Oracle Grid Siebel Agent Documentation

I am looking for any Oracle Grid Siebel Agent documentation. I recently implemeted the Siebel Agent within Oracle Grid 10.2.0.4 and am looking for any documentation around configuring the metrics that come with the Siebel Agent. It appears that it is scaled dwon from other monitoring solution software which I have used in the past however, I am still evaluating it so any solid documentation would be of great assistance. Again, I do not need the documentation around the base Oracle Grid DB monitoring but the Siebel Agent which is monitored from within the Oracle Grid tool.
Thanks

Siebel Pack specific information is contained in the Oracle Application Management Pack for Siebel Getting Started Guide. Look for it at
http://download.oracle.com/docs/cd/B16240_01/doc/em.102/b32394/toc.htm
Chung
Application Management Blog<br><br>

Similar Messages

Grid Control agent install fails

Hi all,
I'm trying to install Oracle Grid control agent on linux machine and getting the following error:
./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-2.1, redhat-3, SuSE-8 or SuSE-9
Passed
All installer requirements met.
Checking Temp space: must be greater than 80 MB. Actual 1544 MB Passed
Checking swap space: must be greater than 150 MB. Actual 1701MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2004-12-20_08-44-53AM. Please wait ...
Error in writing to directory /tmp/OraInstall2004-12-20_08-44-53AM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
My /tmp has 1.5 GB of free space so that's really not the issue here. I know that the installation goes well if I use the Universal Installer that comes bundled with 10G RDBMS, but on machines with Oracle 8.1.7.4-9.2.0.5 I wouldn't like to update OUI's because of this issue. Anyone having this problem/solution?
Br,
Anssi

The issue is not about silent install or temp or root.
I have installed Agent on Linux without issues after I read closely the oracle requirements on linux.
Make sure you read oracle linux requirement, there is a patch you need to download that will create proper setting for oracle on linux.
Try look for Application Server 10g installation guide, this patch is documented for Application Server 10g on linux.
The patch will create oracle.sh file that linux will run each time user oracle is activated.
If you still get problem let me know through forum or direct.
Thanks
George

Grid Control Agent on Mac OS

Has anyone been successful in installing the Oracle Grid Control Agent Only on a Mac OS X? I have used the agent_download script and the software installs. But I cannot get the agent to start. When I execute
emctl start agent
I get
Starting agent ................................. failed.
When I re-execute the configToolCommands script, I get
The Management Agent Configuration Assistant has failed. The following failures were recorded:
Enterprise Manager Website target configuration failed.
Agent Service Failed to start

Has anyone been successful in installing the Oracle Grid Control Agent Only on a Mac OS X? I have used the agent_download script and the software installs. But I cannot get the agent to start. When I execute
emctl start agent
I get
Starting agent ................................. failed.
When I re-execute the configToolCommands script, I get
The Management Agent Configuration Assistant has failed. The following failures were recorded:
Enterprise Manager Website target configuration failed.
Agent Service Failed to start

Installing Oracle Grid Agent on R12 E-Business suite

All,
I have 10.2.0.3 OEM Grid Server installed and configured. This has been monitoring few of my standalone and dataguard production databases in which Oracle grid agents are installed and configured.
I have recently deployed R12 E-business suite with two application nodes and one database in a F5 load balancer environment. I am wanting to install and configure Oracle Grid agent on R12 EBS Application and Database nodes to monitor my R12 EBS by making use of existing Oracle Grid server.
Has anyone installed and configured Oracle grid agent on R12 Application and database nodes?
Any informantion/pointers that anyone can provide on the above would be greatly appreciated.
Thanks,
Palani

Do you know the ports that need to be opened between Application Tier and Grid control server?Not sure what grid control version you are installing. However, if you choose to go with the default ports then see the documentation for the list of ports you need to open -- http://www.oracle.com/pls/em111/search?word=Ports&format=ranked&remark=quick_search
Thanks,
Hussein

Oracle Grid Control and Oracle Application Management Pack for Siebel

I am trying to get the Oracle Grid Control Software to work with the Siebel Application Management Pack so that I can effectively monitor Siebel. The client I am at does not have a budget for proper monitoring solution therefore, I have chosen the free alternative. Anyway, the Oracle 10G Agent is running on all the windows Siebel Servers and all of the Siebel Servers appear within the Oracle Grid Control management tool. At this time I am more interested in monitoring the Siebel metrics versus the windows metrics.. I have added Siebel as a Target Subtab within Oracle Grid Control. I have also successfully run through the Oracle Agent 10G SiebelClassPathfix.bat command on each Siebel Windows Server. What I am not able to do is add a Siebel Enterprise through the Oracle Grid Control Manager Software. When I attempt to add a Siebel Enterprise I receive the following error message. Any suggestions would be beneficial.
An error occured while adding Siebel Enterprise.
Credentials - Missing Credentials for host halcrmtgw01.dinghy.hal.test

Please log a service request with tech support so that we can track this inquiry. On the service request, capture a screenshot of the page where you defined the host preferred credentials, and tell us the names of your servers.
Btw, I take that you are stuck in the step in which you:
- Click the "Add Enterprise" button to add the enterprise
- Fill in the 7 parameters
- Click Ok to start the discovery process
Which release of Siebel and Enterprise Manager are you using?
Chung

Install Grid Control Agent 10.2.0.5 on Oracle Applications 11i

Hi,
I am planing to add my Oracle Applications 11i (APP and DB tier) to Grid Control 10.2.0.5, installing the Grid Control Agents (10.2.0.5) on both nodes.
Please tell me is there any specific in this installation of GC Agents on Oracle Applications 11i nodes (any document about this).
Regards

Hi,
Please see these docs/links.
Getting Started with Oracle Application Management Pack and Oracle Application Change Management Pack for Oracle E-Business Suite, Release 3.1 [ID 982302.1]
Oracle Application Management Pack and Oracle Application Change Management Pack for Oracle E-Business Suite, Release 3.0 [ID 812315.1]
Troubleshooting Guide and Known Issues List for the Oracle Application Management Pack for Oracle E-Business Suite, Release 3.0 [ID 812294.1]
Grid Control 10.2.0.5.0 Known Issues [ID 787872.1]
Application Management Pack and Application Change Management Pack 3.1 Now Available
http://blogs.oracle.com/stevenChan/2010/01/amp_acmp_31_ebs.html
Enterprise Manager Documentation -- 10g Release 5 (10.2)
http://download.oracle.com/docs/cd/B16240_01/welcome.html
Thanks,
Hussein

How to install Oracle Grid Agent 11g into windows hosts ?

Hi there, I was not able to deploy management agents into windows hosts machines !
I followed steps below and I am getting these errors :
On windows 2003 server, I have downloaded grid agent here :
D:\grid\Windows_X64_Grid_Control_agent_download_11_1_0_1_0\windows_x64\agent
I have setup.exe file ! When I double click it, I got this message :
Only silent installation is supported search help.
Well, I did a lot of times setup.exe -silent -responseFile <path>additional_response.rsp and the setup process tells me that I am not following the security procedures.
I am newbie on Grid!
I don´t want deploy agent using deployment wizard due to security resctrictions, they do not allow openssh servers on windows servers.
Have you guys succeeded with this installation ? I mean, install fresh agent on single target windows server machine!
I would appreciate any help.
Tks.
Edson - CLARO

Edson,
what I would do is go for the cloning option.
On the OMS Server an Agent has been installed as part of the OMS installation.
Stop this Agent
AGENT_HOME/bin/emctl stop agent
Create a zip file from the agent11g folder
Copy it to a server where you want to install the Agent
unzip the folder in the location where you want to install
Restart the Agent you had stopped on your OMS server
AGENT_HOME/bin/emctl start agent
On the destination server
Then from the AGENT_HOME/oui/bin
runInstaller -clone -forceClone ORACLE_HOME=<full path of Agent Folder> ORACLE_HOME_NAME=OracleHomeAgent11g -noconfig -silent b_chainedInstall=false oracle.sysman.top.agent:s_installType=AGENT
Then from AGENT_HOME/bin/agentca -f
AGENT_HOME/root.sh (Under Unix this needs to be run as user root, not sure if this procedure is the same under Windows)
This is based on the procedure described in MOS note : How to Clone a Management Agent And Known Issues [ID 579156.1] which referes to a 10.2.0 Agent, but I have been able to use this procedure under Windows with a 11.1 Agent as well.
Goodluck
Regards
Rob
http://oemgc.wordpress.com

How to monitory Siebel and E-business with Oracle Grid Control 12c

Hi All,
Please i need any documents for Monitoring Siebel and E-business with Oracle Grid Control 12c.
Thanks in advance,
Mostafa

I would think this is indeed the only way to monitor the URL.
Perhaps you could try a solution in creating your own plug-in.
Check http://www.oracle.com/technetwork/oem/extensions/index.html for this.
Regards
Rob
http://oemgc.wordpress.com

Oracle grid & Oracle agent

Hi,
Could anybody tell me how could I check where is an issue in the Oracle Grid ?
Oracle EM Grid Control is working (on one computer)
Oracle Agent is working on another computer, but the Grid cannot see the agent working ( or the agent cannot register to the grid control )
[oracle@PC1 agent]$ emctl status agent
TZ set to Europe/Paris
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
Agent Version : 10.1.0.4.1
OMS Version : Unknown
Protocol Version : 10.1.0.2.0
Agent Home : /u01/oracle/10gOHome/PC1.localdomain_PRD1
Agent binaries : /u01/oracle/10gOHome
Agent Process ID : 13792
Parent Process ID : 13789
Agent URL : http://PC1.localdomain:3938/emd/main
Started at : 2008-03-14 02:38:39
Started by user : oracle
Last Reload : 2008-03-14 02:38:39
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 45
Size of XML files pending upload(MB) : 2.62
Available disk space on upload filesystem : 87.60%
Agent is Running and Ready
Any ideas ?
Thanks,
Paul

Thomas, all looks ok on that tests.
Hans, do you think that the initial version of Oracle Grid Control needs to be patched because there are bugs in here ?
After I restarted the agent OMS Version is "Unknown" (OMS Version : Unknown) ... but immediately after the agent installation was known ... why ? any ideas? Could anybody tell me which is the log file for the agent?
Thanks,
Paul

Oracle Grid Agent Installation

Can I install Oracle Grid Agent 10.2.0.5.0 on IBM Itaniam 64bit machine with Linux 4.7 Cent OS

You can, and you can get it working, but remember that CentOS is not certified by Oracle, so you might run into trouble, but it will work ... on the other hand, you can run Oracle products on many system that are not certified, but the result might not be as good as if you would have a Oracle certified system, like free Oracle linux ...

Oracle documentation for Installation for Oracle Grid Infrastructure

Hi
I want to install 11g Release 2 "Oracle Grid Infrastrucure" on Aix system without Cluster/RAC option. The requirement is to configure ASM on an Standalone system without any Cluster and RAC. Is there any documentation available for this installation.
I have already checked the below link which provide information on Installation for Oracle Grid Infrastructure for a Cluster.
http://download.oracle.com/docs/cd/E11882_01/install.112/e10814/toc.htm
Please let know if there is any documentation for Installation for Oracle Grid Infrastructure for a standalone system.

Hi there. Well, the installation of Grid Infrastructure would ask you that what kind of installation you want to do, single instance or cluster? If you would choose single instance installation, it would not be much different from doing any other oracle installation. The key factor to do it and why its mandatory is because from 11.2 onwards, ASM can't be managed from DBCA but from its own tool only, ASMCA and that runs from Grid Home. So I don't think that not finding the docs should be a show stopper for you. I haven't done it on AIX so I am not sure that I can be of some help about it. I have done it on OEL 5 and it didn't throw any issues for me.
HTH
Aman....

Oracle 10gR2 Grid Management Agents installation issues

I have downloaded the Grid Management Agent from the oracle downloads website and installed on one of my AIX servers but after running through the installation the server does not show up in Grid Control.
Our Grid Control is running on RH4 server.
The platform of host server i am attempting to install the agent on is AIX5.3
I unzipped the following file
AIX_Grid_Control_agent_download_10_2_0_3_0.zip
I ran the installer and it all seemed to work ok
I have checked the dbconsole is running,EMCTL STATUS DBCONSOLE
I have checked the agent is running EMCTL STATUS AGENT
I have checked the listener is running LSNRCTL STATUS
I have checked the database is up by CONNECT / AS SYSDBA
I can conect to the http://myserver:1158/em
The local enterprise manager works fine however as i say the server does not appear in my Grid Control console.
I have restarted al the afforementioned listeners, agents etc.
Can anyone give me a pointer as to why after what would appear to be a succesfull install the serevr does not appear in Grid Control console.

yingkuan again thanks for the reply
I have read the installation readme and it says i have these installation methods
1 - Methods for mass deployment
2 - Using Oracle Universal Installer (OUI) to install agent
3 - silent installation
4 - NFS Mounted agent installation
I am running the runInstaller method (2) from the list above
Like i say i basically downloaded the following file from Oracle Downloads:
AIX_Grid_Control_agent_download_10_2_0_3_0.zip
I FTP'd the file from my PC to the server i wish to be the agent.
I then ran the runInstaller from AIX_Grid_Control_agent_download_10_2_0_3_0/aix/agent/install.
However at no point was i asked to insert the OMS server or any other details.
I have read a couple of different readme files and followed what i believe to be the installation instructions. Could you or anyone else possibly throw any light on what i am doing wrong.
again any assitance greatly appreciated

Reinstall grid control agent, db agent, weblogic agent

Hi,
I installed oem 11g in testing environment. However, I reinstall the oms due to wrong operation. For agent side, I installed grid control agent, db agent, weblogic agent. Any official document can follow to re-install the agent...or I just re-install it by using "fresh installation". Many thx!
Gil

if you want just to reinstall the agent you could delete the $AGENT_HOME directory and cleanup the file "inventory.xml" ($ORACLE_BASE/oraInventory/ContentsXML).
But you could use the GUI of the installer as well and delete the agent the "official" way...
If want to reinstall the OMS, GC repository and/or the WLS as well I would suggest that you take a look into the documentation
under http://download.oracle.com/docs/cd/E11857_01/index.htm
HTH

Error while creating physical standby database using Oracle Grid 10.2.0.5

Hi All,
I am setting up data guard using oracle grid.
Primary database version: - 10.2.0.4
Standby database version: - 10.2.0.4
Primary OS Red Hat Enterprise Linux AS release 4 (Nahant Update 8)2.6.9
Standby OS Red Hat Enterprise Linux AS release 4 (Nahant Update 8)2.6.9
I am creating physical standby database using EM. But it is getting failed with error message in sqlnet.ora file
Fatal NI connect error 12533, connecting to:
(DESCRIPTION=(ADDRESS_LIST=)(CONNECT_DATA=(SERVICE_NAME=INPRDSB_XPT)(SERVER=dedicated)(CID=(PROGRAM=oracle)(HOST=indb50.oii.com)(USER=oracle))))
VERSION INFORMATION:
        TNS for Linux: Version 10.2.0.4.0 - Production
        TCP/IP NT Protocol Adapter for Linux: Version 10.2.0.4.0 - Production
Time: 17-AUG-2010 02:40:07
Tracing not turned on.
Tns error struct:
    ns main err code: 12533
    TNS-12533: TNS:illegal ADDRESS parameters
    ns secondary err code: 0
    nt main err code: 0
    nt secondary err code: 0As we can see, address_list is empty.
Can anyone suggest what could be the reason behind this?

Dear user13295317,
Here is the error explanation;
Oracle Error :: TNS-12533
TNS:illegal ADDRESS parameters
Cause
An illegal set of protocol adapter parameters was specified.
In some cases, this error is returned when a connection cannot be made to the protocol transport.
Action
Verify that the destination can be reached using the specified protocol.
Check the parameters within the ADDRESS section of TNSNAMES.ORA.
Legal ADDRESS parameter formats may be found in the Oracle operating system specific documentation for your platform.
Protocols that resolve names at the transport layer (such as DECnet object names) are vulnerable to this error if not properly configured or names are misspelled.Hope That Helps.
Ogan

Root.sh failed at second node OUL 6.3 Oracle GRID 11.2.0.3

Hi, im installing a two node cluster mounted on Oracle Linux 6.3 with Oracle DB 11.2.0.3, the installation went smooth up until the execution of the root.sh script on the second node.
THe script return this final lines:
CRS-4402: The CSS daemon was started in exclusive mode but found an active CSS daemon on node nodo1, number 1, and is terminating
An active cluster was found during exclusive startup, restarting to join the cluster
Start of resource "ora.crsd" failed
CRS-2800: Cannot start resource 'ora.asm' as it is already in the INTERMEDIATE state on server 'nodo2'
CRS-4000: Command Start failed, or completed with errors.
Failed to start Oracle Grid Infrastructure stack
Failed to start Cluster Ready Services at /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 1286.
/u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
In $GRID_HOME/log/node2/alertnode.log It appears to be a Cluster Time Synchronization Service issue, (i didn't synchronyze the nodes..) however the CTSS is running in observer mode, wich i believe it shouldn't affect the installation process. After that i lost it...there's an entry CRS-5018 indicating that an unused HAIP route was removed... and then, out of the blue: CRS-5818:Aborted command 'start' for resource 'ora.asm'. Some clarification will be deeply apreciated.
Here's the complete log:
2013-04-01 13:39:35.358
[client(12163)]CRS-2101:The OLR was formatted using version 3.
2013-04-01 19:40:19.597
[ohasd(12338)]CRS-2112:The OLR service started on node nodo2.
2013-04-01 19:40:19.657
[ohasd(12338)]CRS-1301:Oracle High Availability Service started on node nodo2.
[client(12526)]CRS-10001:01-Apr-13 13:41 ACFS-9459: ADVM/ACFS is not supported on this OS version: '2.6.39-400.17.2.el6uek.i686'
[client(12528)]CRS-10001:01-Apr-13 13:41 ACFS-9201: Not Supported
[client(12603)]CRS-10001:01-Apr-13 13:41 ACFS-9459: ADVM/ACFS is not supported on this OS version: '2.6.39-400.17.2.el6uek.i686'
2013-04-01 19:41:17.509
[ohasd(12338)]CRS-2302:Cannot get GPnP profile. Error CLSGPNP_NO_DAEMON (GPNPD daemon is not running).
2013-04-01 19:41:17.618
[gpnpd(12695)]CRS-2328:GPNPD started on node nodo2.
2013-04-01 19:41:21.363
[cssd(12755)]CRS-1713:CSSD daemon is started in exclusive mode
2013-04-01 19:41:23.194
[ohasd(12338)]CRS-2767:Resource state recovery not attempted for 'ora.diskmon' as its target state is OFFLINE
2013-04-01 19:41:56.144
[cssd(12755)]CRS-1707:Lease acquisition for node nodo2 number 2 completed
2013-04-01 19:41:57.545
[cssd(12755)]CRS-1605:CSSD voting file is online: /dev/oracleasm/disks/ASM_DISK_1; details in /u01/app/11.2.0/grid/log/nodo2/cssd/ocssd.log.
[cssd(12755)]CRS-1636:The CSS daemon was started in exclusive mode but found an active CSS daemon on node nodo1 and is terminating; details at (:CSSNM00006:) in /u01/app/11.2.0/grid/log/nodo2/cssd/ocssd.log
2013-04-01 19:41:58.549
[ohasd(12338)]CRS-2765:Resource 'ora.cssdmonitor' has failed on server 'nodo2'.
2013-04-01 19:42:10.025
[gpnpd(12695)]CRS-2329:GPNPD on node nodo2 shutdown.
2013-04-01 19:42:11.407
[mdnsd(12685)]CRS-5602:mDNS service stopping by request.
2013-04-01 19:42:29.642
[gpnpd(12947)]CRS-2328:GPNPD started on node nodo2.
2013-04-01 19:42:33.241
[cssd(13012)]CRS-1713:CSSD daemon is started in clustered mode
2013-04-01 19:42:35.104
[ohasd(12338)]CRS-2767:Resource state recovery not attempted for 'ora.diskmon' as its target state is OFFLINE
2013-04-01 19:42:44.065
[cssd(13012)]CRS-1707:Lease acquisition for node nodo2 number 2 completed
2013-04-01 19:42:45.484
[cssd(13012)]CRS-1605:CSSD voting file is online: /dev/oracleasm/disks/ASM_DISK_1; details in /u01/app/11.2.0/grid/log/nodo2/cssd/ocssd.log.
2013-04-01 19:42:52.138
[cssd(13012)]CRS-1601:CSSD Reconfiguration complete. Active nodes are nodo1 nodo2 .
2013-04-01 19:42:55.081
[ctssd(13076)]CRS-2403:The Cluster Time Synchronization Service on host nodo2 is in observer mode.
2013-04-01 19:42:55.581
[ctssd(13076)]CRS-2401:The Cluster Time Synchronization Service started on host nodo2.
2013-04-01 19:42:55.581
[ctssd(13076)]CRS-2407:The new Cluster Time Synchronization Service reference node is host nodo1.
2013-04-01 19:43:08.875
[ctssd(13076)]CRS-2412:The Cluster Time Synchronization Service detects that the local time is significantly different from the mean cluster time. Details in /u01/app/11.2.0/grid/log/nodo2/ctssd/octssd.log.
2013-04-01 19:43:08.876
[ctssd(13076)]CRS-2409:The clock on host nodo2 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
2013-04-01 19:43:13.565
[u01/app/11.2.0/grid/bin/orarootagent.bin(13064)]CRS-5018:(:CLSN00037:) Removed unused HAIP route: 169.254.0.0 / 255.255.0.0 / 0.0.0.0 / eth0
2013-04-01 19:53:09.800
[u01/app/11.2.0/grid/bin/oraagent.bin(12922)]CRS-5818:Aborted command 'start' for resource 'ora.asm'. Details at (:CRSAGF00113:) {0:0:223} in /u01/app/11.2.0/grid/log/nodo2/agent/ohasd/oraagent_oracle/oraagent_oracle.log.
2013-04-01 19:53:11.827
[ohasd(12338)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.asm'. Details at (:CRSPE00111:) {0:0:223} in /u01/app/11.2.0/grid/log/nodo2/ohasd/ohasd.log.
2013-04-01 19:53:12.779
[u01/app/11.2.0/grid/bin/oraagent.bin(12922)]CRS-5019:All OCR locations are on ASM disk groups [DATA], and none of these disk groups are mounted. Details are at "(:CLSN00100:)" in "/u01/app/11.2.0/grid/log/nodo2/agent/ohasd/oraagent_oracle/oraagent_oracle.log".
2013-04-01 19:53:13.892
[u01/app/11.2.0/grid/bin/oraagent.bin(12922)]CRS-5019:All OCR locations are on ASM disk groups [DATA], and none of these disk groups are mounted. Details are at "(:CLSN00100:)" in "/u01/app/11.2.0/grid/log/nodo2/agent/ohasd/oraagent_oracle/oraagent_oracle.log".
2013-04-01 19:53:43.877
[u01/app/11.2.0/grid/bin/oraagent.bin(12922)]CRS-5019:All OCR locations are on ASM disk groups [DATA], and none of these disk groups are mounted. Details are at "(:CLSN00100:)" in "/u01/app/11.2.0/grid/log/nodo2/agent/ohasd/oraagent_oracle/oraagent_oracle.log".
2013-04-01 19:54:13.891
[u01/app/11.2.0/grid/bin/oraagent.bin(12922)]CRS-5019:All OCR locations are on ASM disk groups [DATA], and none of these disk groups are mounted. Details are at "(:CLSN00100:)" in "/u01/app/11.2.0/grid/log/nodo2/agent/ohasd/oraagent_oracle/oraagent_oracle.log".
2013-04-01 19:54:43.906
[u01/app/11.2.0/grid/bin/oraagent.bin(12922)]CRS-5019:All OCR locations are on ASM disk groups [DATA], and none of these disk groups are mounted. Details are at "(:CLSN00100:)" in "/u01/app/11.2.0/grid/log/nodo2/agent/ohasd/oraagent_oracle/oraagent_oracle.log".
2013-04-01 19:55:13.914
[u01/app/11.2.0/grid/bin/oraagent.bin(12922)]CRS-5019:All OCR locations are on ASM disk groups [DATA], and none of these disk groups are mounted. Details are at "(:CLSN00100:)" in "/u01/app/11.2.0/grid/log/nodo2/agent/ohasd/oraagent_oracle/oraagent_oracle.log".
2013-04-01 19:55:43.918
[u01/app/11.2.0/grid/bin/oraagent.bin(12922)]CRS-5019:All OCR locations are on ASM disk groups [DATA], and none of these disk groups are mounted. Details are at "(:CLSN00100:)" in "/u01/app/11.2.0/grid/log/nodo2/agent/ohasd/oraagent_oracle/oraagent_oracle.log".
2013-04-01 19:56:13.922
[u01/app/11.2.0/grid/bin/oraagent.bin(12922)]CRS-5019:All OCR locations are on ASM disk groups [DATA], and none of these disk groups are mounted. Details are at "(:CLSN00100:)" in "/u01/app/11.2.0/grid/log/nodo2/agent/ohasd/oraagent_oracle/oraagent_oracle.log".
2013-04-01 19:56:53.209
[crsd(13741)]CRS-1012:The OCR service started on node nodo2.
2013-04-01 20:07:01.128
[crsd(13741)]CRS-0810:Cluster Ready Service aborted due to failure to communicate with Event Management Service with error [1]. Details at (:CRSD00120:) in /u01/app/11.2.0/grid/log/nodo2/crsd/crsd.log.
2013-04-01 20:07:01.278
[ohasd(12338)]CRS-2765:Resource 'ora.crsd' has failed on server 'nodo2'.
2013-04-01 20:07:08.689
[crsd(15248)]CRS-1012:The OCR service started on node nodo2.
2013-04-01 20:13:10.138
[ctssd(13076)]CRS-2412:The Cluster Time Synchronization Service detects that the local time is significantly different from the mean cluster time. Details in /u01/app/11.2.0/grid/log/nodo2/ctssd/octssd.log.
2013-04-01 20:17:13.024
[crsd(15248)]CRS-0810:Cluster Ready Service aborted due to failure to communicate with Event Management Service with error [1]. Details at (:CRSD00120:) in /u01/app/11.2.0/grid/log/nodo2/crsd/crsd.log.
2013-04-01 20:17:13.171
[ohasd(12338)]CRS-2765:Resource 'ora.crsd' has failed on server 'nodo2'.
2013-04-01 20:17:20.826
[crsd(16746)]CRS-1012:The OCR service started on node nodo2.
2013-04-01 20:27:25.020
[crsd(16746)]CRS-0810:Cluster Ready Service aborted due to failure to communicate with Event Management Service with error [1]. Details at (:CRSD00120:) in /u01/app/11.2.0/grid/log/nodo2/crsd/crsd.log.
2013-04-01 20:27:25.176
[ohasd(12338)]CRS-2765:Resource 'ora.crsd' has failed on server 'nodo2'.
2013-04-01 20:27:31.591
[crsd(18266)]CRS-1012:The OCR service started on node nodo2.
2013-04-01 20:37:35.668
[crsd(18266)]CRS-0810:Cluster Ready Service aborted due to failure to communicate with Event Management Service with error [1]. Details at (:CRSD00120:) in /u01/app/11.2.0/grid/log/nodo2/crsd/crsd.log.
2013-04-01 20:37:35.808
[ohasd(12338)]CRS-2765:Resource 'ora.crsd' has failed on server 'nodo2'.
2013-04-01 20:37:43.209
[crsd(19762)]CRS-1012:The OCR service started on node nodo2.
2013-04-01 20:43:11.160
[ctssd(13076)]CRS-2412:The Cluster Time Synchronization Service detects that the local time is significantly different from the mean cluster time. Details in /u01/app/11.2.0/grid/log/nodo2/ctssd/octssd.log.
2013-04-01 20:47:47.487
[crsd(19762)]CRS-0810:Cluster Ready Service aborted due to failure to communicate with Event Management Service with error [1]. Details at (:CRSD00120:) in /u01/app/11.2.0/grid/log/nodo2/crsd/crsd.log.
2013-04-01 20:47:47.637
[ohasd(12338)]CRS-2765:Resource 'ora.crsd' has failed on server 'nodo2'.
2013-04-01 20:47:55.086
[crsd(21242)]CRS-1012:The OCR service started on node nodo2.
2013-04-01 20:57:59.343
[crsd(21242)]CRS-0810:Cluster Ready Service aborted due to failure to communicate with Event Management Service with error [1]. Details at (:CRSD00120:) in /u01/app/11.2.0/grid/log/nodo2/crsd/crsd.log.
2013-04-01 20:57:59.492
[ohasd(12338)]CRS-2765:Resource 'ora.crsd' has failed on server 'nodo2'.
2013-04-01 20:58:06.996
[crsd(22744)]CRS-1012:The OCR service started on node nodo2.
2013-04-01 21:08:11.046
[crsd(22744)]CRS-0810:Cluster Ready Service aborted due to failure to communicate with Event Management Service with error [1]. Details at (:CRSD00120:) in /u01/app/11.2.0/grid/log/nodo2/crsd/crsd.log.
2013-04-01 21:08:11.192
[ohasd(12338)]CRS-2765:Resource 'ora.crsd' has failed on server 'nodo2'.
2013-04-01 21:08:18.726
[crsd(24260)]CRS-1012:The OCR service started on node nodo2.
2013-04-01 21:13:12.000
[ctssd(13076)]CRS-2412:The Cluster Time Synchronization Service detects that the local time is significantly different from the mean cluster time. Details in /u01/app/11.2.0/grid/log/nodo2/ctssd/octssd.log.
2013-04-01 21:18:22.262
[crsd(24260)]CRS-0810:Cluster Ready Service aborted due to failure to communicate with Event Management Service with error [1]. Details at (:CRSD00120:) in /u01/app/11.2.0/grid/log/nodo2/crsd/crsd.log.
2013-04-01 21:18:22.411
[ohasd(12338)]CRS-2765:Resource 'ora.crsd' has failed on server 'nodo2'.
2013-04-01 21:18:29.927
[crsd(25759)]CRS-1012:The OCR service started on node nodo2.
2013-04-01 21:28:34.467
[crsd(25759)]CRS-0810:Cluster Ready Service aborted due to failure to communicate with Event Management Service with error [1]. Details at (:CRSD00120:) in /u01/app/11.2.0/grid/log/nodo2/crsd/crsd.log.
2013-04-01 21:28:34.616
[ohasd(12338)]CRS-2765:Resource 'ora.crsd' has failed on server 'nodo2'.
2013-04-01 21:28:41.990
[crsd(27291)]CRS-1012:The OCR service started on node nodo2.
2013-04-01 21:38:45.012
[crsd(27291)]CRS-0810:Cluster Ready Service aborted due to failure to communicate with Event Management Service with error [1]. Details at (:CRSD00120:) in /u01/app/11.2.0/grid/log/nodo2/crsd/crsd.log.
2013-04-01 21:38:45.160
[ohasd(12338)]CRS-2765:Resource 'ora.crsd' has failed on server 'nodo2'.
2013-04-01 21:38:52.790
[crsd(28784)]CRS-1012:The OCR service started on node nodo2.
2013-04-01 21:43:12.378
[ctssd(13076)]CRS-2412:The Cluster Time Synchronization Service detects that the local time is significantly different from the mean cluster time. Details in /u01/app/11.2.0/grid/log/nodo2/ctssd/octssd.log.
2013-04-01 21:48:56.285
[crsd(28784)]CRS-0810:Cluster Ready Service aborted due to failure to communicate with Event Management Service with error [1]. Details at (:CRSD00120:) in /u01/app/11.2.0/grid/log/nodo2/crsd/crsd.log.
2013-04-01 21:48:56.435
[ohasd(12338)]CRS-2765:Resource 'ora.crsd' has failed on server 'nodo2'.
2013-04-01 21:49:04.421
[crsd(30272)]CRS-1012:The OCR service started on node nodo2.
2013-04-01 21:59:08.183
[crsd(30272)]CRS-0810:Cluster Ready Service aborted due to failure to communicate with Event Management Service with error [1]. Details at (:CRSD00120:) in /u01/app/11.2.0/grid/log/nodo2/crsd/crsd.log.
2013-04-01 21:59:08.318
[ohasd(12338)]CRS-2765:Resource 'ora.crsd' has failed on server 'nodo2'.
2013-04-01 21:59:15.860
[crsd(31772)]CRS-1012:The OCR service started on node nodo2.

Hi santysharma, thanks for the reply, i have two ethernet interfaces: eth0 (public network 192.168.1.0) and eth1 (private network 10.5.3.0), there is no device using that ip range, here's the output of route command:
(Sorry for the alignment, i tried to tab it but the editor trims it again)
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
default 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
private * 255.255.255.0 U 0 0 0 eth1
link-local * 255.255.0.0 U 1002 0 0 eth0
link-local * 255.255.0.0 U 1003 0 0 eth1
public * 255.255.255.0 U 0 0 0 eth0
And the /etc/hosts file
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
10.5.3.1 nodo1.cluster nodo1
10.5.3.2 nodo2.cluster nodo2
192.168.1.13 cluster-scan
192.168.1.14 nodo1-vip
192.168.1.15 nodo2-vip
And the ifconfig -a
eth0 Link encap:Ethernet HWaddr C8:3A:35:D9:C6:2B
inet addr:192.168.1.12 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::ca3a:35ff:fed9:c62b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:34708 errors:0 dropped:18 overruns:0 frame:0
TX packets:24693 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:48545969 (46.2 MiB) TX bytes:1994381 (1.9 MiB)
eth1 Link encap:Ethernet HWaddr 00:0D:87:D0:A3:8E
inet addr:10.5.3.2 Bcast:10.5.3.255 Mask:255.255.255.0
inet6 addr: fe80::20d:87ff:fed0:a38e/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:44 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:5344 (5.2 KiB)
Interrupt:23 Base address:0x6000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:20 errors:0 dropped:0 overruns:0 frame:0
TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1320 (1.2 KiB) TX bytes:1320 (1.2 KiB)
Now that i'm thinking i've read somewhere that ipv6 was no supported...yet there's no relation with the 169.254.x.x ip range.

Oracle Grid Siebel Agent Documentation

Similar Messages

Maybe you are looking for