Oracle Fussion Report Builder Not properly Work in 64 bit windows?

Windows 7 64 bit Oracle Report Builder 11.1.1.3 not properly work
Windows 2008 server 64 bit Oracle Report Builder 11.1.1.3 not properly work
Data model Design Open (APPCRASH) vgs.dll
copy paste not properly work
windows donot send message many times
very very slow working in design time
goto end (delete in both operating system)
but ii think report builder work only 32 bit windows????
any body can help me what can i do for 64bit windows

Reports Builder 11g doesn't work on 64-bit OS-system (linux also). You can only use an VM-maschine with 32-bit OS or wait until oracle fineshed the Builder for 64-bit.

Similar Messages

I have firefox but cannot get into it for last 2 weeks. It says free download manager is not properly working

I already have firefox but for the last 2 weeks I have not been able to get into it.
I get an errorsaying free download manager is not properly working please reinstall free download manager but i cant do anything.
I have tried to uninstall firefox so I could reinstall it but it wont let me uninstall it either.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

In my ipad 2 not properly working main menu of bottom in ipad

in my ipad 2 not properly working main menu of bottom in ipad. 2-3 time push the buttan then sometime its working.

I'm not exactly sure what you mean by "main menu of bottom in iPad."
Perhaps you could explain it better?

Download evaluation version of oracle 10g report builder

Hi
can anyone tell me how to download evaluation version of oracle 10g report builder for free.

Hello,
You can download Developer Suite here :
http://www.oracle.com/technology/software/products/ids/index.html
Regards

I'm using iphone 5 but its camera is not properly working. all the images i'm clicking are of dimension 600X800 and the size of the image is just 60-70 kb. now please tell me how to increase the dimension of images and its size.

i'm using iphone 5 but its camera is not properly working. all the images i'm clicking are of dimension 600X800 and the size of the image is just 60-70 kb. now please tell me how to increase the dimension of images and its size.

''rojere [[#question-1055991|said]]''
<blockquote>
i try to keep my thumb palms off the mouse pad when i am typing but every now and then my screen resizes larger or smaller until i take my left palm off the keyboard base its only when my left palm is resting on the base next to the touch pad. i type pretty fast so it gets annoying and yes it also jumps screens or reverts back to previous message and i have to choose ctrl z to undo and get back to my message i was typing... it also switches tabs on me as well... not sure why my palm being on the left of the keypad on the base should effect anything but it does after a while. and i have to stop what i am doing...and go to the firefox menu and change the screen size back down to 100% sometimes it goes up to 200-300 other times it goes down to 70-80% i find it annoying i i wish there was a way to turn off the screen resize in the setup panel. if its just left to be 100% i am happy with that... i don't need it to be bigger or smaller... there should be a way to LOCK it down... i understand that there are people out there with eye problems and needs to have the screen size increase using the + or - but there should be a lock so it just stays no matter what is happening on my keypad or touch pad or base of the pad... that screen size will not increase or decrease. unless i turn off the lock... perhaps this is something they can implement in the next version or do a quick update of the browser
</blockquote>
sorry that is all greek to me thanks for attempting to explain what you were trying to explain sorry i just not tech person to be able to understand or where to begin ... have good day and thanks for again trying

Will Photoshop Elements 10 work on 64-bit Windows XP?

I am currently running 64-bit Windows XP on my desktop PC and am interested in upgrading to the latest version of Photoshop Elements. I see in the system requirements for version 10 that it supports Windows XP Service Pack 3. Since Microsoft never released a 64-bit build of Windows XP Service Pack 3 (the last service pack available for 64-bit Windows XP being Service Pack 2), will Photoshop Elements 10 even install, let alone work, on 64-bit Windows XP?
Please DO NOT suggest that I upgrade my PC to a later version of Windows. I already have Windows 7 on my laptop, but I want to use Photoshop on my desktop PC.

Matthew25187 it should work ok on Windows XP 64-bit. The main issues for 64-bit are around drivers as long as your display driver has been functioning fine you should be ok.

Oracle Apps - Reports 6i not working

Hi,
I have a Oracle Apps - 6i Report works fine with one instance and the same report does not fetch any records in the other instance..
Even its not printing the messages in the before report trigger, when i query from the backed it fetches records. This is really strange..
Please any one help me on this.
Thanks,
Genoo

I have a Oracle Apps - 6i Report works fine with one instance and the same report does not fetch any records in the other instance..What does the concurrent request log file say?
Even its not printing the messages in the before report trigger, when i query from the backed it fetches records. This is really strange.. Please open the form using Reports Builder, compile it (make sure it returns no error), and upload it again to the same instance.
Thanks,
Hussein

Report builder not printing

HI all,
we were using Oracle Report 6i on windows XP Service pack 2, Oracle Database 10.1.0.2.0 On AIX 5.2 and SEDCO Magina L2200c printer was being used to print the reports from report Builder 6i and it was working fine. but now just we change the our user PC instead of service pack2 we are using service pack 3 and insatllesd oracle report builder 6i on it .but its not printing properly (it skip some character). i check the NLS_LANG=ARABIC_UNITED ARAB EMIRATES.AR8MSWIN1256 ,it is same as previous, we using arabic language. if any body has idea please do suggest me what should be taken. i am waiting for your response.
BEST REGARDS
------------------

Report 6i That is not very specific. Are you on the latest patch (patch set 17 I believe)?
It could also be a problem with the printer. Check for driver updates for this specific printer.

Use css file in oracle 10g report builder

hi every one
i am using oracle 10g report buidler. i want control paramform by usign css file.
any body have idea how can i use css file in oracle report builder 10g and how can i modify it's path and i how can i manage any css class on a perticular field.

Thanks Billy.
Yes you are right.
Here why I discarded that option is,
I may get the source files with changing layouts.
My Actual scenario is as follows.
Initially we developped all the things using PL/SQL packages. Its working fine.
But as per the inputs we received from requirements group, the file structure changes dynamically. and we would able to consider those new columns also. We should be able to changes the rules dynamically.
Lets say, we doing fullouter join on Src_A and Src_B. on columns col1_A and col1_B.
Now the requirement changes in a way that, the join should be done on Src_A and Src_C. on columns col1_A and col_C.
For this I need to define a new package.
Instead of that, I would like to do everything dynamically based on configuration parameters given as input.
Thank you,
Regards,
Gowtham Sen

Published report will not run; works fine in VS2010 debug mode.

Have 64bit Visual Studio Ultimate installed, CRv13_1 and MSSQL 2008 R2.
The issue I am having is the report work like a champ when I run the web application in debug mode. IE I hit the run button in Visual Studio, However when I publish the application the report will not run. I get various errors depending on how I have connected to report to MSSQL. I have tried ODBC and OLE DB connections. I have tried Windows authentication and MSSQL user login. The results are the same. the report works fine in debug mode but will not work when published. The most common error message is :
Error
Database logon failed.
or
Login failed for user 'NT AUTHORITY\NETWORK SERVICE'
Depending on how I am authenticating. I have Google this issue and there are tons of posts about it but no solutions. Any help would be appreciated.

See if the article [Troubleshooting Guide to Database Connectivity Issues with Crystal Reports in Visual Studio .NET Applications|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0225775-88c4-2c10-bd80-8298769293de] helps.
I'd settle on the prefered connection method and troubleshoot that. Use the search box in the top right corner of this web page. It will bring up KBases, blogs, wikis, articles and more. Also, search these forums. There is lots of info here and lots of answers.
- Ludek

Oracle Clinical Reports - Ouput not generated

Hi,
When i try to run reports within Oracle Clinical it runs as "Success" as per Batch Jobs window.
I have run it using destype=FILE and desname=<reports_output_path>
The "View Log" also opens the log, but when trying to "View Output" it gives the following message in the explorer window:
File <reports_output_path>\o489.pdf does not exist
When i view the Report details in Report Queue Manager it shows the following error:
Terminated with Error :
Caught exception: exception oracle.reports.RWException { oracle.reports.RWError[] errorChain={struct oracle.reports.RWError { int errorCode=56093, java.lang.String errorString="Cached output for job 23 is no longer valid", java.lang.String moduleName="REP" }} }
The Report is being generated sometimes as a PDF file in the "Cache" directory of reports server, but the output directory doesnt contain any pdf file.
Any ideas folks?
Best regards,

Hi,
Thank you for the response.
1. This happens with all output types...I guess PDF Plugin is installed as it is generating a PDF in the Reports Cache Directory that is D:\oracle\9iDS\reports\cache
2. RXCPROD has been NOT been given Local Administrator rights. But it is a member of "Power users" group.
Does running a report in any way depend on the RXCPROD account...i thought it was just for running PSUB?
Any further ideas?
Best regards

Waking iMac often reports devices not properly shut down.

Intel 27" iMac. Often when my wife's computer wakes after sleeping, all the attached devices report they were not properly ejected. Except that they were never ejected. For some reason, going to sleep causes the devices to think the computer is shut down? Devices include hard drives, Kindle. Haven't seen this with the iPhone. I'm going to see if changing the computer sleep settings to see if that makes any difference. Any other ideas?
Thanks,
David G.

Marking as answered as I managed to resolve the issue

Adobe Flash v11.3.370.178 not properly working in Server 2012 RP?

Has anyone gotten the bundled Flash to work in Server 2012? Even if I completely disable all security within IE x86/x64/RT, the best I see is a blank interface for Flash that is the correct
size of what I'm trying to load, but no content displays and no flash interfaces show up. Right clicking does bring up the Flash context menu. If from there I go to About Adobe Flash Player, the version info will only show up on Adobe's site right
as I close the tab, and it’s much larger than it should be for the half a second it shows up.
This is broken in the released VHD and ISO so far as I can tell.

I always control the majority of IE settings via Group Policy and normally set the zone to medium-high. I
never launch or elevate any browser with a user who’s a member of the Administrators group unless diagnosing an issue, and even then I normally do it within a snapshot. I don't even
run browsers as my normal limited user, I always de-elevate them to a different user who can't masquerade as my normal authentication.
I've had Flash x64 working in 2008 R2 since October, and x86 since 2003 Server. Never had a real problem with it on an RTM version of Windows, but heh, betas!
I'm not sure what you mean by Windows controlling Internet Security. There are some settings that other browsers will respect from Internet Settings, but not many, and the firewall works
as a firewall should, can you clarify?
Devin Lanei
If security, privacy or contents settings in "Control Panel\All Control Panel Items\Internet Options" are more restrictive than the Firewall, the Internet Options will govern. Specifically, when it comes to scripts, executables or anything
else from the internet that Windows thinks could change the system when it is opened, Windows will not let it be opened. I don't really know this for a fact, it is just my opinion, but I've seen enough indications. And UAC just makes it worse.
You are right that this is best done with Group Policy, especially on production systems. The only reason you would do what I described is that it is an isolated test system and you are trying to get clues as to what policies you could try
setting to get it working the way you want (on the test system, of course).
I have my USB flash setup the way I want it and I will test it tomorrow. It seems I never do anything the easy way, I had to make it elaborate. I have set up so that it should be able to boot both efi and mbr, and will offer a menu of four OS setup
entries and a Recovery Console entry. I've got Windows7, Windows 8, Server 2008R2, and Server 2012, all x64. I've been using bcdedit for most of the last five or six hours.

Easy Print VI panel not working with 64-bit windows vista

We have a significantly sized application developed in Labview 8.2.1 that is designed to work on a standalone computer. This application uses "Easy Print VI Panel" to print report pages which are basically front panels of various VIs. The application also prints some report pages using the "Print Report" module. Typically we use the application builder and use the generated installer to install the application on a target computer. We also include the appropriate Run-Time engine and NI VISA 4.1. The applications works exactly as designed on all versions of 32-bit Windows (ME, XP, Vista). Now, when this application was installed on a machine running Windows Vista 64-bit, attempts to print reports resulted in a lot of blank pages. I noticed that the report pages that are based on the "Easy Print VI Panel" module were blank whereas the ones that are based on the "Print Report" module were not blank.
To further troubleshoot, I created a very small application. The only function of this application is to use the "Easy Print VI Panel" to print the front panel of another VI that I bundled inside the application. I observed the same behavior.
From what I can tell, either:
1. "Easy Print VI Panel" with Labview 8.2.1 is not compatible with Windows Vista 64-bit
2. The Labview Run-Time Engine 8.2.1 has some incompatibility with Windows Vista 64-bit (I have not tried to install the full development system on the 64-bit Vista computer)
Any insights as to what may be causing this? or does anyone know of a fix for this issue. I am attaching the latter simple test code to the post.
Thanks
Attachments:
test_print.vi ‏18 KB

Sorry Sam, I couldn't get my hands on a 64-bit Vista machine to tinker with your VI. I got a little obsessed with trying to get ahold of a computer to test it out on, that I overlooked actually taking the time to think about the problem. But, now that I'm thinking about it, which operating system did you build this application on? Sometimes an application that was built in another OS than it's running on will have problems caused by the differences in the OS. I'd like to try building the application in 64-bit Vista and deploying it to another 64-bit Vista machine, but unfortunately, I can't test this out myself. My gut feeling is that the application is acting up because it wasn't built in 64-bit Vista, not because the Easy Print VI or the 8.2.1 Run-Time Engine themselves are incompatible with 64-bit Vista. If you can, please test out that theory. That will definitely help determine if it's truly a bug or not.
Product Support Engineer
National Instruments

Get Crystal Report XI R2 to work on 64 bit OS (win 2K3) web ActiveX viewer

Can anyone help me with the issue below, I have been working on this issue for long time and have intensively researched the internet and tried out few solutions but non worked for me.

Overview: 
I am working on an application that was build with a classic ASP and VB6 COMs. The COMs load rpt file, this would be the report template, then it loads a recordset into the rpt file and gets displayed on the web page using ActiveX viewer. There are few activities done by the COMs, varying from changing formulas, updating header and footer, suppressing sections to loading data. We are using crystal report XI release 2 with SP4 and application works fully ok on Windows XP and Windows 2003 on the 32 bit OS. Now we are trying to deploy the application on a 64 bit environment and we realise that we can only do this on 64 bit in a 32 bit mode. As we have VB COMs and they can only work on a 32 bit system. So I have done the following in order to enable our application to work and for the reports to run.

1) Configure the IIS server to run in worker process isolation mode 
2) Enabling the 32bit mode by running this command 
cscript.exe adsutil.vbs set W3SVC/AppPools/Enable32BitAppOnWin64 TRUE 
3) Install our COM application and give the required permission 
4) Install ASP files with rpt files and give the required permission 
With few attempts I managed to run our application on the 64 bit system using the 32 bit mode, but few reports still fails to display.

Problem: 
I am unable to run and/or view crystal reports on a windows 2003 64 bit system. I have turned on the 32 bit mode so I am able to run COM objects and I am able to run my application and view crystal reports but some reports still fails with no error message. The failed reports display the crystal viewer with no data no page but only the top bar with crystal controls e.g. export, move pages etc.

Analysis/investigation: 
I run the same application pointing to the same database as my 64 bit (32 bit mode) environment and run the reports with some data and it worked fine, so I saved the report and tried viewing on my 64 bit environment with simple crystal preview page. Unfortunately it was same result as report came back blank in the viewer with no pages even though if I open that report the crystal application it will show me data saved with it. I have to say on my windows 2003 32 bit system that was fully working, I needed to turn on isolation mode in IIS 6 (i.e. turn off worker processor mode) in order to get all my reports working, otherwise I would get the exact same issue that I have with the 64 bit system. However in my 64 bit system I canu2019t turn on isolation mode, as the 32 bit mode option requires the IIS to be set with worker processor mode or none of the COMs will work.

So please could you help with any suggestion, or solution if possible.

Many Thanks

Hi Ludek

Let me clarify a bit about the issue we been have: 
For example we have report-1.rpt and report-2.rpt, both are very similar and in fact report-2 have a little bit more information than report-1. So when I install our application on a webserver in Windows 2003 32 bit system, with Crystal Report XI R2 developer edition + SP4, both reports work perfectly fine and application save the report and show it on the crystal report ActivesX viewer. So I made copy of report-1.rpt and report2.rpt with data and kept it a side.

Now I install our application that is the asp files and COM objects on a 64 bit windows 2003 and turned on the 32 bit mode to enable our COMs to work. I then run our application pointing it to the same database I used with the other OS, and I tried to run report-1.rpt and report-2.rpt, so report-1.rpt has failed with the viewer showing but no pages and only the controls. However, the report-2.rpt worked fine with data showing ok. So I copied the 2 reports I generated from the other OS and pointed my view report asp page to these rpt files, again same result report-1.rpt failed and report-2.rpt worked ok.

So I guess what I am trying to say is we are using the exact same COMs on both OS and to generate on both reports, also pointing to the same database using the same connection string. The result is one report is failing on the 64 bit machine.

Now when I try to export/save the report-1.rpt, the report that come with no pages, I get the error below, this is the same error I get if I try to move to different pages.
 CRAXDRT Error Occured on Server.70 : Permission denied

Please let me know if I can provide more information.

Many thanks

Oracle Fussion Report Builder Not properly Work in 64 bit windows?

Similar Messages

Maybe you are looking for