Oracle Installation errors on Red Hat AS 2.1

Hi, I've installed Oracle 9i on a Red Hat AS 2.1, but after the installation, when running the Database Configuration Assistant gave this error:
ORA-03113: end-of-file on communication channel
I found an installation guide on http://www.puschitz.com and it recommends you, when this error comes up , to remove the shared memory segments owned by oracle, and i did so, it just couldn't remove on , which chmod was 777..after that i retry the Database configuration assistan and it failed again but telling me a different error happened:
ORA-12571:TNS:Packet writer failure....
And i tried again and got the same error i got in the first place...and so on, and so on....
What can i do????
thanks...
Mario

Hi Paulo,
The problem is in the jre in your $ORACLE_BASE directory. The data in jre is corrupted, you can see the note 230693.1 "Netassist and Dbassist Hanging on RedHat Advanced Server (RHAS)" in metalink, and resolv your problem sure...
Good Luck

Similar Messages

Oracle 9i Installation Error on Red Hat 7.2

Can anyone help me? Im trying to install Oracle 9i on a RedHat 7.2. I always get an error message after executing runInstaller :( is my installer corrupted or something?
./runInstaller: cannot execute binary file
please help, thanks ....

You all have downloaded wrong version of Oracle. better to say ORACLE BINARIES for WRONG PLATFORM.
Do not download
Oracle9i Database Release 2 Enterprise/Standard Edition for Linux/IA64, Release 2 (v9.2.0.2) New
instead of that download
Oracle9i Database Release 2 Enterprise/Standard Edition for Linux
- Alpesh

Oracle Collaboration Suite system compatibility error on Red Hat 3.0 ES

Hello,
I have installed Oracle Collaboration Suite on Red Hat 3.0 Es.i can view the home page of Oracle Real-Time Collaboration ,But during system Compatilbility check, it is showing me the error message as "your system is not compatible with Oracle Web Conferencing. Please look at your system details for more information."
Can anyone please help?
Regards,

What clients are you trying to use to for web conferencing. It sounds like you are trying to use redhat to view. Only windows will work with web conferencing and it has to be the latest and greatest? version of internet explorer.
Ben

How to install oracle developer 10g on red hat 5.3

Dear forum members,
i have to install oracle developer 10g on red hat 5.3 . I am searching on google and metalink but i did not find any doccument.
If somebody has some material or any doccument for this Installation plz help me.
regards

i have fullfilled pre-requisites to install developer 10g on red hat 4.5
i copy the source in "/var/opt/oracle/" Source is in .cpio format.
i unzip this source with cat Disk1.cpio | cpio -icd.
when i run the runINstaller it cant find /var/opt/oracle/..........Disk1/products.xml file.
when i find this file with command find -name 'products*' or find -name '*.xml'
i cant find products.xml.
is there any problem with source
reply

How to install Oracle 10g on to Red Hat Linux 5 Server

I'm new to both Linux and Oracle. I've been working on an installion of Oracle 10g on a Red Hat Linux 5 Server for about 2 weeks. I've been doing a lot of reading about installing Oracle on a Linux environment. I finally got to the installation portion and the Oracle Installer displayed a message that I had to have Red Hat 4 or 4 Enterprise to continue.
How can Install Oracle 10g onto a Red Hat 5 Linux Server"? Is there an option that I can use to bypass the OS checking?
Thanks

Unfortunately there is no way to access metalink without a valid account. You could then just try to skip preinstall requisites with this clause:
./runInstaller -ignoreSysPrereqs
or this method:
Copy the oraparam.ini from the installation source install/oraparam.ini to /tmp directory.
Edit the file /tmp/oraparam.ini so this file reads:
After
[Certified Versions]
Linux=redhat-3,SuSE-9,redhat-4,UnitedLinux-1.0,asianux-1,asianux-2,redhat-5
also, make sure you have these packages installed:
# rpm -ivh gcc-c++-4.1.1-52.el5.i386.rpm gcc-4.1.1-52.el5.i386.rpm
libstdc++-devel-4.1.1-52.el5.i386.rpm glibc-devel-2.5-12.i386.rpm
glibc-headers-2.5-12.i386.rpm libgomp-4.1.1-52.el5.i386.rpm
libXp-1.0.0-8.i386.rpm compat-libstdc++-296-2.96-138.i386.rpm
compat-libstdc++-33-3.2.3-61.i386.rpm
~ Madrid.

Install oracle 9i on Linux Red Hat 8.0 Professional

Hi all,
i need to install oracle 9i on Linux red hat 8.0 professional. I dont know if this platform is certified by oracle and if there are any problem to install that.
Any information will be appreciate.
Thanks in advance
Regards
Giuseppe

HI,
According to Oracle "Unix Installation/OS: RDBMS Technical Forum", it is not supported.
I am pasting the final answer from one of the Oracle Analyst: (Hope it is OK)
From: Oracle, Amit Podder 19-Aug-03 15:14
Subject: Re : Does oracle support 9.2.0.2.0 on Redhat 7.X or 8.0
Hi,
AS of now Oracle Server - Enterprise Edition Version 9.2 is not certified on Red Hat 8.0.
The information on future plans is not published so we are unable to convey any info on the same.
Warm Regards
AMIT

Installing Oracle 9i on Linux Red Hat 7.2

I got the following error when installing Oracle 9i on Linux Red Hat 7.2:
Initializing Java Virtual Machine from /tmp/OraInstall/jre/bin/jre. Please wait...
jre was not found in /tmp/OraInstall/jre/bin/../bin/i586/green_threads/jre
Any ideas how to fix the problem?
Thanks

Try installing 9i on RH 7.1. I don't believe 9i runs under 7.2 due to library incompatibilities.

Uninstall oracle 10g from Linux Red hat

is any body know the standard procedure to uninstall oracle 10g from linux red hat.

The correct answer is "Undo the changes you made during the install"
By this I mean:
Stop all of the processes
Delete the ORACLE_BASE directory (usually the one one level up from ORACLE_HOME)
Delete the oraInventory directory if it isn't inside ORACLE_BASE
Delete /etc/oratab, /etc/oraInst.loc
Delete /user/local/bin/coraenv, /user/local/bin/oraenv, /user/local/bin/dbhome
Undo any environment settings you may have modified (in .bash_profile and bashrc)
That should be just about it. That's how I usually clean out my system between installs.
~Jer

Graphic manager Oracle 9i on linux Red Hat 8.0

I would like to know if someone can help me about the way that i can start the Graphic manager of Oracle 9i on Linux Red hat 8.0, because after i installed Oracle, the manager starts but when I shut down my computer it never appeared again. Can you help me please???

I would like to know if someone can help me about the way that i can start the Graphic manager of Oracle 9i on Linux Red hat 8.0, because after i installed Oracle, the manager starts but when I shut down my computer it never appeared again. Can you help me please???

Installing Oracle 9i database on Red Hat Linux 7.1

Hi,
I have downloaded Linux9i_Disk1.gz, Linux9i_Disk2.gz and Linux9i_Disk3.gz for installing Oracle 9i database on Red Hat Linux 7.1. I unzipped those files to Linux9i_Disk1.cpio, Linux9i_Disk2.cpio and Linux9i_Disk3.cpio. What is the command to extract these .cpio files to get all the associated files that are archived? Can anyone help me on this?
Warm Regards,
Manash Pradhan

Thanks a ton. I am sorry for not checking the download page since the download was done by another person.Thanks again.
Warm Regards,
Manash

Oracle Database 10g on Red Hat Linux Virtual Machine download location?

anyone know where i can download the vmware image of redhat and oracle preinstalled?
its called "Oracle Database 10g on Red Hat Linux Virtual Machine"
i found a reference to it on this page, but the link at the bottom is broken.
http://www.oracle.com/technology/obe/10gr2_db_vmware/htmlfiles/readme_oracleonlnxeval.html
i want to test out oracle on redhat before i install it completely

Please don't cross post on many forums,
check where can i download a vmware image of redhat and oracle preinstalled?

Installation of Oracle AS 10g on Red Hat ES 3.0

Installation of Oracle AS 10g on RedHat ES 3.0 (All issues are cleared and u will b done with no error like Java Configuration Failed and make files errors)
Red Hat Enterprise Linux 3 Custom Installation
Copy from OTN Note
Start
Oracle 10g is certified to run the base release of Red Hat Enterprise Linux 3 (Advanced Server and Enterprise Server) without updates. If you have update CDs, you can use the boot CD from the update instead of the boot CD from the base release to automatically apply all updates during the installation. All updates from Red Hat are supported by Oracle.
1.     Boot the server using the first CD.
o     You may need to change your BIOS settings to allow booting from the CD.
2.     The boot screen appears with the boot: prompt at the bottom of the screen.
o     Select Enter to continue with a graphical install on the console. (For other installation methods and options, refer to the Red Hat Installation Guide.)
o     The installer scans your hardware, briefly displays the Red Hat splash screen, and then begins a series of screen prompts.
3.     Language Selection
o     Accept the default.
4.     Keyboard Configuration
o     Accept the default.
5.     Welcome Screen
o     Click on Next.
6.     Mouse Configuration
o     Accept the default.
7.     Installation Type
o     Select Custom.
8.     Disk Partitioning Setup
o     A thorough treatment of disk partitioning is beyond the scope of this article, which assumes that you are familiar with disk partitioning methods.
(WARNING: Improperly partitioning a disk is one of the surest and fastest ways to wipe out everything on your hard disk. If you are unsure how to proceed, stop and get help, or you will risk losing data!)
This article uses the following partitioning scheme, with ext3 for each filesystem:
The 9GB disk on the first controller (/dev/sda) will hold all Linux and Oracle software and contains the following partitions:
- 100MB /boot partition
-1,500MB swap partitionâSet this to at least twice the amount of RAM in the system but to no more than 2GB (32-bit systems do not support swap files larger than 2GB). If you need more than 2GB of swap space, create multiple swap partitions.
-7,150MB root partitionâ This partition will be used for everything, including /usr, /tmp, /var, /opt, /home, and more. This was done purely to simplify installation for the purposes of this guide. A more robust partitioning scheme would separate these directories onto separate filesystems.
9.     Boot Loader Configuration
o     Accept the default.
10.     Network Configuration
o     It is usually best to configure database servers with a static IP address. To do so, click on Edit.
o     A pop-up window appears. Uncheck the Configure using DHCP box, and enter the IP Address and Netmask for the server. Be sure that Activate on boot is checked, and click on OK.
o     In the Hostname box, select manually and enter the hostname.
o     In the Miscellaneous Settings box, enter the remaining network settings.
11.     Firewall Configuration
o     For the purposes of this walk-through, no firewall is configured. Select No firewall.
12.     Additional Language Support
o     Accept the default.
13.     Time Zone Selection
o     Choose the time settings that are appropriate for your area. Setting the system clock to UTC is usually a good practice for servers. To do so, click on System clock uses UTC.
14.     Set Root Password
o     Enter a password for root, and enter it again to confirm.
15.     Package Group Selection
o     Select only the package sets shown here. Leave all others unselected.
o     Desktop
- X Window System
- Gnome
- KDE
- See my comments in the RHES 2.1 section regarding choice of GUI.
o     Applications
- Editors
- Graphical Internet
o     Servers
- Do not select anything in this group.
o     Development
- Development Tools
o     System
- Administration Tools
o     Red Hat Enterprise Linux
- Do not select anything in this group.
o     Miscellaneous
- Legacy Software Development
o     Click on Next to proceed.
16.     About to Install
o     Click on Next.
17.     Installing Packages
o     Software will be copied to the hard disk and installed. Change disks as prompted, and click on Next when the installation is complete.
18.     Graphical Interface (X) Configuration
o     Accept the defaults unless the installer does not recognize your video card. If your video card is not recognized, you will not be able to continue.
19.     Monitor Configuration
o     Accept the default if the installer correctly identifies your monitor. Otherwise, select a compatible monitor from the list.
20.     Customize Graphical Configuration
o     Accept the defaults.
21.     Congratulations
o     Remove the installation media from the system, and click on Next.
22.     The system automatically reboots and presents a new welcome screen.
o     Click on Next.
23.     License Agreement
o     Read the license agreement. If you agree to the terms, select Yes, I agree to the License Agreement and click on Next.
24.     Date and Time
o     Set the Date and Time.
o     If you want to use an NTP server (recommended), select Enable Network Time Protocol and enter the name of the NTP server.
25.     User Account
o     Create an account for yourself.
o     Do not create an account for oracle at this time. Creating the oracle account is covered later in this section.
26.     Red Hat Network
o     If you want to use or activate your Red Hat Network account now, accept the default, click on Next, and follow the product activation instructions that accompanied your Red Hat product.
27.     Additional CDs
o     Click on Next.
28.     Finish Setup
o     Click on Next.
29.     A graphical login screen appears.
30.     Congratulations! Your Linux software is now installed.
End of OTN Note
Now just install compat-db-4.0.14-5.i386.rpm
Gnome-libs-1.4.1.2.90-34.1.i386.rpm
Libpng10-1.0.13-8.i386.rpm
ORBit-0.5.17-10.4.i386.rpm
Install patch 3006854
Copy libcwait.so file from /etc to /lib
And make links
mv /usr/bin/gcc     /usr/bin/gcc323
mv /usr/bin/g++     /usr/bin/g++323
ln âsf /usr/bin/gcc296     /usr/bin/gcc
ln âsf /usr/bin/g++296     /usr/bin/g++
Kernel Settings as per requirement of ORACLE AS 10g in /etc/sysctl.conf
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
kernel.sem = 256 65000 200 256
fs.file-max = 131072
net.ipv4.ip_local_port_range = 1024 65000
kernel.msgmnb=65556
kernel.msgmni=4096
Then restart the computer
Login with Oracle user
now path setting as
I have done this by make two environment files
Infra.env
TMP=/tmp
Export TMP
TMPDIR=$TMP
Export TMPDIR
ORACLE_BASE=/oracle
Export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/appsrv/infra
Export ORACLE_HOME
ORACLE_SID=asdb     (if u will not define SID here then while starting database u will face an error ORA-07217:sltn:environment variable cannot be evaluated)
Export ORACLE_SID
PATH=/usr/bin:/usr/sbin
Export PATH
PATH=$PATH:$ORACLE_HOME/bin     (u can include command paths like dcm as u needed)
Export PATH
LD_ASSUME_KERNEL=2.4.19
Export LD_ASSUME_KERNEL
Copy this file with name as.env and change ORACLE_HOME from infra to as.
. ./infra.env
DISPLAY=localhost:0.0; export DISPLAY
Xhost +
Now u can check that DISPLAY is ok by run the command xclock if clock appears then ok else set DISPLAY with root user ok
Start installation from CD 1 .
. ./runInstaller
Press Y               (There is no need to disturb, upgrade, degrade any package)
Press Y
Installation will start while installing and reaches at ~50% then go to /oracle/appsrv/infra/bin open relink file and change at line # 50 i.e. remove 2 brackets
] âo [ and at line # 102 make= /usr/ccs/bin/make to /usr/bin/make remove ccs and save the file
There will no error in installation in infrastructure
Same as done with relink file in Middle tier installation. I would like to turn ur attention for a serious problem no one asked about it. Here u have seen that a script make 3 file in /usr/local/bin for infrastructure and middle tier when u finished infrastructureâs installation plz rename that 3 files as
Mv coredb coredb-infra
Mv dbhome dbhome-infra
Mv ora     â¦     oraâ¦-infra
If u overwrite that files by creating same name of middle tier files no problem.
When problem comes?
AS will work fine but when u have to install patches on AS then problem comes if u have overwrite that files. So plz rename them before creation of same files of middle tier. Thanx
Zeeshan
@CES
[email protected]

Hi,
I tried uname -a and it returns the following:
Linux NLABLINUX 2.4.21-20.EL.c0 #1 Thu Sep 9 02:07:03 EDT 2004 i686 i686 i386 GNU/Linux
We have the following problems:
1. I am having a box running RHEL 3.0 (got from centos.org). I have Oracle 10g running ok. Now I tried to install ASMLIB downloaded from technet. The files are:
rpm -Uvh oracleasm-2.4.21-EL-1.0.3-1.i686.rpm \
     oracleasmlib-1.0.0-1.i386.rpm \
     oracleasm-support-1.0.3-1.i386.rpm \
When I tried to install these files, I got the following error:
Checking for Red Hat enterprise kernel: [FAILED]
Also when I try to run /etc/init.d/oracleasm , I get the same error
Checking for Red Hat enterprise kernel: [FAILED]
2. We created 4 raw partitions /dev/raw/raw1 - 4 using raw command.
[root@rcdell root]# ls -l /dev/raw/raw[1,2,3,4]
crw-rw---- 1 oracle dba 162, 1 Sep 9 11:05 /dev/raw/raw1
crw-rw---- 1 oracle dba 162, 2 Sep 9 11:05 /dev/raw/raw2
crw-rw---- 1 oracle dba 162, 3 Sep 9 11:05 /dev/raw/raw3
crw-rw---- 1 oracle dba 162, 4 Sep 9 11:05 /dev/raw/raw4
then tried this:
SYS at +ASM on 29-DEC-04 >create diskgroup dg1 normal redundancy
2 failgroup c1 disk '/dev/raw/raw1'
3 failgroup c2 disk '/dev/raw/raw2';
create diskgroup dg1 normal redundancy
ERROR at line 1:
ORA-00600: internal error code, arguments: [kfdsk::grpmatch], [1],
[3939617408], [], [], [], [], []
ORA-00600: internal error code, arguments: [kfgrpJoin2], [5], [], [], [], [],
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
Any help is appreciated.
Irshad A. Buchh
Senior Principal Consultant

Oracle 8i/9i and Red Hat Linux version

Hi,
Does anyone know, which is the earliest version of Red Hat Linux
supported by Oracle 8i or 9i?
Regards

Hi,
I downloaded the 9i, the installation started ok and I was
able to complete the install procedure, but a few things did not
go as I planned:
1.- The installation MUST be run on the console X, and cannot
be run from a remote terminal (odd!).
2.- On a 2-CPU machine the installation didn't install all the
files for the sistem to start.
3.- During a second attempt the installer issued an error
regarding a compilation problem.
Can anyone help me, I can't get the installer running without
problems.

Oracle 8i Internet for Red Hat Linux

Hi all,
Can any one help me on this. I have setting up Red Hat Linux 6.2 and JRE 1.1.6v5-glibc also installed on /usr/local/jre directory. But when I try to run "runInstaller" from the oracle cdrom. I have the following error:
Initializing Java Virtual Machine from /usr/local/jre/bin/jre Please wait ...
Error in Create OUIProcess(): -1
:Bad address
Any one can tell me what is the problem.
Thank you

Let me try again. I was to fast with the enter key. There is a known bug with the installer. The work around is to use the runInstall.sh that is in the subdirectory /install/linux. If you have your environment variables setup correctly this should work, also you need a minimum of 128 meg of ram on the machine.
Hope this helps.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by hhtham ():
Hi all,
Can any one help me on this. I have setting up Red Hat Linux 6.2 and JRE 1.1.6v5-glibc also installed on /usr/local/jre directory. But when I try to run "runInstaller" from the oracle cdrom. I have the following error:
Initializing Java Virtual Machine from /usr/local/jre/bin/jre Please wait ...
Error in Create OUIProcess(): -1
:Bad address
Any one can tell me what is the problem.
Thank you<HR></BLOCKQUOTE>
null

Installing oracle 10g R2 on Red Hat AS4 update 6

Has anyone been able to get 10g R2 to install on Red Hat AS 4 u6?
I have had errors on both the 64 bit version and the 32 bit version.
32 Bit Version
The 32 bit version useing the 32 bit version of oracle 10g r2 (10.2.0.1) displays this error: Enterprise manager configuration failed due to the following error - Invalid value null for parameter PORT.
The log states:
CONFIG: SQLEngine connecting with SID: murasaki, oracleHome: /opt/oracle/product/10.2.0/db_1, and user: DBSNMP
May 2, 2008 8:56:11 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
May 2, 2008 8:56:11 AM oracle.sysman.emcp.EMConfig perform
SEVERE: Invalid value null for parameter PORT
Refer to the log file at /opt/oracle/product/10.2.0/db_1/cfgtoollogs/dbca/murasaki/emConfig.log for more details.
May 2, 2008 8:56:11 AM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Invalid value null for parameter PORT
at oracle.sysman.emcp.ParamsManager.checkParam(ParamsManager.java:2630)
at oracle.sysman.emcp.EMDBPreConfig.checkConfigParams(EMDBPreConfig.java:1285)
at oracle.sysman.emcp.EMDBPreConfig.checkParameters(EMDBPreConfig.java:1060)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:174)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:160)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:141)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:426)
at java.lang.Thread.run(Thread.java:534)
64 Bit version
The 64 bit versions spits out unable to make "install" various different files anywhere between 62% to 68% completed.
unfortunately i dont have more information on the error at this time. I have all the development packages installed.
any help would be greatly apreciated as i am getting no where with google and searching various forums.

Please check on this link.. that may help you.
http://www.puschitz.com/InstallingOracle10g.shtml
--Girish

Oracle Installation errors on Red Hat AS 2.1

Similar Messages

Maybe you are looking for