Oracle Information Rights Management - Licensing

Hello,
I tried querying this over the phone, unfortunately I ended up going round in circles on the automated system and eventually being cut off!
Please follow this link:
http://www.oracle.com/technology/software/products/content-management/index_irm.html
IRM Desktop (previously known as SealedMedia desktop) is a free download. I need to identify its licensing restrictions.
Is this application allowed to be deployed over a network? My client wish to do so and I cannot see any EULA within the application that outlines its terms of use.
If somebody could advise it would be greatly appreciated.
Many thanks
Jake Almond

Hello,
Our client has an urgent need for an Oracle IRM (Information Rights Management) consultant for a 1+ month project in Jacksonville, FL.
Skill Set:
Hands on experience implementing IRM for the below scope
•     <25,000 internal/external users
•     Global deployment
•     Custom API for extending number of context
•     Ability to provide mentoring/training
Rate: $100/hr
** Potential for some remote work**
Start date: 10/5/09
If you are interested/available, please send me an updated resume and I’ll be in touch for further discussion.
Thanks !
Debbie Forbes
Recruiting Manager
[email protected]
817-478-2055
fax 847-444-0424
STA USA, Inc.
Want to connect and network on LinkedIn?
To connect directly with me on LinkedIn all you have to do is visit:
http://tinyurl.com/yvgww7 and enter this address [email protected] in the “Debbie’s email address” box then click on the “Send Invitation” button.

Similar Messages

  • Information Rights Management

    Dear All ,
    how i do integration with Oracle Imaging and Process Management and Information Rights Management Servers 11g with Oracle Content Management that come with Oracle Webcenter 11g .
    FYI we did installation on weblogic and the server work fine ....
    Regards,
    Ahmad

    Please, post this question to the content management forum.

  • Steps to configure Information Rights Management in SharePoint 2013 On-Premise

    Hi,
    What are the steps to configure Information Rights Managment [IRM] on SharePoint 2013 On-Premise.
    Regards,

    2. PHases
    1. you will have to configure a IRM server
    2. You will have to integrate IRM iwth sp server. 
    Below article should explain all
    http://msmvps.com/blogs/ivansanders/archive/2012/06/08/check-out-the-weather-forecast-for-teched-2012.aspx

  • Information Rights managements - Sorry,you need permission to open this document

    I have configured "Information Rights managements" on share point .
    I have also configured it on "Documents" document library.
    I have a user that is in "Approve" Group.
    I log in to portal by this user . This I download a file from "Documents".
    When I try to open it , it asks me for credential .
    I set the username and password . Then I get this message "Sorry,you need permission to open this document.Do you want tp request permission from http://servername/en-us/Documents".
        So why the user cannot open the file although he is in "approve"  group and this group found in the permission of library.
    ASk

    Hi himo,
    Any update?
    Best regards,
    Patrick
    Patrick Liang
    TechNet Community Support

  • How I can download from the adobe's website the livecycle rights management licenses?

    How I can download from the adobe's website the livecycle rights management licenses?

    Try using a different browser.

  • Apply Information Rights Management to document library with edit permission to site admin or Member Group in O365

    Apply Information Rights Management to document library with edit permission to site admin or Member Group in O365.
    so that one or few limited users can update or edit documents in IRM applied document library

    Hi,
    Based on your description, my understanding is that you want to apply Information Rights Management to a document library.
    Here is a link about how to set up Information Rights Management (IRM) in SharePoint admin center, you can use as a reference:
    http://office.microsoft.com/en-us/office365-sharepoint-online-enterprise-help/set-up-information-rights-management-irm-in-sharepoint-admin-center-HA102895193.aspx
    Here is a link about how to apply Information Rights Management to a library, you can use as a reference:
    http://office.microsoft.com/en-us/sharepoint-help/apply-information-rights-management-to-a-list-or-library-HA102891460.aspx
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

  • Microsoft Office has detected a problem with your Information Right Management configuration.

    Hi , I have a Windows Server 2012 RMS Cluster with Cryptograph Version 1 and trusted public certificates. I am using AD RMS at the moment with Exchange and it works fine via Outlook Webapp and client workstations.
    I have a Windows 2008R2 Terminal Server which has Office2010 Pro Plus 32bit edition that cannot use ADRMS. The Windows Firewall is turned off on all profiles. The images below show some of the errors that
    are being presented on the terminal server.
    1.This image . When I reboot the server , the first message states , retrieving rights management url and then the error message pops up.
    2.When I try and protect a word document: A prompt pops up to sing in with a Windows Live ID or Use a Microsoft Account. 
    3.The image below is the output from IRM Check. As you can see there is a warning about Office and there are no user or
    machines certificates.
    Sean

    Hi Sean -
    In my experience, this error occurs when the client cannot contact the AD RMS server.  Can you confirm that the computer is domain-joined and you have registered the Service Connection Point?  This the default way the user finds its RMS cluster. 
    You can also direct the client using registry keys.
    I also recommend trying to reach the licensing/certification pipelines directly using Internet Explorer to confirm you have connectivity from the client to the RMS server.  Open IE and navigate to
    https://adrmsurl.com/_wmcs/certification/certification.asmx and confirm you do not receive an error.
    I hope that helps,
    Micah LaNasa
    Synergy Advisors
    synergyadvisors.biz

  • Emc IRM client  (electronic pdf rights management) using problem

    Hello,
    in our business we receive and print pdf files with electronic rights
    the supplier asked us to use this software
    http://www.emc.com/enterprise-content-management/information-rights-management.htm#!downlo ad_software
    IRM Client for PDF adobe reader 11
    Problem:
    we have a terminalserver windows 2008 and thinclients
    the a.m. software adds a new menue into the adobe reader called rights
    If I click on it, I get the error:   "error on server - failed while saving file"
    This software nvever runs beofre on this server.
    Do you have an idea about solving this problem?
    My next idea: downgrading to older adobe reader version  (do you know a good source?)
    thank you in adnvace!

    Sorry, I don't know the answer to your problem.
    But older Reader versions can be downloaded from the Adobe FTP site ftp://ftp.adobe.com/pub/adobe/reader/win/

  • Oracle weblogic 10.3 license information

    We have purchased Oracle weblogic 10.3 from a vendor and have installed by the application team. I need to confirm how can i check the license information (information reg no.of users etc) after installation of the product in the windows server 2008. Is there is any log file which will have license details??

    Oracle has removed the licensing which is bound to IP addresses long before itself.
    From WebLogic Server 10.3 and higher, no license file (no license.bea) is required by Oracle. However, you should deploy the product only in environments which are bounded to your license. That is you should see that if you bought license for 8 cores, you are deploying it only in a 8 core environment and not more.
    There are few notes on the support site related to this.
    Regards,
    Atheek

  • Why users with E1 license can use Azure Right Management on Office 365?

    Hello All,
    We have bought 30 E3 Licenses on my office 365 tenant?. However, E1 users can send mail with Azure Right Management policies on Outook?
    Why does it happens?
    Regards
    Jose Osorio

    Hi Jose,
    As far as I know, for Enterprise E1 plan, subscribers can only add Office 365 Message Encryption on a per-user basis by purchasing Windows Azure Rights Management. You might want to have a check and see if you've added this for E1 users.
    By the way, this is the forum to discuss questions and feedback for Microsoft Office client. There is not so much about
    Office 365 license/service aspects here. For your question, I would suggest you to post in the dedicated forum of
    Office 365 Community, where you can get more experienced responses:
    http://community.office365.com/en-us/f/default.aspx
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    Regards,
    Ethan Hua
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • What is Oracle Web Services Manager  and where can i get more information ?

    Hi,
    Can any one point me to some useful links to know abt
    Oracle Web Services Manager and some example to play with it.
    Appreciate your help !!
    Regards,
    Vijay.B

    Vijay,
    You can install Oracle Web Services Manager (OWSM) as a stand alone product, but the easiest way would be to use the OracleAS SOA Suite Developer Preview, that contains all the SOA components (OWSM, J2EE, BPEL, ESB, ...)
    Oracle Application Server 10g Release 3 (10.1.3.1.0) Developer Preview for the Oracle SOA Suite
    Regards
    Tugdual Grall

  • Confirming method to secure web services through oracle web service manager

    Hi All,
    I am just wondering about the method to secure web service through oracle web service manager.
    I have a unsecure web service "helloworld" which is deployed on JWSDP1.6 toolkit.I want to secure it through oracle web service manager.
    Inorder to secure this unsecure web service,I use gateway(web service manager for securing web service using message level security through certificate).
    So when client want to access the helloworld service,it contacts the gateway securely and gateway intern connect to original web service after decrypting and verification of the signature.When gateway gets response from the web service,it signs the response message and then encrypt and passs on to the client.
    So my question is,is it the right way to secure web service?
    As I am getting the following fault exception :
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
    <SOAP-ENV:Body>
    <SOAP-ENV:Fault>
    <faultcode "http://schemas.oblix.com/ws/2003/08/Faults">c</faultcode>
    <faultstring>Step execution failed with an exception
    </faultstring>
    <detail></detail>
    </SOAP-ENV:Fault>
    </SOAP-ENV:Body>
    </SOAP-ENV:Envelope>
    I checked the log at :
    C:\coresv_install_home\external\oc4j-10.1.2.0.0\j2ee\home\log\http-web-access
    but there is no helpful information available.Thanks for any help.
    Kash

    Hi Rajesh,
    Thanks for your reply.I am using the following policy steps:
    1)for Request (Decrypt and Verify signature).
    2)for Response(Sign Message and Encrypt).
    The configuration for Request is shown below:
    Pipeline "Request"
    Pipeline Steps:
    Start Pipeline
    Log
    Decrypt and Verify Signature
    Basic Properties Type Default Value
    Enabled (*) boolean true true
    XML Decryption Properties Type Default Value
    Decryptor''s keystore location (*) string C:\Sun\jwsdp-2.0\xws-security\etc\server-keystore.jks
    Decrypt Keystore Type (*) string jks jks
    Decryptor''s keystore password string *******
    Decryptor''s private-key alias (*) string s1as
    Decryptor''s private-key password string *******
    Enforce Encryption (*) boolean true true
    XML Signature Verification Properties Type Default Value
    Verifying Keystore location (*) string C:\Sun\jwsdp-2.0\xws-security\etc\server-truststore.jks
    Verifying Keystore type (*) string jks jks
    Verifying Keystore password string *******
    Signer''s public-key alias (*) string xws-security-client
    Enforce Signing (*) boolean true true
    End Pipeline
    And the configuration for Response is shown below:
    Pipeline "Response"
    Pipeline Steps:
    Start Pipeline
    Log
    Sign Message and Encrypt
    Basic Properties Type Default Value
    Enabled (*) boolean true true
    Signing Properties Type Default Value
    Signing Keystore location (*) string C:\Sun\jwsdp-2.0\xws-security\etc\server-keystore.jks
    Signing Keystore Type (*) string jks jks
    Signing Keystore password string *******
    Signer''s private-key alias (*) string s1as
    Signer''s private-key password string *******
    Signed Content (*) string BODY BODY
    Sign XPATH Expression string
    Sign XML Namespace string[]
    Encryption Properties Type Default Value
    Encryption Keystore location (*) string C:\Sun\jwsdp-2.0\xws-security\etc\server-truststore.jks
    Encrypt Keystore Type (*) string jks jks
    Encryption Keystore password string *******
    Decryptor''s public-key alias (*) string xws-security-client
    Encrypted Content (*) string BODY BODY
    Encrypt XPATH Expression string
    Encrypt XML Namespace string[]
    End Pipeline
    I checked the log again but nothing useful there,it is just giving the following values:
    2006-08-14 16:32:50,372 INFO [Thread-21] mstore.OLiteMStore - SELECT MEASUREMENT_STR FROM MEASUREMENT_PERSISTED_STORE WHERE ID=? FOR UPDATE
    2006-08-14 16:34:50,364 INFO [Thread-16] mstore.OLiteMStore - INSERT INTO MEASUREMENT_PERSISTED_STORE (ID,DEF_ID,CONTEXT_ID,PARENT_CONTEXT_ID,TIME,STORETIME,KEY0,KEY1,KEY2,KEY3,KEY4,KEY5,KEY6,KEY7,KEY8,KEY9,KEY10,KEY11,KEY12,KEY13,KEY14,KEY15,KEY16,KEY17,KEY18,KEY19,KEY20,KEY21,KEY22,KEY23,KEY24,KEY25,KEY26,KEY27,KEY28,KEY29,KEY30,KEY31,KEY32,KEY33,KEY34,KEY35,KEY36,KEY37,KEY38,KEY39,DBM0,MEASUREMENT_STR) VALUES(?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,'R',empty_clob())
    2006-08-14 16:34:50,364 INFO [Thread-16] mstore.OLiteMStore - SELECT MEASUREMENT_STR FROM MEASUREMENT_PERSISTED_STORE WHERE ID=? FOR UPDATE
    Any help would be appreciated.Thanks.
    Kash

  • ESA Centralized Management License

    Hi all,
    my customer provides single ESA Appliance and would like to produce another one (either physical or virtual). I can see there is no Centralized management license on existing single ESA (wiht dual ESA it was automaticaly added in the past). Can somebody point me, how to obtain (order) centralized management license for existing ESA to be able to make configuration cluster with future ESA?
    As I understand it right way, there should be no problem to provide configuration cluster with hybrid ESA (Physical and virtual) - Is it true?
    Thank you for any help.

    You may request the license be provided for your serial number by contacting our Global Licensing team.  They will provide you the availability of the Centralized Management feature key based on your contract and appliance.
    Please contact our Global Licensing Operations team:
    https://tools.cisco.com/SWIFT/LicensingUI/Home
    Licensing FAQ
    Phone: 1-800-553-2447, opt 3 (You may request to have a case opened for GLO/Licensing.)
    Their email directly is: [email protected]
    For the virtual appliance - you will need to assure that they build the centralized management feature key into the license XML, and re-provide a fresh XML for your vESA, based on the VLN associated to the vESA.  To get this information - please run 'showlicense' on the CLI.
    I hope this helps!
    -Robert
    (*If you have received the answer to your original question, and found this helpful/correct - please mark the question as answered, and be sure to leave a rating to reflect!)

  • Enterprise Manager Licensing

    Hello,
    so I have read the whole document "Oracle® Enterprise Manager Licensing Information 12c Release 1 (12.1) Part Number E24474-06" ( http://docs.oracle.com/cd/E24628_01/license.121/e24474.pdf ), and still I have no idea whether we can use Enterprise Manager Cloud Control in our environment without purchasing additional licenses.
    In detail, we have several Oracle databases, some with Standard One, some Standard, some with Enterprise license, some EE databases have also additional options and packs, others have no options or packs licensed. The Cloud Control would be a single instance installation without any advanced options or packs.
    Among others, I have read the following things in the documentaion:
    - Enterprise Manager includes a restricted-use license of the Oracle Database for use as the Oracle Management Repository only.
    - For each target listed, you can enable or disable the management packs associated with the target.
    and
    - The base installation of Enterprise Manager Cloud Control 12c includes several features free of charge with the purchase of any Oracle software license or Support contract.
    My questions now are:
    1. From what I understand is, when I own any Oracle software license, I have also a license to install and use Oracle® Enterprise Manager Cloud Control, and I can use this installation to administer all targets in reach, as long as the target I manage has an appropriate license, regardless who is the license owner of the target (we don't own the license of some targets)?
    2. I an earlier release documentation I have read that I can use an Oracle Database as the Enterprise Manager repository and RMAN catalog, but I cannot find it anymore in the current documention, is this still valid that the license for EM repo and RMAN catalog is free of charge?
    3. I plan to use EM and to not buy a license, so where can I find some valid comprehensive information, without asking someone who is specialised on selling licenses? Why isn't it covered in depth in the actual documentation?
    Regards, Gerrit
    Edited by: Gerrit Haase on 23.02.2012 10:39

    Gerrit Haase wrote:
    2. I an earlier release documentation I have read that I can use an Oracle Database as the Enterprise Manager repository and RMAN catalog, but I cannot find it anymore in the current documention, is this still valid that the license for EM repo and RMAN catalog is free of charge?That is still in the http://docs.oracle.com/cd/E11882_01/license.112/e10594/editions.htm#BABDJGGI (Oracle® Database Licensing Information 11g Release 2 (11.2)) under "Infrastructure Repository Databases
    " where it has been for several versions of the DB licensing doc.
    ... Why isn't it covered in depth in the actual documentation?Because it is a LEGAL discussion, not a DOCUMENTATION discussion.
    (And possibly because Oracle Legal likes to keep their options open. ;-) )

  • Office 2013 Rights Management Services??

    I am trying to make a powerpoint file I have created in Office 2013 (on Windows 7 64 bit) a read-only file so that presenters cannot change content, but can still view and present the file normally. 
    This was very easy to do with previous versions of Office, but in 2013 I am asked to sign in to "Rights Management Services" using my live ID. I have no problem with that, but it has not worked for me yet - I get the following error:
    Any advice or help would be much appreciated!
    A couple notes: I can still encrypt with a password, but this would not allow presenters to open, view and present the file without the password. 

    Hi Dan,
    It seems that PowerPoint doesn't have Restrict Editing option available as described here: https://support.office.com/en-us/article/Protect-your-document-workbook-or-presentation-with-passwords-permission-and-other-restrictions-05084cc3-300d-4c1a-8416-38d3e37d6826?ui=en-US&rs=en-US&ad=US 
    So the only option I see to complete your scenario is to use RMS - Rights Management Servers. However RMS can be installed as on-premises service, so you have to deploy and configure AD RMS server (it is not easy as it requires certificates, SQL, designing,
    etc).
    You can other options as weel - for example use Office 365 E3 or E4 licences. Those include Azure RMS subscription. If you have such license assigned to your user account, once you get prompt for credentials - type your O365 user credentials.
    Another option is to use RMS for individuals. Go to the page http://aka.ms/rms and register your private account to use RMS and then you would be able to sign in to RMS Service with your private e-mail account. Be advised that not all private e-mail domains
    are supported. For example you will not be able to register your @gmail.com or @hotmail.com account...
    Did my post help you or make you laugh? Don't forget to click the Helpful vote :) If I answered your question please mark my post as an Answer.

Maybe you are looking for