Oracle Graphics problem

When I run a graphics report in preview mode, the pie chart color slices are correct. When I run the same graphic report to a pdf file, the pie chart colors are not correct.
I opened a TAR and they referred me to a bug# that dosen't exist.
Please help. Jim 202-616-4510.

believe me, oracle graphics is not good to right tool to create a grpah. I had many problems using the tools. Oracle Graphics is really primitive and needs a lot of improvment. every time i have a problem with the tool, i contact Oracle support and they come back with the bug soultion. Any way, a new version of graphics should be out with the next few months, hope it is better than what we have

Similar Messages

Oracle Graphics Problem on 3 tier

Hi!,
We have a web based ERP system. I have developed a system which calls oracle graphics from forms 6i. I am facing following problems:
1) When I am using RUN_PRODUCT to call graphics it does not show anything
(not giving any error also) & when I am using OG.OPEN to call graphics it show
the charts but with same color of all pie slies and bars on 3 tier.
2) I have used "User Area" in a map to to call reports on mouse click. There is no effect of mouse click on 3 tier.
However, both works fine on 2 tier.
Can anyone help me to solve the problem?
Thanks & Ragards
Mayank Vaishnav

The following source is for Forms 9i but also contains hints and tips that are true for Forms and Graphics 6i. Ignore the installation and configuration section because it is Forms 9i related only.
http://www.oracle.com/technology/products/forms/pdf/ogonweb44.pdf
Frank

Changing legend labels in Oracle Graphics 6

Hello,
i am currently using Oracle Graphics to create barcharts for my reports. My problem is, that i want to change the label used for the shown bars via a parameter. Changing the labels of the X- and Y- axis is no problem with PL/SQL but it seems that the only way to change the legend labels is by using "AS" in the query (e.g. select a_column as LABEL from ...). I really need to change it by parameter.
thx for any help.

Post Author: jsanzone
CA Forum: Publishing
Nym,
The only way that I've been able to control the name of a label in regards to graphing is to use the Variable Editor and create a variable off of the column, for instance:
The name of the column from the database is call "Black_Catalog". so I create a variable called "The Black Catalog" and in the formula: =[Black_Catalog]
Then in the graph I replace the field that is called =[Black_Catalog] with my new field. When the legen displays it will show "The Black Catalog".

YOSEMITE SLOW, GRAPHIC PROBLEM & MORE..

I have problem with everything in my mac. Safari is slow and lags. I need to w8 much time to open my apps like; iTunes, Steam, App store, finder and more. I have graphic problems, fps prob, yosemite need a lot of CPU and memory. Someone has the same problem? Need 7-10 min to turn on my mac. Will be resolved with an update? Sorry for my bad english, I'm italian.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.FolderActions.folders com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper ' ' 879294308 461455494 3627668074 1083382502 1274181950 1855907737 464843899 3694147963 1417519526 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 3301885676 891055588 998894468 695903914 1443423563 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e sysctl\ -n pluginkit );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|Roame|SMC:|suhel| VALI|ver-r|xpma' -o -o -k Sender fseventsd -k Message Req SL -o -k Sender Req launchd -k Message Req de: " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 38 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 39 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Calling 6i reports containg oracle graphics in ias 10.1.2.0.2

Hi,
i'm having troubles calling a report containing an oracle graphics chart.
i'm using ias 10.1.2.0.2 and the corresponding forms tools. and the ias 1.0.2.2.2a isuite server.
Compiling and running the forms is not a problem and neither is caling ordinary reports. i.e reports not containing any oracle graphics. So i'm confident that my server setup is correct.
When i'm calling reports containing oracle graphics charts the reports simply hangs.
Consulting the ias server reports queue i can see that status is 'running the report, now executing pre-form trigger' and that's it. status never changes and the report never finishes.
In my ias 101202 home i've set the following environment variables:
ORACLE_GRAPHICS6I_HOME -> E:\oracle\806 which is where my oracle graphics is installed
GRAPHICS60_PATH -> e:\mastra\rep which is where i store my reports and oracle graphics charts
I keep both the .rdf file and the compiled .rep in the e:\mastra\rep directory.
Strange thing is that if i don't include the full path to the oracle graphics component in the report it's not able to find it at runtime. I can see in the reports status screen it complains about not being able to fond the chart.
what parameter should i set so i don't have to hard code the path to the graphics chart?
If i include the full path to the chart it probably finds it because it doesn't complain but now it hangs telling me that it's running the preform trigger. and then nothing happens.
please help me cause im stuck here.
thanks for any input.
br
kim gabrielsen

Hi Frank,
Our reports are all called from Forms...using RUN_REPORT_OBJECT in the 10g environment. We have hundreds of reports (6i based) that all work fine when run on the 10g app server. The only ones that fail to complete are those that have Graphics embedded. Yet they work just fine when run Client/Server under 6i. On the 10g app server they just run forever/get hung.
If I launch Graphic 6i Builder on the 10g App Server box, I can connect to the database without any problems. And Graphics 6i do run just fine from my 10g forms (converted from 6i Forms) on the App Server. NOTE: My Graphics 6i uses the same tnsmanes.ora and sqlnet.ora that my App Server uses (via a TNS_ADMIN setting in the Windows registry)
Is there something extra special I need to do in the report itself?
Thanks,
John

Calling 6i reports containg oracle graphics in ias 10.1.2.0.2 from forms

Hi,
i'm having troubles calling a report containing an oracle graphics chart.
i'm using ias 10.1.2.0.2 and the corresponding forms tools. and the ias 1.0.2.2.2a isuite server.
Compiling and running the forms is not a problem and neither is caling ordinary reports. i.e reports not containing any oracle graphics. So i'm confident that my server setup is correct.
When i'm calling reports containing oracle graphics charts the reports simply hangs.
Consulting the ias server reports queue i can see that status is 'running the report, now executing pre-form trigger' and that's it. status never changes and the report never finishes.
In my ias 101202 home i've set the following environment variables:
ORACLE_GRAPHICS6I_HOME -> E:\oracle\806 which is where my oracle graphics is installed
GRAPHICS60_PATH -> e:\mastra\rep which is where i store my reports and oracle graphics charts
I keep both the .rdf file and the compiled .rep in the e:\mastra\rep directory.
Strange thing is that if i don't include the full path to the oracle graphics component in the report it's not able to find it at runtime. I can see in the reports status screeen it complains about not being able to fond the chart.
what parameter should i set so i don't have to hard code the path to the graphics chart?
If i include the full path to the chart it probably finds it because it doesn't complain but now it hangs telling me that it's running the preform trigger. and then nothing happens.
please help me cause im stuck here.
thanks for any input.
br
kim gabrielsen

Hi Frank,
Our reports are all called from Forms...using RUN_REPORT_OBJECT in the 10g environment. We have hundreds of reports (6i based) that all work fine when run on the 10g app server. The only ones that fail to complete are those that have Graphics embedded. Yet they work just fine when run Client/Server under 6i. On the 10g app server they just run forever/get hung.
If I launch Graphic 6i Builder on the 10g App Server box, I can connect to the database without any problems. And Graphics 6i do run just fine from my 10g forms (converted from 6i Forms) on the App Server. NOTE: My Graphics 6i uses the same tnsmanes.ora and sqlnet.ora that my App Server uses (via a TNS_ADMIN setting in the Windows registry)
Is there something extra special I need to do in the report itself?
Thanks,
John

Any Alternate to use ORACLE GRAPHIC BUILDER through Reports

Hello ,
After long research some option of creating complex graphs does not serve my problem like BI GRAPHS . I want to create graph in such a way that for example I have one view in which trainno, station no, scheduled time and departure time are stored. I want to display a line graph for same train schedul and depart wise. Now I try to create line graph in oracle 10g, there only one single line is displayed for two groups scheduled time and departure time and that also not sorting properly.
In previous of oracle , Graphic builder had good option of creating field templates like line and attaching to line chart. So it there are two groups (Sched and departure time) , than line with different colour use to display separately for both. Now I don't find any way in oracle 10g to plot such type of Graph.
If anybody has option or way than please give suggestion.
Regards,
Prashant

I am not an expert on chart builder, so I don't know how you would access the model and get at the image files.
However, if you have a URL that points to an image generated by the chart builder, you can use the <image> element to display it.
It sounds like to produce these image files, you need to write some application logic. The correct place to put this application logic is probably in a subclass of a struts DataAction.

Point Marked in Oracle Graphics

i have some problems regarding oracle graphics.
i am making curve charts. i have to mark my required points through a vertical & a
horizontal line (meeting point of both the lines will be my required point);
another question is i wanna mark a specified point through a round mark.
pl. help me out
thanks in advance
zulqarnain

somebody please help me, it's very urgent

Graphics problem with mbp late 2008,nvidia geforce 8600m gt.any help?

Hi,have graphics problems with my MacBook Pro 17" Late 2008.Every 3-4 days the graphics are not ok and when i want to restart there is only the apple logo but not clear and the cursor seems to be double.Sory my english is not the best.Any help for this Problem?

Get your computer to an Apple Store Genius Bar ASAP to be tested for the problem described in this article:
http://support.apple.com/kb/TS2377

TouchSmart 600-1050 - Graphics Problem with MS Outlook

I have a TouchSmart 600-1050. When I open MS Outlook, and then open the Calendar in a separate window, the window opens as non-maximized and everything is fine. When I maximize the window (I start in Week view), the tasks below each day do not stretch to fit their now wider column. It's as if the graphics don't recalculate for that screen element. Once I am maximized and see the problem, I have to switch to another view (e.g. Month or Day) and back to Week and it will fix itself. Feels like a graphics problem, underpowered chipset or bug in driver (?).
This was not a problem on my HP Desktop I had before, and it is not a problem on my 3 year old Lenovo ThinkPad X60. All are running W7 and using Office 2007.
Any ideas? The graphics driver is up to date according to HP Update and Device Manager.
Thanks!

Thanks for your reply. I tried both of your suggestions and the issue occurred in both. I've never noticed the sub-content not maximizing properly in other apps, but haven't tested thoroughly.
Any other ideas would be greatly appreciated.
- Should I checked a different way to see if I have the latest drivers?
- Is there any way for me to upgrade my 600-1050 with the graphics card in the 600-1055? The 1050's "Mobile PCI Express Module" is open/available. Could I buy the nVidia GeForce GT 230 that comes with the 1055 and hook that up?
Only reason I suggest this is that the graphics seem sluggish to update at times.
Thanks.

X230T - Major Windows 8 Graphics Problems

Hi all,
I own a X230 Tablet with the Intel HD4000 running Windows 8 Release Preview. I know it's still a beta but I was just wondering if anyone else has run into major graphics problems on Windows 8 Release Preview. I'm currently using the most up to date W8 64 bit Drivers from intel.
There is a huge amount of clipping, flickering and white backgrounds being shown as black. The apps I've noticed this in are OneNote MX (whenever pen input done), Windows Reader (All PDF white backgrounds are shown as black) and Internet Explorer 10 Metro (Tab previews have black bacgrounds). This is strange to me, though I've found at least one other X230T owner with identical problems.
Pictures, videos and descriptions can be found here: http://answers.microsoft.com/en-us/windows/forum/windows_8-winapps/intel-hd4000-onenote-mx-w8-reader...
Just wondering if Lenovo engineers are aware of this issue and if a fix exists/ is being worked upon. It's somehwat fustrating as it makes many core Windows 8 experiences unsuable (which was the point of buying a touch screen laptop).
Thanks
Solved!
Go to Solution.

welcome to the community.
how do the intel beta drivers you're running compare to the beta lenovo drivers available in the matrix here:
http://support.lenovo.com/en_US/downloads/detail.page?DocID=HT072084
actual video driver here:
http://support.lenovo.com/en_US/downloads/detail.page?&DocID=DS030728
posted 2 days ago.
cheers.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

W7/64-bit on W500 - Switchable Graphics problem

Hi,
Did a clean install Windows 7 Ultimate (64-bit) on my Thinkpad W500 (4062-3CG).
Having problem with "ThinkPad Switchable Graphics Driver for Windows 7".
ATI driver won't load, so default Intel chipset is used with poor graphics as a result.
I have also tried "Windows 7 BETA Drivers and Utilities" with no luck.
Yesterday the graphics worked for a short period of time, that was after remoting my Thinkpad with RDP? very strange. But after reboot graphics was back to non functional again.
Any ideas?
TIA
Johan

Did you apply Lenovo driver packages in any specific order? Don't really understand what I missed?
My plan was to do a "clean" W7/64 install and after that run ThinkVantage System Update 4.0 for latest drivers.
In my case ThinkVantage System Update 4.0 could not start without Access Help for Windows 7 installed, that was the first dependency problem.
However, after that ThinkVantage System Update 4.0 run successfully and everything works fine but the ThinkPad Switchable Graphics Driver for Windows 7.
The ThinkVantage System Update 4.0 applied latest updates for everything including the BIOS. When I try to run BIOS update separately for getting around the graphics problem it says BIOS version is OK and no update needed.
Tried to disable Switchable Graphics in BIOS-setup using Discrete but that does not fix my problem?

Switchable Graphic Problem AMD & Windows 8.1- Solved

Follow the steps accurately
1. Open This Pc or My Computer and then go to Uninstall or change a program
2. As the list is displayed, you will see Intel Graphic Driver & AMD Catalyst install manager. You have to uninstall it both in express mode so that no other previous setting are available anymore.
3. First, uninstall Intel Graphics driver. If it asks for a restarting the pc than go for it.
4. As the list is displayed, you will see AMD Catalyst install manager, right click it and uninstall it in express mode. Uninstall all the AMD component. Restart your PC as it will ask you.
5. Go to This Pc or My Computer and then C Drive. Open Program Files & Program Files (x86) both of them if you are running 64-bit Os. In the search box write AMD and you will find some remaining files- delete them all.
6. Now you PC is free of previous drives and the remaining files. Although right click to Windows sign and go to Device Manager. You will see Display adapters and uninstall them both. This step is not necessary but just to be sure that your PC has no previously installed drivers.
7. Open your browser and download the latest Intel Graphics Driver for your PC. My driver was Win64_153322. Install it. If you install it correctly than you are half way through. Restart your PC if it requires.
8. Go to AMD web site and download the latest driver. To avoid complicacy best option is to download Autodetect. Because it will choose the best appropriate driver for your system. File name is amddriverdownloader.
9. Open the file amddriverdownloader and download the driver. Download will be completed and it will start automatically the installation. Install it in express mode. Restart your PC as it will ask you to do it.
10. Hopefully your driver problems will be solved. To check it go to device manager and see if the drivers are installed correctly. Turn on CCC and give it a try to play a game in High Performance. You will see the problem is solved.
This is how I solved my AMD graphics problem. I been suffering since I installed Windows 8.1 just after it was released and today 15 Jun 14 I solved the issue. I can play any game in High performance now.
If you think my opinion is helpful to you than Please share it.
Liyad Salem Mridu.
Please hit Kudos, if I help you!

hey , can u help me ? i am having the same problem

Graphic Problem in OS X Mavericks?

well, i upgraded my machbook pro 15' to OS X Mavericks and now have been encountering graphic problems.
This is the Do Not Disturb part in my notification center.
Any Solution?
Regards,

You could try booting into Safe Mode. If all seems fine in Safe Mode, restart normally and see if it helped.

24" iMac (1st Gen\White), Graphics Problem(s)

Hi, I will have had my iMac for two years on Thursday (Christmas present, in a way) and it is currently starting to exhibit some weird graphical problems, horizontal lines are appearing in various applications, at random times, but the weird thing is that they stay in that app when i move the window around and I can take snapshots of them. I posted some to my MobileMe Gallery: http://gallery.me.com/mam693#100105
I installed Leopard on an iPod and those lines even showed up on the install DVD as well as the clean iPod making me believe its a hardware issue.
Now, I have been reading that other people have had similar problems and have had to pay around $800 to get it fixed, if anyone could confirm, I would greatly appreciate it. Or if anyone has any other suggestions they would be gladly appreciated.
Thanks,
Matt

Hello,
This sounds like a video card issue but if you haven't done so, check the hard disk for errors.
To check the hard disk:
Open Disk Utility, in the Utilities folder in the Applications folder.
Insert your Mac OS X Install disc in your computer’s optical drive or an optical drive connected to your computer, and then restart your computer. When you hear the startup tone, hold down the C key until you see the progress indicator, which looks like a spinning gear.
Follow the onscreen instructions until the Menu Bar appears with the Utilities menu in it, choose Utilities > Disk Utility, click First Aid, and then click the Verify button. If DU reports errors, click Repair. When it's finished, from the Menu Bar, select Utilities/Startup Disk. In the Startup Disk window select MacintoshHD 10.x.x and click Restart.
If it were me, I'd back the system up and erase the drive just to make sure it isn't a hardware issue and not have to shell out $$$$$.
Reinstalling Mac OS X
Under some circumstances, you may need to reinstall Mac OS X. You can reinstall Mac OS X while keeping your files and user settings intact.
NOTE: To reinstall Mac OS X from another computer on your network, see this topic:
Using Remote Install Mac OS X
To reinstall Mac OS X:
Insert the Mac OS X Install DVD and double-click the Install Mac OS X icon.
Follow the onscreen instructions. In the pane where you select the destination disk, select your current Mac OS X disk (in most cases, it will be the only one available).
Click Options.
If you want to save your existing files, users, and network settings, select “Archive and Install,” and then select “Preserve Users and Network Settings.”
If you want to erase everything on your computer and reinstall Mac OS X, select “Erase and Install.” You can’t recover erased data.
Click Continue.
Click Customize to select which parts of Mac OS X you’d like to install, or click Install to perform a basic installation (recommended).
NOTE: If you selected “Erase and Install” in step 3, you may need to use the Applications Install DVD that came with your computer to reinstall your iLife applications (GarageBand, iPhoto, iMovie, iDVD, and iWeb). If you are prompted to use the Applications Install DVD, insert the Applications Install DVD, double-click the Install Bundled Software icon, and then follow the onscreen instructions.
If you purchased a standalone version of Mac OS X, these installation instructions are in a PDF file located on the Mac OS X Install DVD.
If you need to reinstall the version of Mac OS X that was on your computer when you purchased it, or if you need to restore all the software on your computer, including Apple software, third-party applications, and other printer drivers, review the instructions in the manual that came with your computer.
If you need to reinstall Mac OS X and you’ve been using Time Machine for backup, you can easily restore your applications, files, and user settings from your Time Machine backup disk after you’ve reinstalled Mac OS X.
Happy Holidays!!!
Carolyn
Message was edited by: Carolyn Samit

Oracle Graphics problem

Similar Messages

Maybe you are looking for