Oracle Grid control 10G R2 failed
Hello all;
I just have installed Oracle Grid control 10G R2 on my PC ( xp sp2 ) , the installation continued until I found it is paused on OMS Configuration and gave me the following message :
Configuration assistant "OMS Configuration" failed
The "C:\grid_conrol_home\agent10g\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------
I looked at "C:\grid_conrol_home\agent10g\cfgtoollogs\configToolFailedCommands" file and I found :
oracle.sysman.emcp.agent.AgentPlugIn
Can you please help me in this issue .
Regards,
Have a look at the logs at:
C:\grid_control_home\agent10g\cfgtoollogs\omsca
FJFranken
Similar Messages
-
Steps to install Oracle grid control 10g on windows
dears ,
kindly I need to install oracle grid control 10g release 5 on windows
so please if any one have a detailed step-by-step document for that post it to me ASAP
Regards.Hi;
Please check below link
Oracle® Enterprise Manager Grid Control Installation and Configuration Guide 10g Release 5 (10.2.0.5.0)
http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/installing_em.htm
http://kamranagayev.wordpress.com/2011/01/31/video-tutorial-installing-oracle-10 gr2-grid-control-and-deploying-agent/
Regard
Helios -
Dear all.
I am new in oracle grid control 10g.
I just did the installation, but I have an critical alert " Number of Active Agents exceeded the critical threshold (1). Current value: 0"
As I understand this is because I put a proxy wile installing grid control and because of our proxy does not see local addresses grid controls does not see this agent.
How can I tell grid control to avoid proxy if he tries to connect to local address?Try posting in Grid Control forum:
Enterprise Manager -
Installing Oracle Grid control 10G fails at OMS configuration on Windows XP
I am trying to install Oracle 10G Grid control and it fails at OMS configuration. The log file under cfgttool logs shows failed command as
Oracle.sysman.emcp.oms.Omsplugin -ConfigureOms.
I tried to run command manually like the following:
C:\OracleHomes\oms10g -force Oracle.sysman.emcp.oms.Omsplugin -ConfigureOms.
Whe I run this command nothing happens. How should I got about it. Thanks in advance.
Venkatoracle.sysman.top.oms_<timestamp>log
has the following error messages and warnings.
[24-01-2011 13:45:21] Analyzing header for: C:/OracleHomes/oms10g/sysman/admin/emdrep/sql/core/latest/util/util_pkgdefs.sql
[24-01-2011 13:45:21] Header: <create type="pkgdefs" pos="ip/webapps/ip_webapp_pkgdef.sql+"/>
[24-01-2011 13:45:21] WARNING: Bad pos attribute in repmgr header.
[24-01-2011 13:45:21] WARNING: Either there is a non-existent file: "ip/webapps/ip_webapp_pkgdef.sql" in position attribute: "ip/webapps/ip_webapp_pkgdef.sql+"
[24-01-2011 13:45:21] WARNING: OR there is a bad repmgr header/no repmgr header in file: "ip/webapps/ip_webapp_pkgdef.sql"
At the end of the file:
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
'Enter Enterprise Manager Root Password :
************Enter Agent Registration password :
************Unable to connect to opmn.
Opmn may not be up.
================================================================================
opmn id=test-hv-ms2003e:6201
5 of 6 processes started.
ias-instance id=EnterpriseManager0.test-hv-ms2003e.teamqsi.com
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server
Error
--> Process (pid=2476)
failed to start a managed process after the maximum retry limit
Log:
C:\OracleHomes\oms10g\opmn\logs\HTTP_Server~1
INFO: oracle.sysman.top.oms:setOmsSecure:OMS Service command=secure oms -secure_port 1159:returned:
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Performing Command=CMD /C C:\OracleHomes\oms10g\bin\emctl.bat secure lock
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:CMD /C C:\OracleHomes\oms10g\bin\emctl.bat secure lock have completed with exitCode=0
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
'Oracle Enterprise Manager 10g Release 10.2.0.2.0
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Checking the security status of the OMS... Done.
Updating HTTPS Virtual Host for Enterprise Manager OMS... Done.
OMS Locked. Agents must be Secure and upload over HTTPS Port 1159.
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
INFO: oracle.sysman.top.oms:setOmsLocked:OMS Service command=secure lock:returned:
INFO: oracle.sysman.top.oms:configureOmsService:Oms Secure Configuration done.
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Performing Command=CMD /C C:\OracleHomes\oms10g\perl\5.6.1\bin\MSWin32-x86\perl.exe C:\OracleHomes\oms10g\sysman\install\precompilejsp.pl C:\OracleHomes\oms10g\j2ee\OC4J_EM\config\global-web-application.xml
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:CMD /C C:\OracleHomes\oms10g\perl\5.6.1\bin\MSWin32-x86\perl.exe C:\OracleHomes\oms10g\sysman\install\precompilejsp.pl C:\OracleHomes\oms10g\j2ee\OC4J_EM\config\global-web-application.xml have completed with exitCode=0
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
'precompiling the JSPs
precompiling the JSPs done
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
INFO: oracle.sysman.top.oms:configureOmsService:Precompile Jsps done.
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Performing Command=CMD /C C:\OracleHomes\oms10g\jdk\bin\java.exe -jar C:\OracleHomes\oms10g\sysman\jlib\emclikit.jar client -install_dir=C:\OracleHomes\oms10g\bin
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:CMD /C C:\OracleHomes\oms10g\jdk\bin\java.exe -jar C:\OracleHomes\oms10g\sysman\jlib\emclikit.jar client -install_dir=C:\OracleHomes\oms10g\bin have completed with exitCode=0
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
'Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
EM CLI client-side install completed successfully.
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
INFO: oracle.sysman.top.oms:configureOmsService:installAdditionalServices for 'client' completed=true
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Performing Command=CMD /C C:\OracleHomes\oms10g\bin\emctl.bat config agent updateTZ
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:CMD /C C:\OracleHomes\oms10g\bin\emctl.bat config agent updateTZ have completed with exitCode=0
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
'Oracle Enterprise Manager 10g Release 10.2.0.2.0
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
INFO: oracle.sysman.top.oms:configureOmsService:fixTimeZone completed=true
INFO: oracle.sysman.top.oms:OmsPlugIn:Requested Configuration Step 4 have been completed with status=true
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Performing Command=CMD /C C:\OracleHomes\oms10g\opmn\bin\opmnctl stopall
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:CMD /C C:\OracleHomes\oms10g\opmn\bin\opmnctl stopall have completed with exitCode=0
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
'opmnctl: stopping opmn and all managed processes...
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Performing Command=CMD /C C:\OracleHomes\oms10g\opmn\bin\opmnctl startall
INFO: oracle.sysman.top.oms:Start Opmn Error = CMD /C C:\OracleHomes\oms10g\opmn\bin\opmnctl startall
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:CMD /C C:\OracleHomes\oms10g\opmn\bin\opmnctl startall have completed with exitCode=206
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
'opmnctl: starting opmn and all managed processes...
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
'================================================================================
opmn id=test-hv-ms2003e:6201
5 of 6 processes started.
ias-instance id=EnterpriseManager0.test-hv-ms2003e.teamqsi.com
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server
Error
--> Process (pid=2992)
failed to start a managed process after the maximum retry limit
Log:
C:\OracleHomes\oms10g\opmn\logs\HTTP_Server~1
INFO: oracle.sysman.top.oms:OmsPlugIn:Requested Configuration Step 5 have been completed with status=false
INFO: oracle.sysman.top.oms:EmcpPlug:invoke:Completed EmcpPlug invoke method on an aggregate=oracle.sysman.top.oms for Action=configuration in step=2:microstep=0
INFO: oracle.sysman.top.oms:The plug-in OMS Configuration has failed its perform method -
Install grid control 10g Server 2003
Hello all;
I have installed Oracle Grid control 10G on my PC ( server 2003 ) , the installation continued until I found it is paused on OMS Configuration and gave me the following message :
Configuration assistant "OMS Configuration" failed
The "C:\grid_conrol_home\agent10g\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------
I looked at "C:\grid_conrol_home\agent10g\cfgtoollogs\configToolFailedCommands" file and I found :
oracle.sysman.emcp.agent.AgentPlugIn
the file OMS_HOST/sysman/logs/emoms.log
2011-04-04 09:30:20,250 [Thread-18] WARN jdbc.ConnectionCache _getConnection.353 - Got a fatal exeption when getting a connection; Error code = 17002; Cleaning up cache and retrying
2011-04-04 09:30:20,250 [Thread-18] ERROR em.notification unregisterOMS.1417 - Error unregistering: Exception d'E/S: SO Exception was generated
java.sql.SQLException: Exception d'E/S: SO Exception was generated
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:174)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:286)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:327)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:433)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:150)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:31)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:571)
at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:217)
at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPhysicalConnection(OracleConnectionPoolDataSource.java:108)
at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPooledConnection(OracleConnectionPoolDataSource.java:76)
at oracle.jdbc.pool.OracleImplicitConnectionCache.makeCacheConnection(OracleImplicitConnectionCache.java:1331)
at oracle.jdbc.pool.OracleImplicitConnectionCache.getCacheConnection(OracleImplicitConnectionCache.java:422)
at oracle.jdbc.pool.OracleImplicitConnectionCache.getConnection(OracleImplicitConnectionCache.java:330)
at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:285)
at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:178)
at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:158)
at oracle.sysman.util.jdbc.ConnectionCache._getConnection(ConnectionCache.java:359)
at oracle.sysman.util.jdbc.ConnectionCache._getConnection(ConnectionCache.java:322)
at oracle.sysman.util.jdbc.ConnectionCache.getUnwrappedConnection(ConnectionCache.java:575)
at oracle.sysman.emSDK.svc.conn.FGAConnectionCache.getFGAConnection(FGAConnectionCache.java:207)
at oracle.sysman.emSDK.svc.conn.ConnectionService.getSystemConnection(ConnectionService.java:1303)
at oracle.sysman.emdrep.notification.NotificationMgr.unregisterOMS(NotificationMgr.java:1408)
at oracle.sysman.emdrep.notification.NotificationMgr.destroy(NotificationMgr.java:1867)
at oracle.sysman.emSDK.svc.ServiceUtil.cleanupServices(ServiceUtil.java:212)
at oracle.sysman.eml.app.ContextInitializer.contextDestroyed(ContextInitializer.java:851)
at com.evermind.server.http.HttpApplication.destroy(HttpApplication.java:5980)
at com.evermind.server.http.HttpSite.destroy(HttpSite.java:936)
at com.evermind.server.http.HttpServer.destroy(HttpServer.java:632)
at com.evermind.server.ApplicationServer.destroy(ApplicationServer.java:2102)
at com.evermind.server.ApplicationServerShutdownHandler.run(ApplicationServerShutdownHandler.java:39)
at java.lang.Thread.run(Thread.java:534)
the file installAction.log
Start Processing configuration tool Enterprise manager Website Configuration Assistant ....
Preparing for copying C:\OracleHomes\oms10g\sysman\log\* to C:\OracleHomes\oms10g\cfgtoollogs
Expanding source path C:\OracleHomes\oms10g\sysman\log\*
Adding the file C:\OracleHomes\oms10g\sysman\log\emctl.log from the file path expanding...
Adding the file C:\OracleHomes\oms10g\sysman\log\emdctl.log from the file path expanding...
Adding the file C:\OracleHomes\oms10g\sysman\log\emdctl.trc from the file path expanding...
Adding the file C:\OracleHomes\oms10g\sysman\log\emoms.log from the file path expanding...
Adding the file C:\OracleHomes\oms10g\sysman\log\emoms.trc from the file path expanding...
Adding the file C:\OracleHomes\oms10g\sysman\log\pafLogs from the file path expanding...
Completed copying file C:\OracleHomes\oms10g\sysman\log\emctl.log to C:\OracleHomes\oms10g\cfgtoollogs\emctl.log
Completed copying file C:\OracleHomes\oms10g\sysman\log\emdctl.log to C:\OracleHomes\oms10g\cfgtoollogs\emdctl.log
Completed copying file C:\OracleHomes\oms10g\sysman\log\emdctl.trc to C:\OracleHomes\oms10g\cfgtoollogs\emdctl.trc
Completed copying file C:\OracleHomes\oms10g\sysman\log\emoms.log to C:\OracleHomes\oms10g\cfgtoollogs\emoms.log
Completed copying file C:\OracleHomes\oms10g\sysman\log\emoms.trc to C:\OracleHomes\oms10g\cfgtoollogs\emoms.trc
Number of file(s) copied is 5
Number of directories copied is 0
End Processing configuration tool Enterprise manager Website Configuration Assistant
Start Processing configuration tool DCM Repository Backup Assistant ....
Preparing for copying C:\OracleHomes\oms10g\dcm\logs\* to C:\OracleHomes\oms10g\cfgtoollogs
Expanding source path C:\OracleHomes\oms10g\dcm\logs\*
Adding the file C:\OracleHomes\oms10g\dcm\logs\daemon_logs from the file path expanding...
Adding the file C:\OracleHomes\oms10g\dcm\logs\dcmctl_logs from the file path expanding...
Adding the file C:\OracleHomes\oms10g\dcm\logs\emd_logs from the file path expanding...
Number of file(s) copied is 0
Number of directories copied is 0
End Processing configuration tool DCM Repository Backup Assistant
INFO: Le script "C:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands" contient toutes les commandes qui ont échoué, ou qui ont été ignorées ou annulées. Ce fichier peut servir à exécuter ces assistants de configuration en dehors d'OUI. Vous pouvez être amené à mettre à jour ce script avec les mots de passe (éventuels) avant de l'exécuter.
INFO: Created a new file C:\OracleHomes\oms10g\cfgtoollogs\configToolFailedCommands
INFO: Since the option is to overwrite the existing C:\OracleHomes\oms10g\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\OracleHomes\oms10g\cfgtoollogs\configToolFailedCommands.bak
INFO: Created a new file C:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands
INFO: Since the option is to overwrite the existing C:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands.bak
GRAVE: OUI-25031 : Echec de certains assistants de configuration. Il est vivement recommandé de les relancer immédiatement. Une exécution incorrecte d'un assistant marqué comme Recommandé signifie que le système est mal configuré.
1. Dans le panneau Détails de l'écran de l'assistant de configuration, consultez les erreurs à l'origine des échecs détectés.
2. Corrigez ces erreurs.
3. Sélectionnez les assistants ayant échoué et cliquez sur le bouton Réessayer pour les relancer.
INFO: Sélection utilisateur : Oui/OK
file hosts
127.0.0.1 localhost.localdomain localhost
192.168.2.195 srvmid1.com.tn srvmid1
please you ca help me...Check if the last post in http://cn.forums.oracle.com/forums/thread.jspa?threadID=477659&tstart=0&start=15 can be the solution for you. Remember, the error is in the last step of the configuration process. So it only concerns the agent. The OMS and OMR were (as I see it) correctly configured.
Eric -
Dear all.
I am new in oracle grid control 10g.
I just did the installation, but I have an critical alert " Number of Active Agents exceeded the critical threshold (1). Current value: 0"
As I understand this is because I put a proxy wile installing grid control and because of our proxy does not see local addresses grid controls does not see this agent.
How can I tell grid control to avoid proxy if he tries to connect to local address?Have a look at $ORACLE_HOME\install\portlist.ini for the ports in use for your installation.
By Default, it uses the non-secure port of 4889 which I do not think requires opening. -
OMS Configuration Failed In the Process of Installing OEM Grid Control 10g
Hi every one,
i am getting the same problem in the installation Configuration Assistants, OMS Configuration Failed
I have already installed the Oracle software, created the databse and when i started installation, i selected the 2nd option to use the existing database.
here is i am getting the error:
details says that are as follows
oui-25031 oracle.sysman.emcp.agent.agentplugin,
so i followed the steps and drop the sysman user with cacade option
again i got the same error,
Environment:
Microsoft Windows XP Professional SP3,
Oracle 10G 10.2.0.1.0 (Already Installed)
Dell Inspiron 530
Intel(R)Core(TM)2 Quad CPU [email protected], 3.0GB RAM
have enough hard disk.
Now installing Oralce Enterprise Manager Grid Control 10g release2 (10.2)
i have seen the error messages in this forum many are on unix environment.
any views on windows operating system?
Thank You.hi,
before you install grid, try and patch the database to a later release, 10.2.0.4
had this issue in work and patching the db resolved the issue.
I did install database software only, then patch then create database, then install grid
regards
Alan -
Database Grid Control 10g and Oracle 8i v.3....
Hi ,
Is it possible for Database Grid Control 10g to administer and monitor the Oracle 8i v.3, namely Oracle 8.1.7. database ...?????
Many thanks ,
SimonYes, that is possible. We are using OMS 10.2.0.2, Agents 10.2.0.2 to monitor 8.1.7.4 Databases.
Also check MetaLink Notes:
377462.1 - ORA-00942 When Trying To View Tablespaces For An 8.1.7.4 Database
373394.1 - Receiving ORA-1031 When Gathering Metrics Against 8.1.7.4 Database From Grid Control 10.2
Regards,
Martin -
Installing Grid Control 10g Release 1 - Memory Check Fails
Hi to all,
I'm trying to install the Grid Control 10g on a Red Hat Enterprise Linux AS release 4 . I have configured the Computer OK , but when I try to install the Grid Control, the OUI says that the system only has 1 MB of RAM. The computer has 2 GB and only 150 MB is being used, what is the problem? what can I do?
Thanx for all.
P.D.: Sorry for my English.Hi!
Those are my kernel parameters:
kernel.sem = 256 32000 100 142
kernel.shmmni = 4096
kernel.shmall = 2097152
kernel.shmmax = 2147483648
fs.file-max = 206067
net.ipv4.ip_local_port_range = 32768 65000
net.core.rmem_default = 262144
net.core.rmem_max = 262144
net.core.wmem_default = 262144
net.core.wmem_max = 262144
And those are the Kernel Parameters Requirements:
Red Hat Enterprise Linux 4.0
semmsl = 250
semmsl2 = 250
semmns = 32000
semopm = 100
semmni = 128
shmmax = 536870912
shmmni = 4096
shmall = 2097152
filemax = 65536
ip_local_port_range = 1024 65000
rmem_default = 262144
rmem_max = 262144
wmem_default = 262144
wmem_max = 262144
As you can see all the parameters are set correctly. -
EM Grid control 10G installtion problem ........
I m trying to install EM grid control 10G release 2, it prompt error on OMS configuration:
Failed status
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Performing Command=CMD /C e:\OracleHomes\oms10g\opmn\bin\opmnctl startall
INFO: oracle.sysman.top.oms:Start Opmn Error = CMD /C e:\OracleHomes\oms10g\opmn\bin\opmnctl startall
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:CMD /C e:\OracleHomes\oms10g\opmn\bin\opmnctl startall have completed with exitCode=206
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
'opmnctl: starting opmn and all managed processes...
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
'================================================================================
opmn id=testpc:6201
5 of 6 processes started.
ias-instance id=EnterpriseManager0.testpc
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server
Error
--> Process (pid=7112)
failed to start a managed process after the maximum retry limit
Log:
e:\OracleHomes\oms10g\opmn\logs\HTTP_Server~1
INFO: oracle.sysman.top.oms:OmsPlugIn:Requested Configuration Step 5 have been completed with status=false
INFO: oracle.sysman.top.oms:EmcpPlug:invoke:Completed EmcpPlug invoke method on an aggregate=oracle.sysman.top.oms for Action=configuration in step=2:microstep=0
INFO: oracle.sysman.top.oms:The plug-in OMS Configuration has failed its perform method
config tools failed command
rem Copyright (c) 1999, 2006, Oracle. All rights reserved.
oracle.sysman.emcp.agent.AgentPlugIn
Pl suggest remedy
Thnx13/10/23 09:34:58 10.1.2.0.2 Stopped (Shutdown executed by jazn.com/admin from 127.0.0.1 (localhost))
13/10/23 09:36:38 10.1.2.0.2 Started
13/10/23 09:36:38 10.1.2.0.2 Started
13/10/23 09:36:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:37:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:37:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:38:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:38:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:39:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:39:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:40:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:40:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:41:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:41:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:42:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:42:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:43:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:43:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:44:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:44:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:45:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:45:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:46:22 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:46:52 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1380909112#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12604
13/10/23 09:47:20 10.1.2.0.2 Stopped (Shutdown executed by jazn.com/admin from 127.0.0.1 (localhost))
13/10/23 09:48:59 10.1.2.0.2 Started
13/10/23 09:49:00 10.1.2.0.2 Started
13/10/23 09:49:13 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1429536831#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12605
13/10/23 09:49:43 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1429536831#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12605
13/10/23 09:50:13 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1429536831#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12605
13/10/23 09:50:43 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1429536831#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12605
13/10/23 09:51:13 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1429536831#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12605
13/10/23 09:51:43 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1429536831#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12605
13/10/23 09:52:13 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1429536831#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12605
13/10/23 09:52:43 Published an event: C_192.168.0.192.121f1d.141dfd0ddfc.-8000#EnterpriseManager0.testpc#1429536831#D#OC4J_EM#default_island&testpc&HTTP:testpc#12504&RMI:testpc#12404&JMS:testpc#12605 -
Grid Control agent install fails
Hi all,
I'm trying to install Oracle Grid control agent on linux machine and getting the following error:
./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-2.1, redhat-3, SuSE-8 or SuSE-9
Passed
All installer requirements met.
Checking Temp space: must be greater than 80 MB. Actual 1544 MB Passed
Checking swap space: must be greater than 150 MB. Actual 1701MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2004-12-20_08-44-53AM. Please wait ...
Error in writing to directory /tmp/OraInstall2004-12-20_08-44-53AM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
My /tmp has 1.5 GB of free space so that's really not the issue here. I know that the installation goes well if I use the Universal Installer that comes bundled with 10G RDBMS, but on machines with Oracle 8.1.7.4-9.2.0.5 I wouldn't like to update OUI's because of this issue. Anyone having this problem/solution?
Br,
AnssiThe issue is not about silent install or temp or root.
I have installed Agent on Linux without issues after I read closely the oracle requirements on linux.
Make sure you read oracle linux requirement, there is a patch you need to download that will create proper setting for oracle on linux.
Try look for Application Server 10g installation guide, this patch is documented for Application Server 10g on linux.
The patch will create oracle.sh file that linux will run each time user oracle is activated.
If you still get problem let me know through forum or direct.
Thanks
George -
Alert Log File Monitoring of 8i and 9i Databases with EM Grid Control 10g
Is it possible to monitor alert log errors in Oracle 8i/9i Databases with EM Grid Control 10g and EM 10g agents? If yes, is it possible to get some kind of notification?
I know that in 10g Database, it is possible to use server generated alerts, but what about 8i/9i?
Regards,
MartinHello
i am interested in a very special feature: is it possible to get notified if alerts occur in alert logs in an 8i/9i database when using Grid control and the 10g agent on the 8i/9i systems?
Moreover, the 10g agent should be able to get Performance Data using the v$ views or direct sga access without using statspack, right?
Do you know where I can find documentation about the supported features when using Grid Control with 8i/9i databases? -
Problem while installing Oracle Grid Control 10.2.0.2 in XP
Hi Gurus,
M trying to install Oracle Grid Control 10.2.0.2 in XP.
This is the 4th day.
Everything goes fine till Web Cache Configuration Assistant.
After that the below error happens:
Command = G:\OracleHomes\oms10g\jdk\bin\javaw.exe -DORACLE_HOME=G:\OracleHomes\oms10g -Djava.net.preferIPv4Stack=true -classpath G:\OracleHomes\oms10g\sysman\webapps\emd\WEB-INF\lib\webcachecfg.jar;G:\OracleHomes\oms10g\sysman\webapps\emd\WEB-INF\lib\emd.jar;G:\OracleHomes\oms10g\lib\emSDK.jar;G:\OracleHomes\oms10g\dcm\lib\dcm.jar;G:\OracleHomes\oms10g\jlib\repository.jar;G:\OracleHomes\oms10g\lib\xmlparserv2.jar;G:\OracleHomes\oms10g\jlib\emConfigInstall.jar;G:\OracleHomes\oms10g\jdbc\lib\classes12.zip;G:\OracleHomes\oms10g\jdbc\lib\nls_charset12.jar;G:\OracleHomes\oms10g\jlib\jndi.jar;G:\OracleHomes\oms10g\jlib\rt.jar;G:\OracleHomes\oms10g\jdk\lib\i18n.jar;G:\OracleHomes\oms10g\jlib\ldapjclnt10.jar;G:\OracleHomes\oms10g\jlib\ojmisc.jar;G:\OracleHomes\oms10g\j2ee\home\jazn.jar;G:\OracleHomes\oms10g\j2ee\home\jaas.jar oracle.ias.webcache.config.WebcacheConfig -oh G:\OracleHomes\oms10g
2
Failed in smi manipulation().
Error initializing SMISessionManager.createSession().
Resolution:
Please make sure the file is in the correct location.
Base Exception:
This command requires communication with DCM daemon, the communication failed. The base exception is {0}.
Resolution:
Check the base exception to determine why the operation failed.
oracle.ias.sysmgmt.exception.TaskException: Base Exception:
This command requires communication with DCM daemon, the communication failed. The base exception is {0}.
Resolution:
Check the base exception to determine why the operation failed.
at oracle.ias.sysmgmt.task.TaskMaster.daemon_exec(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMaster.process(Unknown Source)
at oracle.ias.sysmgmt.smi.remote.RemoteEntitySource.createRequestAndExecute(Unknown Source)
at oracle.ias.sysmgmt.smi.remote.RemoteEntitySource.createRequestAndExecute(Unknown Source)
at oracle.ias.sysmgmt.smi.remote.RemoteEntitySource.getRootEntity(Unknown Source)
at oracle.ias.sysmgmt.entity.Session.<init>(Unknown Source)
at oracle.ias.sysmgmt.smi.SMIEntryPoint.<init>(Unknown Source)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at oracle.ias.sysmgmt.smiapi.SMISessionManager.loadAndCreateInstance(Unknown Source)
at oracle.ias.sysmgmt.smiapi.SMISessionManager.createSession(Unknown Source)
at oracle.ias.sysmgmt.EntryPoint.getConfiguration(Unknown Source)
at oracle.ias.webcache.config.WebcacheConfig.smiSetup(WebcacheConfig.java:489)
at oracle.ias.webcache.config.WebcacheConfig.smiEnableWebcache(WebcacheConfig.java:454)
at oracle.ias.webcache.config.WebcacheConfig.enableConfiguration(WebcacheConfig.java:299)
at oracle.ias.webcache.config.WebcacheConfig.main(WebcacheConfig.java:87)
Steps followed further:
1) Have tried the below commands to check the status of dcmctl:
G:\OracleHomes\oms10g\opmn\bin>G:\OracleHomes\oms10g\dcm\bin\dcmctl.bat getstate
Current State for Instance:EnterpriseManager0.l-716429
Component Type Up Status In Sync Status
================================================================================
1 home OC4J Up True
2 HTTP_Server HTTP_Server Up True
2) Also tried the below command to check the status of opmnctl.
D:\Documents and Settings\arijit>G:\OracleHomes\oms10g\opmn\bin\opmnctl.exe status
Processes in Instance: EnterpriseManager0.l-716429
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
DSA | DSA | 2140 | Alive
HTTP_Server | HTTP_Server | 3544 | Alive
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | 2068 | Alive
OC4J | home | 2560 | Alive
WebCache | WebCache | 1800 | Alive
WebCache | WebCacheAdmin | 1960 | Alive
3) After that tried to "Retry" the Web cache configuration Assistant, but still the error is continuing.
Please someone help.
Regards,
ArijitHi,
Have made the %WINDIR%\system32\drivers\etc\hosts file as below:
#127.0.0.1 localhost
172.16.58.203 L-716429
And "Retry" Web cache configuration. Same error is popping up.
Please help. -
How to install Grid Control 10g Release 3?
Hello,
I need install Grid Control 10g Release 3 for Linux x86_64 on SUSE 9, and I need some tips about this instalation.
I need registry 3 database, 1 DB is 10g and the others are in 9.2.
Can I help me?
Thank'sIf you installed the 64-bit SLES-9, you are on the only platform that has a full install of 10gR3 Grid Control available:
http://www.oracle.com/technology/software/products/oem/index.html
Everyone else must install 10gR2 fully, then patch up to 10gR3.
Run runInstaller to start installation
- When asked for "install type" option, choose "Enterprise Manager using New Database" option
- Complete installation as per install guide
- Install the 10gR3 agent install on any additional servers that require monitoring.
Load and execute orarun to enable the correct kernel options if you not done so already. It can be downloaded from www.suse.com/oracle. Comment out any IPv6 entries from /etc/hosts. The O/S should be setup similar to the AS 10.1.2 install doc for SLES9:
http://ftp.novell.com/partners/oracle/docs/iAS10gR2_sles9_install.pdf -
Oracle Grid Control and Oracle Application Management Pack for Siebel
I am trying to get the Oracle Grid Control Software to work with the Siebel Application Management Pack so that I can effectively monitor Siebel. The client I am at does not have a budget for proper monitoring solution therefore, I have chosen the free alternative. Anyway, the Oracle 10G Agent is running on all the windows Siebel Servers and all of the Siebel Servers appear within the Oracle Grid Control management tool. At this time I am more interested in monitoring the Siebel metrics versus the windows metrics.. I have added Siebel as a Target Subtab within Oracle Grid Control. I have also successfully run through the Oracle Agent 10G SiebelClassPathfix.bat command on each Siebel Windows Server. What I am not able to do is add a Siebel Enterprise through the Oracle Grid Control Manager Software. When I attempt to add a Siebel Enterprise I receive the following error message. Any suggestions would be beneficial.
An error occured while adding Siebel Enterprise.
Credentials - Missing Credentials for host halcrmtgw01.dinghy.hal.testPlease log a service request with tech support so that we can track this inquiry. On the service request, capture a screenshot of the page where you defined the host preferred credentials, and tell us the names of your servers.
Btw, I take that you are stuck in the step in which you:
- Click the "Add Enterprise" button to add the enterprise
- Fill in the 7 parameters
- Click Ok to start the discovery process
Which release of Siebel and Enterprise Manager are you using?
Chung
Maybe you are looking for
-
Multiple rows in BI Infocube/or DSO for one row in source system
Hi Gurus, I have a typical scenario where in I have a ztable in R/3 system and it contains some custome transaction data. The business scenario wants it to split into multiple records in BI ( ofcourse keys for each records in BI would be unique). Eit
-
What are the different ports required to Deploy(Run) an application in NWDS
Hi all, We have a issue here in deploying our application in NWDS. As we are accessing our servers(from another country) thru firewalls in between, most of the ports are blocked for security reasons,henceforth, we are unable to deploy our application
-
A Problem occured with this webpage so it was reloaded this is popping up when I open any forum using safari on my iPad mini this is been happening ever since I have downloaded iOS 8 I tried to reset all the settings and reset network settings but no
-
How to remove 'Change to Text Mode' link on 'richTextEditor' item
Hi, Now I'm using 'richTextEditor' item on my page. But above it, there is a link named 'Change to Text Mode'. How can I remove it? From profile, if I change the profile, it will be Text Mode only. But I want to use rich text mode, not use text mode.
-
Adding 1 hour to photo's time of creation (aka change the photo's time zone
Hi I had my camera's time set incorrectly (1 hour less than the actual time), so all the photos I took during my vacation have this error embedded onto them. Is it possible to use iPhoto or any other tool to add 1 hour to the time of creation of each