Oracle Incentives, Different plans applicable for the same invoice

Dear Oracle incentive exports,
I need to know how we can apply 2 plans for the same invoice?
Suppose we have ONE plan that says 2% from $0-$750,000 and 4% from $750,000 to $1,000,000. If the sales is $800.000 the 2% will be applied for the 1st 750.000 and the remaining amount (50.000) will be calculated for 4% . This needs to be done without dividing the amount into two invoices.
How can this be applicable???
FADI

Fadi,
when you define formular, you may use split option to handle this
Regards
Srini

Similar Messages

  • Several plan orders for the same day

    Hi SAP Experts,
    In my company we have a requirement to produce the same finish material in two work centers, using different BOMs. This was achieved through production versions for production orders. Now we need to plan (Indipendent requirement & Plan orders )the material based on these two BOMs.
    We enter the indipendent requirement in MD61. I have given the production version against the requirement (In schedule lines tab). However i am unable to give two different requirements for the same day in different production versions.
    Then i tried using different planning versions and assigning the different production versions to different plan versions.
    Although my indipendent requirements are taken in different production versions(As I can see in MD04). When i run MRP plan orders are raised as the total of the requirements and in only one production version.
    Please, Can some one help me to find a method to raise different plan orders for the same day in different production versions???
    regards,
    Madhushika

    Dear All,
    I tried  quota arrangements as a solution for above mentioned problem. What i require is to devide the PIR for a particular day in to two equal parts in two different production versions so that two plan orders will raise in equal quantities for the same day in two different production versions.
    With quota arrangement what i get is alternative plan oders in different versions in diffrent days.
    For example If my PIR are
    Day 1 = 1000
    Day 2 = 1500
    Day 3 =  500
    Day 4 = 1000
    what i get is
    Day 1 = 1000  - prd ver1
    Day 2 = 1500  - prd ver2 
    Day 3 =  500   - prd ver1
    Day 4 = 1000  - prd ver2
    What i want is
    Day 1 = 500 -prd ver1
    Day 1 = 500 -prd ver2
    Day 2 = 750 -prd ver1
    Day 2 = 750 -prd ver2
    Day 3 =  250 -prd ver1
    Day 3 =  250 -prd ver2
    Day 4 = 500 -prd ver1
    Day 4 = 500 -prd ver2
    Hope its clear to you all.
    Please advise me how to configure the system according to this reqirement.
    Best regards,
    Madhushika

  • Is it possible to have Different Interval Ranges for the same Doc Type

    Dear All,
    Here is the issue.Is it possible to have different interval ranges for the same document type according to certain condition.Like my client , wants his interval ranges  be divided according to region(which are many)
    Regards,
    Sameer Jalees

    Hello,
    As you know we can only assign one number range for External and one number range group for internal in the sales document type.
    If you want different number ranges based on the regions, then as Jignesh suggested, you need to go for an enhancement.
    Use the exit USEREXIT_NUMBER_RANGE in program MVA45AFZZ, include a Z table with region as a critera and number range group for different numbers based on the regions. Talk to the business and get more details, get the help of ABAP team for technical details.
    Regards,
    SAM

  • HT1390 Why do I get a different movie price for the same movie on my iPad and iPhone. And 1 device says I can rent it but the other doesn't ,.?

    Why do I get a different movie price for the same movie on my iPad and iPhone. And 1 device says I can rent it but the other doesn't ,.?

    Adding Open DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security, (including anti-phishing and redirects) (Full information about Open DNS is here: http://www.opendns.com/home/nobloat ) and further independent information can be read here:
    http://reviews.cnet.com/8301-13727_7-57338784-263/free-dnscrypt-tool-enhances-ma c-web-security/?tag=mncol;txt
    and here:
    http://www.macworld.com/article/1146064/troubleshootdns.html?t=234
    Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
    208.67.222.222
    208.67.220.220
    (You can also enter them if you click on Advanced and then DNS)
    Sometimes reversing the order of the DNS numbers can be beneficial in cases where there is a long delay before web pages start to load, and then suddenly load at normal speed:
    http://support.apple.com/kb/TS2296

  • My account asks me to change my password every week for no reason and i have different security questions for the same account

    My account asks me to change my password every week for no reason and i have different security questions for the same account

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Try changing the security on the router. Start with no securty as a test.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Explain plan changing for the same sql

    Hi All,
    In a E Business suite application, we have the 10.2.0.4 Database.
    One of the program is running a select stmt which is using different explain plan one in a month which is causing issue in the program running for longer time.
    Ex : When it uses the index A, it is running fine. When it uses the index B, it is running for longer time.
    Can you please advice on the possible reasons for the same sql to choose index B instead of index A some times.
    Thanks,
    Rakesh

    It could be that the SQL is question got aged out of the shared pool and when it came to be reparsed - the values in the bind variables were such that access via index b was more attractive than access via index a.
    Could you please send the query and the good and bad plans and all other information that might help diagnose the problem..
    Note: we had a similiar case where plans suddenly changed for no apperant reason (on 10.2.0.2) - we found that under certain circumstances the optimizer would not peek into the bind varaibles to derive the execution path.

  • Different Info Packages for the same data source.

    Hi Team,
    I have a question, which i asked before that but i ended up with different solution.
    I want to load 02.2002 to till date into ODS. Data source is 0FI_AR_10.
    My boss wants in this way .
    1) one infopackage for 02.2002 to 02.2005 with init.
    2) one infopack for 03.2005 to 07.2008 with init for the same datasource.
    3) one info pack with no selection criteira.
    What will be the result ?
    My guess is, Once we do init for the time period 02.2002 to 02.2005 ,
    the system with note the timepreiod for the Datasource.
    When i try to do Init for the second, the system will say init already exits for the data source. And it will not allow me to do init for the second selection.
    Correct me if  i am wrong.
    Regards,
    -Sonti-

    Your planned InfoPackages:
    - 1) one infopackage for 02.2002 to 02.2005 with init.
    - 2) one infopack for 03.2005 to 07.2008 with init for the same datasource.
    - 3) one info pack with no selection criteira.
    As the selection criteria of package 1) & 2) do not overlap, is it possible.
    For package 3), you need to do it as delta update instead of initialisation.  Package 3) with no selection criteria overlaps with package 1) & 2).
    Refer to the Help Documentation, which explains this quite clearly.
    Link: [Maintaining InfoPackage - Tab Page: Updating|http://help.sap.com/saphelp_nw70/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm]
    >For selection criteria that do not overlap, several initialization criteria are possible for initializing the delta process when scheduling InfoPackages for data from an SAP system. This gives you the option of loading the relevant data for the delta process, step by step into the Business Information Warehouse. For example, you can load the data into BI for cost center 1000 in the first step, and the data for cost center 2000 in the second step.
    >A delta requested after several initializations, contains the super set of all the successful initial selections as a selection condition. This selection condition can then no longer be changed for the delta.
    Hope this help.

  • Sales Deal with two different validation dates for the same material

    Hi SAPers,
    I am trying to create a u201CSales Dealu201D VB31, for the same material/condition, but with two different validation dates. After the creation of the first record, I select u201CNew conditionu201D button, but the system give me the message VK104, u201Cthe condition is being processed in the current session.u201D.
    How can I solve this issue?
    Thanks in advance.
    Pedro

    We can't have multiple records for the same condition and key values valid on the same date. The condition end date is part of the primary key in the database table. The date ranges between the records cannot overlap. When you create a new record, usually the end date is set to 12/31/9999 by default. If you need to have this deal to end on a different date and a new deal to start afterwards, then first you need to change 12/31/9999 to a different date.
    Also usually I try to exit the screen between the transactions.

  • Multiple Incoming Payments for the same Invoice

    My client has an unusual situation.  They are running SAP B1 version 8.8.  They receive multiple incoming checks for payment against the same invoice.  They receive them each month, so this is not a situation where they receive installments against the same invoice.  They want to enter the multiple checks into one Payment Means document, but when they start a new row, the Due Date increments to the next month.  This will cause them to change the date on all but the first row in the Payment Means form.  Is there a way to prevent the Due Date from incrementing to the next month?

    Gordon,
    Does FMS mean formated search?  My client has to enter several checks for payment against one invoice each month, so this will be a common occurrence.  I assume you are suggesting creating a formatted search that would place the current date into the Due Date field when the row is updated.  Correct?

  • Charge 5 times for the same invoice

    Charged 5 times for the same invoice

    liabjaan wrote:
    So for my first purchase ever on Ebay (In this case it was on Ebay.com not Ebay.ca if that matters) I tried to buy the Sennheieser HD598's. This didn't work out as for whatever reason my card kept getting declined. I had no clue why so I decided to try Paypal and created an account at the checkout, still, it didn't work. After trying those two things a few times and making sure everything was in order I just gave up trying to buy them for the time being. I check my bank account balance later only to find that I've been charged 39.11$ CAD by Pitney Bowes 5 seperate times in the span of a few minutes. I've never even purchased anything on Ebay so how is it they can charge me? So I go to check Paypal and it says there's only one transaction wherein 39.11$ CAD was converted into 29.19$ US, and that the transaction was reversed. Despite this it's not showing any funds on either my Paypal nor my bank account being credited back.   So really all I want to know here is what should I do to get my money?Yes, you have purchased on eBay, possibly several times. By repetitively pushing a button, you are "buying". Besides that, I went looking at an example of what you were trying to buy. The one I looked at showed approximately $29 US shipping and import fees, otherwise known as GSP, but, why would you see that? All shipping is collected by the seller and they remit to PB? That is perplexing. The other thing I saw on the listing I looked at, was that it was six payments of, yep, $29 each. Without knowing which specific listing you were looking at, hard to tell what is happening. Know that every time you click on a button, a signal is being sent somewhere. As a seller, I have had buyers buy the same widget twice, in error.

  • Double service entry sheet for the same invoice and same period

    Hi,
    2 service entry sheets have been made for the same PO with the same period and the same invoice no. And hence by mistake 2 bills have been passed for the same work...
    how to avoid this.....
    is there any std.setting available while creating service entry sheet.
    Plz. help
    Navin

    If there is sufficient quantity in the PO, this cannot be prevented by the system.
    Have the data entry person write the SE Sheet number on the physical copy of the bill so that another person entering it can see that SE Sheet is done.
    Hope this helps,
    Lakshman

  • Different due dates for the same SC

    Hi dear experts,
    We are facing a problem with our customer, the customer wants to have the flexibility in the system to create SC´s with 2 different characteristics, the first category are plans which work with the standard and we already have them working fine.
    For the second category, they want to be able to create a "SC 1" and sell it for example to certain "Student A",
    and charge him all the tuition in one payment, the problem comes when they want to sell the same "SC 1" to a "Student B", but in 3 payments with 3 different due dates or even in 5 installments to another student with 5 different due dates.
    The "SC 1" has to be always the same, we cannot create (request of the client) different plans to sort this issue. Also one student can be registered for both type of plans (the standard ones and the no-standard ones)
    The first plans are regular plans (semesters) but the second type can be shorter or complementary to his main SC.
    Is it possible to use a BAdI during fee calculation process to create a function module which allows to select the kind of due date payment each time? and only for the type second kind of category?
    or is it possible to use a BAdI which allow us to insert manually due dates before the fee calculation document is created for this second category without interfering with the first category which works fine?
    Thank you
    Sergio Artinano

    Alvaro,
    I am sorry, but I don't really understand your question.  It seems contradictory.  On the one hand, the customer want the same Program of Study used for both options.  But then, you say that one option is administered by Semesters while the other has different shorter sessions.  In that case, you really need different Session Variants for each case, which means you also need different Programs of Study.
    What is the basis for requiring them to be the same Program?  Couldn't it just be two programs that confer the same Degree/Qualification?
    I guess I don't understand the fundamental nature of this 'second option'.  For example, is it just a spearate registration 'option' for the program?  If so, you could model it as a Specialization.
    However, based on what I gather so far, I am thinking you need two programs.  Can you explain further what the two program options really are, and what they have in common with each other that makes the customer want to use a single SC object?
    Michael

  • How to manage different supply parameters for the same item based on demand quantity?

    We are using unconstrained ASCP.  We have some products that can be produced in a 'small' machine or can be produced in a large tank.  If ASCP has created a planned order for a quantity less than 1000 it will be made on the small machine with the supply quantity = demand quantity.  For example, we have a demand of 250, we will make exactly 250 on the small machine.  But if the demand quantity is greater than 1000 we will make the supply in the tank with a fixed order quantity of 1590.  Financially it will cost us less to do this and scrap the difference because the small machine is very expensive to run compared to the tank.
    The challenge is, say we need 1200.  ASCP generates a planned order for 1200 and all the dependent demands support 1200.  Now we want to make 1590 and we are short of materials.  This assumes we have set the item with no supply parameters.  On the other hand, if we set a fixed order quantity of 1590 but only need 100 then we we have to scrap the materials for the balance due to a short shelf life.
    Any ideas how to set a supply quantity using different parameters based on the demand quantity?
    Mark Madal

    Hi Mark,
    I personally don’t see any standard solution for this requirement especially with an unconstrained plan.
    However, if it is feasible, you can try below solution with a 'constrained plan with decision rules enabled' and check if it works,
    1.   1. Define two different items – Item A and Item B
    2.   2. Item A uses small machine in its routing and can have any demand that is below 999. So, Max order quantity = 999.
    3.   3. Item B uses Large Tank in its routing and is a substitute of item A. Also, fixed order quantity = 1590.
    4.   4. Define component substitution relationship between A and B. A and B will have identical BOM.
    In a constrained  plan with decision rules enabled, optimization logic will ensure that planned orders are generated for Item A whenever there is demand below 999. And for Item A, supply will always be equal to demand quantity. When the demand is more than 999, optimization engine will select substitute item B and will generated fixed supply of 1590 for it.
    Check if this satisfies your requirement.
    Regards,
    Durgesh P
    (Please mark this post helpful or correct, if answered)

  • Get Info sees different "Open With" for the same file on different computer

    I've got a laptop (17") and a desktop, both with OSX 10.4.3. I had a disk problem with the laptop, but was able to get everything off the disk, reformat it, and put it all back. Everything's been working fine until today, when I tried to use the Equation Editor in Office. It wouldn't work. As I tried to chase down the problem, including reinstalling Office, I realized that my laptop was seeing certain Office files using GetInfo as "Open With" Netscape. I compared this with the settings on the desktop, and they were different. Different applications, different icons, even.
    Then I noticed that when I have the CD in the laptop and do GetInfo on a file there, or even look at the icon, it's different from what appears when I look at the same file on the desktop. So it appears to be an OSX issue, not a Microsoft issue.
    I've rebuilt permissions several times. I changed the OpenWith settings, but that didn't solve the problem. But I think it's because other Office files are being misread by the OS, too.
    If anyone has a diagnosis (and hopefully, a cure), I'd really appreciate it.

    Hi, Jim.
    You wrote: " I realized that my laptop was seeing certain Office files using GetInfo as "Open With" Netscape."If you are seeing more than just Office documents displaying the incorrect default application, this could indicate a corrupted Launch Services cache or preferences on the affected Mac.
    In associating documents with applications, Finder employs Launch Services. Launch Services employs several files to associate documents with applications and vice versa. When these files become corrupted, this can result in problems including:
    - The wrong applications being launched when double-clicking a file.
    - Multiple copies of a single application appearing in the Open With menu for a given document.
    - Incorrect icons appearing on files, folders, or other objects.
    The following steps will remove all of the files used by Launch Services. Be sure to read these instructions entirely, including the Notes, before proceeding.
    1. Quit all running applications.
    2. Trash the following two files in the Computer > Macintosh HD > Library > Caches folder:
    - com.apple.LaunchServices-0140.csstore
    - com.apple.LaunchServices-014xxx.csstore
    where xxx is the uid number for the affected account in the NetInfo database. Type your Admin password when prompted to authenticate the deletion of the first file. See Notes [1] and [2].
    3. Trash the com.apple.LaunchServices.plist file in your Home > Library > Preferences folder. See Note [3].
    4. Restart your Mac.
    5. Log in to your account.
    6. Empty the Trash.
    Do not empty the Trash until after you have restarted your Mac.
    Notes:
    [1] Step 2 will result in you being prompted to approve the launch of the application associated with a document the first time you double-click a document. These alerts are a result of the security feature in Mac OS X. The list of applications which you have previously approved are saved in the caches deleted in step 2.
    [2] The first user account defined on your Mac is generally uid 501, the second uid 502, and so forth. For example, the second file ID for the first account would becom.apple.LaunchServices-014501.csstoreYou can find the uid number for any account as follows:1. Launch NetInfo Manager, which is in the Computer > Macintosh HD > Applications > Utilities folder.
    2. Select users in the middle column of the NetInfo Manager window.
    3. Select the desired user account in the right column of NetInfo Manager.
    4. The data for the selected user, including uid, is displayed in the lower pane of the NetInfo Manager window.[3] Step 3 will reset to default values all associations you have created between specific file types and applications. For example, if you set PDFs to open in Adobe Acrobat instead of Preview, they would now open in Preview again until the association of PDFs with Acrobat is reset. You may want to skip step 3 to see if the other steps resolve the problem. However, if skipping step 3 does not resolve the problem, running steps 1-6 again, including step 3, should resolve the problem.
    Note that some of the information above is from the "Applications" chapter of my book, Troubleshooting Mac® OS X, Tiger Edition.
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • Add advanced action to submit button and setting different objectives score for the same course

    Hi, i would like to increase a counter in a quiz slide when the user press the submit button, using advanced actions.
    It's like if the submit button is somehow inhibited from certain options, and i cannot find how to add an advanced action to it.
    what i need, is to allow unlimited attempt until the user selects the right answer. each time the user click on submit, a counter increases by one. When user finally select the right answer, we read the counter value and assign a different score, depending on the attempt (for example: 1st attempt=20 points, 2nd attempt=10 points, 3rd attempt=0 points)
    After that, i need to save all score obtained for a certain group of quiz slide separately from the "main score" (i think the main score is stored in cmi.objectives.0.score)  to have partials scores for a course. I examined the "advanced interactions" panel and i noticed that for each quiz slide there is a specific interaction ID and each quiz slide is associated typically to the same Objective ID. What i need is to associate different groups of slides to different Objective ID's.
    In Storyline i was able to do this by passing to the lms a cmi.objectives.n.score (where "n" is the place in the objectives array) and i did it by executing a javascript on success for each question slide. (each javascript added the score of previous slides in the same group to obtain the total score of the group to be passed to lms with a specific function).
    examining captivate scorm functions in the published scormdriver.js i found the following function
    function SCORM_SetObjectiveScore(strObjectiveID,intScore,intMaxScore,intMinScore)
    so i think it can be done the same way in captivate executing javascript in the right way.
    Is there also an easier solution to write different scores to different obectives in the same course?
    many thanks for any help!

    Have a look at:
    Question Question Slides in Captivate - Captivate blog
    Question Question Slides - Part 2 - Captivate blog
    Indeed, Submit button is part of the Question slide, not a normal button. You can add a custom shape button, but it will never replace what happens when the Submit button is clicked: validation of the answer, showing captions, adding to score etc. Making the score depending on the attempt is not possible with default functionality, it is possible with custom question slides, but then the reporting to LMS is another issue. You should try to do it by JS, or if you only need SWF-output you could use the Master widget by InfoSemantics.
    Link score to attempts in Custom questions - Captivate blog
    Lilybiri

Maybe you are looking for

  • RSA7 to BW data fetch problem

    Hi Guys, I am extracting data from RSA7 to BW with delta update. in RSA7 tcode I can see column Total is populated with some entries means it has records, when I tried to see these records in Queue-> Display data entries->Update mode (Delta update) I

  • How to set the debug port for Eclipse for OracleAS 10g Enterprise

    Hello All, I am using OracleAS 10g Enterprise, and using dcmctl to startup the server. But i do not know how to set the debug port in the startup script for debugging with Eclipse. I have tried to add the following options to the dcmctl.bat, but stil

  • Improving Precision when scaling to exact pixel size

    Hi All, I'm very new to javascript and illustrator scripting, so I'm pretty sure my problem might be easily fixed I'm trying to write a script for creating PNGs with a specified pixel size.  I have created the following functions, which first works o

  • Moving elements in LiveType

    I have a couple of different title elements on different tracks. Is there a way that I can lock these elements together then resize and move them, like you can in Photoshop? I need them to stay the same size in relation to the other elements that I w

  • Oracle University Study Guide

    Does anybody know how to get Oracle University Study Guides ? Is it possible to buy them ? Thanks, Navid