Oracle INS-01331 Error

Hi there,
Can anybody help please, this is just driving me crazy.
I am trying to install Oracle 12c but I keep getting the above error no matter what.
Before I decide to seek help I did a lot of research and I believe I have exhausted all options.
I have checked C$ sharing, it is enabled and accessible just fine.
I am an Administrator so no problems there, checked C$ sharing granting every concievable access to everybody.
Every time I run the installer I am noticing the following:
1) services.msc - OracleRemExecServiceV2- it is running
2) as per suggestion, I am stopping this service then rerunning the installer as Administrator but then service starts again and when I check 'Temp' folder through Explorer
    I am told that folder is not accessible because of OracleRemExecServiceV2 which is running.
3) Stopping the service and rerunning the installer takes me back to square one,service running temp folder not accessible.
How do you stop the damn thing from locking the folder as I believe that is what is the problem is.
If that is not possible,is it possible to repoint setup to use a different folder as temp folder during the installation so that it doesn't complain about temp folder being locked?
I have rebooted a few times but the scenario and subsequent error is the same, this is really causing me a lot of problems as I have already lost a lot of time.
Any help will be greately appreciated.
Cause - Failed to access temporary location
Action - Ensure that the current user has required permissions to access temporary location

Hi Srini,
Please find included details as requested:
-OS: Windows 7 Enterprise (64bit 6GB RAM)
-I am indeed running the installer by right clicking and selecting 'Run as Administrator'
-I have located installation file and it is too big to copy-paste here so I will only paste section where it is failing below.
It is all pointing to the fact that my account for some reason cannot write to Temporary directory.
I am an Administrator on the machine, I do have a full Admin rights.
I have aso checked that C$ is available and it is just fine, I have double checked.
INFO: Completed validating view at state <supportedOSCheck>
INFO: Validating state <supportedOSCheck>
INFO: Verifying target environment...
INFO: Checking whether the IP address of the localhost could be determined...
INFO: Completed verification of target environment.
INFO: Verifying setup for installer validations
INFO: Overall status of CVU API call:OPERATION_FAILED
SEVERE: [FATAL] [INS-30131] Initial setup required for the execution of installer validations failed.
   CAUSE: Failed to access the temporary location.
   ACTION: Ensure that the current user has required permissions to access the temporary location.
*ADDITIONAL INFORMATION:*
- Framework setup check failed on all the nodes
- Cause: Cause Of Problem Not Available
- Action: User Action Not Available
Summary of the failed nodes
ldebmw7lnr02
- Version of exectask could not be retrieved from node "ldzebamw7lnr02"
- Cause: Cause Of Problem Not Available
- Action: User Action Not Available
INFO: Advice is ABORT

Similar Messages

  • Oracle.jms.AQjmsException: Error creating the db_connection( OSB PS2.)

    hi All,
    I am beginner in OSB 11g. Please excuse me if I am asking any dumb question.
    I am trying to post messages to Oracle AQ by configuring JMS Destination in OSB Alert destination
    I have configured AQ JMS in weblogic 10.3.3 ( OSB PS2) following the blog (http://jianmingli.com/wp/?p=2950)
    When i invoked my proxy OSB proxy service i am getting following exception. Can you please help if i am missing any kind of setup while configuring the JMS Module.
    Caused By: oracle.jms.AQjmsException: Error creating the db_connection
         at oracle.jms.AQjmsDBConnMgr.getConnection(AQjmsDBConnMgr.java:625)
         at oracle.jms.AQjmsDBConnMgr.<init>(AQjmsDBConnMgr.java:399)
         at oracle.jms.AQjmsXAConnection.<init>(AQjmsXAConnection.java:112)
         at oracle.jms.AQjmsXAQueueConnectionFactory.createAllXAConnection(AQjmsXAQueueConnectionFactory.java:320)
         at oracle.jms.AQjmsXAQueueConnectionFactory.createXAQueueConnection(AQjmsXAQueueConnectionFactory.java:198)
         at weblogic.deployment.jms.JMSConnectionHelper.openConnection(JMSConnectionHelper.java:282)
         at weblogic.deployment.jms.JMSConnectionHelper.<init>(JMSConnectionHelper.java:144)
         at weblogic.deployment.jms.JMSSessionPool.getConnectionHelper(JMSSessionPool.java:517)
         at weblogic.deployment.jms.PooledConnectionFactory.createConnectionInternal(PooledConnectionFactory.java:355)
         at weblogic.deployment.jms.PooledConnectionFactory.createQueueConnection(PooledConnectionFactory.java:188)
         at com.bea.wli.sb.transports.jms.JmsOutboundMessageContext.getSession(JmsOutboundMessageContext.java:399)
         at com.bea.wli.sb.transports.jms.JmsOutboundMessageContext.newMessage(JmsOutboundMessageContext.java:621)
         at com.bea.wli.sb.transports.jms.JmsOutboundMessageContext.setRequestMetaData(JmsOutboundMessageContext.java:229)
         at com.bea.wli.sb.transports.jms.JmsOutboundMessageContext.access$100(JmsOutboundMessageContext.java:72)
         at com.bea.wli.sb.transports.jms.JmsOutboundMessageContext$SendAction.run(JmsOutboundMessageContext.java:788)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
         at weblogic.security.Security.runAs(Security.java:61)
         at com.bea.wli.sb.transports.jms.JmsOutboundMessageContext.send(JmsOutboundMessageContext.java:551)
         at com.bea.wli.sb.transports.jms.JmsTransportProvider.sendMessageAsync(JmsTransportProvider.java:680)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.bea.wli.sb.transports.Util$1.invoke(Util.java:83)
         at $Proxy111.sendMessageAsync(Unknown Source)
         at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageWithoutService(TransportManagerImpl.java:489)
         at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageAsync(TransportManagerImpl.java:417)
         at com.bea.wli.sb.init.FrameworkStarter$TransportServiceImpl.sendMessageAsync(FrameworkStarter.java:391)
         at com.bea.alsb.alert.action.jms.JmsActionProvider.executeAction(JmsActionProvider.java:345)
         at com.bea.alsb.alert.AlertDestinationHandlerImpl.sendAlertToDestination(AlertDestinationHandlerImpl.java:105)
         at com.bea.alsb.alert.pipeline.PipelineAlertManager.processAlert(PipelineAlertManager.java:59)
         at stages.logging.runtime.AlertRuntimeStep.processMessage(AlertRuntimeStep.java:125)
         at com.bea.wli.sb.pipeline.debug.DebuggerRuntimeStep.processMessage(DebuggerRuntimeStep.java:74)
         at com.bea.wli.sb.stages.StageMetadataImpl$WrapperRuntimeStep.processMessage(StageMetadataImpl.java:346)
         at com.bea.wli.sb.stages.impl.SequenceRuntimeStep.processMessage(SequenceRuntimeStep.java:33)
         at stages.routing.runtime.RouteRuntimeStep.processMessage(RouteRuntimeStep.java:102)
         at com.bea.wli.sb.pipeline.debug.DebuggerRuntimeStep.processMessage(DebuggerRuntimeStep.java:74)
         at com.bea.wli.sb.stages.StageMetadataImpl$WrapperRuntimeStep.processMessage(StageMetadataImpl.java:346)
         at com.bea.wli.sb.pipeline.RouteNode.doRequest(RouteNode.java:106)
         at com.bea.wli.sb.pipeline.Node.processMessage(Node.java:67)
         at com.bea.wli.sb.pipeline.PipelineContextImpl.execute(PipelineContextImpl.java:922)
         at com.bea.wli.sb.pipeline.Router.processMessage(Router.java:214)
         at com.bea.wli.sb.pipeline.MessageProcessor.processRequest(MessageProcessor.java:99)
         at com.bea.wli.sb.pipeline.RouterManager$1.run(RouterManager.java:593)
         at com.bea.wli.sb.pipeline.RouterManager$1.run(RouterManager.java:591)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
         at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)
         at com.bea.wli.sb.pipeline.RouterManager.processMessage(RouterManager.java:590)
         at com.bea.wli.sb.test.service.ServiceMessageSender.send0(ServiceMessageSender.java:329)
         at com.bea.wli.sb.test.service.ServiceMessageSender.access$000(ServiceMessageSender.java:76)
         at com.bea.wli.sb.test.service.ServiceMessageSender$1.run(ServiceMessageSender.java:134)
         at com.bea.wli.sb.test.service.ServiceMessageSender$1.run(ServiceMessageSender.java:132)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
         at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)
         at com.bea.wli.sb.test.service.ServiceMessageSender.send(ServiceMessageSender.java:137)
         at com.bea.wli.sb.test.service.ServiceProcessor.invoke(ServiceProcessor.java:454)
         at com.bea.wli.sb.test.TestServiceImpl.invoke(TestServiceImpl.java:172)
         at com.bea.wli.sb.test.client.ejb.TestServiceEJBBean.invoke(TestServiceEJBBean.java:167)
         at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl.invoke(TestService_sqr59p_EOImpl.java:353)
         at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl_WLSkel.invoke(Unknown Source)
         at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
         at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
         at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
         at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
         at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused By: java.lang.ClassCastException: weblogic.jdbc.rmi.SerialConnection_weblogic_jdbc_rmi_internal_ConnectionImpl_weblogic_jdbc_wrapper_JTAConnection_weblogic_jdbc_wrapper_XAConnection_oracle_jdbc_driver_LogicalConnection_1033_WLStub cannot be cast to oracle.jdbc.internal.OracleConnection
         at oracle.jms.AQjmsGeneralDBConnection.getProviderKey(AQjmsGeneralDBConnection.java:96)
         at oracle.jms.AQjmsGeneralDBConnection.<init>(AQjmsGeneralDBConnection.java:65)
         at oracle.jms.AQjmsDBConnMgr.getConnection(AQjmsDBConnMgr.java:566)
         at oracle.jms.AQjmsDBConnMgr.<init>(AQjmsDBConnMgr.java:399)
         at oracle.jms.AQjmsXAConnection.<init>(AQjmsXAConnection.java:112)
         at oracle.jms.AQjmsXAQueueConnectionFactory.createAllXAConnection(AQjmsXAQueueConnectionFactory.java:320)
         at oracle.jms.AQjmsXAQueueConnectionFactory.createXAQueueConnection(AQjmsXAQueueConnectionFactory.java:198)
         at weblogic.deployment.jms.JMSConnectionHelper.openConnection(JMSConnectionHelper.java:282)
         at weblogic.deployment.jms.JMSConnectionHelper.<init>(JMSConnectionHelper.java:144)
         at weblogic.deployment.jms.JMSSessionPool.getConnectionHelper(JMSSessionPool.java:517)
         at weblogic.deployment.jms.PooledConnectionFactory.createConnectionInternal(PooledConnectionFactory.java:355)
         at weblogic.deployment.jms.PooledConnectionFactory.createQueueConnection(PooledConnectionFactory.java:188)

    hi All,
    Here is the actual exception while posting message into AQ ( AQ JMS) from OSB.
    Caused By: java.lang.ClassCastException: weblogic.jdbc.rmi.SerialConnection_weblogic_jdbc_rmi_internal_ConnectionImpl_weblogic_jdbc_wrapper_JTAConnection_weblogic_jdbc_wrapper_XAConnection_oracle_jdbc_driver_LogicalConnection_1033_WLStub cannot be cast to oracle.jdbc.internal.OracleConnection
    at oracle.jms.AQjmsGeneralDBConnection.getProviderKey(AQjmsGeneralDBConnection.java:96)
    at oracle.jms.AQjmsGeneralDBConnection.<init>(AQjmsGeneralDBConnection.java:65)
    Not sure what is missing in my AQ JMS configuration. Please help.
    Regards,
    Nagi

  • O1034 Oracle not available error

    Right, I'm running on a Windows Xp platform, I've installed ok and it runs ok. I have manually altered the password of user HR from within sqlplus, and everything is fine.The problem comes when I switch off and switch back on, I am unable to start the database.
    Running sqlplus system/password gives me ORA-01034 Oracle not available and ORA-27101: Shared memory realm does not exist.
    I have tried running stobdb.bat and startdb.bat which both run ok, but I still get the oracle not available error when going into sqlplus. It seems that the PC does not install the oracle set up on booting perhaps? I also cannot access the "Go to database home page", from my web browser, but I'm not sure if it is necessary to access that home page?

    We are seeing this a little bit, and not sure what is causing it at this stage. Starting the database manually seems to help, or at least points to the root cause problems.
    The steps to start the database manually are posted at Re: ORA-01033 after starting and trying to connect. and also posted below
    To shutdown manually go to the SQL Command Line (as the OS user that installed Oracle).
    At the SQL Prompt SQL> issue
    connect / as sysdba
    For example
    SQL> connect / as sysdba
    Connected.
    Then type
    shutdown immediate;
    You should see the following
    SQL> shutdown immediate;
    Database closed.
    Database dismounted.
    ORACLE instance shut down.
    Then type
    startup
    You should see the following
    SQL> startup
    ORACLE instance started.
    Total System Global Area 599785472 bytes
    Fixed Size 1249348 bytes
    Variable Size 192942012 bytes
    Database Buffers 402653184 bytes
    Redo Buffers 2940928 bytes
    Database mounted.
    Database opened.
    Just to be sure, also try a select
    select count(*) from hr.employees;
    You should see
    SQL> select count(*) from hr.employees;
    COUNT(*)
    107
    Any problems or errors reported with any of these steps, please let us know.

  • Does oracle log general errors

    Dear experts,
    I am using Oracle 11.2.0.3. I am researching on random ORA-00900:     invalid SQL statement error that we are seeing in production. Does oracle log such errors in alert.log or any tables? If not can we configure to log such errors?
    Thanks.

    Dont understand.... you are seeing ORA-00900 in production but don't know where to search this error? where do you see it?It is being logged from application in event log which I do not have access to. I wanted to check if oracle also logs such error some where.
    SQL Banner : SQL*Plus: Release 11.2.0.1.0 Production on Wed Nov 28 12:12:25 2012
    SQL :
    SELECT
    overload,
    DECODE (
    position,
    0,
    'RETURN_VALUE',
    NVL (argument_name, CHR (0))
    ) AS name,
    DECODE (
    in_out,
    'IN', 1,
    'IN/OUT', 3,
    'OUT', DECODE (argument_name, NULL, 6, 2),
    1
    ) AS direction,
    DECODE (
    data_type,
    'BFILE', 101,
    'BLOB', 102,
    'BYTE', 103,
    'CHAR', 104,
    'CLOB', 105,
    'DATE', 106,
    'DECIMAL', 107,
    'DOUBLE', 108,
    'INT16', 111,
    'INT32', 112,
    'INT64', 113,
    'INTERVAL DAY TO SECOND', 114,
    'INTERVAL YEAR TO MONTH', 115,
    'LONG', 109,
    'LONG RAW', 110,
    'NCHAR', 117,
    'NCLOB', 116,
    'NVARCHAR2', 119,
    'RAW', 120,
    'REF CURSOR', 121,
    'SINGLE', 122,
    'TIMESTAMP', 123,                              
    'TIMESTAMP WITH LOCAL TIME ZONE', 124,
    'TIMESTAMP WITH TIME ZONE', 125,
    'VARCHAR2', 126,
    'XMLTYPE', 127,
    'NUMBER', 107,
    126
    ) AS oracleType,
    DECODE (
    data_type,
    'BLOB', 0,
    'CHAR', 0,
    'CLOB', 0,
    'LONG RAW', 0,
    'NCHAR', 0,                              
    'NCLOB', 0,                              
    'NVARCHAR2', 0,
    'RAW', 0,
    'VARCHAR2', 2048,                                                            
    0
    ) AS length,
    NVL (data_precision, 255) AS precision,
    NVL (data_scale, 255) AS scale
    FROM
    all_arguments
    WHERE
    data_level = 0
    AND data_type IS NOT NULL
    AND owner = :schemaName
    AND package_name = :packageName
    AND object_name = :methodName
    ORDER BY
    overload, position
    ******************** EXCEPTION PROPERTIES ********************
    Errors: Oracle.DataAccess.Client.OracleErrorCollection
    Source: Oracle Data Provider for .NET
    Number: 900
    ErrorCode: -2147467259
    Data: System.Collections.ListDictionaryInternal
    TargetSite: Void HandleErrorHelper(Int32, Oracle.DataAccess.Client.OracleConnection, IntPtr, Oracle.DataAccess.Client.OpoSqlValCtx*, System.Object, System.String, Boolean)
    Edited by: spur230 on Nov 28, 2012 12:13 PM

  • ORA-01034: ORACLE not available error while creating ASM or database

    Hi all,
    I am using oracle database 10gR2 on windows 2000 pro system.
    I have Installed oracle software and there was no issue with that but now I am facing ORA-01034: ORACLE not available error while trying to create asm instance or even while creating database through dbca.
    I have tried creating the asm instance manually and it was succeeded. Also database creation was successful through manual steps.
    Any idea guys?? How to resolve this issue??

    Hi FK,
    On Windows, it can sometimes mean that the services are not running. I have a check here:
    http://www.dba-oracle.com/t_check_verify_windows_services.htm
    Have you tried using oradim?
    http://www.dba-oracle.com/tips_oradim_utility.htm
    The oradim utility provides more than just the ability to start and stop Windows databases. Windows oradim can create and edit databases. It also allows DBAs to configure script-based installation mechanisms.
    The oradim utility is used on the Windows platform to perform these tasks.
    C:\oracle9i\bin\oradim -startup -sid ORCL92 –usrpwd manager
    -starttype SRVC,INST -pfile C:\oracle9i\admin\ORCL92\pfile\init.ora
    • startup – Indicates that the specified instance should be started.
    • sid – The SID of the database to start.
    • usrpwd – The password for the database user.
    • starttype – Specifies whether to start the instance, the service, or both
    Hope this helps. . .
    Don Burleson
    Oracle Press author

  • Oracle Secure Backup error: 'No such file or directory'

    Hi,
    could you help me to fix the following issue?
    RMAN> run {   ALLOCATE CHANNEL c1 DEVICE TYPE sbt PARMS='SBT_LIBRARY=C:\windows\
    system32\orasbt.dll' ; backup database format 'CF_%d_%T_s%sp%pt%t'; }
    using target database control file instead of recovery catalog
    allocated channel: c1
    channel c1: SID=8 device type=SBT_TAPE
    channel c1: Oracle Secure BackupStarting backup at 26-OCT-09
    channel c1: starting full datafile backup set
    channel c1: specifying datafile(s) in backup set
    input datafile file number=00001 name=C:\APP\AIME\ORADATA\ORCL\SYSTEM01.DBF
    input datafile file number=00002 name=C:\APP\AIME\ORADATA\ORCL\SYSAUX01.DBF
    input datafile file number=00003 name=C:\APP\AIME\ORADATA\ORCL\UNDOTBS01.DBF
    input datafile file number=00004 name=C:\APP\AIME\ORADATA\ORCL\USERS01.DBF
    input datafile file number=00005 name=C:\APP\AIME\PRODUCT\11.2.0\DBHOME_1\DATABA
    SE\TBS_5.F
    channel c1: starting piece 1 at 26-OCT-09
    released channel: c1
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03009: failure of backup command on c1 channel at 10/26/2009 00:20:54
    ORA-19506: failed to create sequential file, name="CF_ORCL_20091026_s10p1t701223
    652", parms=""
    ORA-27028: skgfqcre: sbtbackup returned error
    ORA-19511: Error received from media manager layer, error text:
    sbt__rpc_cat_query: Query for piece CF_ORCL_20091026_s10p1t701223652 failed.
    (Oracle Secure Backup error: 'No such file or directory').
    Thanks,
    jun

    You can work entirely in Xcode by using the command-line tool template in C. Xcode > File > New > Project > Command-Line Tool > Next > Language: C > Next > Create.
    If you do want to work on the command line, you may as well just use the "clang" program instead. The "gcc" tool is just a compatibility tool for existing scripts that are expecting the actual "gcc" program. Apple hasn't used the real "gcc" for years. (Read up on the GPLv3 for more information.)
    The gcc/clang arguments are the same. The "-c" flag instructs the compiler to only compile a single .c file into a .o object file. It won't create an executable. If you are only compiling a single source file, just omit the "-c" flag and the compiler will create an executable named "a.out" that you can run by typing "./a.out". You can specify "-o <executable name>" if you want to specify a name. Once you get more than a handful of source files, using the terminal starts to become a hassle. At that point, you definitely want to start using Xcode.
    I'm not sure why you would try to compile "helloworlddot1.c" and then get an error message about "filename.c". Something else is wrong.
    If you are working in the Terminal, it is easiest to use the "cd" command to move into the same directory as your source files. Then you don't have to keep typing the full path.
    It is hard to say what the "best" community is. There are many to choose from.

  • Oracle SQL DEVELOPER ERROR

    Hello everyone
    Can anyone here please help me with oracle sql developer error
    My problem is that i have installed oracle sql developer as a root and now when i execute the following command
    [root@localhost tmp]# sqldeveloper
    Oracle SQL Developer
    Copyright (c) 2008, Oracle. All rights reserved.
    Type the full pathname of a J2SE installation (or Ctrl-C to quit), the path will be stored in ~/.sqldeveloper/jdk
    /opt/oracle/softwares/jdk1.5.0.19
    Error: /opt/oracle/softwares/jdk1.5.0.19/bin/java not found
    As you can see i did install java but still i keep getting that error
    Thank you

    From what you have shown us, we can't tell that you have installed java. What do you get from the following command?
    /opt/oracle/softwares/jdk1.5.0.19/bin/java -versiontheFurryOne

  • Oracle BI Scheduler Error

    Hi all,
    I have created a request and added it to the dashboard. I have scheduled the request using Delivers. I have created an iBOT and when i save it the following error is thrown. What cud be the reason?
    Oracle BI Scheduler Error: [nQSError: 68019] Authentication Failed.
    Error Details
    Error Codes: GYFPI8RN
    Cheers.
    Thank u.

    Hi I also faced this problem..
    see this link
    http://oraclebizint.wordpress.com/2007/09/13/oracle-bi-ee-10133-configuring-delivers-ibots/
    you need to use the cryptotools utility to register the user name and password of the administrator user.
    Edited by: kart on Apr 28, 2010 1:05 PM

  • Oracle Universal Installer - Error En Create OUI Process (): 5

    When I want to install ODAC (Oracle Data Provider) for Visual Studio gives me the following error:
    Oracle Universal Installer - Error En Create OUI Process (): 5
    Thank You ..

    What version of client are you trying to install? I'd go with 11.2.0.2 to rule out any known issues with the OUI.
    11202 is available on MOS. If you don't have Oracle Support to be able to access MOS, 11201 is available in the downloads section on OTN.
    Greg

  • OLE DB provider 'OraOLEDB.Oracle' reported an error The provider did not gi

    Hi, I've setup oracle client tools on a windows server that runs sql server 7
    tnsping works as well as the client tool test feature on my sid.
    However, I can't seem to use it from SQL Server. I've installed and uninstalled the client tools many times, I'm beginning to think perhaps I installed the wrong package. Weird thing is there is no Listener listed in Windows Services, yet the listener I setup is working.
    I enabled the allow in process property of both the MSADAORA and Oracle OLE drivers from SQL Server, help!!
    SELECT * FROM OPENQUERY(ORACLE_MIRROR, 'select count(1) from dual')
    RESULTS IN:
    Server: Msg 7399, Level 16, State 1, Line 1
    OLE DB provider 'MSDAORA' reported an error.
    [OLE/DB provider returned message: Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
    Provider is unable to function until these components are installed.]
    OLE DB error trace [OLE/DB Provider 'MSDAORA' IDBInitialize::Initialize returned 0x80004005:   ].
    THIS IS AFTER I HAVE INSTALLED THE ORACLE 10.2 CLIENT TOOLS AND SETUP A LISTENER AND TESTED SIDS OK.
    UTILIZING THE ORACLE OLE DRIVER IN THE LINKED SERVER I GET THIS ERROR:
    Server: Msg 7399, Level 16, State 1, Line 1
    OLE DB provider 'OraOLEDB.Oracle' reported an error. The provider did not give any information about the error.
    OLE DB error trace [OLE/DB Provider 'OraOLEDB.Oracle' IDBInitialize::Initialize returned 0x80004005:  The provider did not give any information about the e                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

    The MS OLEDB for Oracle was built some time ago and requires an older SQL*Net version:
    OLE/DB provider returned message: Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
    => see Oracle Version V7.3.3 ... but you have installed V10; so the OLEDB driver from MS tries to locate old SQL*Net client library files which are not available in your installation anymore.
    So best would be to use the Oracle OLEDB driver coming with the SQL*Net client you have installed.
    As you mentioned this causes a different error:
    Server: Msg 7399, Level 16, State 1, Line 1
    OLE DB provider 'OraOLEDB.Oracle' reported an error. The provider did not give any information about the error.
    OLE DB error trace [OLE/DB Provider 'OraOLEDB.Oracle' IDBInitialize::Initialize returned 0x80004005: The provider did not give any information about the e
    This error is related to the OLEDB process running by default in "out-of-process" mode which doesn't work with Oracle OLEDB driver. By setting a key in the registry under SQL Server this can be changed to run in-process (the default) the provider will work:
         HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSSQLServer\Providers\ORAOLEDB.ORACLE
    Change the value of the key "AllowInProcess" under the "OraOLEDB.Oracle" folder
    to a hexadeciaml value of 1.
    If the key does not exist create it as a new DWORD value.
    See also:
    Article-ID:         Note 260775.1
    Title:              ORA-12560 Attempting to Query the Oracle Database from
                        Microsoft SQL Server's SQL Query Analyzer Using the Oracle
                        Provider for OLE DB                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Oracle warehouse builder error when I execute any mapping

    oracle warehouse builder error when I execute any mapping:
    I have installed OWB successfuly, It still no longer working correctly: it executed all the mappings, but it suddenly becomes incapable to execute any mappings in any project. It validates successfuly the mappings but in the execution it show the message :
    " ora-06550 : ligne1 colonne19..."
    please help me to correct this error.
    thank you.

    Make sure that there is no primary key or index on this table who exceed the limit.
    For more information see
    http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96612/d_wm2.htm#105677

  • How to suppress Oracle Seeded Form Error Message

    I have a requirement to suppress the oracle seeded form error message.
    How this can be done. Can any one please advise?
    Thanks,
    Ananga

    Also, a redirect is possible - look for note 555137.1 in My Oracle Support.
    -Vinod

  • ORA-01034 "ORACLE not available" error

    I've installed oracle8i expert edition on Solaris but I can't start up the database. I keep getting this "ORA-01034 ORACLE not available" error message. I've followed the instructions associated with this error but so far to no avail. Please help me.
    Mohamed

    Hi FK,
    On Windows, it can sometimes mean that the services are not running. I have a check here:
    http://www.dba-oracle.com/t_check_verify_windows_services.htm
    Have you tried using oradim?
    http://www.dba-oracle.com/tips_oradim_utility.htm
    The oradim utility provides more than just the ability to start and stop Windows databases. Windows oradim can create and edit databases. It also allows DBAs to configure script-based installation mechanisms.
    The oradim utility is used on the Windows platform to perform these tasks.
    C:\oracle9i\bin\oradim -startup -sid ORCL92 –usrpwd manager
    -starttype SRVC,INST -pfile C:\oracle9i\admin\ORCL92\pfile\init.ora
    • startup – Indicates that the specified instance should be started.
    • sid – The SID of the database to start.
    • usrpwd – The password for the database user.
    • starttype – Specifies whether to start the instance, the service, or both
    Hope this helps. . .
    Don Burleson
    Oracle Press author

  • Oracle 11g Database Installer - INS-08102 error

    After I click next on Installation option screen, I get the error message [INS-08102] Unexpected error occurred while transitioning from state 'installOptions'
    The details say:
    Cause - No additional information available. Action - Contact Oracle Support Services or refer to the software manual. Summary  - java.lang.NullPointerException
    I get this error regardless of the Installation option I select.
    I am installing it on a windows XP and I am logged on as Administrator. I have the installers on c:\database
    The error log is empty.
    Any ideas or suggestions?

    hiii
    i was also facing the same problem but what i did is uninstalled any previous traces of oracle and deleted oracle folder from program files and it worked fine....

  • Oracle Listener Starting Error

    Hi,
    We are having two AIX 5L Servers (Active-Passvie cluster), Oracle 10g installed on it.
    When we move the cluster the listerner service hangs up..
    I got the error in alert log file.......
    TNS-12531: TNS:cannot allocate memory
    When I enable trace, I found the information as below..
    Error found: Error stack as follow
    id=0
    operation code =65
    ns error=12531
    ns error2=0
    nt generic error = 0
    protocol error=0
    os error=0
    ns & nt translation
    12531, 00000 "tns could not allocate memory"
    //*cause sufficent memory could not be allocated to perform desired activity.
    //* action either free some resource for tns or add more memory to the machine.
    My server hold 16GB of memory, no other process are running.
    My listerner file....
    # Filename......: listener.ora
    # Created.......: created by SAP AG, R/3 Rel. >= 6.10
    # Name..........:
    # Date..........:
    # @(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/LISTENER.ORA#4 $
    ADMIN_RESTRICTIONS_LISTENER = on
    LISTENER =
    (ADDRESS_LIST =
    (ADDRESS =
    (PROTOCOL = IPC)
    (KEY = PRD.WORLD)
    (ADDRESS=
    (PROTOCOL = IPC)
    (KEY = PRD)
    (ADDRESS =
    (COMMUNITY = SAP.WORLD)
    (PROTOCOL = TCP)
    (HOST = 10.0.0.6)
    (PORT = 1527)
    STARTUP_WAIT_TIME_LISTENER = 0
    CONNECT_TIMEOUT_LISTENER = 10
    TRACE_LEVEL_LISTENER = OFF
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PRD)
    (ORACLE_HOME = /oracle/PRD/102_64)
    Can you please give your suggestions on this...
    Regards,
    Vijayaraghavan

    Vijayaraghavan Krishnan wrote:
    I got the error in alert log file.......
    TNS-12531: TNS:cannot allocate memory
    My server hold 16GB of memory, no other process are running.The error say cannot allocate memory - it did not say insufficient memory.
    Jay provided an excellent suggestion on how to isolate the problem (is it caused by a faulty config file?). In addition to that, you also may want to check that the oracle o/s user (or the o/s user owning the listener process) has sufficient privs/quota to allocate and use memory.
    The error could also have been caused by the listener foreground process (that you invoke via the command line) attempting and failing to start the actual listener background process. On Unix based systems, I expect the listener to use the fork() command - and this can return a EAGAIN error that according to man pages mean "+fork() cannot allocate sufficient memory to copy the parent’s page tables and allocate a task structure for the child+". This could be a result of some deeper technical issue at kernel level and not directly related to the actual physical amount of memory available.

Maybe you are looking for

  • How do I report poor service?

    The 4G service along the UP-NW Metra Line from the Cumberland stop in Des Plaines, IL all the way to Ogilvie Transportation Center in Chicago is unacceptably poor. Recently, both data and voice service have been failing between the Jefferson Park and

  • How to delete Yosemite and return to mavericks

    On my Mac Pro desktop I have downloaded the upgrade to Yosemite from Mavericks, now I have no mail and hundreds of pounds worth of software that won't work with this operating system, all my reading lists and links are gone from safari. How do I put

  • I updated to 3.6.8 and now have web page previews in my tabs - how do i get rid of these

    When I upgraded to 3.6.8 all my tabs now are twice the size and have a thumbnail preview of the webpage in them - how do i get rid of these and go back to the normal tabs == This happened == Every time Firefox opened == i upgarded to 3.6.8

  • How to - customize datasource by means of 'Function module'  via 'RSO2' ?

    Wilson, the topic of Function Module extractors is well documented in the forums - please search the forums before posting +__Hi,Expert:__+ +__Could you please kindly advise me how to customize datasource by  'Function module',__+ +__and which aspect

  • PPDS production order dates mismatch between APO and R3

    Hi Friends, We are facing one problem regarding production order date mish match between R3 and APO systems specific to a product. The product is planned in PPDS and the order automatically transfer to R3 through online CIF. PPM has got two operation