Oracle forum watch : please send mail with subject as the question
Hi Site Administrator,
The oracle forum send a mail if we are watching any topic. Earlier the subject was named as the question subject , which was very helpful.
Now we are gettting the mail with subject as the topic name ex java programming, new to java etc.
With the current form we have to see inside each mail to know what is the question asked. Earlier from the subject itself we were able to find what is/may be the question. Which has helped to easily and quickly scan through. So please change this new pattern to old pattern. Since that is the best practice.
Hi moderator
Please put my question in the suitable section if it is not placed in the right one.
793619 wrote:
Hi moderator
Please put my question in the suitable section if it is not placed in the right one.Put it there yourself.
Community Feedback (No Product Questions)
The Java and Solaris moderators aka community moderators are not authorized to move content anywhere and everywhere on forums.oracle.com. In future, please check the forum listings and find the correct forum to post to.
I'm locking this thread and it will be removed later.
db
Similar Messages
-
Send mail with attachment from the uploaded file
hi,
From a form thread i got the following code to send mail with attachment with the file uploaded from the file upload ui element.
public void onActionLoadFile(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
//@@begin onActionLoadFile(ServerEvent)
WDWebResourceType FileType = null;
String FileName = new String();
//get attribute info for context attribute 'FileUpload'
IWDAttributeInfo attributeInfo =
wdContext.getNodeInfo().getAttribute(
IPrivateEmailView.IContextElement.FILE_UPLOAD);
//get modifiable binary type from the attribute info,requires type cast.
IWDModifiableBinaryType binaryType =
(IWDModifiableBinaryType) attributeInfo.getModifiableSimpleType();
IPrivateEmailView.IContextElement element =
wdContext.currentContextElement();
//if a file in the 'FileResource' attribute exists
if (element.getFileUpload() != null) {
try {
String mimeType = binaryType.getMimeType().toString();
byte[] file = element.getFileUpload();
//get the size of the uploaded file
element.setFileSize(this.getFileSize(file));
//get the extension of the uploaded file
element.setFileExtension(binaryType.getMimeType().getFileExtension());
//NOTE: context attribute 'FileName' must not be set
//because the FileUpload-UI-element property 'fileName'
//is bound to it. Consequently the fileName is automatically
//written to the context after file upload.
//report success message
wdComponentAPI.getMessageManager().reportMessage(
IMessageEmailComp.SF_UPLOAD,
new Object[] { binaryType.getFileName()},
false);
FileType = binaryType.getMimeType();
FileName = binaryType.getFileName();
} catch (Exception e) {
throw new WDRuntimeException(e);
//if no file in the 'FileResource' attribute exists
else {
//report error message
IWDMessageManager msgMgr = wdComponentAPI.getMessageManager();
msgMgr.reportContextAttributeMessage(
element,
attributeInfo,
IMessageEmailComp.NO_FILE,
new Object[] { "" },
true);
//clear the FileResource context value attribute
//element.setFileUpload(null);
String URL;
URL = this.CreateAndGetPathFileUpload(
wdContext.currentContextElement().getFileUpload(),
FileName);
// if (URL.length() == 1){
// //ERRORE
wdContext.currentContextElement().setPATHFileUploaded(URL);
//@@end
public boolean send( java.lang.String subj, java.lang.String mess, java.lang.String dest, java.lang.String attach, java.lang.String FileName )
//@@begin send()
InitialContext ctx = null;
Address[] address = null;
Message msg = null;
Session sess = null;
MimeBodyPart bodyPart = null;
Multipart mp = null;
// "141.29.193.71" == milvl2ja.icn.siemens.it (SMTP di Siemens)
try {
Properties props = new Properties();
props.put("domain","true");
ctx = new InitialContext(props);
sess = (Session) ctx.lookup("java:comp/env/mail/MailSession");
msg = new MimeMessage(sess);
IWDClientUser utente = WDClientUser.getCurrentUser();
String senderEmail = utente.getSAPUser().getEmail();
InternetAddress addressFrom = new InternetAddress(senderEmail);
msg.setFrom(addressFrom);
String EmailDEST = dest;
InternetAddress addressTo = new InternetAddress(EmailDEST);
msg.setRecipient(Message.RecipientType.TO, addressTo);
msg.setSubject(subj);
// if ((mess != null) && (mess.length()>0)) {
// msg.setContent(mess, "text/plain");
// } else {
// msg.setContent("", "text/plain");
//Gestione ATTACHMENT...
String attachedFileName = new String(wdContext.currentContextElement().getFileName());
boolean hasAttachment = (attachedFileName != null) && (attachedFileName.length() > 0);
boolean isMultiPart = (mess != null) && (mess.length() > 1);
//adding an attachment makes the message multipart
if (isMultiPart || hasAttachment) {
mp = new MimeMultipart();
// add text parts
if (mess != null) {
for (int i = 0; i < mess.length(); i++) {
bodyPart = new MimeBodyPart();
bodyPart.setContent(mess,"text/plain");
mp.addBodyPart(bodyPart);
//attach the file to the message if needed
if (hasAttachment) { // avoid the case with no text parts
bodyPart = new MimeBodyPart();
bodyPart.setContent("Allegato incluso nel messaggio.","text/plain");
mp.addBodyPart(bodyPart);
// the part with the file
FileDataSource fds = new FileDataSource(attach);
MimeBodyPart attachmentBodyPart = new MimeBodyPart();
attachmentBodyPart.setDataHandler(new DataHandler(fds));
//URL URLattachedFileName = new URL(attach);
//attachmentBodyPart.setDataHandler(new DataHandler(URLattachedFileName));
attachmentBodyPart.setFileName(FileName);
mp.addBodyPart(attachmentBodyPart);
msg.setContent(mp);
} else {
if ((mess != null) && (mess.length() > 0)) {
msg.setContent(mess, "text/plain");
} else {
msg.setContent("", "text/plain");
//fine ATTACHMENT
msg.setSentDate(new GregorianCalendar().getTime());
msg.saveChanges();
address = msg.getAllRecipients();
Transport.send(msg, address);
} catch (Exception e) {
e.printStackTrace();
return false;
return true;
//@@end
When i used the same code in my application i am gett ing error in many places..
1)FileDataSource fds = new FileDataSource(<b>attach</b>);
attach cannot be resolved
2)attachmentBodyPart.setFileName(<b>FileName</b>);
fliename cannot be resolved
3)byte[] file = element.getFileUpload();
type mismatch cannot convert sting to byte[]
4)element.setFileSize(this.getFileSize(file));
method getFileSize() is undefined
5)element.setFileExtension(binaryType.getMimeType().getFileExtension());
method getFilExtension() is undefined
6)URL = this.CreateAndGetPathFileUpload(wdContext.currentContextElement().getFileUpload(),FileName);
method CreateAndGetPathFileUpload() is undefined.
7)wdContext.currentContextElement().setPATHFileUploaded(URL);
from the above error i can understand that only i have got the part of the code.
Please send me the complete coding.
some method definitions are missing....
Please help me to send the mail with attachment from the file uploaded from the file upload ui element.
Thanks in advance,
shami.hi,
I got this from the following link
Re: Attaching an excel file
plz help me ...
I am using 2004s with nwds 7.0.06.
also tell me what should be the type of the context variable FileUpload
Thanks in advance,
shami. -
How to config SAP to send mail with autentication
I'm trying to send emails using SAP, and I've manage to do it, I configurated the smtp server in SCOT transaction, sap conects to it and send's emails.
however some emails are blocked because I don't use any kind of authentication. How can I config that?Hi,
How to config SAP to send mail with autentication
friend you questionis already discussed in one of sdn thread.please search once the forum then apply Qn. on SDN.
this time i can help you but please next time onwards serch first on SDN forums.
Mail Server
Thnks
Mhn -
Sending mails with attachments using oracle 8i
Hi,
Could anybody please send a sample code for sending mails
with attachments using oracle 8i.
Thanks in advanceFor oracle8i there is an example package from OTN:
http://www.oracle.com/technology/sample_code/tech/pl_sql/htdocs/Utl_Smtp_Sample.html
You have to re-write the package a bit to work it with BLOBs instead of RAW attachments, but that should be no problem
Hop this helps,
Michiel -
Send mails with csv file as an attachment through oracle(SQL SCripts / Stor
Hello Everybody,
I have recently come across a requirement in which I am supposed to send mails with csv file as an attachment through oracle(SQL SCripts / Stored Procedure) .
The contents of the csv file are to be retreived from the Database as well as the content of the mail and to whom it needs to be sent has also to be picked up from the database.
Can somebody suggest me with a suitable code for the same?
Would be of great help..!!
Thanks & Regards,
- VR
Edited by: user646716 on Dec 18, 2009 10:44 AMread below links
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:255615160805
http://www.orafaq.com/wiki/Send_mail_from_PL/SQL#Send_mail_with_UTL_TCP_-withattachments
How to send csv file as an attachment -
Sending Mail with attachment and preserving the order of attachment
Hi Everyone!!!!!!
My requirement is to send Email with attachment in the same order as they were attached by Sender while composing the mail. I want to preserve order of attachment in the mail and when receiver open a mail, the attached files should be reflected in same order as it was on sender side. In my application,the documents being upload are already in my database. So, user just requires to mark the corresponding check box and enter the Sequence number for each attachment. When he clicks on "SEND" button, the Source file is first written from database to OS level and then files are attached from source available on OS . The attached file name could be anything. Based on the Sequence number file should be attached and send. My current code works fine,but problem it is that the Sequence number is not preserved in my attachment . However, when I traced the output of FOR Loop by inserting it in a table " temp_trace" I found that the Sequence is preserved in the order that I want. So, I think that uploaded files are written on the Operating system in same order but they are not attached in same order. Below is the sample code that is I am using to attach file in email. Here, the user_sequence is the sequence number entered by user.
for i in (select case when user_sequence is not null
then trim(to_char(user_sequence ,'09'))||'_'||file_name||'.pdf'
else ||'_'||file_name||'.pdf' end file_name ,
file_src,length(file_src) len,cd.doc_id,PRIORITY from
MIM_CLIENT_DOCS CD,(select DOC_ID ,user_sequence from table P_DOC_AND_user_sequence ) TEMP_TAB
WHERE CD.DOC_ID = TEMP_TAB.DOC_ID order by case when user_sequence is null then 1 else 0 end, file_name)
loop
insert into temp_trace values(i.file_name);
L_OUT := UTL_FILE.FOPEN(v_oracle_dir,i.file_name,'wb',32760);
end loop;
I want my output as
1_first attachment.txt
2_second_attachment.docx
3_abc.sql
_xxx.txt ------------------ When sequence is not assigned by user That is null at last.
Unfortunately, I am not getting attachment in mail in this sequence. Can anyone give me suggestion.
Sorry for stuff essay and thanks in advance!!!!!!!!!!!>
Please update your forum profile with a real handle instead of "974850".
My requirement is to send Email with attachment in the same order as they were attached by Sender while composing the mail. I want to preserve order of attachment in the mail and when receiver open a mail, the attached files should be reflected in same order as it was on sender side. In my application,the documents being upload are already in my database. So, user just requires to mark the corresponding check box and enter the Sequence number for each attachment. When he clicks on "SEND" button, the Source file is first written from database to OS level and then files are attached from source available on OS . The attached file name could be anything. Based on the Sequence number file should be attached and send. My current code works fine,but problem it is that the Sequence number is not preserved in my attachment . However, when I traced the output of FOR Loop by inserting it in a table " temp_trace" I found that the Sequence is preserved in the order that I want. So, I think that uploaded files are written on the Operating system in same order but they are not attached in same order. Below is the sample code that is I am using to attach file in email. Here, the user_sequence is the sequence number entered by user.Always post code using <tt>\...\</tt> tags as described in the FAQ.
for i in (select case when user_sequence is not null
then trim(to_char(user_sequence ,'09'))||'_'||file_name||'.pdf'
else ||'_'||file_name||'.pdf' end file_name ,
file_src,length(file_src) len,cd.doc_id,PRIORITY from
MIM_CLIENT_DOCS CD,(select DOC_ID ,user_sequence from table P_DOC_AND_user_sequence ) TEMP_TAB
WHERE CD.DOC_ID = TEMP_TAB.DOC_ID order by case when user_sequence is null then 1 else 0 end, file_name)
loop
insert into temp_trace values(i.file_name);
L_OUT := UTL_FILE.FOPEN(v_oracle_dir,i.file_name,'wb',32760);
end loop;I want my output as
1_first attachment.txt
2_second_attachment.docx
3_abc.sql
_xxx.txt ------------------ When sequence is not assigned by user That is null at last.
Unfortunately, I am not getting attachment in mail in this sequence. Can anyone give me suggestion.I see no code that attaches anything to email messages. What code is used to do this? Why are the files being written to the file system? -
Sending mail with multiple attachments
hi.I wrote a code to send mail.but i need to send mail with multiple attachments.here is the code i wrote.what should i do to send the mail with multiple attachments.if i run this code iam able to send mails but not attachments.please help me
<%@ page import="javax.mail.*,javax.mail.internet.*,java.util.Date,java.io.*,java.net.InetAddress,java.sql.*,java.util.Properties,java.net.*,javax.sql.*,javax.activation.*,java.util.*,java.text.*" %>
<%@ page import="java.io.*,java.sql.*,java.net.*,java.util.*,java.text.*" %>
<%
String Attachfiles1="";
String Attachfiles2="";
String Attachfiles3="";
if("Send".equalsIgnoreCase("send"))
try
String subject="",from="",url = null,to="";
String mailhost = "our local host";
Properties props = System.getProperties();
String msg_txt="";
String strStatus="";
// byte[] bin=.....;
//Adds Attechment:
Multipart multipart = new MimeMultipart();
BodyPart messageBodyPart = new MimeBodyPart();
messageBodyPart.setText("Here are my attachments");
multipart.addBodyPart(messageBodyPart);
messageBodyPart = new MimeBodyPart();
//first attachment
DataSource source = new FileDataSource("C:\\img1.jpg");
messageBodyPart.setDataHandler(new DataHandler(source));
messageBodyPart.setFileName("C:\\Telnor1.jpg");
multipart.addBodyPart(messageBodyPart);
//Second attachment
DataSource source2 = new FileDataSource("C:\\img2.jpg");
messageBodyPart.setDataHandler(new DataHandler(source2));
messageBodyPart.setFileName("C:\\Telnor2.jpg");
multipart.addBodyPart(messageBodyPart);
//etc...
message.setContent(multipart);
Transport.send( message );
String mailer = "MyMailerProgram";
to=request.getParameter("to");
from=request.getParameter("from");
subject=request.getParameter("subject");
msg_txt=request.getParameter("message");
props.put("mail.smtp.host", mailhost);
Session mailsession = Session.getDefaultInstance(props, null);
Message message = new MimeMessage(mailsession);
message.setFrom(new InternetAddress(from));
message.setRecipients(Message.RecipientType.TO,InternetAddress.parse(to, false));
message.setSubject(subject);
message.setHeader("X-Mailer", mailer);
message.setSentDate(new Date());
message.setText(msg_txt);
BodyPart messageBodyPart = new MimeBodyPart();
BodyPart messageBodyPart2 = new MimeBodyPart();
Multipart multipart = new MimeMultipart(); // to add many part to your messge
messageBodyPart = new MimeBodyPart();
javax.activation.DataSource source = new javax.activation.FileDataSource("path of the file");
messageBodyPart.setDataHandler(new DataHandler(source));
messageBodyPart.setFileName("file_name");
messageBodyPart2.setText("message"); // set the txt message
multipart.addBodyPart(messageBodyPart);
multipart.addBodyPart(messageBodyPart2);
Transport.send(message);
out.println("Message Sent");
catch (Exception e)
e.printStackTrace();
if("Attachfiles".equalsIgnoreCase("attachfiles"))
Attachfiles1=request.getParameter("fieldname1");
Attachfiles2=request.getParameter("fieldname2");
Attachfiles3=request.getParameter("fieldname3");
%>
<html>
<body>
<div class="frame">
<form action="Composemail.jsp" method="post">
<b>SelectPosition:</b> <select name="cars" >
<option value="ABAP">ABAP
<option value="saab">Saab
<option value="fiat">Fiat
<option value="audi">Audi
</select><br><br>
<table border="1" cellpadding="2" cellspacing="2">
<tr><th>Name</th>
<th>EmailId</th>
<th>ContactNumber</th>
<th>Position</th>
</tr>
<tr>
<td>
</td>
</tr>
</table><br>
<b>SelectUser :</b><select name="cars">
<option value="Administrator">Administrator
<option value="saab">Saab
<option value="fiat">Fiat
<option value="audi">Audi
</select>
<br>
<b>To :</b>           <input type="text" name="to" size="72"><br>
<b>From :</b>       <input type="text" name="from" size="72"><br>
<b>Subject :</b>   <input type="text" name="subject" size="72"><br>
<%=Attachfiles1%><br><%=Attachfiles2%><br><%=Attachfiles3%><br><br>
<b>Message:</b><br>
            <textarea rows="10" cols="50" name="message">
</textarea> <br><br>
<b>AttachedFile:</b> <input type="file" name="fieldname1" value="filename" size="50"><br><br>
<b>AttachedFile:</b> <input type="file" name="fieldname2" value="filename" size="50"><br><br>
<b>AttachedFile:</b> <input type="file" name="fieldname3" value="filename" size="50"><br><br>
            <input type="submit" name="attachfiles" value="Attachfiles">
<center>
<input type="submit" name="send" value="Send" >
</center>
</form>
</div>
</body>
</html>Create a separate MimeBodyPart object for each attachment, rather than reusing
the same one over and over. -
How to send mail with attachment
Hi,
How to send mail with word document as attachment in oracle pl/sql.
kindly help me .
thank you
regards
P Prakashcreate or replace procedure pdf_mail(
p_sender varchar2, -- sender, example: 'Me <[email protected]>'
p_recipients varchar2, -- recipients, example: 'Someone <[email protected]>'
p_subject varchar2, -- subject
p_text varchar2, -- text
p_filename varchar2, -- name of pdf file
p_blob blob -- pdf file
) is
conn utl_smtp.connection;
i number;
len number;
BEGIN
conn := demo_mail.begin_mail(
sender => p_sender,
recipients => p_recipients,
subject => p_subject,
mime_type => demo_mail.MULTIPART_MIME_TYPE);
demo_mail.begin_attachment(
conn => conn,
mime_type => 'application/pdf',
inline => TRUE,
filename => p_filename,
transfer_enc => 'base64');
-- split the Base64 encoded attachment into multiple lines
i := 1;
len := DBMS_LOB.getLength(p_blob);
WHILE (i < len) LOOP
IF(i + demo_mail.MAX_BASE64_LINE_WIDTH < len)THEN
UTL_SMTP.Write_Raw_Data (conn
, UTL_ENCODE.Base64_Encode(
DBMS_LOB.Substr(p_blob, demo_mail.MAX_BASE64_LINE_WIDTH, i)));
ELSE
UTL_SMTP.Write_Raw_Data (conn
, UTL_ENCODE.Base64_Encode(
DBMS_LOB.Substr(p_blob, (len - i)+1, i)));
END IF;
UTL_SMTP.Write_Data(conn, UTL_TCP.CRLF);
i := i + demo_mail.MAX_BASE64_LINE_WIDTH;
END LOOP;
demo_mail.end_attachment(conn => conn);
demo_mail.attach_text(
conn => conn,
data => p_text,
mime_type => 'text/html');
demo_mail.end_mail( conn => conn );
END;
ref:
http://www.plpdf.com/23-1725.html
Edited by: Mahanam on Jan 9, 2011 10:32 PM -
Sending mail with authentication
Dear All,
I am trying to send mail with authentication. My Mail server requires username and password while sending mails from Netscape.
But when I am sending mail through java mail api, I can send email with wrong username and password.
Actually when I enable debug, I am getting the following prints.
DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc]
DEBUG: SMTPTransport trying to connect to host "vkarthik.net.com", port 25
DEBUG SMTP RCVD: 220 vkarthik.net.com ESMTP Sendmail 8.12.5/8.12.5; Thu, 8 Jan 2004 21:04:59 +0530
DEBUG SMTP SENT: helo saravanakumar.net.com
DEBUG SMTP RCVD: 250 vkarthik.net.com Hello saravanakumar [192.168.4.50], pleased to meet you
DEBUG: SMTPTransport connected to host "vkarthik.net.com", port: 25
DEBUG SMTP SENT: NOOP
DEBUG SMTP RCVD: 250 2.0.0 OK
DEBUG SMTP SENT: mail from: <[email protected]>
DEBUG SMTP RCVD: 250 2.1.0 <[email protected]>... Sender ok
DEBUG SMTP SENT: rcpt to: <vkarthik>
DEBUG SMTP RCVD: 250 2.1.5 <vkarthik>... Recipient ok
Verified Addresses
vkarthik
DEBUG SMTP SENT: data
DEBUG SMTP RCVD: 354 Enter mail, end with "." on a line by itself
DEBUG SMTP SENT:
DEBUG SMTP RCVD: 250 2.0.0 i08FYxbY017757 Message accepted for delivery
I set mail.smtp.auth as true correctly.
When I browse through this forum I found that authentication is performed If we get debug prints as follows.
DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc]
DEBUG SMTP: useEhlo true, useAuth true
DEBUG: SMTPTransport trying to connect to host "smtp.mail.yahoo.com", port 25
DEBUG SMTP RCVD: 220 smtp011.mail.yahoo.com ESMTP
DEBUG: SMTPTransport connected to host "smtp.mail.yahoo.com", port: 25
DEBUG SMTP SENT: EHLO wva24-d9kzst01
DEBUG SMTP RCVD: 250-smtp011.mail.yahoo.com
250-AUTH=LOGIN PLAIN
250-PIPELINING
250 8BITMIME
DEBUG SMTP Found extension "AUTH=LOGIN", arg "PLAIN"
DEBUG SMTP Found extension "PIPELINING", arg ""
DEBUG SMTP Found extension "8BITMIME", arg ""
DEBUG SMTP: Attempt to authenticate
DEBUG SMTP use AUTH=LOGIN hack
DEBUG SMTP SENT: AUTH LOGIN
DEBUG SMTP RCVD: 334 VXNlcm5hbWU6
I guess the following statement is missing in my case.
DEBUG SMTP: useEhlo true, useAuth true
Could You please let me know why I am not getting this? Am I doing something wrong in my code?
Or it is a problem in the mail server?
Thanking you,
SaravanakumarHi Sravankumar,
Can you please let me know the Version of the JDK which you used earlier, which had those old mail.jar & activation.jar files through which you were able to send mails without SMTP authentication.
Another thing which I wanted to know from you is that were the mails reaching the destination. I want to make sure about this since,even though SMTP Authentication at the client side is disabled, if the SMTP Mail Server does not accept invalid Email IDs as userIDs, then I guess we will not be able to send mails. Please clarify on this.
My requirement is that I want to send mails without a valid User Login through that SMTP Mail Server.
If possible also please send across the piece of code which does the same
Regards,
Madhukar KR -
Send mail with attachment from webdynpro application
hi,
From a webdynpro application, the user will upload any files through the File upload ui element.These uploaded files has to go as an attachment in the mail which is being send to a particular ID ,when the user clicks the submit button in the form.
can you please give me the code regarding this and help me in sending mail with attachment from a webdynpro application.
Thanks in advance,
shami.Hai,
Properties props = System.getProperties();
props.put("mail.smtp.host", "xx.xx.x.xx");
Session session = Session.getDefaultInstance(props, null);
Message msg = new MimeMessage(session);
msg.setFrom(new InternetAddress("[email protected]"));
msg.setRecipients(Message.RecipientType.TO,
InternetAddress.parse("[email protected]", false));
msg.setSubject(subject);
msg.setText(body);
msg.setHeader("X-Mailer", " Email");
msg.setSentDate(new Date());
MimeBodyPart messageBodyPart = new MimeBodyPart();
messageBodyPart.setText("Hai , This mail Generated By the Program");
Multipart multipart = new MimeMultipart();
multipart.addBodyPart(messageBodyPart);
messageBodyPart = new MimeBodyPart();
DataSource source = new FileDataSource("C:\nag.xls");//Here you need to give the Path of uploaded File
messageBodyPart.setDataHandler( new DataHandler(source));
messageBodyPart.setFileName("nag.xls");
multipart.addBodyPart(messageBodyPart);
// Put parts in message
msg.setContent(multipart);
Transport.send(msg);
Regards,
Naga -
Send mail with attachment and more recipients
Hi to all,
I have this procedure :
PROCEDURE SPEDISCI_MAIL
Mittente IN VARCHAR2,
Destinatario IN VARCHAR2,
Oggetto IN VARCHAR2,
Messaggio IN VARCHAR2
IS
mailhost VARCHAR2(40) := 'pippo.com';
conn utl_smtp.connection;
crlf VARCHAR2( 2 ):= CHR( 13 ) || CHR( 10 );
mesg VARCHAR2( 1000 );
local_mittente VARCHAR2(2000) := mittente;
BEGIN
conn := utl_smtp.open_connection (mailhost,25);
mesg:='Date:'||TO_CHAR(SYSDATE,'dd mon yy hh24:mi:ss')||crlf||
'From:<'||mittente||'>'||crlf||
'Subject:'||Oggetto||crlf||
'To:'||destinatario||crlf||''
||crlf||messaggio;
utl_smtp.helo(conn, mailhost);
utl_smtp.mail(conn,local_mittente);
utl_smtp.rcpt(conn,destinatario);
utl_smtp.data(conn, mesg);
utl_smtp.quit(conn);
END;
Can I send mail with attachment and more recipients?
Thank you
SilviaConsider using UTL_MAIL package:
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/u_mail.htm
(Note: it's not installed and configured by default, but the scripts are supplied with the Oracle database, see documentation for instructions) -
Sending mail with multiple attachment
hi.
i want to send mail with multiple attachment.
i m succeed in sending multiple attachment but the second pdf is not open.
its given error like "This file is damaged and could not be open.
pls check my code. and
give the solution....
point should be assured...........
hope all u r understand my problem..
& tell me where is i m missing something.
REPORT YSDPASALE1_MAIL LINE-SIZE 110.
data : year_month(6) type c.
data : from_date like sy-datum,to_date like sy-datum.
INITIALIZATION.
year_month = sy-datum+0(6).
CONCATENATE year_month '01' into from_date.
to_date = sy-datum.
ranges : temp for mkpf-budat.
temp-low = from_date.
temp-high = to_date.
append temp to temp.
DATA: P_JOBCNT LIKE TBTCJOB-JOBCOUNT,
jobname like TBTCJOB-JOBNAME,
L_RELEASE(1) TYPE c.
CONSTANTS : l_c_device(4) VALUE 'LOCL'.
DATA : t type i value 0.
DATA : p_email1 like somlreci1-receiver,
p_sender LIKE somlreci1-receiver.
Data Declaration
DATA: gd_recsize TYPE i,gd_recsize1 TYPE i.
Spool IDs
TYPES: BEGIN OF t_tbtcp.
INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
wa_tbtcp TYPE t_tbtcp.
Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
gd_eventparm LIKE tbtcm-eventparm,
gd_external_program_active LIKE tbtcm-xpgactive,
gd_jobcount LIKE tbtcm-jobcount,
gd_jobname LIKE tbtcm-jobname,
gd_stepcount LIKE tbtcm-stepcount,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att1 LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att2 LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_sender_type LIKE soextreci1-adr_typ,
gd_attachment_desc TYPE so_obj_nam,
gd_attachment_desc1 TYPE so_obj_nam,
gd_attachment_name TYPE so_obj_des,
gd_mtitle LIKE sodocchgi1-obj_descr.
Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
gd_destination LIKE rlgrap-filename,
gd_bytecount LIKE tst01-dsize,
gd_buffer TYPE string.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
c_no(1) TYPE c VALUE ' ',
c_device(4) TYPE c VALUE 'LOCL'.
Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
DATA: BEGIN OF mailstr OCCURS 0,
p_email like somlreci1-receiver,
END OF mailstr.
DATA: mailtab like STANDARD TABLE OF mailstr WITH HEADER LINE.
DATA: ypp18tab like STANDARD TABLE OF mailstr WITH HEADER LINE,
ymis008tab like STANDARD TABLE OF mailstr WITH HEADER LINE,
ysd15tab like STANDARD TABLE OF mailstr WITH HEADER LINE,
ymis10tab like STANDARD TABLE OF mailstr WITH HEADER LINE.
SUBMIT YSDPASALE1 with bdt in temp
to sap-spool
with line-size = '255'
with KEEP_IN_SPOOL = 'X'
with IMMEDIATELY = ' '
WITHOUT SPOOL DYNPRO
AND RETURN
NEW-PAGE PRINT ON
DESTINATION l_c_device
IMMEDIATELY ' '
KEEP IN SPOOL 'X'
NEW LIST IDENTIFICATION 'X'
NO DIALOG.
new-page print off.
IF sy-batch EQ 'X'.
PERFORM get_job_details.
PERFORM obtain_spool_id.
PERFORM convert_spool_to_pdf.
select yemail as p_email into CORRESPONDING FIELDS OF TABLE ymis008tab
from ymail
where ytcode = 'YMIS008'.
ELSE.
SKIP.
WRITE:/ 'Program must be executed in background in-order for spool & mail sending',
'request to be created.'.
ENDIF.
wait up to 3 seconds.
submit YSD_MONTHLY_SALES
USING SELECTION-SET 'MAIL'
to sap-spool
with KEEP_IN_SPOOL = 'X'
with IMMEDIATELY = ' ' "SPACE
WITHOUT SPOOL DYNPRO
AND RETURN
NEW-PAGE PRINT ON
DESTINATION l_c_device
IMMEDIATELY ' '
KEEP IN SPOOL 'X'
NEW LIST IDENTIFICATION 'X'
NO DIALOG.
new-page print off.
IF sy-batch EQ 'X'.
gd_attachment_desc1 = 'YMIS10'.
gd_mtitle = 'Monthly Sales Report'.
PERFORM get_job_details.
PERFORM obtain_spool_id.
PERFORM convert_spool_to_pdf1.
loop at it_mess_att.
move it_mess_att1 to it_mess_att.
APPEND it_mess_att.
endloop.
APPEND LINES OF it_mess_att1 to it_mess_att.
free it_mess_att1.
it_mess_att[] = it_mess_att1[].
insert LINES OF it_mess_att1 into it_mess_att.
APPEND LINES OF it_mess_att2 to it_mess_att .
insert LINES OF it_mess_att1 into it_mess_att.
insert LINES OF it_mess_att2 into it_mess_att.
loop at ymis008tab into mailstr.
p_email1 = mailstr-p_email.
p_email1 = '[email protected]'.
PERFORM process_email.
endloop.
clear mailstr.
wait up to 5 seconds.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ELSE.
SKIP.
ENDIF.
FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> '0000000000'
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
message s004(zdd) with gd_spool_nr.
gd_spool_nr = wa_tbtcp-listident.
MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
MESSAGE s005(zdd).
ENDIF.
ENDFORM.
FORM get_job_details *
FORM get_job_details.
Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
ENDFORM.
FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att = gd_buffer.
APPEND it_mess_att.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM.
FORM convert_spool_to_pdf1.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att1 = gd_buffer.
APPEND it_mess_att1.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM.
FORM process_email *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
DESCRIBE TABLE it_mess_att1 LINES gd_recsize1.
CHECK gd_recsize > 0 or gd_recsize1 > 0.
PERFORM send_email." USING p_email1.
perform send_email using p_email2.
ENDFORM.
FORM send_email *
--> p_email *
FORM send_email." USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
Default subject matter
gd_subject = 'Subject'.
gd_attachment_desc = gd_attachment_desc1 .
gd_attachment_desc = 'YPP18 - Daily Highlights'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'Dear Sir,'.
APPEND it_mess_bod.
it_mess_bod = ' '.
APPEND it_mess_bod.
it_mess_bod = ' '.
APPEND it_mess_bod.
it_mess_bod = 'kindly find the attached document'.
APPEND it_mess_bod.
it_mess_bod = ' '.
APPEND it_mess_bod.
it_mess_bod = 'Do not reply on this mail, It is generated from SAP'.
APPEND it_mess_bod.
it_mess_bod = ' '.
APPEND it_mess_bod.
it_mess_bod = ' '.
APPEND it_mess_bod.
it_mess_bod = 'Regards,'.
APPEND it_mess_bod.
it_mess_bod = 'Arpit Shah'.
APPEND it_mess_bod.
If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_mess_bod
it_mess_att
it_mess_att1
using "p_email
gd_mtitle
'Testing mail generated from SAP'
'Daily Highlights Abstract Report - YPP18'
'PDF'
gd_attachment_name
gd_attachment_desc
p_sender
gd_sender_type
changing gd_error
gd_reciever.
ENDFORM.
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables it_message
it_attach
it_attach1
using "p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1,w_doc_data1 like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data1-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
For 2nd Attachments
* Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach1 INDEX w_cnt.
w_doc_data-doc_size = w_doc_data1-doc_size +
( w_cnt - 1 ) * 255 + STRLEN( it_attach1 ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
APPEND LINES OF it_attach1 to t_attachment.
t_attachment[] = it_attach1[].
APPEND LINES OF it_attach1 to t_attachment.
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
DESCRIBE TABLE it_mess_att LINES t_packing_list-body_num.
DESCRIBE TABLE it_attach LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = 'YMIS008'."ld_attdescription.
t_packing_list-obj_name = 'YMIS008'."ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
clear t_packing_list.
for 2 attachments
data : a type i,b type i.
a = t_packing_list-body_num.
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = a + 1. "1
DESCRIBE TABLE it_mess_att1 LINES t_packing_list-body_num.
DESCRIBE TABLE it_attach1 LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = 'YMIS10'."ld_attdescription.
t_packing_list-obj_name = 'YMIS10'."ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
a = t_packing_list-body_num.
clear t_packing_list.
* Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = a + 1.
t_packing_list-body_num = t_packing_list-body_num + 1.
DESCRIBE TABLE it_mess_att1 LINES t_packing_list-body_num.
t_packing_list-body_num = a + t_packing_list-body_num .
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = 'YMIS10'."ld_attdescription.
t_packing_list-obj_name = 'YMIS10'."ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
loop at ymis008tab into mailstr.
t_receivers-receiver = mailstr-p_email. "ld_email.
t_receivers-receiver = p_email1.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'. "X "Read Acknoledgement
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
endloop.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
Rgds.
ArpitHi Arpit,
Take a look at the documentation of FM 'SO_DOCUMENT_SEND_API1' for parameter PACKING_LIST. I think you should set t_packing_list-head_num to a different value than 0 for the second attachment.
Regards,
John. -
How to send mail with attachments - ALBPM 5.7
Hi All,
I am new to BPM,
Someone could help giving me a example of Send Mail with attachments in Aqualogic Studio 5.7?
thanks,
Renatanombrefichero="C:\\Temp\\test.doc"
subject as String="Subject"
message as String="Message"
mailAttachment = Fuego.Net.MailAttachment(source : BinaryFile.readToBinaryFrom(name : nombrefichero), fileName : "test2.doc")
mailAttachments[0] = mailAttachment
correo as Mail
correo.attachments = mailAttachments
correo.contentType = "text/html"
send correo
using from = "[email protected]",
recipient = "[email protected]",
subject = subject,
message = message -
Sending mail with attachment fails on MAC Mail and WRP400.
Sending mail with attachment fails on MAC Mail and WRP400.
We have hundreds of WRP400 connected with Mac (Machintosh) computers. No special configurations are applied (no virtual server or DMZ). Web navigation, P2P programs and sending mail without attachment work right.
The problem is the impossibility to send mails with medium or big size files attachment from MAC Mail.
If we use Windows PCs or a different linksys routers (eg. WRT54G) the problem not happens.
We have upgraded WRP400 firmware version from 1.00.06 to 2.00.05 but the result is the same. Sending mail with attachment using Mac fails.
We tried to configure WRP400 with DMZ to a particular MAC. We tried to configure Virtual server on tcp 25 port of a MAC. The result is always the same.
This is a WRP400 bug? Windows PCs work right. MAC and MAC mail works right with other linksys router.
We need help. Thanks.The problem was fixed since beta firmware 2.00.11.
I think that this issue was caused from a bug that decrease upload bitrate of WRP400 after some days of activity.
See more details on Cisco forum under title "WRP400 stops responding after browsing certain websites".
Thanks. -
Send Mail with Multiple Attachment
How to send mail with multiple attachment. The documents are in a table column BLOB. Read and attach in to mail directly.
We dont want save the documents into hard disk and attach to mail. Please Help
If you have java procedure or Pl/Sql Procedure. I think pl/sql cant. So please mail me code to [email protected] mail id. Thank you.
Thanks in advance
SelvamHi all
Thanks for your reply, already tried this methods, Its not working for my requirements. Because my attachment is can be any type like pdf,doc,txt,xls,jpg, .
And also the Utl_mail is very slow. Its using RAW type.
I can use the javamail package to solve this problem, this javamail package needs to download into server from there you can attach thus documents into mail. But I want fetch the documents and ate the same time I want attach to a mail. Like yahoo attach or msn attachment.
Thank you,
Selvam
Maybe you are looking for
-
Photo slideshow not working on Apple TV
I have two ATV - one ATV2 running 6.2.1 and one ATV3 running 7.0 and I am sharing photos from iPhoto through iTunes. When I go to "computers=>Photos" they both go to the photos screen where I can chose "Events/Photos/Face". If I chose events or Fac
-
Can I daisy chain IDE and SATA drives w/ FW400?
I have an 250GB IDE drive in ann ext enclosure with two Firewire 400 ports. Can I daisy chain a SATA drive to this or does it have to be another IDE drive?
-
Function module "select_options_restrict"
what is the functionlity of the FM select_options_restrict?
-
Multiple computers, one shared library + music
What's the easiest way to keep a library updated and shared between multiple machines on the same network? All the files are on my server. I need a library on my server (which is always on) so I can stream itunes from there to my airport express. How
-
iMovie file converted to AVI file (23G+ ), however when played via Quick Time only the first 2 minutes play (project is just under 2 hours & was prepped by FCE - 2 minutes of 2 hour project is unacceptable -- any advice?