Oracle Forms & Report Upgrade/Migrate from 6i to 11g

Hi All,
We are planning to upgrade/Migrate from Oracle Froms and Reports 6i to 11g. Can some one please  give me an high level steps to upgrade and migrate from 6i to 11g version.
Many thanks in advance.
Kind Regards,
Mohan

hi ,
use below steps for Eliminate this issue
To start the wizard version of the Forms Migration Assistant:
1. On Windows systems, set the environment variable FORMS_PATH:
SET FORMS_PATH=%ORACLE_HOME%\forms
On UNIX systems, set the variable FORMS_PATH as in the example below:
setenv FORMS_PATH $ORACLE_HOME/forms
2.
In Windows, from the Start menu, select ORACLE_HOME | Forms Developer |Oracle Forms Migration Assistant (GUI Mode), or at the command line, start the conversion utility by entering: frmplsqlconv.bat mode=wizard.
or
in UNIX, enter frmplsqlconv.sh mode=wizard.
The Conversion Wizard Welcome dialog displays.
Regards,
Babu

Similar Messages

  • NQS ERROR:14025 NO FACT TABLE EXISTS -after migrating from 10g to 11g

    NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL in all the reports after migrating from 10g to 11g ...
    then we applied the patch (One-off Patch for Bug: 11850704) for the error <<NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL>>
    But after applying the above the above patch we are still getting the same error.
    but in the above patch instructions file - Post deployment instructions to create the Variable
    Post Install Instructions:
    - To revert to the 10g navigator behavior for handling conforming dimensions,
    you must set the following session variable via an init block in the RPD:
    NO_FORCE_TO_DETAIL_BIN=1
    The default value for the above variable is 0.
    - Restart all servers (Admin Server and all Managed Server(s))
    but we didn’t find the process to create the specified variable and Initialization block in the RPD
    Can you please suggest us how to go further.
    Our questions are:

    Hi
    Refer the below thread.
    obiee 11g non-conforming dimensions and nQSError 14025
    Might be help you/
    Thanks,
    satya

  • Upgrade Oracle Forms/Reports from 6i to 11g

    Hi you Oracle experts,
    I'm considering to upgrade my Oracle Forms/Reports application from 6i to 11g.
    However, I see dozens of separated server components on the download page in OTN.
    Can anyone guide me what server/developer software components should I prepare to install ?
    Also, please tell me the service dependency between the server components.
    Thank you in advance.

    It depends on which Machine you want to install. Its different for a developer and a Server.
    For Forms and Reports, you can Weblogic server and install FMV with Forms and Reports builders.
    For migration you can go through this link.
    http://download.oracle.com/docs/cd/E15523_01/doc.1111/e10394/toc.htm

  • Porting Forms/Reports when migrating Oracle 9i DB from AIX 5.2 to AIX 5.3

    Hi,
    Looking for advice on how to port Oracle Forms/Reports modules when moving our Oracle 9i database from AIX 5.2 to AIX 5.3 platform. Details are as below:
    Oracle Forms and Reports v6i (There is no version upgrade in Forms & Reports)
    Database is Oracle 9i (No upgrade in database)
    There is upgrade in hardware only : from AIX 5.2 to AIX 5.3
    The application is having some 8000 forms/reports modules
    Do we need to recompile the forms/reports after porting the 9i database to AIX 5.3 ?
    Any direction would be appreciated .. Thanks !!
    Regards,
    Himansu

    Hi,
    Thanks for the response, we are going to recompile the Forms/Reports in the new environemnt.
    Just wondering how much time it may take to recompile all the 8000 odd forms/reports modules.. ? Will 10 seconds per form/report module be safe enough for the compilation ? Because in a batch file every time it is going to connect to the database while compiling a module, I am assumming it may take some 5 seconds to 10 seconds for the compilation. Thanks for the help again.
    Rgds,
    Himansu

  • Oracle Forms & Reports 6i using 11g database

    Hello All,
    We are in the process of upgrading our Oracle db to 11g, yet use client/server configuration for Oracle Forms & Reports. We were able to make this scenario work.
    But, encountering one problem. When we invoke a/any report from the application's report menu it is prompting for login again ( that wasn't happening before ).
    Is this a known issue? Are ther any work-a-rounds for this issue, if so, please suggest.
    Regards,
    Vani

    Sounds like a problem with case-sensitive passwords. there are several forum-posts about that problem. Start here
    Re: Problem  during Calling report plz help

  • RUN_PRODUCT (Forms/Reports Upgrade)

    Hello,
    I have an Oracle Forms application.
    The total application is about 44 forms and 7 reports developed under Oracle Forms/Reports 6i.
    This is running in a Client/Server 2-tier model.
    I want to upgrade to the Web with Oracle 9i Database and Application Server.
    My forms use the RUN_PRODUCT modem to call Reports.
    1) Do I need to rewrite my PL/SQL code to change the RUN_PRODUCT to RUN_REPORT_OBJECT ?
    Regards,
    PT

    Paolo,
    FMA does only perform required code changes. The run_product to run_report_object conversion requires you to provide values for the Reports Server name and the access path you use on your system. Further more the migration will set a default Reports output. if you want your application to programmatically control this, you will have to add code that sets the Reports format and the destination type. The added rp2rrp.pll library has procedures for this.
    The compiler in Oracle Application Server can be used, but doesn't help if you hit a migration issue that wasn't handled by FMA. I would recommend to use the Oracle Developer Suite for migration.
    Frank
    Frank

  • Need information about Oracle Forms & Reports server installation

    Hello Friends,
    First of all I am very new user for oracle forums, So please ignore if I posted wrong place.
    We are using Oracle Database 10g and Oracle forms & Reports server 6i version.
    We just purchased oracle forms & reports (currently known as a Oracle Fusion middleware) license.  As per my knowledge latest version doesn't support Oracle 10g database.
    My question is can somebody give me Oracle Database 10g supported Forms & Reports version?
    We are planning to upgrade.
    Help would be really appreciated.
    Thanks & Regards.

    Thanks a lot for prompt response.
    I get my answer from your certification matrix.  I appreciate your response.
    Now second question arise that We are using currently Database version of 10.2.0.1.0.
    And in a certification matrix shows supported version Oracle 10.2.0.4+.
    Now I am bit confused that currently working database supports or not?
    Still i am trying to install on My window 2008 R2 with IIS 7.0.
    Let me check what happens.
    Again Thanks a lot to ccortez and PaulM  for your quick response and help.

  • Installation Guidance (WebLogic 10.3.5 / Oracle Forms,Reports 11.1.1.6)

    Goal : I am a designer/developer, have worked on already-installed systems for years, now between contracts and want/need to set up my own installation of Oracle Database 11g R2 database and development tools including Oracle Forms/Reports 11g (also SQL Developer and Application Express, but these come with the DB).
    Caveat : have not done an installation of the DB and development tools for years and I know a lot has changed.
    System : Windows 7 (64 bit), 6 GB RAM, 600 GB Hard Drive
    Here is an overview of the steps as I understand them from the documentation I've been able to find. I know there are lots of details for each step but I want to know if the overall order is right.
    1. Install DB (downloaded Oracle 11G Release 2, ready to install Enterprise Edition).
    2. Install Repository Creation Utility 11g Release 1 (11.1.1.5.0) to set up the schemas for Fusion Middleware
    ** QUESTION ** where on earth does one find this? Anyone have a link for it? Or does it come with a larger patchset/installation set?
    3. Install Oracle WebLogic Server 11g (10.3.5)
    4. Install Oracle Portal, Forms, Reports and Discoverer Release 11g (11.1.1.2.0) but do not configure (advice given in documentation for 11.1.1.6 Patchset)
    5. Install and Configure 11.1.1.6 Patchset
    Any comments or suggestions welcome. Hope to avoid pitfalls if possible.
    Thanks in advance !
    Peter

    It is not recommended and certified. Please refer the certification matrix -
    http://www.oracle.com/technetwork/middleware/downloads/fmw-11gr1certmatrix.xls
    . Oracle Fusion Middleware 11.1.1.1.0 is certified with WebLogic Server 10.3.1.
    . Oracle Fusion Middleware 11.1.1.2.0 is certified with WebLogic Server 10.3.2.
    . Oracle Fusion Middleware 11.1.1.3.0 is certified with WebLogic Server 10.3.3.
    . Oracle Fusion Middleware 11.1.1.4.0 is certified with WebLogic Server 10.3.4.
    . Oracle Fusion Middleware 11.1.1.5.0 is certified with WebLogic Server 10.3.5.
    Regards,
    Anuj

  • Oracle forms & reports support on oracle 10g lite

    Currently our oracle forms & reports 6i application works on oracle 8i database with oracle 9i lite.
    We upgraded our database to oracle 9i r2 and lite to 10gr2.
    After publishing the application when i try to open the application the forms screen disappears for ever.
    I wanted to know whether oracle forms and reports 6i is supported on
    oracle 10g lite r2?
    Thanks,
    Ashok Kumar.G

    No. Not only it isn't certified, but it is also impossible to run forms compiled with the 11g compiler with the 10g runtime. For 11g there is a install bundle for the developer suite / application server.
    cheers

  • What oracle forms / reports version are using in EBS R12?

    Hi all,
    We are planning to upgrade to EBS R12. what oracle forms / reports version are using in EBS R12?
    Thanks.

    Hi,
    Forms and Reports 10.1.2.x are used by Oracle Applications Release 12.
    Note: 437878.1 - Upgrading Forms and Reports 10g in Oracle Applications Release 12
    Oracle Applications Concepts
    http://download.oracle.com/docs/cd/B53825_03/current/acrobat/121oacg.pdf
    upgrade forms reports R12
    http://forums.oracle.com/forums/search.jspa?threadID=&q=upgrade+forms+reports+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • Install Oracle Form/Report 6i Developer

    Hi all,
    Just confirm:
    I've downloaded d2k6irelease2.tar from http://www.oracle.com/technology/software/products/forms/htdocs/linuxsoft.html. Is that the right one for Oracle Form/Report 6i Developer? If not, please let's me know where can i find the Oracle Form/Report 6i Developer Software and installation guide?
    thanks in advance

    Grant Ronald,
    Do you know exactly version? I'm looking for 6.0.8
    thanks

  • Oracle Portal, Application Express, Oracle Forms/Reports 10g - which one?

    Hi,
    I have Oracle 10g database and Application Express installed on one linux box.
    second linux box has Oracle HTTP server running from where i call the htmldb pages.
    3rd linux box has Oracle Application Server 10.1.2 installed along with SSO, Portal 10.1.4 , Forms Server etc.
    Now, i see there are 3 ways i can develop web applications
    1. using Application Express and http server which is very basic and simple.
    2. using Oracle Forms/Reports 10g and forms/reports server
    3. Oracle Portal 10.1.4 in Application Server 10.1.2
    Can someone guide me, which one of the above 3 is worth sticking on forever for developing web applications. i am really not sure which one of the above is best for Web developement in terms of long term planning. and i believe all 3 of the above can be integrated with Oracle SSO for authentication.
    Can someone guide me please to select one of the above and can you explain me why for my better understanding of the different tools?
    Thanks,
    Philip.

    Hi Philip.
    If you already have Oracle Portal, I think that portal is the best solution.
    Portal can be integrated with others applications using SSO.
    Oracle portal have a lot of features that help you to develop web applications.
    If portal does not offer what you want, you can develop your own portlets using java or plsql.
    Take a look at the default home page of oracle portal.
    Look better the features that portal offer to you.
    http://portalcenter.oracle.com
    Thanks.

  • How to add a new font into Report Builder and Oracle Forms/Reports Server?

    Hi,
    I've searched the forum and can't find this being discussed.
    My developers run Report Builder 10.1.2.0.2 on their XP laptops.
    Their reports run (in production) on Oracle Forms/Reports Server 10.1.2.0.2.
    This server runs on MS Windows 2003, SP2.
    They've got a client who wants reports using the "Garamond Western" font.
    So....how do I get this font onto the developer's Report Builder laptops, and onto the Oracle Forms/Reports Server?
    I've moved various 'Garamond' fonts into C:\WINDOWS\FONTS on both the laptops and the server, but neither seem to recognize it.
    Thanks for your help.

    Thanks.
    This answers 1/2 of my question.
    The developer can now use Report Builder on his laptop, with the new fonts.
    But when he moves this new Report to the Oracle Application Server/Forms-Reports Server, it fails to use the new fonts.
    The Oracle App Server/Forms-Report Server is Version 10.1.2.0.2. It runs on MS Windows 2003, SP2.
    I have installed the exact same fonts on this server, into C:\WINDOWS\Fonts.
    I have used REGEDIT to change REPORTS_PATH....and placed C:\WINDOWS\Fonts; as the first value in this field.
    I have then stopped and restarted the Forms-Reports Server.

  • How to deploy Oracle Forms & Reports in Weblogic Server 11g (10.3)?

    Hi
    How to deploy Oracle Forms & Reports in Weblogic Server 11g (10.3)?
    Thanks

    Hi
    when i am going through your bleow link.
    I am not able understand the 3.3.1 step :2
    http://download.oracle.com/docs/cd/E15523_01/web.1111/e10240/basics.htm#i1010040
    edit this file in the Web Configuration,
    configuration of an application called "my_application" with a form module called "form=hrapp.fmx":
    can deploy only.fmx file ?
    if not how to find the realation between my_application and hrapp.fmx ?
    Thanks in Adavance
    Regards
    Ram

  • How to Print form using SAP Smart Forms which is migrated from SAP Script?

    Hello every one,
         i have a problem in printing form using smart form which is migrate from the SAP Script...so what method i have to use...if any one know the solution for this than plz reply me as soon as possible...

    hi
    when ever u want to migrate the script to smartform u have to chage the driver program also..
    refere this link to convert script to smartform
    convert sapscript to smartform
    c_formname = u r smartform name...
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
      EXPORTING
        formname           = c_formname
      IMPORTING
        fm_name            = v_fm_name
      EXCEPTIONS
        no_form            = 1
        no_function_module = 2
        OTHERS             = 3.
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ...........................CALL SMARTFORM............................
    CALL FUNCTION v_fm_name
      EXPORTING
        control_parameters   = st_control_parameters
        output_options       = st_output_options
      IMPORTING
        document_output_info = st_document_output_info
        job_output_info      = st_job_output_info
        job_output_options   = st_job_output_options
      EXCEPTIONS
        formatting_error     = 1
        internal_error       = 2
        send_error           = 3
        user_canceled        = 4
        OTHERS               = 5.
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.

Maybe you are looking for