Oracle forum point detail
hallow all,
I am one of the oracle forum member but i want know about my point(pts) details,kindly help me how will get my current points
Edited by: sasi on Oct 31, 2011 9:57 PM
You click on your own username and view your profile which will tell you how many points you have. At present it appears you don't have any.
For example, if you look at my profile...
>
Handle: BluShadow
Email:
Status Level: Guru (13,690)
Registered: Sep 21, 2005
Total Posts: 19,325
>
The points are shown next to the Status Level.
Similar Messages
-
I've dealt with Oracle Forums before, I think not. It's been nice... see ya around.
morgalr wrote:
raychen wrote:
I have not used Oracle Forums before, so tell me why you are not willing to migrate other than losing all of your Dukes.Unless they have wildly remodeled the resource in the last 6 months, I do not like the software they use for their search, nor the look and feel of their board. The entire interface is counter intuitive to me, and frustrated me greatly the entire time I tried to use it for support for my Oracle 9 and 10 products. I finally just started doing Google searches to get my questions answered, even thorugh we paid Oracle for support of our products.
I only liked the Sun forum searches ever for about 6 months or so. I believe that was when they were specifically using google searches for the back end (I think it said something to that effect.)
Other than that it was always useless.
When we were looking at DB's several years ago, I championed Sun and Oracle as our business solution, and our company migrated to it. I have been the one since that is the access point to Oracle support, and to be blunt, I've not been pleased. At this point, now several years down the road, our company, partially on my recommendation, is having a clean break from Oracle and their business philosophy, so it just is not likely that I will venture over into the Oracle Forums again.
If they follow through with their philosophy from the past, everyone that registers for the forums will probably start getting Oracle ads, and I have at times, even been SPAMMED from their business partners--I've been told by Oracle that it was a mistake, but yet, I am still getting SPAMMED from their partners. I've had to put all of Oracle on my SPAM list.Take a lesson from here when Sun messed up the forums - complain to the ISP provider rather than Oracle. That can lead to Oracle being marked as a spam source. And one might suppose that is something that they do not want to happen. -
Forum Points Status...
For details on this from SDN (Mark Finnern) please see here:
Forum Points Status ...Thanks for the link Bhanu. Should I assign points for this help??? )
~ Vaishnav -
Hi All,
I need a link to download oracle forums.Whether i can download it?
If yes,can you please provide me a link.
If NO,Please suggest me any other open source forums,
Thanks for your time..Hello Hans Forbrich and yingkuan
You got my point,I was looking for an forums which is somewhat like oracle forums.
Hans and ying-thanks for the responce.
Hans,
I am able to download communtity forums from http://www.oracle.com/technology/products/database/application_express/packaged_apps/packaged_apps.html#FORUM .Thanks i was looking for this kind of forum.
Now,I think i need to download Application Express.I hope this should be fine..Or is there any other software i need to download to setup community forum?
Please let me know if you are not clear with my point.
Thanks
Message was edited by:
SantoshSS -
Hi all!
Just for your information: handle Faust don't exists anymore and I decide to leave all Oracle Forums.
Anyway, if any of you my friends need my help or advice you can reach me at:
[email protected]
Cheers!ENV_RECOVERY - suppresses running recovery at Environment creation. Internal parameter.
ENV_RUN_INCOMPRESSOR, ENV_RUN_CHECKPOINTER, ENV_RUN_CLEANER - disable the INCompressor, Checkpointer, and Cleaner Daemon threads.
You should not need to adjust any of these parameters for your DbBackup utility. In fact, ENV_RECOVERY is an "internal use only" parameter.
PS: I've forgot to mention that I'm running a quite old version: 2.1.30
I'm sorry to be the bearer of bad news, but as my colleague Mark Hayes stressed in a previous post, you really need to upgrade from 2.1.30 to 3.3.latest. It is highly probable that you will eventually run into bugs with 2.x and we are unlikely to (1) be willing to diagnose them, and (2) fix them. As Mark pointed out, 2.1 is 3.5 years old and the product has had a lot of improvements in that time. We are happy to answer questions on this forum relating to the latest major release, but dealing with old and crusty code is certainly going to be well below our allowable priority level.
Charles Lamb -
No information under link "Forum points" anymore
Hello,
formerly I saw under the link "forum points" in the thread contribution of a SDN member, which forum items were rewarded of this author. But this isn't working anymore. Meanwhile I only see all contributions of this member. I would like to know why the functionality "Forum points" was cancelled allthough it was very interesting to know which rewarded contributions a certain author has to offer?
Regards
Martin LehmannIf you are referring to viewing the users "contributions" when you click that link - each user has to "select" to show that in their user profile.
-
Customer shipping point details
Hello All,
I am trying to create sap query containing customer shipping point details.The format is like..
comp code, cust no, cust name,house bank, shipping point, name of the agent,route etc.
what are the tables I can use. please help
SrinivasHi,
Table Field
Company Code BKPF BUKRS
Customer No. BSEG KUNNR
House Bank BSEG HBKID
Shipping Point V_TVST VSTEL
Agent Name V_TVPG_TK PARGR (Partner)
Route V_TVRO_COM ROUTE
Regards,
Sadashivan -
Unzipping the file downloaded from Oracle forum
Dear All,
Hope im in the right discussion room.
I downloaded the Oracle 11g from Oracle Forum (special thanks to Oracle) but i also saw that it has a special unzipping software to unzip the downloaded files.
Can i use the WinZip to unzip or any other softwares to be used to unzip.
I am using Windows 7 ultimate.
Any help would he highly appreciated.Hi;
>
Hope im in the right discussion room.
I downloaded the Oracle 11g from Oracle Forum (special thanks to Oracle) but i also saw that it has a special unzipping software to unzip the downloaded files.
Can i use the WinZip to unzip or any other softwares to be used to unzip.
I am using Windows 7 ultimate.If your download file extantion is zip than yuo can use Winzip wihtout any issue
Regard
Helios -
How to get the shipping point details nothing but (name , address, etc)
Hi, i am having the billing document number from that i am fetching the delivery doc number and shipping point.
how i can get the shipping point details from the shipping point number.in which table i need to pass this shipping point number(VSTEL)?Hi Praveen,
TVST Shipping point
KNVS Customer Master Shipping Data
VTTK Shipment header
VTTP Shipment item
VTFA Flow shipping documents
TVSTZ Organizational Unit: Shipping Points per Plant
B024 Shipping point
TVSRO Shipping points: Countries in Which Routes are Defined
TVSWZ Shipping Points per Plant
You can get the details from ADRC table. Please note that the TVST table has got a field ADRNR, pls use the same field in identifying the number and goto ADRC table enter the number under the ADDRNUMBER. It will fetch the address details for you.
For ex from the standard SAP: I have taken std 0001 shipping pt. When I run TVST table for shipping points I get to see that ADRNR field has 297 as the number. I take the same number 297 and goto ADRC table and enter it under ADDRNUMBER and it will give me the address details entered for shipping pt 0001.
(or)
All Standard Reports which are available are as under:
SAP Easy Access: Information Systems -> Logistics -> Sales and distribution ->
Shipping point -> Deliveries / Returns
Shipping point Analysis - MC(U
Shipping point Analysis-Returns - MC-O
Reward if helpful,
Regards,
Harini.S -
Forum Point Status ...
Hi Fellow ABAPers,
I have been asked to link to the Forum Points Status ... there.
In general if you would like to know what people are thinking about the activities in the forum there is always a lively discussion going on there about it.
As far as I recall this is my first and only post in the most active forum of all. I am humbled by all the knowledge that is exchanged here.
I will not open this thread to avoid having more than one discussion. If you want to post something please add it to the thread in the Coffee Corner.
All the best, Mark.Greetings fern3887, and welcome to the Best Buy forum!
It appears that your BestBuy.com and My Best Buy™ accounts are currently linked, so you are referring to the email with a verification code. We may just need to double check that your information is up-to-date or potentially reset your BestBuy.com password.
I would like to go over your account with you and gather some additional information, so I will be sending you a private message. To check your private messages, you will want to login to the forum and click on the little yellow envelope at the top of the page.
Thank you for posting and for being a My Best Buy™ member.
Derek|Social Media Specialist | Best Buy® Corporate
Private Message -
How does Oracle AIA pull details from SOA Suite on installation?
Quite urgent help:
How does Oracle AIA pull details from SOA Suite during installation?
We're encountering an issue with installation of Oracle AIA at step 4. This when providing the SOA Server Details, and the managed server shows:
"Cannot Connect to Server" error.
However at the weblogic console, the Admin server and manage server: soa_server1 are running. Please provide us help on this.
For further details, here are the apps and versions we installed:
* Oracle Fusion Middleware 11g
* SOA suite
* Oracle AIA 11g
* Weblogic 10.3.4.0
Thanks!
-tristan
Edited by: user8089513 on May 16, 2011 4:58 AMHello,
Thanks for the reply!
On my end, i haven't started it yet today, it just leads me to this message when running node manager:
+<May 17, 2011 3:40:51 PM GMT+08:00> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>+
+<May 17, 2011 3:40:52 PM> <INFO> <Secure socket listener started on port 5556, host /10.234.182.26>+
May 17, 2011 3:40:52 PM weblogic.nodemanager.server.SSLListener run
INFO: Secure socket listener started on port 5556, host /10.234.182.26
Should you need to check the nodemanager.properties, here are the details:
#Fri May 13 10:56:04 GMT+08:00 2011
DomainsFile=C\:\\Oracle\\MIDDLE~1\\WLSERV~1.3\\common\\NODEMA~1\\nodemanager.domains
LogLimit=0
PropertiesVersion=10.3
DomainsDirRemoteSharingEnabled=false
#javaHome=C\:\\Oracle\\MIDDLE~1\\JROCKI~1.1-3
#JavaHome=C\:\\Oracle\\MIDDLE~1\\JROCKI~1.1-3\\jre
JavaHome=C\:\\Oracle\\MIDDLE~1\\JDK160~21\\jre
javaHome=C\:\\Oracle\\MIDDLE~1\\JDK160~21
AuthenticationEnabled=true
NodeManagerHome=C\:\\Oracle\\MIDDLE~1\\WLSERV~1.3\\common\\NODEMA~1
LogLevel=INFO
DomainsFileEnabled=true
StartScriptName=startWebLogic.cmd
ListenAddress=10.234.182.26
NativeVersionEnabled=true
ListenPort=5556
LogToStderr=true
SecureListener=true
LogCount=1
DomainRegistrationEnabled=false
StopScriptEnabled=true
QuitEnabled=false
LogAppend=true
StateCheckInterval=500
CrashRecoveryEnabled=false
StartScriptEnabled=true
LogFile=C\:\\Oracle\\MIDDLE~1\\WLSERV~1.3\\common\\NODEMA~1\\nodemanager.log
LogFormatter=weblogic.nodemanager.server.LogFormatter
ListenBacklog=50
When I check the weblogic console, i manually run the managed server using startManagedWebLogic.cmd.
Please advise. Do really need help on this.
Thanks!
-tristan -
This forums is mostly similar to oracle forums
It is the first time I visit this forum.
I feel this forum is 90% like oracle's forum.
Is this forum is same developer between this and oracle's one?If you are asking are the same people here? Yes, some of the same people are here, but I rather doubt 90 percent of the people here are also in the Oracle Forums.
If you are saying the forum formats look the same: yes, as already brought up, many of the forums look the same and may even use the same software.
If you are saying that the content of these forums and the Oracle forums are 90 percent the same, then I would totally disagree with you: almost all of these forums do not even mention Oracle and over on Oracle a vast majority of the forums do not mention Java. -
Use of Forum Points....
Hello everyone,
Since i registered for SDN i m seeing people who earned lot of forum points....few has in the range of 10000 also ....are these points really helpful in future ??...and in which manner these points will help ??
thnx.thnx....
-
Dear all,
i have a requirement where i need to find out the shipping point details from the value likp-vstel.
help would be rewardedHi,
Please try tables TVST, TVSTT and TVSWZ.
Also please check FM SHP_TVST_SELECT_01 and ST_LOCATION_ADDR_GET.
Regards,
Ferry Lianto -
Query or command to find installled Oracle S/w details ...
Hello Good Morning !
*[oracle@rhel5 db_1]$ uname -m*
i686 my os is 32 bit
So i tried to find installed oracle S/w details ..
is installed oracle 32 bit or 64 bit ?- I tried with many ways .. no way to find.
MY DB version details ..
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Prod
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for Linux: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
I tried with this link : http://www.orafaq.com/node/2033
i could not find out. please see here ..[oracle@rhel5 ~]$ cd $ORACLE_HOME
[oracle@rhel5 db_1]$ cd bin/
[oracle@rhel5 bin]$ ls -l oracl*
-rwsr-s--x 1 oracle oinstall 96789129 Apr 22 16:52 oracle
-rwxr-x--- 1 oracle oinstall 0 Feb 17 2008 oracleO
*[oracle@rhel5 bin]$ vi oracle*
- *[ VERY BLIND and LOOKS LIKE EMPTY FILE ]*
Thanks in advance ..
Edited by: 969352 on May 29, 2013 2:38 AM969352 wrote:
Hello Good Morning !
*[oracle@rhel5 db_1]$ uname -m*
i686 my os is 32 bit
So i tried to find installed oracle S/w details ..
is installed oracle 32 bit or 64 bit ?
How could 64bit Oracle be installed on a 32bit OS ?
That said, you could check the binary:
file $ORACLE_HOME/bin/oracle
/appl/oracle/product/10.2.0/bin/oracle: *ELF-64* executable object file ...Nicolas.
I realized that no where in the link you provided, it is said to "vi" on oracle bin... how does it come to your mind then ?
Edited by: N Gasparotto on May 29, 2013 11:50 AM
Maybe you are looking for
-
How to save iTunes library from failing internal drive?
How does one go about doing this? My internal drive is making noise (and I suspect about to fail), so I'm trying to save my itunes library...I have already switched default drive to my external, but as I understand it some info is still saved on my i
-
I have up dated my mac to OSX 10.9.5 and now the printer is not working
After updating my imac to OSX 10.9.5 my HP Photosmart C4580 is not working ,please advise
-
PO condition type calculation formula.
Dear there, Hallo, i going to develop a customize create Purchase order screen (same like ME21n), and i facing a problem in the condition type calculation part, because i dun know how to get the formula of each condition type calculation so i c
-
IPhoto Library disappeared after update
Just updated to 10.4.9. It appeared to go fine, but when I opened iPhoto, the message came that "Photo Library not Found". Used Spotlight, but can't locate anything. In fact, it seems that the whole Pictures Folder has vanished. Interestingly, my wif
-
I created a business area that is already live, but I mereged the underlying table with another table(which of course hase some data in it)in the database. Now the question is how do I modify my business area in discoverer to see this new data other