Oracle installation for Win NT

I went into follwoing link..
http://otn.oracle.com/software/products/8i_personal/htdocs/winsoft.html
Downloaded following
Oracle8i Personal Edition Release 3 Version 8.1.7 for Windows NT/2000
Download the Complete File
nt817personal.zip (612,139,274 bytes)
Directions
Download Oracle8i Personal Edition in ZIP format
Unzip nt817personal.zip into a directory.
When I tried to open it does not open in ZIP file.
Asking me to download again ...
Whats going on??
Thanks for any response.

Well, the 10g problem seems pretty straightforward. You need 45 Mb of free disk space, but you only have 30 Mb free. You'll need to free up some space or move your TEMP directory.
After you install JRE version 1.3.1, what error does the 9i installer throw?
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Similar Messages

Problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT

Hello!
I have problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT (PSK30E-02T002B3) with no OS preinstalled.
I do the following:
1. Install Windows 7 x64, SP1.
2. Install LAN driver (device was not recognized by Windows 6) (downloaded from [http://se.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=SE&LNG=26&userAction=S MP_RESULTS_PAGE&partNumber=PSK30E-02T002B3&serialNumber=&USER_ACTION=Serial%20number])
3. Install all Windows Updates from Microsoft
4. Run Toshiba Software Installer for Win 7 - it installs a couple of drivers and then asks to reboot.
Here is the log file for the first try (win7update.log):
Update started 12\28\2011 at 21:11
Installed TVALZ_O.INF
Installed IO & Memory Access Driver
driver_bluetooth_TC00241200A.exe /s /log /test has been installed with the result code of PASS
util_tvap_TC00215000H.exe /s /log /test /wait15 has been installed with the result code of PASS
Update completed at 21:29
After reboot I run it again and the result is:
Update started 12\28\2011 at 21:38
Toshiba Bluetooth stack has already been installed.
Toshiba Value Added Package has already been installed.
Update completed at 21:40
Any help is appreciated!
Thanks in advance!

You are right this notebook model was delivered without OS.
Win7 64bit is supported for this notebook model and all necessary drivers, tools and utilities are available on Toshiba download page.
What I can say is that all this stuff must be installed in right install order. I know it sounds stupid now but I recommend you to make clean OS again and continue installation following this installation order:
Win7 SP1
Intel Chipset SW Installation Utility 9.2.0.1015
TOSHIBA Supervisor Password Utility 4.8.6.0
TOSHIBA HW Setup Utility 4.8.6.0
TOSHIBA Bulletin Board V2.1.10
TOSHIBA ReelTime 1.7.17.0
Intel Management Engine Interface 7.0.2.1164
NVIDIA Display Driver 8.17.12.6669
Intel Rapid Storage Technology Driver 10.1.2.1004
TOSHIBA Value Added Package 1.5.4.64
USB3.0 Driver 2.0.32.0
NVIDIA HD Audio Driver 1.1.13.1
Conexant Audio Driver 8.51.1.0a
Intel Wireless LAN Driver 14.0.2.2.1.s64_wCAT
or
Atheros Wireless LAN Driver 9.2.0.206.0.s3264_wCAT
or
Realtek Wireless LAN Driver 2.00.0013
TOSHIBA Wireless LAN Indicator 1.0.3
Synaptics Touch Pad Driver 15.2.11.1
TOSHIBA Software Modem 2.2.97(SM2297ALS05)
Conexant Modem Driver 7.80.4.53
TOSHIBA HDD Protection 2.2.1.12
Atheros Bluetooth Filter Driver Package v1.0.7
Bluetooth Stack for Windows by Toshiba v8.00.04(T)
Atheros LAN Driver 1.0.0.46
Realtek Card Reader 1.0.0.12
TOSHIBA Sleep Utility 1.4.2.7
TOSHIBA Face Recognition V3.1.8
TOSHIBA eco Utility 1.2.25.64
Intel Proset 14.0.2.0.1.s64_wCAT
Intel Wireless Display 2.0.29T
TOSHIBA HDD_SSD Alert 3.1.64.7
TOSHIBA Service Station V2.1.52
TOSHIBA PC Health Monitor 1.7.4.64
ConfigFree 8.0.37
TOSHIBA Web Camera Application V2.0.0.19
TOSHIBA Network Device ID Registry Setting Tool 3.0.32.4-14_wMSI
TOSHIBA Media Controller 1.0.86.2
TOSHIBA Media Controller Plug-in 1.0.6.1
PatchFiles$$2 PCIIDEREG-1.2
PatchFiles$$3 TosVolRegulator_x64_1.1
It is very important to use right installation order.
Please post some feedback.

Where from I unload the intalador of oracle 9i for win 2003 R2 64 bits

Hi,
They know the link in OTN to unload the Oracle 9i for Win 64 bits.
Thank you for the given help.
Andres.

According to Oracle Certify, only the 32bit version of Oracle9i is available for Windows 64bit OS.

Oracle Installation for Production Environment.

Hi All,
We need to install Oracle in our production environment.
But since there is no DBA in our project, we need to do it by ourself.
I was just wondering what all steps and cautions I need to take to install it.
I was told just double click on Setup.exe :-) and that would suffice.
I am pretty sure its not that easy, atleast for a production environment.
We might need to set some params, may be.
We are at present using Oracle 10g Rel 1.
Any help/suggestion would be highly appreciated.
Thanks in Advance,
Tanuja

Well, it does more complicate than a double click of setup.exe, especially for a production database.
It's not only about the installation, also think about how do you want to create your database, the storage configuration, database configuration, and backup/recover strategy etc.
For installation, make sure you follow Oracle installation guide,
http://download.oracle.com/docs/html/B10130_02/toc.htm
And there are many other document here
http://www.oracle.com/pls/db10g/portal.portal_demo3?selected=1

Creating an installer oracle installer for my project

I want to make an oracle db installer for my program. When it is executed it should be able to search the tnsnames.ora and list the services in combo box. Up to this it is finished
Now, I want to:
1. logging to the service with login id and password :
2. after successful login all the users under the service should be listed. I can either choose the existing user or create a new user with sufficient rolls.
3. after that I want to execute scripts for creating tables etc. These scripts are stored in separate folder.
I am coding in VC++ 6. How will I write functions which perform the above tasks?

You can use v$tables to Qry the active users.
You should have enough previlage to create the users
I think this is DBA related task.

Complete preview installation for win xp?

There is currently a sneak preview installation available for windows 2000/2003 server. Is there anything available for windows xp (complete with portal installation, j2ee etc.)?
Regards,
Hilde

XP is not a supported platform for portal etc install - so you are going to find nothing.
Saying that EP6stack09 will install - its a bit bumpy in the install but will eventually work. KMC is another story - it won't finish the install.

Is there a oracle 9i for win 2003

is there any oracle to be installed on windows 2003.
the site is not very clear.

Which Windows 2003 (x86 or Itanium or AMD64/EM64T)?
Check metalink.

Error in Oracle Installation for NW2004s

I am in the proces of installing NW2004s in AIX Oracle machine.
When i was instlaling Oracle database, it gave me some re-linking errors and i ignored it and completed oracle instalation successfully.
But now when i am runing the sapinst, i am getting erorrs in database creation.
I searched soem forums and executed $ORACLE_HOME/bin/relink al
my oracle_home is set to /oracle/DBW/102_64

Whats the error you are getting ? You should have resolved the issue at the first place ..
Alf
oracle home is
ORACLE_HOME=/oracle/<SID>/102_64
Thanks
Prince Jose

Oracle db / schema installation for BO

Dear Experts,
I am going to do the BO Setup in our landscape,
Can any one suggest me how to do the following....
1. How to do the Oracle installation for BO in AIX (UNIX)? Is it a normal installation? or different?
BOE is on Windows.
2. How to do the sizing of database?
3. How to create a database schema in oracle with proper parameters?
4. What are the parameters we have to maintain in Oracle - init.ora file which is required for BO ?

Dear
Please check the installation guides on SAP service marketplace
[http://service.sap.com/installationguides]
There are some specific points that depend on which BO you will install but those are mentioned in the installation guide for BO per database (Oracle, MySQL and so on).
For Oracle you have to perform a database installation as mentioned in the installation guide for Oracle on SAP service marketplace.
The general parameter recommendations for Oracle (SAP note) will also be valid for BO I assume as it's Oracle release dependant and not SAP Software dependant, only point is whether or not its OLTP or OLAP that is used.
Kind regards
Tom

Y2K bug in Oracle installer = v3.3.1.1.???

In newsgroup comp.databases.oracle.misc
I've read the following messages:
I've heard about a Y2K-Bug in the common Oracle-Installer for
NT. It was said, that installing any Oracle-product after the 1/1/2000
will cause system-errors and you will need to reinstall the operating
system. Is this true or is it nonsens? Does anybody know something
about it?
Yes, there is a Y2K-Bug in the Oracle Installer (v3.3.1.1.0 und
niedriger) You can download a Y2K-compliant Version
from http://metalink.oracle.com
Questions:
Does this bug really exists ?
Does it affects only NT or Windows95/98 as well ?
The Developer 6 Server, which you can download to date from Technet, contains an Oracle Installer with version >3.3.1.1 ??
How to handle the Y2K compliant version ?? (e.g: overwrite the existing version)
What is the size (in MB) of this Y2K compliant version ?
Any comments will be appreciated.
Thanks in advance
Martin Vonk

Well, heres my test (10g, for I dont have a 9.2.0.1.0, but I think it´d show the same result):
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
SQL> select *
2 from t1;
ENO ENAME
1 KARTHIK
SQL> select *
2 from t2;
DNAME
VENKATRAMAN
SQL> select *
2 from t1
3 where eno in (select eno from t2);
ENO ENAME
1 KARTHIK
SQL> alter table t2 add (eno number);
Table altered.
SQL> select *
2 from t1
3 where eno in (select eno from t2);
no rows selected
SQL> alter table t2 drop (eno);
Table altered.
SQL> select *
2 from t1
3 where eno in (select t2. eno from t2);
where eno in (select t2. eno from t2)
ERROR at line 3:
ORA-00904: "T2"."ENO": invalid identifier
SQL>
But he is getting output of table T2 too se his last postI don´t think so, because he didn´t SELECT it. Would be nice to just copy & paste the output...
Regards,
Gerd

Automated installation for 8.1.6 ?

Is there some way to invoke the Oracle
installer ( for custom installation) using
a response file to provide answers to the
prompts ? instead of interactive, I would
like to automate somehow.

You can use runInstaller with the -silent option, this should do the trick

Oracle Installer or Universal Installer

We are upgrading from forms 4.5 to 6, so do we also have to upgrade from Oracle Installer to the Universal Installer? As we currently use Oracle Installer for deployment of code to the end users PC. Many Thanks

Forms 6.0.5 (Forms 6) and Forms 6.0.8 (6i) are both packaged for the old oracle installer (ORCA) and can be installed with the Oracle installer. If you want to use the universal installer you need to install the product, then add all of the files to file groups in the software packager, track all of the registry entries and add these then create a jar file for the universal installer.
PT

Preferred Oracle download for Oracle certification lab.

My objective is to earn Oracle database administrator certification(s), Associate, Professional, Master. I own a new SUN SPARC workstation. I want to install Oracle on my SUN workstation. I will use the Oracle installation for hands on learning. From the Oracle web site, product editions section, the available editions are; Personal, Standard, and Enterprise. On the Oracle software download section I found Oracle9i Database, Oracle9i Lite, and Oracle9i Personal, in addition to other downloads. Of all the available products which download is the product of choice for building my Oracle lab.
Thank you in advance for your guidance.
Michael Ciaccio, B.Sc.
SUN Microsystems Certified Programmer, JAVA 2 platform
SUN Microsystems Certified Developer, JAVA 2 platform
SUN Microsystems Certified Web Component Developer, JAVA 2 Enterprise Edition (J2EE) platform

Choose Oracle 9i Database Entreprise Edition
Fred

Oracle Installation or Uninstallation Solutions For Windows 95/98/2000/ME/NT/XP

You must read carefully the following steps here. If you previously installed any Oracle's products on your machine, I strongly recommend you to clean up thoroughly before install the new products.
================================================================
Uninstallation
The easiest way to remove ALL traces of Oracle software, for an 8i installation, is:
(1) Using regedit, remove the key \\HKEY_LOCAL_MACHINE\\SOFTWARE\ORACLE.
(2) Remove all the Oracle services (usually called Ora-something) from \\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services.
(3) Go to the ORACLE_HOME directory (usually C:\Oracle\Ora81). Go to the BIN directory beneath this. Rename the file OCIW32.DLL to something like OCIW32.OLD.
(4) Reboot your box.
(5) Once you have logged on again, delete the directories C:\Program Files\Oracle and C:\Oracle.
(6) Right-click on My Computer, select Properties->Environment. Edit the environmental variable PATH to remove all refernces to files in the two directories you have just deleted.
(7) Remove the Oracle folders from your Start menu.
*** Obviously, using regedit on your machine always entails risks, and I won't be held responsible if you end up trashing your system. However, the above procedure is one I have used many times with complete success. You have been warned! ;) ***
As to logging on, the "standard" Oracle accounts are:
SYS/change_on_install (SYSDBA - database owner)
SYSTEM/manager (Owns various VIEWs and utility PACKAGEs)
and (optionally):
SCOTT/tiger (Training account containing some sample tables)
If you're using PO8i on the local machine, you shouldn't need to worry about setting up NET*8 (Oracle's networking protocols)
=================================================================
Windows 95 and 98
This will remove all Oracle products, Oracle services, and Oracle registry entries from your computer.
Complete the following steps to create a Clean Machine. Backup any relevant databases before proceeding!
On Windows 95 and Windows 98:
1. Ensure you shutdown your Oracle. Right click on the Oracle Icon in the toolbar and click on the shutdown option.
2. Un-install all your Oracle products if possible. Use universal installer to do that. Ignore this step if you dont have universal installer on your machine.
3. In regedit, go to HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE.
4. Delete the ORACLE key.
5. Edit your AUTOEXEC.BAT file and remove your %ORACLE_HOME%\bin and JRE paths from the path setting.
6. From the Windows Explorer (or from the command prompt), delete the Oracle directory (Oracle Base).
7. Delete <system_drive>:\Program Files\Oracle (from the Windows NT Explorer or from the command prompt).
8. Delete Icons from <system_drive>: \Windows\Start Menu\Programs\Oracle - <HOME> and <system_drive>:\Windows\StartMenu\Programs\Oracle Installation Products. Where <HOME> is the previous HOME name.
9. Reboot your computer.
On Windows NT:
1. Ensure you are logged in as a user with Administrator privileges.
2. Stop all Oracle Services through Control Panel Services. Use universal installer to un-install your Oracle products. Ignore un-install if you dont have universal installer on your machine.
3. Using regedit (at the command prompt, type regedit), go to HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE and delete the ORACLE key.
4. Open HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services, and remove all keys under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services that begin with ORACLE.
5. Open HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Application, and remove all keys under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Application that begin with ORACLE.
6. Close regedit.
7. From the Control Panel, open System.
8. If JRE was installed by Oracle, remove the %ORACLE_HOME%\BIN path and the JRE path. For example, you may see a path similar to this one: C:\ORACLE\ORAxx\BIN;G: \Program Files\Oracle\jre\1.1.7\bin. Go to Start > Control Panel > System > Environment tab. Click on the system variable path and modify the path.
9. Delete Icons from <system_drive>:\Winnt\Profiles\All Users\Start Menu\Programs\Oracle - <HOME> and <system_drive>:\Winnt\Profiles\All Users\Start Menu\Programs\Oracle Installation Products. Where <HOME> is the previous HOME name.
10. Delete <system_drive>:\Program Files\Oracle (from the Windows NT Explorer or from the command prompt).
11. Reboot your computer.
12. Delete all ORACLE_BASE directories (You can find the Oracle homes listed in HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\ORACLE_HOMES).
================================================================
Doc ID:
Note:131299.1
Subject:
Oracle Installer 8.1.X Hangs on Machines with Pentium 4
Processors
Type:
ALERT
Status:
PUBLISHED
Content
Type:
TEXT/PLAIN
Creation
Date:
02-JAN-2001
Last
Revision Date:
18-APR-2001
This alert was modified 16-January-2001 by specifying specific
Oracle Universal
Installer Versions in the the Versions Affected section.
Oracle Universal Installer (OUI) for 8.1.x Hangs on Machines
with Pentium 4
Processors
~~~~~~~~~~~~~~~~~~
Versions Affected
~~~~~~~~~~~~~~~~~
Oracle 8.1.5
============
Oracle Universal Installer 1.6.0.9.0
Oracle 8.1.6
=============
Oracle Universal Installer 1.7.0.19.0
Oracle 8.1.7
==============
Oracle Universal Installer 1.7.1.9.0
Platforms Affected
~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000
and NetWare platforms are confirmed to be affected.
Description
~~~~~~~~~~~
When installing Oracle Products with the Oracle Universal
Installer (8.1.x)
on machines that use the Sun JRE and Symmantec JIT, the
installer hangs.
Specifically for the Windows platform, the following version
of the Symmantec
JIT or earlier will encounter the failure:
Symantec Java! JustInTime Compiler Version 3.10.107 for JDK
1.2.
Details regarding this issue can be found at:
http://developer.intel.com/design/processor/future/manuals/knowni ssue.htm
How to determine if you have Symmantec Java for JDK 1.2:
1. Select the file "symcjit.dll" and right click on it.
2. Select Properties, then the Version tab.
3. Under Microsoft Windows*, the properties of the DLL are:
"Symantec Java! JustInTime Compiler Version 3.10.107 for
JDK 1.2 Copyright (C)
1996-99 Symantec Corporation Dynamic Link Library file".
DLLs older than this will also not work. "
Likelihood of Occurrence
~~~~~~~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000 and NetWare platforms are confirmed to be
affected.
Possible Symptoms
~~~~~~~~~~~~~~~~~
The failure typically is that the affected application simply
terminates.
Workaround
~~~~~~~~~~
Not only will OUI be affected by this bug, most of the
post-install
configuration tools will also be affected. Running these
tools with "-nojit"
specified will avoid the hang, but it is not simple to specify
"-nojit" for
some of the products.
The following workaround works for the Windows operating
system:
a. Copy only the install directory from the CD to the hard
disk ,say, e:\temp.
b. Open oraparam.ini and make the following modifications
(Assuming CD
drive is f:)
* Change the "SOURCE=" line to use the full path to the CD
instead of a
relative path. (i.e., SOURCE=f:\stage\products.jar)
* Change the "JRE_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
JRE_LOCATION=f:\stage\Components\oracle\swd\jre\1.1.7\1\DataFiles
\Expanded)
* Change the "OUI_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
OUI_LOCATION=f:\stage\Components\oracle\swd\oui\1.6.0.9.0\1\DataF
iles\Expanded
* Change the "JRE_MEMORY_OPTIONS" line to add "-nojit" as the
first argument.
(i.e., JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m)
^^^^^^
* Other entries should remain the same
c. Launch setup.exe from the temporary location on your hard
drive (i.e.
e:\temp\install\win32\setup.exe). This will use the
modified
oraparam.ini and pick up the information from the CD since
the absolute
locations are specified.
Choose a Custom install and choose not to create a database
during the
install. This way, the Database Configuration Assistant will
not be launched
during installation.
The Net8 Configuration Assistant will still be launched, and
there is no way
to suppress it. You will need to kill the Net8 Configuration
Assistant if it
hangs due to the bug. The installation still will have been
successful, and
you can run the DBCA and NetCA after installation.
To kill NetCA if it hangs during installation:
In the "Configuration Tools" window, highlight the "Net8
Configuration
Assistant" and click "Stop". If that does not work, look for
the most recent
JRE process using the Task Manager, and kill it manually.
NOTE: the OUI
itself will also have a jre process. Be sure to kill the one
with the most
recent date, which should be the jre process being used for
Net8CA, not the
one for OUI itself.
After killing the configuration tools and continuing through
the installation
to the "End of Installation" screen, you should modify the
configuration tools
to use "-nojit", then call the appropriate tools from the
Start Menu.
Once installation is complete, each of the following files in
the ORACLE_HOME
needs to be modified:
assistants\dbca\dbassist.cl
assistants\dbma\dbmig.cl
assistants\ifa\ifa.cl
bin\elogin.cl
bin\owm.cl
ldap\oidamdin\oidadmin.cl
network\tools\netasst.cl
network\tools\netca.cl
owm\install\instelogin.cl
owm\install\instowm.cl
Edit the contents of the above files to add "-nojit" as shown
below:
Command=("C:\Program Files\Oracle\jre\1.1.7\BIN\JREW" -nojit
-classpath ....
this is the only thing you need to add --> ^^^^^^
Then, launch the necessary tools, like Net8CA and DBCA from
the Start Menu.
Patches
~~~~~~~
Currently there is not a patched installer available to deal
with this
problem, the workaround listed above must be used.
References
~~~~~~~~~~
[BUG:1507768] INSTALLER FAILS WHEN RUNNING ON NEW PENTIUM 4
(IV) PROCESSORS
[BUG:1507946] INSTALLER FAILS WHEN RUNNING ON NEW INTEL
PENTIUM 4 (IV) PROCESSORS
@[BUG:1518935] SYMCJIT.DLL DOESN'T WORK WITH THE NEW P4
PROCESSORS
Oracle
Support Services.
Copyright (c) 1995,2000 Oracle Corporation. All Rights
Reserved. Legal Notices and Terms of Use.
================================================================
The solution of making a local copy of the installation CD on
the hard disk and renameing symcjit.dll to symcjit.old does
work to allow installation of Oracle Client 8.1.7 on a Pentium 4
This function is useful and you can find two file to rename
===============================================================
Windows ME
Solution to the installation of Oraclei8.1.7 PE in Windows Millennium
Oracle does not support installing version 8.1.7 PE into
Windows Millennium.
As an unsupported workaround, you may add the following line
to the [compatibility95] section of win.ini prior to
installation:
Jrew=0x00080000
After setup is complete, Oracle will recommend a reboot.
There is one additional step necessary prior to reboot;
Oracle may add a non-standard path statement to the
autoexec.bat file. Please modify this SET PATH
statement to use short-filenames if you find a quoted
LFN string represented as part of the path. You can
confirm that the path was merged successfully into the
registry after reboot by examining the PATH variable
in the registry at
HKLM\System\CurrentControlSet\Control\SessionManager\Environment
Symptoms of a missing Oracle path statement in the registry are that Net8 Easy Config will not launch.
Please note that Oracle does not support the use of this
product in Windows ME, but have authorized these workarounds
for testing purposes only.
===============================================================
Windows XP Home Edition
Oracle 8i is not certified on windows XP. Even if yes, it must be Windows XP Professional.
You can install Oracle8i on windows XP Home Edition, try like this:
1 - Copy your Oracle CD into hard disk in your
machine. For example Copy from oracle8i CD into C:\Oracle\ ...
2 - Search the two files named Symcjit.dll on the D drive (where you have copied Oracle8i. You can found them in (example):
C:\Oracle\stage\Components\oracle.swd.jre\1.1.7.30\1
\DataFiles\Expanded\jre\win32\bin\symcjit.dll
3 - Rename this file (Example): symcjit_back.dll (make sure to find two files and rename them)
4 - Execute the Oracle setup.exe from C:\Oracle\setup.exe
===============================================================
When Oracle 8i dies on the install or the installer hangs, here is the fix for this, make sure that you have Service Pack 2 installed.
1. \JRE\1.3.1\ From Sun. (You can download java program at http://java.sun.com/products/jdk/1.1/jre/download-jre-windows.html)
2. Install the java file.
There is also a problem in the installation disk.
3. Make a copy of the Oracle 8i disk on the local hard disk.
4. Do a search for the two files called symcjit.dll and rename them for example: symcjit.old.
5. Install Oracle from the win32 directory.
================================================================
PLEASE NOTE THAT ORACLE DOESN'T SUPPORT THE USE OF THOSE PRODUCTS IN WINDOWS ME, BUT HAVE AUTHORIZED THESE WORKAROUNDS FOR TESTING PURPOSES ONLY
Best Regards,
Beau Leo

Hi,Beau Leo, I am having problem installing Oracle9i Database Rel.2 on my pc.
I read the suggestion and solution you posted for fixing Oracle 8.1.x installation
probblem, and since my pc also hung at 48% while installing Oracle 9i software,
I wonder if the same problem in the Oracle8 Vs.Pentium4 also exists for Oracle9i.
I have Windows2000,256RAM, Pentium3 1Ghz, and 13.8 free diskspace. But the installation always
hangs at 48%, my computer will just shut down and restart automatically without
even showing an error message. I have tried installing the Enterprise edition for 3
times already but everytime encountered the same problem. I've also tried custom installation
by selecting not to create database, but it also hung.
Before I started each installation, I always made sure that my registry and environment
path are cleared and that all the partially-installed Oracle files are deleted.
I hope that you or anyone who has a solution for this problem could be so kindly to help me out.
Thank you in advance.
ailee

Installation of Oracle 8i under Win XP ( PC DELL Pentium 4 )

Hello,
I try to Install Oracle 8i under Win XP ( PC DELL Pentium 4 ) but the program of installation can not lanch then
Oracle Universal Installer
Please help me

Hi,
Oracle 8i doest got install on P-IV machines , so u need a patch for P-iv machine , u can download it from oracle 's website and after u can install 8i on P-Iv machine easily ,

Oracle installation for Win NT

Similar Messages

Maybe you are looking for