Oracle HR interfaces with ADP HRB and or ADP Pay eXpert

who is familiar with this application process?

I am working as Oracle DBA having 3.2 years of experience. If you have any requirements for me please let me know.

Similar Messages

Is it possible for Nexus7000 flexible netflow monitor for interfaces with different vrf and export to one netflow analyzer?

I have a Nexus 7000 with many vlan interfaces with multiple vrf, I would like to know if my netflow analyzer only connected to one vrf, can I use flexible netflow on the Nexus 7000 to monitor those vlan interfaces with multiple vrf and export them to my netflow analyzer, so that I can see all flow from different vrfs on my netflow analyzer?
Thank you!

Adriano, there is a RV042G, which supports the gig ports and a 800 mbps nat throughput. Here is the datasheet
http://www.cisco.com/en/US/prod/collateral/routers/ps10907/ps9923/ps12262/data_sheet_c78-706724.html
If you are using a DSL connection, the SRP527/547 models may be an alternative. These models support the RFC 1483 Bridges EOA Please note the SRP547 should be 10/100/1000. Also note the SRP521/541 are Fast Ethernet units and they do differ from the SRP527/547. The main selling point of these devices are the FXS/FXO ports. So this may also be a bit of an "unfocused" solution. But it's worth throwing the idea out there!
Here is the admin guide;
http://www.cisco.com/en/US/docs/voice_ip_comm/unified_communications/srp540_series/administration/srp500_AG_2567701.pdf
Here is the datasheet;
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/gatecont/ps10500/data_sheet_c78-550705.pdf

Can we use applets as user interfaces with sockets, RMI and J2EE

Dear Sir or Madam,
Since I am a TA for software architecture class, some one ask me the following question: I think the answer is "No" based on the document on http://java.sun.com/sfaq/
How I answer the quesions? Looking forward your help!!!
1.You may have 2 applets and 2 html files. One applet with one html file may stay at a client PC and run on this PC, and the other applet with the other html file may stay at a server PC and run on this PC. In this case, all the applets are run locally.
2.Could applets works with sockets, RMI and J2EE?
3.Can we use applets as user interfaces with sockets, RMI and J2EE?
Thank you very much!
Best regards,
Jing

The scenario you paint doesn't quite make sense. The "server PC" wouldn't be running an applet, normally, since applets are by definition in a web browser page, and most likely involve user interaction, and "server processes" generally are done without user interaction.
The security rules around applets are that -- by default -- applets can connect with sockets ONLY to the server from whence the applet was loaded. RMI uses sockets (J2EE is too broad a spec) and hence RMI calls would also be limited to the server from whence the applet was loaded. Within that limitation, an applet could open all the sockets it wants, so long as they are all on the server from whence the applet was loaded.
If you want two applets on two different systems to communicate with each other, the simplest way is to have them rendevous through a server process on the server(s) from whence each applet was loaded. Maybe it's PC-a <-> server-a <-> server-b <-> PC-b ...? Or maybe PC-a and PC-b both are talking to the same server.
The limitation is rooted in the security subsystem. You can specify a policy file and override anything in the security subsystem. That does mean signing the applet and then cajoling the user into agreeing to grant greater levels of security than the default. In such a case you can open sockets more broadly and then PC-a could talk directly to PC-b without going through any servers.
- David

How many connections supports a web interface with each camera and how many Adobe Encoder clients does AMS support? AMS Standart

How many connections supports a web interface with each camera and how many Adobe Encoder clients does AMS support? AMS Standart. We need connect by Adobe Encoder many people. what is differences between Adobe Media Server 5 Professional, Adobe Media Server 5 Standard and Adobe Media Server 5 Extended?

For the detailed list of differences across editions refer this link
http://www.adobe.com/in/products/adobe-media-server-family/buying-guide-comparison.html

Calling Oracle Stored proc with record type and table Type

I have a oracle SP which takes record type and table Type which are used for order management.
Is there anay way to populate parameters with these datatypes and call the stored procedure using ODP.NET?
Please help.
Thanks in advance

Hi,
ODP supports associative arrays and REF Cursors. There is no support for PLSQL table of records.
Jenny

Oracle Standby DB with SAP - BRARCHIVE and BRBACKUP

Hi experts,
I was requested to configure and standby Oracle scenario for with SAP. After reviewing many different documentation regarding this, I would like to confirm the following with youu2026How do the BRARCHIVE and BRBACKUP tools should be integrated in this standby/data guard configuration? Actually data guard configuration has been already completed and redo logs are being shipping and applying successfully from primary db to the standby db. Please note that no settings for BRACRHIVE or BRBACKUP have been done so far.
From doc. u201COracle White Paperu2014Setting up Oracle 11g Data Guard for SAP customersu201D, it says that u201CThere is no change to BRARCHIVE configuration necessary. It can work like with any other standolane databaseu201D. What changes or considerations would be required on the current data guard configuration to implement these BRTOOLS? For exampleu2026If I start using BRARCHIVE to copy the offline redo log files from the production database to the standby database, its necessary to disable anything from the current configuration?
Hope I was clear enoughu2026thanks for your help.
Regards

Hi Orkun,
If the use of BRARCHIVE is not required or at least is not mandatory to configure an standby db for SAP environments...I've started thinking If I've followed the right process to complete this?
As mentioned if my post the following documentation was used "Oracle White Paperu2014Setting up Oracle 11g Data Guard for SAP customers". Did I follwed the right process or is there any different set of steps to configure Oracle standby DB for SAP using BRARCHIVE and BRBACKUP?
As you can see I'm confused about the Standby DB configuration process for SAP environments.
Any clarification you can provide me regarding this would be highly appreciated.
Regards

Is oracle 11gr2 comptible with devloper 5 and sqlplus realse 3.3.4

i installing oracle 11gr2 in windowes server 2008
and am using from 6 and from 5
once i connect from 6 it connect fin
but once i use from 5 i get problem
ERROR: ORA-12203: TNS:unable to connect to destination
how i can reslove this problem

ausing from 6 work fin
using this :
sdont =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = tcp.world)
(PROTOCOL = TCP)
(Host = 10.20.3.4)
(Port = 1521)
(CONNECT_DATA = (SID = ORC1)
from 5 entry (not working):
sdont.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = tcp.world)
(PROTOCOL = TCP)
(Host = 10.20.3.4)
(Port = 1521)
(ADDRESS =
(COMMUNITY = tcp.world)
(PROTOCOL = TCP)
(Host = 10.20.3.4)
(Port = 1521)
(CONNECT_DATA = (SID = ORC1)
)

Poor interface with Adobe CS4 and setting the file size for emails

In frustrations over an unfixed bug in iPhoto (slide shows) in addition to too many limitations, I am trying out Aperture. So far it has been a big disappointment. I like Photoshop (CS4) with layers etc. as well as Adobe Camera Raw, both of which I intend to continue using. The workflow in Aperture appears disappointing (Photoshop) and totally absent (Adobe Camera Raw). It seems like Apple's attempt to capture some of Adobe's market share has has happened on the consumer's expense? Besides disappointing functionality, I have run into a surprising problem: No matter how I set the email photo export preset in preferences, the attachment shows up as a large file when exported to Entourage. The size does not change no matter how I set this preference.
My 21 years of loyalty and enthusiasm towards Apple has taken some heavy blows lately. With some 15000 photos and 35+ albums in iPhoto, I don't see too many alternatives. Can someone tell me if there is a way around these problems.

First of all I am not comparing Aperture to Photoshop by expecting the layers function. It is the interface between the two I am questioning. We obviously also have different expectations to Aperture. Mine are solely based on my experiences with iPhoto and what Apple tells me on their website:" Aperture 3 is a professional photography application that lets you refine images, showcase your photography, and manage massive photo libraries. Aperture 3 gives you all the easy-to-use tools you need to import, organize, compare, enhance, and share your photos." I do not find a single sentence stating that it is primarily a "Raw image editor processor" as you are defining it. I was not looking for a new raw editor. I was, however, based on Apple's claims above, expecting a combined advanced editing an photo library application. As such I also expected layers. That is not comparing it to Photoshop. Naturally our views are based on expectations and experiences, and ours are just different, that is all.

ORACLE 8i INSTALLER WITH P4 ISSUES AND TNS ERROR WITH 9i

I want to thank those that have been of help on this subject matter. Finally after 2 agonised weeks, I was able to get around the Oracle 8i installer not able to run on my Pentium 4 laptop. Also having problem logging in to 9i SQL*PLUS. I just want to reinstate that by renaming the file symcjit.dll to symcjit.old does not work automatically. I tried it on Oracle 8.1.6 and 8.1.7(Enterprise/Standard/Personal) many times. Although it did work with Oracle Personal 8.1.6 at one point in time after the system has already 9i installed. After uninstalling the 9i, the installer stopped working again. I WAS NOT SURE IF ORACLE HAS THIS ORACLE 9i DATABASE ENTERPRISE/STANDARD/PERSONAL FOR WINDOWS NT/2000/XP ON CD. THE ONE I BOUGHT IS THE 9IAS AND 9IDS (2 Boxes) WHICH WILL NOT CONFIGURE YOUR DATABASE FOR YOU.
When I was about to give up after doing some more research, then I saw the download for "Oracle9i Database Enterprise/Standard/Personal Edition for Windows NT/2000/XP". I followed the exact direction, but did everything in my directory and not DOS since I don't know the command for unzipping files in DOS. By unzipping all the files in their respective folders Disk1/Disk2/Disk3, and going to install/win32/setup.exe, the rest of the installation went smoothly, when the system prompt for the location of the next disk, just type 2 and then 3. The installation configured everything like tnsnmaes, instances, databases e.t.c. All I did was suppied the password for Sys and System.
By downloading this particular file, I was able to bypass any configuration which is a pain, but not for you DBA guys out there. THE DOCUMENTATION FOR THESE CD,s DID NOT GIVE EXACT STEP BY STEP FOR CONFIGURATION, ONLY INSTALLATION. I AM A DEVELOPER AND NOT A DBA. Orale 8i is more easy to confugure than 9i. I WAS ALSO ABLE TO INSTALL 6i, 9ids AND SQL NAVIGATOR ON TOP OF THIS 9i, AND ALL CONNECTIONS WORKED PERFECTLY BY USING SYS OR SYSTEM AND THE PASSWORD I SUPPLIED DURING INSTALLATION.
AGAIN THANKS TO EVERYBODY USING THIS FORUM. YOU GUYS ARE GREAT AND DOING A GOOD JOB HELPING OUT OTHERS. LET'S KEEP IT ROLLING!!!
Timi Jones

O yea, I used WinZip 8.1 and it created correct directory stucture - that's the whole problem

Oracle JInitiator issue with Firefox 3 and IE7 - not working!

Hi,
I'm accessing the oracle apps server through VPN using a Windows Vista system running Firefox 3 and IE 7. I'm able to log on and access the self service pages correctly. But I'm unable to access the form based pages. If I use the JInitiator 1.3.1.21, both browsers crash (though Firefox says missing plugin and mentions this version only). On installing higher versions of the plugin (28, 30), IE 7 keeps giving the message "installing components...oajinit.exe" and there is no more progress.
Could anyone please let me know what could be the issue and how to resolve it.
Thanks in advance!

As I don't have access to metalink yet, can you tell me for my configuration what is certified and what browser I should use? I already mentioned that my OS is Vista and I have IE7. I realise that IE6 cannot run on Vista and now Firefox 3 cannot be used. So what JInitiator should I use for IE 7?The currently supported desktops for Release 11i include:
- Win2K / WinXP + IE6 / Firefox 2.x
- WinXP + IE7 / Firefox 2.x
- Mac OS X v10.3.9 + Safari 1.3 and higher
- Mac OS X v10.4.7 + Safari 2.0 and higher
- Vista desktop clients running the native JRE plug-in on IE 7 ***
*** Oracle JInitiator Not Certified for Vista Desktops: Oracle JInitiator 1.3 will not be certified for Vista desktops. Jinitiator 1.3 is based on JDK 1.3. JDK 1.3 is not compatible with Vista. No new updates to JInitiator are planned for Vista.
Firefox 2 Certified on Vista for Oracle E-Business Suite
http://blogs.oracle.com/stevenChan/2008/04/firefox_2_certified_on_vista_f.html
Windows Vista + IE7 Certified with E-Business Suite
http://blogs.oracle.com/stevenChan/2007/11/windows_vista_ie7_certified_wi.html

Visual Studio/ Oracle set up with both local and remote database

Hi, I am developing a database application in Visual Studio 2010, and have installed Oracle Database 11g Express on the same pc - (Windows 7, 64bit).
Now I am faced with what I need to install next: I've seen that Oracle Developer Tools for Visual Studio is required/recommended, but as it comes as part of the ODAC suite, it asks if I want to install the client or server version. Which should it be?
And would the situation change if I also needed to connect to a remote (Oracle 10g) database? I'm keen to avoid having tnsnames files all over the place, if at all possible, but would I need a separate Oracle client installation in either case?
Many thanks,
Nick

Hi,
Are you actually going to drag and drop things from Server Explorer, and or use Sever Explorer to create/edit/debug stored procedures and such? If so, you'll need (32 bit) Oracle Developer Tools installed, and you'll need to install it into a separate home from the Express home.
If you're just going to "hand code" ODP.NET, you can use the ODP.NET that installs in the Express home. Note though that in VS2010, projects default to compile target of "x86", so to run a 64 bit app with the 64 bit ODP/client (assuming you installed 64 bit db home), you'll need to change it to x64.
You can connect from ODP.NET without tnsnames via the EZConnect version of the connect string.. ie,"data source=//serverhost:port/db_service_name; user id...etc.."
You can use 11g client against a 10g database.
Hope it helps,
Greg

Create New Oracle R12 Server with multi nodes and migrate the Production Data on it ?

Good Day,
I have New Task and I don't know how to start.
Am working on Oracle Application 12.1.3
And Database 11.2.3
OS Redhat Linux 6.1
My Production Server have the database and the application on the same Server (Single node),
I want to create another 2 Servers with same Operating system to separate the application and the Database to be each one on separate server (Multi Nodes),
And Migrate the Production Server Data on It?
And i need to know how many days it will takes because we are live now ?
Regards

Install the OS on the new servers -- Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 (Doc ID 761566.1)
Use Rapid Clone to move the application/database to the new server.
Rapid Clone Documentation Resources For Release 11i and 12 (Doc ID 799735.1)
Cloning Oracle Applications Release 12 with Rapid Clone (Doc ID 406982.1)
For the duration, it depends on the size of your application/database and how long it takes to copy the files.
Thanks,
Hussein

Deployement problem in Oracle App Serv with hibernate + JPA and Spring

Dear All,
     I am facing a problem in deployment of a web application in oracle application server 10g. but the same is working fine with Tomcat. The following Exception. Is being thrown.
     Failed to deploy web application "OraTest". Failed to deploy web application OraTest". . Nested exception Resolution:
Base Exception:
java.rmi.RemoteException
deploy failed!: ; nested exception is:
oracle.oc4j.admin.internal.DeployerException: Unknown assembly root-tag attribute: version. deploy failed!: ; nested exception is:
oracle.oc4j.admin.internal.DeployerException: Unknown assembly root-tag attribute: version     I am using the following technologies
1.     Spring 2.0.7
2.     Struts 2.0.9
3.     Hibernate 3.3
4.     JPA 1.0
5.     Oracle App Server 10.1.2.0.2
Web.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
     <display-name>My Application</display-name>
     <filter>
          <filter-name>struts2</filter-name>
          <filter-class>
               org.apache.struts2.dispatcher.FilterDispatcher
          </filter-class>
     </filter>
     <filter-mapping>
          <filter-name>struts2</filter-name>
          <url-pattern>/*</url-pattern>
     </filter-mapping>
     <welcome-file-list>
          <welcome-file>/index.jsp</welcome-file>
     </welcome-file-list>
     <servlet>
          <servlet-name>dwr-invoker</servlet-name>
          <servlet-class>
               org.directwebremoting.servlet.DwrServlet
          </servlet-class>
          <init-param>
               <param-name>debug</param-name>
               <param-value>true</param-value>
          </init-param>
     </servlet>
     <servlet-mapping>
          <servlet-name>dwr-invoker</servlet-name>
          <url-pattern>/dwr/*</url-pattern>
     </servlet-mapping>
     <listener>
          <listener-class>
               org.springframework.web.context.ContextLoaderListener
          </listener-class>
     </listener>
     <context-param>
          <param-name>contextConfigLocation</param-name>
          <param-value>
               /WEB-INF/conf/spring/datasource-context.xml,
               /WEB-INF/conf/spring/aop-context.xml
          </param-value>
     </context-param>
</web-app>
/Datasource-context.xml
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:aop="http://www.springframework.org/schema/aop"
    xmlns:tx="http://www.springframework.org/schema/tx"
    xsi:schemaLocation="
    http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-2.0.xsd
    http://www.springframework.org/schema/tx http://www.springframework.org/schema/tx/spring-tx-2.0.xsd
    http://www.springframework.org/schema/aop http://www.springframework.org/schema/aop/spring-aop-2.0.xsd">
     <bean class="org.springframework.orm.jpa.support.PersistenceAnnotationBeanPostProcessor" lazy-init="true"/>
     
        <bean id="dataSource" class="org.springframework.jdbc.datasource.DriverManagerDataSource" lazy-init="true">
          <property name="driverClassName">
               <value>oracle.jdbc.driver.OracleDriver</value>
          </property>
          <property name="url">
               <value>jdbc:oracle:thin:@//xxx.xxx.xxx.xxx/mydb</value>
          </property>
          <property name="username">
               <value>admin</value>
          </property>
          <property name="password">
               <value>admin</value>
          </property>
     </bean>
     
     
     <bean id="entityManagerFactory" class="org.springframework.orm.jpa.LocalContainerEntityManagerFactoryBean" lazy-init="true">
          <property name="persistenceUnitName" value="mkclsetsPersistenceUnit"/>
          <property name="dataSource" ref="dataSource"/>
          <property name="jpaVendorAdapter">
               <bean class="org.springframework.orm.jpa.vendor.HibernateJpaVendorAdapter" lazy-init="true">
                    <property name="database" value="ORACLE"/>
                    <property name="showSql" value="true"/>
               </bean>
          </property>
     </bean>
     <bean id="transactionManager" class="org.springframework.orm.jpa.JpaTransactionManager" lazy-init="true">
          <property name="entityManagerFactory" ref="entityManagerFactory"></property>
     </bean>
     <tx:annotation-driven transaction-manager="transactionManager"/>
</beans>Aop-context.xml
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:aop="http://www.springframework.org/schema/aop"
    xmlns:tx="http://www.springframework.org/schema/tx"
    xsi:schemaLocation="
    http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-2.0.xsd
    http://www.springframework.org/schema/tx http://www.springframework.org/schema/tx/spring-tx-2.0.xsd
    http://www.springframework.org/schema/aop http://www.springframework.org/schema/aop/spring-aop-2.0.xsd">

     <bean id="methodLoggingAdvice" class="com.mkcl.sets.common.interceptor.MehodLogInterceptor"/>
     
      
     <bean id="methodCachingAdvice"
          class="com.mkcl.sets.common.interceptor.MethodCacheInterceptor">
          <property name="cache">
               <ref local="methodCache" />
          </property>
     </bean>
     <bean id="cacheManager"
          class="org.springframework.cache.ehcache.EhCacheManagerFactoryBean">
          <property name="configLocation">
               <value>WEB-INF/conf/other/ehcache.xml</value>
          </property>
     </bean>
     <bean id="methodCache"
          class="org.springframework.cache.ehcache.EhCacheFactoryBean">
          <property name="cacheManager">
               <ref local="cacheManager" />
          </property>
          <property name="cacheName">
               <value>mkclSetsCache</value>
          </property>
     </bean>
     
     <aop:config>
          <aop:pointcut id="getCountriesPointCut" expression="execution(* com.mkcl.sets.dao.master.impl.LocationDAOImpl.getCountries())"/>
          
          <aop:pointcut id="methodLogPointCutDao" expression="execution(* com.mkcl.sets.dao..*.*(..))"/>
          <aop:pointcut id="methodLogPointCutService" expression="execution(* com.mkcl.sets.service..*.*(..))"/>
          <aop:advisor id="methodCachingAdvisor" advice-ref="methodCachingAdvice" pointcut-ref="getCountriesPointCut"/>
          <aop:advisor id="methodLoggingAdvisorDao" advice-ref="methodLoggingAdvice" pointcut-ref="methodLogPointCutDao"/>
          <aop:advisor id="methodLoggingAdvisorService" advice-ref="methodLoggingAdvice" pointcut-ref="methodLogPointCutService"/>
     </aop:config>
</beans>Persistence.xml
<persistence xmlns="http://java.sun.com/xml/ns/persistence"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd"
    version="1.0">
     <persistence-unit name="mkclsetsPersistenceUnit" transaction-type="RESOURCE_LOCAL">
          
          <provider>org.hibernate.ejb.HibernatePersistence</provider>
          
     </persistence-unit>
</persistence>Do I need to add some other configuration in the existing files or do I need to add some other configuration files ? Please help to deploy my application.
Thanks a lot in advance.
With Best Regards,
Ishaan
null

Did you ever find a solution to this Ishaan?
I imagine you ended up having to upgrade 10gR2 to 10gR3 at least. Correct?

Connect on Oracle 11g Xe with ADODB c++ and VS2010 (compiled in 64)

Hello everybody,
I develop an application in C++ and ADODB to connect at Oracle 11g XE. I use this connection string : *"Provider=OraOLEDB.Oracle;Data Source=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=MyHost)(PORT=1521)))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=XE)));User Id=MyUserId;Password=MyPwd*;";*
when I compiled in win32, it's run successfuly but in x64 i catch exception : Can not find the provider. It may not be installed.
At this line
hr=m_pConnection->Open(strCs.AllocSysString(),"","",adConnectUnspecified);
someone have an idea ? Thanks for you answer.
Edited by: user13819505 on 3 sept. 2012 06:31

user13819505 wrote:
when I compiled in win32, it's run successfuly but in x64 i catch exception : Can not find the provider. It may not be installed.Did you install the 64-bit Oracle client?

DLL interfacing with mixed value and reference types

I'm currently trying to work with a supplied DLL.
I have header files and all, and the DLL import wizard does a decent job of importing the DLL functions but there are some data types which simply can't be handled.
The DLL requires usage of a data type which is a struct with value and reference data types. I could theoretically replace the references with simple U32s but much of the required information in the data is in the data structures referenced by the pointers.
How do I go about implementing this seeing how I need to be able to pass the data back into the DLL in its original form (value and reference types).
I have something like the following:
struct Item {
Int Device,
*Item Next
*Item Previous
*Data Datastruct
I have downloaded the WDK from Microsoft, have CVI and Visual Studio 2008 available. I'm not very experienced at this end of things... I can deal with Structs with pure value types but how do I get at the data in the reference types?
I strongly suspect I need a wrapper DLL, but how is the best way to go about this?
Shane.
Say hello to my little friend.
RFC 2323 FHE-Compliant
Solved!
Go to Solution.

Hi Shane,
To be honest, I don't understand why you have to pass the ENTIRE structue (if it's "Item" structure. The pointer to the next and the previous item should be held and manituplated in the DLL, doesn't it?
Operate within classes....
Are you talking about Labview Classes? I didn't use it yet. Sorry.
Convert Linked List to Array You can't store all elements by value in a cluster, because it's kind of recursive. The next pointer leads to the same Item structure (with it's own next pointer. If it's a circulary-linked-list it will never stop)
Or did you mean to store the pointers as a U32 value? That should work.
Output the struct as a binary blob Yes, why not ! But that lets me assume you don't know the concrete "Datastructure" ?!
I'm honest again I can't see the important information you mentioned if you pass the Data structure as a binary blob.
Read-only is a very good idea. If you don't need to tweak the pointers in the list you should avoid it.
Balze

Oracle HR interfaces with ADP HRB and or ADP Pay eXpert

Similar Messages

Maybe you are looking for