Oracle forms installation - some help need

I am trying to install Oracle forms - but get the follwing message:
Checking swap space: 576 MB available, 1535 MB required. Failed <<<<
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,at which time they will be rechecked.
Continue? (y/n) [n]
actually - I have no choice to choose y and try what's going on - so - is this means that I shoul add some 1.5 GB of RAM to my computer? (I have already 700MB, only 300 of them are used)? I am using WinXP, free HD is above 3.5 GB, 2.4GHz processor.
Can I try to find some workaround - e.g. simply try to copy jar's from 'stage' (direcotry in installation disk) in Oracle application server's lib directory (where it is in Oracle_Home directory?)?
Any experience with installing Oracle forms?
This was trying to run setup.exe, but when I am trying to run wsf.exe - I get:
SEVERE: Unable to locate the MDAC Update Status registry key value, probably because the installation was aborted.
MDAC possibly stands for Microsoft Data Access Components? If so - where is problem - I can run a lot of DB servers, including Oracle server itself normally?
BTW - is there any free service available for Oracle Forms skills development (e.g. as for Oracle SQL the Intel test drive is available?)
user454720

OK - now I increased the max limit of my page file and now I achieved this:
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.0, 5.1 or 5.2 . Actual 5.1
Passed
Checking monitor: must be configured to display at least 256 colors . Actual
4294967296 Passed
Checking swap space: must be greater than 1535 MB . Actual 1600MB Passed
Checking Temp space: must be greater than 150 MB . Actual 1942 MB Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from C:\DOCUME~1\ADMINI~1\LOCALS
~1\Temp\OraInstall2006-03-18_01-57-43PM. Please wait ...
however - after this I receive the standard messgae:
'setup.exe has encountered a problem and need to close. we are sorry for the inconvenience..... Please tell Microsoft about thsi problem'
actually - I have little ideas what to do further - maybe I should look for other Oracle Installer version? I am using:
Oracle Universal Installer version: 10.1.0.2.0
and I am trying to install
Oracle Deveoper Suite: 10.1.2.0.2 (so - a bit higher)
I can run OUI without any problems, my Default JRE is 1.5_1 - so - all seems to be OK?
Please - if any idea - help me :))
Thanks in advance!

Similar Messages

MORE DETAIL ABOUT MY problem (Configuration Steps for Oracle Forms installation)

OS:WINDOWS 2000 SERVER
DB:8I
FORMS:6I
I WANT TO TEST MY FROM TO RUN ON THE WEB ONLY TEST BY (RUN FROMS IN THE WEB)
BUT I CAN'T DO CONFIGRURATION STEPS (VIRTUAL PATH)
WHERE I CAN DO THIS CONFIGRATION
Configuration Steps for Oracle Forms installation of 06:05:38 2002/10/18
This file gives details of the configuration steps done for you by the installation process
(marked '[INFO]') and of any actions you need to do manually (marked '[ACTION]'). Please read
this file and perform the requested actions.
[ACTION] If you are installing in a new Oracle Home, please reboot the machine after the installation.
[ACTION] Please configure the following virtual path with your web listener: /dev60temp for
physical directory F:\devnt\tools\web60\temp.
[INFO] NT service Oracle Forms Server [Forms60Server] has been created and started for
the Forms Server.
[ACTION] Please configure the following virtual path with your web listener: /forms60java for
physical directory F:\devnt\FORMS60\java.
[ACTION] Please configure the following virtual path with your web listener: /dev60html for
physical directory F:\devnt\tools\web60\html.
[ACTION] Please configure the following virtual path with your web listener: /dev60cgi for
physical directory F:\devnt\tools\web60\cgi.
[INFO] An internet shortcut to run a standard test form, or any form of your choice, has been
created for you in the Oracle Forms program group.
[ACTION] Please configure the following virtual path with your web listener: /jinitiator for
physical directory F:\devnt\JINIT.

Hi Guys,
Any help on this request will be very helpful.
Thanks,
Ashok Kumar.G

Oracle Forms Installation Problem

I am trying to install Oracle Forms Server on my computer but when I get part way into the installation I get the error message that I must stop all Oracle Services and Applications using NET8 for the NET8 installation to be successful. All my Oracle are services are stopped and I am unable to complete the installation.
Can anyone help?

Hi!
The PC which I was trying to install already Windows XP and Oracle 9i got installed. Then I was trying to install Forms6i. First I clicked the Forms6i installer and then selected the required products(I was trying to install thru custom) and then clicked 'Install'. Thats all everything disappeared. I again tried the same procedure, but everytime after I select the products and click the 'Install' nothing I could see.
I found in some forums that for Windows XP, I need to patch Patch13 or above. But without installing Forms6i how I can patch the Patch13? I found one more solution from forums that I need to reinstal Oracle9i(Oracle9i has to be installed after installing of Forms6i,preferably in a separate drive than Forms6i). As my user has time restriction I can't do this.
I am not sure these two solution may really workout or not. So can anybody help me, what I should do now? How to install Forms6i without deinstalling Oracle9i.
Thanks in advance

PDF form field calculation help needed

I need to make some simple calculations on a pdf form and need some help.
I have a form field for number of guests.
A field for a set cost for various tickets (there are 3 levels of ticket prices) (I might not need this field).
A subtotal of the guests attending and ticket price.
A grand total of the subtotals.
I can't figure out how to either put in a fixed cost in a form field or input a calculation so that the number of tickets is muliplied by a fixed number and gives me a subtotal.
Thanks.

Ok. I finally got the calculations to work. But..... when I save and open in Reader, they don't work. Go back to Pro, they don't work there now either. They also don't show up under the Set Field Order Calculations. To reset them, i have to erase the calculations, save, redo the calculations. Preview the form and everything works — calculations happen and i get a total.
Adobe Reader usage rights are enabled.
Why is this so hard?
I found this thread http://forums.adobe.com/message/1152890#1152890 about it. Is this bug still going on since 2009?
Ok. Apparently you have to enable reader rights after the form is done. It seems to work now. What a pain.

Best Practices for BI, ADF and Oracle Forms installations on Weblogic

Hi, I'm researching options on upgrading to Oracle 11g Middleware. My company currently has Oracle Forms 10g running on Oracle Application Server.
We are interested in using Oracle Forms 11g, ADF and Jdeveloper, and Business Intelligence with Oracle's Weblogic 10.3.5.
Is there any whitepapers or documentation on best practices for installing alll of these components together?
For instance, can ADF ( with JSF 2.x ) be installed in the same domain as Oracle Forms 11g but use different managed servers?
Will Business Intelligence need to be in a seperate Oracle Home with it's own weblogic installation? I spend a lot of time trying to get the JSF upgraded to 2.x in the Business Intelligence installation and could not get it to work.
I know it's a pretty broad question but thank you for any direction on this.

Thanx for the reply! I read through the documents and they are very good at explaining how to install the different components individually. I still can't find much on installing them together. I hope it's not just going to be a trial and error thing.
So far I've installed done the following successfully:
Installed 10.3.5 weblogic
Forms and Reports 11g on top of 10.3.5
I've created an additional managed server for our ADF applications.
My next step is upgrading the JSF to 2.x. I would have to stage patches 12917525 and 12979653. I'm afraid it will break the forms and reports though. Any ideas?

Oracle Business Events related help needed

Hello All,
Good Morning , wanted some help regards Oracle Business events be used for sending notifications.
We are having a situation wherein we need to send notifications to the sales team whenever there are changes to the order line status..lets say the order line moves from Booked status to Awaiting Shipping status and further to Picked or Shipped status, we need to notify the sales team about this.
If we are going to use Business Events concept for this we wanted to check on the below points -
1.At the order line level what all seeded business events have been defined ( means if we could get the complete listing ) and whether any of these gets triggered when the order line status changes...we are on Oracle Release 12.0.6 version
2.Also is there a way to know what all parameters are being passed for a given seeded event, so that we know which parameters we could retrieve within the subscription using wf_event_t.getvalueforparameter function.
3.Regards setting up Subscriptions for this order line seeded business event : means we could see an option which says : "Send a Notification" when we are defining a Cstom Sbscription ( Now here it asks to give the Message Type ( This would be workflow item type where the message is defined in workflow ) and Message Name ) ..
Now if in this NOTIFICATION MESSAGE we need to show details like order number , sales rep , order line status etc ( then where do we set these details in the Event and also how do we pass these details from subscription so that it shows in the notification )
Means where do we setup and define values for the notification message attributes and how do we pass these values from event to the subscription and finally to the notification..How do we achieve this because some of the message attributes for the notification are Document Type while some are text/number types.. These would be required to show in the notif message...
4. Also once we send the notification lets say succesfully to person or a role using a subscription , how do we capture the response ...
Could someone please help us with this as we are stuck with this at the moment.
many thanks

Hi,
please reply the above questions.it would be a great help for me.
Thanks
Sap Guru

Oracle Forms Installation

Hi All,
I have a basic doubt regarding the installation of Oracle Forms & Reports. I already have an Oracle 10g database installed on my system, now in my trial for installing Oracle Forms and Reports, I am downloading the Oracle Developer suite 10g for Windows, I hope which contains both Oracle database, as well Forms & Reports. Does this mean I have to remove the existing Oracle database on my system, and then reinstall everything freshly, or can I go ahead with only installing Forms & Reports directly..
Please guide me.
Thanks!!

Hi All,
Thanks for your input. I successfully installed Oracle Developer Suite on my system. Here, I have one more question, I already have JDeveloper 10g executable on my system, and with this installation I have two JDeveloper components. I will anyway delete the first one, rather uninstalling it, as it is only a executable file.
My question is whether this JDeveloper along with Oracle Developer suite an executable file or an installation? coz, had it been only an executable file I can install JDeveloper 11g on my system and have both versions running. If this JDev 10g is an installation file, then how can i install JDeveloper 11g on my system? I mean, can I now install JDeveloper 11g separately?
Many Thanks!!

OracleAS 10g installation (please Help)

Hi All
i want a help in[b] OracleAS 10g installation
in the first step in it's installation . must install oracleAS infrastracture . in my way to install it many Errors & messages appears to me
this Errors & messages in 4 pictures to see it .. hope to find a solution for this
th pictures in this links
1- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5413
2- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5414
3- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5415
4- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5416
after pressing ignor in the forth screen many errors & messages appears to me

Oracle AS10g = 10.1.2.0.2 I presume...
However, my first questions is still valid "The questions is if you followed EVERY step outlined in the Application Server Installation Guide? If you did, then there should be no errors."
I have had similar issues when environment variables was still set during installations, ORACLE_HOME etc. You must unset those, as described in the Installation Guide, before starting an installations.
Please check these two Metalink Notes:
295446.1 "OracleCSService service may fail to start during the install of IAS 10.1.2 on Windows"
365046.1 "The Infrastructure DBCA Stops with Error "Failed to initialize OCR"
Regards,
Martin

Attn: Oracle Form programmers - pls. help

Can somebody pls. give me the syntax for writing Oracle Query Forms. I've done it before but forgotten the syntax.
The idea is to create a statement by APPENDING the search items in a program unit & substituting in the WHERE clause. This program unit will be called by a button.
This way, we don't have to write many IF statments.
For example, if user wants to query by NAME AND COUNTRY, then the statement >> Block:Name ||&|| Block:Country
Where clause: Block:Name ||&|| Block:Country
Thanks - Mave

1. that subject line of yours is just stupid. You're posting on an Oracle Forms Forum. Every single post on this forum is looking for help from Oracle Forms programmers.
Be specific.
2. I assume you're looking for something like
DECLARE
v_default_where VARCHAR2(32767);
v_btn NUMBER;
begin
IF :control.name is not null then
    v_default_where := v_default_where||' AND name LIKE :control.name';
END IF;
IF :control.empno is not null then
    v_default_where := v_default_where||' AND empno = :control.empno';
END IF;
IF v_default_where IS NULL THEN
    v_btn := show_alert('NO_CRITERIA');
ELSE
    v_default_where := SUBSTR(v_default_where,5); -- remove leading ' AND '
    set_block_property(data_block, ONETIME_WHERE, v_default_where);
    EXECUTE_QUERY;
END IF;
END;

Some help needed for guides.

Hi,
I need this script, or another, to place guides in "dead-centre" (50%/50%)horizontal and vertical!
Since I'm a nobody in Jsx I need some help, badly!! :)
For 2 day's I've seen nothing but "errors" :(
Can somebody help me, please?
Regards
Mahon
Code: start
// make guideline
function guideLine(position, type) {
// types: Vrtc & Hrzn
// =======================================================
var id296 = charIDToTypeID( "Mk " );
var desc50 = new ActionDescriptor();
var id297 = charIDToTypeID( "Nw " );
var desc51 = new ActionDescriptor();
var id298 = charIDToTypeID( "Pstn" );
var id299 = charIDToTypeID( "#Pxl" );
desc51.putUnitDouble( id298, id299, position );
var id300 = charIDToTypeID( "Ornt" );
var id301 = charIDToTypeID( "Ornt" );
var id302 = charIDToTypeID( type );
desc51.putEnumerated( id300, id301, id302 );
var id303 = charIDToTypeID( "Gd " );
desc50.putObject( id297, id303, desc51 );
executeAction( id296, desc50, DialogModes.NO );
Code: End

Please try this...
var strtRulerUnits = app.preferences.rulerUnits;
var strtTypeUnits = app.preferences.typeUnits;
app.preferences.rulerUnits = Units.PIXELS;
app.preferences.typeUnits = TypeUnits.PIXELS;
guideLine(app.activeDocument.width.value/2, 'Vrtc');
guideLine(app.activeDocument.height.value/2, 'Hrzn');
app.preferences.rulerUnits = strtRulerUnits;
app.preferences.typeUnits = strtTypeUnits;
function guideLine(position, type){
    var desc27 = new ActionDescriptor();
        var desc28 = new ActionDescriptor();
        desc28.putUnitDouble( app.charIDToTypeID('Pstn'), app.charIDToTypeID('#Pxl'), position );
        desc28.putEnumerated( app.charIDToTypeID('Ornt'), app.charIDToTypeID('Ornt'), app.charIDToTypeID(type) );
    desc27.putObject( app.charIDToTypeID('Nw '), app.charIDToTypeID('Gd '), desc28 );
    executeAction( app.charIDToTypeID('Mk '), desc27, DialogModes.NO );

Some help needed getting file path

I had some help earlier attaching a file to mail via a dialog. That worked great.
Now I am trying to get a particular file to attach.
The following works but if i try to dynamically define the path ie comment out line 1 and bring into the script lines 2 and 3 it only adds the folder (line one). Any ideas?
tell application "Finder" to set the_files to {alias "Alberti work:WSC projects:WSC Blue Haven 440b:Construction:Progress Certificates:440b_progress certificate_8.pdf"} --------------line 1
--set the_path to "Alberti work:WSC projects:WSC Blue Haven 440b:Construction:Progress Certificates:" as alias ---------line 2
--set attach_file to "440b_progress certificate_8.pdf" -------line 3
tell application "Finder" to set the_files to the_path & attach_file
tell application "Mail" to tell (make new outgoing message) to set visible to true
tell application "Mail"
tell front outgoing message
repeat with a_file in the_files
make new attachment with properties {file name:a_file} at after the last paragraph
end repeat
set visible to true
end tell
end tell

Your problem is in the line:
<pre class=command>tell application "Finder" to set the_files to the_path & attach_file</pre>
where the_path is an alias and attach_file is a string representing the file name.
When you use the concatenate operator ( & ) with two different object classes (in this case an alias and a string), you get a list as the result, so after this line runs the_files equates to a list containing two items:
<pre class=command>{alias "Alberti work:WSC projects:WSC Blue Haven 440b:Construction:Progress Certificates:", "440b_progress certificate_8.pdf"}</pre>
There's no way that Mail.app can translate that into something that can be attached to an email message.
Instead, what you want to do is NOT define the_path as an alias, leave it as a string. Now the above line would result in one long string of the form:
<pre class=command>"Alberti work:WSC projects:WSC Blue Haven 440b:Construction:Progress Certificates:440b_progress certificate_8.pdf"</pre>
which can easily be coerced to an alias suitable for Mail.app:
<pre class=command>set the_path to "Alberti work:WSC projects:WSC Blue Haven 440b:Construction:Progress Certificates:"
set attach_file to "440b_progress certificate_8.pdf"
tell application "Finder" to set the_files to alias (the_path & attach_file)</pre>

Driver Installation Error, help need

Hi all,
I just downloaded the newest drivers for my Soundblaster Audigy ZS 2, WinVista 32 bit.
When I try to install, everything goes fine till an error occured (see screen)
Screen: http://img5.imageshack.us/img5/660/errordj0.jpg
Something with the APOIM installer, any help would greatly be appreciated. I already searched the FAQ and known issues etc.
Thx in advance, xGj.

Hey I had that same error but?I resolved it.. First download winrar, www.rarlabs.com, second install it and then right click that exe for your driver and click on extract all to that specific folder, for vista the default is downloads, and then just extract and run the setup.exe in that folder and not from the program that you have downloaded from the creative driver website. Worked for me it should work for ya also, Good Luck...

Some help needed for installation of rich client component runtime demo

i have dwnld the demo and also read the Instructions
And while installing it asks jre/java path and my jdk is intalled in this path C:/Program Files/Java/jdk1.6.0_27/bin/
And i have typed the same path with java.exe at the last but it its says Insert a valid path.
How can i give the correct path.
And the another question is that, i have jDeveloper 11g 11.1.1.5.0 installed with Weblogic Server, does the installation package also contains WLS or only the war file?

Hi Shay,
the file i downloaded was over 900MB. So i want to know that it contained WLS also or the war file was so big as i have WLS installed. And the compressed archive had two folders named Disk 1 and Disk 2 and the Disk 1 had an exe file and when i run the file a command prompt like windows opens. At this point the path is asked.
So to directly download the war file i searched google and i got a link to this page
http://jdevadf.oracle.com/adf-richclient-demo/docs/release.html#Download
where these file were found
SHERMAN rcf-dvt-demo.war
SHERMAN adf-faces-demo.ear
But i couldn't download these files. or may be they were not available.
The 900MB file i downloaded is from this link:
http://www.oracle.com/technetwork/developer-tools/adf/documentation/adf-faces-rc-demo-083799.html
"Installing the ADF Faces Component Demo
Download the ADF Faces rich client component runtime demo web archive (WAR) file and store it on the local file system (e.g. c:\rcf-dvt-demo.war). Once Oracle WebLogic Server 10.3 is installed and started, open the WebLogic administration console in a browser window. To access the WLS console, type "http://localhost:7001/console" into the browser address field, assuming that Oracle WebLogic is installed on the local machine with the default port configured at 7001."
And it forwarded to this page:
http://www.oracle.com/technetwork/developer-tools/adf/downloads/index.html
As i had jDeveloper 11g 11.1.1.5.0, i downloaded the right version.
So can you provide the war/ear file directly?

Some help needed in creating trigger

Hi Everybody,
I was practicing trigger and I came across a question but i was not able to form a logic to create the trigger..
Here is the question
While modifying the EMP table, ensure that the salary is in the valid range as specified in the SALGRADE table (between lowest losal and highest hisal)
desc salgrade
Name                                      Null?    Type
GRADE                                              NUMBER
LOSAL                                              NUMBER
HISAL                                              NUMBER
desc emp
Name                                      Null?    Type
EMPNO                                     NOT NULL NUMBER(4)
ENAME                                              VARCHAR2(10)
JOB                                                VARCHAR2(9)
MGR                                                NUMBER(4)
HIREDATE                                           DATE
SAL                                                NUMBER(7,2)
COMM                                               NUMBER(7,2)
DEPTNO                                             NUMBER(2)I was trying to create a trigger but I was not sure what to use in the condition to check for the validation.
So, if anybody can help me that would be a real help and let me understand the concepts pretty well
Thanks and Regards
Peeyush

Hi,
What do you want to do if the sal is not in the allowed range?
The code below raises a user-defined exception:
SELECT     'OKAY'
INTO     in_range
FROM     salgrade
WHERE     :NEW.sal     BETWEEN     losal
               AND     hisal
AND     ROWNUM          = 1
IF in_range IS NULL
THEN
     RAISE sal_out_of_range;
END IF;What is the new sal is NULL? The code above allows them. If you don't want them, a NOT NULL constraint is better than a trigger.
This diesn't do exactly what you said. The code above checks to see if sal is in the allowed range on any single row of the salgrade table. If there are gaps in the table, and the new sal happens to fall into one of those gaps, this will raise the error.
For example, in the standard salgrade table, the lowest losal is 700, and the highest hisal is 9999,, but some non-integer values in that range (lsuch as 1200.5) are not BETWEEN losal and hisal on any row. I assume this is what you really want, but, if not, you can use MIN (losal) and MAX (hisal).
Edited by: Frank Kulash on Jun 13, 2011 1:10 PM
Edited by: Frank Kulash on Jun 13, 2011 1:18 PM
When I wrote the above, I hadn't seen your 2nd message.
In triggers, you need a DECLARE statement before you declare local variables, such as v_lowsal. (By the way, I would call it v_losal, to be consistent witht the column name.)
Is there a column called grade in the emp table? If not, then what is :NEW.grade?
If salgrade has more than 1 row, then SELECT ... INTO ... FROM salgrade will raise a TOO_MANY_ROWS exception, unless you put something in the WHERE clause that guarantees you'll never return more than 1 row. (That's why I used "AND ROWNUM = 1".)

Is it possible to use an answers file to automate oracle Forms installation

Hi
We want to install Forms 6i and the Open Client Adapter on several hundred pcs. We can't do it remotely as the pcs are not on our domain.
Is it possible to set up an automatic install of the components that we need so our desktop staff don't have to select the components/Oracle home etc on each install? Can an "answers file" be used to achieve this?
thanks
Paul Schweiger

Ok well I won't argue with that then :)
You may be able to create a custom installation - I did this with the Oracle ORCA package many years ago. I'm not sure whether you can do this sort of thing with the universal installer ... not sure which version 6i uses !
http://download-uk.oracle.com/docs/cd/A91202_01/901_doc/em.901/a88812/oui.htm
Message was edited by:
spilgrim

Oracle forms installation - some help need

Similar Messages

Maybe you are looking for