ORACLE_HOME Directory Structure and Content description

Can anyone show me the Oracle document or website which lists the
ORACLE_HOME Directory Structure and Content description for windows platform.
Oracle 10g R2.
Thank you,
Smith

http://download.oracle.com/docs/cd/B19306_01/install.102/b14316/ofa.htm#CBBEDHEB

Similar Messages

Directory structure and files in Oracle Application server 10g and 11g

Hi all,
I am doing a lab migration from 10g to 11g based on the use of JAXB. There were some directory structures used in 10g to store the JAXB jar files and some other custom jar files. I want to know the equivalent folder structures in SOA 11g server. The 10g server directories are mentioned below:-
1.<OracleAS_Home>\webservices\lib.
2. server.xml located at <OracleAS_Home>\j2ee\home\config in 10g. Where can I find the equivalent file to "server.xml" in 11g server?
3. <OracleAS_Home>\bpel\system\classes\com\oracle\bpel\xml\util.
4. <OracleAS_Home> \bpel\system\classes.

Here are the equivalents as per best of my knowledge:
1. <WebLogic Home>\server\lib
For example, D:\Middleware\wls1036\wlserver_10.3\server\lib
2. config,xml located at <Domain_Home>\config\
For example, D:\Middleware\wls1036\user_projects\domains\ArunBaseDomain1036\config\config.xml
3. It should be the same as 10g (instead of OracleAS_Home, it will be ORACLE_Home) if you install the BPEL product. Since, I have not installed BPEL/SOA, I am not very sure.
4. It should be the same as 10g (instead of OracleAS_Home, it will be ORACLE_Home) if you installed the BPEL product.
Also, I would recommend that you consider using ORACLE Smart Upgrade (JDeveloper component) to help you with the upgrade process. It exactly points out these mappings of file/directory structures AND the necessary configuration changes as well.
If you are requirement, is only about making the library jars available to your application, then consider reading the below discussion.
Re: XIncludeAwareParserConfiguration cannot be cast to XMLParserConfiguration
Arun

Iphoto directory structure and multiple copies

I want to manage the directory structure of my photos because I use them with applications and want to put them where I want to. Thus, I never cared for iPhoto 08 and how it organized the directory structure how it wanted to.
Additionally, it seems iPhoto 08 kept at least 1, sometimes 2 copies of the files. I'd rather have it make a backup only when the original got modified so it doesn't chew up twice as much disk space as needed.
Is there any change in iPhoto 09 for these issues?
I'm currently using Picasa, which I was thrilled when they released the mac version, and it pretty much works the way I want to work. But I'd love to try iPhoto again if its changed.

I want to manage the directory structure of my photos because I use them with applications and want to put them where I want to. Thus, I never cared for iPhoto 08 and how it organized the directory structure how it wanted to.
Then iPhoto is not for you - it is a photo manager and you want a file manager - iPhoto's speed and power comes from being an SQL database and as such there are no user serviceable parts in its library - it depends on the content and structure of the library and if you modify it then it is lost and can no longer operate
Additionally, it seems iPhoto 08 kept at least 1, sometimes 2 copies of the files. I'd rather have it make a backup only when the original got modified so it doesn't chew up twice as much disk space as needed.
iPhoto always keeps the original photo as imported unchanged and make a very small display thumbnail of each photo - if you make any modifications of any sort to a photo then it creates a modified version - each of these is different and there are no backups of photos created by iPhoto - you must do that yourself
Is there any change in iPhoto 09 for these issues?
Issues? There is no change in the way iPhoto works - they are not issues but intentional design that work well and provide great poser to the user for managing and finding photos
I'm currently using Picasa, which I was thrilled when they released the mac version, and it pretty much works the way I want to work.
Glad you found a program that meets your needs - iPhoto does not
LN

How to install an entire directory structure and files with the LabVIEW installer

I think I may be missing something on how to do this - preserve a file directory structure in the LabVIEW build process.
Is there an easy way to distribute an entire directory structure (multiple directory levels/text files) and have the LabVIEW build process properly preserve and install them? I included a directory in my build specification but it completely flattened the file structure and then so when the installer builds it, the resulting structure in the /data directory is flattened as well. I'd prefer not to go through each file (~100) and setup a specific target location. Is there an easy way to preserve the file structure in the build process/installer process that I am missing (maybe a check box that I didn't see or an option setting somewhere)?
-DC

Hi DC
Sorry for the delay in responding to your question.
You should be able to do this using a 'Source Distribution' as described below:
- Right click on 'Build Specifications' and select 'New' - 'Source Distribution'
- Provide a name
- Add your files to 'Always included' under 'Source Files'
- Under 'Destinations' select 'Preserve disk hierarchy' and ensure that 'Directory' is selected as the 'Destination type'
When building an installer your can then choose to include your source distribution and it will be installed to a location of your choosing.
Hope this helps.
Kind Regards
Chris | Applications Engineer NIUK

Hana db filesystem directory structure and process command line

Hi experts,
Could someone provide please actual directory structure of Hana db filesystem?
Generally speaking, I need to model some Hana db(of 1.0, 1.5 versions) entities. Among them:
Schemas
Data files
Log files
Important configuration files
Database parameters(guess found in config files and command line)
Database version
The question is where i can find such information having access to filesystem?
One another question is how common Hana db commandline looks like?
Does it have one process or several?
It would be perfect if someone give some ps -aef command result grepped with relevant Hana Db processes
Thanks,
Eugene
Edited by: Eugene Kondrashev on Dec 28, 2011 12:51 PM

Eugene Kondrashev wrote:
> * What are the processes relevant to Hana Db?
This is still changing pretty much ...
Anyhow, just check the running services in HANA studio (landscape tab) and you have all the process at hand.
> * What is the signature of starting command?
What is that supposed to mean?
> * How can I identify running Hana Db instance on a host having shell access?
How about the HDB command?
SUSE Linux Enterprise Server 11 (x86_64)
/usr/sap/HAN/HDB00> HDB help
Usage: /usr/sap/HAN/HDB00/HDB { start|stop|reconf|restart|version|info|proc|admin|kill|kill-<sig>|term }
kill or kill-9 should never be used in productive environment!
/usr/sap/HAN/HDB00> HDB info
USER       PID PPID %CPU    VSZ   RSS COMMAND
hanadm   14682 14677 0.0 85580 2180 sshd: hanadm@pts/0
hanadm   14683 14682 3.3 16768 2980 \_ -bash
hanadm   14756 14683 18.1 13652 1680      \_ /bin/sh /usr/sap/HAN/HDB00/HDB info
hanadm   14782 14756 0.0   6620   892          \_ ps fx -U hanadm -o user,pid,ppid,pcpu,vsz,rss,args
hanadm   31638     1 0.0 42624 1820 sapstart pf=/usr/sap/HAN/SYS/profile/HAN_HDB00_vml3012
hanadm   31645 31638 0.0 528216 151400 \_ /usr/sap/HAN/HDB00/vml3012/trace/HDB.sapHAN_HDB00 -d -nw -f /usr/sap/HAN/HDB00/vml3012/daemon.ini pf=/usr/sap/HAN/SYS/profi
hanadm   31665 31645 0.5 5001972 1002844      \_ hdbnameserver
hanadm   31723 31645 0.0 4367024 244336      \_ hdbpreprocessor
hanadm   31744 31645 1.9 5664496 1779448      \_ hdbindexserver
hanadm   31752 31645 3.6 7197924 3359440      \_ hdbstatisticsserver
hanadm   31759 31645 0.6 5289164 1507684      \_ hdbxsengine
hanadm   32017 31645 0.0 429188 124344      \_ sapwebdisp_hdb pf=/usr/sap/HAN/HDB00/vml3012/wdisp/sapwebdisp.pfl -f /usr/sap/HAN/HDB00/vml3012/trace/dev_webdisp
hanadm   31527     1 0.0 292676 110380 /usr/sap/HAN/HDB00/exe/sapstartsrv pf=/usr/sap/HAN/SYS/profile/HAN_HDB00_vml3012 -D
> * Does Hana DB started with SAP start profile? If so, could someone point me to the example of such a profile?
?? seriously... take a guess
regards,
Lars

Best approach to create Package Structure and .content.xml

I am aware that we have a schem.xsd for generic package content.xml creation and neither do vault.xml and other associated xml files in the META-INF folder of the package.
I want to know if there is some recommended approach to build the package and xml files, specifically content.xml programmatically on the file system. I know that we can use package manager (API not the GUI/screen) but that comes into picture when the folder structure and xmls files are created. I am interested to know a standard procedure of acceptable procedures to build the structure. I have seen folks use JDom/SAX etc to build this and even velocity to try it out using templates but that looks largely as a workaround. Can anyone help with some inputs on this?

We've been successful at using ANT as a Build tool to run XSLT 2.0 using the Saxon XSL processor. We have processed both CSV and XML files into packages. This started out pretty simply, but grew more complex than initially thought. There are a lot of subtlties that can be overlooked in the package format. Also if your filters aren't right it will happily delete a lot of data. Thankfully it appears uninstalling can recover these most times, but I'd recommend testing packages on a throw away instance.
I've posted an example Ant + XSL that goes from CSV > XML > Many XML Files > CRX Package Zip: https://github.com/odu/crx-package-xsl-example. There is also some info on some of the complexities of a package mentioned on that page that may be helpful, even if Ant / XSL isn't your route.
Can you share more about your use for building a package, what format is the source data in, etc? This example is really only useful for batch loading.

Copy Z table structure and contents

Hi all,
I am looking at a quick and easy way to copy a Z Table structure and its contents from
one system to another completely different system on different servers and locations.
Is this possible?
Thanks

Yes its possible Try to transport the request
The request should contain your required objects
Contact your basis admin he will do the transport the request from OS level.
Then Go and change the SID in the table TADIR
And Give the object name and change the SID of the object then it allows you to change as per the new requirement.
Hope This will help you.
Regards,
Madan Mohan.

User accounts, directory structures and selective access privileges

Bought a new MacBook Pro back in April and only now am I getting down to using it. I was thinking of creating the following user accounts in the hope of creating a scheme that allows selective access to certain folders:
Root -a super user account
Admin - I don’t think I should be logged in as the administrator all the time
Jai Gill - my main account with all my work files including client information that is organised in a Workflow folder containing a Projects folder and a Clients folder (within which, each of my clients has a folder)
Show Time - a secure Simple Finder type account for when I am running a client specific presentation or workshop to ensure all data for other clients is kept secure and away from prying eyes.
When using the Show Time account, I would like to set it up so that only those files relating to the client in question are available for use. For instance, if I am running a workshop for Client G, I only want the folder for Client G available for use in this account and not any other clients. A few hours or days later, this could change to Client B or F or J etc so I need a way to easily secure the current client’s data and switch over to the other client’s data i.e., put away work and pull up new work.
Would it be possible to create a scheme using aliases placed in Show Time’s Documents folder pointing at a client folder in my documents folder to allow this to happen? Would I have to create a group with the right access privileges to enable this to happen? Or is there an alternative method based on using the Shared files folder and some sort of script or application to create a duplicate of a client folder and use a scheme to synchronise it with the original client folder?
Is this possible in Mac OSX? Any thoughts? Ideas? Applications/utilities that already enable this to happen?
MacBook Pro Mac OS X (10.4.9)

Hi Kiraly
I cracked it today. Took a couple of hours to figure out some idiosyncrasy but I'm now set.
Here's what I did:
1. Got a copies of Sharepoint, Workgroup Manager and ChronoSync.
2. Logged into the MacBook Pro as myself, went into System Preferences and used the normal approach to set up an account for a user called Show Time
3. Using Workgroup Manager, created an addition workgroup called macshow
4. Made myself and Show Time members of macshow
5. Attached the MBP to my G5 using my 2gen iPod's FireWire cable and cranked it up in target disk mode
6. Using ChronoSync, did a 'bi-directional' synchronisation of my Workflow folder into a location in the MBP's Shared folder (going to do this all the time)
7. Shut down, detached then restarted the MBP and logged on as myself.
8. Located the Workflow folder in the Shared folder and by getting information, set that folder and all it's contents to be owned by me but accessible and R/W for the group macshow
9. Went two levels into the Workflow folder [Workflow/4 Delivery/Client T] and using SharePoint, made the folder Client T accessible to the group macshow.
10. Logged in as Show Time and accessed the Shared folder to find that my scheme had worked and I had access to the folder for Client T and all it's contents.
11. Logged out and went back in under my ID and now using System Preferences, crippled the Show Time account down to Simple Finder with access limited to just a handful of applications like KeyNote, Word, Excel, Powerpoint and Safari.
12. Went back in as Show Time and it went into Simple Finder and thereafter, everything works great. Workflow showed up as did the folder for Client T plus all its contents. Opened a few documents and presentations and they wrked great.
New learning points for me:
1. I had to log out then log back in to make the access privileges stick when using the Show Time accounts
2. A number of locked Excel files prevented access privileges being set - had to locate and unlock each
3. Using both SharePoint and Workgroup Manager may be seem to be overkill but it works as these two applications helped in getting the groups sorted out as well as access to a specific folder.
The best part of the above scheme is that I can at anytime, using SharePoint, change the client folder being shared with the user Show Time through the use of the group macshow i.e., change Client T back to my group and then pick say Client J or any number of other client folders and assign them to the group macshow.
Thanks to you and the others who have posted on this and all other threads on this topic, I have sorted this out in one go.
Jai
PS in case you're wondering why it took me so long to get down to do it, it is something called client work. And may there be more of it too!
iMac G5 and MacBook Pro Mac OS X (10.4.10) MacUser since 1984

Get Idoc structure and contents from Shipment Number

Hi all,
We have a 3rd Party Logistics company who wants to send us back minimal shipment data to enable us to update our shipment details. They want to send us the shipment number, and vehicle information. My tests (and SAP's documentation) have indicated that in order to modify a shipment via the message type SHPADV, you need to have the complete Shipment Idoc structure filled in in order for the idoc to process successfully.
My client has indicated that they want to use IDoc processing to manage the shipment updates.
Does anyone know of a FM that can be used to fill the shipment Idoc structures if only a shipment number is filled in? Or do the structures have to be modified manually? For example, these is a function called 'IDOC_READ_COMPLETELY' which populates all the segment details if an Idoc number is entered. I want something similar, but for a document number, in this instance, a shipment number.
Cheers,
Steve

Roger,
Thanks for this suggestion. I chose to go down another path which I put up here for those who have this problem in the future.
I have passed the shipment number and just the fields that require modification into user exit EXIT_SAPLV55K_020, and recorded the passed in values into variables.
I then executed the <b>idoc_output_shpmnt</b> idoc, which, when the shipment number is passed in to the nast-objky field, reads the required shipment data and populates the idoc_data table with the segment details as per sending the document out. But the FM doesn't actually call the ALE layer, so I then loop through the idoc_data table, modifying the fields that need to change with the values I've saved in the variables, and passed the modified idoc_data tables back into the <b>idoc_input_shpmnt</b> FM. Worked a treat.
Cheers,
Steve

IPod folder structure and content doesn't match iTunes Library structure

My iTunes Library has the following folders:
Music
Podcasts
Audiobooks
As expected, the Podcasts folder contains podcasts I have subscribed to, and the Audiobooks folder contains Audiobooks I purchased. So far, so good.
However, in addition to CDs I imported, the Music folder also contains files originating from manual audio recordings I made via TotalRecorder.
This is confusing enough, but in the iPod the situation is even more confusing, i.e. everything comes under Music, which has the following subfolders (among others): Albums, Songs, Podcasts, Audiobooks.
The Podcasts and Audiobooks folders seem OK, but the Albums folder seems to contain not only the CDs, but also all the podcasts.
And the only place I can find my manual recordings is under Songs.
Any suggestions for bringing some order into this apparent chaos?
Ideally I would like to be able to create a new folder called, say, Recordings, in my iTunes Library, and I would like my top level folders in my iTunes Library to match those on the iPod.
Thank you in advance for any suggestions/comments.

Which model of iPod do you have? I have a 160GB Classic (this forum) which _does not_ show Podcasts under the Music folder, and apparently does not have an option to do so. However, I also have a 5th generation 30GB video iPod, which does show Podcasts under the Music folder. Straight away, you'll notice that different modles behave differently, so we need to know.
So, that's the first thing to sort out.
Then, on your manual recordings, did you add all the relevant artist information to the file (i.e. the MP3 tags) when you created them? If not, that will be why they only show up in songs, (but there may be another cause too!). You can fill in any missing information by highlighting the song and clicking on *File/Get Info* and adding the info then.
In the long term, the probably answer to your manual files is to give them their own genre and then search for them that way.

Standby Redo Log Files and Directory Structure in Standby Site

Hi Guru's
I just want to confirm, i know that if the Directory structure is different i need to mention these 2 parameter in pfile
on primary site:
DB_CONVERT_DATAFILE='standby','primary'
LOG_CONVERT_DATAFILE='standby','primary'
On secondary Site:
DB_CONVERT_DATAFILE='primary','standby'
LOG_CONVERT_DATAFILE='primary','standby'
But i want to confirm this wheather i need to issue the complete path of the directory in both the above paramtere:
like:
DB_CONVERT_DATAFILE='/u01/oracle/app/oracle/oradata/standby','/u01/oracle/app/oracle/oradata/primary'
LOG_CONVERT_DATAFILE='/u01/oracle/app/oracle/oradata/standby','/u01/oracle/app/oracle/oradata/primary'
Second Confusion:-
After transferring Redo Standby log files created on primary and taken to standby on the above mentioned directory structure and after restoring the backup of primary db alongwith the standby control file will not impact the physical standby redo log placed on the above mentioned location.
Thanks in advance for your help

Hello,
Regarding your 1st question, you need to provide the complete path and not just the directory name.
On the standby:
db_file_name_convert='<Full path of the datafiles on primary server>','<full path of the datafiles to be stored on the standby server>';
log_file_name_convert='<Full path of the redo logfiles on primary server>','<full path of the redo logfiles on the standby server>';
Second Confusion:-
After transferring Redo Standby log files created on primary and taken to standby on the above mentioned directory structure and after restoring the backup of primary db alongwith the standby control file will not impact the physical standby redo log placed on the above mentioned location.
How are you creating the standby database ? Using RMAN duplicate or through the restore/recovery options ?
You can create the standby redo logs later.
Regards,
Shivananda

Problem with package and directory structure

Please... I need help with a directory/package structure that I don't understand
why it is not working...
I want to create a custom login SWF which several other SWF movies will use in case they need some kind of login logic (in this case it is a login logic... but the problem doesn't have anything to do with that logic...)
I have created a FLA movie (LOGIN.FLA) and two helper classes (MAINLOGIN.AS and MAINLOGINEVENT.AS)... they are all under the same directory, for example:
c:\
     abc\
          def\
               ghi\
                    login
In LOGIN.FLA, I have included the source path, c:\abc (for example).
MAINLOGIN.AS and MAINLOGINEVENT.AS, have both a package like:
     package def.ghi.login
MainLogin class uses MainLoginEvent (it dispatches events of that type)... but I don't have to import anything as all 3files are in the same directory...
LOGIN.FLA has its class defined as def.ghi.login.MainLogin
And that's all... now comes the problem:
1. If I leave everything as described and try to publis LOGIN.FLA, it throws error 5001 ("The name of the package def.ghi.login.MainLoginEvent doesn't reflect....) for class MainLoginEvent... don't understand why... it is placed exactly as MainLogin and has the same package definition!
2. I have tried several other options, but when I get the SWF to get published, then, the problem comes when trying to use this SWF from another movie:
The way to publish LOGIN.FLA with no errors is: MAINLOGIN.AS and MAINLOGINEVENT.AS with empty package definition ("package" alone...) and LOGIN.FLA with class MainLogin (not def.ghi.login.MainLogin)... LOGIN.FLA doesn't have to include source path to c;\abc in this case. This way, I can publish LOGIN and get LOGIN.SWF.
The problem now is how to use this information from another Movieclip... I want to be able to use and receive events of type MainLoginEvent but can't (it gives error 5001 again, on MainLoginEvent, saying that the name of the package '' doesnt' reflect....)... If I include the path to c:\abc\def\ghi\login on the FLA, then it gives errors in MainLogin when trying to use a class of its library...
Basically, the problem here is that, the movie which wants to use the LOGIN.SWF, is in c:\abc\def, and it is including the source path c:\abc, so if I import def.ghi.login.*
it is when it throws error 5001 (I understand why, but I dont know how to fix it...), but if I dont import def.ghi.login.* then I can't use MainLogin nor MainLoginEvent...
What is the good way of doing this kind of structure... mainly it is creating a SWF, which can be used from other SWF's and which can dispatch events, which the container SWF will capture...
If anyone can please give me a hint... THANK YOU!

Hi kglad , I don't understand the first point... "don't use absolute paths"... I'm not using them (or I don't understand what you mean).
For the second one... the structure is like:
c:\
     abc\
          def\
               LOGINCONTAINER.FLA
               ghi\
                    login\
                         LOGIN.FLA
                         MAINLOGIN.AS
                         MAINLOGINEVENT.AS
In LOGIN.FLA, I include the source path c:\abc, so MAINLOGIN.AS and MAINLOGINEVENT.AS have a package of "def.ghi.login", and the class for LOGIN.FLA is "def.ghi.login.MainLogin"... when trying to publish LOGIN.FLA, Flash throws error 5001 for MAINLOGINEVENT...¿?
What I want to get is a SWF (LOGIN.SWF), which can be loaded from any other SWF (in this example, LOGINCONTAINER.SWF). LOGINCONTAINER.FLA, has a class path "c:\abc" (the same as the other LOGIN.FLA, because of the directory structure), and it has to be able to receive events of type MAINLOGINEVENT... that is why it has to do an import of "import def.ghi.login.*" (for example)
Any idea of why it is not working (or how to organize it correctly)?
Thank you

PC - Moving catalog and directory structure to a new HD

Having filled my internal HD with images, I went out and purchased a new and bigger external hard drive. I want to move my images to the new drive while preserving both my directory structure and catalog information. From what I can see of the "move" command in PS Elements, it moves selected images to a new directory, but that's not what I want to do. I probably have a hundred named folders and I would like to keep the images in folders of the same name on the new drive. I don't want to have to move one directory at a time. Copying through the file manager can obviously do this, but I don't know if it will preserve my tags, etc.
Is there a straightforward way to move files from one drive to another that preserves both directory structure and catalog information?
Thanks in advance.
Artie

Humm, this is strange-Version 4 is supposed to move entire folders; Version 3 did not do this.
Okay, Plan B.
Open Elements and do a Full Backup and point to your external hard drive.
When this has finished running, do a Restore. You should get a pop up asking if you want to use the existing folder structure. Answer Yes and point to your External HardDrive (EHD). This should copy your photos and the Organizer file over to your (EHD).
Now look in Preferences under Files (I think, don't have program open) and you will see one value for where to store photos and one for Organizer location. Change these to your EHD so future photos and tags/collections are written to the EHD.
Verify all your tags and collections came over correctly.
If you are satisfied the transfer went correctly, you can erase your photos from your hard drive to free up space. You can also delete the Organizer file if you want.
Option 2-Use Windows Explorer and move all the files from your hard drive to your EHD. This will keep your folder structure, but will cause havoc with Organizer.
Open Organizer and do File>Reconnect All Missing. It will be all of them. You should have an option to change the drive to your EHD. It may take quite a while to reconnect all of them, but since all the folders/files are the same name it should find them all.
If you wish, you can change the drive location manually. However, I've found many users 1) do not have MS Access on their machine and 2) are not experienced in using the program. If you are comfortable with the program, let me know and we'll get some directions.
Finally, I see a copy of the post in the Technical side. Since most forum users read both sides of this forum, I'm going to reference this thread in that post so anyone can see what we have tried so far.

How to force Jdeveloper to preserve existing sources directory structure?

Hi all,
I have JDeveloper 9.0.3.4 which I have to use.
I tried to import to project from existing sources and I tried to keep existing sources
directory structure by selection option "Scan source paths to determine project contents" which should (according to documentation) preserve existing directory structure and show it in the Navigator.
But instead I get always (Jdev default?) directory structure:
Sources
HTML Sources
Miscelaneous Files
I changed default settings for Input path in project settings and for default project settings but still I get this Jdev structure.
Is there a way to force JDeveloper to preserve the directory structure of sources it imports from?
Many thanks,
Mile

I'd like to be able to specify the default project directory structure in 10g as well. For example I would like to have under the project root:
build.xml
src\
generatedsrc\
config\
resources\
build\
deploy\
Generating an ant build.xml using the wizard should also take into account the directory structure being used by the JDeveloper project build. I don't see why I should have to modify the build.xml file at all.

Ant Directory structure.

Hi,
We are developing J2EE application that would contain number of components. Each component would be a ear file that would contain EJB jars and war which can be deployed in any J2EE compliant application server.
We are currently using Bedrock framework for applications deployed in Weblogic. It provides a very robust directory structure with most of the ant targets. However it is very custom for Weblogic.
Is there a similar framework that provides a robust directory structure (with built ant targets) which can be delopyed into Orion/Oracle Application Server.
If not, is there any standard directory structure for building J2EE applications? Any recommended source directory structure and why?
Any help is greatly appreciated.
Thanks
Sumanth

ATProject
|
|-->Business
|
|-->Common
|
|-->Ear
|
|-->Ejb
|
|---- . so on
like this the folderers are created for modularizing and also separation of code for
easier maintainance.
the Build.xml for ant i am posting here
<?xml version="1.0" encoding="UTF-8"?>
<project name="MainDeploy" default="development_build">
     <target name="development_build">
          <antcall target="ear">
               <param name="directive" value="development"/>
          </antcall>
     </target>
     <target name="integration_build">
          <antcall target="ear">
               <param name="directive" value="development"/>
          </antcall>
     </target>
     <target name="qa_build">
          <antcall target="ear">
               <param name="directive" value="qa"/>
          </antcall>
     </target>
     <target name="production_build">
          <antcall target="ear">
               <param name="directive" value="production"/>
          </antcall>
     </target>


     <target name="ear" depends="web">
          <echo>Entering the EAR process</echo>
          <ant antfile="ear.xml" target="${directive}"/>
     </target>

     <target name="web" depends="business">
          <echo>Entering the Web process</echo>
          <ant antfile="web.xml" target="${directive}"/>
     </target>

     <target name="business" depends="ats_ejb">
          <echo>Entering the Business process</echo>
          <ant antfile="business.xml" target="${directive}"/>
     </target>

     <target name="ats_ejb" depends="integration">
          <echo>Entering the Prototype EJB process</echo>
          <ant antfile="ejb.xml" target="${directive}"/>
     </target>

     <target name="integration" depends="common">
          <echo>Entering the Integration process</echo>
          <ant antfile="integration.xml" target="${directive}" />
     </target>

     <target name="common" depends="vo">
          <echo>Entering the Common process</echo>
     <ant antfile="common.xml" target="${directive}"/>
     </target>

     <target name="vo">
          <echo>Entering the VO process</echo>
          <ant antfile="vo.xml" target="${directive}"/>
     </target>
</project>
/// End of Build.xml
Start of modular xml.. for examlpe Business.xml
<?xml version="1.0" encoding="UTF-8"?>
<project name="business" default="development">
     
     <property file="global.properties"/>
     <path id="library.path">
          <fileset dir="${localdir}/lib">
               <include name="**/*.jar"/>
               <include name="**/*.zip"/>
          </fileset>
     </path>
     <property name="build" location="${localdir}/business/build"/>
     
     <target name="development">
          <antcall target="create_jar"/>
     </target>
     <target name="integration">
          <antcall target="create_jar"/>
     </target>
     <target name="qa">
          <echo>Creating the business archive for qa</echo>
          <param name="promo" value="qa"/>
          <antcall target="create_jar"/>
     </target>
     <target name="production">
          <echo>Creating the business archive for production</echo>
          <param name="promo" value="production"/>
          <antcall target="create_jar"/>
     </target>
     
     <target name="copy_files">
     <mkdir dir="${localdir}/business/build"/>
     <copy overwrite="yes" todir="${build}">
     <fileset dir="${localdir}/business/src">
          <exclude name="**/*.java"/>
          <exclude name="**/*.class"/>
          <exclude name="**/*.jpx"/>
          <exclude name="**/*.dep2"/>
     </fileset>
     </copy>
     </target>
     
     <target name="compile_source" depends="copy_files">
          <echo>Compiling source</echo>
          <javac srcdir="${localdir}/business/src" destdir="${build}" >
               <classpath refid="library.path"/>
          </javac>
     </target>
     
     <target name="create_jar" depends="compile_source">
          <echo>Creating JAR file from compiled source</echo>
          <jar jarfile="${localdir}/lib/ats_business.jar"
               basedir="${build}"/>
     </target>
</project>
Hope you could get me
Alll The BEst

ORACLE_HOME Directory Structure and Content description

Similar Messages

Maybe you are looking for