Oracle Installation on linux Error in invoking target ntcontab.o
Hi All,
During installing Oracle 8i EE on mandrake Linux 7.0, at the point of linking oracle protocol support 8.1.6.1.0 ,while Linking in progress I got the following message box
"Error in invoking target ntcontab.o of make file /home/network/lib/ins_net_client.mk.
==================
ABORT,RETRY,IGNORE
==================
If I select igmore and continue , even after successfull installation ,when try to run svrmgr or sqlplus at the shell $
I am getting error in loading shared libraries.
Thanks a lot for the help
Anant Kuslekar
null
hi,i got the some problem too.
but maybe below could do some help:
================================================
Instructions for Existing Oracle8i Installations
Place the tar file glibc-2.1.3-stubs.tar.gz in $ORACLE_HOME.
Make sure ORACLE_HOME is set in your environment. Then carry out
the following steps:
cd $ORACLE_HOME
tar xvfz glibc-2.1.3-stubs.tar.gz
./setup_stubs.sh
You should now be able to use Oracle as usual.
================
Warning
Make sure the directory $ORACLE_HOME/lib is not listed in your
/etc/ld.so.conf. The system could potentially become unstable
after applying this patch in that case. If $ORACLE_HOME/lib is
currently listed in /etc/ld.so.conf, remove it and run ldconfig
before applying this patch.
================================
Notes for Application Developers
If your application does not require linking at install sites,
then no additional steps are required for your application to be
compatible with glibc or the Oracle8i client shared library
after the installation of this patch. This is true regardless of
whether your application was compiled using glibc-2.1.3 or a
later version.
If your application is compiled using glibc-2.1.3 and requires
linking at install-time using the Oracle8i client shared ibrary,
then you may also need to link your application using the stub
libraries provided in this patch. For example, an application
which might typically be linked as follows on a glibc-2.1.3
based system:
gcc -o app app.o -L$ORACLE_HOME/lib -lclntsh
should now be linked as follows on systems with a newer version
of glibc,in order to ensure compatibility:
gcc -o app app.o -L$ORACLE_HOME/lib -L$ORACLE_HOME/lib/stubs -
lclntsh
If your application is compiled using a version of glibc later
than 2.1.3 and requires linking at install-time using the acle8i
client shared library, then you must NOT link your application
with the stub libraries provided in this patch. Doing so may
either cause the link to fail or the resulting executables to be
invalid.
Note that the stub libraries provided in this patch only cover
the shared objects that make up glibc. If your application must
be linked at install-time with other shared objects which were
built to have dependencies on the locally installed version of
glibc (e.g., X11), then your application must be compiled using
the same version of glibc that was used by those other
components. For example, on a system with glibc-2.2, linking your
application with libX11.so will fail if you attempt to use the
glibc-2.1.3stub libraries, since libX11.so on that system will
have been compiled and linked using glibc-2.2.
Similar Messages
-
Problem during installation(error in invoking target 'ntcontab.o' of make f
Hi,
Operating System:Enterprise Linux Release 5 Update 2 for x86 (32 Bit)
Database:Oracle Database 10g Release 2 (10.2.0.1.0) for Linux x86
When I am trying to installt database on the VMware virtaul machine i am getting the following error durig the linking phase of installation(at 62%)
error in invoking target 'ntcontab.o' of make file.
I have googled for this error,but i didn't find any solution which fits my requirement.
I am hoping a expert advice from this forum for my problem.
Thank You all..Please post your Installation problems on under the Installation Topic => Database Installation
-
Error in invoking target 'ntcontab.o' of make file.
Hi,
Operating System:Enterprise Linux Release 5 Update 2 for x86 (32 Bit)
Database:Oracle Database 10g Release 2 (10.2.0.1.0) for Linux x86
When I am trying to installt database on the VMware virtaul machine i am getting the following error durig the linking phase of installation(at 62%)
error in invoking target 'ntcontab.o' of make file.
I have googled for this error,but i didn't find any solution which fits my requirement.
I am hoping a expert advice from this forum for my problem.
Thank You all..Hi , I have all rpms installed on RHEL 5 but still getting below error...
/usr/bin/make -f ins_net_client.mk mkldflags ORACLE_HOME=/11gdb/app/db11gee/product/11.1.0/db_1//usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/11gdb/app/db11gee/product/11.1.0/db_1/rm -f ntcontab.*
(if [ "compile" = "compile" ] ; then \
/11gdb/app/db11gee/product/11.1.0/db_1/bin/gennttab > ntcontab.c ;\
/usr/bin/gcc -c ntcontab.c ;\
rm -f /11gdb/app/db11gee/product/11.1.0/db_1/lib/ntcontab.o ;\
mv ntcontab.o /11gdb/app/db11gee/product/11.1.0/db_1/lib/ ;\
/usr/bin/ar rv /11gdb/app/db11gee/product/11.1.0/db_1/lib/libn11.a /11gdb/app/db11gee/product/11.1.0/db_1/lib/ntcontab.o ; fi)
In file included from /usr/include/sys/types.h:31,
from ntcontab.c:7:
/usr/include/bits/types.h:31:20: error: stddef.h: No such file or directory
mv: cannot stat `ntcontab.o': No such file or directory
/usr/bin/ar: /11gdb/app/db11gee/product/11.1.0/db_1/lib/ntcontab.o: No such file or directory
make: *** [ntcontab.o] Error 1
/usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/11gdb/app/db11gee/product/11.1.0/db_1/rm -f ntcontab.*
(if [ "compile" = "compile" ] ; then \
/11gdb/app/db11gee/product/11.1.0/db_1/bin/gennttab > ntcontab.c ;\
/usr/bin/gcc -c ntcontab.c ;\
rm -f /11gdb/app/db11gee/product/11.1.0/db_1/lib/ntcontab.o ;\
mv ntcontab.o /11gdb/app/db11gee/product/11.1.0/db_1/lib/ ;\
/usr/bin/ar rv /11gdb/app/db11gee/product/11.1.0/db_1/lib/libn11.a /11gdb/app/db11gee/product/11.1.0/db_1/lib/ntcontab.o ; fi)
In file included from /usr/include/sys/types.h:31,
from ntcontab.c:7:
/usr/include/bits/types.h:31:20: error: stddef.h: No such file or directory
mv: cannot stat `ntcontab.o': No such file or directory
/usr/bin/ar: /11gdb/app/db11gee/product/11.1.0/db_1/lib/ntcontab.o: No such file or directory
make: *** [ntcontab.o] Error 1
/usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/11gdb/app/db11gee/product/11.1.0/db_1/rm -f ntcontab.*
(if [ "compile" = "compile" ] ; then \
/11gdb/app/db11gee/product/11.1.0/db_1/bin/gennttab > ntcontab.c ;\
/usr/bin/gcc -c ntcontab.c ;\
rm -f /11gdb/app/db11gee/product/11.1.0/db_1/lib/ntcontab.o ;\
mv ntcontab.o /11gdb/app/db11gee/product/11.1.0/db_1/lib/ ;\
/usr/bin/ar rv /11gdb/app/db11gee/product/11.1.0/db_1/lib/libn11.a /11gdb/app/db11gee/product/11.1.0/db_1/lib/ntcontab.o ; fi)
In file included from /usr/include/sys/types.h:31,
from ntcontab.c:7:
/usr/include/bits/types.h:31:20: error: stddef.h: No such file or directory
mv: cannot stat `ntcontab.o': No such file or directory
/usr/bin/ar: /11gdb/app/db11gee/product/11.1.0/db_1/lib/ntcontab.o: No such file or directory
make: *** [ntcontab.o] Error 1
/usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/11gdb/app/db11gee/product/11.1.0/db_1/rm -f ntcontab.*
(if [ "compile" = "compile" ] ; then \
/11gdb/app/db11gee/product/11.1.0/db_1/bin/gennttab > ntcontab.c ;\
/usr/bin/gcc -c ntcontab.c ;\
rm -f /11gdb/app/db11gee/product/11.1.0/db_1/lib/ntcontab.o ;\
mv ntcontab.o /11gdb/app/db11gee/product/11.1.0/db_1/lib/ ;\
/usr/bin/ar rv /11gdb/app/db11gee/product/11.1.0/db_1/lib/libn11.a /11gdb/app/db11gee/product/11.1.0/db_1/lib/ntcontab.o ; fi)
In file included from /usr/include/sys/types.h:31,
from ntcontab.c:7:
/usr/include/bits/types.h:31:20: error: stddef.h: No such file or directory
mv: cannot stat `ntcontab.o': No such file or directory
/usr/bin/ar: /11gdb/app/db11gee/product/11.1.0/db_1/lib/ntcontab.o: No such file or directory
make: *** [ntcontab.o] Error 1 -
Hello,
i try to Upgrade from oracle 9.2.0.7 to Oracle 10.2.0.1.
But the Linking to not work.
The Paket: bos-adm-libm is installt.
The Oracle Installer say - all OK, no errors.
The Script: rootpre.sh i run as user: root, befor i strart runInstaller
Here is a part of the file: /oracle/SAP1/oraInventory/logs/installActions2008-05-16_03-23-23PM.log
INFO: Start output from spawned process:
INFO: ----------------------------------
INFO:
INFO: rm -f ntcontab.*
INFO: (if [ "assemble" = "compile" ] ; then /oracle/SAP1/1020_64/bin/gennttab > ntcontab.c ; /oracle/SAP1/1020_64/bin/oraxlc -c ntcontab.c ; rm -f /oracle/SAP1/1020_64/lib/ntcontab.o ; mv ntcontab.o /oracle/SAP1/1020_64/lib/ ; /bin/ar -
X64 rv /oracle/SAP1/1020_64/lib/libn10.a /oracle/SAP1/1020_64/lib/ntcontab.o ; fi)
INFO: (if [ "assemble" = "assemble" ] ; then /oracle/SAP1/1020_64/bin/gennttab > ntcontab.s ; /bin/as -a64 -o ntcontab.o ntcontab.s ; rm -f /oracle/SAP1/1020_64/lib/ntcontab.o ; mv ntcontab.o /oracle/SAP1/1020_64/lib/ ; /bin/ar -X64 rv
/oracle/SAP1/1020_64/lib/libn10.a /oracle/SAP1/1020_64/lib/ntcontab.o ; fi)
INFO: Assembler:
INFO: ntcontab.s: line 20: 1252-023 The symbol t1 is not defined.
ntcontab.s: line 20: 1252-040 The specified expression is not valid.
Make sure that all symbols are defined.
Check the rules on symbols used in an arithmetic expression
concerning relocation.
INFO: make: 1254-004 The error code from the last command is 1.
Stop.
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'ntcontab.o' of makefile '/oracle/SAP1/1020_64/network/lib/ins_net_client.mk'. See '/oracle/SAP1/oraInventory/logs/installActions2008-05-16_03-23-23PM.log' for details.
Exception Severity: 1
make -f ins_net_client.mk install
/bin/chmod 755 /oracle/SAP1/920_64/bin/
- Linking
rm -f trcroute
ld -b64 -o trcroute -L/oracle/SAP1/920_64/network/lib/ -L/oracle/SAP1/920_64/lib/ /oracle/SAP1/920_64/network/lib/s0nur.o /oracle/SAP1/920_64/network/lib/nur.o `cat /oracle/SAP1/920_64/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnro9 `cat /oracle/SAP1/920_64/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -lwtc9 -lmm -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 `cat /oracle/SAP1/920_64/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnro9 `cat /oracle/SAP1/920_64/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -lpls9 -ltrace9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 -lld -lm `cat /oracle/SAP1/920_64/lib/sysliblist` -lm `if [ "\`/usr/bin/uname -v\`" = "4" ]; \
then echo "-bI:/oracle/SAP1/920_64/lib/pw-syscall.exp"; fi;` -lxsd9 /oracle/SAP1/920_64/lib/nautab.o /oracle/SAP1/920_64/lib/naeet.o /oracle/SAP1/920_64/lib/naect.o /oracle/SAP1/920_64/lib/naedhs.o /oracle/SAP1/920_64/rdbms/lib/defopt.o -lmm
mv -f /oracle/SAP1/920_64/bin/trcroute /oracle/SAP1/920_64/bin/trcroute0
mv trcroute /oracle/SAP1/920_64/bin/trcroute
/bin/chmod 751 /oracle/SAP1/920_64/bin/trcroute
make: 1254-002 Cannot find a rule to create target ionrsd from dependencies.
Stop.
But the ENV: LIBRARY_PATH=/oracle/SAP1/920_64
i have delete with export LIBRARY_PATH=
before i run the runInstaller
If i set the ORACLE_HOME and LIBRARY_PATH
the i can see this:
make -f ins_net_client.mk install
/bin/chmod 755 /oracle/SAP1/1020_64/bin/
- Linking trcroute
rm -f trcroute
ld -b64 -o trcroute -L/oracle/SAP1/1020_64/network/lib/ -L/oracle/SAP1/1020_64/lib/ /oracle/SAP1/1020_64/network/lib/s0nur.o /oracle/SAP1/1020_64/network/lib/nur.o `cat /oracle/SAP1/1020_64/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr
10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /oracle/SAP1/1020_64/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclieSAP10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lmm -lsnls10 -lnls10 -lcore10 -lsnls10
-lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /oracle/SAP1/1020_64/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /oracle/SAP1/1020_64/lib/ldf
lags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclieSAP10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lpls10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -lcore10 -lunls10 -lsnls
10 -lnls10 -lcore10 -lnls10 -lclieSAP10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lld -lm `cat /oracle
/SAP1/1020_64/lib/sysliblist` -lm `if [ "\`/usr/bin/uname -v\`" = "4" ]; \
then echo "-bI:/oracle/SAP1/1020_64/lib/pw-syscall.exp"; fi;` /oracle/SAP1/1020_64/lib/nautab.o /oracle/SAP1/1020_64/lib/naeet.o /oracle/SAP1/1020_64/lib/naect.o /oracle/SAP1/1020_64/lib/naedhs.o /oracle/SAP1/1020_64/rdbms/lib/defopt.
o -lmm
mv -f /oracle/SAP1/1020_64/bin/trcroute /oracle/SAP1/1020_64/bin/trcroute0
mv trcroute /oracle/SAP1/1020_64/bin/trcroute
/bin/chmod 751 /oracle/SAP1/1020_64/bin/trcroute
- Linking
rm -f tnsping
ld -b64 -o tnsping -L/oracle/SAP1/1020_64/network/lib/ -L/oracle/SAP1/1020_64/lib/ /oracle/SAP1/1020_64/network/lib/s0nsping.o /oracle/SAP1/1020_64/network/lib/nsping.o `cat /oracle/SAP1/1020_64/lib/ldflags` -lnsslb10 -lncrypt10 -
lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /oracle/SAP1/1020_64/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclieSAP10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lmm -lsnls10 -lnls10 -lcore10 -lsn
ls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /oracle/SAP1/1020_64/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /oracle/SAP1/1020_64/li
b/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclieSAP10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lpls10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -lcore10 -lunls10 -
lsnls10 -lnls10 -lcore10 -lnls10 -lclieSAP10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lld -lm `cat /o
racle/SAP1/1020_64/lib/sysliblist` -lm `if [ "\`/usr/bin/uname -v\`" = "4" ]; \
then echo "-bI:/oracle/SAP1/1020_64/lib/pw-syscall.exp"; fi;` /oracle/SAP1/1020_64/lib/nautab.o /oracle/SAP1/1020_64/lib/naeet.o /oracle/SAP1/1020_64/lib/naect.o /oracle/SAP1/1020_64/lib/naedhs.o /oracle/SAP1/1020_64/rdbms/lib/defopt.
o -lmm
mv -f /oracle/SAP1/1020_64/bin/tnsping /oracle/SAP1/1020_64/bin/tnsping0
mv tnsping /oracle/SAP1/1020_64/bin/tnsping
/bin/chmod 751 /oracle/SAP1/1020_64/bin/tnsping
Target "install" is up to date.
What did i wrong ?
The AIX is fresh bootet, without any oracle process start at boottime
Thanks and have a nice weekend
Dennis
Message was edited by:
user636686
Message was edited by:
user636686
Message was edited by:
user636686
Message was edited by:
user636686
Message was edited by:
user636686here are my env from the user i run the runInstaller:
STAGING_AREA=/oracle/stage/920_64
ORACLE_PSRV=SAP1
PATH=/oracle/SAP1/1020_64/bin:/usr/sap/NT1/SYS/exe/run:/bin:/usr/bin:/usr/sbin:/usr/bin/X11:/usr/ucb:/usr/ccs/b
in:/usr/local/bin:/etc:.
SAPBACKUP=/oracle/SAP1/sapbackup
ORACLE_BASE=/oracle
HISTFILE=/oracle/SAP1/.sh_history
TMP=/oracle/SAP1
SAPTRACE=/oracle/SAP1/saptrace
LIBARY_PATH=/oracle/SAP1/1020_64
ORACLE_SID=SAP1
SAPDATA_HOME=/oracle/SAP1
HOME=/oracle/SAP1
SAPARCH=/oracle/SAP1/saparch
ORACLE_HOME=/oracle/SAP1/1020_64
PWD=/oracle/dvd/Disk0/database/Disk1
ENV=/oracle/SAP1/.kshrc
SAPREORG=/oracle/SAP1/sapreorg
xlC.aix50.rte 9.0.0.5 COMMITTED XL C/C++ Runtime for AIX 5.2
xlC.rte 9.0.0.5 COMMITTED XL C/C++ Runtime
xlC.cpp 6.0.0.0 COMMITTED C for AIX Preprocessor
xlC.msg.en_US.cpp 6.0.0.0 COMMITTED C for AIX Preprocessor
gcc-4.2.0-3 -
Error in invoking target 'ntcontab.o on linux while patch application
Please help me to resolve this issue.
I am getting the Error in invoking target 'ntcontab.o' while upgrading the oracle database 10.2.0.1 to 10.2.0.4 on linux 5 x86 machine
Exception Name: MakefileException
Exception String: Error in invoking target 'ntcontab.o' of makefile '/u01/app/oracle/product/10.2.0/db_1/network/lib/ins_net_client.mk'. See '/u01/app/oracle/oraInventory/logs/installActions2009-02-13_10-24-42PM.log' for details.
Exception Severity: 1Duplicate Thread
Re: Error in invoking target 'ntcontab.o' while applying patch 10.2.0.4 on lin -
Installation error - Error in invoking target 'ntcontab.o'
OS: RHEL 5 64bit
Oracle 10g (10.2.0.1.0)
Error in invoking target 'ntcontab.o' of makefile '/u01/app/oracle/product/10.2.0/db_1/network/lib/ins_net_client.mk'. See '/u01/app/oracle/oraInventory/logs/installActions2010-07-27_07-58-23AM.log' for details.
INFO: Start output from spawned process:
INFO: ----------------------------------
INFO:
INFO: rm -f ntcontab.*
INFO: (if [ "compile" = "compile" ] ; then \
/u01/app/oracle/product/10.2.0/db_1/bin/gennttab > ntcontab.c ;\
gcc -c ntcontab.c ;\
rm -f /u01/app/oracle/product/10.2.0/db_1/lib/ntcontab.o ;\
mv ntcontab.o /u01/app/oracle/product/10.2.0/db_1/lib/ ;\
/usr/bin/ar rv /u01/app/oracle/product/10.2.0/db_1/lib/libn10.a /u01/app/oracle/product/10.2.0/db_1/lib/ntcontab.o ; fi)
INFO: /bin/sh: line 2: /usr/bin/gcc: Permission denied
INFO: mv: cannot stat `ntcontab.o'
INFO: : No such file or directory
INFO: /usr/bin/ar: /u01/app/oracle/product/10.2.0/db_1/lib/ntcontab.o: No such file or directory
INFO: make: *** [ntcontab.o] Error 1
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'ntcontab.o' of makefile '/u01/app/oracle/product/10.2.0/db_1/network/lib/ins_net_client.mk'. See '/u01/app/oracle/oraInventory/logs/installActions2010-07-27_07-58-23AM.log' for details.
Exception Severity: 1Checking Packages (RPMs)
You will need some RPM development packages for the Oracle installer to build the Oracle modules, otherwise you will get error messages similar to this one:
Error in invoking target ntcontab.o of makefile
/u01/app/oracle/product/9.2.0/network/lib/ins_net_client.mk
NOTE: Always ensure to use the latest RPM versions!
Packages (RPMs) for RH 7.1, 7.2, and RH AS 2.1:
To see if these development packages are installed on your server, run the following command:
rpm -q gcc cpp compat-libstdc++ glibc-devel kernel-headers binutils
For instance, most of these packages will be missing when you installed RedHat 2.1 Advanced Server and if you did not select the "Software Development" package. For the RedHat 2.1 Advanced Server I executed the following commands to install the missing RPMs from the two CDs:
su - root
rpm -ivh cpp-2.96-108.1.i386.rpm \
glibc-devel-2.2.4-26.i386.rpm \
kernel-headers-2.4.9-e.3.i386.rpm \
gcc-2.96-108.1.i386.rpm \
binutils-2.11.90.0.8-12.i386.rpm -
Error in invoking target "ntcontab.o"of makefile
hi guys,
i am installing Oracle 10.2.0 s/w on SuSe Linux Ent 10 SP2. at the time of Database installation the following error is displayed.
"Error in invoking target "ntcontab.o"of makefile /oracle/PTS/102_64/network/lib/ins_net_client.mk see /oracle/orainventory/logs/InstallActions-02-02-2009.log "
NFO: Start output from spawned process:
INFO: -
INFO:
INFO: rm -f ntcontab.*
INFO: (if [ "compile" = "compile" ] ; then \
/oracle/PTS/102_64/bin/gennttab > ntcontab.c
gcc -c ntcontab.c
rm -f /oracle/PTS/102_64/lib/ntcontab.o
mv ntcontab.o /oracle/PTS/102_64/lib/
INFO: /usr/bin/ar rv /oracle/PTS/102_64/lib/libn10.a /oracle/PTS/102_64/lib/ntcontab.o ; fi)
INFO: /bin/sh: gcc: command not found
INFO: mv: cannot stat `ntcontab.o': No such file or directory
INFO: /usr/bin/ar: /oracle/PTS/102_64/lib/ntcontab.o: No such file or directory
INFO: make: *** [ntcontab.o] Error 1
INFO: End output from spawned process.
INFO: -
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'ntcontab.o' of makefile '/oracle/PTS/102_64/network/lib/ins_net_client.mk'. See '/oracle/oraInventory/logs/installActions2009-02-26_12-15-10PM.log' for details.
Exception Severity: 1
INFO: Exception handling set to prompt user with options to Retry Ignore
User Choice: Retry
INFO: The output of this make operation is also available at: '/oracle/PTS/102_64/install/make.log'
INFO:
INFO: Start output from spawned process:
INFO: -
INFO:
INFO: rm -f ntcontab.*
INFO: (if [ "compile" = "compile" ] ; then \
/oracle/PTS/102_64/bin/gennttab > ntcontab.c
gcc -c ntcontab.c
rm -f /oracle/PTS/102_64/lib/ntcontab.o
mv ntcontab.o /oracle/PTS/102_64/lib/
INFO: /usr/bin/ar rv /oracle/PTS/102_64/lib/libn10.a /oracle/PTS/102_64/lib/ntcontab.o ; fi)
INFO: /bin/sh: gcc: command not found
INFO: mv: cannot stat `ntcontab.o': No such file or directory
INFO: /usr/bin/ar: /oracle/PTS/102_64/lib/ntcontab.o: No such file or directory
INFO: make: *** [ntcontab.o] Error 1
INFO: End output from spawned process.
INFO: -
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'ntcontab.o' of makefile '/oracle/PTS/102_64/network/lib/ins_net_client.mk'. See '/oracle/oraInventory/logs/installActions2009-02-26_12-15-10PM.log' for details.
Exception Severity: 1
INFO: Exception handling set to prompt user with options to Retry Ignore
User Choice: Retry
INFO: The output of this make operation is also available at: '/oracle/PTS/102_64/install/make.log'
INFO:
INFO: Start output from spawned process:
INFO: -
INFO:
INFO: rm -f ntcontab.*
INFO: (if [ "compile" = "compile" ] ; then \
/oracle/PTS/102_64/bin/gennttab > ntcontab.c
gcc -c ntcontab.c
rm -f /oracle/PTS/102_64/lib/ntcontab.o
mv ntcontab.o /oracle/PTS/102_64/lib/
INFO: /usr/bin/ar rv /oracle/PTS/102_64/lib/libn10.a /oracle/PTS/102_64/lib/ntcontab.o ; fi)
INFO: /bin/sh: gcc: command not found
INFO: mv: cannot stat `ntcontab.o': No such file or directory
INFO: /usr/bin/ar: /oracle/PTS/102_64/lib/ntcontab.o: No such file or directory
INFO: make: *** [ntcontab.o] Error 1
INFO: End output from spawned process.
INFO: -
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'ntcontab.o' of makefile '/oracle/PTS/102_64/network/lib/ins_net_client.mk'. See '/oracle/oraInventory/logs/installActions2009-02-26_12-15-10PM.log' for details.
Exception Severity: 1
INFO: Exception handling set to prompt user with options to Retry Ignore
User Choice: Retry
INFO: The output of this make operation is also available at: '/oracle/PTS/102_64/install/make.log'
INFO:
INFO: Start output from spawned process:
INFO: -
INFO:
INFO: rm -f ntcontab.*
INFO: (if [ "compile" = "compile" ] ; then \
/oracle/PTS/102_64/bin/gennttab > ntcontab.c
gcc -c ntcontab.c
rm -f /oracle/PTS/102_64/lib/ntcontab.o
mv ntcontab.o /oracle/PTS/102_64/lib/
INFO: /usr/bin/ar rv /oracle/PTS/102_64/lib/libn10.a /oracle/PTS/102_64/lib/ntcontab.o ; fi)
INFO: /bin/sh: gcc: command not found
INFO: mv: cannot stat `ntcontab.o': No such file or directory
INFO: /usr/bin/ar: /oracle/PTS/102_64/lib/ntcontab.o: No such file or directory
INFO: make: *** [ntcontab.o] Error 1
INFO: End output from spawned process.
INFO: -
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'ntcontab.o' of makefile '/oracle/PTS/102_64/network/lib/ins_net_client.mk'. See '/oracle/oraInventory/logs/installActions2009-02-26_12-15-10PM.log' for details.
Exception Severity: 1
INFO: Exception handling set to prompt user with options to Retry Ignore
User Choice: Retry
INFO: The output of this make operation is also available at: '/oracle/PTS/102_64/install/make.log'
INFO:
INFO: Start output from spawned process:
INFO: -
INFO:
INFO: rm -f ntcontab.*
INFO: (if [ "compile" = "compile" ] ; then \
/oracle/PTS/102_64/bin/gennttab > ntcontab.c
gcc -c ntcontab.c
rm -f /oracle/PTS/102_64/lib/ntcontab.o
mv ntcontab.o /oracle/PTS/102_64/lib/
INFO: /usr/bin/ar rv /oracle/PTS/102_64/lib/libn10.a /oracle/PTS/102_64/lib/ntcontab.o ; fi)
INFO: /bin/sh: gcc: command not found
mv: cannot stat `ntcontab.o': No such file or directory
INFO: /usr/bin/ar: /oracle/PTS/102_64/lib/ntcontab.o: No such file or directory
INFO: make: *** [ntcontab.o] Error 1
INFO: End output from spawned process.
INFO: -
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'ntcontab.o' of makefile '/oracle/PTS/102_64/network/lib/ins_net_client.mk'. See '/oracle/oraInventory/logs/installActions2009-02-26_12-15-10PM.log' for details.
Exception Severity: 1
please help me on this issue
Regards
RameshHello Ramesh,
have you installed all the software components of SLES 10 like described in sapnote #958253?
It seems like you don't have installed the gcc compiler.
Regards
Stefan -
Error in invoking target 'ntcontab.o' of make file. 11g x32 on x64 machine.
Hello all,
We have Red Hat 5.8 x86_64 and we have requirement to install WebTier x32 on our system. As per Oracle documentation it is possible if we apply linux32 bash before installation and do step 2.1.1.2 described in this document -> http://docs.oracle.com/cd/E14571_01/doc.1111/e14260/install.htm
During installation of FMW 11g x32 11.1.1.6.0 we have error on 92% (see attachement).
All installation prerequirements are sucsessfull.
We are applying only HTTP server for Siebel.
######ERROR we are reciewing during installation:
Error in invoking target 'ntcontab.o' of makefile '/app/middleware4/ohs/network/lib/ins_net_client.mk'. See '/app/ora11/oraInventory/logs/install2012-06-28_01-19-16PM.log' for details.
######And this is output from make.log:
/usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/app/middleware2/ohs2/rm -f ntcontab.*
(if [ "compile" = "compile" ] ; then \
/app/middleware2/ohs2/bin/gennttab > ntcontab.c ;\
/usr/bin/gcc -c ntcontab.c ;\
rm -f /app/middleware2/ohs2/lib/ntcontab.o ;\
mv ntcontab.o /app/middleware2/ohs2/lib/ ;\
/usr/bin/ar rv /app/middleware2/ohs2/lib/libn11.a /app/middleware2/ohs2/lib/ntcontab.o ; fi)
gcc.orig: no input files
mv: cannot stat `ntcontab.o': No such file or directory
/usr/bin/ar: /app/middleware2/ohs2/lib/ntcontab.o: No such file or directory
make: *** [ntcontab.o] Error 1
######These are packages we got on our system:
automake14-1.4p6-13.el5.1.noarch
automake15-1.5-16.el5.2.noarch
automake16-1.6.3-8.el5.1.noarch
automake17-1.7.9-7.el5.2.noarch
automake-1.9.6-2.3.el5.noarch
binutils-2.17.50.0.6-20.el5.x86_64
compat-db-4.2.52-5.1.x86_64
compat-gcc-34-3.4.6-4.1.x86_64
compat-gcc-34-c++-3.4.6-4.1.x86_64
compat-gcc-34-g77-3.4.6-4.1.x86_64
compat-glibc-2.3.4-2.26.i386
compat-glibc-2.3.4-2.26.x86_64
compat-glibc-headers-2.3.4-2.26.x86_64
compat-libcom_err-1.0-7.i386
compat-libcom_err-1.0-7.x86_64
compat-libf2c-34-3.4.6-4.1.x86_64
compat-libgcc-296-2.96-138.i386
compat-libstdc++-296-2.96-138.i386
compat-libstdc++-33-3.2.3-61.i386
compat-libstdc++-33-3.2.3-61.x86_64
cpp-4.1.2-52.el5.x86_64
elfutils-libelf-0.137-3.el5.i386
elfutils-libelf-0.137-3.el5.x86_64
elfutils-libelf-devel-0.137-3.el5.x86_64
elfutils-libelf-devel-static-0.137-3.el5.x86_64
gcc-4.1.2-52.el5.x86_64
gcc-c++-4.1.2-52.el5.x86_64
gcc-gfortran-4.1.2-52.el5.x86_64
glibc-2.5-81.el5_8.2.i686
glibc-2.5-81.el5_8.2.x86_64
glibc-common-2.5-81.el5_8.2.x86_64
glibc-devel-2.5-81.el5_8.2.i386
glibc-devel-2.5-81.el5_8.2.x86_64
glibc-headers-2.5-81.el5_8.2.x86_64
imake-1.0.2-3.x86_64
java-1.4.2-gcj-compat-1.4.2.0-40jpp.115.x86_64
ksh-20100621-5.el5_8.1.x86_64
libaio-0.3.106-5.i386
libaio-0.3.106-5.x86_64
libaio-devel-0.3.106-5.x86_64
libgcc-4.1.2-52.el5.i386
libgcc-4.1.2-52.el5.x86_64
libstdc++-4.1.2-52.el5.i386
libstdc++-4.1.2-52.el5.x86_64
libstdc++-devel-4.1.2-52.el5.i386
libstdc++-devel-4.1.2-52.el5.x86_64
make-3.81-3.el5.x86_64
openmotif-2.3.1-6.1.el5_8.i386
openmotif-2.3.1-6.1.el5_8.x86_64
sysstat-7.0.2-11.el5.x86_64
Please help with some ideas.
Thank You,
aspxSolved.
heh...2.1.1.2 must be in one line...
aspx -
Hello,
Doing an install of an Oracle 8.1.7 database on a Linux SLES8 SP2a
After I run the runinstaller, I've a problem !
The message:
Error in invoking target ntcontab.o of make file ¤ORACLE_HOME/network/lib/ins_net_client.mk
I install the glibc-2.1.3-stubs OK
I run ./setup_stubs.sh then in the graphical environnement RETRY
but I've the same problem !
Any ideas ? What is going on ?
Philippehey, i found something about gcc and that you have to link two files yourself, everything has gone well up until i tried to link the second file and got the error:
/usr/bin/ld: cannot find -lxml10-lunls10
collect2: ld returned 1 exit status
The command i was trying to run was this:
linuxbox:/home/oracle# gcc -o /home/oracle/OraHome_1/rdbms/lib/extproc -L/home/oracle/OraHome_1/rdbms/lib/ -L/home/oracle/OraHome_1/lib/ -L/home/oracle/OraHome_1/lib/stubs/ /home/oracle/OraHome_1/rdbms/lib/hormc.o /home/oracle/OraHome_1/rdbms/lib/defopt.o /home/oracle/OraHome_1/rdbms/lib/homts.o -lagtsh -lpls10 -lplp10 -lclntsh -lcore10 -lxml10-lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 /home/oracle/OraHome_1/lib/libgeneric10.a `cat /home/oracle/OraHome_1/lib/sysliblist` -Wl,-rpath,/home/oracle/OraHome_1/lib -lm `cat /home/oracle/OraHome_1/lib/sysliblist` -ldl -lm -L/home/oracle/OraHome_1/lib -lvsn10 -lnro10
I'm not sure where the missing file is supposed to be, what it does or how to fix it. I'm just stuck now.
Any suggestions? -
URGENT - Installing 817 - redhat 7.1 Gives Error in invoking target ntcontab.o
Hi All,
I have installed Redhat 7.1 and I am trying to install oracle 817 ee over it.
after finishing all pre install requirments I succedded to start the installer
- I installed jdk 118 v3
- I added the Display and assume_kernel parameters to bash file
but at the middle of setup it is giving the following error
"Error in invoking target ntcontab.o of makefile
/boot/u01/app/oracle/product/8.1.7/network/lib/ins_net_client.mk" and I tried to reply but it comes again
here is the install log file
"Starting install link phase of component Net8 Required Support Files
Calling action unixActions1.7.1.5.0 registerForMake
installMakePath = /usr/bin/make
installMakeFileName =
/boot/u01/app/oracle/product/8.1.7/network/lib/ins_net_client.mk
installTarget = mkldflags
installArguments = ORACLE_HOME=/boot/u01/app/oracle/product/8.1.7,
undoMakeFileName = null
undoTarget = null
undoArguments = null
logFile = /boot/u01/app/oracle/product/8.1.7/install/make.log
progMsg = Linking ldflags
Calling action unixActions1.7.1.5.0 make
installMakePath = /usr/bin/make
installMakeFileName =
/boot/u01/app/oracle/product/8.1.7/network/lib/ins_net_client.mk
installTarget = ntcontab.o
installArguments = ORACLE_HOME=/boot/u01/app/oracle/product/8.1.7,
undoMakeFileName = null
undoTarget = null
undoArguments = null
logFile = /boot/u01/app/oracle/product/8.1.7/install/make.log
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target ntcontab.o of makefile
/boot/u01/app/oracle/product/8.1.7/network/lib/ins_net_client.mk
Exception Severity: 1
Exception handling set to prompt user with options to RETRY IGNORE"
please tell me what can I do to overcome this taking into consideration that I have downloaded and executed oracle patch published at otn.oracle.com
waiting for your replycheck these
rpm -q compat-libs
rpm -q compat-glibc
rpm -q compat-egcs -
Please help me to resolve this issue.
I am getting the Error in invoking target 'ntcontab.o' while upgrading the oracle database 10.2.0.1 to 10.2.0.4
Exception Name: MakefileException
Exception String: Error in invoking target 'ntcontab.o' of makefile '/u01/app/oracle/product/10.2.0/db_1/network/lib/ins_net_client.mk'. See '/u01/app/oracle/oraInventory/logs/installActions2009-02-13_10-24-42PM.log' for details.
Exception Severity: 1See '/u01/app/oracle/oraInventory/logs/installActions2009-02-13_10-24-42PM.log' for details.Can you update the thread with the error in this log?
-
Error in invoking target 'ntcontab.o'
Hi,
I'm installing oracle 11gR1 on AIX 6.1 server, and I meet this problem on linking oracle step, Please help me to slove it,thanks
INFO: Start output from spawned process:
INFO: ----------------------------------
INFO:
INFO: rm -f ntcontab.*
INFO: (if [ "assemble" = "compile" ] ; then /oracle/db/product/11.1.0/db_1/bin/gennttab > ntcontab.c ; /oracle/db/product/11.1.0/
db_1/bin/oraxlc -c ntcontab.c ; rm -f /oracle/db/product/11.1.0/db_1/lib/ntcontab.o ; mv ntcontab.o /oracle/db/product/11.1.0/db_1
/lib/ ; /bin/ar -X64 rv /oracle/db/product/11.1.0/db_1/lib/libn11.a /oracle/db/product/11.1.0/db_1/lib/ntcontab.o ; fi)
INFO: (if [ "assemble" = "assemble" ] ; then /oracle/db/product/11.1.0/db_1/bin/gennttab > ntcontab.s ; /bin/as -a64 -o ntcontab
.o ntcontab.s ; rm -f /oracle/db/product/11.1.0/db_1/lib/ntcontab.o ; mv ntcontab.o /oracle/db/product/11.1.0/db_1/lib/ ; /bin/ar -X
64 rv /oracle/db/product/11.1.0/db_1/lib/libn11.a /oracle/db/product/11.1.0/db_1/lib/ntcontab.o ; fi)
INFO: mv: 0653-401 Cannot rename ntcontab.o to /oracle/db/product/11.1.0/db_1/lib//ntcontab.o:
A file or directory in the path name does not exist.
INFO: make: 1254-004 The error code from the last command is 1.
Stop.Pl confirm you are following all of the steps in the Install Guide - Contents
-
Oracle 9i Error in invoking target ntcontab.o of makefile
Does anybody know what this means / how to get the install to continue (I am using Mandrake 8.1) I am new both to Oracle and Linux, help to finally get this installed would be much appreciated.
user2040322 wrote:
n/sh: /usr/bin/gcc: No such file or directory
mv: cannot stat `ntcontab.o': No such file or directoryWhat is OS and do You installed all needed packages?
For example from this error we can see that gcc probably is missing.
Check install guide and install required packages. -
Hi,
please help me on this installation problem as i facing an error. I suppose my make.log file is the same as written on Note:234898.1. The next solution i suppose is fix and install a C++ compiler. Please help/advice/suggest me on C++ compiler. My package gcc installed are (gcc-3.3.4-11 and gcc-c++3.3.4-11).
Thanks and appreciatefeizz,
Ok, on certification matrix, we can read any info :
Documentation Updates :
* Please refer to Oracle9i Release Notes Release 2 (9.2.0.5.0) for information on SLES9 :
* Part number B13670-03 http://www.oracle.com/technology/documentation/oracle9i.html
* Please, also, refer toOracle9i Database Server Patch Set Notes Release 2 (9.2.0.5) Patch Set 4 for Linux x86
To install 9205:
* install 9204 and then the 9205 PatchSet.
* patchset 9.2.0.5 on SLES9 please refer to bug 3809563
Additional steps to be followed prior to Installation for 9204:
* If using Bourne, Bash, or Korn shell: ( /usr/lib/libInternalSymbols.so can be obtained from the orarun package )
o ORACLE_BASE= ; export ORACLE_BASE
o LD_ASSUME_KERNEL=2.4.21; export LD_ASSUME_KERNEL
o LD_PRELOAD=/usr/lib/libInternalSymbols.so ; export LD_PRELOAD
Please, check this patch to see if you are in this situation.
More than, I strongly advise to read note 169706.1 Oracle RDBMS on AIX,HP-UX,Solaris,Tru64,Linux,MacOSX: Versions, Sizes, Requirements Quick Reference
Good luck, and tell us if patch help you.
Nicolas. -
10g grid instalaltion on Suse 9 - Error in invoking target 'ioracle' of mak
Please give me step by step instruction how to overcome this problem. I have all packages as per installation document.I am selecting create new database option during installation.
During installation , I got Error in invoking target 'ioracle' of makefile '/opt/oracle/product/10.1.0/EM10g_1/rdbms/lib/ins_rdbms error so I have selected continue (which uses default values)
Exception String: Error in invoking target 'ioracle' of makefile '/opt/oracle/product/10.1.0/EM10g_1/rdbms/lib/ins_rdbms.
mk'. See '/opt/oracle/oraInventory/logs/installActions2005-10-27_12-42-17PM.log' for details.
later I got this error. I didn't include the path variable as it takes itself during instalaltion.
/opt/oracle has jre file
drwxrwxr-x 10 oracle dba 4096 2005-10-27 18:27 oraInventory
drwxrwxr-x 3 oracle dba 4096 2005-10-27 15:34 jre
drwxrwxr-x 3 oracle dba 4096 2005-10-27 14:02 product
but in following path opt/oracle/jre/1.1.8/bin/../bin/i686/native_threads/jre it puts ../bin . Which parameter needs to modify or which scripts need to modify to continue the instalaltion.
Starting to execute configuration assistants
Launched configuration assistant 'Oracle Net Configuration Assistant'
Tool type is: Recommended.
The command being spawned is: '/opt/oracle/product/10.1.0/EM10g_1/JRE/bin/jre -native -Duser.dir=/opt/oracle/product/10.
1.0/EM10g_1/network/jlib -classpath /opt/oracle/product/10.1.0/EM10g_1/JRE/lib/i18n.jar:/opt/oracle/product/10.1.0/EM10g_
1/JRE/lib/rt.jar:/opt/oracle/product/10.1.0/EM10g_1/jlib/ewt3.jar:/opt/oracle/product/10.1.0/EM10g_1/jlib/ewtcompat-3_3_1
5.jar:/opt/oracle/product/10.1.0/EM10g_1/jlib/netcfg.jar:/opt/oracle/product/10.1.0/EM10g_1/network/jlib/netcam.jar:/opt/
oracle/product/10.1.0/EM10g_1/network/jlib/netca.jar:/opt/oracle/product/10.1.0/EM10g_1/jlib/help3.jar:/opt/oracle/produc
t/10.1.0/EM10g_1/jlib/oracle_ice5.jar:/opt/oracle/product/10.1.0/EM10g_1/jlib/share.jar:/opt/oracle/product/10.1.0/EM10g_
1/jlib/swingall-1_1_1.jar:/opt/oracle/product/10.1.0/EM10g_1/jlib/srvm.jar:/opt/oracle/product/10.1.0/EM10g_1/network/too
ls oracle.net.ca.NetCA /silent /orahome /opt/oracle/product/10.1.0/EM10g_1 /instype custom /inscomp NO_VALUE /insprtcl tc
p,tcps /cfg local /authadp NO_VALUE /responseFile /opt/oracle/product/10.1.0/EM10g_1/network/install/netca_clt_cus.rsp'
Start output from spawned process:
/opt/oracle/jre/1.1.8/bin/../bin/i686/native_threads/jre: relocation error: /opt/oracle/jre/1.1.8/bin/../lib/i686/native_
threads/libjava.so: symbol __libc_wait, version GLIBC_2.0 not defined in file libc.so.6 with link time reference
End output from spawned process.
Invalid Exit Code. The following result code will be used for configuration assistants: 1
Configuration assistant "Oracle Net Configuration Assistant" failed
/opt/oracle/jre/1.1.8/bin/../bin/i686/native_threads/jre: relocation error: /opt/oracle/jre/1.1.8/bin/../lib/i686/native_
threads/libjava.so: symbol __libc_wait, version GLIBC_2.0 not defined in file libc.so.6 with link time reference
Result code for launching of configuration assistant is: 1
The OUICA command is launched from /opt/oracle/product/10.1.0/EM10g_1/oui/bin/ouica.sh.
Error:*** Alert: Some of the configuration assistants failed. It is strongly recommended that you retry the configuration
assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly c
onfigured. Select the failed assistants and click the 'Retry' button to retry them. ***
User Selected: Yes/OKI am having the same issue trying to install EM Grid Control 10.1.0.2 on a 9.2.0.5 Repository on HP-UX platform. I am wondering if you have found a solution?
Thanks,
Dawit
Maybe you are looking for
-
Ive been trying to forward an email and ive been getting this message 5.7.0 Must issue a STARTTLS command first h34sm12533822wxd does anyone know what this might mean? Sorry, ive been usig entourage for emails.
-
How to include the file name in CV02N-change document in application field
Hi Can anyone tell me what are the settings to be made in Document management system so that i'm able to change the application name(now if its an excel file its showing as excel file,instead of that,is it possible to change and give some name or des
-
Dynamically change the db and server in execute sql task
Pkg 2: Moves data from B_STG (Staging DB) to B_Det_STG (Staging DB) ---- option1 Pkg 3: Moves data from B_STG (Staging DB) to B_Det (PC DB) ---- option2 This part is duplicating in both the packages So they want me to merge both of them into in ex
-
Use AO and AI in the same program
Hello, I like write a program to use AO and AI in the same program. In this program write a timer a voltage to a AO port and after then it should read a voltage. I know how I write voltage to a AO port and read a voltage on a AI port, but not in a th
-
DBMS_OUTPUT.ENABLE(1000000);
Dear all, my DB is 10.2.0.4 I got an error message ORA-20000: ORU-10027: buffer overflow, limit of 20000 bytes. I saw a simmilar topic with the suggestion to put DBMS_OUTPUT.ENABLE(1000000); A quick question - if i have a package with several procedu