Oracle Import from 9i into 8i

I have one important question:
Is there a way to make an export from a schema in Oracle Version 9 that I can import into Version 8?
Thanks for your assistance
Daniel

Hi,
Use export 8i to export data from the 9i database, and use import 8i to import into the 8i database.
Metalink Note 132904.1 Compatibility Matrix for Export & Import between different version.
Nicolas.

Similar Messages

  • Error after Oracle Migration from DMTS into LMTS

    Hello ,
    I'm sorry, I posted my question again from ABAP General into this forum ABAP Dictionary. I think that here someone can help me in order to proceed with my job in the Development and in production system.
    We are using SAP R/3 4.6C, with SAP kernel 2271, Oracle 9.2.0.5 and HP-UX 11.23
    I did the Oracle migration from dictionary into locally managed tablespaces on the QTS system (and before that the same migration on a separate system as a copy from production):
    1. export data and index tablespace with Oracle export command (exp: for PSAPCLUD and PSAPCLUI)
    2. import into file for creation of indexes
    3. Drop the data and corresponding index tablesspace with brtools - brspace
    4. recreate the tablespaces with sapdba or with sqlplus (using the ddl scripts created before dropping the tablespaces) - - I think is my problem
    5. import the data with Oracle import command
    6. import the indexes from the previously created sql file
    7. check optimizer statistics, analyze and next extents
    But there is one problem.
    Because I have also used the sapdba and ddl sql for recreating the tablespaces, I didn't specify the SAP data class for the newly created tablespace.
    And in the tables TAORA, IAORA and DDART (what is very unclear for me) 3 rows missing for the USER1, TEMP and ??? data class.
    If you try to import some transport in the corresponding tablespace which data class is missing an error ocur.
    I have read the Note 646681 - Reorganizing tables with BRSPACE, and I saw the part: If the <reorg_tsp> tablespace contains any of the following tables: SDBAH,SDBAD,DBAML,DBATL,MLICHECK,TGORA,IGORA,TSORA,TAORA, IAORA,SVERS,DD02L,DD09L,DDNTT,DDART,DARTT or SAPLIKEY (SAPLIKEY is only available in NetWeaver 2004s or higher), then you should move them to the tablespace <aux_tsp> by online reorganization using BRSPACE:
    brspace -f tbreorg -t <table_list> -n <aux_tsp>
    Do you have the same problem?
    Do you know how I can solve the problem now after the hole migration was done?
    How can I dedicate tablespace data class?
    Is it enought to just enter the same rows into the TAORA, IAORA and DDART?
    Thanks,
    Many regards,
    Ruzica

    Apparently you are trying to mix 32-bit code and 64-bit code. You must ensure that the 32-bit or 64-bit option is used consistently on every command, compiling and linking. The form of the option can depend on the version of the C compiler you are using, and whether you are on an x86 or sparc system. Consult the Pro*C and C compiler documentation.

  • When importing from camera into aperture, photo's are also copied to my desktop, if i delete from desktop i am unable to edit photo in aperture. Must have done something, but what?

    When importing from camera into aperture, photo's are also copied to my desktop, if i delete from desktop i am unable to edit photo in aperture. Must have done something, but what?

    Have a look at your import setting specifically Store Files:
    Make sure it is set to where you want the originals to go.
    Message was edited by: Frank Caggiano - Don;t empty the system trash. The originals that you deleted from the Desktop are in there and are the only copies you have unless they are still in the camera.

  • When i try to import from itunes into FCP 7 i get error, file error; 39 files recognized,0 access denied 243 unknown

    When i try to import from itunes into FCP 7 i get error, file error; 39 files recognized,0 access denied 243 unknown

    Be careful,  FCP is an open system which is great, but it allows you to work with formats that are not completely compatible with fcp and can cause serious problems down the road.  You can check the formats of all audio files brought into fcp by selecting them in the browser and hitting command-9,  Use compressor to convert all audio files to 48k 16 bit aiffs before importing to fcp.  There's a preset for this format in the apple presets.  You mention video files.  The same thing holds.  In particular, avoid bringing in h264 quicktime movies.  Convert to an fcp friendly format like prores using compressor.

  • How do I place tunes I have imported from CD into the appropriate playlists? I am running 10.9.5 on an iMac. I have 18,000 songs and 100+ playlists.It used to be easy on earlier iTunes versions. Now I can 't seem to be able to add songs or whole CDs

    How do I place tunes I have imported from CD into the appropriate playlists? I am running 10.9.5 on an iMac. I have 18,000 songs and 100+ playlists.It used to be easy on earlier iTunes versions. Now I can 't seem to be able to add songs ior whole CDs into existing playlists.

    Hello there, susanmeehan.
    The following Knowledge Base article offers up some great information on how to create a playlist with iTunes:
    iTunes 11 for Windows: Create a playlist
    http://support.apple.com/kb/PH12340
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Look of photos change when import from D40 into iPhoto 6

    I'm using iPhoto 6 and have a Nikon D40. I'm having a problem when I import my photos -- the image quality changes when they go from the camera into iPhoto. The images look more contrast-y, more saturated. I mean, the reds and oranges are so intense it's crazy. They definitely did not look like that when I viewed them in the camera LCD.
    I've tried checking in preferences, but can't seem to find anything that would alter the images during transfer. Would this be a camera problem? Anyone using iPhoto 6 have the same problem as I am with their D40?
    Any help would be much appreciated!

    I am having the same exact problem... iPhoto 6 and Nikon D40. If I import the photos to a folder first, then import from the folder to iPhoto, I can open the iPhoto version and then open the folder version using Preview, just by clicking on the original. I then compare the two side-by-side on the computer screen. The original always looks fine in Preview, so it is clearly a problem with iPhoto over-saturating the photos. I have no solution, but only this observation.

  • Importing from camera into lightroom when camera is connected

    I used to be able to import photos into lightroom when my camera is connected. I somehow am no longer able to do this, maybe because of updates, but I am not sure? I am using version 1.3.1 on a pc running windows vista professional, and my camera is a Canon Rebel Xti. The problem I have is that using windows to import is too slow and it has caused duplicate filenames of files. So I'd love to be able to have lightroom import from the camera like it used to. Cheers

    Hello. I've seen photographers have portrait setups that have the camera connected to the computer, and as soon as they take a picture, the new image is imported.
    I tried using "auto import" but it's not working properly. I'm shooting Nikon D200 and it has 2 USB modes: P2P and Mass Storage. In the former, I can't have "auto import" on because it needs to read from a folder and it's being read as a "device" instead. In the latter, I'd have to disconnect the camera to take the picture, reconnect it, but it doesn't detect a change (new picture) and so it won't auto-upload. I also have Bridge CS3 which I believe should do what I want it to do, but can't find it on there either.
    Does anyone have a solution?

  • Can't import from Entourage into Mail

    I'm trying to import my Entourage 2008 email into Apple Mail 6.0.  Everytime I try I get an error message, "Error - Unable to connect to Microsoft Entourage.  Try opening Microsoft Entourage first, then run the import".  I tried that and it didn't work either.  I exported my Entourage data as a .rge but then when I try to import it, there is a nested duplication of all the folders from Entourage. And I've got too many emails/folders to drag them.  Any ideas or suggestions?

    This is too late for Norm, but incase anyone else is having this problem, it may be due to having Office 2011 installed (ignore if this is not your case).
    I would find the same error on trying to import from Entourage, and after digging around a bit, tracked the problem to having Office 2011 installed. Once I completely removed Office 2011, the import worked fine.

  • Can't import from Eudora into Mail

    I'm trying to import mailboxes from Eudora into Mail. Unfortunately, Mail crashes right in the middle of the process.  Has anyone had this problem?  If it can't be solved, is there a way to do this manually? Finally, if all else fails, what do you consider to be a good email program other than Mail?  I'd like to upgrade to Snow Leopard and

    Last I knew, Eudora ran fine under 10.5.8
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

  • Import from SLD into integration engine

    When I create a new SLD namespace (sld/dev) and copy all of sld/active into this, then i can define new entries (product, versions etc) in this SLD namespace.
    My problem is, how can I import these in the Design part of the integration builder. It looks like that only the items in sld/active can be selected.
    Any help on if this is possible would we great.

    Hi,
    As your question says that,your are not able to import your software component version in to IR.
    First better you cross check your software component is available or not in the SLD.
    Can you please go to SLD and got to search field and give your software component name and search for the availablity.If you are able to see your software component detailse and after referesh your cache.environment->clear sld data cache
    and try once and also please check your SLD information like logical system name and everything and try If still your facing the same problem let me know.
    Just check if the replies in this thread help you:
    unable to import from SLD
    Unable to read software component versions from SLD
    Please reward points
    Thanks
    Vikranth

  • Importing from Illustrator into AE

    Hey there,
    Having some issues when importing from illustrator to AE.  I have a load of text grouped into words in AI and when I import the file into AE I chose 'composition - cropped layers' so I can move around each object in AE.  However in AE the layers show up in the project window as little black boxes.  When I open the composition of the AI file it's just a blank composition with all the layers in the timeline window.  I don't know why the text isn't showing up?
    In AI all of the layers are individual layers (they aren't all under layer 1 in the layer window).  Can't work out what I'm doing wrong.
    Hope someone can help!
    Thanks,
    Abi

    Hi there.
    I really have no idea what the issue is..  I did the following.  Copied my text from notepad, pasted it into AI, changed it to 'arial', TYPE > Create Outlines, ungrouped the text, grouped each word, went to LAYERS > OPTIONS > Release to layers (Sequence), in AE I imported the AI file as 'Composition - Cropped Layers.  Then it just came up as the blocks.  As a simple test I went through the same process with a new file with simple the word HELLO and it worked fine. 
    The only cause I can think of is maybe because I copied the text from Notepad?   The font I originally chose in AI was Helvetica Neue.  Maybe the font wasn't applicable to AE?
    Strange!
    Thanks,
    Abi

  • Import from sharepoint into ms sql

    When am importing data from SharePoint into SQL Server, am getting only 10 records where as it is having approx 10000 records. I'm using BIDS 2008. I'm not able to figure it out the issue. Can some one help me on this?

    Hi kdinuk,
    According to your description, you are missing some records while importing data from SharePoint into SQL Server.
    Based on my research, the issue always occurs when Error Output (under Connection Manager and Columns) within Source or Error Output (under Connection Manager and Mappings) with Destination Component is set to Ignore Failure or Redirect Row. Then the component
    will succeed, but only the successful rows will be inserted. So please check the Error Output on all your components in your Data Flow Task.
    Besides, for more details about how to import data from SharePoint into SQL Server, please refer to the following blog:
    http://dataqueen.unlimitedviz.com/2011/06/how-to-use-a-sharepoint-list-as-a-data-source-in-your-ssis-package/
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • ChaRM with automatic imports from Dev into QA

    Hi everyone,
    does anyone know how to accomplish automatically importing transports from Dev into QA when the transports are released? I want to skip the step where the IT Operator manually imports them. Thanks.
    regards,
    jason

    Hi Sridhar,
    To be specific, this SWCV has many namespaces and is already existing in Q environment. But the new ns which I created for this scenario is not getting updated to this SWCV in Q. but whenever I import, I get a message that "so many number" of objects are imported.
    Regards
    Vishnu

  • Can't import from 3GS into iPhoto

    Now when I plug my iPhone in, iPhoto starts up, but no preview of pictures is displayed, and the import button remains grayed out. So I can't import photos.
    I have the 3rd party app phoneview. It allowed me to import photos by dragging from it into iPhoto. However phoneview doesn't recognize videos, so they remain stuck on my iPhone.
    I did previously upload one bunch of photos that even included some videos, but now it doesn't seem to work. I'm running the latest everything, including Mac OS, iTunes and iPhoto.

    There are many video formats. iPhoto can't read all of them; in fact, it can't read most of them. Here's something that can:
    VideoLAN - Download official VLC media player for Mac OS X
    On the other hand, the videos are just files. You can copy them anywhere you want in the Finder.

  • How to import from youtube into imove 11

    How to import a video from youtube into imove11?

    How many orders do you need to import one photo?
    Perhaps you need to explain that again
    Regards
    TD

Maybe you are looking for

  • Display problem - horizontal stripes appear sometimes

    I've got display problem. Horizontal stripes appear sometimes (randomly?) on movies or just desktop and stop when I change screen resolution to other and switch back to 1080p. It only happens with my iiyama xb2472hd via hdmi. Everything is fine using

  • Error building executable

    Bonjour à tous, Lorsque  je terminais ma semaine hier, j'ai voulu réaliser un dernier test sur un Touch Panel, mais lorsque j'ai voulu construire l'executable sous Labview 2009, celui ci m'a affiché cette erreur : Error building executable. Unable to

  • Dynamic runtime reporting

    Hello, We are planning to develop an asp.net web application where we require a facility that the users may select a number of required fields at runtime and then can view a report in crystal reports for that fields only. In terms of explanation, the

  • Rule based system in SQL

    we have an airline pricing system whose rules change often, and rather than re-designing tables and the client application code everytime that happens, we would like to develop a rule-based system to dynamically store the rules in a rule-based system

  • Why does the menu look grayed out? ("File, Edit, View, History" etc) It makes them look like they are not going to work. They don't turn black if I click on them either.

    Normally, at least in most Windows programs, and I think other OSes too, items that can be used are black, and items in gray are inactive so that they are not available. It's disconcerting to see the menu in gray, even though they work.