Oracle Fusion Forms 11gR2 and WEBLOGIC 10.3.6.
Hello Everyone,
I have recently set up weblogic 10.3.6 and installed Oracle Forms 11gR2. I have everything working except one piece. TNSNAMES.ORA. When i run the logon_screen.fmx, it comes back with an error of ORA 12560. I placed the TNSNAMES.ORA in the following directory:
TNS_ADMIN = C:\Oracle\Middleware\asinst_1\config.
I read that there is a second TNSNAMES.ORA someplace, but haven't found that yet? any suggestions?
when i receive the error above through IE, i then click OK, and provide the login credentials and everything runs.
thank you,
steven
Hi PaulM,
I will try and make this clearer.
a. we didn't install Fusion Middleware Control.
b. When i modify a file, i am manually going to the file, opening it up in Notepad, make my changes, then save the file.
c. what i have noticed today after stopping the Admin Server for the ClassicDomain that contains the Oracle Forms/Reports 11gR2
1. the Formsweb.cfg has been reset to all defaults and all changes, adding 'myapp' section is gone. I see a formsweb (type CFG File), formsweb.cfg (type BAK file), formsweb.cfg (type JMXORI File).
I'm new to weblogic and oracle forms/reports 11gR2.
I had my application (just the forms) up and running yesterday after i built my own configuration in the Formsweb.cfg, but now it's gone.
lastly, where do i put the Reports *.rdf's and JSP's? are there config files to modify there as well? how do i start a Report Server to listen for the calling of the report?
Thank you very much for taking your time to help me.
sincerely,
steven
Similar Messages
-
Hello,
I am upgrading EBS 11i to 12i, Discoverer 4 to 11. After completing ebs installation and upgrade successfully, I am now working on the Oracle Fusion piece of the upgrade.
I have installed
1. JDK
2. Repository Creation Utility - RCU (schema)
3. Weblogic - WLS 10.3.6
4. Oracle Fusion - Discoverer 11g Release 1 Patchset 1 11.1.1.2.0 PFRD
5. Oracle Portal, Forms, Reports and Discoverer 11g Patchset 11.1.1.6.0 - Patchset 13517084
6. Executed config.sh and it failed with but continued.
During the Configuration of Oracle Fusion with config.sh there was failure at with "fails at creating data sources" and accidentally proceeded and all seem to go well until after shutting down the servers when Weblogic Managed Server is unable to start.
The start log indicated: "weblogic.store.PersistentStoreFatalException: [Store:280105]The persistent file store "_WLS_WLS_DISCO" cannot open file _WLS_WLS_DISCO000000.DAT." and I have been unable to find a solution for this error?
See log file error at https://dl.dropboxusercontent.com/u/15497130/oracle/ebs11/startManagedWebLogic.sh_nohup.out
If re-installation is my only option, then what are the steps to uninstall, and which components do I have to uninstall given that I had upgraded all the schemas involved?
MathiasHey,
You can always change the JDBC datasources in the Weblogic admin console . but have you recorded what is the specific error you got during the datasources creation .
I prefer...create a new user , give him sysdba privillages . Start RCU and create the DEV_DISCOVERER , DEV_DISCOVERER_PS schemas (prefix is your choice)
The Admin server will start . so go to admin console .
click services -> Data Sources
Check the data sources you have . edit each datasource and update the connection pool information .
after this you can start the Managed server WLS_DISCO
i believe this will solve this .........
if you still get issue again . you can try the link Using the WebLogic Persistent Store
Thanks
Naga -
Errors:Installing Oracle Portal, Forms, Reports and Discoverer on Win7
Someone can help me?
I installed Oracle Portal, Forms, Reports and Discoverer on Win7.
I have install:
jdk 64bit
Oracle db 11g (64bit)
Oracle Weblogic 1033 (wls1033_generic.jar)
Oracle Portal, Forms, Reports and Discoverer (ofm_pfrd_win_11.1.1.2.0_64/ofm_pfrd_win_11.1.1.3.0_64)
Configure Components Screen:I just choose the Oracle Forms/reports Oracle Forms/reports builder Enterprise Manager Oracle Web Cache .
Configure Ports Screen:Auto Port Configuration.
Specify Proxy Details Screen:No
Specify Application OID Screen:NO
But when I configure the "Configuring the Classic Instance" under the "Oracle Classic 11g-Home1". It's always pending in "Creating the domain". No any Error information.
the related log information:
Creating a new AdminServer Object ...
AdminServer port is 7001
Starting the domain ...
LOADING DLL : C:\Oracle\Middleware\as_2\install\config\\StartUtil64.dllSince your weblogic is on version 10.3.3, you can only succesfully configure your fusion middleware when you are on version 11.1.1.3.
So (1) restart the install of fusion middleware 11.1.1.2, (2) choose install type INSTALL ONLY, (3) start installation of fusion middleware 11.1.1.3 and finally (4) configure fusion middleware using AS_ORACLE_HOME\bin\config.bat -
Hi,
I am trying to install Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Linux x86-64.
I have installed weblogic 10.3.5 generic jar file.
When i try to install forms and reports server the configuration step fails while creating weblogic domain.
Please help me installing portal and reports.
Is there any patch i am missing or the weblogic version is incorrect?
Thanks.You cannot configure Fmw 11.1.1.2 against WLS 10.3.5. They are not supported nor compatible.
If you want to use WLS 10.3.5, you need to "install" 11.1.1.2, but do not configure. That is an installation option. After you have successfully installed 11.1.1.2 you will need to patch it to 11.1.1.6. After patching, you then can run the configuration (config.bat).
http://docs.oracle.com/cd/E23943_01/install.1111/e10421/install.htm#CLINS256
Version 11 is far more complex than previous versions. I strongly encourage everyone to review the product documentation before trying to install. You can also refer to the following MyOracleSupport note:
Steps to Maintain Oracle Fusion Middleware 11g Release 1 (11.1.1) (Doc ID 1073776.1) -
Install and config issues with Oracle Portal, Forms, Reports and Discoverer
For a while now I've been struggling with migrating a testing database to a newer version.
And right now I'm pretty much stuck at trying to configure Oracle Portal, Forms Reports and Discoverer
What I've got:
Windows server 2008 R2 64bit
Oracle 11g database
Java 6u27 64bit
JDK 1.6 64bit (using this after 1.7 ended up throwing out bugs while trying to start a weblogic server)
JDK 1.7 64bit
Weblogic 10.3.5 (or so i think - I've installed from the wls1035_generic.jar from the oracle website)
PFRD 11.1.1.2 with 11.1.1.3 installed over it, installed without config
and a hanging up configuration
Basically I've been trying to install PFRD (only forms, reports and enterprise manager from it actually) but it kept failing once it got to the configuration stage, so I installed without config, applied 11.1.1.3 and now trying to run the config manually with the good old \bin\config.bat
Result - the config froze for approx.18 hours then failed
There isn't much useful info I could deduct from the logs, mostly just says one or more configuration parts failed. At one place it mentions trying to set up a domain and starting up an adminserver for it - and apparently that's where it hangs up and finally times out and fails.
I'm a little clueless what to do about it as the logs don't say anything else of use I could understand. Any ideas there?Trying the step by step, the only difference between that and what i do seems to be the file copying (which I can't do - there is no windows\extra\ directory anywhere, the files mentionned seem to already be on their places and either only there, or exactly the same) and clistering
So far the news ain't good - the config process hangs on creating domain ->Step Creating Domain started
It isn't frozen per se - the process doesn't use up any processor time, memory consumption within bounds, it reacts to button clicks and all..it just doesn't do anything concerning the said domain
the last thing the .out file shows:
Creating a new AdminServer Object ...
AdminServer port is 7002
Starting the domain ...
LOADING DLL : E:\OracleDb\Middleware\develtools\install\config\\StartUtil64.dlland in the log:
[2011-09-08T11:57:03.456+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 14] [ecid: 0000J98U0KsFS8XLxuDCiW1EQ92r000005,0] Setting >valueOf(DOMAIN_PORT) to:7002. Value obtained from:USERit's the same it did last time, when after 18hours it woke up with .out saying:
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3173)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3033)
at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1644)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:634)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:390)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3143)
... 18 more
oracle.as.provisioning.exception.ASProvisioningException
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:685)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:390)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
... 13 more
progress in calculate progress4
progress in calculate progress4
oracle.as.provisioning.exception.ASProvisioningException
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:685)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:390)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
... 13 more
Going to execute executeAfterConfig
java.lang.IllegalStateException: Action:Application Configuration failed with error:Configure Classic Failed.
at oracle.as.install.engine.modules.configuration.client.ConfigAction.fail(ConfigAction.java:227)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:129)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
In Config Module Finish Event...and the log continuing with some variable setting notifications and this:
[2011-09-08T08:27:45.272+02:00] [as] [ERROR] [] [oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager] [tid: 14] [ecid: >0000J93lRQOFS8XLxuDCiW1EPpn_000005,0] One or More configurations failed. Exitingthen again more traces and notifications until the end marking config as failed
I'm kinda paranoid about the double backslash in the dll path, but other than that no clue as to why the domain doesn't set up
the other link you mentionned seems to have no relevance yet
does that clear up anything for you though?
..can the lack of SOA suite have anything to do with the problem? -
Dear All Precious Friends,
I am having problem while installing Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit,
I have already installed Oracle Database 11g Release 2 -------
----Then i configured JAVA Access bridge
--------then installed and configured Required Schema using Repository Creation Utility of same version of Database 11g,
-----------then installed Oracle Business Intelligence 11g version 11.1.1.6.0 which includes Web logic..............I am feeling that i did right at this point...........
..............also feeling comfortable after install Oracle Identity and Access Management 11g ..................
-----------------but don't know how to configure OID to install Oracle Portal Forms Reports and Discoverer 11g...............
Please help my Oracle Friends
Your early help will be highly appreciated.
thanks and regards
HassanYou said, "...+I would like to install Release 2(11.1.1.2.0)+ ...". Be careful. 11.1.1.2.0 is not Release 2. The version for Rel 2 is 11.1.2.0, notice that there is one less "1". Also, there is no way to patch from Release 1 to Release 2.
In EDelivery, this is what you should find if you search on "Oracle Fusion Middleware" for "Microsoft Windows x64 (64-bit)":
First look for this link then drill into it:
Oracle Fusion Middleware 11g Media Pack for Microsoft Windows x64 (64-bit)
In this section you will find the following:
This is the full product installation of FMw 11 Release 2 (Forms & Reports)
Oracle Forms and Reports 11g R2 (11.1.2.0.0) for Microsoft Windows x64 (64-bit) V28761-01
This is the full product installation of FMw 11 Release 1 (includes Portal, Forms, Reports, and Disco)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 1 of 4) V18785-01
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 2 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 3 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 4 of 4)
This is the FMw 11 Release 1 patch set that will bring the above 11.1.1.2.0 installation to 11.1.1.6. This is NOT a full product installation - just a patch
Oracle Portal, Forms, Reports and Discoverer 11g Patch Set 5 (11.1.1.6.0) for Microsoft Windows x86 (64-bit) V29850-01
There are no patch sets for Release 2 as of yet. -
Oracle Portal,Forms,Reports and Discoverer 11G
Good evening
I installed the following products
* Oracle Database(to the 1st computer)
* Repository Creation Utility
* WebLogic Server(to the 2nd computer)
* Oracle Portal,Forms,Reports and Discoverer 11G(to the 2nd computer) – during installation I chose forms and reports
Identity Management and SSO are not installed, why they are used for?
While connecting to the base with the help of Visard I open Oracle Forms Builder by and create a primitive form. Everything is good. All are shown. I press Run Form which is written as Oracle Forms in browser and suggests keeping a clear file. Particularly in applied file!
Print screen of my monitor yo can see: http://www.sql.ru/forum/actualthread.aspx?tid=678852
Thanks for attention.Identity Management and SSO are not installed, why they are used for?IDM and SSO is used for user authentication.
You can search for details about that.
>
While connecting to the base with the help of Visard I open Oracle Forms Builder by and create a primitive form. Everything is good. All are shown. I press Run Form which is written as Oracle Forms in browser and suggests keeping a clear file. Particularly in applied file!
Print screen of my monitor yo can see: http://www.sql.ru/forum/actualthread.aspx?tid=678852
Thanks for attention.the port which you have mentioned is it WLS_FORMS_PORT or any other.
Try running default Forms port WLS_FORMS_PORT that will be 9001
or check for the WLS_FORMS_PORT in the portlist.ini file.
Also are you getting any exception in the Java console.? -
Oracle Virtual Private Database and Weblogic.
Hi All,
I am using Oracle 11gR2 and weblogic 10.3.5.
I would like to use Virtual Private Database feature in my project. I read the documentation and I understood the concept. I made a few tests on my dev environment and it seems to work fine.
Now, I would like to use VPD with weblogic (we are also using Hibernate) as all my users connect to the database through weblogic.
My question is how can get the name of my non-database users (so coming from weblogic) and automatically set them to my context ?
Many thanks for your help.Anyone on this one ?
Many thanks ! -
Step by step installation of Oracle Portal, Forms, Reports and Discoverer
Hi all
i m using Oracle Enterprise Linux 5. can any one plz tell me step by step installation of Oracle Portal, Forms, Reports and Discoverer?
i watched some tutorials but didnt find any thing. did i need any pre-installation for Oracle Portal, Forms, Reports and Discoverer on Linux?
Regards
SaqibDear Saqib Alam ,
Hope you are fine, and also you have completed the PORTAL installation successfully.
Can you kindly share me the methods you have went..
can you clearly explain us by this OTN, it will be a great Knowledge Sharing for Apps DBA like us.
1) what are the softwares we have to download for the Portal 11g
2) if possible Step by step installation method.
Thanks in advance,
Abdul Hameed -
Oracle Application Express (APEX) and WebLogic Security
Hi,
Has anyone tried integrating Oracle APEX (custom authentication) with WebLogic Security as the user store?
Thanks
JoelHi
Depending on your architecture - APEX in EBS database - or APEX in it's own database instance you're going to have to change a couple of things.
Most importantly - EBS R12 has removed MOd-PLSQL from the Apps menus and from the HTTP listener.
You will need another HTTP listener - Apache with mod-plsql or Database R11 with Embedded Plsql Gateway - EPG.
Second the way that APEX is called from EBS using the Web PLSQL functions in EBS menus is no longer supported in R12.
Check out https://sites.google.com/a/popay.be/apex-on-apps/apps - follow the contacts there - they have also developed a Java utility to call APEX from EBS R12.
In short - depsite Oracle's 'statement of direction' to move away from mod-plsql and removing this from EBS R12 (just what motivates this wierd thinking???)- APEX is still the most flexible and cost-effective means to extend EBS functionality - especially in reporting - and it works just fine in R12.
Good luck
Mike -
Required Trigger To be Oracle Application Forms Customization and its order
Hi All,
I am new to oracle application forms customization.
Can you please answer following?
What are the triggers required to be overrided for forms customization in oracle appliocation?
What is the order of trigger event occurrs when forms comes up in Oracle application?
Thanks
PrashantHi Prashant,
There are a number of triggers in Oracle forms. They are basically 4 types
1. Form level
2. Block Level
3. Record Level
4. Item Level
Again there are subclassifications.
The firing sequence depends on your action. If you make a change in an item and save the item level triggers fire for the item you changed. Then the record level triggers fire. However if you are click in an item(you are technically navigating to the item) the record level(when new record instance-WNRI) fires and then the item level trigger(when-new-item-instance WNII) fires.
So it depends on the situation. Look in the forms tool help sections. The have some good discussions there.
Now to 'override' triggers. I am assuming you plan to extend oracle standard forms. The best way to do this is use the CUSTOM.pll. Oracle forms call this .pll in various triggers such as WNRI, WNII etc. You can add your logic here and it will take effect and will be upgrade safe. Nowadays they have forms personalization. Take a look at this also to determine the best way.
You may want to read the Application developers guide from metalink and they have a good discussion there on forms customization. It also talks about the CUSTOM.pll
The scope of forms is huge and you would be better of taking a
1. Forms course
2. quick look through the forms section of the developer's guide and understand the concepts
3. Honing on the customizations you want to do and start working on that specific component.
4. Look in Metalink which has a lot of info on forms and forms forums.
This is actually a Framework forum which deals with Web applications :-)
Thanks
Sandeep -
Problem in Distributed transaction with Oracle 8.1.7 and Weblogic 7.0
Hi,
I am using two unmanaged weblogic 7.0 servers and oracle 8.1.7 enterprise edition.
I am using oracle.jdbc.xa.client.OracleXADataSource for creating connection pool
in weblogic. The pool gets created fine but when connection it is getting used
it throws up following error.
java.sql.SQLException: ORA-02044: transaction manager login denied: transaction
in progress
ORA-06512: at "SYS.JAVA_XA", line 0
ORA-06512: at line 1
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:168)
at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:208)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:543)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1405)
at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:822)
at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:1446)
at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:1371)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1900)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:363)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:407)
at oracle.jdbc.xa.client.OracleXAResource.start(OracleXAResource.java:171)
at weblogic.jdbc.jta.VendorXAResource.start(VendorXAResource.java:41)
at weblogic.jdbc.jta.DataSource.start(DataSource.java:569)
I don't know what is causing this problem.Please send me the pointers.
Regards,
Vikash
ID is a NUMBER and id.toString() is not a number, for
example it ca be a null reference.
well we tryed also this version :
ps.setLong(1, id.longValue());
moreover the exception wasn't thrown for the value of id :56 but was thrown for the value of id : 88. Hence I think it is a case of something other than my code.
michal -
Need practice material for Oracle Apps forms, reports and workflow
Hi,
I want to design new form using Forms Developer 6i/Template.fmb, report using reports developer 9i and new Workflow using WF builder by changing the subscription of the currently defined event in Oracle or totally creating new event and its subscriptions. I want to do all the above from scratch and upto Oracle Apps standards. I have vision instance here.
Can I get practicing/training material any where in web to download like tutorial or practice lessons. I heard Oracle training centres material is very good for learning. Can I get it or any other material for the above practice.
Please let me know.
Thank youI heard Oracle training centres material is very good for learning. Can I get it You can get this material by attending a class in OU. Sharing this material in prohibited for obvious reasons.
or any other material for the above practice.In addition to the link posted by Sami, you may refer to:
Oracle Apps 11i
http://www.exforsys.com/tutorials/oracle-apps/ -
How to deply with Oracle 8i, Forms 6i and Reports 6i
We are developing a number of application systems. We have 2 servers. Oracle 8i is installed on one server and other werver is used for network authentication.
We have to now start deploying newly developed applications. We have around 200 users located in various buildings over our campus spread over one kilometer.
What can be different deployment strategies.
Pl. help.
M. TariqMr. Robin
I also need information on the subject. Kindly send me a copy of the presentation when it is ready. Here is my email address: [email protected] Your act will highly be appreciated.
Thanks
Farhan
Muhammad,
A whitepaper on this topic will be produced over the coming months, but isn't available yet.
There will be a presentation on this topic at ODTUG in Las Vegas in June, if you happen to be going. :)
If not, I can send you a copy of the presentation once it is done. You'll need to reply and give your email address.
Regards,
Robin Zimmermann
Forms Product Management -
How to deploy with Oracle 8i, Forms 6i and Reports 6i
We are developing a number of application systems. We have 2 servers. Oracle 8i is installed on one server and other werver is used for network authentication.
We have to now start deploying newly developed applications. We have around 200 users located in various buildings over our campus spread over one kilometer.
What can be different deployment strategies.
Pl. help.
M. TariqMr. Robin
I also need information on the subject. Kindly send me a copy of the presentation when it is ready. Here is my email address: [email protected] Your act will highly be appreciated.
Thanks
Farhan
Muhammad,
A whitepaper on this topic will be produced over the coming months, but isn't available yet.
There will be a presentation on this topic at ODTUG in Las Vegas in June, if you happen to be going. :)
If not, I can send you a copy of the presentation once it is done. You'll need to reply and give your email address.
Regards,
Robin Zimmermann
Forms Product Management
Maybe you are looking for
-
How can I get Apple to send my iTunes security question answers to my new email?
Originally, I had my Apple account set up to a gmail account. But then, I deleted my gmail and connected my account to my hotmail instead. I'm going to lose this laptop soon for a new laptop swapout, and this is the only device that lets me use my iT
-
Two users on the same Mac - jointly manage iTunes library
Well, Myself and my wife share the same Mac at home. I would like to have the same music library on both accounts that either of us can administor. I know I can just turn on file sharing but that can be slow to load if there is a large library, it me
-
Flash Player update for Mac OS X 10.5.8
Does anyone have any ideas how to update my flash player on my Mac? It has the following: OS X 10.5.8 which has a 2.4 GHz Intel Core 2 Duo Processor. I tried updating directly from the Adobe forum related to this, but it only lists the option from
-
Is it possible to have a combo box change an image on a form? How do you do it?
I would like to have an area in one of my PDF forms where a combo box with 8 items changes an image near the combo box. 8 items 8 images. if you select item 3 in the list then image 3 is displayed in the image area or field. Is this possible? Mig
-
ITunes cannot properly detect iPod even after uninstall and re-install
Recently I tried to sync my iPod nano (NOT touch) to my windows computer, but even after i completely uninstalled and reinstalled it says that it cannot properly detect it. I am running the most recent version of iTunes on Windows Technical Preview.