ \
VSPACE="0"@br@ >@br@ \
<NOEMBED>@br@ \
</COMMENT>@br@ \
</NOEMBED></EMBED>@br@ \
</OBJECT>@br@ \
@br@ \
@br@ \
<COMMENT id="forms_plugin_info" @br@ \
plug_ver="%jpi_classid%" @br@ \
appheight="%Height%"@br@ \
appwidth="%Width%"@br@ \
appcodebase="%jpi_codebase%">@br@ \
</COMMENT>\
@br@ \
@br@ \
<NOSCRIPT>@br@ \
<OBJECT classid="%jpi_classid%"@br@ \
codebase="%jpi_codebase%"@br@ \
WIDTH="%Width%"@br@ \
HEIGHT="%Height%"@br@ \
HSPACE="0"@br@ \
VSPACE="0">@br@ \
</NOSCRIPT>@br@ \
 @br@ \
<PARAM NAME="TYPE" VALUE="%jpi_mimetype%">@br@ \
<PARAM NAME="CODEBASE" VALUE="%codebase%">@br@ \
<PARAM NAME="CODE" VALUE="oracle.forms.engine.Main" >@br@ \
<PARAM NAME="ARCHIVE" VALUE="%archive%,%webUtilArchive%" >@br@ \
@br@ \
<PARAM NAME="serverURL" VALUE="%serverURL%">@br@ \
<PARAM NAME="networkRetries" VALUE="%networkRetries%">@br@ \
<PARAM NAME="serverArgs"@br@ \
VALUE="%escapeParams% module=%form% userid=%userid% sso_userid=%sso_userid% sso_formsid=%sso_formsid% sso_subDN=%sso_subDN% sso_usrDN=%sso_usrDN% debug=%debug% host=%host% port=%port% fontsize=%fontsize% bold=%bold% statusbar=%statusbar% fg_color=%fg_color% %otherParams%">@br@ \
<PARAM NAME="separateFrame" VALUE="%separateFrame%">@br@ \
<PARAM NAME="splashScreen" VALUE="%splashScreen%">@br@ \
<PARAM NAME="background" VALUE="%background%">@br@ \
<PARAM NAME="lookAndFeel" VALUE="%lookAndFeel%">@br@ \
<PARAM NAME="colorScheme" VALUE="%colorScheme%">@br@ \
<PARAM NAME="serverApp" VALUE="%serverApp%">@br@ \
<PARAM NAME="logo" VALUE="%logo%">@br@ \
<PARAM NAME="imageBase" VALUE="%imageBase%">@br@ \
<PARAM NAME="formsMessageListener" VALUE="%formsMessageListener%">@br@ \
<PARAM NAME="recordFileName" VALUE="%recordFileName%">@br@ \
<PARAM NAME="EndUserMonitoringEnabled" VALUE="%EndUserMonitoringEnabled%">@br@ \
<PARAM NAME="EndUserMonitoringURL" VALUE="%EndUserMonitoringURL%">@br@ \
<PARAM NAME="heartBeat" VALUE="%heartBeat%">@br@ \
<PARAM NAME="WebUtilLogging" VALUE="%WebUtilLogging%">@br@ \
<PARAM NAME="WebUtilLoggingDetail" VALUE="%WebUtilLoggingDetail%">@br@ \
<PARAM NAME="WebUtilErrorMode" VALUE="%WebUtilErrorMode%">@br@ \
<PARAM NAME="WebUtilDispatchMonitorInterval" VALUE="%WebUtilDispatchMonitorInterval%">@br@ \
<PARAM NAME="WebUtilTrustInternal" VALUE="%WebUtilTrustInternal%">@br@ \
<PARAM NAME="WebUtilMaxTransferSize" VALUE="%WebUtilMaxTransferSize%">@br@ \
<COMMENT> \
<EMBED SRC="" PLUGINSPAGE="%jpi_download_page%"@br@ \
TYPE="%jpi_mimetype%"@br@ \
java_codebase="%codebase%"@br@ \
java_code="oracle.forms.engine.Main"@br@ \
java_archive="%archive%,%webUtilArchive%"@br@ \
WIDTH="%Width%"@br@ \
HEIGHT="%Height%"@br@ \
HSPACE="0"@br@ \
VSPACE="0"@br@ \
@br@ \
serverURL="%serverURL%"@br@ \
networkRetries="%networkRetries%"@br@ \
serverArgs="%escapeParams% module=%form% userid=%userid% sso_userid=%sso_userid% sso_formsid=%sso_formsid% sso_subDN=%sso_subDN% sso_usrDN=%sso_usrDN% debug=%debug% host=%host% port=%port% %otherparams%"@br@ \
separateFrame="%separateFrame%"@br@ \
splashScreen="%splashScreen%"@br@ \
background="%background%"@br@ \
lookAndFeel="%lookAndFeel%"@br@ \
colorScheme="%colorScheme%"@br@ \
serverApp="%serverApp%"@br@ \
logo="%logo%"@br@ \
imageBase="%imageBase%"@br@ \
recordFileName="%recordFileName%"@br@ \
EndUserMonitoringEnabled="%EndUserMonitoringEnabled%"@br@ \
EndUserMonitoringURL="%EndUserMonitoringURL%"@br@ \
heartBeat="%heartBeat%"@br@ \
WebUtilLogging="%WebUtilLogging%"@br@ \
WebUtilLoggingDetail="%WebUtilLoggingDetail%"@br@ \
WebUtilErrormode="%WebUtilErrorMode%"@br@ \
WebUtilDispatchMonitorInterval="%WebUtilDispatchMonitorInterval%"@br@ \
WebUtilTrustInternal="%WebUtilTrustInternal%"@br@ \
WebUtilMaxTransferSize="%WebUtilMaxTransferSize%"@br@>@br@ \
<NOEMBED>@br@ \
</COMMENT>@br@ \
</NOEMBED></EMBED>@br@ \
</OBJECT>@br@ \
@br@ \
@br@ \
%HTMLafterForm%@br@ \
@br@ \
</BODY>@br@ \
</HTML>@br@ \
window.name='opener';
nw=window.open('','_blank','locationbar=0,toolbar=0, resizable=1');
quellcode=quellcode.replace(//,"");
quellcode=quellcode.replace(/@br@/g,String.fromCharCode(13));
nw.document.write(quellcode);
main_window=window.open('blank:about','opener','');
main_window.opener=self;
main_window.close();
//nw.opener=self;
nw.document.location.reload();
</script>
</HEAD>
<BODY onLoad=create_html()>
</body>
</html>
Edited by: user4070147 on 30.10.2008 13:37
Edited by: Ralf Flatau on 30.10.2008 14:03

SITUATION:
Usually the forms applet can be started with either 'separateFrame=true' (which will result in an internetexplorer-window being opened, followed by a second window containg the applet) or with 'separateFrame=false' (which will result in the applet being displayed within the standard internetexplorer-window).
Disadvantages of the first method are:
- two tasks visible in windows taskbar, potentialle irritating for customers as the IE-window doesn't seem to be good for anything
- the applet will close/crash on the internetexplorer-window accidentally being closed or another URL being entered
Main disadvantage of the second method is that so far we have not been able to hide this window's locationbar, menubar etc.
SOLUTION:
Via JavaScript it is possible to open and close windows and under certain circumstances it is possible to do this without a popup asking for acknowledgement of the action being raised.
The JS-function works as follows:
1) assign the original html-code to a variable
2) assign a name (e.g. 'opener') to the current window
3) open a blank page in a new window. For this window we do not specify a name as this would prevent us from being able to open several applets in different windows (i.e. starting a second applet would cause the first applet's window to be used and thus the first applet to be closed).
4) next, we have to replace some substrings within our variable for parsing reasons
5) write the variable's content to the new window
6) open any page in the window named 'opener' (e.g. 'about:blank') and refer to this window's opener. These two steps enable us to close the window without a popup being displayed.
7) now there's only our applet window being displayed. For some yet unknown reason, the applet itself won't be executed without a reload-command.
Note: Working with IE7 (with multiple tabs), the '.close()'-operation will not close the IE-window but the current tab.
CHANGES (HTML):
Regarding the main changes, it's not really about the code of the standard HTML page but rather about displaying this page programmatically via javascript within a new window which therefore can be customized (menubar, locationbar, size, resizability etc.).
So what we're doing is mainly creating a wrapper for the original HTML page.
It might also be possible to have the standard HTML page's code in a separate file that is being loaded from within the script, but this would result in 2 files necessary (the wrapper script and the html page) and we haven't checked if the replacement of variables (%VARNAME%) that is done by forms will still work.

How I can use use_exit function in oracle forms

Hi,
I will appreacite if Somebody can help me , how I can configure the user_exit function for our Oracle Forms 10g development environment (Windows 32 ).
With regards
Satheesh Kumar

hi,
in order to find out the user exits for any tcode,
1. get the developement class of the tcode from SE93.
2. Now goto transaction SMOD and press F4,
3. give in the Deve class in the dev class and Press ENTER
this will show u the exits for any tcode.
or execute this report
http://www.erpgenie.com/sap/abap/code/abap26.htm
which gives the list of exits for a tcode
http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm
For information on Exits, check these links
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
Regards
Anver

Win XP + Oracle Forms/Reports 6i

Hello,
I am having issues with Oracle Forms/Reports 6i with Windows XP.
I have session issues as well as printing reports problems.
I have heard that Windows XP is not a certificed operating system with Oracle Forms/Reports 6i. Can anyone confirm this to me ?
Regards,
PT
PS: I heard that there is a Patch issued by Oracle (Patch 11 ???) that might resolve these kind or problems (???)

Paolo,
Patch 13 is the XP patch. However, if you install the most recent patch, then this includes patch 13.
Frank

Oracle Form for Blackberry

Hi guys,
Is there anyway I can run Oracle application on Blackberry Playbook?
Thank you

1010274 wrote:
I cannot load Oracle Form as my Desktop Window does. I think my Desktop needs kind of Java to run that application.so please explain why this problem or solution is appropriate for forum on Oracle DATABASE?
your problem is about client configuration & connectivity issue.

Oracld forms 6i Installation on Windows 7

Hello, I am installing Oracle forms 6i on a Windows 7 machine.
It errors out with the error :
netc80.ins(265): FILE_NOT_FOUND while copying TFTP.exenetc80
Kindly help.

You wanna see this ..
OUI cant determine the platform of this system

RE: Oracle Forms

Hi,all,
Is that possible to develop oracle forms or report for windows
but the Oracle running on Linux server? anybody has really done
that sort of work ?
Thanks in advance.
Jeff

You can develop Forms and Reports (client/server) on any
supported platform and run them on any other. You will need to
compile the source (.FMB/.RDF) files to executables (.FMX/.REP)
on the target environment.
It's not a perfect solution, though, as subtle differences in
the GUI environments mean that a fair bit of "tweaking" can be
required.
My advice? Use Web Forms!

Is Oracle Forms builder version 10.1.2.0.2 certified with Windows 7 ?

Hello
I need to change my old PC that is running 32 bit XP.
On this PC , I have installed Oracle Forms builder 10.1.2.0.2
I need to keep this version of forms as my customer is running the same version on linux.
I wish to upgrade my PC and install Windows7 (32 bit ) . Is Windows7 certified with Oracle Form builder 10.1.2.0.2?
Thanks
John Hall
Edited by: user2537956 on 20-May-2010 02:14

Hello Sunny,
I just asked that same question in a service request a few days ago and got this answer from Oracle Support:
Question "Could you please also check if Forms/Reports Builder *10g* (10.1.2.3.0) are being certified for Windows 7 (32- and 64-bit)? As far as I know Forms/Reports Builder 10g are currently not certified for Win7 at all."
ODM Answer / Action Plan:
"According to product management and http://www.oracle.com/technology/products/forms/htdocs/10gR2/clientsod_forms10gR2.html , Windows 7 is certified as a client platform for 10.1.2.3, however production runtime deployments on Windows 7 is not supported for this version. You can build your Forms applications using Forms Builder on Windows 7 and test it, but when it is time to deploy it in a multi user environment, it needs to be deployed on a supported production deployment. So it should be ok to install iDS 10.1.2.3 on Windows 7 and develop your applications. The installation should be according to How to Install Developer Suite 10.1.2.3 on Windows Vista (Doc ID 559067.1). The note is for Vista, but the instructions apply for Windows 7 as well."
So I'd assume Windows 7 to be supported as well with Forms and Reports Builder 10.1.2.3.0.
Regards
Andreas

Error while installing oracle forms on windows 7

hello all,
i want to install oracle forms 10g on windows 7.
But during installation i am facing the following problem.
*"Install has encountered an error while attempting to verify your virtual settings.please verify that the sum of the initial sizes of the paging files is at least 256 mb"*
How can i avoid this?
Thanks
Kaushal

Read the following link and you will get Answer.
How to Install Oracle ON windows 7
If someone response is helpful or correct, please mark it accordingly.

Oracle Forms IDS on a windows 7 OS

Similar Messages

Maybe you are looking for